Manual Metz 36 AF-3C

41 pages 0.66 mb
Download

Go to site of 41

Summary
  • Metz 36 AF-3C - page 1

    TV . VIDEO. AUDIO. MEC ABLITZ MECABLITZ 36 AF-3 C/M/N Bedienungsanleitung Mode d’emploi Handleiding Operating Instructions Norme per l’uso Instrucciones del manejo 702 47 0059.A1 D,F,NL,GB,I,E 24.07.2002 8:42 Uhr Seite 1 ...

  • Metz 36 AF-3C - page 2

    82 Contents Indice Contenido 1. Safety instructions 90 2. Suppor ted dedicated functions 96 2.1 mecablitz 36 AF-3 C 96 2.2 mecablitz 36 AF-3 M 98 2.3 mecablitz 36 AF-3 N 100 3. Mounting the mecablitz 102 3.1 Mounting the mecablitz on the camera 102 3.2 Removing the mecablitz from the camera 104 4. Power supply 106 4.1 Suitable batteries 106 4.2 Rep ...

  • Metz 36 AF-3C - page 3

    84 Contents Indice Contenido 5.4.2 mecablitz 36 AF-3 M 122 5.4.3 mecablitz 36 AF-3 N 124 5.5 Zoom reflector 124 5.6 AF measuring beam 126 5.7 TTL flash mode 130 5.7.1 Automatic TTL fill-in flash in daylight 132 5.7.2 Matrix-controlled fill-in flash (Nikon) 136 5.7.3 Manual TTL flash exposure correction 136 5.8 Establishing the maximum flash range w ...

  • Metz 36 AF-3C - page 4

    86 Contents Indice Contenido 9. T echnical data 156 9.1 Guide number table for full light output, metric system 160 702 47 0059.A1 D,F,NL,GB,I,E 24.07.2002 8:42 Uhr Seite 86 ...

  • Metz 36 AF-3C - page 5

    88 Foreword Premessa Introducción Foreword W elcome to the large family of Metz customers! W e congra- tulate you on purchasing this flash unit and thank you for your confidence in our products. It is only natural that you should want to use your flash unit straight away . However , we recommend that you study these Operating Instructions beforeha ...

  • Metz 36 AF-3C - page 6

    90 Safety instructions Per la vostra sicurezza Instrucciones de seguridad 1. Safety instructions • The flash unit is exclusively intended and approved for photographic use! • Never fire a flash in the vicinity of flammable gases or liquids (petrol, solvents, etc.)! DANGER OF EXPLOSION! • Never take flash shots of car , bus or train drivers, o ...

  • Metz 36 AF-3C - page 7

    92 Safety instructions Per la vostra sicurezza Instrucciones de seguridad • Exhausted batteries should be immediately removed from the flash unit. Lye leaking out of spent batteries will dam- age the unit. • Never recharge dr y-cell batteries! • Do not expose the flash unit or batter y charger to dripping or splashing water (such as rain)! ? ...

  • Metz 36 AF-3C - page 8

    94 Safety instructions Per la vostra sicurezza Instrucciones de seguridad • Never disassemble the flashgun! DANGER: HIGH VOLT- AGE! There are no components inside the flashgun that can be repaired by a layman. • When taking a series of flash shots at full light output and fast recycling times as provided by NiCad batter y opera- tion, make sure ...

  • Metz 36 AF-3C - page 9

    96 Canon camera type Camera Canon Tipo de cámara Canon EOS 1, 1N, 100, 100QD, 600, 620, 630, 650, 650QD, 1000, 1000N, 1000F , 1000FN, 3000, REBEL, REBEL S, REBEL SII,EOS ELAN, EOS RT , EOS 88 EOS 700, 750, 850 EOS 1V , 3, 30, 33, 50, 50E, EOS 300, 500N, EOS ELAN II, ELAN IIE, ELAN 7E, EOS REBEL 2000, REBEL G, EOS New Kiss, Kiss III, EOS IX, IX E, ...

  • Metz 36 AF-3C - page 10

    98 Minolta camera type Camera Minolta Tipo de cámara Minolta Dynax / Maxxum 5, 7, 800si 700si, 650si, 600si 4, 505si super , 505si, XT si, HT si, 500si super , 500si, 400si, 404si,303si, 7xi, 5xi, 3xi, SPxi, 5000i, 5700i, V ectis S-1 •• • ◊◊ ◊ •• • •• • xx xx •• • •• • 2.2 mecablitz 36 AF-3 M • = Dedicated fun ...

  • Metz 36 AF-3C - page 11

    100 Nikon camera type Camera Nikon Tipo de cámara Nikon F70, N70, Pronea 600i, Pronea 6i F601, N6006 F601M, N6000 F5, F4s, F4, F100, F90X, N90S, F90, N90, F801s, F801, N8008s, N8008 F501, N2020, F401, N4004, F401s, N4004s, F301, N2000 F60, N60, F50, N50 F A, FE-2, FG, EM FM-3A •• • • • • • • •• • • • • • • •• ? ...

  • Metz 36 AF-3C - page 12

    102 Mounting the mecablitz Montaggio del mecablitz Montaje del mecablitz 3. Mounting the mecablitz 3.1 Mounting the mecablitz on the camera T urn of f the camera and the mecablitz by their main switch. mecablitz 36 AF-3 C and 36 AF-3 N • T urn the knurled nut against the mecablitz housing until the stop point is reached. • Slide the mecablitz f ...

  • Metz 36 AF-3C - page 13

    104 Mounting the mecablitz Montaggio del mecablitz Montaje del mecablitz 3.2 Removing the mecablitz from the camera T urn of f the camera and the mecablitz by their main switch. mecablitz 36 AF-3 C and 36 AF-3 N • T urn the knurled nut against the mecablitz housing until the stop point is reached. • Withdraw the mecablitz from the camera’ s a ...

  • Metz 36 AF-3C - page 14

    106 Power Supply Alimentazione Alimentación de corriente 4. Power supply 4.1 Suitable batteries The mecablitz can be operated with any of the following bat- teries: • 4 NiCad batteries, type IEC KR 15/51. They permit ver y fast recycling and are economical in use because they are rechargeable. • 4 nickel metal hydride batteries. They have a si ...

  • Metz 36 AF-3C - page 15

    108 Power Supply Alimentazione Alimentación de corriente 4.2 Replacing batteries The batteries are exhausted if the recycling time (elapsing from the triggering of a full-power flash to the moment the flash ready indicator lights up again) exceeds 60 seconds. • T urn off the mecablitz by its main switch. • Slide the battery compar tment cover ...

  • Metz 36 AF-3C - page 16

    110 Power Supply Alimentazione Alimentación de corriente Exhausted batteries must not be thrown in the dustbin! Help protect the environment and dispose of run-down batteries at the appropriate collecting points. 4.3 Switching the flash unit on and off The flash unit is switched on by its main switch. In the right “ON” position, the mecablitz ...

  • Metz 36 AF-3C - page 17

    112 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5. Dedicated functions and flash mode 5.1 Flash readiness indication The flash readiness symbol lights up on the mecablitz when the flash capacitor is charged, thereby indicating that flashes can be fired for the next shot. Flash rea ...

  • Metz 36 AF-3C - page 18

    114 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5.2 Automatic flash sync speed control Depending on the camera model and the selected mode, the camera’ s shutter speed automatically changes to flash sync speed when flash readiness is reached (see operating instructions for the g ...

  • Metz 36 AF-3C - page 19

    116 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash Only mecablitz 36 AF-3 M: When the flash unit is switched on with bright ambient light, ensure that in the Program P and Programmed Image Control Modes the shutter speed is not faster than the flash sync speed. In the event that the ...

  • Metz 36 AF-3C - page 20

    118 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash Please refer to the maximum flash range indicated on the aperture calculator of the mecablitz. Only mecablitz 36 AF-3 M: Following correct exposure the mecablitz transmits a signal to the camera with the result that correct exposure ...

  • Metz 36 AF-3C - page 21

    120 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5.4.1 mecablitz 36 AF-3 C • Flash symbol flashes: User is requested to use or switch on the flash unit. • Flash symbol lights up: mecablitz is ready for operation. Some cameras have a warning function in the viewfinder to indicat ...

  • Metz 36 AF-3C - page 22

    122 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5.4.2 mecablitz 36 AF-3 M • Flash symbol lights up (Flash readiness indication): Display is permanently illuminated or flashes slowly to indi- cate that the mecablitz is ready for firing. A flash will be fired when the camera’ s ...

  • Metz 36 AF-3C - page 23

    124 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5.4.3 mecablitz 36 AF-3 N • Green flash symbol illuminated: User is requested to use or switch on the flash unit. • Red flash symbol illuminated: Flash unit is ready for firing. • Red flash symbol remains illuminated after shoo ...

  • Metz 36 AF-3C - page 24

    126 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash The zoom reflector can be swivelled upwards into four lock- ing positions (e.g. for bounce flashes): 30°, 45°, 60° and 90°. For normal flash operation the reflector is in the horizontal position: 0°. 5.6 AF measuring beam The AF ...

  • Metz 36 AF-3C - page 25

    128 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash The striped pattern of the AF measuring beam only supports the camera’ s central AF sensor . When using cameras with several AF metering areas we therefore recommend to acti- vate the camera’ s central AF metering zone. Some came ...

  • Metz 36 AF-3C - page 26

    130 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5.7 TTL flash mode The mecablitz 36AF-3 is only suitable for the TTL flash mode. The TTL flash mode is a ver y simple way to achieve excellent flash shots. In this mode exposure readings are taken by a sensor built into the camera wh ...

  • Metz 36 AF-3C - page 27

    132 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash The TTL flash mode is supported by all camera modes (e.g. Full Auto Mode, Program P , Aperture Priority Mode “Av” or “A”, Shutter Priority Mode “Tv” or “S”, Programmed Image Control Modes, Manual Mode “M”, etc.). ...

  • Metz 36 AF-3C - page 28

    134 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash ground with contre-jour shots. The camera’ s computer-con- trolled metering system sets the most suitable combination of shutter speed, working aperture and flash output. Ensure that the contre-jour light source does not shine dire ...

  • Metz 36 AF-3C - page 29

    136 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5.7.2 Matrix-controlled fill-in flash (Nikon) Only with mecablitz 36 AF-3 N In this flash mode the subject and the background lighting are automatically balanced without overexposing the subject. The camera establishes the exposure s ...

  • Metz 36 AF-3C - page 30

    138 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash T o of fset this effect a correction value can be set on some cameras to manually match the TTL flash exposure to the photographic situation. The actual extent of correction depends on the contrast prevailing between subject and back ...

  • Metz 36 AF-3C - page 31

    140 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash 5.8 Establishing the maximum flash range with the aper ture calculator The maximum flash range of the mecablitz can be estab- lished by way of the aperture calculator in the control panel. • Set the “ISO” upper slide at the ISO ...

  • Metz 36 AF-3C - page 32

    142 Dedicated functions and flash mode Funzioni dedicate e modi flash Funciones dedicadas y funcionamiento del flash range to give the electronic circuit sufficient leeway for light control. Example: Settings: ISO 100, 50 mm, f/4 • The aperture calculator will indicate a maximum flash range of approx. 7.3 m. • The minimum distance to the subjec ...

  • Metz 36 AF-3C - page 33

    144 Programmed Auto Flash Mode Automatismo di programma flash Automatismo programado para flash 6. Programmed Auto Flash Mode In the programmed auto flash mode the camera automatical- ly controls the aperture, the shutter speed, and the mecablitz for optimal results in most photographic situations, including fill-in flash. Settings on the camera Se ...

  • Metz 36 AF-3C - page 34

    146 Flash techniques T ecniche lampo Técnicas de destello 7. Flash techniques 7.1 Bounce flash Photos shot with full frontal flash are easily recognized by their harsh, dense shadows. This is often associated with a sharp drop in light from the foreground to the background. This phenomenon can be avoided with bounce flash because the diffused ligh ...

  • Metz 36 AF-3C - page 35

    148 Flash techniques T ecniche lampo Técnicas de destello The light bounced off the reflecting sur faces produces a soft and uniform illumination of the subject. The reflecting surface must be white or have a neutral colour , and it must not be structured, e.g. wooden beams in a ceiling as these might cause shadows. For colour effects just select ...

  • Metz 36 AF-3C - page 36

    150 Flash techniques T ecniche lampo Técnicas de destello 7.2 Flash synchronisation 7.2.1 Normal synchronisation In normal synchronisation the mecablitz is triggered at the beginning of the exposure time (1st curtain synchronisation). Normal synchronisation is the standard mode on all cameras, and is suitable for most flash shots. Depending upon t ...

  • Metz 36 AF-3C - page 37

    152 Flash techniques T ecniche lampo Técnicas de destello gives a more realistic impression of movement because the light streaks behind the light source instead of building up in front of it, as is the case when the flash is synchronised with the 1st shutter curtain! Depending on its operating mode, the camera uses shutter speeds slower than its ...

  • Metz 36 AF-3C - page 38

    154 Maintenance and care Cura e manutenzione Mantenimiento y cuidados night shots program, etc.) or permit slow synchronisation to be set (see camera’ s instruction manual). Use a tripod to avoid camera shake with slow shutter speeds! 8. Maintenance and care Remove any grime and dust with a soft, dr y or silicon-treated cloth. Never use detergent ...

  • Metz 36 AF-3C - page 39

    156 T echnical Data Dati tecnici Características técnicas Metz does not accept any liability for faulty functions or damage to the mecablitz caused by the use of accessories from other manufacturers! 9. T echnical data Zoom reflector positions: 28 mm - 35 mm - 50 mm - 85 mm T ilting range and locking positions of flash head: vertically 30° - 45? ...

  • Metz 36 AF-3C - page 40

    158 T echnical Data Dati tecnici Características técnicas Recycling time (at full light output): approx. 5 s with NiCad batteries approx. 5 s with high-capacity alkaline manganese batteries Dimensions (w x h x d): 73 x 110 x 87 mm W eight: 205 g without batteries Included: mecablitz, Operating Instructions 702 47 0059.A1 D,F,NL,GB,I,E 24.07.2002 ...

  • Metz 36 AF-3C - page 41

    160 T echnical Data Dati tecnici Características técnicas Guide number (ft) =Guide number (m) x 3.3 Numero guida (ft) = numero guida (m) x 3,3 Número guía (ft) = número guía (m) x 3,3 9.1 Guide number table for full light output, metric system ISO / DIN Zoom position of reflector 28.0 35.0 50.0 85.0 25/15° 10.0 12.0 15.0 18.0 32/16° 11.3 13 ...

Manufacturer Metz Category Camera Flash

Documents that we receive from a manufacturer of a Metz 36 AF-3C can be divided into several groups. They are, among others:
- Metz technical drawings
- 36 AF-3C manuals
- Metz product data sheets
- information booklets
- or energy labels Metz 36 AF-3C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Metz 36 AF-3C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Metz 36 AF-3C, service manual, brief instructions and user manuals Metz 36 AF-3C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Metz 36 AF-3C.

Similar manuals

A complete manual for the device Metz 36 AF-3C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Metz 36 AF-3C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Metz 36 AF-3C.

A complete Metz manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Metz 36 AF-3C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Metz 36 AF-3C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Metz 36 AF-3C, that we can find in the current document
3. Tips how to use the basic functions of the device Metz 36 AF-3C - which should help us in our first steps of using Metz 36 AF-3C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Metz 36 AF-3C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Metz 36 AF-3C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Metz 36 AF-3C?

Use the form below

If you did not solve your problem by using a manual Metz 36 AF-3C, ask a question using the form below. If a user had a similar problem with Metz 36 AF-3C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)