English dropdown-ico

Manual Henny Penny CF-941

6 pages 0.12 mb
Download

Go to site of 6

Summary
  • Henny Penny CF-941 - page 1

    Model CF-941 SECTION 3. OPERATION 3-1. INTRODUCTION This section provides operating procedures for the multipurpose holding cabinets. Read the Introduction, Installation and Operation Sections and all instructions should be foll owed before operating the cabinet. This section contains an explanation of all controls, components, and information on o ...

  • Henny Penny CF-941 - page 2

    Model CF-941 Figure 3-1 3-3. START-UP Before using the cabinet, it should be thoroughly cleaned as described in the cleaning procedures section of this manual. To put the cabinet into operation, move each POWER switch to the ON position and adjust each control to the appropriate temperature. The power light should illuminate indicating that the uni ...

  • Henny Penny CF-941 - page 3

    Model CF-941 3-5. CLEANING 1. Move the POWER switch to the OFF position. 2. Disconnect the electrical supply to the unit. To avoid burns, allow the unit to cool before cleaning by opening all the drawers fully for approximately 20 minutes. 3. Remove drawers by pulling straight out and tilting up. 4. Clean drawers with a cloth and soapy water. 5. Re ...

  • Henny Penny CF-941 - page 4

    Model CF-941 3-6. OPERATION AND Unit Operation PROGRAMMING Before operating the holding cabinet, read and understand this complete operation manual (supplied with each unit). The following steps are meant to be guidelines, not complete operating instructions. 1. Turn POWER switch to the ON position. 2. The display will show the setpoint temperature ...

  • Henny Penny CF-941 - page 5

    Model CF-941 3-6. OPERATION AND Timer Settings PROGRAMMING (Continued) To change a timer setpoint, press and hold the desired timer button, then use the UP and DOWN buttons to change the time. Releasing the timer button enters the time into the controls. If “Loc” shows in the display when the UP or DOWN button is pressed, the controls must be u ...

  • Henny Penny CF-941 - page 6

    Model CF-941 3-6. OPERATION AND 6. Press and release the SET button 4 times and “In-” PROGRAMMING shows in the display. In- means initialization. Press (Continued) and hold the UP or DOWN button at this time and allow the display to count down from 3. The buzzer will sound and the controls will be set at factory settings. 7. Press and release t ...

Manufacturer Henny Penny Category Food Warmer

Documents that we receive from a manufacturer of a Henny Penny CF-941 can be divided into several groups. They are, among others:
- Henny Penny technical drawings
- CF-941 manuals
- Henny Penny product data sheets
- information booklets
- or energy labels Henny Penny CF-941
All of them are important, but the most important information from the point of view of use of the device are in the user manual Henny Penny CF-941.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Henny Penny CF-941, service manual, brief instructions and user manuals Henny Penny CF-941. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Henny Penny CF-941.

Similar manuals

A complete manual for the device Henny Penny CF-941, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Henny Penny CF-941 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Henny Penny CF-941.

A complete Henny Penny manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Henny Penny CF-941 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Henny Penny CF-941, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Henny Penny CF-941, that we can find in the current document
3. Tips how to use the basic functions of the device Henny Penny CF-941 - which should help us in our first steps of using Henny Penny CF-941
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Henny Penny CF-941
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Henny Penny CF-941 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Henny Penny CF-941?

Use the form below

If you did not solve your problem by using a manual Henny Penny CF-941, ask a question using the form below. If a user had a similar problem with Henny Penny CF-941 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)