English dropdown-ico

Manual Hitachi CP-X206

73 pages 4.32 mb
Download

Go to site of 73

Summary
  • Hitachi CP-X206 - page 1

    1 Projector CP-X206/CP-X306 User's Manual (detailed) Operating Guide Thank you for purchasing this projector . ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” rst. After reading them, store them in a safe place for future reference. WARNING • The information in this manual is subj ...

  • Hitachi CP-X206 - page 2

    2 Contents Contents About this manual . . . . . . . . . . . 1 Contents . ................. 2 Projector features . . ......... 3 Prepar a tions . . ............. 3 Contents of package . . . . . . . . . . . . . 3 Fastening the lens cover . . . . . . . . . . 3 Par t names . ............... 4 P r o j e c t o r ...................... 4 C o n t r o l p a ...

  • Hitachi CP-X206 - page 3

    3 Projector features / Prepar ations • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector . Use special caution for the lens. NO TE Projector features The projector provides you with the broad use by the following features. Preparations Contents of package Please see ...

  • Hitachi CP-X206 - page 4

    4 Par t names Part names Projector (1) Lamp cover (  60 ) The lamp unit is inside. (2) Focus ring (  18 ) (3) Zoom ring (  18 ) (4) Control panel (  5 ) (5) Elevator buttons (x 2) (  18 ) (6) Elevator feet (x 2) (  18 ) (7) Remote sensor (  13 ) (8) Lens (  65 ) (9) Lens cover (  3 ) (10) Intake vents (1 1) Filter cover ( ...

  • Hitachi CP-X206 - page 5

    5 Par t names Control panel (1) ST ANDBY/ON button (  15 ) (2) INPUT button (  16, 22 ) (3) MENU button (  22 ) It consists of four cursor buttons. (4) POWER indicator (  15, 67 ) (5) TEMP indicator (  67 ) (6) LAMP indicator (  67 ) R ear panel (  10 ) (1) AUDIO IN1 port (2) AUDIO IN2 port (3) AUDIO OUT port (4) COMPUTER IN1 p ...

  • Hitachi CP-X206 - page 6

    6 Par t names R emote control (1) VIDEO button (  17 ) (2) COMPUTER button (  16 ) (3) SEARCH button (  17 ) (4) ST ANDBY/ON button (  15 ) (5) ASPECT button (  17 ) (6) AUTO button (  19 ) (7) BLANK button (  21 ) (8) MAGNIFY - ON button (  20 ) (9) MAGNIFY - OFF button (  14, 20 ) (10) MY SOURCE/DOC.CAMERA button (  ...

  • Hitachi CP-X206 - page 7

    7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending fr ...

  • Hitachi CP-X206 - page 8

    8 Setting up On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. Screen size (diagonal) 4 : 3 screen 16 : 9 screen Projection distance Screen height Screen ...

  • Hitachi CP-X206 - page 9

    9 Setting up ►Place the projector in a stable horizontal position. If the projector falls or is knocked over , it could cause injury and/or damage to the projector . Using a damaged projector could then result in re and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined ...

  • Hitachi CP-X206 - page 10

    10 Setting up Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. ►Do not disassemble or modify the projector ...

  • Hitachi CP-X206 - page 11

    1 1 Setting up • Be sure to read the manuals for devices before connecting them to the projector , and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Be sure to consult to the administrator of the network. Do not connect LAN ...

  • Hitachi CP-X206 - page 12

    12 Setting up Connecting pow er suppl y 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in re and/or electrical shock. • Only use the power cord th ...

  • Hitachi CP-X206 - page 13

    13 Remote control Remote control About the remote contr ol signal The remote control works with the projector ’s remote sensor . This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to the left and right of the sensor) within 3 meters about. Inst ...

  • Hitachi CP-X206 - page 14

    14 Remote control Changing the frequency of r emote contr ol signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly , attempt to change the signal frequency . In order to set the Mode, please keep pressing the combination of two buttons listed below ...

  • Hitachi CP-X206 - page 15

    15 Po wer on/of f 1. Make sure that the power cord is rmly and correctly connected to the projector and the outlet. T ur ning on the power 2. Remove the lens cover , and set the power switch to ON position (marked “ I ”). The POWER indicator will light up in steady orange (  67 ). Then wait several seconds because the buttons may not func ...

  • Hitachi CP-X206 - page 16

    16 COMPUTER IN 1  COMPUTER IN 2 VIDEO  S-VIDEO  COMPONENT (Y , Cb/Pb, Cr/Pr) Operating Operating 1. Adjusting the v olume Use the VOLUME + / VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds. ? ...

  • Hitachi CP-X206 - page 17

    17 Operating 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below . Selecting an input signal (continued) ● While TURN ON is selected for AUTO SEARCH item in OPTION menu, the projector will keep checking every port sequentially till an input signal is det ...

  • Hitachi CP-X206 - page 18

    18 Operating Adjusting the projector's eleva tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 10 degrees. ...

  • Hitachi CP-X206 - page 19

    19 Operating 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation. T o comp ...

  • Hitachi CP-X206 - page 20

    20 Operating • The zoom level can be nely adjusted. Closely watch the screen to nd the level you want. NO TE 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and the projector will go into the MAGNIFY mode. When the ON button of MAGNIFY is pressed rst after the projector is s ...

  • Hitachi CP-X206 - page 21

    21 Operating 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu (  37 ). T o exit from the BLANK screen and return to the input signal screen, press BLANK button again. T empor aril y blanking the scr een ● The projector automatically ...

  • Hitachi CP-X206 - page 22

    22 Operating 1. Press the MENU button on the remote control or the projector . The Advanced Menu or EASY MENU, which has priority just after powered on will appear . If you want to move the menu position, use the cursor buttons after pressing the POSITION button. While the projector is displaying any menu, the MENU button on the projector works as ...

  • Hitachi CP-X206 - page 23

    23 Operating Using the menu function (continued) ● Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed. ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, H PHASE, VOLUME) cannot be reset. ● ...

  • Hitachi CP-X206 - page 24

    24 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons switches the mode for aspect ratio. See the ASPECT item in IMAGE menu (  29 ). AUTO KEYSTONE EXECUTE Using ...

  • Hitachi CP-X206 - page 25

    25 EASY MENU EASY MENU (continued) Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. See BRIGHTNESS item in PICTURE menu (  26 ). CONTRAST Using the ◄/► buttons adjusts the contrast. See CONTRAST item in PICTURE menu (  26 ). COLOR Using the ◄/► buttons adjusts the strength of whole color . See COLOR item i ...

  • Hitachi CP-X206 - page 26

    26 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using the ▲/▼ buttons adjusts the brightness. Lig ...

  • Hitachi CP-X206 - page 27

    27 PICTURE menu PICTURE menu (continued) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. T o adjust CUST OM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode. OFFSET adjustments ...

  • Hitachi CP-X206 - page 28

    28 PICTURE menu PICTURE menu (continued) Item Description SHARPNESS Using the ▲/▼ buttons adjusts the sharpness. Strong ó Weak • There may be some noise and/or the screen may icker for a moment when an adjustment is made. This is not a malfunction. MY MEMOR Y This projector has 4 memories for adjustment data (for all the items of PICTURE ...

  • Hitachi CP-X206 - page 29

    29 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description ASPECT Using the ▲/▼ buttons switches the mode for aspect ratio. F ...

  • Hitachi CP-X206 - page 30

    30 IMAGE menu IMAGE menu (continued) Item Description H POSITION Using the ▲/▼ buttons adjusts the horizontal position. Left ó Right • Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs, please reset the horizontal position to the default setting. Pressing RESET button when H POSITION is selected w ...

  • Hitachi CP-X206 - page 31

    31 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description PROGRESSIVE Using the ▲/▼ buttons switches the progress mode. TV ? ...

  • Hitachi CP-X206 - page 32

    32 INPUT menu INPUT menu (continued) Item Description VIDEO FORMA T The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) Using the ▲/▼ buttons switches the mode for video format. AUT O ó NTSC ó P AL ó SECAM N-P AL ó M-P AL ó NTSC4.43 • This item is performed only for a vid ...

  • Hitachi CP-X206 - page 33

    33 INPUT menu INPUT menu (continued) Item Description RESOLUTION The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector . (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to ...

  • Hitachi CP-X206 - page 34

    34 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item Description AUTO KEYSTONE EXECUTE Selecting this item performs the automatic k ...

  • Hitachi CP-X206 - page 35

    35 SETUP menu SETUP menu (continued) Item Description WHISPER Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When WHISPER is selected, acou stic noise and screen brightne ss are reduced. MIRROR Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó H:INVERT ó V:INVER T ó H&V :INVERT If the T r ...

  • Hitachi CP-X206 - page 36

    36 A UDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table. Item Description VOLUME Using the ▲/▼ buttons adjusts the volume. High ó Low ...

  • Hitachi CP-X206 - page 37

    37 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the ▲/▼ buttons switches the OSD (On Screen Disp ...

  • Hitachi CP-X206 - page 38

    38 Item Description ST ART UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature MyScreen Screen can be registered by the MyScreen item (  below ) . ORIGINAL Screen preset as the standard screen ...

  • Hitachi CP-X206 - page 39

    39 SCREEN menu SCREEN menu (continued) Item Description MyScreen (continued) When the registration is completed, the registered screen and the following message are displayed for several seconds: “MyScreen registration is nished.” If the registration failed, the following message is displayed: “A capturing error has occurred. Please try ag ...

  • Hitachi CP-X206 - page 40

    40 SCREEN menu SCREEN menu (continued) Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be name ...

  • Hitachi CP-X206 - page 41

    41 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FIL TER TIME. Then perform it according to the following table. Item Description AUTO SEARCH Using ...

  • Hitachi CP-X206 - page 42

    42 OPTION menu OPTION menu (continued) Item Description AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When th e time i s set t o 0, th e proje ctor is not tur ned of f automatica lly . When the time is set to 1 to 99, and when the ...

  • Hitachi CP-X206 - page 43

    43 OPTION menu OPTION menu (continued) Item Description MY BUTT ON This item is to assign one of the following functions to MY BUTT ON 1 and 2 on the remote control (  6 ). Choose 1 or 2 on the MY BUTT ON menu using the ◄/► button rst. Then using the ▲/▼ buttons sets one of the following functions to the chosen button. • COMPUTER1: ...

  • Hitachi CP-X206 - page 44

    44 OPTION menu OPTION menu (continued) Item Description SERVICE (continued) F AN SPEED Using the ▲/▼ buttons the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected. HIGH ó NORMAL AUTO ADJUST Using the ▲/▼ buttons to select one of the mode. When the ...

  • Hitachi CP-X206 - page 45

    45 OPTION menu OPTION menu (continued) Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the ST ANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally . This function does not h ...

  • Hitachi CP-X206 - page 46

    46 OPTION menu OPTION menu (continued) Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please ask your local dealer . 1. Using Security Features 1.1 Inputting the P ASSWORD 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press th ...

  • Hitachi CP-X206 - page 47

    47 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 1.3 If you have forgotten your P ASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER P ASSWORD box. 1.3-2 While the ENTER P ASSWORD box is displayed, press and hold the RESET button for about 3 seconds, or press and hold the INPUT button for 3 seconds while pr ...

  • Hitachi CP-X206 - page 48

    48 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 2.2-4 Move the cursor to the right side of the P ASSWORD AGAIN box and press the ► button to display the P ASSWORD for about 20 seconds, please make note of the P ASSWORD during this time. Pressing the ENTER button will return to MyScreen P ASSWORD on/off menu. When a P ...

  • Hitachi CP-X206 - page 49

    49 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 3.1-3 Input a 4 part PIN Code using the ▲, ▼, ◄, ►, COMPUTER and INPUT buttons. A PIN Code again box will appear . Reenter the same PIN Code. This will co ...

  • Hitachi CP-X206 - page 50

    50 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 4. Using the T ransition Detector Function While the T ransition Detector function is ON, when power switch is started to supply to the projector , it might react as below . • T ransition Detector alarm shown below might appear on screen, if the projector has been moved ...

  • Hitachi CP-X206 - page 51

    51 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 4 .2 - 4 Move the cursor to the right side of the PA S S W O R D A G A I N bo x a n d p r e s s t h e ► button to display the P ASSWORD for about 20 seconds, please make note of the P ASSWORD during this time. Pressing the ENTER button will return to the TRANSITION DETEC ...

  • Hitachi CP-X206 - page 52

    52 Item Description SECURITY (continued) 5. Using the MY TEXT P ASSWORD function This item allows you to display your own message (MY TEXT) on the ST ART UP screen and INPUT -INFORMA TION. It can be protected by a password to prevent it from being overwritten. 5.1 Writing the MY TEXT (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY ...

  • Hitachi CP-X206 - page 53

    53 Item Description SECURITY (continued) 5.3 T urning on the MY TEXT P ASSWORD The MY TEXT P ASSWORD function can prevent the MY TEXT from being overwritten. 5.3-1 T urning on the MY TEXT P ASSWORD function (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT P ASSWORD menu and press the ► button to display the MY TEXT P ASSWORD ...

  • Hitachi CP-X206 - page 54

    54 Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. From the NETWORK menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ►cu ...

  • Hitachi CP-X206 - page 55

    55 NETWORK Menu NETWORK Menu (continued) Item Description SETUP (continued) IP ADDRESS Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF . • The IP ADDRESS is the number that identies this projector on the network. Y ou cannot have two devices with the same IP ADDRESS on the same ne ...

  • Hitachi CP-X206 - page 56

    56 NETWORK Menu NETWORK Menu (continued) Item Description PROJECTOR NAME (1) Use the▲/▼ buttons on the NETWORK Menu to select the PROJECT OR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the rst 3 lines. If not yet written, the lines will be blank. Use the ...

  • Hitachi CP-X206 - page 57

    57 NETWORK Menu NETWORK Menu (continued) Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. The application software “PJImage” is required to store image(s) into the projector . Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE (  MY IMAGE (Still Image T ransfer) Display of the User ’s ...

  • Hitachi CP-X206 - page 58

    58 NETWORK Menu NETWORK Menu (continued) Item Description INFORMA TION Selecting this item displays the NETWORK -INFORMA TION- dialog for conrming the network settings. • The PROJECT OR NAME is displayed in the “PROJECTOR NAME” field. Nothing (blank) is shown in the “PROJECTOR NAME” field until you setup the item (  56 ). • When t ...

  • Hitachi CP-X206 - page 59

    59 C.C . (Closed Caption) menu The closed caption setting can be changed through C.C. menu in the advance menu. Please select the item that you will change using ▲/▼ cursor buttons. • The C.C. (Closed Caption) is the function that displays a transcript or dialog of the audio portion of a video, les or other presentation or other relevant s ...

  • Hitachi CP-X206 - page 60

    60 Maintenance Maintenance A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new ...

  • Hitachi CP-X206 - page 61

    61 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSU RE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn ...

  • Hitachi CP-X206 - page 62

    62 Maintenance The air lter unit of this projector consists of a lter cover , two kinds of lters, and a lter frame. The new double large lters system is expected to function longer . However , please check and clean it periodically to keep ventilation needed for normal operation of the projector . When the indicators or a message pro ...

  • Hitachi CP-X206 - page 63

    63 Maintenance Cleaning and replacing the air lter (continued) 9. T urn the projector on and reset the lter time using the FIL TER TIME item in the EASY MENU. ►Before taking care of the air lter , make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufciently . T aking care of the ...

  • Hitachi CP-X206 - page 64

    64 Maintenance 1. T urn the projector off, and unplug the power cord. Allow the projector to cool sufciently . 2 . After making sure that the projector has cooled adequately , pull the slot cover forward, pushing slightly its edge up, and remove it from the projector . 3 . Remove the battery case. Hold the battery case gutter by nger nail or ...

  • Hitachi CP-X206 - page 65

    65 Maintenance Other care In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . 1. T urn the projector off, and unplug the power cord. Allow the projector to cool sufciently . 2. After making sure that the projector is cool adequately , lightly wipe the lens with a commerc ...

  • Hitachi CP-X206 - page 66

    66 T r oubleshooting T roubleshooting If an abnormal operation should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company . They will tell you ...

  • Hitachi CP-X206 - page 67

    67 T r oubleshooting R e gar ding the indicator lamps When operation of the LAMP , TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lighting In Orange T urned off T urned off The projector is in a standby state. Please refer to the sectio ...

  • Hitachi CP-X206 - page 68

    68 T r oubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned of f. In such a case, discon nect the power cord, and wait at least 45 minutes. After the projector has sufciently cooled dow ...

  • Hitachi CP-X206 - page 69

    69 T r oubleshooting Phenomena that may be easy to be mistak en for mac hine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power cord is not plugged in. Correctly connect the p ...

  • Hitachi CP-X206 - page 70

    70 T r oubleshooting Pheno mena tha t may be easy to b e mi stak en fo r ma chin e def ects (co ntinu ed) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 10 The MUTE function is working. Restore the sound pressing MUTE or VOLUM ...

  • Hitachi CP-X206 - page 71

    71 T r oubleshooting • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. NO TE Pheno mena tha t may be easy to b e mi stak en fo r ma chin e def ects (co ntinu ed) Phenomenon Cases not involving a machine defect Reference ...

  • Hitachi CP-X206 - page 72

    72 Specications Specications Specication Item Specication Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens, <CP-X206> F=1.7 ~ 1.9 f = 18.9~ 22.6 mm <CP-X306> F=1.7 ~ 1.9 f = 19.5~ 23.4 ...

  • Hitachi CP-X206 - page 73

    73 Specications Specications (continued) [unit: mm] 340 129 1 1 7 270 BATTERY ...

Manufacturer Hitachi Category Projector

Documents that we receive from a manufacturer of a Hitachi CP-X206 can be divided into several groups. They are, among others:
- Hitachi technical drawings
- CP-X206 manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi CP-X206
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi CP-X206.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi CP-X206, service manual, brief instructions and user manuals Hitachi CP-X206. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi CP-X206.

Similar manuals

A complete manual for the device Hitachi CP-X206, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi CP-X206 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi CP-X206.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi CP-X206 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi CP-X206, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi CP-X206, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi CP-X206 - which should help us in our first steps of using Hitachi CP-X206
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi CP-X206
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi CP-X206 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi CP-X206?

Use the form below

If you did not solve your problem by using a manual Hitachi CP-X206, ask a question using the form below. If a user had a similar problem with Hitachi CP-X206 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)