English dropdown-ico

Manual Infiniti QX60 (2014)

547 pages Not applicable
Download

Go to site of 547

Summary
  • Infiniti QX60 (2014) - page 1

    2014 Infiniti QX60 Owner’s M anual Printing: June 2013 (04) / OM14E 0L50U0 / Printed in U.S.A. For y our safety , r ead c arefully and keep in thi s v ehicle. 2014 Infiniti QX60 1335541_EN_QX60_JX_OM.indd 1 5/14/13 2:28 PM ...

  • Infiniti QX60 (2014) - page 2

    Owner’s Manual Supplement Rev i sed P ARKING SENSOR AND REAR SONAR OPERA TION WITHOUT AROUND VIEW ® MONITOR. The information cont ained within this supplement revises the Front and Rear Sonar Operation information in the Parking Sensor and Rear Sonar section of the 2014 QX60 Owner’s Manual. Re ad careful ly and k eep in vehicle. Printing: Janu ...

  • Infiniti QX60 (2014) - page 3

    FRONT AND REAR SONAR, WITHOUT AROUND VIEW® MONITOR (parking sensor) (rear center sonar if so equipped) The sonar (parking sensor) sounds a tone to in- form the driver of obstacles near the bumper. WARNING ● The sonar (parking sensor) is a convenienc e featur e. It is not a substitute for proper parking. ● The driver is a lways responsible for ...

  • Infiniti QX60 (2014) - page 4

    When the objects are detect ed, the tone sounds intermittently. When the vehicle moves closer to the object, the rate of the tone increases. When the vehicle is ver y close to the object, the tone sounds continuously. The intermittent tone will stop after three sec- onds when an object is detected by only the cor- ner sonar and the distance does no ...

  • Infiniti QX60 (2014) - page 5

    Y our INFINITI represents a new way of thinking about vehicle design. It integrates advanced en- gineering and superior craftsmanship with a simple, refined aesthetic sensitivity associated with traditional Japanese culture. The result is a different notion of luxury and beauty . The car itself is important, but so is the sense of harmony that the ...

  • Infiniti QX60 (2014) - page 6

    ON-P AVEMENT AND OFF-ROAD DRIVING This vehicle will handle and maneuver differently from an ordinary passenger car because it has a higher center of gravity for off-road use. As with other vehicles with features of this type, fail- ure to operate this vehicle correctly may result in loss of control or an accident. Be sure to read “On-pavement and ...

  • Infiniti QX60 (2014) - page 7

    CALIFORNIA PROPOSITION 65 W ARNING WARNING Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of Cali- fornia to cause cancer and birth defects or other reproductive harm. In addition, cer- tain fluids contained in vehicles and cer- tain products of component wear contain or emit ch ...

  • Infiniti QX60 (2014) - page 8

    INFINITI CARE S... Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your INFINITI retailer are our primary concerns. Y our INFINITI retailer is always available to assist you with all your automobile sales and service needs. However, if there is something that your ...

  • Infiniti QX60 (2014) - page 9

    T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer in ...

  • Infiniti QX60 (2014) - page 10

    ...

  • Infiniti QX60 (2014) - page 11

    0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check ...

  • Infiniti QX60 (2014) - page 12

    1. Folding 3rd row bench (P . 1-21) 2. Folding 2nd row bench (P . 1-20) 3. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-53) 4. Seat belts (P . 1-23) 5. Head restraints/headrests (P .1-8) 6. Supplemental front-impact air bags (P .1-53) 7. Seats (1st row) (P . 1-2) 8. Occupant classification sensor (weight sensor) (P .1-6 ...

  • Infiniti QX60 (2014) - page 13

    1. Front camera (if so equipped) (P . 4-29) 2. Engine hood (P . 3-20) 3. Windshield wiper and washer switch, wiper blades (P . 2-26, 8-18) 4. Windshield-washer fluid (P . 8-18) 5. P ower windows (P . 2-50) 6. Door locks, INFINITI Intelligent Key , Remote Engine Start (if so equipped) , keys (P . 3-4, 3-7, 3-18,3-2) 7. Mirrors, side camera (if so eq ...

  • Infiniti QX60 (2014) - page 14

    1. Moonroof, Panoramic sunshade (if so equipped) (P . 2-52, 2-54) 2. Antenna (P .4-96) 3. Rear window wiper and washer switch (P . 2-29) 4. Corner sensors (if so equipped) (P . 4-34) 5. Liftgate release (P . 3-23) 6. Rear camera: Rearview monitor, A VM rear camera (P .4-24, 4-29 ) 7. Replacing bulbs (P . 8-25) 8. Fuel-filler cap, fuel recommendatio ...

  • Infiniti QX60 (2014) - page 15

    1. Moonroof, Panoramic sunshade (if so equipped) (P . 2-52, 2-54) 2. Storage (P . 2-43) 3. Map lights (P . 2-56) 4. Sun visors (P . 3-28) 5. Glove box, Console box (P . 2-46) 6. Seats (P . 1-2, 1-5, 1-7) 7. Cup holders (P . 2-45) 8. Luggage hooks (P . 2-48) See the page number indicated in paren- theses for operating details. LII2033 P ASSENGER COM ...

  • Infiniti QX60 (2014) - page 16

    1. V ent (P . 4-46) 2. Headlight/fog light/turn signal switch (P . 2-30) 3. Instrument brightness control (P . 2-34) 4. Meters, gauges, warning/indicator lights and V ehicle Information Display (P . 2-4, 2-7, 2-14) 5. Driver supplemental air bag/Horn (P .1-53, P . 2-35) 6. Back -up Collision Intervention (BCI) system switch (if so equipped) (P .5-3 ...

  • Infiniti QX60 (2014) - page 17

    23. Ignition switch (P . 5-12) 24. Cruise control main/set switches (if so equipped) and Intelligent cruise control main/set switches (if so equipped) (P . 5-51, P .5-53) 25. Dynamic Driver Assistance switch (if so equipped) (P . 5-72) 26. Tilt steering wheel control (P . 3-27) 27. Bluetooth® Hands-Free Phone System (P . 4-109, 4-123) 28. Steering ...

  • Infiniti QX60 (2014) - page 18

    VQ35DE engine 1. P ower steering fluid reservoir (P . 8-12) 2. Engine coolant reservoir (P . 8-7) 3. Drive belt location (P . 8-16) 4. Fuse box (P . 8-21 ) 5. Engine oil filler cap (P . 8-10) 6. Brake fluid reservoir (P . 8-12) 7. Air cleaner (P . 8-18) 8. Fuse box (P . 8-21) 9. Fuse box/Fusible links (P . 8-21) 10. Fuse box (P . 8-21) 11. Battery ...

  • Infiniti QX60 (2014) - page 19

    W arning light Name Page Anti-lock Braking System (ABS) warn- ing light 2-7 or Brake warning light 2-8 Charge warning light 2-8 Low tire pressure warning light 2-8 Master warning light 2-10 P ower steering warning light 2-10 Seat belt warning light and chime 2-11 W arning light Name Page Supplemental air bag warning light 2-11 Indicator light Name ...

  • Infiniti QX60 (2014) - page 20

    MEMO 0-10 Illustrated table of contents ...

  • Infiniti QX60 (2014) - page 21

    1 Safety—Seats, seat belts and supplemental restraint system Seats . ...........................................1 - 2 Front power seat adjustment . . ...................1 - 3 2nd row bench seat adjustment ..................1 - 5 3rd row bench seat adjustment ..................1 - 7 1st row head restraints/headrests ................1 - 8 2nd row h ...

  • Infiniti QX60 (2014) - page 22

    WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti ...

  • Infiniti QX60 (2014) - page 23

    FRONT POWER SEA T ADJUSTMENT Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery. See “ Automatic drive posi ...

  • Infiniti QX60 (2014) - page 24

    Seat lifter Push the switch up or push down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides adjustable lower back support to the driver. Move the lever up or down (manual) or move the switch forward or backward (power) to adjust the seat lumbar area. LRS2131 Manual (if so equi ...

  • Infiniti QX60 (2014) - page 25

    2ND ROW BENCH SEA T ADJUSTMENT Forward and backward Pull the center of the bar 䊊 1 up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining T o recline the seatback, pull up on the lever 䊊 2 and lean back. T o bring the seatback forward, pull the lever 䊊 2 up ...

  • Infiniti QX60 (2014) - page 26

    CAUTION ● Be careful not to pinch your hand or foot or bump your head when operating the walk -in seat. ● Do not drive with the 2nd row seat tipped up. ● Be careful not to allow the 2nd row seat to pinch, hit any part of your body or other people when operating the 2nd row seat. Make sure the seat path is clear of all objects before moving th ...

  • Infiniti QX60 (2014) - page 27

    WARNING When returning the seat to its original position, confirm that the seat and seat- back are locked properly. Be careful not to pinch your hand or foot or bump your head when operating the walk -in seat. 3RD ROW BENCH SEA T ADJUSTMENT Reclining T o recline the seatback, pull up on the latch located on the outside corner of each seatback. Lean ...

  • Infiniti QX60 (2014) - page 28

    1ST ROW HEAD RESTRAINTS/ HEADRESTS WARNING ● Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end colli- sions. Adjust the head restraints/headrests properly, as speci- fied in this section. Check the adjust- ment after someone else uses the seat. Do not a ...

  • Infiniti QX60 (2014) - page 29

    Adjustable head restraint/headrest components 1. Removable head restraint/headrest 2. Multiple notches 3. Lock knob 4. Stalks Non-adjustable head restraint/ headrest components 1. Removable head restraint/headrest 2. Single Notch 3. Lock knob 4. Stalks Removable (without Dual head restraint/headrest DVD system only) CAUTION Do not remove head restr ...

  • Infiniti QX60 (2014) - page 30

    Use the following procedure to remove the head restraints/headrests 1. Pull the head restraint/headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint/headrest from the seat. 4. Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle. 5. Reinstall and properly adjust t ...

  • Infiniti QX60 (2014) - page 31

    For non-adjustable head restraint/ headrest Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. T o raise the head restraint/headrest, pull it up Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding i ...

  • Infiniti QX60 (2014) - page 32

    2ND ROW HEAD RESTRAINTS/ HEADRESTS WARNING ● Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end colli- sions. Adjust the head restraints/headrests properly, as speci- fied in this section. Check the adjust- ment after someone else uses the seat. Do not a ...

  • Infiniti QX60 (2014) - page 33

    Adjustable head restraint/headrest components 1. Removable head restraint/headrest 2. Multiple notches 3. Lock knob 4. Stalks Non-adjustable head restraint/ headrest components 1. Removable head restraint/headrest 2. Single Notch 3. Lock knob 4. Stalks Removable Use the following procedure to remove the head restraints/headrests 1. Pull the head re ...

  • Infiniti QX60 (2014) - page 34

    Install 1. Align the head restraint/headrest stalks with the holes in the seat. Make sure the head restraint/headrest is facing the correct di- rection. The stalk with the notch (notches) 䊊 1 must be installed in the hole with the lock knob 䊊 2 . 2. Push and hold the lock knob and the head restraint/headrest down. 3. Properly adjust the head re ...

  • Infiniti QX60 (2014) - page 35

    T o raise the head restraint/headrest, pull it up Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so the lock knob i ...

  • Infiniti QX60 (2014) - page 36

    The illustration shows the seating positions equipped with head restraints/headrests. The third row head restraints are removable but not adjustable. 䉱 Indicates the seating position is equipped with a head restraint. 䡲 Indicates the seating position is equipped with a headrest. + Indicates the seating position is not equipped with a head restr ...

  • Infiniti QX60 (2014) - page 37

    Non-adjustable head restraint/ headrest components 1. Removable head restraint/headrest 2. Single Notch 3. Lock knobs 4. Stalks Removable Use the following procedure to remove the head restraints/headrests 1. Pull the head restraint/headrest up to the highest position. 2. Push and hold the lock knobs. 3. Remove the head restraint/headrest from the ...

  • Infiniti QX60 (2014) - page 38

    For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position. For non-adjustable head restraint/ headrest Make sure the head restraint/headrest is posi- tion ...

  • Infiniti QX60 (2014) - page 39

    T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. Folding head restraints/headrests T o fold the head restraint/headrest, pull the strap located on the rear of the head res ...

  • Infiniti QX60 (2014) - page 40

    ● Head restraints/headrests should be adjusted properly as they may provide significant protection against injury in an accident. Always replace and adjust them properly if they have been re- moved for any reason. ● If the head restraints/headrests are re- moved for any reason, they should be securely stored to prevent them from causing injury ...

  • Infiniti QX60 (2014) - page 41

    Folding the 3rd row seats T o fold the 3rd row seats flat for maximum cargo capacity: 1. Pull the strap 䊊 1 to release the head restraint/headrest forward. 2. Stow the 3rd row seat belts in the seat belt hooks 䊊 4 found on the sides of the cargo area. 3. Pull up on the latch 䊊 2 located in the upper corner of each seatback and lower the seat- ...

  • Infiniti QX60 (2014) - page 42

    CAUTION When folding or returning the seat(s) to the upright position, to avoid injury to yourself and others: ● Make sure that the seat path is clear before moving the seat. ● Be careful not to allow hands or feet to get caught or pinched in the seat. Before operating the 3rd row seats: ● Make sure the 2nd row seatback isn’t re- clined. ? ...

  • Infiniti QX60 (2014) - page 43

    PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. INFINITI strongly encourages you and all of your passen- gers to buckl ...

  • Infiniti QX60 (2014) - page 44

    WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a ...

  • Infiniti QX60 (2014) - page 45

    WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NOT THE WAIST . A lap belt worn too h ...

  • Infiniti QX60 (2014) - page 46

    PREGNANT WOMEN INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as pos- sible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your abdominal area. Contact your doctor for specific r ...

  • Infiniti QX60 (2014) - page 47

    ● For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat belt properly. ● Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Re- tractor (ALR) mode seat belts. If the s ...

  • Infiniti QX60 (2014) - page 48

    䊊 3 P osition the lap belt portion low and snug on the hips as shown. 䊊 4 Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger seat and the rear seating positions three-point seat belts have two modes of operation: ● Emerge ...

  • Infiniti QX60 (2014) - page 49

    T o increase your confidence in the seat belts, check the operation as follows. ● Grasp the shoulder belt and pull forward quickly . The retractor should lock and re- strict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt opera- tion, see an INFINITI retailer . Shoulder belt hei ...

  • Infiniti QX60 (2014) - page 50

    Seat belt hook When the seat belt is not in use and when folding down the rear seats, hook the rear seat belts on the seat belt hooks. SEA T BEL T EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lap/shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available t ...

  • Infiniti QX60 (2014) - page 51

    WARNING Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Retrac- tor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode activated, the child can be seriously injured or killed if the seat belt retracts and becomes tight. This can occur even i ...

  • Infiniti QX60 (2014) - page 52

    SMALL CHILDREN Children that are over 1 year old and weigh at least 20 lbs (9 kg) should remain in a rear-facing child restraint as long as possible up to the height or weight limit of the child restraint. Children who outgrow the height or weight limit of the rear- facing child restraint and are at least 1 year old should be secured in a forward-f ...

  • Infiniti QX60 (2014) - page 53

    WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions ...

  • Infiniti QX60 (2014) - page 54

    This vehicle is equipped with a universal child restraint anchor system, referred to as the LA TCH (Lower Anchors and T ethers for CHildren) sys- tem. Some child restraints include rigid or webbing-mounted attachments that can be con- nected to these anchors. For details, see “LA T CH (Lower Anchors and T ethers for CHildren) sys- tem” later in ...

  • Infiniti QX60 (2014) - page 55

    The LA T CH lower anchor points are provided to install child restraints in the following positions only: ● 2nd row bench seat – outboard seating positions LA T CH lower anchor WARNING Failure to follow the warnings and instruc- tions for proper use and installation of child restraints could result in serious in- jury or death of a child or oth ...

  • Infiniti QX60 (2014) - page 56

    LA T CH lower anchor location The LA T CH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH lower anchors. Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that ...

  • Infiniti QX60 (2014) - page 57

    T op tether anchor WARNING Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or cargo that contacts the top tether strap may damage it during a collision. A child could be seriously injured or kill ...

  • Infiniti QX60 (2014) - page 58

    REAR-F ACING CHILD RESTRAINT INST ALLA TION USING LA T CH Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint in the 2nd row seats using the LA T CH system: WARNING Child restraint anchorages are designed t ...

  • Infiniti QX60 (2014) - page 59

    3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 4. After attaching the ...

  • Infiniti QX60 (2014) - page 60

    REAR-F ACING CHILD RESTRAINT INST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in ...

  • Infiniti QX60 (2014) - page 61

    2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s in- structions for belt routing. 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retrac ...

  • Infiniti QX60 (2014) - page 62

    5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restrain ...

  • Infiniti QX60 (2014) - page 63

    2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA TCH attachment is prop- erly attached to the lower anchors. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor point. See “Installing top tether strap” in ...

  • Infiniti QX60 (2014) - page 64

    4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 5. Tighten the tether ...

  • Infiniti QX60 (2014) - page 65

    Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be ...

  • Infiniti QX60 (2014) - page 66

    4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in ...

  • Infiniti QX60 (2014) - page 67

    8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 in (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint is ...

  • Infiniti QX60 (2014) - page 68

    1. T op tether strap 2. Anchor point INST ALLING T OP TETHER STRAP (2nd row bench seat) First, secure the child restraint with the LA T CH lower anchors (2nd row bench outboard seating positions only) or the seat belt, as applicable. 1. OUTBOARD SEA TING POSITIONS If necessary, raise or remove the head restraint/headrest to position the top tether ...

  • Infiniti QX60 (2014) - page 69

    1. T op tether strap 2. Anchor point INST ALLING T OP TETHER STRAP (3rd row bench seat) WARNING In the 3rd row bench seat, a child restraint with a top tether strap can only be used on the passenger side seating position. Do not place in the driver’s side seating posi- tion and attempt to angle the tether strap to the passenger side seating posit ...

  • Infiniti QX60 (2014) - page 70

    Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. ● Check the booster seat in your vehicle to ...

  • Infiniti QX60 (2014) - page 71

    ● Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears. For example, if a low back booster seat 䊊 1 is chosen, the vehicle seatback must be at or above the center of the child’s ears. If the seatback is lower than the center of the child? ...

  • Infiniti QX60 (2014) - page 72

    3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary , adjust or remove the head restraint/headrest to obtain the correct booster seat fit. If the head restraint/headrest is removed, store it in a secure place. Be sure to reinstall the head restraint/headrest when the booster seat is removed. See “Head r ...

  • Infiniti QX60 (2014) - page 73

    PRECAUTIONS ON SUPPLEMENT AL RESTRAINT S Y STEM This Supplemental Restraint System (SRS) sec- tion contains important information concerning the following systems: ● Driver and passenger supplemental front- impact air bag (INFINITI Advanced Air Bag System) ● Front seat-mounted side-impact supple- mental air bag ● Roof-mounted curtain side-imp ...

  • Infiniti QX60 (2014) - page 74

    WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. ● The front passenger air bag will not inflate if the passenger air bag status light is lit ...

  • Infiniti QX60 (2014) - page 75

    WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. ARS1133 ARS1041 Safety—Seats, seat belts and supplemental restraint system 1-55 ...

  • Infiniti QX60 (2014) - page 76

    ARS1042 ARS1043 ARS1044 1-56 Safety—Seats, seat belts and supplemental restraint system ...

  • Infiniti QX60 (2014) - page 77

    WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly re- strained in the rear seat, if possible. ● Even with the INFINITI Advanced Air Bag System, never install a rear-facing child restraint in the fr ...

  • Infiniti QX60 (2014) - page 78

    WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front s ...

  • Infiniti QX60 (2014) - page 79

    WARNING ● When sitting in the 2nd row rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured. Be especially care- ful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations. ● Do not use seat covers on the ...

  • Infiniti QX60 (2014) - page 80

    1. Roof-mounted curtain side-impact and rollover supplemental air bag inflators 2. Roof-mounted curtain side-impact and rollover supplemental air bags 3. Air bag Control Unit (ACU) 4 Pressure sensors in door (driver’s side shown; passenger side similar) 5. Supplemental front-impact air bag mod- ules 6. Crash zone sensor 7. Occupant classification ...

  • Infiniti QX60 (2014) - page 81

    INFINITI Advanced Air Bag System (front seats) WARNING T o ensure proper operation of the passen- ger’s advanced air bag system, please ob- serve the following items. ● Do not allow a passenger in the rear seat to push or pull on the seatback pocket. ● Do not place heavy loads heavier than 2.2 lb (1 kg) on the seatback, head restraint/headres ...

  • Infiniti QX60 (2014) - page 82

    crash, depending on the crash severity and whether the front occupants are belted or un- belted. Additionally, the front passenger air bag may be automatically turned OFF under some conditions, depending on the weight detected on the passenger seat and how the seat belt is used. If the front passenger air bag is OFF , the passen- ger air bag status ...

  • Infiniti QX60 (2014) - page 83

    Status light The front passenger air bag status light is located near the radio controls. After the ignition switch is placed in the ⬙ ON ⬙ position, the front passenger air bag status light on the instrument panel illuminates for about 7 seconds and then turns off or remains illuminated depending on the front passenger seat occupied status. Th ...

  • Infiniti QX60 (2014) - page 84

    Using the passenger air bag status light, you can monitor when the front passenger air bag is au- tomatically turned OFF with the seat occupied. The light will not illuminate when the front pas- senger seat is unoccupied. If an adult occupant is in the seat but the passen- ger air bag status light is illuminated (indicating that the air bag is OFF) ...

  • Infiniti QX60 (2014) - page 85

    ● Do not make unauthorized changes to your vehicle’s electrical system, sus- pension system or front end structure. This could affect proper operation of the front air bag system. ● T ampering with the front air bag system may result in serious personal injury. T ampering includes changes to the steering wheel and the instrument panel assembl ...

  • Infiniti QX60 (2014) - page 86

    Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact and rollover supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails in all 3 rows. All of the information, cautions and warnings in this manual must ...

  • Infiniti QX60 (2014) - page 87

    WARNING ● Do not place any objects near the seat- back of the front seats. Also, do not place any objects (an umbrella, bag, etc .) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if a side air bag inflates. ● Right after inflation, several side air bag and curtain air bag syste ...

  • Infiniti QX60 (2014) - page 88

    The pretensioner system may activate with the supplemental air bag system in certain types of collisions. W orking with the seat belt retractor, the pretensioner helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occu- pants. The pretensioner is encased with the seat belt ret ...

  • Infiniti QX60 (2014) - page 89

    SUPPLEMENT AL AIR BAG W ARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits for the air bag systems, preten- sioners and all related wiring. When the ignition switch is placed in the ON position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. Th ...

  • Infiniti QX60 (2014) - page 90

    WARNING ● Once a front air bag, side air bag, or curtain air bag has inflated, the air bag module will not function again and must be replaced. Additionally, the acti- vated pretensioners must also be re- placed. The air bag module and preten- sioner should be replaced by an INFINITI retailer. The air bag module and pretensioner cannot be repaire ...

  • Infiniti QX60 (2014) - page 91

    MEMO Safety—Seats, seat belts and supplemental restraint system 1-71 ...

  • Infiniti QX60 (2014) - page 92

    2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 4 Speedometer and odometer . . ...................2 - 4 T achometer ....................................2 - 5 Engine coolant temperature gauge ...............2 - 5 Fuel gauge .................................... ...

  • Infiniti QX60 (2014) - page 93

    Storage ......................................... 2-43 Map pockets .................................. 2-43 Seatback pockets ............................. 2-44 Sunglasses holder ............................. 2-44 Cup holders .................................. 2-45 Glove box .................................... 2-46 Console box ...................... ...

  • Infiniti QX60 (2014) - page 94

    1. V ent (P . 4-46) 2. Headlight/fog light/turn signal switch (P . 2-30) 3. Instrument brightness control (P . 2-34) 4. Meters, gauges, warning/indicator lights and V ehicle Information Display (P . 2-4, 2-7, 2-14) 5. Driver supplemental air bag/Horn (P .1-53, P . 2-35) 6. Back -up Collision Intervention (BCI) system switch (if so equipped) (P .5-3 ...

  • Infiniti QX60 (2014) - page 95

    23. Ignition switch (P . 5-12) 24. Cruise control main/set switches (if so equipped) and Intelligent cruise control main/set switches (if so equipped) (P . 5-51, P .5-53) 25. Dynamic Driver Assistance switch (if so equipped) (P . 5-72) 26. Tilt steering wheel control (P . 3-27) 27. Bluetooth® Hands-Free Phone System (P . 4-109, 4-123) 28. Steering ...

  • Infiniti QX60 (2014) - page 96

    1. T achometer 2. W arning/indicator lights 3. V ehicle Information Display 4. Speedometer 5. Fuel gauge 6. Odometer/T win trip odometer 7. Engine coolant temperature gauge SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer 䊊 1 and the twin trip odometer 䊊 2 are displayed belo ...

  • Infiniti QX60 (2014) - page 97

    Changing the display: Pushing the TRIP RESET 䊊 3 switch on the right of the combination meter to change the display as follows: T rip → T rip → T rip Resetting the trip odometer: Pushing the TRIP RESET switch 䊊 3 for more than 1 second resets the currently displayed trip odometer to zero. Average fuel economy and distance to empty informati ...

  • Infiniti QX60 (2014) - page 98

    CAUTION If the gauge indicates coolant tempera- ture near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If the gauge is over the nor- mal range, stop the vehicle as soon as safely possible. If the engine is over- heated, continued operation of the vehicle may seriously damage the engine. See “If your vehicle o ...

  • Infiniti QX60 (2014) - page 99

    Anti-lock Braking System (ABS) warning light Seat belt warning light and chime Malfunction indicator light (MIL) or Brake warning light Supplemental air bag warning light Security indicator light Charge warning light Fog light indicator light Side light and headlight indicator light (green) Low tire pressure warning light Front passenger air bag st ...

  • Infiniti QX60 (2014) - page 100

    If an ABS malfunction occurs, the anti-lock func- tion is turned off. The brake system then operates normally , but without anti-lock assistance. See “Brake system” in the “Starting and driving” sec- tion. or Brake warning light This light functions for both the parking brake and the foot brake systems. Parking brake indicator When the igni ...

  • Infiniti QX60 (2014) - page 101

    The low tire pressure warning light warns of low tire pressure or indicates that the TPMS is not functioning properly. After the ignition switch is placed in the ON position, this light illuminates for about 1 second and turns off. Low tire pressure warning: If the vehicle is being driven with low tire pressure, the warning light will illuminate. A ...

  • Infiniti QX60 (2014) - page 102

    ● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may per- manently damage the tires and increase the likelihood of tire failure. Serious ve- hicle damage could occur and ...

  • Infiniti QX60 (2014) - page 103

    When the power steering warning light illumi- nates with the engine running, there will be no power assist for the steering but you will still have control of the vehicle. At this time, greater steer- ing effort is required to operate the steering wheel, especially in sharp turns and at low speeds. See “Power steering” in the “Starting and dr ...

  • Infiniti QX60 (2014) - page 104

    For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. High beam indicator light (blue) This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The hi ...

  • Infiniti QX60 (2014) - page 105

    The Malfunction Indicator Light may stop blinking and come on steady. Have the vehicle inspected by an INFINITI retailer. Y ou do not need to have your vehicle towed to an INFINITI retailer. CAUTION Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fue ...

  • Infiniti QX60 (2014) - page 106

    Make sure the ignition switch is placed in the L OCK position, and take the Intelligent Key with you when leaving the vehicle. Lane departure warning chime (if so equipped) When the Lane Departure W arning (LDW) or Lane Departure Prevention (LDP) system is on, the chime sounds if the vehicle is traveling close to either the left or the right of a t ...

  • Infiniti QX60 (2014) - page 107

    HOW T O USE THE VEHICLE INFORMA TION DISPLA Y The vehicle information display can be changed using the buttons and ENTER located on the steering wheel. 1. — to enter the V ehicle information menu items 2. — to navigate through the items in vehicle information ENTER — to change or select an item in the vehicle information display 3. — to go ...

  • Infiniti QX60 (2014) - page 108

    Driving Aids (if so equipped) T o change the status, warnings or turn on or off any of the systems/warnings displayed in the “Driving Aids” menu. Use the button to select and the ENTER button to change a menu item: ● Forward ● W arning (FCW) ● Assistance (DCA) ● Lane ● W arning (LDW) ● Assistance (LDP) ● Blind Spot ● W arning (B ...

  • Infiniti QX60 (2014) - page 109

    I-Key Door Lock When this item is turned on, the request switch on the door is activated. From the Vehicle Set- tings menu, select “I-K ey Door Unlock”. Use the ENTER button to activate this function. Selective-Unlock When this item is turned on, only the driver’s door is unlocked first after the door unlock operation. When the door handle re ...

  • Infiniti QX60 (2014) - page 110

    Driver Assistance (if so equipped) The driver assistance system can enabled/disabled to display in the vehicle infor- mation display when the ignition switch is placed in the ON position From the “Main Menu Selection” select “Driver Assistance” to display in the vehicle information display when the ignition is placed in the ON position. T r ...

  • Infiniti QX60 (2014) - page 111

    WARNING The tire replacement indicator is not a substitute for regular tire checks, includ- ing tire pressure checks. See “Changing Wheels and Tires” in “Maintenance & Do- It- Y ourself” section. Many factors includ- ing tire inflation, alignment, driving habits and road conditions affect tire wear and when tires should be replaced. Set ...

  • Infiniti QX60 (2014) - page 112

    Use the , , and the ENTER buttons to select and change the units of the vehicle infor- mation display. The units of the center display/navigation can be changed indepen- dently of the vehicle information display . For ve- hicles not equipped with Navigation see “Lan- guage / Units” and vehicles equipped with Navigation see, “Others settings? ...

  • Infiniti QX60 (2014) - page 113

    VEHICLE INFORMA TION DISPLA Y W ARNINGS AND INDICA T ORS 1. No Key Detected 2. K ey ID Incorrect 3. Shift to Park 4. Push ignition to OFF 5. K ey Battery Low 6. Engine start operation for Intelligent Key system 7. Release Parking brake 8. Low Fuel 9. Low Washer Fluid 10. Door Open 11. Liftgate Open 12. Timer Alert – Time for a driver break? LIC25 ...

  • Infiniti QX60 (2014) - page 114

    13. Low Outside T emperature 14. P ower will turn off to save the battery 15. CVT Error 16. Reminder: T urn OFF headlights 17. Low Oil Pressure 18. K ey Registration Complete 19. Tire Pressure Low - Add Air 20. TPMS Error 21. Parking Sensor Error 22. Remote Start (if so equipped) 23. Loose Fuel Cap 24. I-K ey System Error: See Owners Manual No Key ...

  • Infiniti QX60 (2014) - page 115

    Low Washer Fluid This warning illuminates when the windshield- washer fluid is at a low level. Add windshield- washer fluid as necessary. See “Windshield- washer fluid” in the “Maintenance and do-it- yourself” section of this manual. Door Open This warning illuminates when a door has been opened when the engine is running. Liftgate open Thi ...

  • Infiniti QX60 (2014) - page 116

    Push to start (if so equipped) This warning appears in the vehicle information display when the vehicle has been started using the remote start function. T o start the vehicle, apply the brake and place the ignition switch in the ON position. Loose Fuel Cap This warning appears when the fuel-filler cap is not tightened correctly after the vehicle h ...

  • Infiniti QX60 (2014) - page 117

    The indicator light will blink every three seconds once the security system is armed. If during the pre-armed phase one of the following occurs, the system will not arm: ● Any door is unlocked with the mechanical key ● A door is opened with the release button with the intelligent key on your person ● The doors are unlocked using the unlock bu ...

  • Infiniti QX60 (2014) - page 118

    FCC Notice: For USA: This device complies with part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired operation. NO TE: Changes or modifications not expressly ap- ...

  • Infiniti QX60 (2014) - page 119

    If the windshield wiper operation is interrupted by snow or ice, the wiper may stop moving to protect its motor. If this occurs, turn the wiper switch to the OFF position and remove the snow or ice that is on and around the wiper arms. In approximately 1 minute, turn the switch on again to operate the wiper. SWIT CH OPERA TION The windshield wiper ...

  • Infiniti QX60 (2014) - page 120

    RAIN-SENSING AUT O WIPER S Y STEM (if so equipped) The rain-sensing auto wiper system can auto- matically turn on the wipers and adjust the wiper speed depending on the rainfall and the vehicle speed by using the rain sensor located on the upper part of the windshield. T o set the rain-sensing auto wiper system, push the lever down to the AUT O pos ...

  • Infiniti QX60 (2014) - page 121

    WARNING In freezing temperatures the washer solu- tion may freeze on the window and ob- scure your vision. Warm the rear window with the defroster before you wash the rear window. CAUTION ● Do not operate the washer continuously for more than 30 seconds. ● Do not operate the washer if the reser- voir is empty. ● Do not fill the windshield-was ...

  • Infiniti QX60 (2014) - page 122

    T o defrost the rear window glass and outside mirrors: Start the engine and push the rear window de- froster switch. The rear window defroster indica- tor light on the display screen comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes. CAUTION When cleaning the ...

  • Infiniti QX60 (2014) - page 123

    HEADLIGHT CONTROL SWIT CH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on. CAUTION Use the headlights with the engine run- ning to avoid discharging the vehi ...

  • Infiniti QX60 (2014) - page 124

    NO TE: Autolight activation sensitivity and the time delay for autolight shutoff can be adjusted. See “V ehicle information display” in this section. T o turn on the autolight system: 1. T urn the headlight switch to the AUT O posi- tion 䊊 1 . 2. T urn the ignition switch to ON. 3. The autolight system automatically turns the headlights on an ...

  • Infiniti QX60 (2014) - page 125

    Headlight aiming control Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may di- rectly hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle. The light axis can be lowered with ...

  • Infiniti QX60 (2014) - page 126

    INSTRUMENT BRIGHTNESS CONTROL Push the “+” button 䊊 A to increase the bright- ness of instrument panel lights when driving at night. Push the “-” button 䊊 B to decrease the bright- ness of instrument panel lights when driving at night. TURN SIGNAL SWIT CH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When ...

  • Infiniti QX60 (2014) - page 127

    T o sound the horn, push near the horn icon of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. T am- pering with the supplemental front air bag system may result in serious personal injury. WARNING Do not use or allow occupants to use the seat heater if you or ...

  • Infiniti QX60 (2014) - page 128

    The front seats are warmed by built-in heaters. The switches are located on the center console and can be operated independently of each other. 1. Start the engine. 2. T urn the control knob 䊊 A to the right 䊊 1 and select the desired heat range. ● For high heat, turn the knob to the right 䊊 1 . ● For low heat, tun the know to the left ? ...

  • Infiniti QX60 (2014) - page 129

    ● When cleaning the seat, never use gasoline, benzine, thinner, or any simi- lar materials. ● If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked by an INFINITI retailer. The rear seats are warmed by built-in heaters. The switches are located on the rear of the front center console ...

  • Infiniti QX60 (2014) - page 130

    WARNING Do not use or allow occupants to use the climate controlled seats if you or the oc- cupants can not monitor seat tempera- tures or have an inability to feel pain in those body parts in contact with the seat. Use of the climate controlled seats by such people could result in serious injury. CAUTION ● The battery could run down if the cli- ...

  • Infiniti QX60 (2014) - page 131

    4. When the vehicle’s interior is warmed or cooled, or before you leave the vehicle, be sure to turn the control knob to the off (cen- ter) position. The indicator light 䊊 B on the control knob goes off with the switch in the off (center) position. T o check the air filter for the climate controlled seat, contact an INFINITI retailer. The heate ...

  • Infiniti QX60 (2014) - page 132

    The warning systems switch is used to turn on and off the warning systems (Forward Collision W arning (FCW) , Lane Departure W arning (LDW) and Blind Spot Warning (BSW) systems) that are activated using the settings menu on the vehicle information display (VID) . When the warning systems switch is turned off, the indicator 䊊 1 on the switch is of ...

  • Infiniti QX60 (2014) - page 133

    T o use the outlets for devices that require 120v power, place the ignition in the ON position and push the power inverter switch. The switch will illuminate when enabled. CAUTION ● Use power outlets with the engine run- ning to avoid discharging the vehicle battery. ● Do not attempt to use this while driving. ● Do not use double adapters or ...

  • Infiniti QX60 (2014) - page 134

    CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for use with a cigarette lighter unit. Do not use any other power outlet for an accessory lighter. See your INFINITI re- tailer for additional information. ● Do not use with accessories that exceed a 12 volt, 120W (10A) power dr ...

  • Infiniti QX60 (2014) - page 135

    120V OUTLET (if so equipped) CAUTION ● The outlet and plug may be hot during or immediately after use. ● Use power outlets with the engine run- ning to avoid discharging the vehicle battery. ● Do not use accessories that exceed a 120V , 150W power draw. Do not use double adaptors or more than one elec- trical accessory. ● Avoid using power ...

  • Infiniti QX60 (2014) - page 136

    SEA TBACK POCKETS There are two seatback pockets located on the back of the driver and passenger seats. The pockets can be used to store maps. SUNGLASSES HOLDER T o open the sunglasses holder, push and release 䊊 1 . Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to prevent an accident. CAU ...

  • Infiniti QX60 (2014) - page 137

    CUP HOLDERS CAUTION Do not recline the rear seatback when you use the cup holders on the rear armrest. Doing so may cause the beverages to spill over, and if they are hot, they may scald the passengers. CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald y ...

  • Infiniti QX60 (2014) - page 138

    CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. GL OVE BOX Open the glove box by pulling the handle. Use the master key when locking 䊊 1 or unlocking 䊊 2 the glove box. WA ...

  • Infiniti QX60 (2014) - page 139

    CONSOLE BOX Upper half Pull up on the driver’s side latch to open the upper half of the console box. The upper half of the console box may be used for storage of cellular phones. An access hole is provided at the front of the upper half of the console box for a phone or iPod® cord routing to the power outlet. Lower half Pull up on the passenger? ...

  • Infiniti QX60 (2014) - page 140

    LUGGAGE HOOKS When securing items using luggage hooks lo- cated on the back of the seat or side finisher do not apply a load over more than 6.5 lbs (29 N) to a single hook. The luggage hooks that are located on the floor should have loads less then 110 lbs (490 N) to a single hook. The luggage hooks can be used to secure cargo with ropes or other t ...

  • Infiniti QX60 (2014) - page 141

    ROOF RACK (if so equipped) Genuine NISSAN accessory cross bars are avail- able through your INFINITI retailer. Contact an INFINITI retailer for crossbar or other equipment information. Always distribute the luggage evenly on the cross bars (if so equipped) . Do not load more than 150 lb (68 kg) on the cross bars (if so equipped) . Observe the maxim ...

  • Infiniti QX60 (2014) - page 142

    POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become ...

  • Infiniti QX60 (2014) - page 143

    Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window . T o open the window partially , push the switch down lightly until the desired window position is reached. T o close the window partially, pull the switch up until the desired window position is reached. Rear power window s ...

  • Infiniti QX60 (2014) - page 144

    Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs. WARNING There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc ., inside the vehi ...

  • Infiniti QX60 (2014) - page 145

    If the moonroof does not operate properly after performing the procedure above, have your ve- hicle checked by an INFINITI retailer. Auto-reverse function (when closing or tilting down the moonroof) The auto-reverse function can be activated when the moonroof is closed or tilted down by auto- matic operation when the ignition switch is placed in th ...

  • Infiniti QX60 (2014) - page 146

    P ANORAMIC SUNSHADE (if so equipped) The panoramic sunshade operates when the ig- nition switch is in the ON position. The sunshade switch is located near the roof console. When opening or closing the sunshade the switch need not be held. T o open the sunshade: ● T o fully open the sunshade, push the switch 䊊 1 toward the open position. T o clo ...

  • Infiniti QX60 (2014) - page 147

    When the ON switch 䊊 1 is pressed, the footwell lights, step lights, map lights and rear personal lights will automatically turn on and stay on for a period of time when: ● The doors are unlocked by the Intelligent K ey, a key or the request switch while all doors are closed and the ignition switch is in the OFF position. ● The driver’s doo ...

  • Infiniti QX60 (2014) - page 148

    T o turn on the personal lights, press and release the switch 䊊 1 . T o turn the personal lights off, press and release the switch 䊊 1 . T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. ...

  • Infiniti QX60 (2014) - page 149

    CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. The HomeLink® Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink® Universal T ransceiver: ● Will operate most Radio Fre ...

  • Infiniti QX60 (2014) - page 150

    PROGRAMMING HOMELINK® If you have any questions or are having difficulty programming your HomeLink® buttons, refer to the HomeLink® web site at: www .homelink.com or call 1-800-355-3515. NO TE: Place the ignition switch in the ACC posi- tion when programming HomeLink®. It is also recommended that a new battery be placed in the hand-held transmi ...

  • Infiniti QX60 (2014) - page 151

    Do not stand on your vehicle to perform the next steps. 4. At the receiver located on the garage door opener motor in the garage, locate the “learn” or “smart” button (the name and color of the button may vary by manufacturer but it is usually located near where the hanging antenna wire is attached to the unit) . If there is difficulty loca ...

  • Infiniti QX60 (2014) - page 152

    PROGRAMMING TROUBLE- DIAGNOSIS If the HomeLink® does not quickly learn the hand-held transmitter information: ● replace the hand-held transmitter batteries with new batteries. ● position the hand-held transmitter with its battery area facing away from the HomeLink® surface. ● press and hold both the HomeLink® and hand-held transmitter butt ...

  • Infiniti QX60 (2014) - page 153

    FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired operation. NO TE: Changes or modifications not expressly ap- ...

  • Infiniti QX60 (2014) - page 154

    MEMO 2-62 Instruments and controls ...

  • Infiniti QX60 (2014) - page 155

    3 Pre-driving checks and adjustments K e y s .............................................3 - 2 INFINITI Intelligent Key ..........................3 - 2 INFINITI Vehicle Immobilizer System keys ..........3 - 4 Doors ............................................3 - 4 Locking with key ................................3 - 5 Locking with inside lock knob ...

  • Infiniti QX60 (2014) - page 156

    A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see an INFINITI retailer for duplicates by using the key number. INFINITI does not re- cord key numbers so it is very important to keep track of your key number plate. A key number is on ...

  • Infiniti QX60 (2014) - page 157

    ● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply against another object. ● Do not change or modify the Intelligent Key. ● Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, im- mediately wipe until it is completely dry. ● Do not place the Intelligent Key for an extended period in an area ...

  • Infiniti QX60 (2014) - page 158

    INFINITI VEHICLE IMMOBILIZER S Y STEM KEY S Y ou can only drive your vehicle using the master or valet keys which are registered to the INFINITI V ehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key head. The master key can be used for all the locks. The valet key cannot be used for the glove box lock ...

  • Infiniti QX60 (2014) - page 159

    L OCKING WITH KEY The power door lock system allows you to lock or unlock all doors at the same time. T urning the key toward the front 䊊 1 of the vehicle locks all doors. T urning the key one time toward the rear 䊊 2 of the vehicle unlocks that door. From that position, returning the key to neutral 䊊 3 (where the key can only be removed and ...

  • Infiniti QX60 (2014) - page 160

    L OCKING WITH POWER DOOR L OCK SWIT CH T o lock all the doors without a key, push the door lock switch (driver’s or front passenger’s side) to the lock position 䊊 1 . When locking the door this way , be certain not to leave the key inside the vehicle. T o unlock all the doors without a key , push the door lock switch (driver’s or front pass ...

  • Infiniti QX60 (2014) - page 161

    CHILD SAFETY REAR DOOR L OCK Child safety locks help prevent the rear doors from being opened accidentally , especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the LOCK position, the door can be opened only from the outside. WARNING ● Radio waves could ad ...

  • Infiniti QX60 (2014) - page 162

    In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. If the battery is dis- charged, replace it with a new one. When the Intelligent Key battery is low, an indi ...

  • Infiniti QX60 (2014) - page 163

    OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent K ey is within the specified operating range from the request switch 䊊 1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent K ey operating range becomes narrower, and the Intelligent K ...

  • Infiniti QX60 (2014) - page 164

    ● T o prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent Key with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. INFINITI INTELL ...

  • Infiniti QX60 (2014) - page 165

    NO TE: ● Request switches for all doors and lift- gate can be deactivated when the I-Key Door Lock setting is switched to OFF in the Vehicle Settings of the vehicle in- formation display. For additional infor- mation, see “V ehicle information dis- play” in the “Instruments and controls” section of this manual. ● Doors lock with the doo ...

  • Infiniti QX60 (2014) - page 166

    Unlocking doors 1. Carry the Intelligent Key . 2. Push the door handle request switch. 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch again within 1 minute to unlock all doors. For power liftgate opening: 1. Carry the Intelligent Key . 2. Press the power liftgate request switch. NO ...

  • Infiniti QX60 (2014) - page 167

    HOW T O USE THE REMO TE KEYLESS ENTR Y FUNCTION The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent Key . The remote keyless function can operate at a distance of 33 ft (10 m) away from the vehicle. The operating distance de- pends upon the conditions around the vehicle. The remote keyle ...

  • Infiniti QX60 (2014) - page 168

    Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 5 sec- onds to unlock all doors. NO TE: The unlocking operation can be changed in Selective door unlock in the V ehicle Set- tings of the vehicle information display. For additional information, see “V ehicle info ...

  • Infiniti QX60 (2014) - page 169

    Releasing the rear liftgate The rear liftgate can be opened and closed by performing the following: ● Press the button for longer than 0.5 seconds to open the rear liftgate. ● Press the button again for longer than 0.5 seconds to close the rear liftgate. When the button is pressed during the open or close process the liftgate will reverse. Usin ...

  • Infiniti QX60 (2014) - page 170

    Answer back horn feature If desired, the answer back horn feature can be deactivated using the Intelligent Key . When de- activated and the L OCK button is pushed the hazard indicator flashes twice and when the UNL OCK button is pushed, nei- ther the hazard indicator nor the horn operates. NO TE: If you change the answer back horn and light flash f ...

  • Infiniti QX60 (2014) - page 171

    TROUBLESHOO TING GUIDE V erify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible Cause Remedy When stopping the engine The Shift to Park warning appears on the display and the inside warni ...

  • Infiniti QX60 (2014) - page 172

    The button will be on the INFINITI Intelli- gent Key if the vehicle has remote engine start. This feature allows the engine to start from out- side the vehicle. The following features may be affected when the remote start feature is used: ● Vehicles with an automatic climate control system will default to either a heating or cooling mode dependin ...

  • Infiniti QX60 (2014) - page 173

    ● The engine will continue to run for 10 min- utes. Repeat the steps to extend the time for an additional 10 minutes. See “Extending engine run time” in this section. Depress the brake and place the ignition switch in the ON position before driving. For further instructions see “Driving the vehicle” in the “Starting and driving” secti ...

  • Infiniti QX60 (2014) - page 174

    䊊 1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly. 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. When closing the hood, lower it slowly and make sure it locks into place. WARNING ● Make sure the hood is comple ...

  • Infiniti QX60 (2014) - page 175

    OPERA TING THE POWER LIFT GA TE WARNING ● Make sure that all passengers have their hands, etc ., inside the vehicle be- fore closing the liftgate. ● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls. Unattended children could become involved in seri- ous accidents. Liftgate switch LPD206 ...

  • Infiniti QX60 (2014) - page 176

    NO TE: T o open, close or reverse the power liftgate, the shift lever must be in P (Park) . Also, the power liftgate will not operate if battery voltage is low. Power Open: The power liftgate automatically moves from the fully closed position to the fully open position in approximatel y5–8 seconds. The power open feature can be activated by the s ...

  • Infiniti QX60 (2014) - page 177

    Manual Mode: If power operation is not available, the liftgate may be operated manually. Power operation may not be available if the power liftgate main switch is in the ON position, if multiple obstacles have been detected in a single power cycle, or if battery voltage is low . If the power liftgate opener switch 䊊 A is pushed during power open ...

  • Infiniti QX60 (2014) - page 178

    P ower liftgate release If the liftgate cannot be opened with the instru- ment panel switch, liftgate opener switch or key- fob due to a discharged battery, follow these steps: 1. Remove the cover 䊊 A on the inside of the liftgate. 2. Move the lever 䊊 B as illustrated to open the liftgate. Contact an INFINITI retailer as soon as possible for re ...

  • Infiniti QX60 (2014) - page 179

    T o lock, close the fuel-filler door securely and lock the doors. FUEL -FILLER CAP WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueli ...

  • Infiniti QX60 (2014) - page 180

    T o remove the fuel-filler cap: 1. T urn the fuel-filler cap counterclockwise to remove. 2. Put the fuel-filler cap on the cap holder 䊊 1 while refueling. T o install the fuel-filler cap: 1. Insert the fuel-filler cap straight into the fuel- filler tube. 2. T urn the fuel-filler cap clockwise until a single click is heard. Loose Fuel Cap warning ...

  • Infiniti QX60 (2014) - page 181

    WARNING ● Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. ● Do not adjust the steering wheel any closer to you than is necessary for proper steering operation and comfort. The driver’s air bag inflates with great force. If you are unrestrained, leaning forward, sitting sideways or ...

  • Infiniti QX60 (2014) - page 182

    Entry/Exit function The automatic drive positioner system will make the steering wheel move up automatically when the driver’s door is opened and the ignition switch is in the LOCK position. This lets the driver get into and out of the seat more easily. The steering wheel moves back into position when the driver’s door is closed and the ignitio ...

  • Infiniti QX60 (2014) - page 183

    V ANITY MIRRORS T o access the vanity mirror, pull the sun visor down and flip open the mirror cover. The vanity mirror will illuminate when the mirror cover is open. AUT OMA TIC ANTI-GLARE REARVIEW MIRROR The inside mirror is designed so that it automati- cally dims according to the intensity of the head- lights of the vehicle following you. The a ...

  • Infiniti QX60 (2014) - page 184

    OUTSIDE MIRRORS The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 . WARNING ● Objects viewed in the outside mirror on the passenger side are closer than th ...

  • Infiniti QX60 (2014) - page 185

    the pivot point. T o correct electronic mirror op- eration, cycle the mirrors by pushing the “CL OSE” switch until completely closed, then push the “OPEN” switch until the mirrors are in the open position. Reverse tilt-down feature (if so equipped) The reverse tilt-down feature will turn the se- lected outside mirror surface downward to pro ...

  • Infiniti QX60 (2014) - page 186

    MEMOR Y ST ORAGE FUNCTION T wo positions for the driver’s seat, steering col- umn, and outside mirrors can be stored in the automatic drive positioner memory . Follow these procedures to use the memory system. 1. Set the Continuously V ariable T ransmission (CVT) shift lever to the P (Park) position. 2. Place the ignition in the ON position. 3. A ...

  • Infiniti QX60 (2014) - page 187

    The selected mirror surface will return to its origi- nal position when any of the following have oc- curred: ● The shift lever is moved to any position other than R (Reverse) . ● The outside mirror control switch is set to the neutral or center position. ● The ignition switch is placed in the OFF position. NO TE: If the outside mirror contro ...

  • Infiniti QX60 (2014) - page 188

    Selecting the memorized position Set the shift lever to the P (Park) position, then: ● Within 45 seconds of opening the driver’s door, push the memory switch (1 or 2) or ● Place the ignition switch in the ON position and push the memory switch (1 or 2) . The driver’s seat, steering column, and outside mirrors will move to the memorized posi ...

  • Infiniti QX60 (2014) - page 189

    For further instructions on using the Climate con- trol system see “Heater and air conditioner (au- tomatic)” in “Monitor, climate, audio, phone and voice recognition systems” . For further instructions on using the Navigation System, see the separate Navigation System Owner’s Manual. For further instructions on using the Audio sys- tem, ...

  • Infiniti QX60 (2014) - page 190

    MEMO 3-36 Pre-driving checks and adjustments ...

  • Infiniti QX60 (2014) - page 191

    4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen without Navigation System (if so equipped) ..................4 - 4 How to use the INFINITI controller ................4 - 5 How to select menus on the screen ..............4 - 6 How to use the ST A TUS button ..................4 - 6 How to use the ...

  • Infiniti QX60 (2014) - page 192

    Radio ........................................ 4-54 FM radio reception . . .......................... 4-54 AM radio reception . . .......................... 4-54 Satellite radio reception (if so equipped) ......... 4-55 Audio operation precautions .................... 4-55 FM/AM/SA T radio with compact disc (CD) player (if so equipped) ............ ...

  • Infiniti QX60 (2014) - page 193

    Call volume . ................................. 4-133 INFINITI Voice Recognition System (if so equipped) ................................. 4-134 INFINITI Voice Recognition Standard Mode ...... 4-134 Using the system ............................. 4-137 Before starting ............................... 4-137 Giving voice commands ...................... ...

  • Infiniti QX60 (2014) - page 194

    WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice a ...

  • Infiniti QX60 (2014) - page 195

    9. ENTER button 10. SETTING button (P . 4-8) 11. ECON (fuel economy) button CAUTION ● The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. ● T o clean the display, never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or ...

  • Infiniti QX60 (2014) - page 196

    HOW T O SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details: 1. Header: Shows the path used to get to the current screen (for example, pres ...

  • Infiniti QX60 (2014) - page 197

    Menu Item Result Fuel Economy Displays Fuel Economy menu. Distance to Empty Displays an estimation of the distance that the vehicle can be driven before refueling. The D TE is constantly calculated based on the amount of fuel in the fuel tank and actual fuel consumption. The display is updated every 30 seconds. When the fuel level is low, the DTE d ...

  • Infiniti QX60 (2014) - page 198

    HOW T O USE THE SETTING BUTT ON Press the SETTING button. This screen displays and adjusts various settings and functions that are available for your vehicle. Use the INFINITI controller to select an item and then press the ENTER button. When the amber indicator next to an item is illuminated, the feature is enabled. Menu Item Result Audio See “ ...

  • Infiniti QX60 (2014) - page 199

    Comfort settings Item Result Comfort Select the “Comfort” key by using the INFINITI controller. The comfort option screen will be displayed. The items below will be available to adjust. Y ou can set the following operating conditions by highlighting the desired item using the INFINITI controller. The amber indicator (box at the right o f the se ...

  • Infiniti QX60 (2014) - page 200

    Language/Units Use the INFINITI controller to select the “Language/Units” key. Item Result Language/Units Select which settings you want to change using the INFINITI controller. Select Language Select the “English” key, the “Français” key or the “Español” key to change the language shown on the display. Select Units Select the “ ...

  • Infiniti QX60 (2014) - page 201

    1. CAMERA button 2. DEST button* 3. INFINITI controller (P . 4-12) 4. INFO button (P . 4-16) 5. SETTING button (P . 4-18) 6. OFF brightness control button 7. ST A TUS button (P . 4-15) 8. VOICE button* 9. ENTER button 10. BACK (previous) button 11. MAP button* 12. ROUTE button* *For Navigation system control buttons, refer to the separate Navigatio ...

  • Infiniti QX60 (2014) - page 202

    HOW T O USE THE INFINITI CONTROLLER Choose an item on the display by rotating or pushing the center dial 䊊 2 upward or downward. Press the ENTER button 䊊 1 to select an item. If you press either of the BACK buttons 䊊 3 before the operation is completed, the operation will be canceled and/or the display will return to the previous screen. Afte ...

  • Infiniti QX60 (2014) - page 203

    T ouch screen operation With this system, the same operations as those for the INFINITI controller are possible using the touch screen operation. Selecting the item: T ouch an item to select. T o select the “Naviga- tion” key, touch the “Navigation” key 䊊 1 on the screen. T ouch the “BACK” key 䊊 2 to return to the previous screen. A ...

  • Infiniti QX60 (2014) - page 204

    ● Delete: Deletes the last inputted character with one touch. T ouch and hold the “Delete” key to delete all of the characters. ● OK: Completes the character input. T ouch screen maintenance If you clean the display screen, use a dry , soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth ...

  • Infiniti QX60 (2014) - page 205

    HOW T O SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. 1. Header: Shows the path used to get to the current screen (for example, pres ...

  • Infiniti QX60 (2014) - page 206

    HOW T O USE THE INFO BUTT ON Press the INFO button. This screen sets or dis- plays various information that is helpful for using the vehicle. Available items include fuel economy, maintenance, navigation and voice recognition information. Menu Item Result Infiniti Connection For information on the Infiniti Connection system, see the separate Naviga ...

  • Infiniti QX60 (2014) - page 207

    Menu Item Result Maintenance Items Displays maintenance reminders. Reminder keys Select a key to display the maintenance interval for engine oil, oil filter, tire or other reminder. Reset Distance Resets the distance for the selected reminder to 0 mi (km) . Interval Displays the interval for the selected reminder. Select the “+” or “-” keys ...

  • Infiniti QX60 (2014) - page 208

    HOW T O USE THE SETTING BUTT ON Press the SETTING button. This screen displays and adjusts various settings and functions that are available for your vehicle. When the amber indicator next to an item is illuminated, the feature is enabled. Menu Item Result Navigation See the separate Navigation System Owner’s Manual for more information. Audio Se ...

  • Infiniti QX60 (2014) - page 209

    Menu Item Result Rear display settings T o control the rear display settings, select the “Display Control” key. Select the “ON” key for either the left or right display to alternately enable or disable the display fo the left or right rear passengers. If the display is enabled, select the key (DVD, USB, front AUX or rear AUX) that you wish ...

  • Infiniti QX60 (2014) - page 210

    Comfort Settings Item Result Comfort Select the “Comfort” key by using the INFINITI controller. The comfort option screen will be displayed. The items below will be available to adjust. Y ou can set the following operating conditions by highlighting the desired item using the INFINITI controller. The amber indicator (box at the right o f the se ...

  • Infiniti QX60 (2014) - page 211

    Language/Units Use the INFINITI controller to select the “Language/Units” key. Item Result Language/Units Select which settings you want to change using the INFINITI controller. Select Language Select the “English” key, the “Français” key or the “Español” key to change the language shown on the display. Select Units Select the “ ...

  • Infiniti QX60 (2014) - page 212

    USING THE IMAGE VIEWER When a compatible portable storage device is plugged into the USB jack located in the center console, compatible image files stored on the device can be viewed on the control panel de- vice. Connecting the portable storage device T o connect a portable storage device to the sys- tem so that images stored on it can be viewed, ...

  • Infiniti QX60 (2014) - page 213

    Viewing images in a slideshow T o view all of the images on the device in a slideshow , first enter the full screen mode while viewing one of the images. The slideshow control buttons are located on the right side of the screen. Select the play key to begin the slideshow. The images shown on the screen will periodically change at a given interval o ...

  • Infiniti QX60 (2014) - page 214

    When the shift lever is shifted into the R (Re- verse) position, the monitor display shows a rear- ward view from the vehicle. WARNING ● The system is designed as an aid to the driver in situations such as slot parking or parallel parking. ● The RearView Monitor is a convenience but not a substitute for proper backing procedures. Always turn to ...

  • Infiniti QX60 (2014) - page 215

    V ehicle width guide lines 䊊 5 : Indicate the vehicle width when backing up. Predicted course lines 䊊 6 : Indicate the predicted course when backing up. The predicted course lines will be displayed on the monitor when the shift selector is in the R (Reverse) position and the steering wheel is turned. The predicted course lines will move de- pen ...

  • Infiniti QX60 (2014) - page 216

    3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C . 4. When the back of the vehicle enters the parking space 䊊 C , maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking spaces 䊊 C . 5. When the vehicle is parked in the space ...

  • Infiniti QX60 (2014) - page 217

    Backing up on a steep uphill When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place 䊊 B . Note that any object on the hill is further ...

  • Infiniti QX60 (2014) - page 218

    Backing up near a projecting object The predicted course lines 䊊 A do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual backing up course. Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display. However, the position 䊊 C is actual ...

  • Infiniti QX60 (2014) - page 219

    ● When the shift lever is shifted to the R (Re- verse) position, the display screen automati- cally changes to the RearView Monitor mode. However, the radio can be heard. ● When the view is switched, the display im- ages on the screen may be displayed in some delay. ● When the temperature is extremely high or low , the screen may not clearly ...

  • Infiniti QX60 (2014) - page 220

    There are some areas where the system will not show objects and the system does not warn of moving objects. When in the front or rearview display , an object below the bumper or on the ground may not be viewed 䊊 1 . When in the bird’s-eye view , a tall object near the seam 䊊 3 of the camera viewing areas will not appear in the monitor 䊊 2 . ...

  • Infiniti QX60 (2014) - page 221

    ● The distance between objects viewed in the rearview differs from the actual dis- tance since because of a wide-angle lens is used. ● Use the displayed lines and the bird’s- eye view as a reference. The lines and the bird’s-eye view are greatly affected by the number of occupants, fuel level, vehicle position, road condition and road grade ...

  • Infiniti QX60 (2014) - page 222

    V ehicle width guide lines 䊊 5 : Indicate the vehicle width when backing up. Predictive course lines 䊊 6 : Indicate the predictive course when operating the vehicle. The predictive course lines will be displayed on the monitor when the steering wheel is turned. The predictive course lines will move depending on how much the steering wheel is tu ...

  • Infiniti QX60 (2014) - page 223

    displayed. It will be shown only the first time after the ignition switch is placed in the ON position. When the corner of the vehicle moves closer to an object, the corner sonar indicators 䊊 3 appear. When the center of the vehicle moves close to an object, the center sonar indicator 䊊 4 appears (if so equipped) . The driver can check the dire ...

  • Infiniti QX60 (2014) - page 224

    The corner sonar indicator 䊊 4 can be turned off. See “Around View Monitor settings” in this sec- tion. CAUTION The turn signal light may look like the side-of-vehicle line. This is not a malfunction. Front-wide and rear-wide view The front-wide and rear-wide view shows a wider area on the entire screen and allows the checking of the blind co ...

  • Infiniti QX60 (2014) - page 225

    DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DIST ANCES Backing up on a steep uphill When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place ...

  • Infiniti QX60 (2014) - page 226

    Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place 䊊 B . Note that any object on the hill is clos ...

  • Infiniti QX60 (2014) - page 227

    Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display. However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. HOW T O SWIT CH THE DISP ...

  • Infiniti QX60 (2014) - page 228

    If the shift lever is not in the R (Reverse) position, the available views are: ● Front-view/bird’s-eye view split screen ● Front-view/front-side view split screen ● Front-wide view If the shift lever is in the R (Reverse) position, the available views are: ● Rearview/bird’s-eye view split screen ● Rearview/front-side view split scree ...

  • Infiniti QX60 (2014) - page 229

    ● The system may not detect the follow- ing objects: – Fluffy objects such as snow, cloth, cotton, glass or wool. – Thin objects such as rope, wire or chain. – Wedge-shaped objects. ● If your vehicle sustains damage to the bumper fascia, leaving it misaligned or bent, the sensing zone may be altered causing inaccurate measurement of ob- j ...

  • Infiniti QX60 (2014) - page 230

    ● When vehicle speed decreases below ap- proximately 6 mph (10 km/h). ● When the ignition switch is placed in the OFF position and turned back to the ON position again. T o prevent the sonar system from activating alto- gether, use the “Camera Settings” menu. For more information, see “ Around View® Monitor settings” in this section. M ...

  • Infiniti QX60 (2014) - page 231

    When the MOD system detects moving objects surrounding the vehicle, the yellow frame will be displayed on the view where the objects are detected and a chime will sound once. While the MOD system continues to detect moving ob- jects, the yellow frame continues to be displayed. In the bird’s-eye view , the yellow frame 䊊 1 is displayed on each c ...

  • Infiniti QX60 (2014) - page 232

    T o set the MOD system so that it remains off at all times, use the camera settings menu. See “ Around View Monitor settings” in this section for more information. WARNING ● Do not use the MOD system when tow- ing a trailer. The system may not func- tion properly. ● Excessive noise (for example, audio system volume or open vehicle window) w ...

  • Infiniti QX60 (2014) - page 233

    AROUND VIEW MONIT OR SETTINGS T o set up the Around View Monitor to your pre- ferred settings, press the SETTING button, se- lect the “Camera” key and press the ENTER button. Predictive Course Lines: When this item is turned to ON, the predictive course lines are displayed in the front view, rear- view and bird’s-eye view . Camera View Priori ...

  • Infiniti QX60 (2014) - page 234

    Sonar: When this item is turned ON, the front and rear sonar is activated 䊊 1 . When this item is turned to OFF (indicator turns off) , the front and rear sonar is deactivated. The amber markers 䊊 2 are dis- played at the corners of the vehicle icon and the parking sensor icon will disappear on the key 䊊 3 . When the MOD is turned OFF on the ...

  • Infiniti QX60 (2014) - page 235

    When the “[X]” icon is displayed on the screen, the camera image may be receiving temporary electronic disturbances from surrounding de- vices. This will not hinder normal driving opera- tion but the system should be inspected by an INFINITI retailer if it occurs frequently . OPERA TING TIPS CAUTION ● Do not use alcohol, benzine or thinner to ...

  • Infiniti QX60 (2014) - page 236

    Adjust air flow direction for the center vents 䊊 1 , driver’s and passenger’s side vents 䊊 2 , and rear vents 䊊 3 by moving the vent slide and/or vent assemblies. Open or close the vents using the dial. Move the dial toward the to open the vents or toward the to close them. The vents underneath the second row seats 䊊 4 are operational w ...

  • Infiniti QX60 (2014) - page 237

    1. (front defroster) button 2. (rear window defroster) button 3. OFF button 4. Fan speed decrease button 5. Fan speed increase button 6. AUT O climate control ON button 7. REAR button 8. Air recirculation button 9. CLIMA TE button 10. T emperature control (increase) button (driver’s side) 11. T emperature control (decrease) button (driver’s sid ...

  • Infiniti QX60 (2014) - page 238

    Start the engine and operate the controls to activate the air conditioner. ● Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vents. ● When parking, set the heater and air condi- tioner controls to turn off air recirculation to allow fresh air into the passe ...

  • Infiniti QX60 (2014) - page 239

    Air recirculation Press the air recirculation button to recir- culate interior air inside the vehicle. The indicator light on the button will come on. The air recirculation cannot be activated when the air conditioner is in the front defrosting mode or the front defrosting and foot out- let mode. Automatic intake air control In the AUT O mode, the ...

  • Infiniti QX60 (2014) - page 240

    CLIMA TE SETTING SCREEN Climate control settings can be changed on the screen. Press the CLIMA TE button on the instrument panel and turn the display to the Climate mode. Heating (A/C off) The air conditioner does not activate in this mode. When you need to heat only , use this mode. 1. Press the CLIMA TE button. 2. If the “ A/C” indicator on t ...

  • Infiniti QX60 (2014) - page 241

    Ion control: This unit generates highly concentrated Plasma- cluster™ ions into the air blown from the vents and reduces odor absorbed into the interior trim. When the air conditioner is turned on, the system generates Plasmacluster™ ions automatically . The amount of Plasmacluster™ ions increases according to the amount of air flow. When the ...

  • Infiniti QX60 (2014) - page 242

    Rear automatic air conditioning system T o control the rear automatic air conditioning system with the front air conditioner control panel, press the REAR button. When the rear automatic air conditioning system control is on, the indicator light on the REAR button will illumi- nate and the front display will switch to the rear air conditioner scree ...

  • Infiniti QX60 (2014) - page 243

    1. OFF button 2. Fan speed increase (+) button 3. AUT O button 4. T emperature increase ( ) button 5. T emperature decrease ( ) button 6. Display 7. Fan speed decrease (-) button Rear control buttons: The rear seat passengers can adjust the rear automatic air conditioning system using the con- trol switches at the rear of the center console. The re ...

  • Infiniti QX60 (2014) - page 244

    RADIO Place the ignition switch in the ACC or ON position and press the VOL (volume)/ON·OFF (power) knob to turn the radio on. If you listen to the radio with the engine not running, the ignition switch should be placed in the ACC position. Radio reception is affected by station signal strength, distance from radio transmitter, build- ings, bridge ...

  • Infiniti QX60 (2014) - page 245

    SA TELLITE RADIO RECEPTION (if so equipped) When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly. This is not a mal- function. W ait more than 10 minutes with satellite radio ON and the vehicle outside of any metal or large building for satellite radio to receive all of the ...

  • Infiniti QX60 (2014) - page 246

    ● The CD player sometimes cannot func- tion when the compartment tempera- ture is extremely high or low. Decrease/increase the temperature before use. ● Do not expose the CD to direct sun- light. ● CDs that are in poor condition or are dirty, scratched or covered with finger- prints may not work properly. ● The following CDs may not work pr ...

  • Infiniti QX60 (2014) - page 247

    ● The following CDs/DVDs are not guar- anteed to play: ● Copy control compact disc s (CCCD) ● Recordable compact disc s (CD-R) ● Rewritable compact disc s (CD-RW) ● Recordable compact disc s (DVD±R, DVD±R DL) ● Rewritable compact disc s (DVD±RW, DVD±RW DL) ● Do not use the following CDs/DVDs as they may cause the CD/DVD player to ...

  • Infiniti QX60 (2014) - page 248

    Copyright and trademark ● The technology protected by the U.S. patent and other intellectual property rights owned by Macrovision Corporation and other right holders is adopted for this system. ● This copyright protected technology cannot be used without a permit from Macrovision Corporation. It is limited to personal use, etc ., as long as the ...

  • Infiniti QX60 (2014) - page 249

    ● Partitioned USB devices may not play cor- rectly . ● Some characters used in other languages (Chinese, Japanese, etc.) may not appear properly in the display. Using English lan- guage characters with a USB device is rec- ommended. General notes for USB use: Refer to your device manufacturer’s owner infor- mation regarding the proper use and ...

  • Infiniti QX60 (2014) - page 250

    CD or USB with Compressed Audio Files (models without Navigation System) The file types supported by this system are MP3 and WMA . Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well-known compressed digital audio file format. This format allows for near “CD quality” sound, but at ...

  • Infiniti QX60 (2014) - page 251

    Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display. ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software. ...

  • Infiniti QX60 (2014) - page 252

    Specification chart : Supported media CD, CD-R, CD-RW, USB 2.0 Supported file systems CD, CD-R, CD-RW, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista® operating system-based computer) are not supported. UDF Bridge (UDF 1.02 + ...

  • Infiniti QX60 (2014) - page 253

    T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/USB device was inserted correctly. Check if the CD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player ...

  • Infiniti QX60 (2014) - page 254

    CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD qual ...

  • Infiniti QX60 (2014) - page 255

    Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed. ● The playback order is the order in which th ...

  • Infiniti QX60 (2014) - page 256

    Specification chart : Supported media CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista® o ...

  • Infiniti QX60 (2014) - page 257

    T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly. Check if the CD/DVD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, th ...

  • Infiniti QX60 (2014) - page 258

    Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX® codec owned by Div, Inc. used for a lossy compres- sion of video based on MPEG-4. ● AVI – A VI stands for Audio Video Interleave. It is standard file format originated by Micro- soft Corporation. A .divx encoded file can be saved ...

  • Infiniti QX60 (2014) - page 259

    Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW, DVD, DVD±R, DVD±RW, DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0 * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the L ...

  • Infiniti QX60 (2014) - page 260

    1. VOL/ON·OFF control knob 2. SEEK/CA T/TRACK button (back) 3. SEEK/CA T/TRACK button (for- ward) 4. FM·AM button 5. XM button* 6. DISC·AUX button 7. RDM/RPT button 8. SCAN button 9. CD eject button 10. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade and Balance) 11. Station select (1 - 6) buttons *No satellite radio reception is availab ...

  • Infiniti QX60 (2014) - page 261

    VOL/ON·OFF control: Place the ignition switch in the ACC or ON position and press the VOL/ON·OFF control knob while the system is off to call up the mode that was playing immediately before the system was turned off. T o turn the system off, press the VOL/ON·OFF control knob. T urn the VOL/ON·OFF control knob to adjust the volume. Models withou ...

  • Infiniti QX60 (2014) - page 262

    Audio settings: Press the SETTING button and select the “ Au- dio” key to adjust the following audio settings. Bass/T reble/Balance/Fade: T o adjust the speaker tone quality and sound balance, select the “Bass”, “T reble”, “Balance” or “Fade” key and adjust it with the INFINITI control- ler. Fade adjusts the sound level between ...

  • Infiniti QX60 (2014) - page 263

    iP od®/USB → CD → iPod®/USB ● Models with Navigation System iP od®/USB → CD/DVD → Bluetooth® Audio → iP od®/USB Linking Intelligent Key (models with Navi- gation System) : The audio settings can be memorized for each Intelligent Key . For more details, see “Setting memory function” in the “Predriving checks and adjustments” ...

  • Infiniti QX60 (2014) - page 264

    SCAN tuning: Press the SCAN button to stop at each broad- casting station for 5 seconds. Pressing the SCAN button again during this five second pe- riod will stop scan tuning and the radio will remain tuned to that station. If the SCAN button is not pressed within 5 seconds, scan tuning moves to the next station. 1 to 6 Station memory operations: S ...

  • Infiniti QX60 (2014) - page 265

    ● Favorite Artist & Songs – T ags the current artist or song playing on SiriusXM Satellite Radio as a favorite. – T urn the Alert ON to indicate whenever a favorite artist or song is playing on Siri- usXM Satellite Radio. The audio system must be playing Sirius XM Satellite Radio for this feature to work. – Delete a favorite artist or s ...

  • Infiniti QX60 (2014) - page 266

    TUNE/FOLDER knob While playing a CD with compressed audio files, turn the TUNE/FOLDER knob right or left to play the next or previous folder. T ext (models without Navigation System) : Select the “T ext” key using the INFINITI controller and then press the ENTER button while the CD is being played to display the music information below . CD: ? ...

  • Infiniti QX60 (2014) - page 267

    Front AUX (auxiliary) input jacks (inside center console) The front auxiliary input jacks are located inside the center console 䊊 1 . NTSC compatible de- vices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the sys- tem thr ...

  • Infiniti QX60 (2014) - page 268

    Rear AUX (auxiliary) input jacks (on back of center console) The rear auxiliary input jacks are located on the back of the center console. NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the sys- tem th ...

  • Infiniti QX60 (2014) - page 269

    Additional features For more information about the iPod® player available with this system, see “iP od® player operation” in this section. For more information about the USB interface available with this system, see “USB interface” in this section. For more information about the Bluetooth® streaming audio feature available with this sys- ...

  • Infiniti QX60 (2014) - page 270

    Playing a DVD DISC-AUX button Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images. Press the DISC-AUX button until the DVD mode is active on the display. When a DVD is loaded, it will be replayed auto- matically . The operation screen will be turned on when the DISC-AUX button is press ...

  • Infiniti QX60 (2014) - page 271

    – Select the directional keys to move the cursor on the DVD menu. – Select the “Enter” key to fix the selected menu item. – Select the “Move” key to move the loca- tion of the operation keys on the screen. – Select the “Back” key to return to the previous menu screen. – Select the “Hide” key to hide the opera- tion keys. ? ...

  • Infiniti QX60 (2014) - page 272

    ● Menu Skip (DVD-VIDEO) DVD menus are automatically configured and the contents will be played directly when the “Menu Skip” key is turned on. Note that some discs may not be played directly even if this item is turned on. ● CM Skip (DVD-VIDEO) Select the “CM Skip” key to choose the setting time for CM backward and forward operations. U ...

  • Infiniti QX60 (2014) - page 273

    CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port. This could damage the port and the cove ...

  • Infiniti QX60 (2014) - page 274

    SEEK•CA T/TRACK button: Press the SEEK•CA T/TRACK button while an audio file on the USB device is playing to return to the beginning of the current track. Press the SEEK•CA T/TRACK button several times to skip backward several tracks. Press the SEEK•CA T/TRACK button while an audio file on the USB device is playing to advance one track. Pre ...

  • Infiniti QX60 (2014) - page 275

    ● Folder List/T rack List Displays the folder or track list. The “Movie Playback” key is also displayed in this list screen and enables you to switch to the movie playback mode. ● Play Mode Choose the preferred play mode using the INFINITI controller or the touchscreen. Movie file operation (models with Navigation System) Park the vehicle i ...

  • Infiniti QX60 (2014) - page 276

    ● Previous Chapter/Rewind: Select the key to skip the chapter(s) of the disc backward. The chapters will go back the number of times the key is selected. Press and hold the key to rewind the chap- ter. List : Select the “List” key on the movie file operation screen to display the file list. Settings: Select the “Settings” key to adjust th ...

  • Infiniti QX60 (2014) - page 277

    iP od®* PLA YER OPERA TION Connecting iPod® WARNING Do not connect/disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an acci- dent or serious injury. CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side- ...

  • Infiniti QX60 (2014) - page 278

    ● iPod® Nano - 5th generation (firmware ver- sion 1.0.1 or later) * Some features of this iPod® may not be fully functional. Make sure that your iPod® firmware is updated to the version indicated above. Audio main operation Place the ignition switch in the ACC or ON position. Press the DISC·AUX button repeatedly to switch to the iPod® mode. ...

  • Infiniti QX60 (2014) - page 279

    Interface: The interface for iP od® operation shown on the vehicle center display is similar to the iPod® interface. Use the INFINITI controller and the BACK button to play the iPod® with your favorite settings. The touchscreen can also be used to control your favorite settings. The following items can be chosen from the menu list screen. For fu ...

  • Infiniti QX60 (2014) - page 280

    When the SEEK•CA T/TRACK button is pressed or for more than 1.5 sec- onds while the iPod® is playing, the iPod® will play while fast forwarding or rewinding. When the button is released, the iPod® will return to the normal play speed. The INFINITI controller can also be used to select tracks when the iP od® is playing. RDM/RPT button: When th ...

  • Infiniti QX60 (2014) - page 281

    T o exit the scrolling by letter mode, perform one of the following: ● Press the ENTER button on the INFINITI controller. ● Push the ENTER switch on the steering wheel. ● Do not touch the controls for 2 seconds. BLUET OO TH® STREAMING AUDIO (if so equipped) If you have a compatible Bluetooth® audio de- vice that is capable of playing audio ...

  • Infiniti QX60 (2014) - page 282

    5. Enter a PIN of your choice. It will be needed by your Bluetooth® audio device to com- plete the connection process. See the Bluetooth® audio device’s owner’s manual for more information. Audio main operation T o switch to the Bluetooth® audio mode, press the DISC•AUX button repeatedly until the Bluetooth® audio mode is displayed on the ...

  • Infiniti QX60 (2014) - page 283

    The INFINITI controller can also be used to select tracks when the Bluetooth® audio play mode screen is shown on the display. (“Bluetooth au- dio” will be indicated on the header of the screen.) RDM/RPT button: Press the RDM·RPT button repeatedly to change the play mode as follows: Normal → Shuffle All T racks → Shuffle Group → Repeat 1 ...

  • Infiniti QX60 (2014) - page 284

    Connected Devices: Registered devices are shown on the list. Select a Bluetooth® device from the list, the following options will be available. ● Select Select “Select” to connect the selected de- vice to the vehicle. If there is a different device currently connected, the selected device will replace the current device. ● Edit Rename the ...

  • Infiniti QX60 (2014) - page 285

    SOURCE select switch Push the source select switch to change the mode in the following sequence: Models without Navigation System: AM → FM1 → FM2 → XM1 → XM2 → XM3 (satellite radio, if so equipped) → USB* → CD/DVD* →→ AUX* → AM. Models with Navigation System: AM → FM1 → FM2 → XM1 → XM2 → XM3 (satellite radio, if so equ ...

  • Infiniti QX60 (2014) - page 286

    Bluetooth® Audio: ● Tilt up/down for less than 1.5 seconds to increase or decrease the track number. AUX: ● Press the ENTER button to show the AUX Menu. BACK switch Press the switch to return to the previous screen or cancel the current selection. ANTENNA The antenna cannot be shortened, but can be removed. When you need to remove the antenna, ...

  • Infiniti QX60 (2014) - page 287

    ● T o avoid draining the vehicle battery, do not operate the system for more than 15 minutes without starting the engine. The front display is designed not to show the images while driving, as the driver’s attention must be given to vehicle opera- tion for safety. Sounds are available. T o show the images in the front display, stop the vehicle ...

  • Infiniti QX60 (2014) - page 288

    Rear auxiliary input jacks The rear auxiliary input jacks are located on the rear of the center console. NTSC/PAL compat- ible devices can be connected to the auxiliary jacks. The images from the connected device can be viewed on the rear displays. The rear auxiliary jacks are color coded for iden- tification purposes. ● Y ellow - video input ● ...

  • Infiniti QX60 (2014) - page 289

    V olume control: T urn the volume control knob to adjust the vol- ume. The headphones will automatically turn off after about four minutes if there is no sound during that period. The headphones will also turn off after approximately four hours of continuous use. T o prevent the battery from being discharged, keep the power turned off when not in u ...

  • Infiniti QX60 (2014) - page 290

    The selected headphone channel ( ⬙ Left ⬙ or ⬙ Right ⬙ ) 䊊 1 will appear on the menu screen on the rear display. Remote control The remote controller has the following controls: 1. POWER button 2. Display select switch (L or R) 3. MENU button 4. Directional buttons 5. Backlight button 6. SETUP button 7. (next chapter) button 8. (fast forw ...

  • Infiniti QX60 (2014) - page 291

    Select rear displays audio source: Slide the display select switch on the remote control to the left (L) or right (R) to select each screen source individually 䊊 1 . The SOURCE button on the remote control se- lects the source for front and rear screens at once 䊊 2 . Remote controller and headphones battery replacement CAUTION ● An improperly ...

  • Infiniti QX60 (2014) - page 292

    2. Replace both batteries with new ones. ● Recommended battery: Size AA 6 2 (DVD remote controller) Size AAA 6 2 (headphones) ● Be careful not to touch the battery termi- nal. ● Make sure that the (+) and (-) ends on the batteries match the markings inside the compartment. 3. Close the lid securely. ● If you will not be using the remote con ...

  • Infiniti QX60 (2014) - page 293

    Available audio sources The following sources are available to play on each display: Front display: ● Radio ● CD/DVD ● USB memory/iPod® ● Bluetooth® audio ● AUX (front) Rear display: ● DVD ● USB memory with video files ● AUX (front/rear) PLA YING A DIGIT AL VERSA TILE DISC (DVD) DISC·AUX button Park the vehicle in a safe location ...

  • Infiniti QX60 (2014) - page 294

    Press the AUX·DVD button on the control panel and turn the display to the DVD mode, and begin playing the DVD automatically . When a DVD is loaded, it will begin playing automatically . The front screen will be turned on when the AUX·DVD button is pressed while a DVD is being played, and it will turn off automatically after a period of time. T o ...

  • Infiniti QX60 (2014) - page 295

    Setting keys Select the “Settings” key with the INFINITI con- troller and press the ENTER button to adjust the following settings. The items indicated with “*” can also be set from the rear display. Press the DVD button on the remote controller while a DVD is being played. Select the preferred item using the joystick on the remote controlle ...

  • Infiniti QX60 (2014) - page 296

    Angle (DVD-VIDEO) : If the DVD contains different angles (such as moving images) , the current image angle can be switched to another one. Select the “ Angle” key and press the ENTER button. When the “+” side or “ ⫺ ” side is selected, the angle will change. Angle Mark (DVD-VIDEO) : When this item is turned on, an angle mark will be s ...

  • Infiniti QX60 (2014) - page 297

    AUX mode: The AUX (auxiliary input jacks) modes can be activated or deactivated individually . T o activate the AUX mode, press the preferred side (L or R) of the AUX button. Press the AUX button again to deactivate the AUX mode and display another mode. V olume: T o control the volume level, push the VOL button or . Display: Display settings can b ...

  • Infiniti QX60 (2014) - page 298

    ● It is not possible to display different video files, such as DVD or video files in the USB memory , on the front and rear displays at the same time. ● It is not possible to play an audio file and a video file in the same USB memory at the same time. Multiple source display It is possible to play different sources on each display . The followi ...

  • Infiniti QX60 (2014) - page 299

    When installing a CB, ham radio or car phone in your vehicle, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular phone should not be used for any purpose while driving so full atten- tion may be given to vehicle operation. Some ...

  • Infiniti QX60 (2014) - page 300

    Y our INFINITI is equipped with the Bluetooth® Hands-Free Phone System. If you have a com- patible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology, you can make or receive a hands-free telephone call with your cellular phone ...

  • Infiniti QX60 (2014) - page 301

    – Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quali ...

  • Infiniti QX60 (2014) - page 302

    Operating tips T o get the best performance out of the INFINITI V oice Recognition system, observe the following: ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing voice commands correctly. ● Wait unt ...

  • Infiniti QX60 (2014) - page 303

    ● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers and prompts you to enter more. – “six six two” The system repeats the numbers and prompts you to enter more. – “six two zero zero” ● Say ? ...

  • Infiniti QX60 (2014) - page 304

    Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in this section for more information. PHONE/END While the voice recognition system is active, press and hold the button for 5 seconds to quit the voice recognition system at any time. TUNING SWIT CH Whil ...

  • Infiniti QX60 (2014) - page 305

    Making a call by entering a phone number Main Menu “Call” 䊊 A “Phone Number” 䊊 B Speak the digits 䊊 C “Dial” 䊊 D 1. Press the button on the steering wheel. A tone will sound. 2. Say: “Call” 䊊 A . The system acknowledges the command and announces the next set of available commands. 3. Say “Phone Number” 䊊 B . The syst ...

  • Infiniti QX60 (2014) - page 306

    “Call” Main Menu “Call” (Speak name) 䊊 A “Phone Number” (Speak Digits) 䊊 B “Special Number” 䊊 C “Redial” 䊊 D “Call Back” 䊊 E (Speak name) 䊊 A If you have stored entries in the phonebook, you can dial a number associated with a name See “Phonebook” in this section to learn how to store entries. When prompted b ...

  • Infiniti QX60 (2014) - page 307

    The system announces, “T ransfer call. Call transferred to privacy mode.” The system then ends the VR session. T o reconnect the call from the cellular phone to the Bluetooth® Hands-Free System, press the button. ● “Mute” — Use the Mute command to mute your voice so the other party cannot hear it. Use the mute command again to unmute y ...

  • Infiniti QX60 (2014) - page 308

    The system confirms the name, location and number. “Delete Entry” 䊊 B Use the Delete Entry command to erase one entry from the phonebook. After the system rec- ognizes the command, speak the name to delete or say “List Names” to choose an entry. “List Names” 䊊 C Use the List Names command to hear all the names in the phonebook. The ...

  • Infiniti QX60 (2014) - page 309

    “Recent Calls” Main Menu “Recent Calls” “Outgoing” 䊊 A “Incoming” 䊊 B “Missed” 䊊 C “Call Back” 䊊 D “Redial” 䊊 E Use the Recent Calls command to access out- going, incoming, missed calls and to call back the last incoming call or to redial the last outgoing call. “Outgoing” 䊊 A Use the Outgoing command to ...

  • Infiniti QX60 (2014) - page 310

    VOICE ADAPT A TION (V A) MODE V oice Adaptation allows up to two out-of-dialect users to train the system to improve recognition accuracy . By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each connected phon ...

  • Infiniti QX60 (2014) - page 311

    ● outgoing ● call three one nine oh two ● nine seven pause pause three oh eight ● cancel ● call back number ● call star two zero nine five ● delete phone ● dial eight three zero five one ● record name ● four three pause two nine pause zero ● delete redial number ● phonebook list names ● call eight oh five four one ● corr ...

  • Infiniti QX60 (2014) - page 312

    TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the command correctly. ...

  • Infiniti QX60 (2014) - page 313

    WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you ...

  • Infiniti QX60 (2014) - page 314

    phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. INFINITI V oice Recognition system supports the phone c ...

  • Infiniti QX60 (2014) - page 315

    REGULA T ORY INFORMA TION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. – Operation is subject to the following two con- ditions: 1. This device ma ...

  • Infiniti QX60 (2014) - page 316

    CONNECTING PROCEDURE Press the SETTING button on the control panel, then select the “Bluetooth” key on the display. Menu Item Result Bluetooth ON/OFF Allows user to switch Bluetooth on and off. Bluetooth must be on in order to connect device On T urns Bluetooth on Off T urns Bluetooth off Connect Bluetooth Upon pressing this button, a popup box ...

  • Infiniti QX60 (2014) - page 317

    VEHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset Phonebook” , in this section. If your phonebook does not automati- cally do ...

  • Infiniti QX60 (2014) - page 318

    HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phone’s phonebook. Since this method allows for up to 1000 numbers to be stored and entries are automatically assigned voice tags by the system, this is a useful function for easy dialing supported by the Voice Recogni- tion system. T ransferring the handset phoneb ...

  • Infiniti QX60 (2014) - page 319

    MAKING A CALL Press the button on the steering wheel. The ⬙ Phone ⬙ screen will appear on the display . Select one of the following options to make a call: Menu Item Result V ehicle Phonebook Select the name from an entry stored in the vehicle phonebook. Dialing commences immediately. Call History Select the name from the incoming or outgoing c ...

  • Infiniti QX60 (2014) - page 320

    RECEIVING A CALL When you hear a phone ring, the display will change to phone mode. T o receive a call, follow one of the procedures listed below: Menu Item Result Press the button on the steering wheel Accept an incoming call to talk ⬙ Answer ⬙ key on the display Accept an incoming call to talk ⬙ Hold Call ⬙ key on the display Put an incom ...

  • Infiniti QX60 (2014) - page 321

    ENDING A CALL T o finish the call, perform one of the following procedures: Menu Item Result ⬙ Hang up ⬙ key on the ⬙ Call in Prog- ress ⬙ Display Finish the call. button on the steering wheel Finish the call. PHONE SETTINGS T o set up the Bluetooth Hands-Free Phone System to your perferred settings, press the SETTING button on the control ...

  • Infiniti QX60 (2014) - page 322

    BLUET OO TH SETTINGS T o set up the Bluetooth Hands-Free Phone Sys- tem to your preferred settings, press the SET - TING button on the control panel and select the ⬙ Bluetooth ⬙ key on the display. Menu Item Result Bluetooth T urn the Bluetooth system on or off. Connect Bluetooth See ⬙ Connecting Procedure ⬙ in this section for more informa ...

  • Infiniti QX60 (2014) - page 323

    CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if reception between callers is unclear. T o access the volume settings, press the SETTING button, then select ”Volume and Beeps” . Y ou can also adjust the volume of an incoming voice during a call by pushing the vol- ume control switch on the steering wheel or by t ...

  • Infiniti QX60 (2014) - page 324

    INFINITI Voice Recognition allows hands-free operation of the systems equipped on this ve- hicle, such as phone and vehicle information. There are two voice recognition modes of opera- tion available. They are: ● Standard Mode ● Alternate Command Mode In Standard Mode (the factory default setting) , commands that are available are always shown ...

  • Infiniti QX60 (2014) - page 325

    Menu Item Result Getting Started The following message will appear: ⬙ With voice recognition, you can use voice commands to control navigation, audio, phone, and other functions. T o start the voice recognition system, push the T ALK switch on the steering wheel, then say a command after the tone ⬙ Let’s Practice Initiates a practice session ...

  • Infiniti QX60 (2014) - page 326

    V oice recognition settings The available settings of the INFINITI V oice Rec- ognition system are described. 1. Press the SETTING button on the control panel 2. Select the ”Others” key 3. Select the “V oice Recognition” key Y ou can confirm the page by scrolling the screen using the NISSAN controller. Menu Item Result Command List When Alt ...

  • Infiniti QX60 (2014) - page 327

    USING THE S Y STEM Initialization When the ignition switch is placed in the ON position, INFINITI V oice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the switch is pressed before the initializa- tion completes, voice commands will not be ac- cepted. Please wait until the INF ...

  • Infiniti QX60 (2014) - page 328

    Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those that are displayed are not accepted. Please follow the prompts given by the sys- tem. ● If the command is not reco ...

  • Infiniti QX60 (2014) - page 329

    Standard Mode command list Category Command: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays Vehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V eh ...

  • Infiniti QX60 (2014) - page 330

    Information Command: COMMAND ACTION Fuel Economy Displays Fuel Economy information. Maintenance Displays Maintenance information. T raffic Info. T urns the traffic information system on and off. Where am I? Displays current vehicle location. Audio Command: COMMAND ACTION AM Changes the audio system mode to AM radio. FM Changes the audio system mode ...

  • Infiniti QX60 (2014) - page 331

    V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the button located on the steer- ing wheel. 2. The system announces, “Would you like to access Phone, Navigat ...

  • Infiniti QX60 (2014) - page 332

    ● If you say “Change Number” during phone number entry , the system will automatically request that you repeat the number using the 3-3-4 format. In this case please say the area code first and then follow the prompts. ● Do not add a “1” in front of the area code when speaking phone numbers. ● If the system does not recognize your com ...

  • Infiniti QX60 (2014) - page 333

    Please note that in this mode the recognition success rate may be affected as the number of available commands and ways of speaking each command are increased. Y ou can turn this mode ON or OFF . When this mode is activated, the V oice Recognition Settings will change to show more options. Activating Alternate Command Mode 1. Press the SETTING butt ...

  • Infiniti QX60 (2014) - page 334

    Alternate Command Mode command list Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook. International Call Makes an international call by allowing more than 10 digi ...

  • Infiniti QX60 (2014) - page 335

    COMMAND ACTION Birdview Map Changes the Map display to Birdview. Planview Map Changes the Map display to a 2-dimensional view. North Up Changes the Map display to keep north pointing up on the screen. Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen. Zoom In <1 to 13> Changes the map scale to a ...

  • Infiniti QX60 (2014) - page 336

    Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the control panel. 2. Press the “Others” key . 3. Select the “V oice Recognition” key. 4. Select the “User Guide” key. 5. Select ...

  • Infiniti QX60 (2014) - page 337

    Giving voice commands 1. Press and release the button located on the steering wheel. 2. A list of commands appears on the screen, and the system announces, “Please say a command from the displayed list or say Help to show all commands.” 3. After the tone sounds and the icon on the screen changes from to , speak a command. 4. Once a command is r ...

  • Infiniti QX60 (2014) - page 338

    ● T o minimize the amount of prompts spoken by the system in Alternate Command Mode, use the Minimize V oice Feedback function. T o access the Minimize Voice Feedback function press the SETTING button, then select the “Others” key. Then select the “V oice Recognition” key. How to speak numbers V oice Recognition requires a certain way to ...

  • Infiniti QX60 (2014) - page 339

    SPEAKER ADAPT A TION FUNCTION The Voice Recognition system has a function to learn the user’s voice for better voice recognition performance. The system can memorize the voices of up to three persons. Having the system learn the user’s voice 1. Press the SETTING button on the control panel 2. Select the “Others” key 3. Select the “V oice ...

  • Infiniti QX60 (2014) - page 340

    TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message So ...

  • Infiniti QX60 (2014) - page 341

    5 Starting and driving Precautions when starting and driving ................5 - 4 Exhaust gas (carbon monoxide) ..................5 - 4 Three-way catalyst ..............................5 - 4 Tire Pressure Monitoring System (TPMS) ..........5 - 5 On-pavement and off-road driving precautions ....................................5 - 8 Avoiding collisi ...

  • Infiniti QX60 (2014) - page 342

    Precautions on cruise control . .................. 5-51 Cruise control operations ....................... 5-51 Intelligent cruise control (ICC) system (Full Speed Range) (if so equipped) ................ 5-53 Selecting the vehicle-to-vehicle distance control mode .................................. 5-54 V ehicle-to-vehicle distance control mode .... ...

  • Infiniti QX60 (2014) - page 343

    Tire equipment ............................... 5-100 Special winter equipment ...................... 5-100 Driving on snow or ice ........................ 5-100 Engine block heater (if so equipped) ............ 5-101 ...

  • Infiniti QX60 (2014) - page 344

    WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca ...

  • Infiniti QX60 (2014) - page 345

    ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in th ...

  • Infiniti QX60 (2014) - page 346

    ● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommend ...

  • Infiniti QX60 (2014) - page 347

    ● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your INFINITI retailer as soon as possible for tire replacement and/or system resetting. ● Replacin ...

  • Infiniti QX60 (2014) - page 348

    Operation: 1. Add air to the tire. 2. After a few seconds, the hazard indicators will start flashing. 3. When the designated pressure is reached, the horn beeps once and the hazard indica- tors stop flashing. 4. Perform the above steps for each tire. ● If the tire is over-inflated more than ap- proximately 4 psi (30 kPa) , the horn beeps and the ...

  • Infiniti QX60 (2014) - page 349

    cause the vehicle to roll over, particularly if the loss of control causes the vehicle to slide sideways. Be attentive at all times, and avoid driving when tired. Never drive when under the influence of alcohol or drugs (including pre- scription or over-the-counter drugs which may cause drowsiness) . Always wear your seat belt as outlined in the ? ...

  • Infiniti QX60 (2014) - page 350

    1. Remain calm and do not overreact. 2. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 3. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle. 4. Gradually steer the vehicle to a safe location off the road and away from traffic if possible. 5. Lightly apply the brake ...

  • Infiniti QX60 (2014) - page 351

    ● Do not drive across steep slopes. In- stead drive either straight up or straight down the slopes. Off-road vehicles can tip over sideways much more easily than they can forward or backward. ● Many hills are too steep for any vehicle. If you drive up them, you may stall. If you drive down them, you may not be able to control your speed. If you ...

  • Infiniti QX60 (2014) - page 352

    ● Accelerating quickly, sharp steering maneuvers or sudden braking may cause loss of control. ● If at all possible, avoid sharp turning maneuvers, particularly at high speeds. Y our INFINITI vehicle has a higher cen- ter of gravity than a passenger car. The vehicle is not designed for cornering at the same speeds as passenger cars. Failure to o ...

  • Infiniti QX60 (2014) - page 353

    When the ignition switch is pushed without de- pressing the brake pedal, the ignition switch will illuminate. Push the ignition switch center: ● once to change to ACC. ● two times to change to ON. ● three times to return to OFF. The ignition switch will automatically return to the L OCK position when any door is either opened or closed with t ...

  • Infiniti QX60 (2014) - page 354

    The operating range of the engine start function is inside of the vehicle 䊊 1 . ● The luggage area is not included in the op- erating range, but the Intelligent Key may function. ● If the Intelligent K ey is placed on the instru- ment panel, inside the glove box, storage bin or door pocket, the Intelligent Key may not function. ● If the Int ...

  • Infiniti QX60 (2014) - page 355

    INFINITI INTELLIGENT KEY BA TTER Y DISCHARGE If the battery of the Intelligent Key is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine accord- ing to the following procedure: 1. Place the shift lever in the P (Park) position. 2. Firmly apply the foot brake. 3. T ouch the ignition switch with the ...

  • Infiniti QX60 (2014) - page 356

    ● Make sure the area around the vehicle is clear. ● Check fluid levels such as engine oil, cool- ant, brake fluid, and windshield-washer fluid as frequently as possible, or at least when- ever you refuel. ● Check that all windows and lights are clean. ● Visually inspect tires for their appearance and condition. Also check tires for proper i ...

  • Infiniti QX60 (2014) - page 357

    NO TE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone char- gers, GPS, DVD players, etc.) 2. V ehicle is not driven regularly and/or only driven ...

  • Infiniti QX60 (2014) - page 358

    ● Do not downshift abruptly on slippery roads. This may cause a loss of control. ● Except in an emergency, do not shift to the N (Neutral) position while driving. Coasting with the transmission in the N (Neutral) position may cause serious damage to the transmission. Shifting Press the button 䊊 A while depressing the brake pedal Press the but ...

  • Infiniti QX60 (2014) - page 359

    R (Reverse) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed and the shift lever button pushed in to move th ...

  • Infiniti QX60 (2014) - page 360

    ● In the manual shift mode, the transmis- sion may not shift to the selected gear. This helps maintain driving perfor- mance and reduces the chance of ve- hicle damage or loss of control. ● When this situation occurs, the Con- tinuously Variable T ransmission (CVT) position indicator light will blink and the chime will sound. ● In the manual ...

  • Infiniti QX60 (2014) - page 361

    High fluid temperature protection mode This transmission has a high fluid temperature pro- tection mode. If the fluid temperature becomes too high (for example, when climbing steep grades in high temperature with heavy loads, such as when towing a trailer) , engine power and, under some conditions, vehicle speed will be decreased auto- matically to ...

  • Infiniti QX60 (2014) - page 362

    T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Move the shift lever to the P (Park) position. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out. Four driving modes can be selected by using the drive mode selector switch, ST ANDARD ...

  • Infiniti QX60 (2014) - page 363

    ECO MODE Adjusts the engine and transmission to enhance fuel economy. NO TE: Selecting this drive mode will not necessar- ily improve fuel economy as many driving factors influence its effectiveness. Operation T urn the drive mode select switch to the ECO position. “ECO” appears in the vehicle informa- tion display for 2 seconds and the ECO dri ...

  • Infiniti QX60 (2014) - page 364

    Adjusting the ECO pedal system reaction force: The ECO pedal system reaction force can be adjusted. The reaction force setting will be main- tained until the setting is changed even if the engine is turned off. Setting ECO pedal reaction force: 1. Press the SETTING 䊊 1 button and select “ECO DRIVE” on the display using the INFINITI controller ...

  • Infiniti QX60 (2014) - page 365

    3. T o set the reaction force of the ECO pedal system, select “Standard” or “Soft”. 4. T o turn off the ECO pedal system, select “OFF” , select “ON” and press the ENTER 䊊 2 button. When the ECO pedal system is tuned off, the accelerator will operate nor- mally . The Lane Departure Warning (LDW) system/ Lane Departure Prevention (L ...

  • Infiniti QX60 (2014) - page 366

    on the instrument panel blinks in orange and a warning chime sounds. When the LDP system is on, it will automatically apply the brakes for a short period of time, using the function of the V ehicle Dynamic Control (VDC) system. LANE DEP ARTURE W ARNING (LDW) S Y STEM Precautions on LDW system WARNING ● This system is only a warning device to info ...

  • Infiniti QX60 (2014) - page 367

    ● On roads where there are sharply contrast- ing objects, such as shadows, snow, water, wheel ruts, seams or lines remaining after road repairs. (The LDW system could detect these items as lane markers.) ● On roads where the traveling lane merges or separates. ● When the vehicle’s traveling direction does not align with the lane marker. ● ...

  • Infiniti QX60 (2014) - page 368

    3. T o set the LDW system to on or off, use the buttons to navigate in the menu and use the ENTER button to select or change an item: ● Select “Lane” and press the ENTER but- ton. – T o turn on the warning, use the ENTER button to check box for “Warning (LDW)” – T o turn on the assistance system, use the ENTER button to check box for ...

  • Infiniti QX60 (2014) - page 369

    – When driving without normal tire conditions (for example, tire wear, low tire pressure, installation of spare tire, tire chains, non-standard wheels) . – When the vehicle is equipped with nonoriginal brake parts or suspen- sion parts. – When you are towing a trailer or other vehicle. ● If the LDP system malfunctions, it will cancel automa ...

  • Infiniti QX60 (2014) - page 370

    LDP system operation The LDP system provides a lane departure warn- ing and can automatically apply the brakes when the vehicle is driven at speeds of approximately 45 MPH (70 km/h) and above. When the vehicle approaches either the left or the right side of the traveling lane, a warning chime will sound and the LDW indicator light (orange) on the i ...

  • Infiniti QX60 (2014) - page 371

    2. Select “Driver Aids” , and press the ENTER button. 3. T o set the LDP system to on or off, use the buttons to navigate in the menu and use the ENTER button to select or change an item: ● Select “Lane” and press the ENTER but- ton. – T o turn on the warning, use the ENTER button to check box for W arning (LDW)” – T o turn on the a ...

  • Infiniti QX60 (2014) - page 372

    LANE CAMERA UNIT MAINTENANCE The lane camera unit 䊊 1 for the LDW/LDP sys- tem is located above the inside mirror. T o keep the proper operation of the LDW/ LDP systems and prevent a system malfunction, be sure to observe the following: ● Always keep the windshield clean. ● Do not attach a sticker (including transpar- ent material) or install ...

  • Infiniti QX60 (2014) - page 373

    ● The BSW system operates above ap- proximately 20 MPH (32 km/h). ● The BSI system operates above ap- proximately 37 MPH (60 km/h). BLIND SPO T WARNING (BSW) S Y STEM/BLIND SPO T INTERVENTION® (BSI) S Y STEMS The Blind Spot Warning (BSW) and Blind Spot Intervention® (BSI) systems can help alert the driver of other vehicles in adjacent lanes w ...

  • Infiniti QX60 (2014) - page 374

    The BSI system operates above approximately 37 MPH (60 km/h). If the system detects a ve- hicle in the detection zone and your vehicle is approaching the lane marker, the BSI system provides an audible warning (three times) , flashes the Blind Spot Warning indicator light and slightly applies the brakes for a short period of time on one side to hel ...

  • Infiniti QX60 (2014) - page 375

    When the warning systems switch is turned off, the indicator 䊊 1 on the switch is off. The indicator will also be off if the BSW , the Lane Departure W arning (LDW) and the Forward Collision Warn- ing (FCW) systems are deactivated. How to enable/disable the BSW system Perform the following steps to enable or disable the BSW system. 1. Press the b ...

  • Infiniti QX60 (2014) - page 376

    BSI S Y STEM OPERA TION If the radar sensors detect vehicles in the detec- tion zone, the Blind Spot Warning indicator light located near the outside mirrors illuminates. If your vehicle is approaching a lane marker, the system chimes a sound (three times) and the Blind Spot Warning indicator light flashes. Then the system applies the brakes on one ...

  • Infiniti QX60 (2014) - page 377

    The BSI system turns on when the dynamic driver assistance switch on the steering wheel is pushed when the “Blind Spot Intervention” is enabled in the settings menu on the vehicle infor- mation display. The BSI ON indicator light on the instrument panel illuminates when the BSI sys- tem is turned on. The BSI system provides a chime and turns on ...

  • Infiniti QX60 (2014) - page 378

    BSW/BSI system precautions WARNING ● The radar sensors may not be able to detect and activate BSW/BSI when cer- tain objects are present such as: – Pedestrians, bicycles, or animals. – Vehicles such as motorcycles, low height vehicles, or high ground clear- ance vehicles. – Oncoming vehicles. – Vehicles remaining in the detection zone whe ...

  • Infiniti QX60 (2014) - page 379

    – When the headlights are not bright due to dirt on the lens or if aiming is not adjusted properly. – When strong light enters a lane cam- era unit. (For example: light directly shines on the front of the vehicle at sunrise or sunset.) – When a sudden change in brightness occurs. (For example: when the ve- hicle enters or exits a tunnel or un ...

  • Infiniti QX60 (2014) - page 380

    Illustration 2: If the driver activates the turn signal then the system chimes a sound (twice) and the Blind Spot W arning indicator light flashes. NO TE: If the driver activates the turn signal before a vehicle enters the detection zone, the Blind Spot Warning indicator light will flash but no chime will sound when the other vehicle is detected. I ...

  • Infiniti QX60 (2014) - page 381

    Overtaking other vehicles Illustration 5: The Blind Spot Warning indicator light illuminates if you overtake a vehicle and that vehicle stays in the detection zone for approxi- mately 3 seconds. The radar sensors may not detect slower moving vehicles if they are passed quickly . Illustration 6: If the driver activates the turn signal while another ...

  • Infiniti QX60 (2014) - page 382

    NO TE: Illustration 8: When overtaking several ve- hicles in a row, the vehicles after the first vehicle may not be detected if they are traveling close together. Entering from the side Illustration 9: The Blind Spot Warning indicator light illuminates if a vehicle enters the detection zone from either side. NO TE: The radar sensors may not detect ...

  • Infiniti QX60 (2014) - page 383

    Illustration 11: If the BSI system is on and your vehicle approaches the lane marker while another vehicle is in the detection zone, the Blind Spot W arning indicator light flashes and a chime will sound three times. Then, the BSI system slightly applies the brakes on the appropriate side to help return the vehicle back to the center of the driving ...

  • Infiniti QX60 (2014) - page 384

    THE BACK -UP COLLISION INTERVENTION (BCI) S Y STEM (if so equipped) WARNING ● The BCI system is not a replacement for proper driving procedure, is not de- signed to prevent contact with vehicles or objects and does not provide full brake power. When backing out of park- ing space, always use the side and rear mirrors and turn and look in the dire ...

  • Infiniti QX60 (2014) - page 385

    If the radar detects a vehicle approaching from the side or the sonar detects close stationary objects behind the vehicle, the system gives vi- sual and audible warnings, and then applies the brake for a moment when the vehicle is moving backwards if no action is taken by the driver. After the automatic brake application, the driver must depress th ...

  • Infiniti QX60 (2014) - page 386

    BCI system operation WARNING ● Always check surroundings and turn to check what is behind you before back- ing up. The radar sensors detect ap- proaching (moving) vehicles. The radar sensors cannot detect every object such as: – Pedestrians, bicycles, motorcycles, animals or child operated toy vehicles – A vehicle that passing at speeds great ...

  • Infiniti QX60 (2014) - page 387

    If the radar detects an approaching vehicle from the side, the system chimes a sound (single beep) , the Blind Spot Warning indicator light on the side the approaching vehicle flashes and a yellow rectangular frame appears in display “A ”. NO TE: ● In the case of several vehicles approaching in a row (Illustration 1) or in the opposite direct ...

  • Infiniti QX60 (2014) - page 388

    If the driver’s foot is on the accelerator pedal, the system moves the accelerator pedal upward be- fore the braking is applied. However, if you con- tinue to apply the accelerator, the system will not engage the brakes. NO TE: The system does not operate if the object is very close to the bumper. The BCI system automatically turns on every time ...

  • Infiniti QX60 (2014) - page 389

    2. Select “Back-up Collision Interv.” , and press the ENTER button. 3. T o set the BCI system to on or off, use the buttons to navigate in the menu and use the ENTER button to select or change an item. BCI temporarily not available If the following messages appear on the vehicle information display, a chime will sound and the BCI system will be ...

  • Infiniti QX60 (2014) - page 390

    RADAR MAINTENANCE The two radar sensors 䊊 1 for the BSW, BSI and BCI systems are located near the rear bumper. Always keep the area near the radar sensors clean. The radar sensors may be blocked by temporary ambient conditions such as splashing water, mist or fog. The blocked condition may also be caused by objects such as ice, frost or dirt obst ...

  • Infiniti QX60 (2014) - page 391

    PRECAUTIONS ON CRUISE CONTROL 1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. ON·OFF switch ● If the cruise control system malfunctions, it will cancel automatically . The SET indicator in the vehicle information display will blink to warn the driver. ● If the engine coolant temperature becomes excessively high, the cruise control ...

  • Infiniti QX60 (2014) - page 392

    T o set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. The SET indicator light in the vehicle information display will illuminate. T ake your foot off the accelerator pedal. Y our vehicle maintains the set speed. ● T o pass another vehicle, depress the ac- celerator pedal. When you release t ...

  • Infiniti QX60 (2014) - page 393

    The Intelligent Cruise Control (ICC) system maintains a selected distance from the vehicle in front of you within the speed range of 0 to 90 MPH (0 to 144 km/h) up to the set speed. The set speed can be selected by the driver between 20 to 90 MPH (32 to 144 km/h). The vehicle travels at a set speed when the road ahead is clear. The ICC system can b ...

  • Infiniti QX60 (2014) - page 394

    1. V ehicle-to-vehicle distance control mode 2. Conventional (fixed speed) cruise control mode Push the CRUISE ON/OFF switch 䊊 A to choose the cruise control mode between the vehicle-to- vehicle distance control mode 䊊 1 and the con- ventional (fixed speed) cruise control mode 䊊 2 . T o choose the vehicle-to-vehicle distance control mode 䊊 ...

  • Infiniti QX60 (2014) - page 395

    PRECAUTIONS ON VEHICLE- T O- VEHICLE DIST ANCE CONTROL MODE The system is intended to enhance the operation of the vehicle when following a vehicle traveling in the same lane and direction. If the distance sensor 䊊 A detects a slower mov- ing vehicle ahead, the system will reduce the vehicle speed so that your vehicle follows the vehicle in front ...

  • Infiniti QX60 (2014) - page 396

    – On roads where the traffic is heavy or there are sharp curves – On slippery road surfaces such as on ice or snow, etc . – During bad weather (rain, fog, snow, etc .) – When rain, snow or dirt adhere to the bumper around the distance sensor – On steep downhill roads (the vehicle may go beyond the set vehicle speed and frequent braking ma ...

  • Infiniti QX60 (2014) - page 397

    returned from the vehicle ahead. Therefore, if the sensor cannot detect the reflection from the ve- hicle ahead, the ICC system may not maintain the selected distance. The following are some conditions in which the sensor cannot detect the signals: ● When snow or road spray from traveling vehicles reduces the sensor’s visibility ● When excess ...

  • Infiniti QX60 (2014) - page 398

    The detection zone of the ICC sensor is limited. A vehicle ahead must be in the detection zone for the vehicle-to-vehicle distance detection mode to maintain the selected distance from the vehicle ahead. A vehicle ahead may move outside of the detec- tion zone due to its position within the same lane of travel. Motorcycles may not be detected in th ...

  • Infiniti QX60 (2014) - page 399

    When driving on some roads, such as winding, hilly , curved, narrow roads, or roads which are under construction, the ICC sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the ICC system to decelerate or accelerate the vehicle. The detection of vehicles may also be affected by ve ...

  • Infiniti QX60 (2014) - page 400

    Intelligent cruise control switch The system is operated by the CRUISE ON/OFF switch and four control switches, all mounted on the steering wheel. 1. ACCEL/RES switch: Resumes set speed or increases speed in- crementally . 2. COAST/SET switch: Sets desired cruise speed, reduces speed incrementally . 3. CANCEL switch: Deactivates the system without ...

  • Infiniti QX60 (2014) - page 401

    3. Set distance indicator: Displays the selected distance between ve- hicles set with the distance switch. 4. Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is dis- played in km/h. 5. Intelligent Cruise Control system warning light (orange): The light comes on if there is a malfunction in the ICC system ...

  • Infiniti QX60 (2014) - page 402

    ● When the shift lever is not in the D (Drive) or Manual mode ● When the parking brake is applied ● When the brakes are operated by the driver When the COAST/SET switch is pushed under the following conditions, the system cannot be set. A warning chime will sound and a message will pop up. ● When the SNOW mode switch is ON (T o use the ICC ...

  • Infiniti QX60 (2014) - page 403

    System operation WARNING Normally when controlling the distance to a vehicle ahead, this system automatically accelerates or decelerates your vehicle according to the speed of the vehicle ahead. Depress the accelerator to prop- erly accelerate your vehicle when accel- eration is required for a lane change. De- press the brake pedal when deceleratio ...

  • Infiniti QX60 (2014) - page 404

    How to change the set vehicle speed T o cancel the preset speed, use any of these methods: ● Push the CANCEL switch. The set vehicle speed indicator will go out. ● T ap the brake pedal. The set vehicle speed indicator will go out. ● T urn the CRUISE ON/OFF switch off. The ICC indicators will go out. T o reset at a faster cruising speed, use o ...

  • Infiniti QX60 (2014) - page 405

    Distance Approximate distance at 60 MPH (100 km/h) [ft (m)] 1. Long 180 (55) 2. Average 130 (40) 3. Short 80 (25) ● The distance to the vehicle ahead will change according to the vehicle speed. The higher the vehicle speed, the longer the dis- tance. ● If the engine is stopped, the set distance becomes “long” . (Each time the engine is star ...

  • Infiniti QX60 (2014) - page 406

    Also, the sensor sensitivity can be affected by vehicle operation (steering maneuver or driving position in the lane) or traffic or vehicle condition (for example, if a vehicle is being driven with some damage) . Automatic cancellation A chime sounds under the following conditions and the control is automatically canceled. ● When the vehicle ahea ...

  • Infiniti QX60 (2014) - page 407

    Action to take: If the warning light comes on, park the vehicle in a safe place, turn the engine off. When the radar signal is temporarily interrupted, clean the sensor area of the front bumper and perform the settings again. Condition C: When the ICC system is not operating properly, the chime sounds and the system warning light (orange) will come ...

  • Infiniti QX60 (2014) - page 408

    ● Do not attach metallic objects near the sen- sor area (brush guard, etc.) This could cause failure or malfunction. ● Do not alter, remove, or paint the front bum- per. Before customizing or restoring the front bumper, please contact an INFINITI retailer. CONVENTIONAL (fixed speed) CRUISE CONTROL MODE This mode allows driving at a speed betwee ...

  • Infiniti QX60 (2014) - page 409

    4. CANCEL switch: Deactivates the system without erasing the set speed. Conventional (fixed speed) cruise control mode display and indicators The display is located between the speedometer and tachometer. 1. CRUISE ON/OFF switch indicator: Indicates that the CRUISE ON/OFF switch is ON. 2. Cruise set switch indicator: Displays while the vehicle spee ...

  • Infiniti QX60 (2014) - page 410

    Operating conventional (fixed speed) cruise control mode T o turn on the conventional (fixed speed) cruise control mode, push and hold the CRUISE ON/OFF switch 䊊 A for longer than about 1.5 seconds. When pushing the CRUISE ON/OFF switch on, the Intelligent Cruise Control system display and the CRUISE indicator are displayed in the vehicle informa ...

  • Infiniti QX60 (2014) - page 411

    T o cancel the preset speed, use any of the following methods: 1. Push the CANCEL button. The SET indica- tor will go out. 2. T ap the brake pedal. The SET indicator will go out. 3. T urn the CRUISE ON/OFF switch off. Both the CRUISE indicator and SET indicator will go out. T o reset at a faster cruising speed, use one of the following three method ...

  • Infiniti QX60 (2014) - page 412

    PREVIEW FUNCTION (for Intelligent Cruise Control system equipped models) The ICC system with the preview function iden- tifies the need to apply emergency braking by sensing the vehicle ahead in the same lane and the distance to the vehicle ahead and relative speed from it, it applies the brake pre-pressure before the driver depresses the brake ped ...

  • Infiniti QX60 (2014) - page 413

    The detection range of the sensor is approxi- mately 490 ft (150 m) ahead. WARNING ● This system is only an aid to assist the driver and is not a collision warning or avoidance device. It is the driver’s re- sponsibility to stay alert, drive safely and be in control of the vehicle at all times. ● This system will not adapt automatically to ro ...

  • Infiniti QX60 (2014) - page 414

    DIST ANCE CONTROL ASSIST OPERA TION Always pay attention to the operation of the ve- hicle and be ready to manually decelerate to maintain the proper following distance. The Dis- tance Control Assist (DCA) system may not be able to decelerate the vehicle under some cir- cumstances. The DCA system uses a sensor 䊊 A located be- hind the front bumpe ...

  • Infiniti QX60 (2014) - page 415

    The detection zone of the sensor is limited. A vehicle ahead must be in the detection zone for the system to operate. A vehicle ahead may move outside of the detec- tion zone due to its position within the same lane of travel. Motorcycles may not be detected in the same lane ahead if they are traveling offset from the centerline of the lane. A vehi ...

  • Infiniti QX60 (2014) - page 416

    When driving on some roads, such as winding, hilly , curved, narrow roads, or roads which are under construction, the sensor may detect ve- hicles in a different lane, or may temporarily not detect a vehicle traveling ahead. This may cause the system to work inappropriately. The detection of vehicles may also be affected by vehicle operation (steer ...

  • Infiniti QX60 (2014) - page 417

    2. V ehicle ahead detection indicator: Indicates whether it detects a vehicle in front of you. T o turn on the DCA system, push the dynamic driver assistance switch 䊊 1 on the steering wheel after starting the engine. The Distance Control Assist (DCA) system switch indicator light 䊊 2 in the vehicle information display will illuminate. Push the ...

  • Infiniti QX60 (2014) - page 418

    For additional information on LDP and BSI, see “Lane Departure Warning (LDW) system/Lane Departure Prevention (LDP) system and Blind Spot W arning/Blind Spot Intervention” in this section. Under the following conditions, the Distance Control Assist system will not operate and the DCA cancellation message will pop up: ● When the SNOW mode swit ...

  • Infiniti QX60 (2014) - page 419

    System operation WARNING The Distance Control Assist system auto- matically decelerates your vehicle to help assist the driver to maintain a following distance from the vehicle ahead. Manually brake when deceleration is required to maintain a safe distance upon sudden braking by the vehicle ahead or when a vehicle suddenly appears in front of you. ...

  • Infiniti QX60 (2014) - page 420

    Approach warning If your vehicle comes closer to the vehicle ahead due to rapid deceleration of that vehicle or if another vehicle cuts in, the system warns the driver with the chime and DCA system display. Decelerate by depressing the brake pedal to maintain a safe vehicle distance if: ● The chime sounds. ● The vehicle ahead detection indicato ...

  • Infiniti QX60 (2014) - page 421

    ● When the VDC system is turned off ● When the VDC or ABS (including the trac- tion control system) operates ● When the SNOW mode switch is turned ON Action to take: When the conditions listed above are no longer present, turn the system off with the dynamic driver assistance switch. T urn the DCA system back on to use the system. Condition B ...

  • Infiniti QX60 (2014) - page 422

    If it is not possible to set the system or the indicator stays on, it may indicate that the system is malfunctioning. Although the ve- hicle is still driveable under normal condi- tions, have the vehicle checked at an INFINITI retailer. Sensor maintenance How to handle the sensor: The sensor for the DCA system is common with Intelligent Cruise Cont ...

  • Infiniti QX60 (2014) - page 423

    PRECAUTIONS ON FCW S Y STEM WARNING ● The FCW system is intended to warn you before a collision occurs; it cannot prevent a collision. It is the driver’s re- sponsibility to stay alert, drive safely and be in control of the vehicle at all times. ● As there is a performance limit, the sys- tem may not provide a warning in cer- tain conditions. ...

  • Infiniti QX60 (2014) - page 424

    – When there is a highly reflective ob- ject near the vehicle ahead (for ex- ample, being very close to another vehicle, signboard, etc .) – When you are towing a trailer. ● Depending on certain road conditions (curved or beginning of a curve) , vehicle conditions (steering position or vehicle position) , or the preceding vehicle’s conditio ...

  • Infiniti QX60 (2014) - page 425

    FCW S Y STEM OPERA TION The FCW system is active at speeds of approxi- mately 10 MPH (15 km/h) and above, when the system turns on. The warning systems switch is used to turn on and off the FCW system when it is activated using the settings menu on the information dis- play . See “How to enable/disable the FCW sys- tem” using the settings menu ...

  • Infiniti QX60 (2014) - page 426

    The Intelligent Brake Assist (IBA) system warns the driver by a warning light and chime when there is a risk of a collision with the vehicle ahead in the traveling lane and the driver must take avoidance action immediately. The system helps reduce the rear-end collision speed by applying the brakes when the system judges that the col- lision cannot ...

  • Infiniti QX60 (2014) - page 427

    – Pedestrians, animals or obstacles in the roadway – Oncoming vehicles in the same lane ● The sensor generally detects the sig- nals returned from the vehicle ahead. Therefore, the system may not function properly under the following conditions: – When the sensor area of the front bumper gets dirty and it is impos- sible to detect the dista ...

  • Infiniti QX60 (2014) - page 428

    ● The system is designed to automatically check the sensor’s functionality. When the sensor detects an obstruction of the radar signals due to dirt, adhesive ma- terial, or similar objects to the front bumper, the system will automatically cancel. However, sensor may not detect all obstructive material. In these in- stances the system may not b ...

  • Infiniti QX60 (2014) - page 429

    CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these rec- ommendations may result in shortened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, eith ...

  • Infiniti QX60 (2014) - page 430

    7. Avoid Idling ● Shutting off your engine when safe for stops exceeding 30–60 seconds saves fuel and reduces emissions 8. Buy an Automated Pass for T oll Roads ● Automated passes permit drivers to use special lanes to maintain cruising speed through the toll and avoid stopping and starting 9. Winter Warm Up ● Limit idling time to minimize ...

  • Infiniti QX60 (2014) - page 431

    If the AWD error warning message is displayed, there may be a malfunction in the Intelligent AWD system. Reduce vehicle speed and have your vehicle checked by an INFINITI retailer as soon as possible. The AWD high temperature message may be displayed while trying to free a stuck vehicle due to increased oil temperature. The driving mode may change ...

  • Infiniti QX60 (2014) - page 432

    WARNING ● Do not drive beyond the performance capability of the tires. Accelerating quickly, sharp steering maneuvers or sudden braking may cause loss of con- trol, even with Intelligent AWD engaged. ● For AWD equipped vehicles, do not at- tempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with ...

  • Infiniti QX60 (2014) - page 433

    WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) . Fail- ure to do so could cause the vehicle to move unexpectedly or roll away and re- sult in ...

  • Infiniti QX60 (2014) - page 434

    WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering. Y ou will still have control of the vehicle but the steering will ...

  • Infiniti QX60 (2014) - page 435

    WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. W et brakes When th ...

  • Infiniti QX60 (2014) - page 436

    WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or rev ...

  • Infiniti QX60 (2014) - page 437

    When the VDC system operates, the indi- cator in the instrument panel flashes so note the following: ● The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path. ● Y ou may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and ind ...

  • Infiniti QX60 (2014) - page 438

    ● When driving on extremely inclined sur- faces such as higher banked corners, the VDC system may not operate prop- erly and the indicator may flash or both the and indicator lights may illuminate. Do not drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the indicator may flash or ...

  • Infiniti QX60 (2014) - page 439

    ● If brake related parts such as brake pads, rotors and calipers are not INFINITI recommended or are extremely deteriorated, the VDC system may not operate properly and the VDC warning light may illuminate. ● If engine control related parts are not INFINITI recommended or are extremely deteriorated, the VDC warning light may illuminate. ● Whe ...

  • Infiniti QX60 (2014) - page 440

    FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole, or use the INFINITI Intelligent Key . ANTI-FREEZE In the winter when it is anticipated that the tem- perature will drop below 32°F (0°C) , check the anti-freeze to ...

  • Infiniti QX60 (2014) - page 441

    ● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement. ● Allow greater following distances on slippery roads. ● Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reach- ing it. T ry not to brak ...

  • Infiniti QX60 (2014) - page 442

    MEMO 5-102 Starting and driving ...

  • Infiniti QX60 (2014) - page 443

    6 In case of emergency Roadside assistance program .......................6 - 2 Emergency engine shut off .........................6 - 2 Hazard warning flasher switch ......................6 - 2 Flat tire ...........................................6 - 3 Tire Pressure Monitoring System (TPMS) ..........6 - 3 Changing a flat tire .................... ...

  • Infiniti QX60 (2014) - page 444

    In the event of a roadside emergency, Roadside Assistance Service is available to you. Please refer to your Warranty Information Booklet (U.S.) or the Warranty & Roadside Assistance Informa- tion Booklet (Canada) for details. T o shut off the engine in an emergency situation while driving, perform the following procedure: – Rapidly push the p ...

  • Infiniti QX60 (2014) - page 445

    The flashers will operate with the ignition switch placed in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the l ...

  • Infiniti QX60 (2014) - page 446

    ● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your INFINITI retailer as soon as possible for tire replacement and/or system resetting. ● Replacin ...

  • Infiniti QX60 (2014) - page 447

    Getting the spare tire and tools 1. Open the liftgate, and lift the luggage board in the cargo area using the handle 䊊 A . 2. Remove the jack and tool kit cover by lifting up using the handles. 3. Remove the tool kit 䊊 B . ● T o release the tool kit, release the hook and eye straps 䊊 C . LCE2035 LCE2036 LCE2037 In case of emergency 6-5 ...

  • Infiniti QX60 (2014) - page 448

    4. Remove the jack. ● The jack is secured by a fastener 䊊 D ,t o release the fastener assemble the exten- sion 䊊 E into the wheel nut wrench 䊊 F as illustrated and rotate counterclockwise to release. ● Insert the flat end of the wheel nut wrench 䊊 F into the slot of the fastener 䊊 D , and rotate counterclockwise to release the jack. 5 ...

  • Infiniti QX60 (2014) - page 449

    ● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack. It may cause the vehicle to move. This is especially true for vehicles with limited slip differe ...

  • Infiniti QX60 (2014) - page 450

    3. Install the assembled jack rod into the jack as shown. 4. T o lift the vehicle, securely hold the jack lever and rod. Carefully raise the vehicle until the tire clears the ground. NO TE: If the lug nut wrench/jack handle contacts the ground while raising the vehicle, disas- semble the lug nut wrench from the jack extension rod, rotate it 90 degr ...

  • Infiniti QX60 (2014) - page 451

    4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence illustrated ( 䊊 A , 䊊 B , 䊊 C , 䊊 D , 䊊 E ) . Lower the vehicle completely . WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. Th ...

  • Infiniti QX60 (2014) - page 452

    T o start your engine with a booster battery, the instructions and precautions below must be fol- lowed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always pres- ent in the vicinity of the battery. Keep all spark ...

  • Infiniti QX60 (2014) - page 453

    WARNING Always follow the instructions below. Fail- ure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift lever to P ...

  • Infiniti QX60 (2014) - page 454

    CAUTION ● CVT models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ● Do not push start this vehicle. The three-way catalyst may be damaged. WARNING ● Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. ● T o avoid the danger of being scalded, n ...

  • Infiniti QX60 (2014) - page 455

    6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary . Have your vehicle repaired at an INFINITI retailer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Inco ...

  • Infiniti QX60 (2014) - page 456

    All-Wheel Drive (AWD) models INFINITI recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow AWD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain. LCE2042 6-14 In case of emergency ...

  • Infiniti QX60 (2014) - page 457

    Front-Wheel Drive models INFINITI recommends that your vehicle be towed with the driving wheels (front) off the ground or place the vehicle on a flat bed truck as illustrated. WARNING ● Never tow your vehicle with the front wheels on the ground or four wheels on the ground (forward or backward) , as this may cause serious and expensive damage to ...

  • Infiniti QX60 (2014) - page 458

    If your vehicle is stuck in sand, snow, mud, etc., use a tow strap or other device designed specifi- cally for vehicle recovery. Always follow the manufacturer’s instructions for the recovery de- vice. Do not use the tie-down hooks for towing or vehicle recovery. Rocking a stuck vehicle WARNING ● Stand clear of a stuck vehicle. ● Do not spin ...

  • Infiniti QX60 (2014) - page 459

    7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi ...

  • Infiniti QX60 (2014) - page 460

    In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti ...

  • Infiniti QX60 (2014) - page 461

    REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at an INFINITI retailer or any automotive acces- sory store. UNDERBOD Y In areas where road salt is used in winter, it is necessary to clea ...

  • Infiniti QX60 (2014) - page 462

    Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth. Regular care and cleaning is required in order to maintain the appearance of the leather ...

  • Infiniti QX60 (2014) - page 463

    ● Clean oil based stains by patting the surface with a clean soft cloth damp- ened in warm water. Press a clean dry cloth onto the surface to remove as much dampness as possible and then let air dry. FL OOR MA TS WARNING T o avoid potential pedal interference that may result in a collision or injury: ● NEVER place a floor mat on top of an- othe ...

  • Infiniti QX60 (2014) - page 464

    Genuine INFINITI floor mats have been specially designed for your vehicle model. The floor mats have grommet holes incorporated in them. Posi- tion each mat by placing the floor mat bracket hook through the floor mat grommet holes while centering the mat in the floorwell. Periodically check to make certain the mats are properly positioned. SEA T BE ...

  • Infiniti QX60 (2014) - page 465

    T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process. Road salt also accel- erates the disintegration of paint surfaces. T O PRO TECT Y OUR VEHICL ...

  • Infiniti QX60 (2014) - page 466

    MEMO 7-8 Appearance and care ...

  • Infiniti QX60 (2014) - page 467

    8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions ...........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ............ ...

  • Infiniti QX60 (2014) - page 468

    Y our INFINITI has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money. However, some day-to-day and regular mainte- nance is essential to maintain your INFINITI’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to m ...

  • Infiniti QX60 (2014) - page 469

    When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim. Road wheel nuts (lug nuts)* When ...

  • Infiniti QX60 (2014) - page 470

    Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely. Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange noi ...

  • Infiniti QX60 (2014) - page 471

    When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking brake securely and block the wheels to prevent ...

  • Infiniti QX60 (2014) - page 472

    VQ35DE engine 1. P ower steering fluid reservoir 2. Engine coolant reservoir 3. Drive belt location 4. Fuse box 5. Engine oil filler cap 6. Brake fluid reservoir 7. Air cleaner 8. Fuse box 9. Fuse box/Fusible links 10 Fuse box 11. Battery 12. Engine oil dipstick 13. Radiator cap 14. Windshield-washer fluid reservoir NO TE: Engine cover removed for ...

  • Infiniti QX60 (2014) - page 473

    The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution con- tains rust and corrosion inhibitors. Additional en- gine cooling system additives are not necessary. WARNING ● ...

  • Infiniti QX60 (2014) - page 474

    CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level, add coolant to the MAX level. If the reservoir is empty, check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with coolant up to ...

  • Infiniti QX60 (2014) - page 475

    CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Re- insert it all the way. 5. Remove the di ...

  • Infiniti QX60 (2014) - page 476

    CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap 䊊 A by turning it counterclockwise. 4. Place a large drain pan under the drain plug 䊊 B . 5. Remove the drain plug 䊊 B with a wrench ...

  • Infiniti QX60 (2014) - page 477

    CHANGING ENGINE OIL FIL TER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 A . 4. Loosen the oil filter 䊊 A with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. CAUTION Be careful not to burn you ...

  • Infiniti QX60 (2014) - page 478

    Check the fluid level in the reservoir. The fluid level should be checked when the fluid is cold at fluid temperatures of 32 to 86ºF (0 to 30ºC) . The fluid level can be checked with the level gauge which is attached to the cap. T o check the fluid level, remove the cap. The fluid level should be between the MAX 䊊 1 and MIN 䊊 2 lines. If the ...

  • Infiniti QX60 (2014) - page 479

    Check the fluid level in the reservoir. If the brake fluid is below the MIN line 䊊 B , the brake warning light will illuminate. Add brake fluid up to the MAX line 䊊 A . (See “RECOMMENDED FUEL/LUBRICANTS AND CAPACITIES” in the “ T echnical and consumer information” section for the recommended type of brake fluid.) If the brake fluid must ...

  • Infiniti QX60 (2014) - page 480

    ● Keep the battery surface clean and dry . Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge. NO TE: Care should be taken to avoid ...

  • Infiniti QX60 (2014) - page 481

    1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. V ehicles operated in high temperatures or under severe co ...

  • Infiniti QX60 (2014) - page 482

    CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery. Y our vehicle is equipped with a variable voltage control system. T ...

  • Infiniti QX60 (2014) - page 483

    2. Have the belt checked regularly for condi- tion and tension in accordance with the maintenance schedule found in your “INFINITI Service and Maintenance Guide”. REPLACING SP ARK PLUGS Iridium-tipped spark plugs It is not necessary to replace iridium-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much ...

  • Infiniti QX60 (2014) - page 484

    Clean and replace the air cleaner filter according to the maintenance log shown in the “NISSAN Service and Maintenance Guide.” When replac- ing the filter, wipe the inside of the air cleaner filter housing and the cover with a damp cloth. T o remove the air cleaner filter: 䊊 1 Unlatch the clips and move the air cleaner cover upward. Remove th ...

  • Infiniti QX60 (2014) - page 485

    REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 䊊 2 Push the release tab, then move the wiper blade down the wiper arm to remove. 䊊 3 Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place. 5. Rotate the wiper blade so the dimple is in the groove. ...

  • Infiniti QX60 (2014) - page 486

    Rear window wiper blade Contact an INFINITI retailer if checking or re- placement is required. If the brakes do not operate properly , have the brakes checked by an INFINITI retailer. Self-adjusting brakes Y our vehicle is equipped with self-adjusting brakes. The front and rear disc-type brakes self-adjust every time the brake pedal is applied. WAR ...

  • Infiniti QX60 (2014) - page 487

    ENGINE COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the engine hood. 3. Remove th ...

  • Infiniti QX60 (2014) - page 488

    P ASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the glove box to access th ...

  • Infiniti QX60 (2014) - page 489

    Extended storage switch If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse. NO TE: The extended storage switch is used for long term vehicle storage. Even if the ex- tended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switch with a new fuse. Ho ...

  • Infiniti QX60 (2014) - page 490

    INFINITI INTELLIGENT KEY Replace the battery in the Intelligent Key as fol- lows: 1. Remove the mechanical key from the Intelli- gent Key . 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. 3. Replace the battery with a new one. Recom ...

  • Infiniti QX60 (2014) - page 491

    or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with RSS-210 of In- dustry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interfer ...

  • Infiniti QX60 (2014) - page 492

    EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight assembly* High/ Low 35 D2S Park 5 W5W T urn 21 PY21W Sidemarker 5 W5W Front fog lights 55 H11 Daytime running lights (Canada only) 19 PS19W Room/map lights 8 – Footwell light 3.4 158 Personal lights 8 P27 Glove box light* 8 258 Step light 3.4 194 Courtesy light* — — Puddle light ...

  • Infiniti QX60 (2014) - page 493

    1. Headlight assembly 2 Map light 3 Personal light 4. Fog light/ Daytime running light (Canada only) 5. Cargo light 6. Courtesy light 7. Rear combination light 8. License plate light Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicate ...

  • Infiniti QX60 (2014) - page 494

    Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Map lights LDI2094 Personal lights WDI0670 V anity mirror LDI2096 8-28 Maintenance and do-it-yourself ...

  • Infiniti QX60 (2014) - page 495

    Use a cloth 䊊 1 to protect the housing. 䊊 1 Remove the trim surrounding the housing. 䊊 2 Remove the two screws holding the assem- bly to the vehicle. 䊊 3 Remove the assembly. 䊊 4 Replace the necessary bulbs. Cargo light WDI0206 Rear combination light LDI2085 Maintenance and do-it-yourself 8-29 ...

  • Infiniti QX60 (2014) - page 496

    If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the “Tir ...

  • Infiniti QX60 (2014) - page 497

    WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross V ehicle Weight Rating (GVWR) is located on the F .M .V.S.S./C.M .V .S.S. certifica- tion label. The vehicle weight ca- pacity is indicated on the Tire and Loading Information label. Do not load your vehicle beyond this capacity. Overloading your ve- hicle ...

  • Infiniti QX60 (2014) - page 498

    Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 Original tire size: The size of the tires originally installed on the vehicle at the factory . 䊊 3 Cold tire pressure: Inflate the tires to this pressure when the tires are cold. Tires are considered COLD after the ...

  • Infiniti QX60 (2014) - page 499

    Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove ...

  • Infiniti QX60 (2014) - page 500

    䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge. 3. T wo-digit number (65): This number, known as the aspect ratio, gi ...

  • Infiniti QX60 (2014) - page 501

    䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three- ...

  • Infiniti QX60 (2014) - page 502

    䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi ...

  • Infiniti QX60 (2014) - page 503

    Generally , snow tires have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed. Never ex- ceed the maximum speed rating of the tire. If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels. For additional traction on icy roads, studded tires m ...

  • Infiniti QX60 (2014) - page 504

    Wheel nut tightening torque: 83 ft-lb (113 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv ...

  • Infiniti QX60 (2014) - page 505

    Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the ...

  • Infiniti QX60 (2014) - page 506

    Care of wheels ● Wash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. ● Do not use abrasive cleaners when washing the wheels. ● Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressur ...

  • Infiniti QX60 (2014) - page 507

    9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation ...........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations ..............................9 - 6 Specifications ................................. ...

  • Infiniti QX60 (2014) - page 508

    The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 19-1/2 gal 16-1/4 gal ...

  • Infiniti QX60 (2014) - page 509

    FUEL RECOMMENDA TION INFINITI recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you ...

  • Infiniti QX60 (2014) - page 510

    ● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol) . It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors. If not properly formu- lated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicl ...

  • Infiniti QX60 (2014) - page 511

    ENGINE OIL AND OIL FIL TER RECOMMENDA TIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See ⬙ Capacities and recommended fuel/lubricants ⬙ earlier in this section. INFINITI recommends the use of an en- ergy conserving oil in order to ...

  • Infiniti QX60 (2014) - page 512

    Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin ...

  • Infiniti QX60 (2014) - page 513

    ENGINE Model VQ35DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.45 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary. CVT (in “N” position) Ignition timing (degree B.T.D.C. at idle speed) C ...

  • Infiniti QX60 (2014) - page 514

    WHEELS AND TIRES Wheel type Offset in (mm) Size Aluminum 1.97 (50) 18 x 7.5J 1.97 (50) 20 x 7.5J Spare Wheel - Steel 18 x4T Tire size 235/65R18 235/55R20 Spare tire T165/90D18 DIMENSIONS AND WEIGHTS Overall length in (mm) 196.4 (4,989) Overall width in (mm) 77.2 (1,960) Overall height without roof rack in (mm) 67.8 (1,723) with roof rack in (mm) 71 ...

  • Infiniti QX60 (2014) - page 515

    When planning to drive your INFINITI ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where a ...

  • Infiniti QX60 (2014) - page 516

    ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor Vehicle Safety Standard (F .M.V.S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross Vehicle W eight Ratings (GVWR) , Gross Axle W eigh ...

  • Infiniti QX60 (2014) - page 517

    TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. WTI0058 WTI0173 T echnical and consumer information 9-11 ...

  • Infiniti QX60 (2014) - page 518

    Use the following steps to mount the front license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag: Only use the recommended mounting position, otherwise the Intelligent Cruise Control (ICC) sensor obstruction (if so equipped) may result. ● License plate bracket ● License plate bracket ...

  • Infiniti QX60 (2014) - page 519

    5. Insert the grommets into the holes in the bumper fascia. 6. Insert a small flat-bladed screwdriver into the grommet hole to turn the threaded part of the grommet 90° 䊊 E . Mark the center of the hole 䊊 F on both sides with a felt-tip pen. Remove the bracket from the bum- per, and then open 0.79 in (20 mm) diameter holes on the bumper using ...

  • Infiniti QX60 (2014) - page 520

    ● GVW (Gross V ehicle W eight) - curb weight plus the combined weight of passengers and cargo. ● GVWR (Gross V ehicle Weight Rat- ing) - maximum total combined weight of the unloaded vehicle, pas- sengers, luggage, hitch, trailer tongue load and any other optional equipment. This information is lo- cated on the F .M.V .S.S./C.M.V .S.S. certific ...

  • Infiniti QX60 (2014) - page 521

    Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX ...

  • Infiniti QX60 (2014) - page 522

    5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av ...

  • Infiniti QX60 (2014) - page 523

    L OADING TIPS ● The GVW must not exceed GVWR or GA WR as specified on the F .M.V .S.S./C.M.V .S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR. WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seat- ...

  • Infiniti QX60 (2014) - page 524

    MAXIMUM L OAD LIMITS Maximum trailer loads Never allow the total trailer load to exceed the value specified in the following T owing Load/Specification Chart found later in this sec- tion. The total trailer load equals trailer weight plus its cargo weight. ● When towing a trailer load of 3,500 lbs. (1,587 kg) or more, trailers with a brake system ...

  • Infiniti QX60 (2014) - page 525

    T ongue load When using a weight carrying or a weight distrib- uting hitch, keep the tongue load between 10 - 15 percent of the total trailer load or use the trailer tongue load specified by the trailer manu- facturer. The tongue load must be within the maximum tongue load limits shown in the follow- ing “T owing Load/Specification” chart. If t ...

  • Infiniti QX60 (2014) - page 526

    T o determine the available towing capacity , use the following procedure. 1. Find the GCWR for your vehicle on the ⬙ T owing Load/Specification ⬙ chart found later in this section. 2. Subtract the actual vehicle weight from the GCWR. The remaining amount is the avail- able maximum towing capacity . T o determine the Gross T railer Weight, weig ...

  • Infiniti QX60 (2014) - page 527

    T OWING L OAD/SPECIFICA TION T OWING L OAD/SPECIFICA TION CHART U.S. and Canada Maximum T owing Capacity*1 5,000lb. (2,268 kg) Maximum T ongue Load 500 lb. (227 kg) Maximum Gross Combined Weight Rating 10,000 lb. (4, 536 kg) *1: The towing capacity values are calculated assuming a base vehicle with driver and any options required to achieve the rat ...

  • Infiniti QX60 (2014) - page 528

    WARNING T railer hitch components have specific weight ratings. Y our vehicle may be ca- pable of towing a trailer heavier than the weight rating of the hitch components. Never exceed the weight rating of the hitch components. Doing so can cause serious personal injury or property damage. Hitch ball Choose a hitch ball of the proper size and weight ...

  • Infiniti QX60 (2014) - page 529

    WARNING Properly adjust the weight distributing hitch so the rear of the bumper is no higher than the measured reference height when the trailer is attached. If the rear bumper is higher than the measured reference height when loaded, the vehicle may handle unpredictably which could cause a loss of vehicle control and cause serious personal injury ...

  • Infiniti QX60 (2014) - page 530

    T railer brakes When towing a trailer load of 3,500 lbs. (1,587 kg) or more, trailers with a brake system MUST be used. However, most states require a separate braking system on trailers with a loaded weight above a specific amount. Make sure the trailer meets the local regulations and the regulations where you plan to tow. Several types of braking ...

  • Infiniti QX60 (2014) - page 531

    2. Locate the jumper harness connector under the lower portion of the instrument panel. The connector is taped to the wiring harness 䊊 1 as indicated. ● The connector is marked with a white tag with “elec brake conn” . Wire color designation for electric trailer brake controller jumper harness. WIRE COLOR NO TE RED/GREEN V ehicle stop lamp ...

  • Infiniti QX60 (2014) - page 532

    ● Always secure items in the trailer to prevent load shift while driving. ● Keep the cargo load as low as possible in the trailer to keep the trailer center of gravity low . ● Load the trailer so approximately 60% of the trailer load is in the front half and 40% is in the back half. Also make sure the load is balanced side to side. ● Check ...

  • Infiniti QX60 (2014) - page 533

    ● While going downhill, the weight of the trailer pushing on the tow vehicle may de- crease overall stability. Therefore, to main- tain adequate control, reduce your speed and shift to a lower gear. Avoid long or repeated use of the brakes when descend- ing a hill, as this reduces their effectiveness and could cause overheating. Shifting to a low ...

  • Infiniti QX60 (2014) - page 534

    ● When launching a boat, don’t allow the wa- ter level to go over the exhaust tail pipe or rear bumper. ● Make sure you disconnect the trailer lights before backing the trailer into the water or the trailer lights may burn out. When towing a trailer, final drive gear oil should be replaced and transmission oil/fluid should be changed more fre ...

  • Infiniti QX60 (2014) - page 535

    WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s. T emperature A , B and C The temperature grades are A (the highest) , B, and C, representing the tire’s resistance to the generation of heat, and its abi ...

  • Infiniti QX60 (2014) - page 536

    For USA If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying INFINITI. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect ex ...

  • Infiniti QX60 (2014) - page 537

    WARNING A vehicle equipped with All -Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dyna- mometers used by some states for emis- sions testing) , or similar equipment. Make sure you inform the test facility personnel that your vehicle is equipped with AWD before it is placed on a dynamometer. Using the wrong tes ...

  • Infiniti QX60 (2014) - page 538

    the type of personally identifying data routinely acquired during a crash investigation. T o read data recorded by an EDR, special equip- ment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manu- facturer and INFINITI retailer, other parties, such as law enforcement, that have the special equip- ment, can rea ...

  • Infiniti QX60 (2014) - page 539

    10 Index A Aiming control, headlights ........... 2 - 3 3 Air bag (See supplemental restraint s y s t e m ) ..................... 1 - 5 3 Air bag system Front (See supplemental front impact air bag system) ............... 1 - 6 1 A i r b a g w a r n i n g l a b e l s ............. 1 - 6 8 A i r b a g w a r n i n g l i g h t ........... 1 - 6 9 , 2 ...

  • Infiniti QX60 (2014) - page 540

    Continuously V ariable T ransmission (CVT) fluid .................. 8 - 1 1 Driving with Continuously Variable T ransmission (CVT) ............. 5 - 1 7 Control panel buttons .............. 4 - 1 1 Brightness/contrast button ...... 4 - 1 0 , 4 - 2 1 E n t e r b u t t o n ............... 4 - 4 , 4 - 1 1 Without navigation system .......... 4 - 4 Con ...

  • Infiniti QX60 (2014) - page 541

    G Garage door opener, HomeLink® Universal T r a n s c e i v e r .................... 2 - 5 7 G a s c a p ..................... 3 - 2 4 Gauge Engine coolant temperature gauge ..... 2 - 5 Fuel gauge ................... 2 - 6 Odometer ................... 2 - 4 Speedometer ................. 2 - 4 T achometer .................. 2 - 5 T rip odometer ... ...

  • Infiniti QX60 (2014) - page 542

    C h a r g e w a r n i n g l i g h t ............. 2 - 8 F o g l i g h t s w i t c h ............... 2 - 3 4 Headlight and turn signal switch ...... 2 - 3 0 H e a d l i g h t c o n t r o l s w i t c h .......... 2 - 3 1 H e a d l i g h t s .................. 8 - 2 5 I n t e r i o r l i g h t .................. 2 - 5 5 L i g h t b u l b s ........... ...

  • Infiniti QX60 (2014) - page 543

    Precautions on supplemental restraint s y s t e m .................... 1 - 5 3 Precautions when starting and driving .... 5 - 4 Pre-tensioner seat belt system ......... 1 - 6 7 Push starting ................... 6 - 1 2 R Radio Car phone or CB radio ........... 4 - 1 0 9 FM/AM/SA T radio with compact disc (CD) player .................. 4 - 7 0 Steer ...

  • Infiniti QX60 (2014) - page 544

    Rear window wiper and washer switches ................... 2 - 2 9 T u r n s i g n a l s w i t c h .............. 2 - 3 4 V ehicle dynamic control (VDC) off s w i t c h ..................... 2 - 4 0 Windshield wiper and washer switch . . .2-26 T T achometer .................... 2 - 5 T emperature gauge Engine coolant temperature gauge ..... 2 - 5 Th ...

  • Infiniti QX60 (2014) - page 545

    Windows Locking passengers’ windows ....... 2 - 5 0 Power rear windows ............. 2 - 5 1 Power windows ............... 2 - 5 0 Rear power windows ............ 2 - 5 1 Windshield-washer fluid ............. 8 - 1 3 Windshield wiper and washer switch ..... 2 - 2 6 Wiper Rear window wiper and washer switches ................... 2 - 2 9 Windshield ...

  • Infiniti QX60 (2014) - page 546

    RECOMMENDED FUEL: INFINITI recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regu- lar gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you m ...

  • Infiniti QX60 (2014) - page 547

    2014 Infiniti QX60 Owner’s M anual Printing: June 2013 (04) / OM14E 0L50U0 / Printed in U.S.A. For y our safety , read c arefully and keep in thi s v ehicle. 2014 Infiniti QX60 1335541_EN_QX60_JX_OM.indd 1 5/14/13 2:28 PM ...

Manufacturer Infiniti Category Car

Documents that we receive from a manufacturer of a Infiniti QX60 (2014) can be divided into several groups. They are, among others:
- Infiniti technical drawings
- QX60 (2014) manuals
- Infiniti product data sheets
- information booklets
- or energy labels Infiniti QX60 (2014)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Infiniti QX60 (2014).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Infiniti QX60 (2014), service manual, brief instructions and user manuals Infiniti QX60 (2014). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Infiniti QX60 (2014).

Similar manuals

A complete manual for the device Infiniti QX60 (2014), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Infiniti QX60 (2014) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Infiniti QX60 (2014).

A complete Infiniti manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Infiniti QX60 (2014) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Infiniti QX60 (2014), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Infiniti QX60 (2014), that we can find in the current document
3. Tips how to use the basic functions of the device Infiniti QX60 (2014) - which should help us in our first steps of using Infiniti QX60 (2014)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Infiniti QX60 (2014)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Infiniti QX60 (2014) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Infiniti QX60 (2014)?

Use the form below

If you did not solve your problem by using a manual Infiniti QX60 (2014), ask a question using the form below. If a user had a similar problem with Infiniti QX60 (2014) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)