Manual Capresso Impressa J5

36 pages 0.27 mb
Download

Go to site of 36

Summary
  • Capresso Impressa J5 - page 1

    Operating Instructions and W arranty Customer Service 1-800-220-5701 Impr essa J5 Fully Automatic Cof fee & Espr esso Center with Clearyl W ater Care System CAPRESSO ...

  • Capresso Impressa J5 - page 2

    IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fir e, electric shock and personal injury , do not immerse cord, plugs or appliance in water or other liquids. 4. C ...

  • Capresso Impressa J5 - page 3

    Notice: Y our Impressa J5 has a 3-pr ong grounded plug. T o reduce the risk of electrical shock this plug will fit in an outlet only one way . If the plug does not fit in the outlet contact a qualified electrician. DO NOT modify the plug in any way . CAUTION This appliance is for household use only . Any servicing other than cleaning and user maint ...

  • Capresso Impressa J5 - page 4

    1. Bean container lid 2. Storage lid 3. Storage compartment 4. Control panel (see Fig. 2) 5. Beverage buttons (see Fig. 3) 6. frothXpr ess 7. Dual coffee spouts 8. Used coffee container 9. Removable tray 10. Stainless steel grid 11. Removable drawer 12. Measuring scoop (inside storage compartment) 13. Dual Frother Plus (inside storage compartment) ...

  • Capresso Impressa J5 - page 5

    5. ® Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 On/Off Button Rotary Dial Push Button Rinse Button Bean Aroma Lid Grind Selector 1 Espresso 2 Espressi Hot W ater Steam 1 Coffee 2 Coffees Beverage Buttons Coffee spouts down and together C APRESSO Bean Container Lid finer coarser ...

  • Capresso Impressa J5 - page 6

    6. Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 Fig. 16 Fig. 17 Fig. 18 Fig. 19 Fig. 20 Steaming up Frothing down Frothing range 12 to 2 o'clock Steaming range 4 to 6 o'clock Chrome Nozzle Steam only no siphoning DIAL V enting tip Milk Hose Steam nozzle Dual Frother Plus ...

  • Capresso Impressa J5 - page 7

    7. Fig. 21 Fig. 22 Fig. 23 Fig. 24 Fig.25 Fig. 26 Fig. 27 Fig. 28 Fig. 29 Fig. 30 Tip Sleeve Rod Extension Rod ...

  • Capresso Impressa J5 - page 8

    T able of Contents 8. Important Safeguards......................................................... 2 Customer Service Information ........................................... 3 Illustrations ...................................................................... 4-7 1. Product W arranty Registrations ............................ 10 2. Quick Referenc ...

  • Capresso Impressa J5 - page 9

    9. T able of Contents 14. W ater Care ............................................................ 20 15. CLEAR YL water filter cartridge ......................... 21 15.1 Installing and activating the CLEAR YL filter ......... 21 15.2 Automatic CLEAR YL replacement .........................22 15.3 Manual CLEAR YL replacement....................... ...

  • Capresso Impressa J5 - page 10

    1. PRODUCT WARRANTY REGISTRA TION Please remove the Pr oduct Registration from the WELCOME P ACK, fill it out and mail or fax it to us within two weeks after purchasing your machine or r egister your product online thr ough our website: www .capresso.com. Important: This r egistration is part of your warranty (chapter 26). In case your retailer sen ...

  • Capresso Impressa J5 - page 11

    black or white finish. The cup/coffee illumination lets you enjoy the coffee pr eparation (Fig.1.13a). Enjoy your Impressa J5! 3.1 BEAN-TO-CUP / “CREMA COFFEE" / HIGH PRESSURE BREWING According to the majority of cof fee experts, grinding the beans just before br ewing, tamping and brewing under high pr essure is the ideal extracting process ...

  • Capresso Impressa J5 - page 12

    • Never fill anything other than cof fee beans into the bean container (no chocolate, rice, nuts, spices, etc.) • Never fill anything but fr esh, cold clean water into the water container , except when decalcifying (chapter 18.3). • Never use mineral or carbonated water . Y ou can use tap water , bottled water , spring water , distilled water ...

  • Capresso Impressa J5 - page 13

    6.1 TURNING THE MACHINE ON • Pr ess the Main Power Switch at the bottom right in front of the power cord (Fig. 1a). The On/Of f button on top of the machine illuminates in red (Fig. 2), indicating that the main power switch was turned on. • Push the On/Of f button on top of the machine. The display will illuminate. FILL WA TER T ANK 6.2 FILLING ...

  • Capresso Impressa J5 - page 14

    remind you via the display when to r efill the beans before the bean container is completely empty . • Fill beans into the bean container . • Place a cup underneath the Dual Coffee Spout and push the 1-cup Espresso Button (Fig. 3). The machine starts grinding and brewing. The display may still show FILL BEANS . • Push the 1-cup Espr esso Butt ...

  • Capresso Impressa J5 - page 15

    Extremely Hot Cof fee: If you like your coffee even hotter you can inject steam. This will make the crema disappear . • Slip on the Dual Frother Plus (Fig. 18) • Push the Steam button (Fig. 3). The display shows HEA TING . After a few seconds the display shows READY . • Immerse the tip of the Dual Frother into your cup of cof fee and push the ...

  • Capresso Impressa J5 - page 16

    • For the hot water button you can override the water volume. • For the steam button you can override the steam duration. Important: • Y ou always override the coffee str ength, before you push one of the single-cup buttons. • Cof fee and Hot W ater volume as well as steam duration you override after you push any of the beverage buttons. Ex ...

  • Capresso Impressa J5 - page 17

    • READY Place one or two cups under the Dual Coffee Spouts. • Open the Lid for Gr ound Coffee (Fig. 11). Opening this lid automatically disengages the grinder . The display shows repeatedly FILL PRE-GROUND . • Add one or two level scoops of pre-gr ound coffee into the funnel and close the lid. The display shows SELECT BUTTON . • Push any of ...

  • Capresso Impressa J5 - page 18

    12.1.1 MAKING CAPPUCCINO AND LA TTE • Pr e-warm your cappuccino cup. • Place your cup underneath the frothXpress (Fig. 15). • Push the steam button (Fig. 3 ) HEA TING . It will take a few seconds for the system to be ready for steam. • Make sur e the dial of the frothXpr ess is in the range between 12 and 2 o’clock. • When the display s ...

  • Capresso Impressa J5 - page 19

    12.1.4 CLEANING THE FROTHXPRESS After frothing, a few dr ops of milk are still inside the fr othXpress. 12.1.5 QUICK RINSE If you don’t use the fr othXpress within the next half hour ther e is a quick and easy way remove those milk deposits. • Place a cup underneath the frothXpress • Place a cup with some cold water next to the machine and in ...

  • Capresso Impressa J5 - page 20

    Tips for frothing (Cappuccino): The tip of the frother should not touch the bottom of your pitcher . Start in the steaming position – cylinder "up" (Fig. 19) – for a few seconds. Then push the cylinder "down". Milk froth will build up. This way the froth on top of your milk is also warm. If the fr othed milk is not warm enou ...

  • Capresso Impressa J5 - page 21

    IMPORT ANT : do not use carbonated water or any other liquid in the water tank. Y ou have the following options to take care of the water . • Clearyl W ater Filter Cartridge (chapter 15). • Decalcifying System (chapter 18.3). Y our machine is pre-set in the factory to automatically remind you to decalcify based on a water hardness of Level 2. Y ...

  • Capresso Impressa J5 - page 22

    15.2 AUTOMA TIC CLEARYL REPLACEMENT Eventually the filter needs to be replaced. Over time and depending on the amount of water , the filter will cease to work. The machine cannot monitor the time aspect. It monitors the water volume. After approx. 75 liters of water use (~2,500 oz.) the display shows alternating READY FIL TER and the rinse button i ...

  • Capresso Impressa J5 - page 23

    • Insert the stick for one second into the water you want to use. Shake off any access water and wait for one minute. • If all five fields of the test stick turn reddish, set the hardness level to 5 squares. If four fields turn reddish, set the har dness level to 4 squares and so on. Please note: If you use Spring W ater or Bottled Water you ca ...

  • Capresso Impressa J5 - page 24

    17.1 OPTIONAL CLEANING CYCLES The J5 has built-in maintenance programs which automatically remind you when it is time to perform them. Y ou can also choose to perform these programs outside the pr ogrammed cycles. This comes handy if you have not used the machine for a long time or for reasons mentioned below . T o access these maintenance programs ...

  • Capresso Impressa J5 - page 25

    25. Y ou can also program the output visually (chapter 11.2). Y ou can also re-program all buttons to dif ferent values. Re-pro- gramming changes the outcome of the beverage permanently . Re-programming is easy . The re-pr ogrammed values are stor ed in the machine’ s memory until you re-program it again. Example : The 1-cup espresso button is se ...

  • Capresso Impressa J5 - page 26

    READY , • Push and hold the Rotary Dial until the display shows RINSE . • T ur n the dial clockwise until the display shows ENERGY – . • Push the r otary dial. The display shows SA VE – • T ur n the dial until the display shows SA VE ✓ . • Push the r otary dial. For two seconds the display shows OK and then ENERGY ✓ . • T urn th ...

  • Capresso Impressa J5 - page 27

    • If you use the machine all day change the setting to the lar gest use interval, e.g. 4 hours. This way the machine is always ready to br ew coffee. Changing the AUTO-OFF setting: READY , • Push and hold the r otary dial until the display shows RINSE . • T ur n the dial clockwise until the display shows AUTO OFF . • Push the r otary dial. ...

  • Capresso Impressa J5 - page 28

    17.9 CHANGING THE LANGUAGE Y our J5 is set to ENGLISH . Y ou can the display from English to French ( FRANCAIS ), Italian ( IT ALIANO ), Dutch ( NL ) or German ( DEUTSCH ) READY • Push and hold the r otary dial until the display shows RINSE . • T ur n the dial clockwise until the display shows LANGUAGE . • Push the r otary dial. The display s ...

  • Capresso Impressa J5 - page 29

    beans deposit more oils into the br ewing chamber . When this happens you can manually start a tablet cleaning cycle as follows: READY • Push the rotary dial, until the display shows RINSE . • Push the r otary dial again and turn it until the display shows CLEAN . • Push the r otary dial again to confirm that you want to use this program now ...

  • Capresso Impressa J5 - page 30

    13. The machine pumps the fresh water thr ough the system and through the steam nozzle. During this operation, the Rinse button blinks. 14. When the display shows EMPTY TRA Y , remove the container and then the drawer and tray . 15. Empty the drawer and the ground cof fee container . 16. Replace the Dual Frother or the fr othXpress. HEA TING . READ ...

  • Capresso Impressa J5 - page 31

    short coffee and discar d. The next cup will taste a lot better . • Always pr e-warm your cup with hot water (chapter 10). • Keep the cof fee spouts as close as possible to the cups to maximize crema. 20.1 AUTOMA TED CLEANING PROGRAMS The J5 has four automated programs. When it’ s time the display will remind you to perform those pr ograms. ? ...

  • Capresso Impressa J5 - page 32

    FILL BEANS . The bean container is (almost) empty . Add beans to the bean container . FILL WA TER T ANK . The water tank is (almost) empty . Add water to the water tank. CLOSE COVER . The lid for the ground cof fee funnel is open. Close the lid (Fig. 11) NOT ENOUGH PRE-GROUND . There is not enough pr e-ground cof fee in the funnel. See chapter 11.3 ...

  • Capresso Impressa J5 - page 33

    D. THE DISPLA Y READS " FILL WA TER " BUT THERE IS ENOUGH WA TER IN THE WA TER T ANK. Reason: The “low water” floatation device is missing. Solution: Within the water tank is a small compartment (like a mouse trap). Inside is a small black floatation device. On top is a small clear see-through plastic cover . This small plastic cover ...

  • Capresso Impressa J5 - page 34

    Y our machine is too cold. The heating sensor does not react. T urn the machine off. Keep the machine at normal room temperature (65º F or higher) for 2 hours. Then turn it on again. If the display still shows ERROR 2 or ERROR 4 call customer service. ERROR 6 , ERROR 7 T urn machine off, turn the main power switch off and unplug machine for a minu ...

  • Capresso Impressa J5 - page 35

    • with the enclosed mail order form, • through our website www .capresso.com or • by calling our customer service center at 1-800-220-5701. Clearyl W ater Filter Cartridge (chapter 16). One filter included; Model #64553; The machine will remind you automatically when to r eplace. Tip : If you brew 10 cups a day you need about one Clearyl cart ...

  • Capresso Impressa J5 - page 36

    Capresso Dealer . (Call our customer service department to check for authorized dealers). • Any machine pur chased through EBA Y . • Damage caused by accident, abuse, negligence, misuse, • impr oper operation or failure to follow instructions contained in this manual. • Any service or alteration performed by an unauthorized person, company ...

Manufacturer Capresso Category Coffeemaker

Documents that we receive from a manufacturer of a Capresso Impressa J5 can be divided into several groups. They are, among others:
- Capresso technical drawings
- Impressa J5 manuals
- Capresso product data sheets
- information booklets
- or energy labels Capresso Impressa J5
All of them are important, but the most important information from the point of view of use of the device are in the user manual Capresso Impressa J5.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Capresso Impressa J5, service manual, brief instructions and user manuals Capresso Impressa J5. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Capresso Impressa J5.

Similar manuals

A complete manual for the device Capresso Impressa J5, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Capresso Impressa J5 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Capresso Impressa J5.

A complete Capresso manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Capresso Impressa J5 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Capresso Impressa J5, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Capresso Impressa J5, that we can find in the current document
3. Tips how to use the basic functions of the device Capresso Impressa J5 - which should help us in our first steps of using Capresso Impressa J5
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Capresso Impressa J5
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Capresso Impressa J5 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Capresso Impressa J5?

Use the form below

If you did not solve your problem by using a manual Capresso Impressa J5, ask a question using the form below. If a user had a similar problem with Capresso Impressa J5 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)