English dropdown-ico

Manual Epson GQ-3500

13 pages 0.4 mb
Download

Go to site of 13

Summary
  • Epson GQ-3500 - page 1

    EPSON ® Serial Interface for the GQ-3500 Printed in Japan m 88.11-5 Y59099101000 ...

  • Epson GQ-3500 - page 2

    Serial Interface The serial interface is an option for your CQ-3500 printer. These pages tell you how to install and use the serial interface. The GQ-3500 serial interface is actually two interfaces in one. It can be used as either an RS-232C interface (the factory setting) or an RS-422 interface, depending on the settings of the jumpers on the cir ...

  • Epson GQ-3500 - page 3

    3. 4. 5. 6. For RS422 operation, set the jumpers at Jl and J2 as follows . At Jl, move REV, RD, and SRI to the right. At J2, set all jumpers in the installed position, except for TR+ and TR-. Jumpers that were not given a especific setting above do not need to be changed to select RS-232C or RS-422 operation (although they may affect how the interf ...

  • Epson GQ-3500 - page 4

    3. 4. Configure the jumpers on the serial interface card as described above. Remove the parallel interface from the back of the printer by loosening the two Knobs and pulling its straight out as shown in Figure 1. Store the parallel in the box that the serial interface came in Figure 1. Removing the interface 5. Slide the serial interface into the ...

  • Epson GQ-3500 - page 5

    The Serial Interface DIP Switches On the right side of the serial interface are two banks of DIP switches, as shown in Figure 2. Group 4 is on the left and 5 is on the right.) switches control many of the of the interface ,as detailed in Table 1. settings. You can use a ballpoint pen to change the switch Because DIP switch groups 1 and 2 are the sa ...

  • Epson GQ-3500 - page 6

    Table 1. Serial interface DIP switches Serial Interface 5 ...

  • Epson GQ-3500 - page 7

    Setting the data trader rate The following table shows the DIP switch settings for the various possible data transfer (baud) rates Table2. Baud rate settings The Serial Interface Jumpers The following tables describe the functions of the jumpers on the serialinterface. The main function of these jumpers is to switch between RS-232 C and RS-422 oper ...

  • Epson GQ-3500 - page 8

    The jumpers at Jl The jumpers at J1 are two position jumpers. The small plugs can be moved from the left two wires to the right two wires to change the settings. Table 3 describes the functions of the jumpers at Jl. When delivered from the factory, all jumpers are in the left position. Table3. Functions of the jumpers at J1 Serial Interface 7 ...

  • Epson GQ-3500 - page 9

    The jumpers at J2 Jumpers at J2 are single position jumpers; they can be either installed or disconnected. To change the settigs of these jumpers you must put a jumper plug across the two pins. To disconnect a jumper plug, simply move the plug so that it rests on the left pin only, leaving the right pin open. (All plugs are in this position when th ...

  • Epson GQ-3500 - page 10

    The GQ-3500 has a buffer that will hold up to 102 characters, including the ETX code at the end of the group. The computer can send the first group of characters and then stop until the first ACK is received. From then on,every time an ACK is received, another group of characters can be sent. DlP switch 5-2 controls ETX/ACK protocol. If DIP switch ...

  • Epson GQ-3500 - page 11

    1. When the input buffer becomes nearly full (within 128 bytes) 2 When the pinter goes off line (by pressing the ON LINE button) 3. When the printer runs out of paper 4. When the printer runs out of toner 5. When an error is detected. when the DTR signal goes low, the computer musts stop sending data within 128 characters The signal goes back high ...

  • Epson GQ-3500 - page 12

    Table5. Pins and signals Serial Interface 11 ...

  • Epson GQ-3500 - page 13

    Table 5. Continued 12 Serial Interface ...

Manufacturer Epson Category Network Card

Documents that we receive from a manufacturer of a Epson GQ-3500 can be divided into several groups. They are, among others:
- Epson technical drawings
- GQ-3500 manuals
- Epson product data sheets
- information booklets
- or energy labels Epson GQ-3500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Epson GQ-3500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Epson GQ-3500, service manual, brief instructions and user manuals Epson GQ-3500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Epson GQ-3500.

Similar manuals

A complete manual for the device Epson GQ-3500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Epson GQ-3500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Epson GQ-3500.

A complete Epson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Epson GQ-3500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Epson GQ-3500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Epson GQ-3500, that we can find in the current document
3. Tips how to use the basic functions of the device Epson GQ-3500 - which should help us in our first steps of using Epson GQ-3500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Epson GQ-3500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Epson GQ-3500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Epson GQ-3500?

Use the form below

If you did not solve your problem by using a manual Epson GQ-3500, ask a question using the form below. If a user had a similar problem with Epson GQ-3500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)