English dropdown-ico

Manual Perle Systems 1700

100 pages 1.7 mb
Download

Go to site of 100

Summary
  • Perle Systems 1700 - page 1

    Perle 1700 Series Perle 1700 Series Perle 1700 Series Perle 1700 Series Bridge / Routers User And System Administration Guide Part number 5500071-14 © Copyright 2002 by Perle Systems Ltd. ...

  • Perle Systems 1700 - page 2

    Federal Communicati ons Commission (FCC) Note: Thi s equip ment has been tes ted and foun d to compl y with the limits for a Cl ass A digita l devic e, purs uant to Part 15 of t he FCC Rules. These limits are d esigned to provide re asonable protect ion against harmf ul interf erence w hen the e quipment is operated in a com mercia l environment . ...

  • Perle Systems 1700 - page 3

    Using This Manual This Ins tallation and Applications Guide provides the basic information required to initially set-up and configure the P1730 & PRO Bridge/Router. T his guide is organized into the following sections : “ Installation ” provides instructions for ins talling the P1730 & P1705. “ Typical Applications & How to Config ...

  • Perle Systems 1700 - page 4

    Contents 1 INSTALLATION 1 Unpack the Router................................................................................................. 1 Select a Site ............................................................................................................. 1 Identify the Reset Switch ....................................................... ...

  • Perle Systems 1700 - page 5

    Contents Configure Remote Site Profiles ............................................................................ 38 Configure Remote Site Profiles for ISDN PPP ........................................................ 39 Configure Remote Site Profile for Frame Relay ....................................................... 41 Configure Remote Site ...

  • Perle Systems 1700 - page 6

    Contents Processor settings for the I SDN Link Modules ................................................ 79 Changing the Termination Straps on the ISDN S/T I nterface ...................... 80 Connecting to the ISDN-U Link Module .......................................................... 80 Performing a Software Upgrade ............................. ...

  • Perle Systems 1700 - page 7

    1 1 Installation The P1705 & P1730 are flexible Ethernet Bridge/Routers that may be configured to service Local Area Networks and Wide Area Network connections over leased lines , ISDN circuits, and frame relay permanent virtual circuits. The P1705 s upports a single LAN and one or two WAN links (one ISDN BRI interface or two other WAN modules) ...

  • Perle Systems 1700 - page 8

    Applications 2 Identify the Reset Switch The small hole under the front right cor ner of the f aceplate is used in case a hard ware reset is required. The end of a paper clip is suff icient to toggle the s mall switch behind the hole. Front Vi e w Bottom Vi e w RES ET Figure 1-1 Location of the Reset Hole on Router ...

  • Perle Systems 1700 - page 9

    Applications 3 Identify the Connectors P1705 The P1705 may be ordered with a 10Base2, 10B ase5, or 10BaseT LAN interface. If this P1705 has an ISDN U or S/T Module, it must only be installed in the slot 1 (leftmost position when viewed f rom the rear of th e unit). The slot 2 pos ition may be unused and covered with a blank panel or may contain ano ...

  • Perle Systems 1700 - page 10

    Applications 4 CONS OLE 10/100 BT LAN MDI- X MDI LAN/ Con sol e mod ule Powe r c onnect or RS-232/V .24 LAN 2 mo d u l e Li n k 2 mo d u l e 10 BT L AN MDI- X MDI Figure 1-4 Rear View of the P1730 with Dual LAN connections and a single WAN module Connect to the Console Connection to the bridge/router operator’s console is made through the DB25 co ...

  • Perle Systems 1700 - page 11

    Applications 5 Power Up the Bridge/Router Once the LAN and Link connections are made and the console is connect ed to a terminal, you are ready to power-up the router. Connect the AC power cord to the back of the router and plug the cord into th e AC wall outlet. Observe the LEDs as the bridge/router powers up. T he LEDs will go through a circular ...

  • Perle Systems 1700 - page 12

    Applications 6 Conventions Throughout this section, P1705 & P1730 menu options are s hown that are required for the various configuration choices. The appropriate menu options are shown in each instance in the following for mat: Configuration Option Name Location: Main ª Sub-Menu Name ª Sub-Menu Name ª Option Name The configuration option is ...

  • Perle Systems 1700 - page 13

    Applications 7 Login to Bridge/Router and Enter the Required Configuration At the login screen type a 1 and the defa ult password to enter the me nu system of the Router. The default password is “BRIDGE” (case sensitive) and should be changed if security is desired. With the options of the built-in menu system, the router may be configured to o ...

  • Perle Systems 1700 - page 14

    Applications 8 Setting the T1/E1Parameters (T1/E1 WAN only) The parameters required for a T1 or E1 connection may be obtained from your service provider. These may then be entered via the T 1/E1 set-up menu to conf igure the rout er for that ser vice. T1/E1 Selection: Location: Main ª Configuration ª WAN Set Up ª Link Set Up ª T1/E1 Set U p ª ...

  • Perle Systems 1700 - page 15

    Applications 9 E1 service does not requir e line build out selection. Set Link Interface Type: Location: Main ª Configuration ª WAN Set Up ª Link Set Up ª T1/E1 Set U p ª LBO as specifed T1 long-haul LBOs: L0db, L7.5db, L15db, L22.5db Short haul LBOs: S0to110ft, S110to220ft, S220to330ft, S330to440ft, S440to550ft, S550to660ft AT&T standard ...

  • Perle Systems 1700 - page 16

    Applications 10 Mandatory Configuration The P1705 & P1730 requires a minimum amount of mandatory configuration in order to operate. The following table identifies the configuration parameters that must be defined for proper operation under the operational states shown in the table. Bridge IP Router IPX Router none IP Address none ISDN - U ISDN ...

  • Perle Systems 1700 - page 17

    Applications 11 Identify the Status LEDs The four three colour Light Emitting Diodes (LEDs) on th e front of th e router are depicted in Figure 1-1. The meanings of these LEDs are found in the fo llowing chart. Off Bridge/Router is powered down Green Bridge/Router is running and has passed power-up diagnostics Green (flashing) Bridge/Router is in B ...

  • Perle Systems 1700 - page 18

    12 2 Typical Applications & How to Configure Them The P1705 & P1730 are flexible Ethernet Bridge/Routers . This section will des cribe how to set-up the P1705 & P1730 routers using each of its networking functions. Note that depending on the model of unit and what interface modules are installed, some of the configuration examples may n ...

  • Perle Systems 1700 - page 19

    Applications 13 Bridging and Routing Should You Bridge or Ro ute? When connecting two networks together, the first question to ask is “should I bridge or route”? The decision to bridge or to route may be decided by how the existing networks have been already set-up. Bridging should be used when the network consists of non-routable protocols or ...

  • Perle Systems 1700 - page 20

    Applications 14 Bridging An Ethernet bridge intelligently forwards Ethernet data packet traffic between connected networks. The traffic may be across the Wide Area Network (illustrated below) or, in the case of the P1730, may be between two LANs connected to the same P1730. Figure 2 -1 Networks Bridged across a W AN link Ethernet bridges simply for ...

  • Perle Systems 1700 - page 21

    Applications 15 IP Routing An Ethernet IP router is used to intelligently route Internet Protocol (IP) traffic to another network. The networks may be connected across a WAN link (illus trated below) or two LANs connected to the same dual LAN P1730. Figure 2 -2 IP Networks Routed across a W AN link IP routers forward IP frames based upon their IP d ...

  • Perle Systems 1700 - page 22

    Applications 16 IP Addressing Devices on an IP network are located by their IP addresses, which is a 32 bit number divided into four 8 bit fields. The IP address identifies both the network and the host device (also known as a node) on that network. The address is usually written as the four decimal values for the fields (between 0 and 255) separat ...

  • Perle Systems 1700 - page 23

    Applications 17 Masks The portion of the IP address to use as the network address is specif ied by using a mask; a mask is the contiguous number of bits to be used for the network address all set to 1. When the mask is logically ANDed with an IP addres s, the resu lt is the network addr ess. The mas k is specified by ent ering the mask s ize as the ...

  • Perle Systems 1700 - page 24

    Applications 18 The P1705 & P1730 allows mask sizes from 8 to 32 bits. The subnet mask size determines how many bits of the host field of the original IP network addres s will be used for the creation of subnets. In this example, specifying a mask size of 26 will produce a subnet s ize of 2 bits. Two bits gives 4 possible sub-network addresses ...

  • Perle Systems 1700 - page 25

    Applications 19 IP Default Gateway An IP default gate way is an IP router tha t is resident on the local IP network that this router is connect ed to and is used to r oute IP fr ames fo r dest ination networks that do not exist in the routing table. When an IP frame is r eceived that is dest ined for a network t hat is not listed in the routing tab ...

  • Perle Systems 1700 - page 26

    Applications 20 IPX Routing The P1705 & P1730 are pre-configured to operate as an IPX router. When ins talled in an IPX network, the router will learn the IPX network numbers from connected networks. It will then route the IPX frames to the appropriate destination I PX network. The IPX routing scenario may consist of one of the two following co ...

  • Perle Systems 1700 - page 27

    Applications 21 to the IPX frames they r eceive from the networ k. Manual entr ies may be made in the routing tables by adding s tatic IPX r outes . Novell Servers in One Location Only Some Novell LAN installations require that a remote LAN that consis ts of only Novell IPX clients be connected to a central LAN th at contains the Novell s ervers an ...

  • Perle Systems 1700 - page 28

    Applications 22 The following st eps must be perfor med on the router connect ed to LAN #2. IPX Routing Disabled Location: Main ª Configuration ª IPX Routing Set-up ª IPX Routing Disabling IPX routing allows the IP X frame types to be modified. Configuration: IPX Routing does not need to be disabled in order to change the defined Note network nu ...

  • Perle Systems 1700 - page 29

    Applications 23 IPX Forwar ding Enabled Location: Main ª Configuration ª IPX Routing Set-up ª IPX Forwarding IPX forwarding must be re-enabled to allow the router to forward IPX frames onto t he WAN to the partner router I PX routers . The IPX Forwar ding function enables or dis ables the forwarding of IPX traffic when IPX routing is enabled. W ...

  • Perle Systems 1700 - page 30

    Applications 24 PPP Overvie w Point to Point Protocol (PPP) is a connection protocol tha t allows control over the set-up and monitoring of network communications. It is used in procedures for user authentication (name and password), connection management (spoofing, bandwidth on demand, multilink), and compression. I f any these funct ions are requ ...

  • Perle Systems 1700 - page 31

    Applications 25 Unnumbered Links An unnumbered link does not use network addressing on the WAN link. The WAN connection is roughly equivalent to an internal connection with each of the two end point routers oper ating as half of a complet e router that is connected between t he two endpoint LANs. When an IPCP link is set to unnumbered, the only con ...

  • Perle Systems 1700 - page 32

    Applications 26 Multilink Operation Multilink operation defines the use of more than one link to connect between two PPP routers. The MultiLink Operation option of the remote site profile for a connection is enabled by default. When a Multilink connection is established, the Multilink (MP) options within the PPP set- up and Advanced PPP set-up menu ...

  • Perle Systems 1700 - page 33

    Applications 27 Basic WAN Configurations Basic ISDN Connections If this P1705 & P1730 are configured as an I SDN bridge/router, it may establis h WAN connections to other bridge/routers via ISDN (Integrated Services Digital Network) connections. Before the P1705 & P1730 can establish an ISDN connection to another ISDN router, the ISDN infor ...

  • Perle Systems 1700 - page 34

    Applications 28 The following steps mus t be performed to configure the P1705 & P1730: The default switch type for ISDN S/T interface modules is NET3, the default switch type for ISDN U interface modules is NI-1. If the type of service your provider uses mat ches the default setting fo r the interface module, t he following s tep may be skipped ...

  • Perle Systems 1700 - page 35

    Applications 29 Once the ISDN switch type and directory numbers have been configured, t he router mus t be reset for the new values to t ake effect and for the ISDN BR I interface t o register with the central switch. Soft Reset Location: Main ª Diagnostics ª Soft Reset Once the router has restarted it is ready to establis h ISDN connections. Wit ...

  • Perle Systems 1700 - page 36

    Applications 30 PPP ISDN Manual Call Quick Connections The PPP P1705 & P1730 should be configured with a remote site profile entry for each router that will be called (see section 2.3.1). A manual direct dial connection may be performed to establish an initial connection to a remote site router. Once the connection is established and working pr ...

  • Perle Systems 1700 - page 37

    Applications 31 IPX Router Manual Ca ll Connection To establish an IPX PPP direct dia l connection, enter the ISDN phone number of the remote site PPP router in the manual dial option. Refe r to the Configure as an E thernet IPX Router section 2.3.1 for more information on I PX configuration required. M anual Call Location: Main ª Configuration ª ...

  • Perle Systems 1700 - page 38

    Applications 32 Basic Frame Relay Configuration North American P1705 & P1730 with at least one non-ISDN interface are configured to have frame relay enabled for that interface by default. P1705 & P1730 shipped outside of North America with at least one non-ISDN interface will have frame relay disabled on that interface as a def ault setting ...

  • Perle Systems 1700 - page 39

    Applications 33 Configuration: The default configuration for P1705 & P1730 s hipped outside North America is to hav e frame relay dis abled. To run frame r elay on these routers, it mus t first be enabled. Selec ting the Frame Relay option will toggle the setting from disabled to enabled.     Frame Relay enable Location: Main ª Con ...

  • Perle Systems 1700 - page 40

    Applications 34 If during this learning pr ocess the max imum number of remote sites has been reached, the router will prompt you that there ar e no remote sites av ailable. A new remote site cannot be auto- created unless one of the existing remote sites is manually deleted. Auto-learning with PPP encaps ulation enabled (see following page) may no ...

  • Perle Systems 1700 - page 41

    Applications 35 Quick Start Frame R elay Since the P1705 & P1730 auto-learns the frame relay configuration, only a couple of parameters need to be configured before the unit is fully operational as an IP router for frame relay. Upon initial start up, the P1705 & P1730 are pre-configured to query the frame relay service to auto-learn the LMI ...

  • Perle Systems 1700 - page 42

    Applications 36 Basic Leased Line Configuration The P1705 & P1730 establishes PPP (Point to Point Protocol) WAN connections to other PPP Leased Line route rs or to other vendors PPP leased line route rs via direct leased line connections. Eithe r 1 or 2 links may be used to connec t to other PPP routers. Configuration: The default configuration ...

  • Perle Systems 1700 - page 43

    Applications 37 The following steps must be performed on each of the routers in the network. Local IP Address Location: Main ª Configuration ª LAN Set-up ª LAN IP Set-up ª IP Address / mask siz e This is the IP address and subnet mask for the link of this router in the unnumbered IP connection. Usually the clocking signal is received from th e ...

  • Perle Systems 1700 - page 44

    Applications 38 Configure Remote S ite Profiles Remote Site Profiles allow the router to have different sets of configuration parameters for each of the remote site routers t hat may be called or that may call t his router . This allows complete control over the configuration of each possible connection. Each remote site profile is assigned an iden ...

  • Perle Systems 1700 - page 45

    Applications 39 Configure Remote Site Prof iles for ISDN P PP If this router is conf igured to have at least one ISDN switched circuit, t he ISDN call parameters must be defined so that the router knows what ISDN phone number to dial when a connection to this remote site is required and what secur ity parameters to use when establishing a connectio ...

  • Perle Systems 1700 - page 46

    Applications 40 1 b) Defining this remote site profile within the IP Address connect table, which will cause a call to be made when a packet fo r this IP address is routed, Location: Main ª Configuration ª WAN Set up ª IP Address Connect ª IP Address Connect Enabled 1 c ) Defining the Auto-Ca ll option within the Edit Remote Site menu of this r ...

  • Perle Systems 1700 - page 47

    Applications 41 Configure Remote Site Pr ofile for Frame Relay Each of the PVC’s on t he frame relay ser vice must be conf igured within an individual remote site profile on the route r. This is usually done automatically through the auto- learning process. When the frame relay router first starts up it will query the frame relay service to tr y ...

  • Perle Systems 1700 - page 48

    Applications 42 The DLCI number defined here is the Data Link Connection Identifier value provided by your frame r elay service provider. T his value must be set if auto-learning is disabled. Each Remote Site PVC must be defined to exist on one of the two physical WAN links available on this router. Primary Link Location: Main ª Configuration ª W ...

  • Perle Systems 1700 - page 49

    Applications 43 EIR Location: Main ª Configuration ª WAN Set up ª Remote Site Set-up ª Edit Remote Site ª Connection Set-up ª EIR The EIR value specifies the indicated data rat e that may be available for t his PVC. This value must be set to the sa me as the value provided by the Frame Relay network provider. When EIR = 0, no excess burst dat ...

  • Perle Systems 1700 - page 50

    Applications 44 Configure Remote Site Profiles for Leased Line PPP Remote Site Profiles allow the router to have different sets of configuration parameters for each of the possible remote site PPP routers that ma y be connecte d to this router. This allows greater c ontrol over the configuration of eac h possible PPP connection. Each remote site pr ...

  • Perle Systems 1700 - page 51

    Applications 45 Now that the remote s ite profile is cr eated, a link number must be as signed as the primary link number. The primary link number is the link interface that the router will us e to attempt to establish a connection to the remote site PPP router. Primary Link Number Location: Main ª Configuration ª WAN Set up ª Remote Site Set-up ...

  • Perle Systems 1700 - page 52

    Applications 46 Configure Remote Site P rofiles for Frame Relay with ISDN backup Frame Relay operation is set-up as described in s ection 2.3.2 The PVC on both partner router s must be dis abled during this set-up procedure, then r e-enabled when ready to st art. ISDN call set-up is done as des cribed in section 2.3.1. Recovery operation is set-up ...

  • Perle Systems 1700 - page 53

    Applications 47 Configure Remot e Site Profi les for PPPo E Remote Site Profiles a llow for the router to be configure d to support PPP over Ethernet (PPPoE) client on the route r. The PPPoE feature on the Perle routers provide a PPPoE client support on Ethernet interfaces to a bridging DSL modem to the Internet. This feature will create a PPP tunn ...

  • Perle Systems 1700 - page 54

    Applications 48 Location: Main ª Configuration ª WAN Set-up ª Remote Site Set-Up ª Edit Remote Site ª Protocol Set-Up ª IP Set-up ª NAT enabled ª enabl ed Access to some web page s is a common problem expe rienced when running a PPPoE client on a router. By design, PPPoE packets can support a maximum MTU of up 1492 bytes. Normally when a co ...

  • Perle Systems 1700 - page 55

    Applications 49 Normally your ISP provider will provide you with an outgoing username and password and to authentica te with their service s. The PPPoE remote site configuration needs to have the security sec tion configured with this ISP para meters to authentica te the PPPoE connec tion. Location: Main ª Configuration ª WAN Set-Up ª Remote Sit ...

  • Perle Systems 1700 - page 56

    Applications 50 Advanced Features Configure Dynamic Host Configuration Protocol The P1705 & P1730 use Dynamic Host Configuration Protocol (DHCP) to allow users in a small office environment to be added and removed from a network with all of the network information (i.e. IP address, DNS, subnet mask, etc.) being configured automatically. DHC P c ...

  • Perle Systems 1700 - page 57

    Applications 51 DNS Set-Up Location: Main ª Configuration ª Application Set-up ª DHCP Set-up ª DNS Set-up ª Primary DNS -IP address local DNS server ª Secondary DNS -IP address external DNS server Figure 2 -10 Local + External DNS Ser ver Configuration The configuration options described her e are only for initial set-up and c onfiguration pu ...

  • Perle Systems 1700 - page 58

    Applications 52 Network Address Translation and Port T ranslation The P1705 & P1730 provide support for Network Address T ranslation (NAT ). Network Address T ranslation is a technique that trans lates privat e IP addr ess on a pr ivate networ k to valid global IP addresses for a ccess to the Inte rnet. Network Address Port Transla tion (NAPT) ...

  • Perle Systems 1700 - page 59

    Applications 53 Figure 2 -11 NA PT Configuration Int erne t Se rvic e Prov ider Pri vat e Networ k Addresse s: Global IP Addres s: 199.87. 65. 43 NAPT mapping : 1.1. 1.2 = 199 .87. 65.43 ( 25) 1.1. 1.3 = 199 .87. 65.43 ( 23) 1.1. 1.4 = 199 .87. 65.43 ( 80) e-mail server 1.1. 1.2 tel net server 1.1. 1.3 WWW server 1.1. 1.4 1.1. 1.6 1.1. 1.8 ...

  • Perle Systems 1700 - page 60

    Applications 54 Security The router provides a number of means of providing security on incoming and outgoing traffic on a net work. These methods include access pass word auth entication, f irewall limiting access to only designa ted devic e addresses, private netw ork address tran slation (NAT) and filtering for both incoming and outgoing traffic ...

  • Perle Systems 1700 - page 61

    Applications 55 Remote Site S ecurity P arameters Entry Location: Main ª Configuration ª WAN Set up ª Edit Remote Site ª Security Pa rameters ª Outgoing User Name ª Incoming PAP Password ª Outgoing PAP Password or ª Incoming CHAP Secret ª Outgoing CHAP Secret The outgoing entries in the securit y database define t he user names and passwor ...

  • Perle Systems 1700 - page 62

    Applications 56 Configure Fi rewall The P1705 & P1730 pr ovide Firewall security f or restr icting access between any two networks connected through the router. Firewalls are set-up on a per connection basis for the LAN and remote sites. The direction of filter ing is from the per spective of the r outer; incoming traffic is from the network in ...

  • Perle Systems 1700 - page 63

    Applications 57 First the firewall on the I SP connection (remot e site 1) of the WAN is set-up. Th e firewall option is set to “inbound” to have this WAN firewall filter traffic from the ISP to the router while allowing unres tricted access out to the I nternet. Firewall Location: Main ª Configuration ª Applications Set-up ª Firewall Set-up ...

  • Perle Systems 1700 - page 64

    Applications 58 Then an entry is placed in the firewall t able to allow the devices in the br anch office remote site to have unlimited T CP access to devices in the head office. Firewall Table E ntry Location: Main ª Configuration ª Applications Set-up ª Firewall Set-up ª LAN Firewall Set-up ª Edit Firewall Entry ª filter ID # 1 ª Destinati ...

  • Perle Systems 1700 - page 65

    Applications 59 Network Address Translat ion Using private addresses on a network and NAT/NAPT for interactions over an internetwork connection hides the internal address fr om the rest of the world. Access is restri cted to only those s ervices th at are specif ically designated to be available. Pl ease see section 2.4.2 for more information on Ne ...

  • Perle Systems 1700 - page 66

    Applications 60 Bandwidth On Demand The router may be set to act ivate its secondar y link when the load on the primary link exceeds a user- defined threshold. Set the traf fic loads for enabling and disabling the secondary cir cuit Location: Main ª Configuration ª WAN Set up ª Remote Site Set-up ª Edit Remote Site ª Activation Set-up ª Thres ...

  • Perle Systems 1700 - page 67

    Applications 61 QOS - Priority Queuing Priority Queuing (P Q) allows the us ers to configur e the router to allow specific traff ic bound for an outgoing interface to be prioritized into high, medium, normal and low queues. Packets s ent to the high prior ity queue are serviced f irst, followed by the packet s on the medium queue and so on. The rou ...

  • Perle Systems 1700 - page 68

    Applications 62 To assign a Pri ority List to a LAN i nterface     Location: Main ª Configuration ª Lan Set-up ª QOS Set-up ª Queuing Strategy ª Priority ª Priority List Number To assign a Pri ority List to a Remote Site Connec tion     Location: Main ª Configuration ª Wan Set-up ª Remote Site Set-up ª Edit Remote ...

  • Perle Systems 1700 - page 69

    Applications 63 Simple Network Time Protocol (SNTP ) The Simple Network Time Protocol (SNTP) feature on the Perle Routers support the client side of the protocol as described in RFC 2030. The router will be able to obtain its time from a NTP or SNTP server and then can be synchronized amongst other network devices. Additionally, the router can also ...

  • Perle Systems 1700 - page 70

    Applications 64 ª IP Address (XXX.XXX.XXX.XXX) ª Secondary IP Addres s ª IP Address (XXX.XXX.XXX.XXX) ª Version ª 3 The time zone and daylight savings time configuration is setup within the device setup menu. To configure for Eastern Standard Time (EST) and have daylight saving time implemented for this year only, implement the following st ep ...

  • Perle Systems 1700 - page 71

    Introdu ction to F iltering 65 3 Introduction to Filtering The P1705 & P1730 provide programmable filtering which gives you the ability to control under what conditions Ethernet frames are forwarded from one network to another. There are many reasons why t his might need to be accomplished, some of which are s ecurity, protocol discrimination, ...

  • Perle Systems 1700 - page 72

    Introdu ction to F iltering 66 Pattern Filtering Pattern filtering is provided in three separate sections: Bridge Pattern Filters, IP Ro uter Pattern Filters , and IPX Rout er Pattern Filt ers. When the r outer is operat ing as an IP/I PX Bridge/Router , each of the frames received is pass ed on to the appropr iate internal section of the router. T ...

  • Perle Systems 1700 - page 73

    Introdu ction to F iltering 67 Example: ~12-80 This filter pattern will match if the packet information starting at the 12th octet does not equal the 80 of the filt er pattern. ( ) brackets Used in pattern filters to separate portions of filter patterns for specific operators. Example: 12-80&(14-24|14-32) This filter pattern will be checked in ...

  • Perle Systems 1700 - page 74

    Introdu ction to F iltering 68 Banyan Banyan (12-0BAD) (12-80C4) (12-80C5) IP Router IP router pattern filters are applied to I P Ethernet frames th at are being routed. When t he router is operating as an IP router, all I P routed frames will be checked against the defined IP rout er pattern f ilters. IP routed fr ames are unaffect ed by t he brid ...

  • Perle Systems 1700 - page 75

    69 Appendix A Menu Trees The menu trees on the following pages are a graphical r epresentation of t he hierarchy of th e built-in menu system of the P1705 & P1730. Each of the menus are shown with the options of the menus being displayed below the sp ecific menu name. Each of the menu options shown in each of the menu trees is explained in the ...

  • Perle Systems 1700 - page 76

    1 Confi gur at ion 1. T ermi nal 2. S how 3. A dd 4. Remov e 1. T ermi nal Set -Up men u 2. Devi ce Se t- Up me nu 3. T el net Set- U p menu 4. Loa d FL AS H S et-U p me nu 5. Conso le 6. Har dware Stat us 7. TFTP access Acces s Set-Up 1] 1] 1] 2] 2] 3] 4] 5] 1. P asswor d 2. Devi ce Name 3. Show T i me 4. S et T i me 5. Time Zone 6. S ummer T ime ...

  • Perle Systems 1700 - page 77

    C on ti nue d f ro m pre viou s pa ge 1. Destinat ion 2. Sta tus 3. R emot e site 2. Ne x t hop 3. Type 4. Co st 5. P ri vat e 6. A dd/R em ove 8. Sta tus 7. Network mask Edit Static Route 1. IP Ro utes m enu 1. Ed i t St ati c R oute 2. D efault Gatew ay 3. Sho w all Rout es 4. S how Stati c R oute s 5. Cl ea r Stati c Rou t es 2. A RP Set -up m e ...

  • Perle Systems 1700 - page 78

    72 Appendix B Octet Locations on Ethernet Frames This appendix provides octet locations for the various portions of three of the common Ethernet frames. When creating pattern filters these diagrams will ass ist in the correct definition of the patterns. The offset numbers are indicated by the numbers above the frame repres entations. Note the diffe ...

  • Perle Systems 1700 - page 79

    Configuration Pages 73 Octet Locations on a Bridged Novell Netware Frame ETHERNET Type Codes Type Code Description 0800 DOD IP 0801 X.75 Internet 0804 Chaosnet 0805 X.25 Level 3 0806 A RP 0807 XNS Compatibility 6001 DEC MO P Dump/Load 6002 DEC MO P Remote Console 6003 DEC DECNET Phase IV Ro ute 6004 DEC LA T 6005 DEC Diagnostic Protocol 6006 DEC Cu ...

  • Perle Systems 1700 - page 80

    Octet Locations 74 Octet Locations on an IP Routed TCP/IP Frame Octet Locations on an IPX Routed Novell Netware Frame ...

  • Perle Systems 1700 - page 81

    Configuration Pages 75 Octet Locations on a Bridged XNS Frame ...

  • Perle Systems 1700 - page 82

    76 Appendix C Servicing Information Opening of the case and changing of modul es is only to be performed by qualified service per sonnel. WARNING ! A l w ays disconnect the pow er cord from the rear panel of the bridge/rout er. The bridge/router case does not need to be opened to change LAN or WAN interface modules. Opening the case 1) Remove power ...

  • Perle Systems 1700 - page 83

    Servicing Information 77 Identifying the Internal Components The major components of concern are shown in the following illustration. Link 2 Int e rf ace M odul e (IS DN BRI , DSU, G.70 3 , RS 232, V .35, RS422 o r V .1 1) Primary LAN & Console Interface Module Link 1 LAN 2 or Module (ISD N BRI , DSU, G.70 3 , RS23 2, V .3 5, RS422 o r V .1 1) ...

  • Perle Systems 1700 - page 84

    Servicing Information 78 To Clear a “Lost” Password 1) Remove power from the bridge/router. 2) Remove the screw securing the L AN / Console module to the rear of the bridge/router. Be sure to grip the module only by the flange a t the bottom of the metal panel. 3) Unplug the LAN / Console module approximately 1/2 inch from the bridge/router. Be ...

  • Perle Systems 1700 - page 85

    Servicing Information 79 Installing the ISDN Link Modules If there is an ISDN module plus another type of WAN interface module or if there is a single ISDN module, the ISDN U or S/T Module must only be installed in the Slot 1 position. The slot 2 position may contain another type of WAN module or may be unused and covered with a blank panel. For P1 ...

  • Perle Systems 1700 - page 86

    Servicing Information 80 Changing the Termination Straps on the ISDN S /T Interface The ISDN S/T link interface module has two configurable straps that control whether the ISDN LINE is set to terminate d or unterminated. Jumper str aps W5 and W6 are factor y installed to configur e the module as TERM INATED. The TERMI NATED position is used when th ...

  • Perle Systems 1700 - page 87

    Servicing Information 81 Performing a Software Upgrade 1) Execute the Network (TFTP) c ommand from the Load FLASH Set-Up menu. 2) Enter “none” to connect locally or enter the remote site ID number or alias to connect to a re mote site. 3) Start the TFTP application to be used for transfers to the router. (The IP address of the router may be fou ...

  • Perle Systems 1700 - page 88

    Servicing Information 82 In the following diagram of a clus ter of router s, when upgrading the t hree routers in the diagram, the upgrade order should be Rout er C, then Rout er B, and finally Router A. A TFTP software load to router C would be performed as follows: - Using TFTP , get config.txt fr om each router and save. - Telnet to Router C. En ...

  • Perle Systems 1700 - page 89

    Servicing Information 83 Appendix D Interface Pinouts Pinout Information Each link interface available is described with detailed information on pin des ignation. Standard interface cables will provide correct connections to modems, datasets, or DSU/CSUs. When connecting two bridge/routers back-to-back without modems, a null-modem cable is required ...

  • Perle Systems 1700 - page 90

    These modules may have either the UP/DOWN switch type or the ON/OFF slide switch type. Each type is illustrated below. CSU /DSU LIN E 1 2 3 4 Swit che s up down Figure D-1 Rear View of ATL-CSU/DSU Link Module with UP/DOWN Switches Figure D-2 View of ATL-CSU/DSU L ink Module with Sliding ON/OFF Switches When connecting two bridge/routers back-to-bac ...

  • Perle Systems 1700 - page 91

    Console Pinouts The connector shown here and pinouts described here correspond to the connector labeled “Console” on the back of the P1705 & P1730. DB25 Female DCE 13 1 25 14 Contact Number CCITT Circuit Number IEEE Circuit Desig. Circuit Name Direction To From DCE DCE 1 101 A A Protective Ground NA 2 103 BA Transmitt ed Data X 3 104 BB Rec ...

  • Perle Systems 1700 - page 92

    V.24 & RS232C Link Pi nouts The connector shown here and pinouts described here correspond to the connector labeled “RS232 / V.24” on the back of the P1705 & P1730. DB25 Female DTE 13 1 25 14 Contact Number CCITT Circuit Number Circuit Circuit Name Direction To From DCE DCE 1 101 A A Protective Ground NA 2 103 BA Transmitt ed Data X 3 1 ...

  • Perle Systems 1700 - page 93

    V.11/X.21 Link Pinouts The connector shown here and pinouts described here correspond to the connector labeled “V.11/x.21” on the back of the P1705 & P1730. DB15 Female DTE 1 8 9 15 Contact Number X.21 Circuits Reference Circuit Name Direction To From DCE DCE 1 Protective Gr ound NA 2 T (A ) Transmitted Data (A ) X 3 C (A ) Control (A ) X 4 ...

  • Perle Systems 1700 - page 94

    RS442 & RS530 Link Pi nouts The connector shown here and pinouts described here correspond to the connector labeled “RS530” on the back of the P1705 & P1730. DB25 Female DTE 13 1 25 14 Contact Number Circuit Circuit Name Direction To From DCE DCE 1 Shield Protec tive Ground NA 2 BA (A ) Transmitted Data X 3 BB (A ) Received Data X 4 CA ...

  • Perle Systems 1700 - page 95

    V.35 Link Pinouts The connector pinouts described here correspond to the connector labeled “V.35” on the back of the P1705 & P1730. 13 1 25 14 DB25 Contact Number M.34 Contact Number Circui t Name Direction To From DCE DCE 1 A Pr otective Ground NA 2 ---------- 3 ---------- 4 C Re quest to Send X 5 ---------- 6 E Data Set Rea dy X 7 B Signa ...

  • Perle Systems 1700 - page 96

    RS232 Null-Mode m Cable Confi gurati on Figure D-9 RS232 Null-Modem Cable The connecting cable must be a shielded cable. This cable is needed when it is necessary to connect t wo units back -to- back and a set of modems is not available. Not e that this cable specif ies DB25 connectors on each end to allow direct connection to the link int erf ace ...

  • Perle Systems 1700 - page 97

    V.35 Null-Modem Cable Configuratio n Prot ective GND T ransmitted Data (A) T ransmitted Data (B) Received Dat a (A) Received Dat a (B) T ransmit ter Signal Eleme nt Ti ming (A) T ransmit ter Signal Eleme nt Ti ming (B) Receiver Si gnal Element Tim ing (A) Receiver Si gnal Element Tim ing (B) T ransmit ter Signal Eleme nt Ti ming (A) T ransmit ter S ...

  • Perle Systems 1700 - page 98

    RS530 Null-Mode m Cable Confi gurati on Shiel d T ransmitted Data (A) T ransmitted Data (B) Received Data (A) Received Data (B) Request T o Send (A) Request T o Send (B) Clear T o Send (A) Clear T o Send (B) DCE Ready (A) DCE Ready (B) DTE Ready (A) DTE Ready (B) Signal Ground Received Line Si gnal Detector (A) Received Line Si gnal Detector (B) T ...

  • Perle Systems 1700 - page 99

    RS530 To RS449 Conversion Ca ble T ransmitted Data (A) Data T erminal Re ady (A) T ransmitted Data (B) Data T erminal Re ady (B) Received Data (A) Receiver Si gnal Eleme nt Timing (DCE So urce) (A) Received Data (B) Receiver Si gnal Eleme nt Timing (DCE So urce) (B) Received Li ne Signal Det ector (A) T ransmit Signal El ement Timi ng (DCE Source) ...

  • Perle Systems 1700 - page 100

    V.11/ X.21 Null-Modem Cable Configuration Figure D-13 V.1 1/X.21 Null-M odem Cable The connecting cable must be a shielded cable. Circuits which are paired (contain an (A) and (B) reference) s hould be connected to twisted pairs within the connecting cable. This cable is neede d whe n it is n ecess ary t o connect two un its b ack-to-b ack and a se ...

Manufacturer Perle Systems Category Network Router

Documents that we receive from a manufacturer of a Perle Systems 1700 can be divided into several groups. They are, among others:
- Perle Systems technical drawings
- 1700 manuals
- Perle Systems product data sheets
- information booklets
- or energy labels Perle Systems 1700
All of them are important, but the most important information from the point of view of use of the device are in the user manual Perle Systems 1700.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Perle Systems 1700, service manual, brief instructions and user manuals Perle Systems 1700. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Perle Systems 1700.

Similar manuals

A complete manual for the device Perle Systems 1700, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Perle Systems 1700 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Perle Systems 1700.

A complete Perle Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Perle Systems 1700 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Perle Systems 1700, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Perle Systems 1700, that we can find in the current document
3. Tips how to use the basic functions of the device Perle Systems 1700 - which should help us in our first steps of using Perle Systems 1700
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Perle Systems 1700
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Perle Systems 1700 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Perle Systems 1700?

Use the form below

If you did not solve your problem by using a manual Perle Systems 1700, ask a question using the form below. If a user had a similar problem with Perle Systems 1700 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)