English dropdown-ico

Manual Nortel Networks 10BASE-T

330 pages 4.01 mb
Download

Go to site of 330

Summary
  • Nortel Networks 10BASE-T - page 1

    Software Rele ase V3.1.0 Part No. 309985-C Rev 00 August 2 000 4401 Gr eat Ame rica P a rkwa y Santa C lara, C A 95054 Using the Ba yStac k 410-24T 10B ASE-T Switch ...

  • Nortel Networks 10BASE-T - page 2

    ii 309985-C Rev 0 0 Copyright © 2000 Nortel Network s All righ ts reserv ed. August 20 00. The informati on in this documen t is subject t o ch ange withou t notice . The statement s , configur at ions, tech ni cal data, and recommen dations in t hi s do cument are b elieved to be ac curate and rel iable, but are pres ented with out expre ss or im ...

  • Nortel Networks 10BASE-T - page 3

    309985-C Re v 00 iii EC Dec laration of Conf ormity This pro duct co nforms ( or thes e pr oduc ts co nfor m) to the pr ovisi ons of Cou ncil Di r ective 8 9/ 336/EE C and 73/2 3/ EEC . Go to http://libra2.corpwe st.baynetworks .com/cgi-bin/ ndCGI.exe/Doc V iew/ on the Nortel Networks W orld W ide W eb site for a copy of th e Dec laratio n of Co nf ...

  • Nortel Networks 10BASE-T - page 4

    iv 309985-C Rev 0 0 Nor tel Netw orks NA Inc. Software Lice nse Agreeme nt NO TICE: Please carefu lly read t his licen se agreemen t before copying or usi n g the accom panying soft ware or installing the hardware unit with pre-enabled software (each of which is referred to as “ Software ” in this Ag reeme nt) . BY COPYING OR USING THE S OFTW A ...

  • Nortel Networks 10BASE-T - page 5

    309985-C Re v 00 v Licensee is re sponsible for the secu rity of its o w n data an d infor mation an d for mainta ining a dequate procedure s apart from the Software t o reconstru ct lost or altered f iles, data, or prog rams. 4. Limita tion of li ability . IN N O EVENT WILL NOR TEL NETWORKS OR ITS LICENSORS BE LIABLE FOR ANY COST OF SUBSTITUTE PR ...

  • Nortel Networks 10BASE-T - page 6

    ...

  • Nortel Networks 10BASE-T - page 7

    309985-C Re v 00 vii Contents Preface A u dience ............... ................... ................................. ......................... .................... ...... .. xxiv Organizatio n ......... ............. ................... ............. .................... ............ .................... ........ xxiv T e xt Conventions ......... ...

  • Nortel Networks 10BASE-T - page 8

    viii 309985-C Re v 00 Configuratio n and Swi tch Manage ment .......................... ............. ................... ............. . 1-17 Flash Memor y Storage ................... ............. ...... ....... ...... ....... ...... ............. ...... ....... ...... . 1-17 Switch Software Image ..... .................... ............. ........ ...

  • Nortel Networks 10BASE-T - page 9

    309985-C Re v 00 ix IGMP Sn ooping ................. ............. ................... ............. ............. ................... ............. . 1-54 IGMP Sn ooping Con figuration R ules .... ............. ............. ................... ............. ....... 1-58 IEEE 802 .1p Pr iori tizing .... ............. ................... .......... ...

  • Nortel Networks 10BASE-T - page 10

    x 309985-C Rev 0 0 Initial S etup ..... ................... ............. ............. ................... ............. ................... ............ .. 2-17 Standalo ne Swit ch Setup ............... ............. .................... ............ .................... ....... 2-17 Stack Setup .... ................... ............. ............ ...

  • Nortel Networks 10BASE-T - page 11

    309985-C Re v 00 xi MultiLin k T r un k Configuration ......... ....... ............. ...... ....... ...... ...... ............. ....... ...... . 3-58 MultiLin k T r unk Confi guration Sc reen ... ............. ............. ................... ............. . 3-60 MultiLin k T r unk Util izati on Sc reen ................ ...... ....... ...... .... ...

  • Nortel Networks 10BASE-T - page 12

    xii 309985-C Re v 00 Diagnosi ng and Cor rec ting the Problem ......................... ....... ...... ...... ....... ...... ............. ... 4-4 Nor mal P ower-Up Se quence ................. ............. ............. ................... ............. ......... 4-5 P or t Connectio n Problems ............. ............. .................... .... ...

  • Nortel Networks 10BASE-T - page 13

    309985-C Re v 00 xiii Appendix D Connector s and Pin Assignments RJ-45 (10BASE -T/100B ASE -TX) P o r t Connectors ..................... ...... ....... ............. ...... .. D-1 MDI and MDI- X De vices .... ............. ................... ............. ................... ............. ............... D-2 MDI-X to MDI Cable Connections .. ..... ...

  • Nortel Networks 10BASE-T - page 14

    ...

  • Nortel Networks 10BASE-T - page 15

    309985-C Re v 00 xv Figures Figure 1-1. Bay Stack 410-24T S witch ..... ............. ............. ................... ............. ......... 1-1 Figure 1- 2. Bay Stack 410-24T S witch F ront P anel .................. ............. ................... ... 1-2 Figure 1- 3. Bay Stack 410-24T S witch LE D Displa y P anel ...... ................... . ...

  • Nortel Networks 10BASE-T - page 16

    xvi 309985-C Re v 00 Figure 1- 30. VLAN P o r t C onfiguration Screen Ex ample ........... ............. ................... . 1-51 Figure 1- 31. VLAN Confi guration Spann ing Mu ltiple S witches ....... .................... ....... 1-52 Figure 1- 32. IP Multic ast Propa gation Wi th IGMP R outing ............. .................... ....... 1-55 Fig ...

  • Nortel Networks 10BASE-T - page 17

    309985-C Re v 00 xvii Figure 2- 11. Ba y Stack 410-24T S witch Se lf-T e st Screen ................ .................... ....... 2-15 Figure 2-12 . Nor tel Networks Logo Screen ............ ............. ............ .................... ....... 2-16 Figure 2-13 . Main Menu for Standalone Switch ........... ................... ............. ....... ...

  • Nortel Networks 10BASE-T - page 18

    xvii i 30998 5-C Rev 0 0 Figure 3- 29. Rate Limi ting Con figuration Sc reen (1 of 2 ) .......... ................... ............. . 3-69 Figure 3- 30. Rate Limi ting Con figuration Sc reen (2 of 2 ) .......... ................... ............. . 3-70 Figure 3-31 . IGMP Con figuration Menu Sc reen ..... ................... ............. .......... ...

  • Nortel Networks 10BASE-T - page 19

    309985-C Re v 00 xix Figure C-3. Configur ing 8 02.1Q VLA Ns (3 of 3) ... ................... ............. ............. ........ C-4 Figure C-4. Configur ing th e BayStack 450-2M 3/2S3 MDA (1 of 3) .......................... .. C-5 Figure C-5. Configur ing th e BayStack 450-2M 3/2S3 MDA (2 of 3) .......................... .. C-6 Figure C-6. Confi ...

  • Nortel Networks 10BASE-T - page 20

    ...

  • Nortel Networks 10BASE-T - page 21

    309985-C Re v 00 xxi Ta b l e s T able 1-1. Ba yStack 410-24T Sw itch LED Des cr iptions ........ ............. ................... ... 1-4 T able 1-2. Inter nation al P ower Cord Spec ifications ......... ............ .................... ......... 1-7 T able 1-3. Suppor ted SNMP T raps . ............. .................... ............ ........... ...

  • Nortel Networks 10BASE-T - page 22

    xxii 309985-C Rev 0 0 T able 3-26. Rate Limi ting Config uration Scre en Fields ...... ................... ............. ....... 3-71 T able 3-27. IGMP Con figuration Menu Sc reen Opti ons ..... ................... ............. ....... 3-72 T able 3-28. IGMP Config uration Scre en Fields .... ................... ............. ............. ....... ...

  • Nortel Networks 10BASE-T - page 23

    309985-C Re v 00 xxiii Preface Congratul ations o n your pu rchase of the Bay Stack ™ 410- 24T 10B ASE-T Switch, part of the Norte l Networ ks ™ BayStack Switch li ne of communic ations pr oducts. This gui de descri bes the fe ature s, uses, and install ation pr ocedures f or the BayStack 4 10-24T 10 B ASE-T Swit ch (also referre d to in th is ...

  • Nortel Networks 10BASE-T - page 24

    Using the BayS tack 410 -24T 10BA SE-T Switch xxiv 30 998 5-C Rev 00 A udie nce This guide is in te nd ed for ne twor k inst al ler s and s yst em ad m ini st rato rs wh o are respons ible for installin g, conf igur ing, or mai ntaining network s. This guid e assume s th at you und ersta nd t he t ran smis si on and manag ement pro tocol s use d on ...

  • Nortel Networks 10BASE-T - page 25

    Prefac e 309985-C Re v 00 xxv T ext Con ven tio ns This gui de uses the foll owi ng te xt con ventions: bold te xt Indicate s command na mes and opti ons and te xt that you need to enter . Example: Ent er show ip { ale r ts | r outes }. Example: Use the dinf o comm and . ital ic text Indicate s f ile and di rectory name s, ne w terms, book titles , ...

  • Nortel Networks 10BASE-T - page 26

    Using the BayS tack 410 -24T 10BA SE-T Switch xxvi 309985- C Rev 00 Acr on yms This gui de uses the follo wing acron yms: A TM asynchrono us transf er mode BootP Bootstrap Protoc ol BPDU Bridge Prot ocol Data Unit BUS broadcast and unk no wn serv er CI console i nterf ace CRC cycl ic redunda nc y check CSMA/CD carrier sense mu ltiple access /colli ...

  • Nortel Networks 10BASE-T - page 27

    Prefac e 309985-C Re v 00 xxvii MD A media depend ent adapter MDI medium dependent i nterfa ce MDI-X medium depende nt inter face- crosso ver MIB M ana g emen t Info rmat io n Bas e ML T Mul tiL ink Trunk NIC netw ork inter face contro ller NMS network management stat ion PID Protoc ol Ide nti f i er PVID port VLAN iden tifier RADIUS Remote Authent ...

  • Nortel Networks 10BASE-T - page 28

    Using the BayS tack 410 -24T 10BA SE-T Switch xxviii 309985-C Rev 00 Relate d Publications F or more inf ormation a bout using the Bay Stack 410-2 4T switch, r efer to t he follo wing publi catio ns: • Instal ling Media De pendent Adap ters ( MD As) (Part number 302403 -E) Describe s ho w to instal l opti ona l medi a depen dent ada pte rs to yo ...

  • Nortel Networks 10BASE-T - page 29

    Prefac e 309985-C Re v 00 xxix Ho w to Get Help If you pu rchased a servi ce contra ct for you r Nortel Ne tworks prod uct from a distri butor or authoriz ed resell er , contact t he techni cal s upport st aff for that distri butor or reselle r for ass istance . If you purcha sed a Nortel Networks service progr am, contact one of the following Nort ...

  • Nortel Networks 10BASE-T - page 30

    ...

  • Nortel Networks 10BASE-T - page 31

    309985-C Re v 00 1-1 Chap ter 1 Intr oduction to the Ba yStac k 410-24T Switch This chapt er in trod uce s t he Ba ySt ack 41 0- 24 T sw itch a nd c overs th e foll owing topics: • Physic al descri pt ion • Summary of featur es • Networ k conf igur ation e xamples • Over vie w of main f eatures Description The BayStac k 410-2 4T switch (s e ...

  • Nortel Networks 10BASE-T - page 32

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-2 3099 85-C Rev 00 Fr ont P anel Figure 1- 2 sho ws the BayStack 410- 24T swit ch front p anel. Descr iptions of the front p anel co mponents fol lo w the fi gure. F or a descr iption o f the compone nts loca ted on the back panel o f the BaySt ack 410-24T swi tch, see “ Back Pa nel ” on pag e 1-6 ...

  • Nortel Networks 10BASE-T - page 33

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1- 3 The consol e port d efa ult setti ngs are: 9600 baud wi th eight data bit s, one stop bit, and no par ity as t he communic ations f ormat, with flo w cont rol set to Xon/Xof f. Uplink/Expansion ModuleS lot The Uplink/ Expansion Module s lot allo ws you to attac h optional media d ...

  • Nortel Networks 10BASE-T - page 34

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-4 3099 85-C Rev 00 LED Displa y P anel Figure 1- 3 sho w s the LED di splay panels used wit h the Ba yStack 4 10-24T swi tch. Figure 1 -3. Ba yStack 410-24T Switch LED Display P anel Ta b l e 1 - 1 provid es descript ions of the LEDs. T able 1-1. BayStac k 41 0-24T Swit ch LED Descript ions Label T yp ...

  • Nortel Networks 10BASE-T - page 35

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1- 5 CAS Up Stac k mode Off The s witch is in stand alone mo de. Green O n The s witch is conn ected to the ups tream unit ’ s Cascad e A In conne ctor . Y ello w On The Cascade A Out connec tor (CAS Up) f or this s witch is looped i nternally (wr apped to the sec ondary ring). Y el ...

  • Nortel Networks 10BASE-T - page 36

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-6 3099 85-C Rev 00 Back P ane l This sec tion desc ribes the BayStac k 410-24T swi tch back pa nel comp onents ( Figure 1- 4 ). Desc ript io ns of the b ack p anel c omp onen ts fo ll ow the figure. Figure 1 -4. BayStac k 410- 24T Swit ch Back P anel This au tomatic p roces s is a tem porary saf eguar ...

  • Nortel Networks 10BASE-T - page 37

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1- 7 A C P o wer Receptac le The A C po wer re ceptacle accep ts the A C po wer cord (supp lied). F or installat ion outside of Nort h America, mak e sure t hat you ha v e the p roper po wer c ord for you r re gion. An y cord u sed must ha v e a CEE-22 s tandard V f emale connecto r o ...

  • Nortel Networks 10BASE-T - page 38

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-8 3099 85-C Rev 00 RPSU Connector The RPSU connec tor all ows you to conne ct a backu p po wer supply unit t o the switch. Nor tel Netw orks pro vides an (op tional) hi gh-po wer redundant p owe r supply un it (HRPSU) fo r this pur pose. The HRPSU i s a hot-s wappable po wer supply u nit tha t pro vid ...

  • Nortel Networks 10BASE-T - page 39

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1- 9 Features BaySta ck 410-24T s witches of fer th e follo wing featu res: • High-spe ed forwa rding rat e: Up to 1 mi llion pa cket s per sec ond (peak) • Store -an d -fo rwa rd s witch : Full -per f orma nce fo rwar d ing at full line sp ee d, utili zing a 1.28 Gi gabit/ second ...

  • Nortel Networks 10BASE-T - page 40

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-10 3099 85-C Rev 00 • Console/ Comm port: Allo ws use rs to c onf igure and manage the s witch lo cally or rem otely . • V irtual loca l area net works ( VLANs), sup porting: -- IEEE 80 2.1Q port-ba sed VLANs -- Protoco l-based VLANs • TELNET : -- Suppor t for up t o four simult aneous TELNET se ...

  • Nortel Networks 10BASE-T - page 41

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-11 • Front pan el light -emitti ng diodes ( LEDs) to monitor th e follo wing: -- Power sta tus -- Syst em status -- Stac k status for th e follo wing: - Cascade Up and Cascad e Do wn status - Base uni t statu s -- RP SU st atus -- Per -port status for the follo wing: - 10 Mb /s li ...

  • Nortel Networks 10BASE-T - page 42

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-12 3099 85-C Rev 00 Vir tual Loc al Ar ea Networks (VLANs) In a tr adition al sha red-media network , traf fi c generat ed by a station is propa gated to all other st ations on t he loc al se gment. Ther efore, for an y gi ven sta tion on th e share d Eth ern et , th e l oca l s egment is th e co ll i ...

  • Nortel Networks 10BASE-T - page 43

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-13 Securit y Y our BayStack 410-24T sw itch sec urity fe ature can pro vide thr ee le vels of securi ty for your loca l area net work (L AN): • MA C address-bas ed securi ty -- Limi ts acces s to the s witch base d on allo wed source M A C addresses. • RADIUS-based s ec urity -- ...

  • Nortel Networks 10BASE-T - page 44

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-14 3099 85-C Rev 00 In this conf igurat ion e xample, t he follo wing securit y measures are imple mented: • The s witch -- MA C address- based sec urity is used to al lo w up to 448 author ized stat ions (MA C addresse s) access to one or more swit ch port s (see “ MA C Address-Based Se curity ? ...

  • Nortel Networks 10BASE-T - page 45

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-15 MA C Address-Based Security The MA C address- based secur ity featur e allo ws you to set up netw ork access control , based on source MA C addre sses of a uthorized station s. Y ou can: • Create a list of up to 448 MA C addres ses and spe cify whic h addre sses are authori zed ...

  • Nortel Networks 10BASE-T - page 46

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-16 3099 85-C Rev 00 RADIUS-Based Network Security The RADIUS-bas ed secu rity fea ture all o ws you to set up net work access co ntrol, using th e RADIUS (Remot e Authenti cation Di al-In User Service s) securi ty protoco l. The RADIUS-bas ed securi ty featu re uses t he RADIUS pro tocol to authent ic ...

  • Nortel Networks 10BASE-T - page 47

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-17 IGMP Snooping F eature F or conser ving bandwi dth and cont roll ing IP mult icast, the IGMP s nooping featur e can pro vide the same b enef it as I P multicast router s, bu t in t he local a rea. F or more infor mation about th e IGMP snooping fea ture, see “ I GMP Snooping ? ...

  • Nortel Networks 10BASE-T - page 48

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-18 3099 85-C Rev 00 Configuration P arameters Certain conf igurati on paramet ers, incl uding the system char acteris tics st rings, some V LAN p aram eters , IGM P con figuratio n para m eter s, and th e Mult iLi n k T runk names are stored i n flash memor y . These parameters are upd ated e very 10 ...

  • Nortel Networks 10BASE-T - page 49

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-19 MultiLink T runki ng The MultiLi nk T runking featur e allo ws you to gro up multiple po rts (up t o four) togethe r when formi ng a link t o another switch or serv er , thus increa sing aggre ga te thr oughp ut of the intercon nect ion bet ween tw o de vices (up to 800 Mb/s in f ...

  • Nortel Networks 10BASE-T - page 50

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-20 3099 85-C Rev 00 Y ou can atta ch a probe de vice ( such as a Nor tel Netw orks Sta ckProbe, or equi val ent) to t he design ated moni tor port . F or more inf ormation a bout the p ort mirro ring feat ure, see “ P ort Mir roring (Con ver sation St eering) ” on page 1- 82 . Boot P A utomatic IP ...

  • Nortel Networks 10BASE-T - page 51

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-21 SNMP MIB Suppor t The BayStac k 410-2 4T switch suppor ts an S NMP agent with indu stry sta ndard MIBs, a s well as priv ate MI B exten si ons, w hich e nsur es com p ati b ility w ith exi sting net work mana gement tool s. The BaySta ck 410-2 4T switch suppor ts the MIB-II (RFC ...

  • Nortel Networks 10BASE-T - page 52

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-22 3099 85-C Rev 00 Netw ork C onfig urati on Y ou can use Bay Stack 41 0-24T switc hes to conn ect w orkstat ions, pers onal computers (PCs), and se rver s to each other by connecting t hese de vices di rectly to the swit ch, throug h a shar ed media hub that is c onnected t o the swit ch, or by crea ...

  • Nortel Networks 10BASE-T - page 53

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-23 Figure 1 -6. BayStac k 410- 24T Swit ch Used as a Des ktop Sw itch Server Up to 22 users To Network Center Key 10 Mb/s 100 Mb/s 200 Mb/s BayStack 410-24T switch 10BASE-T hub Before After Server To Network Center BS41005A - 22 users share 10 Mb/s (10/22 Mb/s per user) - Server bot ...

  • Nortel Networks 10BASE-T - page 54

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-24 3099 85-C Rev 00 Segment Switch Application Figure 1- 7 sho ws the BayStack 410-24T swit ch used as a se gment swit ch to alle viate user c ontention for ba ndwidth and eliminat e serv er and networ k bottle necks. Befo re se gm e nta ti on, 88 use rs had a to ta l b andwidt h o f o nly 10 M b/s a ...

  • Nortel Networks 10BASE-T - page 55

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-25 High-Density Switched W orkgroup Application Figure 1- 8 sho ws a BayStack 410-24T switch using an (o ptional) 400-4TX MD A to connec t to a BayStac k 450 switch . The Baystac k 450 switc h prov ides a high-sp eed connecti on to a Nortel Net works Acce lar ™ 110 0 switch. BaySt ...

  • Nortel Networks 10BASE-T - page 56

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-26 3099 85-C Rev 00 F ail-Safe Stac k Application Figure 1- 9 sho ws eight switches (a singl e BayStack 4 50 switch a nd se v en BaySta ck 410-2 4T switc hes) t hat ar e stac ked tog ether as a si ngle mana ged un it. If any unit in the stac k fails, the re main ing s tack re main s o pe rat io nal . ...

  • Nortel Networks 10BASE-T - page 57

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-27 Stack Operati on BayStack 4 10-24T s witches pr ovide fail -safe st ackabil ity when you install (option al) BaySta ck 400-ST1 Cas cade Modules . The BayStac k 400-ST1 Cascade Mo dule suppor ts the f ollo wing switches 1 : • Nortel Netw orks Business Pol icy Switch 2000 ™ • ...

  • Nortel Networks 10BASE-T - page 58

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-28 3099 85-C Rev 00 Yo u must ens ure th at th e Inte rope rabi l ity S o ftwa re V e rsi on Nu m bers (ISV Ns) are identi cal. That is, the ISVN for the BayStac k 450 and 410- 24T must be the same as the ISVN for th e Bus ine ss Po licy Swi tch . Y ou can v erify your switc h sof tw are ve rsio n and ...

  • Nortel Networks 10BASE-T - page 59

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-29 Ba yStack 400-ST1 Cascade Module The front -panel component s of the BayStack 400-ST1 Cascade Modul e are sho wn in Figure 1-11 . Co mponent desc riptions foll o w the f igur e. Figure 1 -11. BayStack 400-ST1 Front-P anel Com ponents Cascade A Out Connector Pro vides a n attachme ...

  • Nortel Networks 10BASE-T - page 60

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-30 3099 85-C Rev 00 Cascade A In Connector Pro vides a n attachme nt point f or accept ing a c ascade ca ble connec tion from a n adjacen t unit in the st ack. A re tu r n cable from t his uni t ’ s Casca de A Out connector to the a dja cen t unit ’ s Cascade A In con nec tor c omple te s t h e st ...

  • Nortel Networks 10BASE-T - page 61

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-31 Base Unit The base u nit is t he uniqu e stack un it that you conf igure with th e Unit Sele ct switch on the f ront panel of the 400 -ST1 Cascade Module ( see “ Unit Sele ct Switch ” on page 1-29 ). One unit i n the sta ck mus t be c onf igured as the bas e unit; all other u ...

  • Nortel Networks 10BASE-T - page 62

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-32 3099 85-C Rev 00 • T emporary Base Unit If an as signed bas e unit fail s, the ne xt unit in the s tack orde r automa ticall y becomes t he ne w tempor ary base unit , as foll ows: If the assigned b ase unit i s a Busine ss Polic y Switch (in a mi xed stack conf iguration), the ne xt Busine ss Po ...

  • Nortel Networks 10BASE-T - page 63

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-33 • Stack MA C Address The Stac k MA C addr ess is assig ned automati cally du ring the s tack initia liz ation . The base u nit ’ s M A C add ress, with an o ffset, is use d fo r the Stack MA C addres s. For example , if th e base uni t ’ s MA C address i s: 00-00-82 -99-44- ...

  • Nortel Networks 10BASE-T - page 64

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-34 3099 85-C Rev 00 Stac k Up Configurations In Figure 1-13 , data fl ows from th e ba se uni t ( uni t 1) to t he n ext s witch , wh ich is assigne d as unit 2 , and con tinues unt il the l ast swit ch in the stack is assign ed as unit 8. Th e phys ical orde r of the switches i s fr om bottom to top ...

  • Nortel Networks 10BASE-T - page 65

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-35 Figure 1 -14. Stack Down Configuration Example Certain networ k management s tation ( NMS) applicat ions ass ume a stack d own conf iguration f or the gra phical us er int erfa ce (GUI) th at repre sents the stack (see Figure 1- 14 ). For th is re as on, N or te l Ne two rks rec ...

  • Nortel Networks 10BASE-T - page 66

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-36 3099 85-C Rev 00 • Y ou can do wnline upgrad e the enti re stac k from an y swit ch in the stack. • Y ou can acces s and manage t he stack using a TELNET c onnection or an y generic SNMP management tool thr ough an y switch port t hat is par t of the stack c onfi guratio n. • When st acking t ...

  • Nortel Networks 10BASE-T - page 67

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-37 Figure 1 -15. Redundant Cascade Stac king Feature Unit 2 1 = Base unit 2 = Last unit 3 = Cascade cable (PN 303978-A) 4 = Cascade max-return cable (PN 303979-A) BS0035B Cascade A Out Cascade A In Unit 1 Unit 5 Unit 4 Unit 3 2 1 B A 4 3 ...

  • Nortel Networks 10BASE-T - page 68

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-38 3099 85-C Rev 00 IEEE 802.1Q V LAN W orkgroups BayStack 4 10-24T swit ches suppor t up to 64 VLANs with 802.1Q t agging a v a il abl e per port . Ports ar e gr oupe d int o broa dca st domain s by ass ign ing them to the same VLAN. Fr ames recei ved i n one VLAN can onl y be forw arded wit hin that ...

  • Nortel Networks 10BASE-T - page 69

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-39 IEEE 802.1Q T ag ging BaySta ck 410 -24T swit ches operat e in ac cor dan ce wit h the IEEE 802.1Q taggi ng rules. I mportant t erms us ed with th e 802.1Q taggi ng featur e are: • VLAN identif ier (VID) -- the 12-b it porti on of the VLAN tag in the frame head er tha t ide n t ...

  • Nortel Networks 10BASE-T - page 70

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-40 3099 85-C Rev 00 • Filte ring data base iden tifier (FI D) -- the spec ific filterin g/fo rwardi ng d atab ase within t he BayStack 410-24T swit ch that i s assigne d to each VLAN. Th e current v ersion of softw are as signs all VLANs to t he same FID. This is referr ed to as Sh ared VLAN Learn i ...

  • Nortel Networks 10BASE-T - page 71

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-41 In Figure 1-18 , unta gged incomi ng packe ts are as signed di rectly t o VLAN 2 (PVID = 2). Port 5 i s conf igured as a tagged member of VLAN 2, and p ort 7 is conf igured as an un tag ged me mb e r of VLA N 2 . Figure 1- 18. P or t-Based V LAN Assignmen t As sho wn in Figure 1- ...

  • Nortel Networks 10BASE-T - page 72

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-42 3099 85-C Rev 00 In Fi gure 1-20 , t agged inco ming pack ets are as signed di rectly to VLAN 2 bec ause of the t ag assign ment in the packet . Port 5 is conf igured a s a tag ged me mb er of VLAN 2, and port 7 is conf igured as an untagged member of VLAN 2. Figure 1 -20. 802.1Q T ag Assignmen t A ...

  • Nortel Networks 10BASE-T - page 73

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-43 VLANs Spanning Multiple Switches Y ou can use VLANs t o seg ment a netw ork wi thin a switch . When conne cting mult iple s wit ch es, it is p os sib l e to c on nect use rs of o ne VL AN w i th us ers of tha t same VLAN in ano ther swit ch. Ho we v er , the conf iguration guide ...

  • Nortel Networks 10BASE-T - page 74

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-44 3099 85-C Rev 00 Because t here is o nly one link betwe en the tw o swit ches, the S panning T ree Protocol ( STP) t re at s this con f i gur at ion as an y other switch-t o- swit ch connect io n. F or this conf igurati on to wor k properl y , both switche s must su pport the 802.1Q tagging protoc ...

  • Nortel Networks 10BASE-T - page 75

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-45 T o connect multipl e VLANs across switches wi th redunda nt links , the STP must be disab led on all partici pating s witch p orts. Figure 1 -24 sho ws possible conseque nces of ena bling the STP when using VLANs betwee n untagged (non-802 .1Q tagged) s witche s. Figure 1 -24. P ...

  • Nortel Networks 10BASE-T - page 76

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-46 3099 85-C Rev 00 Shared Serv ers BaySta ck 410-24T s witches al lo w port s to e xist in multip le VLANs fo r shared resourc es, suc h as serv ers, printe rs, and swi tch-to-s witch connectio ns. It is also possibl e to ha ve resou rces e xist i n multiple VLANs on one swit ch as s ho wn in Figure ...

  • Nortel Networks 10BASE-T - page 77

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-47 Figure 1 -26. VLAN Broadcast Domains With in the Switch The broadc ast doma in for ea ch of the VLANs sho wn in Figure 1- 26 is created b y conf iguring VLAN port memb erships f or each VLAN an d then conf iguring each of the p orts with the app ropriat e PVID/VLAN associ ation: ...

  • Nortel Networks 10BASE-T - page 78

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-48 3099 85-C Rev 00 T o conf igure the VLAN port membership f or VLAN 1: 1. Selec t Swi tch C onfigura tion from the B aySt ack 4 10- 2 4T sw itch M ain Menu (or pr ess w). 2. Fr om the Swit ch Conf iguration Menu, se lect VLAN Conf iguration (or pr ess v). 3. Fr om the VLAN Conf iguration Me nu selec ...

  • Nortel Networks 10BASE-T - page 79

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-49 Ports 2, 4, 6, 8, 10, and 11 are n ow u ntagged members of VLAN 3 as s ho wn in Figure 1- 26 on page 1-47 . Figure 1 -28. VLAN Configuration Screen Example T o co nfigure th e PV ID (po rt VL AN i denti fier) fo r Port 8: 1. Fr om the VLAN Conf iguration scr een, pr ess [C trl]-R ...

  • Nortel Networks 10BASE-T - page 80

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-50 3099 85-C Rev 00 Figure 1 -29. Default VLAN P or t Configuration Screen Example Figure 1- 30 shows the VLA N Por t Con figurat ion sc ree n af te r it is configur ed t o support the PVID ass ignment for port 8, as sho wn in Fi gure 1-26 (Por t Name is optiona l). The PVID/VLAN ass ociatio n for VLA ...

  • Nortel Networks 10BASE-T - page 81

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-51 Figure 1 -30. VLAN P or t Configuration Screen Example VLAN W orkgroup Summar y This sec tion summarize s the VLAN wor kgroup e xamples d iscussed i n the pre vious sections of this chapt er . As sho wn in Figure 1-31 , switch S1 ( a BaySta ck 410-24T swi tch) is conf igure d wit ...

  • Nortel Networks 10BASE-T - page 82

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-52 3099 85-C Rev 00 The connec tion to s witch S2 re quires onl y one link because bo th swit ch S1 and switch S2 (BayStack 4 10-24T swit ches) supp ort 802.1Q ta gging (se e “ VLANs Spanning Mul tiple 802.1Q T a gged Switche s ” on page 1-43 ). Figure 1 -31. VLAN Configuration Spanning Multiple S ...

  • Nortel Networks 10BASE-T - page 83

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-53 VLAN Configuration Rules VLANs operate acco rding to speci fi c conf iguration rule s. When creati ng VLANs, cons ider th e fo ll owing rul es tha t de te rmin e how the c onfigure d VLA N reac ts in any netw ork to pology: • All port s that ar e in v olv ed in port mirr oring ...

  • Nortel Networks 10BASE-T - page 84

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-54 3099 85-C Rev 00 IGMP Snooping BayStack 4 10-24T s witches ca n sense IGMP hos t membershi p repor ts from attach ed stati ons and use this inf ormation t o set up a d edicated path be tween the request ing stati on and a local IP mult icast r outer . After the path way is est ablished, the BaySt a ...

  • Nortel Networks 10BASE-T - page 85

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-55 As sho wn in Figure 1-32 , a non-IP m ultic ast filtering swi tc h ca u ses I P mult icas t traffic to be sen t to al l segme nts on the lo cal s u bnet. Figure 1 -32. IP Multicast Propa gation With IGMP R outing The B a ySt a ck 4 10 -24 T swit ch c an aut o matic all y set u p ...

  • Nortel Networks 10BASE-T - page 86

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-56 3099 85-C Rev 00 One clie nt, connect ed to S2 , responds with a host membership r eport. Swit ch S2 inter cepts the r e por t fr om th at p o rt, an d gen erat e s a pr ox y rep ort to its up str ea m neighbor , S1. Also, two clients connected to S4 re spond with ho st membersh ip report s, causin ...

  • Nortel Networks 10BASE-T - page 87

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-57 After t he swit ches lear n which por ts are requesti ng access to th e IP mult icast stream, all ot her ports not re sponding to the que ries are block ed from recei ving the IP mu l tica st (see Figure 1- 34 ). Figure 1 -34. BayStack 410-24T S witch Filter ing IP Mult icast Str ...

  • Nortel Networks 10BASE-T - page 88

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-58 3099 85-C Rev 00 IGMP Snooping Configurat ion Rules The IGMP snoopi ng fea ture oper ates acc ording to specif ic conf igurat ion rules . When conf iguring your swi tch fo r IGMP snoo ping, consi der th e follo wing rules that de termin e ho w the c onf iguratio n reacts in an y network topol ogy: ...

  • Nortel Networks 10BASE-T - page 89

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-59 IEEE 80 2.1 p Pr io rit izing Y ou can use t he VLAN Conf igur ation scr eens to pr iori tize the order in which th e switch f orwards packet s, on a per -port bas is. F or e xample, if messag es from a specif ic se gment are c rucial t o your operatio n, you can set the s witch ...

  • Nortel Networks 10BASE-T - page 90

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-60 3099 85-C Rev 00 Figure 1 -36. P or t T ransmit Que ue As sho wn in Figure 1-36 , the switc h prov ides tw o transmis sion queue s, High and Low , for an y gi v en port . Frames are assigned to one of t hese queue s on th e basis of the user _prio rity v alue, using a tr aff ic class ta ble . Thi s ...

  • Nortel Networks 10BASE-T - page 91

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-61 T o co nfigure th e por t pri ority lev el, f o llow these steps : 1. Dete rmin e the prior ity level you w an t to a ssig n to the swit ch p o rt. User pri ority le vels are as signed def ault settings in all Ba yStack 410- 24T switches . The range is from 0 t o 7. The tra f f i ...

  • Nortel Networks 10BASE-T - page 92

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-62 3099 85-C Rev 00 5. Select a priori ty le v el fr om the r ange sho wn in the T raff ic Class Conf igurat ion scr een (or modify th e T raff ic Class parameters to suit y ou r needs). 6. Assi gn t h e pr io rity l evel to po r ts u sing t he VL AN Port Con figuratio n screen: a. Pr ess [Ctrl ]-R to ...

  • Nortel Networks 10BASE-T - page 93

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-63 MultiLink T runks A MultiLin k T runk (ML T) 1 allo ws you to group u p to four s witch p orts to f orm a link to anothe r switch o r serv er , thus in creasing aggre gate throughpu t of the interc onnection between the de vices as much as 80 Mb/s in full -duple x mode ( up to 80 ...

  • Nortel Networks 10BASE-T - page 94

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-64 3099 85-C Rev 00 Each of the tr unks sho wn in Figure 1-39 can be con f igur ed wit h up to fou r swit ch ports to provi de maximum aggre gate bandwid th through each t runk, in full-dup lex mode. As sho wn in this exampl e, when traf fi c between s witch-to-swi tch connecti ons approa ches s ingle ...

  • Nortel Networks 10BASE-T - page 95

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-65 Clients accessi ng data from the se rver s (FS1 and FS 2) are provi ded with maximized b andwidth thro ugh trunks T 1, T2, T3, T4, and T5 . T runk members (the por ts making u p each tru nk) do not h av e to be consec uti ve switch por ts; the y can be se lected r andomly , as sh ...

  • Nortel Networks 10BASE-T - page 96

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-66 3099 85-C Rev 00 T runk Configuration Screen Exampl es This sect ion sho ws e xamples of the Mult iLink T run k conf igura tion scre ens for the client /serv er c onf igurati on e xample sho wn in Figur e 1-41 on page 1-65 . The screens sho w how y ou could set up the trunk con fi guration screen s ...

  • Nortel Networks 10BASE-T - page 97

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-67 The MultiLi nk T runk Conf igurat ion scree n opens ( Figure 1-43 ). Figure 1 -43. MultiLink T runk Configuration Scree n f or Switch S1 Swit ch S1 is con figured a s fol lows: • T runk (read only) indica tes the t runks (1 t o 6) that corr espond to t he switch ports s pecif i ...

  • Nortel Networks 10BASE-T - page 98

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-68 3099 85-C Rev 00 -- Port s 2 and 4 ar e assi gned as tr unk member s of trunk 3. -- Port s 14 and 16 a re assign ed as trun k members of t runk 4. -- Port s 22 and 24 a re assign ed as trun k members of t runk 5. • STP Learni ng indica tes t he spa nning t ree par ticipat io n sett ing f or ea ch ...

  • Nortel Networks 10BASE-T - page 99

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-69 T runk Configur ati on Screen for Switch S2 As sho wn in Figure 1-41 on page 1- 65 , switch S2 is set up with tw o trunk conf igurations (T2 a nd T3). Both t runks conne ct direc tly to swit ch S1. As in the pre v ious scre en e xampl es, to s et up a t runk c onf igu ratio n c h ...

  • Nortel Networks 10BASE-T - page 100

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-70 3099 85-C Rev 00 • STP Learni ng indica tes t he spa nning t ree par ticipat io n sett ing f or ea ch of the trunks: T runk 1 and 2 ar e enabled f or Normal STP L earning. • T runk Mode (rea d only) in dicates the T runk Mode f or each of the trunk s: The T runk Mode f iel d v alues for tr unks ...

  • Nortel Networks 10BASE-T - page 101

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-71 T runk Configur ati on Screen for Switch S3 As sho wn in Figure 1-41 on page 1- 65 , switch S3 is set up with one t runk conf iguration (T 4). This tr unk connect s direct ly to swi tch S1. As in the pre viou s screen e xamples, to s et up an in ter -switch trunk c onf igurati on ...

  • Nortel Networks 10BASE-T - page 102

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-72 3099 85-C Rev 00 • STP Learni ng indica tes t he spa nning t ree par ticipat io n sett ing f or ea ch of the trunks: T runk 1 is enab led for Nor mal STP Learni ng. • T runk Mode (rea d only) in dicates the T runk Mode f or each of the trunk s: The T runk Mode f iel d v alue for trunk 1 is set ...

  • Nortel Networks 10BASE-T - page 103

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-73 T runk Configur ati on Screen for Switch S4 As sho wn in Figure 1-41 , switch S4 i s set up wit h one tru nk conf igurat ion (T5 ). This tr unk connect s dire ctly to s witch S 1. As in the pre viou s screen e xamples, to s et up a tr unk conf iguration c hoose MultiLin k T runk ...

  • Nortel Networks 10BASE-T - page 104

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-74 3099 85-C Rev 00 Swit ch S4 is con figured a s fol lows: • T runk (read only) indicate s the tru nk (1 to 6) that cor respon ds to the s witch ports s pecif ied in the T runk Member s f ields. • T runk Members (Unit/P ort) indicate s the po rts tha t can be con fi gured, in each ro w , to creat ...

  • Nortel Networks 10BASE-T - page 105

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-75 Before Configuring T runk s When you cre ate and ena ble a tr unk, the tr unk member s (switch ports) tak e on certai n sett ings necess ary for co rrect opera tion o f the Mul tiLi nk T runking f eatur e. These set ti ngs , al ong with s pec if ic conf igura ti on r ul es, mus t ...

  • Nortel Networks 10BASE-T - page 106

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-76 3099 85-C Rev 00 • All trunk member s must ha ve the same VLAN confi guratio n before the T r unk Conf igurat ion scr een ’ s T runk Stat us f ield ca n be set to Enable d (see “ VLAN Conf igurat ion ” on page 3-41 ). • When an a cti v e port is co nfi gured i n a tr unk, the port becomes ...

  • Nortel Networks 10BASE-T - page 107

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-77 How the MultiLink T runk Reacts to Losing Distributed T runk Me mber s If your MultiLink T runk ( Figu re 1- 47 ) spans sepa rate unit s in a st ack conf iguration an d any o f those un its ( or trunk ed MD As) beco mes inac ti ve from a loss of po wer or u nit f ailure, t he una ...

  • Nortel Networks 10BASE-T - page 108

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-78 3099 85-C Rev 00 Spanning T ree Considerations for MultiLink T runks The spanni ng tree P ath Cost para meter is recalcul ated base d on the agg re gate bandwidth of the tr unk. F or e xample , Figure 1-48 s ho ws a four -port trun k (T1) with tw o port members oper ating at 100 Mb/s and t wo at 10 ...

  • Nortel Networks 10BASE-T - page 109

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-79 Figure 1 -49. Example 1: Correctly Configure d T runk T1 S1 Port Configuration screen BS41035A S2 Port Configuration screen S1 S2 1 1 ...

  • Nortel Networks 10BASE-T - page 110

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-80 3099 85-C Rev 00 If swi tch S 2 ’ s trunk membe r port 11 i s physi cally dis connected and then reconnec ted to port 13, the Spanni ng T ree Port Conf igura tion scre en for swit ch S1 changes t o sho w port 6 in the Blocki ng state ( Figure 1-50 ). Figure 1 -50. Example 2: Detecting a Misconfig ...

  • Nortel Networks 10BASE-T - page 111

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-81 Additional Tips About the MultiLink T runking Featu re When you cre ate a MultiLi nk T runk, the indi vidual tr unk members ( the speci fi c ports t hat make up the trunk) ar e logical ly connec ted and re act as a s ingle entity . F or e xample, if y ou change sp anning tr ee pa ...

  • Nortel Networks 10BASE-T - page 112

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-82 3099 85-C Rev 00 P or t Mir r orin g ( Con versatio n St eerin g) Y ou can design ate one of y our swit ch por ts to moni tor t raf fic on an y tw o spe cif ied switch po rts (por t-bas ed) or to monitor tr af f i c to or from an y two speci fi ed addre sse s that the sw itc h has lear ned (a ddr e ...

  • Nortel Networks 10BASE-T - page 113

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-83 P or t-Based Mirroring Configuration Figure 1- 51 sho w s an e xam ple of a port-b ased mir rori ng conf i gurat ion where por t 23 is des ignated a s the mon itor port f or port s 24 and 25 of switch S 1. Althou gh this e xample sho ws port s 24 and 25 moni tored by the moni tor ...

  • Nortel Networks 10BASE-T - page 114

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-84 3099 85-C Rev 00 In the c onf igurati on e xample sho wn in Figure 1- 51 , the des ignated moni tor p ort (port 2 3) can b e set to m onitor traf fic in an y of th e follo wing modes: • Monito r all tr af f ic re cei v ed by port X. • Monito r all tr af f ic tr ansmit ted by port X. • Monito ...

  • Nortel Networks 10BASE-T - page 115

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-85 Figure 1 -52. P or t Mirror ing P ort-Based Screen Example Address-Based Mirroring Configuration Figure 1- 53 sho w s an e xample o f an a ddress -based mirro ring c onf ig urati on where port 23 , the designate d monitor port for swit ch S1, is monitorin g traf fic occurring bet ...

  • Nortel Networks 10BASE-T - page 116

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-86 3099 85-C Rev 00 Figure 1 -53. Address-Based Mirr or ing Configuration Example In this conf igur ation, th e desi gnated monit or port ( port 23 ) can be s et to monit or traf fic i n any of the follo wing mode s: • Monito r all tr af f i c transmit ted from ad dress A to an y address. • Monito ...

  • Nortel Networks 10BASE-T - page 117

    Introdu ction to the Ba yStack 4 10-24 T Switch 309985-C Re v 00 1-87 In thi s e xample, port 23 becomes the de signated Monitor Por t for swit ch S 1 whe n you press [Ente r] in re sponse to t he [Y es] scr een prompt. The Monitor ing Mode f ield [ Address A - > Addres s B ] indic ates tha t all traf fic t ra nsmi tt ed by a ddr ess A t o addre ...

  • Nortel Networks 10BASE-T - page 118

    Using the BayS tack 410 -24T 10BA SE-T Switch 1-88 3099 85-C Rev 00 P or t Mirroring Configuration Rules The foll o w ing conf iguration r ules appl y to an y port mirrori ng conf iguration: • A monitor p ort cannot be conf igure d as a trunk membe r or IGMP member , and cannot be used f or normal s witch func tions. • When a port is con fi gur ...

  • Nortel Networks 10BASE-T - page 119

    309985-C Re v 00 2-1 Chap ter 2 Installing the Ba yStac k 410 -24T Switc h This chapt er covers th e fo llowing top ics: • Instal lati on requir ements • Instal lation p rocedur e • Instru ctions for conne cting po wer • Instr uct io ns for verifyi n g the inst al lati on • Instru ctions for the initial (sta ndalone) switch setup • Inst ...

  • Nortel Networks 10BASE-T - page 120

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-2 3099 85-C Rev 00 Figure 2 -1. P ack age Contents The number of box es and thei r conten ts depend s on the options you order ed. Open any access ories box and ve rify that the contents agree wit h your bill of materi als. If an y items are mis sing or dama ged, contac t the sal es agent o r the cust ...

  • Nortel Networks 10BASE-T - page 121

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2- 3 Instal lation Pr ocedure This sec tion pro vides the re quireme nts and in struc tions for instal ling the BayStack 410-24T switch on a flat surf ace or i n a s tandard 1 9-inch ut ility rack. If you inst all the s witch in a rack, ground t he rack t o the same gr ounding electro de u ...

  • Nortel Networks 10BASE-T - page 122

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-4 3099 85-C Rev 00 The BayStac k 410-2 4T switch ca n be mounted o nto an y appropriate f lat, le vel surf ace t hat can safely s upport t he weig ht of t he switch and its attache d cabl es, as long as t here is adequat e space ar ound the un it for vent ilati on and acces s to cabl e connecto rs. T ...

  • Nortel Networks 10BASE-T - page 123

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2- 5 The BayStac k 410-2 4T switch oc cupies a 1. 6-unit (1.6u) ra ck space an d can be instal led in most standar d 19-inch r acks. Ground the rack t o the same groundi ng electr ode used by the po wer service in the ar ea. The perman ent ground path must not e xceed 1 ohm of res istan ce ...

  • Nortel Networks 10BASE-T - page 124

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-6 3099 85-C Rev 00 Ther e are three slo ts loca ted on th e sid es of t he c hassi s. Y ou can inst al l the switch f lush to the r ack or e xtended from the r ack, dependi ng on ho w you instal l the mounting bracke ts. 2. Attach a mount ing brack et to eac h side of t he switch us ing the suppl ied ...

  • Nortel Networks 10BASE-T - page 125

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2- 7 4. Insert t wo s cre ws, appr opriate f or y our 19-inch rack, i nto each of the mounting brac kets a nd tighten. 5. After th e switch is secur ed in the rack, pr oceed to the next sect ion, “ Attachi ng Devi ces to the BayStack 410- 24T Switch . ” Attaching Devices to the Ba ySta ...

  • Nortel Networks 10BASE-T - page 126

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-8 3099 85-C Rev 00 Connecting 10B ASE-T P or ts and 10/100 MD A P ort s Connect de vices t o the 10B ASE-T port s and to th e (opt ional) 10 /100 MD A ports as s hown i n Figure 2-5 . The 10B ASE-T s w itch po rts and the 10/ 100 MD A ports are conf igure d with RJ-45 connecto rs that a re wired a s M ...

  • Nortel Networks 10BASE-T - page 127

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2- 9 Connecting Fi ber Optic MD A P or ts Conn e ct d evices to (op tio na l) MDA f iber o ptic p orts a s shown in Figure 2-6 . The 400-4FX MD A is a 100B ASE-FX de vice that us es MT -R J port co nnectors with 62.5/ 125 micron mul timode f iber optic ca ble. The 400- 2FX MD A is also a 1 ...

  • Nortel Networks 10BASE-T - page 128

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-10 3099 85-C Rev 00 Console/Comm P or t The seri al consol e inte rfac e is an RS-23 2 port tha t enables a conne ction to a PC or termina l for mo nitoring and conf iguring a st andalone s witch or a stack conf iguratio n.Y ou can also con nect this por t to an ext ernal mode m to ena ble remote dial ...

  • Nortel Networks 10BASE-T - page 129

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2-11 Connecting a T erminal t o the Console/ Comm P or t T o connect a ter minal to t he Console /Comm port: 1. Set the t erminal pr otocol as descr ibed in “ Console/Comm P ort ” on page 2-10 . 2. Connect the termin al (or a computer in termina l-emula tion mode) to the console p ort ...

  • Nortel Networks 10BASE-T - page 130

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-12 3099 85-C Rev 00 Connecting P ower The BayStac k 410-2 4T switch doe s not ha ve a po wer on/of f switch. When yo u connect the A C po wer cord to a suita ble A C po wer out let, the switch po wers up imm ediat ely . Wa r n i n g : Rem o val of the po we r co rd is th e onl y w ay to tur n of f pow ...

  • Nortel Networks 10BASE-T - page 131

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2-13 T o connect the A C po wer cord, foll o w these s teps: 1. Plug one end of the A C power c ord into th e A C power r eceptacle o n the switch bac k panel ( Figur e 2-8 ). Figure 2 -8. Ba yStac k 410- 24T Swit ch A C P ower Receptacle 2. Plug the o ther end of t he A C power cord int o ...

  • Nortel Networks 10BASE-T - page 132

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-14 3099 85-C Rev 00 V erifyi ng the Install ation When po wer is applie d to the s witch, po wer- on self-tes ts are r un. Y ou can v erify proper o peration of the BayStack 410 -24T swi tch by obser ving the front-pa nel LEDs or by vi e wing th e self -test r esults a s display ed in the Ba yStack 41 ...

  • Nortel Networks 10BASE-T - page 133

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2-15 V erifying th e Installation Usi ng the Self-T es t Screen If a moni to r is conn ected t o the sw it ch ( see “ Cons ole /Comm Port ” on page 2-1 0 ), you can obs erv e the Bay Stack 4 10-24T swit ch Self-T est screen ( Figure 2-1 1 sho w s an exampl e of a sta ndalone swi tch Se ...

  • Nortel Networks 10BASE-T - page 134

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-16 3099 85-C Rev 00 Figure 2 -12. Nortel Networks Logo Screen Upon succ essf u l co m pleti on of t he p ower-up s e lf-te sts, the sw itch i s rea d y fo r normal ope ration. T o acces s the BaySta ck 410-24T Mai n Menu, pre ss [Ctrl]- Y . Note: The Nortel Netw orks logo screen f or your swit ch will ...

  • Nortel Networks 10BASE-T - page 135

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2-17 Initial Setup The BayStac k 410- 24T s witch is des ign ed f or “ plu g-and- play ” opera tion; in mos t cases t he swit ch can be i nstalle d and made oper ational using the system defaul t set tings (s ee Appendix E, “ Defaul t Sett ings , ” fo r a list of def ault settings ...

  • Nortel Networks 10BASE-T - page 136

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-18 3099 85-C Rev 00 Figure 2 -13. Main Menu f or Standalone Switch 3. Select IP Conf igurati on/Setup ( or pr ess i) f rom the Main Menu. This sel ection di splays t he IP Conf iguration/Set up screen ( Figure 2-14 ). Note: T he defaul t man agem ent V LAN (I P inte rface ) f or th e BayS tac k 410-24 ...

  • Nortel Networks 10BASE-T - page 137

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2-19 Figure 2 -14. IP Configuration/Setup Sc reen (Standalone Sw itch) 4. Enter the IP addr ess of the switc h in the In- Band IP Addr ess f ield, then pr ess [Retur n]. 5. Enter the IP s ubnet mask addr ess in the In-Ba nd Subnet Mask f ield, then pr ess [Retur n]. 6. Enter the default ga ...

  • Nortel Networks 10BASE-T - page 138

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-20 3099 85-C Rev 00 Stack Setup F or the in itial s etup of a s tack conf igurati on, you need t o ente r the st ack IP address , the subne t mas k, and the gat e way addre ss (re fe r to Chapt er 3, “ Using t he Console I nterf ace , ” for more in formati on about c onf iguring yo ur BayStack 410 ...

  • Nortel Networks 10BASE-T - page 139

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2-21 Figure 2 -15. Main Menu (St andalone Switch E xample) Figure 2 -16. Main Menu (Stac k Configuration Example) BayStack 410-24T Main Menu IP Configur ation/Se tup... SN MP Conf iguratio n... System Char acterist ics... S witch C onfigura tion... C onsole/ Comm Por t Configurat ion... Di ...

  • Nortel Networks 10BASE-T - page 140

    Using the BayS tack 410 -24T 10BA SE-T Switch 2-22 3099 85-C Rev 00 4. Select IP Conf igurati on/Setup ( or pr ess i) f rom the Main Menu. This sel ection di splays t he IP Conf iguration/Set up screen ( Figure 2-17 ). Figure 2 -17. IP Configuration/Setup Scree n (Stac k Configuration) 5. Enter the Stack IP addr ess in the In -Band Stack IP Addres ...

  • Nortel Networks 10BASE-T - page 141

    Installi ng the Bay Stack 4 10-24 T Switch 309985-C Re v 00 2-23 6. Enter the IP s ubnet mask addr ess in the In-Ba nd Subnet Mask f ield, then pr ess [Retur n]. 7. Enter the default gat eway addr ess in t he Defa ult Gateway f ield, then pr ess [Retur n]. Proceed t o Chapter 3, “ Using the Cons ole Inte rf ace , ” for de tail ed de scri p tion ...

  • Nortel Networks 10BASE-T - page 142

    ...

  • Nortel Networks 10BASE-T - page 143

    309985-C Re v 00 3-1 Chap ter 3 Using the Console Interface This chap ter de scribes ho w to conf igure and manag e the BaySta ck 410- 24T switch us ing t he menu-dri ven console i nterf ace (CI). This chapt er covers th e fo llowing top ics: • Acce ssi ng the C I men us a n d sc re ens • Using the CI menus and s creens • Descript ion of opti ...

  • Nortel Networks 10BASE-T - page 144

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-2 3099 85-C Rev 00 Using th e CI Menus an d Scre en s The CI me nus and scr eens pro vide options that all o w you to c onf igure and manage the BayStack 410 -24T switch . Help prompt s at the b ottom of eac h menu and scre en e xplain ho w to ent er data i n the highl ighted f ield and ho w to navi g ...

  • Nortel Networks 10BASE-T - page 145

    Using th e Console Interfac e 309985-C Re v 00 3- 3 F or more inf ormation a bout us ing the ac celerat or k eys, see “ Acce lerato r Keys for Repe titive T asks ” on page 3-34 . Screen Fields and Des criptions Figure 3- 1 sho ws a map of the CI scr eens. The rema inder of this chapter desc ribes the CI sc reens and their f ields, be ginni ng w ...

  • Nortel Networks 10BASE-T - page 146

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-4 3099 85-C Rev 00 Main Menu This sec tion desc ribes the options a v ailable from the CI ma in menu ( Figu re 3-2 ). The CI scr eens a nd submenus fo r these op tions are descr ibed in t he follo wing sectio ns. Figure 3 -2. Console Interfac e Main Men u Note: Some menu option s sho wn in this main m ...

  • Nortel Networks 10BASE-T - page 147

    Using th e Console Interfac e 309985-C Re v 00 3- 5 Ta b l e 3 - 1 describes the CI main menu opt ions. T able 3-1. Console Interface Main Menu options Option Descrip tion IP Configuration/ Setup... D ispla ys the IP Confi gura tion/Setup screen (s ee “ IP Config uration/ Setup ” on page 3-8 ). This screen al lows y ou to set or m odify IP c on ...

  • Nortel Networks 10BASE-T - page 148

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-6 3099 85-C Rev 00 Spanning T ree Configuration.. . Displ a ys the Spa nning T r ee Confi gura tion Men u (se e “ Spannin g T ree Config urat ion ” on pa ge 3-10 3 ). This m enu provi des the f ollow ing optio ns: Spanning T ree P or t Configur ation, D ispla y Spanning T ree Switc h Settings . TE ...

  • Nortel Networks 10BASE-T - page 149

    Using th e Console Interfac e 309985-C Re v 00 3- 7 Caution: If you c hoose the Reset t o Defaul t Settin gs option , all o f your configu r ed s etti ng s will be replac ed with fac tory defa ul t set ting s whe n yo u press [Enter]. Achtung: Bei Ausw ahl des Be f ehls zu r R ü cksetz ung auf d ie Standarde instellu ngen werd en alle v on Ih nen ...

  • Nortel Networks 10BASE-T - page 150

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-8 3099 85-C Rev 00 IP Configurati on/Setup The IP Conf igurati on/Setup sc reen ( Fig ure 3-3 ) all o ws you to set or modi fy the BayStack 4 10-24T s witch IP co nfi guration parameters. Da ta tha t you ente r in the user -conf igurable fi elds tak es e f fect as soon as y ou press [ Enter]. Choose I ...

  • Nortel Networks 10BASE-T - page 151

    Using th e Console Interfac e 309985-C Re v 00 3- 9 Ta b l e 3 - 2 describes t he IP Conf iguration/Se tup scree n f ields. T able 3-2. IP Conf iguration/Setup Screen Fields Field Desc ription BootP Request Mode One o f f our mo des of op erati on f or BootP . (See “ Choosing a BootP R equest Mo de ” on page 3-10 f or details about the f our mo ...

  • Nortel Networks 10BASE-T - page 152

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-10 3099 85-C Rev 00 Choosin g a Bo otP Reque st Mode The BootP Req uest Mode f ield in the I P Conf iguration scre en allo ws you to choose whi ch method th e switch us es to b roadcast Boot P requests : • BootP Disa bled • Boot P or Last A dd r ess • BootP When Needed • BootP Al ways Default ...

  • Nortel Networks 10BASE-T - page 153

    Using th e Console Interfac e 309985-C Re v 00 3-11 BootP Disabled Allo ws the switch to be managed only by usi ng the IP a ddress se t from the conso le termin al (t his is th e def ault mode for you r swit ch). When sel ected, this mode oper ates as f ollo ws: • The switc h does not b roadcast BootP reques ts, re ga rdless of whether an IP addr ...

  • Nortel Networks 10BASE-T - page 154

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-12 3099 85-C Rev 00 BootP When Needed Allo ws the swit ch to r equest an I P addr ess i f on e h as not alr eady b een set from t he conso le term inal. When sel ected, this mode oper ates as f ollo ws: • When the IP data i s ente red from t he conso le termin al, the data beco mes the in-band addre ...

  • Nortel Networks 10BASE-T - page 155

    Using th e Console Interfac e 309985-C Re v 00 3-13 SNMP Conf igur ation The SNMP Conf iguration screen ( Figure 3- 4 ) allo ws you to set or modify the SNMP conf igurat ion paramet ers. Choo se SN MP C onfigur ation (or press m) fro m th e mai n me nu t o ope n the SNMP Conf igurat ion scr een. Figure 3 -4. SNMP Configuration S creen Ta b l e 3 - ...

  • Nortel Networks 10BASE-T - page 156

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-14 3099 85-C Rev 00 Read-Write Comm unity String The com munit y string used f or in-band read -write SNMP ope rations . Def ault private Rang e Any AS CII s tr ing of up t o 3 2 pr in table ch aract ers T r ap #1 I P Addr e ss 1 Number one o f f our tr ap IP add resses . Success iv e trap I P address ...

  • Nortel Networks 10BASE-T - page 157

    Using th e Console Interfac e 309985-C Re v 00 3-15 System Ch arac t erist ics The S ystem Cha racte ris tics sc ree n ( Figure 3-5 ) allo ws you to vie w system charact eristi cs and contains t hree use r- conf igura ble f ields : sysCon tact, sys Name, and sysLoc ation . Choose Syst em Characte ristic s (or p ress s) fro m the main menu to open t ...

  • Nortel Networks 10BASE-T - page 158

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-16 3099 85-C Rev 00 T able 3-4. System Cha racteristic s Screen F ields Field Des cription Operat ion Mo de Rea d-only fi eld tha t indicat es the op erati on mode of the u nit, f or ex ample: • When the unit i s par t of a st ac k config urati on, the (rea d-only) fi eld in dicates t he unit is ope ...

  • Nortel Networks 10BASE-T - page 159

    Using th e Console Interfac e 309985-C Re v 00 3-17 sysObje ctID A read-only field that provides a un ique identific ation of the s witch, which conta ins the v endor ’ s private e nterpri se number . sysUpT ime A read-on ly fie ld th at s ho ws the leng th of time sin ce the l as t re se t. Note tha t th is fi eld is upda ted when the scre en is ...

  • Nortel Networks 10BASE-T - page 160

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-18 3099 85-C Rev 00 Switch Configur ation The Switch Conf igurati on Menu scree n ( Figure 3 -6 ) allo ws you to s et or modif y your sw itch conf iguration. Choose Swit ch Conf igu ration (or press w) from the ma in menu to o pen the Swi tch Conf igurat ion Menu screen. Figure 3 -6. Switch Configurat ...

  • Nortel Networks 10BASE-T - page 161

    Using th e Console Interfac e 309985-C Re v 00 3-19 T able 3-5. Switc h C onfiguration Men u Screen Options Option Descrip tion MA C Ad dress T able Displ a ys the MA C Ad dress T ab le screen (see “ MA C A ddress T able ” on page 3-21 ). T his scre en allo ws y ou to vie w all M AC address es and their assoc ia ted p or t or trunk that the s w ...

  • Nortel Networks 10BASE-T - page 162

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-20 3099 85-C Rev 00 IGMP Confi guration... Displa ys the IGM P Configu rati on Men u (see “ IGMP Co nfi gur a tio n Menu ” on page 3 -72 ). This sc reen allo ws you to o ptimiz e IP m ulticast tra ffic b y setti ng up IGM P por t memb erships t hat fil ter IP m ultica st on a per port basis (se e ...

  • Nortel Networks 10BASE-T - page 163

    Using th e Console Interfac e 309985-C Re v 00 3-21 MA C Address T ab le The M AC Addr ess T able scree n ( Figure 3-7 ) allo ws you to vie w M A C addres ses that th e sw itch h as le ar ned o r to se arch for a s pecific MAC addres s. The MA C Address T able s creen al so operat es in conj unction wi th the Port Mirroring Con f iguration screen. ...

  • Nortel Networks 10BASE-T - page 164

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-22 3099 85-C Rev 00 Ta b l e 3 - 6 describes the MA C Address T abl e screen f ields . T able 3-6. MA C Address T able Screen Fields Field Des cription Aging Time Spe cifi es how lo ng a l ear ne d MAC addres s rem ains i n the switc h ’ s f orw ardi ng databa se . If an entry is inactiv e for a per ...

  • Nortel Networks 10BASE-T - page 165

    Using th e Console Interfac e 309985-C Re v 00 3-23 MA C Address-Based Security The MA C Address Secu rity Conf iguration Menu screen ( Fi gure 3-8 ) allo ws you to choose the a ppropriat e screen to spec ify a ra nge of syst em response s to unauthor iz ed netw o rk a cce ss to your swi tc h. The sys tem res pons e c an r ang e fr om sending a tra ...

  • Nortel Networks 10BASE-T - page 166

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-24 3099 85-C Rev 00 Figure 3 -8. MA C Address Secur ity Configuration Menu Ta b l e 3 - 7 describes t he MA C Address Secur ity Conf iguration Menu o ptions . MAC Address Securit y Config uration Menu MAC Addre ss Secur ity Configurati on... MAC Addre ss Secur ity Port Config uration. .. MAC Addre ss ...

  • Nortel Networks 10BASE-T - page 167

    Using th e Console Interfac e 309985-C Re v 00 3-25 MA C Address Security Configurati on The MA C Address Security Conf iguratio n scre en ( Figure 3- 9 ) allo ws you to Enab le (or Dis ab le) the M AC Addre ss Sec uri ty fea ture an d to s pec if y th e appropri ate syst em response to an y unaut horized n etwo rk access to your swi tch. Choose MA ...

  • Nortel Networks 10BASE-T - page 168

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-26 3099 85-C Rev 00 Figure 3 -9. MA C Address Sec urity Configuration Scr een Ta b l e 3 - 8 describes t he MA C Address Secur ity Conf iguration sc reen f ields. MAC Address Security Configurati on MAC Address Security: [ Disabled ] MAC Address Security SNMP-Locke d: [ Disabled ] Partition Port on In ...

  • Nortel Networks 10BASE-T - page 169

    Using th e Console Interfac e 309985-C Re v 00 3-27 T able 3-8. MA C Address Sec urity Configuration Screen Fields Field Des cription MA C Ad dress Security When set to Enab led, the s oftw are chec ks source MA C address es of pac k ets that ar riv e on secure po r ts a gai ns t MA C address es listed in the MA C Address Security T able f or allow ...

  • Nortel Networks 10BASE-T - page 170

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-28 3099 85-C Rev 00 MA C Address Security P ort Configurati on The MA C Address Secu rity Port Conf igurati on screen (Figures 3-10 and 3- 11 ) allo ws you to Enable o r Disable the MA C address se curity f or each port . D A Filtering on In trusion When se t to Enab led, this fie ld isolat es the int ...

  • Nortel Networks 10BASE-T - page 171

    Using th e Console Interfac e 309985-C Re v 00 3-29 Choose MA C Address Se curity Po rt Conf iguration (or press p) f rom the MA C Address Se curity Con fi guration Menu to di splay the MA C Address Secu rity Port Conf igurat ion scr een. Figure 3 -10. MA C Address S ecurity P or t Config uration (Screen 1 of 2) MAC Address Security Port Configurat ...

  • Nortel Networks 10BASE-T - page 172

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-30 3099 85-C Rev 00 Figure 3 -11. MA C Address S ecurity P or t Config uration (Screen 2 of 2) Ta b l e 3 - 9 describes t he MA C Address Secur ity Port Conf igura tion scr een f ields. MAC Address Security Port Configurat ion Unit: [ 1 ] Port Trun k Securi ty ---- ---- - ---- -------- 15 [ Disabled ] ...

  • Nortel Networks 10BASE-T - page 173

    Using th e Console Interfac e 309985-C Re v 00 3-31 T able 3-9. MA C Address Security P ort Configuration Screen Fields Field Des cription Unit Allo ws you t o select the unit n umber (wh en sta ck ing is confi gured) t o vie w or configu re. T o view or config ure ano ther unit, type i ts unit n umber an d pres s [Enter] , or press the space bar t ...

  • Nortel Networks 10BASE-T - page 174

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-32 3099 85-C Rev 00 MA C Address Security P ort Lists The MA C Address Security Port List s screens allo w you to creat e port li sts tha t can be us ed as allo wed sour ce port li sts for a sp ecified M A C addr ess in the M A C Address Se curity T ab le scree n. Y ou can create as man y a s 32 port ...

  • Nortel Networks 10BASE-T - page 175

    Using th e Console Interfac e 309985-C Re v 00 3-33 Figure 3 -13. MAC Address Security P or t Lists Scre en Ta b l e 3 - 1 0 descri bes the M A C Address Securi ty Port Lists s creen f ields. T able 3-10. MA C Address Secu rity Po r t Lists S creen Fie lds Field Des cription Entry Indicat es the port list nu mber (S1 to S32) that correspon ds to th ...

  • Nortel Networks 10BASE-T - page 176

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-34 3099 85-C Rev 00 P or t List Syntax When you ent er a port list in a stack co nf igurat ion, you must specify e ither a unit/p ort number l ist, NONE, or ALL. In a stac k conf igur ation, ALL in dicates all of the s tack port s; in a s tandalone switch , ALL indicat es all of the swit ch ports. A u ...

  • Nortel Networks 10BASE-T - page 177

    Using th e Console Interfac e 309985-C Re v 00 3-35 Adding a New P ort to an Existing P ort Number List: In the exampl e shown in Figure 3-13 on page 3-33 , S3 s ho ws the Port List f ield v alues as: 1/3,2/7,3 /1-4 If you w ant to add anot her por t (for e xample, po rt 2/9 ) to the e xisting port numbe r list, yo u could highl ight the f ield and ...

  • Nortel Networks 10BASE-T - page 178

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-36 3099 85-C Rev 00 MA C Address Security T ab l e The MA C Address Se cur it y T a bl e s creen all o ws you to s pec if y t he p orts tha t eac h MA C ad dr ess is al lowed to acc ess . Y o u mu st al so inc lude the M A C addre sse s of any route rs and swit ches that are conne cted to an y secure ...

  • Nortel Networks 10BASE-T - page 179

    Using th e Console Interfac e 309985-C Re v 00 3-37 Figure 3 -15. MAC Address Security T able Scree n Ta b l e 3 - 1 1 descri bes the M A C Address Securi ty Conf iguration sc reen f ields. Note: The foll o wing screen sho ws a n exampl e of typical user input in b oldface type. MAC Address Security Table Find an A ddress: [ 00-00- 00-00-00-00 ] MA ...

  • Nortel Networks 10BASE-T - page 180

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-38 3099 85-C Rev 00 T able 3-11. MA C Address S ecurity T able Screen Fields Field Des cription Find an Ad dress Al lows y ou to search fo r a speci fic MA C address that i s used in an y of the MA C Addre ss Security T abl e screen s. MA C Address Allo ws y ou to spec ify up to 448 MA C address es th ...

  • Nortel Networks 10BASE-T - page 181

    Using th e Console Interfac e 309985-C Re v 00 3-39 VLAN Configuration Menu The VLAN Conf iguration Menu scree n ( Figure 3-16 ) allows yo u to se lect the appropri ate scr een to conf igure up to 64 VLANs (VLAN 1 is port-bas ed, by defa ult). Y ou can c onf igure as many as 63 prot ocol-bas ed VLANs, with up t o 15 dif ferent protoc ols. The numbe ...

  • Nortel Networks 10BASE-T - page 182

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-40 3099 85-C Rev 00 Figure 3 -16. VLAN Configuration Menu Scree n Ta b l e 3 - 1 2 descri bes the VLAN Con f iguration Menu scre en options . T able 3-12. VLAN Configuration Men u Screen Options Option Descrip tion VLAN Configuration ... Displ a ys the VLA N Confi guratio n screen (see “ VLAN Config ...

  • Nortel Networks 10BASE-T - page 183

    Using th e Console Interfac e 309985-C Re v 00 3-41 VLAN Configuration The VLAN Conf iguration screen ( Figure 3- 17 ) allo ws you to assi gn VLAN port members hips t o standal one or sta cked uni t ports . Y ou can also cr eate por t-based VLANs and prot ocol-based VLANs: • Port-ba sed VLANs allo w you to e xplicitly conf igure switc h ports as ...

  • Nortel Networks 10BASE-T - page 184

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-42 3099 85-C Rev 00 Figure 3 -17. VLAN Configuration Screen Ta b l e 3 - 1 3 descri bes the VLAN Conf iguration s creen f ields. T able 3-13. VLAN Configuration Screen Fields Field Des cription Create VLAN Allo ws y ou to s et up or vi ew c onfigured V LAN w orkgroups . Enter th e num ber of the ne w ...

  • Nortel Networks 10BASE-T - page 185

    Using th e Console Interfac e 309985-C Re v 00 3-43 Delete VLAN Allows y ou to delete a specifi ed VLAN, e xcept the a ssigned mana gement VLAN (see Ma nagement VLAN fiel d). Enter the numbe r of the VLAN yo u want to dele te, then pres s [Enter], o r use t he space bar to togg le through the se lection until y ou reach th e specifi c VLAN y ou w a ...

  • Nortel Networks 10BASE-T - page 186

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-44 3099 85-C Rev 00 User -defined PID Al low s you t o create y our o wn u ser-define d protocol-bas ed VLAN wh ere y ou speci fy the Protoco l Identifie r (PID) fo r the VLAN. T o set this field, the VLAN Stat e field m ust be set t o Inactiv e (some rest rictions appl y , see “ Use r-Defined Proto ...

  • Nortel Networks 10BASE-T - page 187

    Using th e Console Interfac e 309985-C Re v 00 3-45 Predefined Pr otocol Identifier (PID) Descri ption Ta b l e 3 - 1 4 def ines t he standar d protocol-b ased VLANS an d PID types t hat are support ed by the Bay Stack 41 0-24T switc h: T able 3-14. Pred efined Protocol I dentifier ( PID) PID Name Encaps ula tion PID V alue (hex) VLAN T ype Ip Ethe ...

  • Nortel Networks 10BASE-T - page 188

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-46 3099 85-C Rev 00 User -Define d Pr otocol Ident ifier ( PID) Des cription In add iti on to t he sta ndard pr edef ined p rotocols , user -def ined protoco l-based VLANs are sup ported. For u ser -def ined protocol -based VLANs, yo u speci fy the Proto co l Ide ntifier (PID ) for the VLA N. A ny fr ...

  • Nortel Networks 10BASE-T - page 189

    Using th e Console Interfac e 309985-C Re v 00 3-47 Gigabit P or ts and Ba yStac k 410-24 T Switch P or ts Restriction Gigabi t ports a nd the Ba yStack 410- 24T switch p orts d o not ha ve the ab ility t o assign i ncoming unt agged frame s to a protoc ol-based VLAN. T o allo w gigabi t ports a nd BaySta ck 410-24T s witch port s to pa rticipa te ...

  • Nortel Networks 10BASE-T - page 190

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-48 3099 85-C Rev 00 Figure 3 -18. VLAN P or t Configuration Screen Ta b l e 3 - 1 6 descri bes the VLAN Por t Conf igurat ion scree n fi elds. T able 3-16. VLAN P or t Configuration Screen Fields Field Des cription Unit Allo ws you t o select the unit n umber (wh en sta cking is confi gured) t o vie w ...

  • Nortel Networks 10BASE-T - page 191

    Using th e Console Interfac e 309985-C Re v 00 3-49 Filter Unt ag ged Frames Sets this por t to filt er (dis card) all re ceiv ed untagged frames . Restriction: If thi s por t is a gigabit port or a por t that is a protoco l-based VLAN memb er , y ou ca nnot se t this field v alue to No . This res triction al so applies if th is po r t is a trunk m ...

  • Nortel Networks 10BASE-T - page 192

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-50 3099 85-C Rev 00 VLAN Displa y b y P or t The VLAN Displa y by Port s creen ( Fi gure 3-17 ) al lo ws you t o vie w VLAN charact eristi cs ass ociated wi th a spec if ied switch port. Choose VLAN Disp lay by Po rt (or pr ess d) f rom the VLAN Conf iguration Menu screen t o open the VLAN Displa y by ...

  • Nortel Networks 10BASE-T - page 193

    Using th e Console Interfac e 309985-C Re v 00 3-51 Ta b l e 3 - 1 7 descri bes the VLAN Dis play by Port screen f ields. T raffi c Class Confi guration The Traf fic Cla s s Co n figurat ion sc ree n ( Figure 3-20 ) al lo ws you t o assign a Lo w or High t raf fic clas sif icat ion to an y of eight (0 t o 7) user_p riorit y v alues assigned to a re ...

  • Nortel Networks 10BASE-T - page 194

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-52 3099 85-C Rev 00 Figure 3 -20. T raffic Class Configuration Screen Ta b l e 3 - 1 8 des cr ibe s th e Traff ic Cla ss Co nfigur atio n scr een fiel ds. T able 3-18. T raff ic Class Co nfiguratio n Screen Fields Field Des cription User Priority Column head er f or the rea d-only fie lds that i ndica ...

  • Nortel Networks 10BASE-T - page 195

    Using th e Console Interfac e 309985-C Re v 00 3-53 P or t Configuration The Port Co nfi guratio n screen ( Figu re 3-21 and Figure 3- 22 ) all ows you to conf igure specif ic switch ports or al l switch p orts. Y ou can e nable or di sable t he port st atus of speci f ied switch ports , set (opti onal) MD A ports to au tone g otiat e for the high ...

  • Nortel Networks 10BASE-T - page 196

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-54 3099 85-C Rev 00 Figure 3 -22. Port Configuration S creen (2 of 2) Ta b l e 3 - 1 9 descri bes the Po rt Conf iguration s creen f ields. T able 3-19. P or t Configuration Screen F ields Field Des cription Unit Allo ws you t o select the unit n umber (wh en sta ck ing is confi gured) t o vie w or co ...

  • Nortel Networks 10BASE-T - page 197

    Using th e Console Interfac e 309985-C Re v 00 3-55 High Speed Flow Control Configuration The High Spe ed Flo w Control Conf igura tion screen ( Figure 3 -23 ) allo ws you to set the port par ameters fo r an y giga bit MD A that may be conf igure d in a sta ck conf iguration. Status Allo ws you t o disa ble any o f the s witch po r ts. Y ou can a l ...

  • Nortel Networks 10BASE-T - page 198

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-56 3099 85-C Rev 00 Choose High Speed Flo w Control Conf iguration (or press h ) from the Switch Conf igurat ion Menu s creen to op en the High Speed Flo w Control Conf iguration scr een. Figure 3 -23. High Speed Flow Contro l Configuration Screen Ta b l e 3 - 2 0 descri bes the Hig h Speed Flo w Cont ...

  • Nortel Networks 10BASE-T - page 199

    Using th e Console Interfac e 309985-C Re v 00 3-57 Choosing a High Speed F low Contr ol Mo de The High Spe ed Flo w Control featur e allo ws you to cont rol traf fic an d a v oid congest ion on the g igabit full-dup le x link. If t he recei ve port b uf fer becomes fu ll, the gigabit MD A issues a flo w-control s ignal to the de vice at the other ...

  • Nortel Networks 10BASE-T - page 200

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-58 3099 85-C Rev 00 Symmetric Mode This mode a llo ws bot h the gig abit MD A port an d its li nk partner to send flo w-contro l pause frames to eac h other . When a paus e frame is recei ved (by either the gig abit MD A port or i ts link par tner), t he port su spends transmiss ion of frames f or a n ...

  • Nortel Networks 10BASE-T - page 201

    Using th e Console Interfac e 309985-C Re v 00 3-59 Figure 3 -24. MultiLink T runk Configuration Menu Screen Ta b l e 3 - 2 1 descri bes the Mul tiLink T r unk Config uration Men u scree n options. T able 3-21. MultiLink T runk Configuration Menu S creen Options Option Descrip tion MultiLink T runk Configuration.. . Displ a ys th e MultiLi nk T r u ...

  • Nortel Networks 10BASE-T - page 202

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-60 3099 85-C Rev 00 MultiLink T r unk Configurati on Screen The MultiLi nk T runk Conf igurat ion scree n ( Figu re 3 -25 ) allo ws you to conf igure up to si x trunk s in a standa lone swi tch or stac k. In a s tack conf iguration, t runk members can be dis trib uted between an y of the unit s within ...

  • Nortel Networks 10BASE-T - page 203

    Using th e Console Interfac e 309985-C Re v 00 3-61 Figure 3 -25. MultiLink T runk Configuration Screen Ta b l e 3 - 2 2 descri bes the Mult iLink T runk Conf iguration sc reen f ields. T able 3-22. MultiLink T runk Configuration Scree n Fields Field Desc ription Tr u n k Column head er f or th e read-onl y fields i n this s creen. The re ad-onl y ...

  • Nortel Networks 10BASE-T - page 204

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-62 3099 85-C Rev 00 MultiLink T r unk Utilizat ion Scree n The MultiLi nk T runk Util izat ion sc reen ( Figur e 3- 26 and Figure 3- 27 ) allo ws you to monito r the per centage of bandwidth u sed by conf igured trunk members. Y ou can choos e the type of traf f ic to monit or . Figure 3- 26 sho ws an ...

  • Nortel Networks 10BASE-T - page 205

    Using th e Console Interfac e 309985-C Re v 00 3-63 Figure 3-26. MultiLink T runk Utilization Screen ( 1 of 2) MultiLink T runk Uti lization Trunk Tr affic Ty pe Unit/P ort Last 5 Minutes Last 30 Mi nutes Last Hour ----- -- -------- --- -- ------- -- -------- ---- ------ -------- - -------- - 1 [ Rx and T x ] 3/6 90. 0% 70.0% 90 .0% 3/7 20.0% 5 5.0 ...

  • Nortel Networks 10BASE-T - page 206

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-64 3099 85-C Rev 00 Figure 3-27. MultiLink T runk Utilization Screen ( 2 of 2) Ta b l e 3 - 2 3 descri bes the Mul tiLink T r unk Utilization s creen fi elds. T able 3-23. MultiLink T runk Utilization S creen Fields Field Des cription Tr u n k Column heade r fo r the read-only fields in this screen. T ...

  • Nortel Networks 10BASE-T - page 207

    Using th e Console Interfac e 309985-C Re v 00 3-65 P or t Mirroring Configuration The Port Mi rroring Conf igur atio n screen allo ws you to conf igur e a specif ic switch port to monitor up to tw o specif ied ports or two MA C addresse s. Y ou ca n specify port-ba sed monitor ing or add ress-bas ed monitori ng. In a stac k conf igur ation, you ca ...

  • Nortel Networks 10BASE-T - page 208

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-66 3099 85-C Rev 00 Figure 3 -28. P or t Mirror ing Configuration Screen Ta b l e 3 - 2 4 descri bes the Po rt Mir roring Conf iguration s creen f ields. T able 3-24. P or t Mirr oring Configuration Screen Fields Field Des cription Monitoring M ode Allo ws y ou to select an y one of six po r t-based m ...

  • Nortel Networks 10BASE-T - page 209

    Using th e Console Interfac e 309985-C Re v 00 3-67 Monitor Unit/P ort Indic ates the por t n umber (of t he speci fied unit) that is de signa ted as the monitor por t. Def ault Zero-length string Range 1 to 8 / 1 to 28 ( depending on mo del type ) Unit/P or t X Indicates one of the por ts (of the spec ified unit ) that wil l be mon itored b y th e ...

  • Nortel Networks 10BASE-T - page 210

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-68 3099 85-C Rev 00 Ta b l e 3 - 2 5 descri bes the v arious moni toring mode s a v ailabl e from the Port Mirrori ng Conf igurat ion scree n. T able 3-25. Monitoring Modes Field s Description P or t-based: Disab led Def ault for this f eature. -> P or t X Monitor a ll tr affic rece iv ed b y P or ...

  • Nortel Networks 10BASE-T - page 211

    Using th e Console Interfac e 309985-C Re v 00 3-69 Rate Limiting Configuratio n The Rate Limi ting Conf iguration s creen a llo ws you to limit th e forw ar ding ra te of broadcas t and IP multicas t pack ets. Figures 3-2 9 and 3-30 sho w sam ple rate lim iting value s fo r the two Ra te Li miti ng Conf igurat ion screens. Choose Rate Limiti ng Co ...

  • Nortel Networks 10BASE-T - page 212

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-70 3099 85-C Rev 00 Figure 3 -30. Rate Limiting Configuration Screen ( 2 of 2) Y ou can use t his scree n to vie w the perce ntage of e ither pa cket t ype (or bot h packe t types) recei ved on e ach port. When the v olume of either packet type is h igh, placi ng se vere stra in on the netwo rk (ofte ...

  • Nortel Networks 10BASE-T - page 213

    Using th e Console Interfac e 309985-C Re v 00 3-71 Ta b l e 3 - 2 6 descri bes the Rat e Limiting Conf igurati on screen f ields. T abl e 3-26 . R at e Lim iti ng C o nf i g u r a t i o n Sc r ee n Fi el d s Field De scription Unit Appea rs only if the s w itch is participatin g in a stac k configu rati on. The fiel d allo ws y ou to sele ct the n ...

  • Nortel Networks 10BASE-T - page 214

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-72 3099 85-C Rev 00 IGMP Configuration Menu The IGMP Conf iguration Menu sc reen ( Fi gure 3-31 ) al lo ws you t o select the appropri ate scr een to optimize I P multicas t packe ts in a bridged Ethernet en viro nmen t (se e “ IGMP Snooping ” on page 1- 54 ). Choose IGMP Conf iguration ( or press ...

  • Nortel Networks 10BASE-T - page 215

    Using th e Console Interfac e 309985-C Re v 00 3-73 IGMP Configurat io n Figure 3- 32 sho ws an exampl e of the IGMP Conf igura tion screen i n a stack ed conf iguration. When installed a s a standa lone s witch, the screen doe s not d isplay the Unit # f ield desi gnation. In this exa mple, swi tch ports 8 and 14 of unit 1, p orts 2 an d 6 of u ni ...

  • Nortel Networks 10BASE-T - page 216

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-74 3099 85-C Rev 00 Figure 3 -32. IGMP Configuration Screen Ta b l e 3 - 2 8 descri bes the IGMP Con fi guration screen f ields. T able 3-28. IGMP Configuration Scr een Fields Field Desc ription VLAN Allow s y ou to se t up or vie w IGMP con figur ations on specified VLANs . Y ou can use the spac e ba ...

  • Nortel Networks 10BASE-T - page 217

    Using th e Console Interfac e 309985-C Re v 00 3-75 Snooping Allo ws you to enab le or disab le IGMP Snooping. This fiel d aff ects all VLANs (f or e xample, i f yo u disab le Snooping f or t he VLAN specifie d in the s creen ’ s VLAN field, Snoopin g is disab led for ALL VLANs). Def ault Enabl ed Range Enab led, D isab led Pr o xy Allows the s w ...

  • Nortel Networks 10BASE-T - page 218

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-76 3099 85-C Rev 00 Configuring P orts as Static Router P or ts If you specify a port as a St atic Ro uter Por t in t he IGMP Conf igur ation s creen, that p ort w ill re c eiv e all t he IP m ulti cast- rela te d in fo rmat ion (s uch a s, Ho st Membersh ip Report, Ho st Me mbership Quer y , and IP M ...

  • Nortel Networks 10BASE-T - page 219

    Using th e Console Interfac e 309985-C Re v 00 3-77 If you ar e abso lutely s ure that it is re quired for your p articul ar le gac y router , configur e on l y the ports that a re toward s t he legacy r ou ter as the stat ic rou ter ports. Th is actio n will av oid misconf igurat ions which can pre vent yo u from receiving IG MP mult ic ast t raff ...

  • Nortel Networks 10BASE-T - page 220

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-78 3099 85-C Rev 00 Figure 3 -33. Multicast Gr oup Member ship Screen Ta b l e 3 - 2 9 descri bes the Multicast Grou p M em be rship scree n opt ions. T able 3-29. Multicast Gr oup Membership Screen Option s Option Descrip tion VLAN Allo w s y ou to vie w IP multic as t g ro up addres se s on sp ec if ...

  • Nortel Networks 10BASE-T - page 221

    Using th e Console Interfac e 309985-C Re v 00 3-79 P or t Statistics The P ort St atis tic s scre en ( Figure 3-34 ) allows you to view de taile d in fo rmat ion about an y switch port in a stack ed or standalo ne conf iguration. The sc reen is di vided i nto tw o secti ons (Recei v ed a nd T r ansmitted) s o that y ou can compa re and e v aluate ...

  • Nortel Networks 10BASE-T - page 222

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-80 3099 85-C Rev 00 Ta b l e 3 - 3 0 descri bes the Por t Stati stics sc reen f ields. Note: In a stack ed conf iguration , the Port Stat istics scr een appears in a s lightly different f orma t whe n the p ort se lect ed in th e Un it/Po rt field is configu red wi th a giga bit MD A. T able 3-30. P o ...

  • Nortel Networks 10BASE-T - page 223

    Using th e Console Interfac e 309985-C Re v 00 3-81 P ac kets 64 b ytes Receiv ed col umn: Indi cates the total n umber of 6 4-by te pac k ets recei ve d on this por t. T ransmitte d colum n: Indicat es the tota l n umber of 6 4-by te pac k ets tr ansmitt ed succes sfu lly o n th is por t. 65-1 27 bytes Receiv ed column: I ndicates the total n umbe ...

  • Nortel Networks 10BASE-T - page 224

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-82 3099 85-C Rev 00 Collisions In dicat es the tota l n umber of c ollisio ns detect ed on t his por t. Single Collisions Indicates the total n umber of pac ke ts that w ere tr ansmitte d succe ssfully on this port after a singl e collis ion. Multiple Co llisions Indicates the total n umber of pac ke ...

  • Nortel Networks 10BASE-T - page 225

    Using th e Console Interfac e 309985-C Re v 00 3-83 A TM Configura tion Menu The A TM Conf igurati on Menu scree n ( Figu re 3 -35 ) allo ws you to se lect the appropri ate scr een to conf igure or upgrade you r BayStack 4 50-2M3/2S3 MD A. Choose A TM Conf iguration (or p ress a) fro m the Switch Co nf iguratio n Menu screen t o open the A TM Confi ...

  • Nortel Networks 10BASE-T - page 226

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-84 3099 85-C Rev 00 Bef ore Configuring Y our A TM MD A The BayStac k 450-2 M3/2S3 MD A has tw o physic al OC-3 po rts (A1 an d A2). Each of t he physi cal ports are logi cally mappe d to four LAN emulation c lients (LECs) by d efaul t (LEC1 to LEC4). The LECs ca n be t hought of a s virtu al ports t ...

  • Nortel Networks 10BASE-T - page 227

    Using th e Console Interfac e 309985-C Re v 00 3-85 Ta b l e 3 - 3 1 descri bes the A TM Co nfi guration Menu scr een option s. LEC Configuration The LEC Conf iguration scr een ( Figure 3 -36 ) allo ws you to spec ify para meters and port assignment s for the LEC virt ual port s. When you conf igure your LEC vi rtual po rts, y ou must also use the ...

  • Nortel Networks 10BASE-T - page 228

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-86 3099 85-C Rev 00 Figure 3 -36. LEC Configuration Screen Ta b l e 3 - 3 2 descri bes the LEC Conf iguration screen f ields. T able 3-32. LEC Configuration Screen Fields Field Des cription Unit Allo ws you t o select anothe r stac k un it that is configure d with a n A TM MD A. T o view or co nfigure ...

  • Nortel Networks 10BASE-T - page 229

    Using th e Console Interfac e 309985-C Re v 00 3-87 LEC Status Allo ws you to e nab le or di sab le the s elected LEC . Def ault Disab le Rang e Disa ble, Enable LEC State This re ad-o nly f i eld d isplays the curr ent st atus of the sele c ted LEC. Def ault Disab led Rang e Disa bled, Id le, Operat iona l, Un known EL AN Na me Allow s y ou to ent ...

  • Nortel Networks 10BASE-T - page 230

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-88 3099 85-C Rev 00 A TM MD A Configuration The A TM MD A Configur ation sc reen ( Fig ure 3-37 ) al lo ws you t o set up A TM conf iguration parame ters for your Bay Stack 450-2 M3/2S3 MD A. Certain fi elds in t his scre en may requi re you to r eset the swi tch if yo u change the curre nt or default ...

  • Nortel Networks 10BASE-T - page 231

    Using th e Console Interfac e 309985-C Re v 00 3-89 Figure 3 -37. A TM MD A Configuration Screen Ta b l e 3 - 3 3 descri bes the A TM MD A Confi guratio n screen f ields. T able 3-33. A TM MD A Configuration Screen Fields Field Des cription Unit Allo ws you t o select anothe r stac k un it that is configure d with a n A TM MD A. T o view or co nfig ...

  • Nortel Networks 10BASE-T - page 232

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-90 3099 85-C Rev 00 P or t A1 MA C Addr ess Re ad-on ly fie ld t hat in dic ates t he p or t A1 MAC addre ss of the A TM MDA that i s currently select ed. P or t A2 MA C Addr ess Re ad-on ly fie ld t hat in dic ates t he p or t A2 MAC addre ss of the A TM MDA that i s currently select ed. LEC F ail Ov ...

  • Nortel Networks 10BASE-T - page 233

    Using th e Console Interfac e 309985-C Re v 00 3-91 A TM MD A Software Downl oad The A TM MD A Sof twa re Downloa d scre en ( Figure 3-38 ) al lo ws you to u pgrade your BaySt ack 450-2M3/2 S3 MD A with the latest f irmware code. Choose A TM MD A Softw ar e Do wnload (or pr ess f) from the A TM Conf iguration Menu s c reen to open th e A TM MD A S ...

  • Nortel Networks 10BASE-T - page 234

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-92 3099 85-C Rev 00 Figure 3 -38. A TM MD A Software Download Screen Ta b l e 3 - 3 4 descri bes the A TM MD A Softw are Do wnload screen f ields. T able 3-34. A TM MD A Softwar e Download Sc reen Field s Field Des cription Imag e Fi le na me The softw are im age load file name . Def ault Zero-leng th ...

  • Nortel Networks 10BASE-T - page 235

    Using th e Console Interfac e 309985-C Re v 00 3-93 Start TFTP transfer of MD A image Specifie s wheth er to start the dow nload of the Ba yStack 450-2M3/ 2S3 MD A softw are im age (def ault is No). Use the s pacebar t o toggle th e selec tion to Y es . Pres s [Ent er] to ini tia t e th e so ft war e downl oad pr oce s s. T o ensure that the do wnl ...

  • Nortel Networks 10BASE-T - page 236

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-94 3099 85-C Rev 00 Console/Comm P or t Configuration The Console /Comm Port Conf iguration screen ( Figure 3 -39 ) allo ws you to conf igure and mo dify the consol e/comm port parameter s and security features of a standal one switch or an y part icipati ng switch i n a stack conf igur ation. Choose ...

  • Nortel Networks 10BASE-T - page 237

    Using th e Console Interfac e 309985-C Re v 00 3-95 Comm P or t Stop Bits A rea d-only fie ld that in dicates the cur rent co nsole/co mm po r t stop bit s etting. Cons ole Por t Spee d Allows y ou to se t the cons ole/c omm port baud rate to ma tch the ba ud r ate of the con s ole t er mi nal . Def ault 9600 Baud Range 2400 Baud, 48 00 Baud, 96 00 ...

  • Nortel Networks 10BASE-T - page 238

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-96 3099 85-C Rev 00 Cons ole S wit ch P ass w ord T ype Enables pa ss wo rd protec tion f or accessing the c onsole i nterf ace (C I) of a standalon e s witch throug h a co nsole terminal. If y ou set this fiel d to Re quired, y ou can use th e Logout option to restrict ac cess to the CI. The reafter ...

  • Nortel Networks 10BASE-T - page 239

    Using th e Console Interfac e 309985-C Re v 00 3-97 TELNET Stac k P ass w ord T ype Enables pa ss wo rd protec tion f or accessing the c onsole i nterf ace (C I) of any par ticipati ng s witch in a sta ck configur atio n , thro ug h a T ELNET sess i on. If y ou set this fiel d to Re quired, y ou can use th e Logout option to restrict ac cess to the ...

  • Nortel Networks 10BASE-T - page 240

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-98 3099 85-C Rev 00 Attention: Si v ous changez le s mots d e passe par d é f a ut du sy st è me, assurez-v ous de bien noter vo s nouv eaux mots de passe et de les c onserver dans un e ndroit s û r . Si v ous pe rdez v os nouv eaux mo ts de p asse, v ous ne pourrez pl us acc é der à v o tre i nt ...

  • Nortel Networks 10BASE-T - page 241

    Using th e Console Interfac e 309985-C Re v 00 3-99 Console Read-Write Stack Passwor d When th e Console Switch P ass word field is set to Local P ass word (f or TELNET , fo r Console , or f or Both), th is field allo ws read-w rite pass word acc ess to the CI of any pa r ticipat ing s witch in a stac k configur a tio n . Users can log in to the CI ...

  • Nortel Networks 10BASE-T - page 242

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-100 3099 85-C Rev 00 Attenzione: In ca so di mo difica delle pa ss wo rd prede finite nel sist ema, ass icurar si d i a nno tare le nuove password e di cons er v ar le i n un lu ogo si curo. Nel caso in cui le nu ov e pas s word vengan o di menti cate, n on sar à possibile accedere all'inte rf a ...

  • Nortel Networks 10BASE-T - page 243

    Using th e Console Interfac e 309985-C Re v 00 3-10 1 Ren u mber Stac k Unit s The Renumb er St ac k Uni ts scr een ( Figure 3 -40 ) allo ws you to re numbe r the unit s conf igured in the stack. When select ed, this option iden tifi es the unit number of each sta ck unit by lighting the cor responding number of port Link LEDs on each un it for a p ...

  • Nortel Networks 10BASE-T - page 244

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-102 3099 85-C Rev 00 Ta b l e 3 - 3 6 descri bes the Renu mber Sta ck Units sc reen opti ons: T able 3-36. Renumber St ack Units Screen Options Option Descrip tion Current Unit Number Read-only fields l isting th e current u nit num ber of eac h of the c onfigur ed stac k units . The entries in thi s ...

  • Nortel Networks 10BASE-T - page 245

    Using th e Console Interfac e 309985-C Re v 00 3-10 3 Hard w are Un it In format ion The H a rdwa re Un it Info rmat ion scree n ( Figure 3-41 ) li sts the switch mo dels, includi ng an y inst alled MD A and Casca de modules, t hat are c onf igured in your standal one or stack conf igura ti on. Choo se Di spl ay Hard ware U nit s ( or p ress h ) fr ...

  • Nortel Networks 10BASE-T - page 246

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-104 3099 85-C Rev 00 Choo se Span nin g T ree Co nfigura tio n (or p res s p) fr om the m ain m enu to o pen th e Spanning T ree Co nfi guration Menu screen. Figure 3 -42. Spanning T ree Configuration Men u Screen Ta b l e 3 - 3 7 descri bes the Spa nning T ree Conf iguration Menu sc reen o ptions: T ...

  • Nortel Networks 10BASE-T - page 247

    Using th e Console Interfac e 309985-C Re v 00 3-10 5 Spanning T ree P or t Configuration The Spanni ng T ree Port Conf igur ation sc reen all o ws you to conf igure in di vidual switch po rts or al l switch ports for part icipati on in the s pannin g tree. Figure 3- 43 and Figure 3-44 sho w sample por t conf igurations for the tw o Spanning T ree ...

  • Nortel Networks 10BASE-T - page 248

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-106 3099 85-C Rev 00 Figure 3 -44. Spanning T ree P or t Configuration Screen (2 of 2) Ta b l e 3 - 3 8 descri bes the Spa nning T ree Port Confi guratio n screen f ields. T able 3-38. Spanning T ree P ort Configuration Screen Fields Field De scription Unit This field appears only if the s witch is pa ...

  • Nortel Networks 10BASE-T - page 249

    Using th e Console Interfac e 309985-C Re v 00 3-10 7 P articipation Allo ws you to config ure any (or all) o f the s witch ports for s panning tree participation. When an i ndivi dual p or t is a trun k me mber (s ee T runk field ), cha nging this s etting f or one of th e trunk memb ers chang es the setting f or all m embers of that trunk. Y ou s ...

  • Nortel Networks 10BASE-T - page 250

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-108 3099 85-C Rev 00 Display Spanning T ree Switch Settings The Spanni ng T ree Switch Settings screen ( Figur e 3- 45 ) allo ws you to vie w spanning tree parameter v alu es for the BayS tack 410-2 4T switch. Choose Disp lay Spa nning T ree Switch Setti ngs (or pr ess d) f rom the Spann ing T ree Con ...

  • Nortel Networks 10BASE-T - page 251

    Using th e Console Interfac e 309985-C Re v 00 3-10 9 Ta b l e 3 - 3 9 descri bes the Spa nning T ree Switch Set tings paramet ers. T able 3-39. Spanning T ree Switch Settings P arameters P arameter D escription Bridge Priority Indica tes the m anagemen t-assigne d priority v alue of the b ridge ID in h e xadecim al notatio n, whi ch is the m ost s ...

  • Nortel Networks 10BASE-T - page 252

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-110 3099 85-C Rev 00 Forwar d Dela y Indica tes the F orwar d Dela y parame ter v alue tha t the ro ot bridge is c urrently u sing. This v alue specifi es the am ount of time that the bridge por ts remain in the Li stening a nd Learning state s bef ore entering the F orwarding state . Note t hat the r ...

  • Nortel Networks 10BASE-T - page 253

    Using th e Console Interfac e 309985-C Re v 00 3-11 1 TELN ET /S N M P Ma na ger List Config u rat io n The TELNET/ SNMP Manage r List Conf igurati on screen ( Fi gure 3-46 ) allows you to communi cate wit h the BaySta ck 410-24T s witch from a remote cons ole termina l. Y ou can ha ve up to four ac ti v e TELNET sessi ons at one time. Choose TELNE ...

  • Nortel Networks 10BASE-T - page 254

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-112 3099 85-C Rev 00 T able 3-40. TELNET/SNMP M anager List Con figuration Screen F ields Field De scription TELNET Access Allo ws rem ote access to the CI through a T ELNET ses sion. Def ault Enab led Range Enabl ed, Dis abl ed Login Timeout Spec ifies the amount o f time y ou hav e to enter the co r ...

  • Nortel Networks 10BASE-T - page 255

    Using th e Console Interfac e 309985-C Re v 00 3-11 3 Allow ed S our ce IP Address Specifi es up to 1 0 user-as signed ho st IP addre sses that are allo wed T ELNET acc ess to the CI . Def ault 0.0.0.0 (no IP address as signe d) Range Fo ur-octe t dotted-de cima l notation , where e ach octet is rep resented as a dec imal v alue, s eparate d b y a ...

  • Nortel Networks 10BASE-T - page 256

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-114 3099 85-C Rev 00 Softwa re D ownload The Softw are Do wnload scree n ( Figure 3-47 ) allo ws you to re vise th e BayStack 410-2 4T switch so ftware image t hat is l ocated in non v olatile flas h memory . T o do wnload the BaySt ack 410-24T switch sof tware i mage, you need a prop erly conf igured ...

  • Nortel Networks 10BASE-T - page 257

    Using th e Console Interfac e 309985-C Re v 00 3-11 5 Choo se So ftwa re Downl oad (o r pr ess f) fr om th e ma in me nu to o pe n the S of tware Do wnload scr een. Figure 3 -47. So ftware Download Scr een Ta b l e 3 - 4 1 descri bes the Sof twa re Do wnload screen f ields. T able 3-41. Soft ware Download S creen Fie lds Field De scription Imag e F ...

  • Nortel Networks 10BASE-T - page 258

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-116 3099 85-C Rev 00 LED Indications Duri ng the Download Process The soft ware do wnload p rocess au tomatical ly compl etes with out user interv ention. The pr ocess e rases the con tents of f lash memory and re places it wit h a ne w software i mage. Be caref ul not to int err upt th e do wnload pr ...

  • Nortel Networks 10BASE-T - page 259

    Using th e Console Interfac e 309985-C Re v 00 3-11 7 During th e do wnload process, t he BayStack 410-24T swit ch is not operati onal. Y ou can monitor the prog ress of t he do wnload pr ocess b y observin g the LED indicat ions. Ta b l e 3 - 4 2 descri bes the LED i ndicatio ns duri ng the sof tware do wnload pr ocess. Note: The LED indicati ons ...

  • Nortel Networks 10BASE-T - page 260

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-118 3099 85-C Rev 00 Configurat ion File The Conf iguration Fil e Do wnload/ Upload scre en ( Figur e 3-48 ) al lo ws you t o store y our switch /stack co nf iguratio n paramet ers on a TF TP serv er . Y ou can retr ie v e the con fi guration parameter s of a sta ndalone swi tch or an e ntire stack a ...

  • Nortel Networks 10BASE-T - page 261

    Using th e Console Interfac e 309985-C Re v 00 3-11 9 Requirements • The Conf iguration Fil e feature can be use d only to co py stan dal one swit c h conf iguration p ar ameters to other standalon e switc hes or to c opy sta ck conf iguration p ar ameters to other stac k conf igurat ions . F or e xample, you ca nnot dupli cate the conf igurati o ...

  • Nortel Networks 10BASE-T - page 262

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-120 3099 85-C Rev 00 • A conf iguration f ile obtained fr om a standa lone switc h can be use d only to conf igure other sta ndalon e switches that ha ve the same softw are re vision and model type as the don or standa lone switc h. Y ou can check your switc h ’ s curren t soft ware r e vision usi ...

  • Nortel Networks 10BASE-T - page 263

    Using th e Console Interfac e 309985-C Re v 00 3-12 1 Display Even t Log This sec tion desc ribes the v arious functio ns of the E ve nt Log scre en ( Figure 3- 49 ). When the swi tch is pa rt of a st ack co nfi guratio n, the Ev ent Lo g screen di splay s only the dat a for the specif ic unit you are connec ted to th rough the Co nsole/ Comm port. ...

  • Nortel Networks 10BASE-T - page 264

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-122 3099 85-C Rev 00 The E vent Lo g s cre en provi des th e fo ll owing inf orma tion : • Softwar e download: In dicat es th e new soft ware version . • A uthen tication failur e: Indicate s any attem pted SNMP get or set ac cess t hat specif ied an in v alid communit y string. • TELNET session ...

  • Nortel Networks 10BASE-T - page 265

    Using th e Console Interfac e 309985-C Re v 00 3-12 3 Write Threshold T o e xtend t he life time of the e vent lo g ’ s fl ash m em ory , a w r ite t hresh old is set fo r each ev ent en te red in fla sh me mory . Th e wr it e th resho ld is 2 0 entr ies for eac h ev ent. If any ev ent exc ee ds t he wr ite t hr esh o ld, an ev ent e ntry i s dis ...

  • Nortel Networks 10BASE-T - page 266

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-124 3099 85-C Rev 00 Sa ve Current Sett ings The Sa v e Current Settings op tion (acc essed from the mai n menu) allo ws you to sa v e your cur rent c onf igurati on settin gs without r esetting your s witc h or stac k . This opt ion is fol lo wed by a screen pr ompt th at preced es the act ion. Enter ...

  • Nortel Networks 10BASE-T - page 267

    Using th e Console Interfac e 309985-C Re v 00 3-12 5 Figure 3 -53. Self-T e st Screen After Resetting th e Switch Note: The Self-T est screen fo r a switc h that is partici pating i n a sta ck conf iguration i ncludes an addition al tes t: Cascade SRAM test. BayStack 4 10-24T Se lf-Te st CPU RAM tes t ... P ass ASIC addres sing tes t ... Pas s ASI ...

  • Nortel Networks 10BASE-T - page 268

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-126 3099 85-C Rev 00 Figure 3 -54. Nortel Networks Logo Screen Upon succ essf u l co m pleti on of t he p ower-up s e lf-te sts, the sw itch i s rea d y fo r normal ope ration. T o acces s the BaySta ck 410-24T mai n menu, press [Ctrl] -Y . Note: The Nortel Netw orks logo scree n for your swit ch will ...

  • Nortel Networks 10BASE-T - page 269

    Using th e Console Interfac e 309985-C Re v 00 3-12 7 Reset to Default S ettings The Reset to Defa ult Sett ings opti on (acces sed from t he main menu) allo ws you t o reset a sta nda lo ne switc h, a spec ific uni t in a st ack configur atio n, or an e ntire stack, and r eplace al l conf igured switc h parame ters wit h the defa ult v alues. T o ...

  • Nortel Networks 10BASE-T - page 270

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-128 3099 85-C Rev 00 The resul ts of th e self -test a re displ ayed br iefly (5 or 10 secon ds) in the Self- T est scr ee n ( Figure 3-55 ), whic h is fo ll owed by th e No rtel N etwork s logo scr ee n ( Figure 3- 56 ). Figure 3 -55. Self-T est Screen After Resetting to Default Settin gs Note: The S ...

  • Nortel Networks 10BASE-T - page 271

    Using th e Console Interfac e 309985-C Re v 00 3-12 9 Figure 3 -56. Nortel Networks Logo Scree n After Resetting to Default Settings Upon succ essf u l co m pleti on of t he p ower-up s e lf-te sts, the sw itch i s rea d y fo r normal ope ration. T o acces s the BaySta ck 410-24T mai n menu, press [Ctrl] -Y . Note: The Norte l Netw o rks logo sc re ...

  • Nortel Networks 10BASE-T - page 272

    Using the BayS tack 410 -24T 10BA SE-T Switch 3-130 3099 85-C Rev 00 Logout The Logout option (accesse d from the main men u) all o ws a user w orking a t a passwo rd-prote cted consol e terminal or in an acti v e TELNET ses sion to termi nate the se ssi on. The Logout option work s as foll o ws: • If you ar e access ing the BayS tack 41 0-24T sw ...

  • Nortel Networks 10BASE-T - page 273

    309985-C Re v 00 4-1 Chap ter 4 T r oublesho oting This chap ter de scribes ho w to iso late and d iagnose pr oblems with your BayStack 4 10-24T swit ch. This chapt er covers th e fo llowing top ics: • Interp reti ng the LEDs • Diagnosi ng and co rrectin g the probl em -- Normal po wer -up seq uence -- Port connecti on problems • Softwa re do ...

  • Nortel Networks 10BASE-T - page 274

    Using the BayS tack 410 -24T 10BA SE-T Switch 4-2 3099 85-C Rev 00 Interp reting th e LEDs Figure 4- 1 sho w s the LED disp lay pane l us ed wit h t he BaySt ac k 410-24T s wit ch. Ta b l e 4 - 1 describes t he LEDs. Figure 4 -1. Ba yStack 410-24T Switch LED Display P anel T able 4-1. BayStac k 41 0-24T Swit ch LED Descript ions Label T ype Color S ...

  • Nortel Networks 10BASE-T - page 275

    Troubles hooting 309985-C Re v 00 4- 3 Green O n The s witch is conn ected to the ups tream unit ’ s Cascad e A In conne ctor . Y ello w On The Cascade A Out connec tor (CAS Up) f or this s witch is looped i nternally (wr apped to the sec ondary ring). Y ello w or Green Blinking Incomp atib le software re visi on or unab le to obtain a unit ID (R ...

  • Nortel Networks 10BASE-T - page 276

    Using the BayS tack 410 -24T 10BA SE-T Switch 4-4 3099 85-C Rev 00 Dia gnos ing a nd Corre ctin g the P r ob lem Befo re you perf o rm th e pr oble m-so lving step s in th i s sec tion, cycle th e power to the BaySt ack 410-2 4T swit ch (disc onnect and then re connect t he A C po wer c ord); then, v erify that the switc h foll ows the no rmal po w ...

  • Nortel Networks 10BASE-T - page 277

    Troubles hooting 309985-C Re v 00 4- 5 Normal P ower -Up Sequence In a norma l po wer -up sequence, th e LEDs appe ar as fol lo ws: 1. After po wer is appli ed to the switch, th e Pwr (Po wer) LED turns on within 5 seconds. 2. The switc h initia tes a self-te st, durin g which the port LEDs dis play v arious patter ns to indi cate the progre ss of ...

  • Nortel Networks 10BASE-T - page 278

    Using the BayS tack 410 -24T 10BA SE-T Switch 4-6 3099 85-C Rev 00 P or t Connection Problems Y ou can usual ly trace port c onnection problems t o eith er a poor c able conne ction or an impr oper conne ction of t he port c ables at eithe r end of th e link. T o r emedy these t ypes of pr oblems, mak e sure that the cable conn ections a re secure ...

  • Nortel Networks 10BASE-T - page 279

    Troubles hooting 309985-C Re v 00 4- 7 A utonegotiat ion Modes Port conn ection pr oblems can o ccur whe n a port is co nnected t o a sta tion that is not oper atin g i n a c o mpat ib le mode (for e xample, c onne cti ng a full-du ple x por t to a half- duple x port). The Ba yStack 4 10-24T swit ch neg otiates port s peeds accordi ng to the I EEE ...

  • Nortel Networks 10BASE-T - page 280

    Using the BayS tack 410 -24T 10BA SE-T Switch 4-8 3099 85-C Rev 00 Software Download Error Codes Ta b l e 4 - 3 describes e rror code s that ar e associ ated with the softw are do wnload process . The err or codes a ppear onl y on the cons ole scre en of t he switch t hat is connecte d to you r TFTP load ho st during the so ftware do wnload p roces ...

  • Nortel Networks 10BASE-T - page 281

    Troubles hooting 309985-C Re v 00 4- 9 2009 Received image f ailed CRC c heck. V erify that the swi tch software image is v alid (not corrupted) and repeat the softw are d own load proc ess. 2010 No MAC address f ound in EEPR OM. Contact the Nor tel Networks T echnical Solu tions Center . T able 4-3. Software Download Er r or Codes (continued ) Err ...

  • Nortel Networks 10BASE-T - page 282

    ...

  • Nortel Networks 10BASE-T - page 283

    309985-C Re v 00 A-1 Append ix A T echni cal Speci fications This appe ndix list s the te chnica l specif ications f or the BayStack 410- 24T switch. En vir onmental Electrical P aramete r Operating Specification Storage Specification T e mper ature + 5 ° to 4 0 ° C (41 ° to 104 ° F) -2 5 ° to 70 ° C (-13 ° to 158 ° F) Humidity 8 5% maxim u ...

  • Nortel Networks 10BASE-T - page 284

    Using the BayS tack 410 -24T 10BA SE-T Switch A-2 3099 85-C Rev 00 Physical Dimen sions P er formanc e S peci ficat ions Network Protocol and S tandards Compat ibility P aramete r Specifi cations Heigh t 7.03 cm (2.77 i n.) Width 44.20 cm (17. 40 in.) Depth 34.29 cm (1 3.50 in.) W eigh t 3.46 kg (7.63 lb) P aramete r Specifi cations F rame Forward ...

  • Nortel Networks 10BASE-T - page 285

    Technic al Spec ific ations 309985-C Re v 00 A-3 Data R ate Interf ace Option s Safe ty Agency Ce r tification Electromagnetic Emissions • 10 Mb/s Manc hester en coded (or 1 00 Mb/s 4B/5B enc oded f or 100BASE-T MD A) • 10BASE-T -- RJ-4 5 (8-pin modu lar) conne ctors f or MDI-X interf ace (fix ed ports 1-24) • 10BASE-T/100 BASE-TX -- RJ-45 (8 ...

  • Nortel Networks 10BASE-T - page 286

    Using the BayS tack 410 -24T 10BA SE-T Switch A-4 3099 85-C Rev 00 Electromagnetic Immunity Dec laration of Co nf ormity The Declar ation of Conformi ty for the BaySta ck 410-24 T swit ches co mplies wi th ISO/IEC Gui de 22 and EN4501 4. The dec laration i dentif ies the product models, the Nort el Netwo rks name and a ddress, an d the s pecif icat ...

  • Nortel Networks 10BASE-T - page 287

    309985-C Re v 00 B-1 Append ix B Media Dependen t Adapter s This appe ndix descr ibes the option al media de pendent ada pters (MD As) that ar e support ed by your swi tch. The MD As can su pport high -speed con necti ons to serv ers, shared F ast Eth ernet hubs , or backbo ne de vices. Y our BayStack 410-24T swit ch support s the fol lo wing MD As ...

  • Nortel Networks 10BASE-T - page 288

    Using the BayS tack 410 -24T 10BA SE-T Switch B-2 3099 85-C Rev 00 10B ASE-T /1 00B ASE-T X MD A The 400-4TX MD A ( Figure B-1 ) uses four 10B ASE-T/100B ASE-TX RJ-45 (8-pi n mod ula r ) po rt con necto rs to attac h Et hern et device s. Ta b l e B - 1 desc ribes the 400- 4TX MD A components and LEDs. Figure B-1. 400-4TX MD A Front P anel T able B- ...

  • Nortel Networks 10BASE-T - page 289

    Media Dep endent Adapters 309985-C Re v 00 B-3 The RJ-45 p orts are conf igure d as media- dependent interf ace-cr ossov er (MDI-X) connecto rs. Thes e ports c onnect ov er str aight cab les to the netw ork i nterf ace control ler (NIC) card in a node or ser ver , similar to a co n ventio nal Ether net repeat er hub . If you a re connect ing to an ...

  • Nortel Networks 10BASE-T - page 290

    Using the BayS tack 410 -24T 10BA SE-T Switch B-4 3099 85-C Rev 00 There ar e two 100 B ASE-FX model s ( Figure B-2 ): • 400-2FX MD A The 400-2FX MD A uses two long wa v e 1300 nm SC conne ctors to attach de vice s ov er 62.5/125 micron multimod e fi ber op tic cabl e. • 400-4FX MD A The 400-4FX MD A uses fo ur l ong w a v e 1300 nm MT -RJ conn ...

  • Nortel Networks 10BASE-T - page 291

    Media Dep endent Adapters 309985-C Re v 00 B-5 Both models c onform to the IEEE 802 .3u 100B ASE-FX standa rd and ca n be used to att ach f iber -based 100 Mb/s connectio ns to other compatibl e F ast Ethe rnet de vice s. Single- mode f iber cable is not suppor ted. Ta b l e B - 2 describes the 1 00B ASE-FX components and LEDs. For inst alla ti on ...

  • Nortel Networks 10BASE-T - page 292

    Using the BayS tack 410 -24T 10BA SE-T Switch B-6 3099 85-C Rev 00 Installing an MD A The Uplink Module slot on the BayStack 450 switches a ccommodate s a singl e MD A. The connectio n can be ei ther a 10/100 B ASE-TX MD A with an RJ -45 connecto r or a (f iber) 100B ASE-FX MD A with an SC or MT - RJ connect or . T o insta ll an MD A into t he Upli ...

  • Nortel Networks 10BASE-T - page 293

    Media Dep endent Adapters 309985-C Re v 00 B-7 6. Atta ch device s to the MD A ports (see “ Attaching De vi ces t o the Bay Stack 410-24T Swit ch ” on page 2- 7 ). After co nnecting t he port c ables, con tinue to follo w the instru ctions t o connec t power and veri fy the in sta ll atio n . Replacin g an MD A When repla cing an in stall ed MD ...

  • Nortel Networks 10BASE-T - page 294

    ...

  • Nortel Networks 10BASE-T - page 295

    309985-C Re v 00 C-1 Append ix C Quic k Steps to Feature s If you ar e a syste m adminis trator with e xperienc e conf igurin g BayStac k 410-24T switch VLANs, A TM MD As, MultiLi nk T runking, Port Mir roring, an d IGMP Snooping, u se the fl o w charts on the fol lo wing pages as quick c onf igura tion guides. Th e flo wcharts refer you t o the ? ...

  • Nortel Networks 10BASE-T - page 296

    Using the BayS tack 410 -24T 10BA SE-T Switch C-2 30998 5-C R e v 00 Configur in g 802.1Q VLA Ns T o creat e or modify an 802.1Q VLAN, fol lo w the flo wcharts in Figures C-1 to C-3 . Choose VLAN Co nfi guratio n (or pres s v) from the VLAN Con f igurat ion Menu screen t o open the VLAN Conf igurat ion scre en. Figure C-1. Configuring 802.1Q VLANs ...

  • Nortel Networks 10BASE-T - page 297

    Quic k Ste ps to F eatur es 309985-C Re v 00 C-3 Figure C-2. Configuring 802.1Q VLANs (2 of 3) Yes Yes No No Press [Ctrl]-R to return to previous menu. Set the Port field, as appropriate for your configuration. Set PVID. Choose VLAN Port Configuration (or press c) to open the VLAN Port Configuration screen. VLAN Port members Configured? Is PVID cor ...

  • Nortel Networks 10BASE-T - page 298

    Using the BayS tack 410 -24T 10BA SE-T Switch C-4 30998 5-C R e v 00 Figure C-3. Configuring 802.1Q VLANs (3 of 3) Yes No No Set tagged, untagged, unregistered filters, if necessary. Set Port Priority. See also the Traffic Class Configuration screen, if necessary. BS41051B Is filtering correct? Is Port Priority correct? Yes Are all VLANs configured ...

  • Nortel Networks 10BASE-T - page 299

    Quic k Ste ps to F eatur es 309985-C Re v 00 C-5 Config uring th e BayStac k 450- 2M3/2S3 MD As T o conf igure or modify t he BayStack 450 -2M3/2S3 MD A, follo w the flo wcharts in Figur es C-4 to C-6 . Choose A TM MD A Con fi guration (or press a) from the A TM Con fi guration Me nu to open t he A TM MD A Configur ation screen . Figure C -4. Confi ...

  • Nortel Networks 10BASE-T - page 300

    Using the BayS tack 410 -24T 10BA SE-T Switch C-6 30998 5-C R e v 00 Figure C -5. Configurin g the BayStack 450-2M3/2S 3 MD A (2 of 3) Yes No BS45094A Is filtering correct? Off-page reference On-page reference Key Assign the VPort to a Port-Based VLAN. 2 Create a Port-Based VLAN. 1 Press [Ctrl]-R to return to previous menu. Choose VLAN Port Configu ...

  • Nortel Networks 10BASE-T - page 301

    Quic k Ste ps to F eatur es 309985-C Re v 00 C-7 Figure C -6. Configurin g the BayStack 450-2M3/2S 3 MD A (3 of 3) For deta il ed i nf orma tion a bout the t h e Bay Stack 450- 2M3/2 S3 MDA conf iguration sc reens, see “ A TM Confi gur at io n Menu ” on p age 3-83 . For conceptua l informat ion about the BayStac k 450-2M3/2S3 MD A and conf igur ...

  • Nortel Networks 10BASE-T - page 302

    Using the BayS tack 410 -24T 10BA SE-T Switch C-8 30998 5-C R e v 00 Configuring MultiLink T runks T o creat e or modi fy a Mul tiLink tr unk, foll o w the fl o wchart i n Figure C-7 . Choose Mult iLink T runk Conf igur ation (or press t) from the Multi Link T runk Conf igurat ion Menu s creen to op en the Mult iLink T runk Conf igurati on scr een. ...

  • Nortel Networks 10BASE-T - page 303

    Quic k Ste ps to F eatur es 309985-C Re v 00 C-9 Configur ing P or t Mir roring T o creat e or modi fy port- mirrorin g ports, f ollo w the flo wcharts in Figures C-8 and C-9 . Choose Port Mirrori ng Conf igurati on (or pr ess i) f rom the Switch Con fi guration Menu scree n to open t he Port Mirroring Conf igurati on screen. Figure C-8. Configurin ...

  • Nortel Networks 10BASE-T - page 304

    Using the BayS tack 410 -24T 10BA SE-T Switch C-10 30998 5-C R e v 00 Figure C-9. Configuring P or t Mirr oring (2 of 2) Yes No No Enable Port Mirroring (see "Port Mirroring Configuration Rules"). BS41054A Are Address A and B configured? Is Port Mirroring Enabled? Yes 1 Done 2 Configure Addresses. Off-page reference On-page reference Key ...

  • Nortel Networks 10BASE-T - page 305

    Quic k Ste ps to F eatur es 309985-C Re v 00 C-11 Configurin g IGMP Snoo ping T o creat e or modify IGMP Snooping po rts, foll o w the f lo wcharts i n Figures C-10 to C- 12 ). Choose IGMP Conf iguration ( or press g) from the Switch Confi guratio n Menu screen t o open the IGMP Conf igura tion screen . Figure C-10. Configu ring IGMP Snooping (1 of ...

  • Nortel Networks 10BASE-T - page 306

    Using the BayS tack 410 -24T 10BA SE-T Switch C-12 30998 5-C R e v 00 Figure C-11. Configu ring IGMP Snooping (2 of 3) Yes No No BS41056A Is the Robust Value field set correctly? Is the Query Timer field set correctly? Yes Is the Set Router Ports field set correctly? Yes Yes No Is the Proxy field set correctly? No 3 2 Set the correct value for the ...

  • Nortel Networks 10BASE-T - page 307

    Quic k Ste ps to F eatur es 309985-C Re v 00 C-13 Figure C-12. Configu ring IGMP Snooping (3 of 3) Yes No No All trunk members for that trunk are automatically configured as IGMP Static Router Ports. Off-page reference On-page reference BS41057A Key Are all IGMP members configured? Is the port a trunk member? Yes 3 Done Configure all IGMP members ( ...

  • Nortel Networks 10BASE-T - page 308

    ...

  • Nortel Networks 10BASE-T - page 309

    309985-C Re v 00 D-1 Append ix D Connector s and Pi n Assignments This appe ndix descr ibes the BayStack 410- 24T swit ch port c onnectors and pin assignmen ts. RJ-45 ( 10B A SE- T/100B ASE-TX ) P o r t Con nectors The RJ-45 por t c onne ctors ( Fi gure D-1 ) a re wi re d as MDI-X por ts to c onne ct end stati ons without using cro sso ver cables. ...

  • Nortel Networks 10BASE-T - page 310

    Using the BayS tack 410 -24T 10BA SE-T Switch D-2 30998 5-C R e v 00 Ta b l e D - 1 list s the RJ-4 5 (8-pin modu lar) port conne ctor pin a ssignme nts. MDI and MDI-X Devices Media depe ndent int erfac e (MDI) i s the IEEE s tandard f or the in terfa ce to unsh ielde d twis ted p air ( UTP) c able . For two device s to co mm unica te, the tr ans m ...

  • Nortel Networks 10BASE-T - page 311

    Connector s and Pin Assig nme nts 309985-C Re v 00 D-3 MDI-X to MDI Cable Connections BaySta ck 410-24T switches u se MDI-X po rts tha t allo w you to connec t direct ly to end stat ions with out using c rosso ver cable s ( Figure D-2 ). Figure D-2. MDI-X to MDI Cable Connections 18 18 81 81 RX+ RX- TX+ TX- TX+ TX- RX+ RX- MDI-X port BayStack 410-2 ...

  • Nortel Networks 10BASE-T - page 312

    Using the BayS tack 410 -24T 10BA SE-T Switch D-4 30998 5-C R e v 00 MDI-X to MDI-X Cable Connections If you ar e connect ing th e BayStack 41 0-24T switc h to a de vice that also imple ments MDI-X por ts, use a crosso ver cable ( Fi gure D-3 ). Figure D-3. MDI-X to MDI-X Ca b le Connections 18 18 81 81 RX+ RX- TX+ TX- RX+ RX- TX+ TX- MDI-X port Ba ...

  • Nortel Networks 10BASE-T - page 313

    Connector s and Pin Assig nme nts 309985-C Re v 00 D-5 DB-9 (RS-232-D) Console/ Comm P or t Connector The DB-9 Conso le/Comm Port conne ctor ( Fi gure D-4 ) is c onf igured as a data communicat ions equip ment (DCE) connector . The DSR and CTS s ignal output s are al ways a sserted; the CD, DTR, R TS, and RI sig nal input s are not used. Thi s conf ...

  • Nortel Networks 10BASE-T - page 314

    ...

  • Nortel Networks 10BASE-T - page 315

    309985-C Re v 00 E-1 Appendix E Default Settings Ta b l e E - 1 lists the f acto ry def ault set tings for t he BaySta ck 410-24T s witch. T able E-1. Factory Default Settin gs for the BayStack 410-24T Sw itch Appear s in this CI screen Field Default s etting IP C onf igurat ion /Set up ( page 3- 8 ) BootP Request Mode BootP Disab led In-Band Sta c ...

  • Nortel Networks 10BASE-T - page 316

    Using the BayS tack 410 -24T 10BA SE-T Switch E-2 3099 85-C Rev 00 Syst em Char acterist ics ( page 3-1 5 ) Reset Coun t 1 Last Re se t T ype P ower Cycle P ower Statu s Primary P ow e r sysCont act Zero-leng th string sysNam e Ze ro-leng th string sysLo cation Zer o-length s tring MA C Address T able ( pa ge 3-21 ) Aging Time 300 secon ds Find an ...

  • Nortel Networks 10BASE-T - page 317

    Default S ettings 309985-C Re v 00 E-3 MA C Address Security T ab le ( page 3-3 6 ) Fi nd an Addre ss 00-00-00-00-00-00 (no MA C address a ssigned) MA C Address - - - - - (no MA C address assign ed) Allo wed So urce - (Bl ank fiel d) VLAN Conf igur ation ( page 3-4 1 ) Create VLAN 1 Delete VLAN bl ank field VLAN Name VLAN # ( VLAN number ) Manage m ...

  • Nortel Networks 10BASE-T - page 318

    Using the BayS tack 410 -24T 10BA SE-T Switch E-4 3099 85-C Rev 00 P or t Configu ration ( page 3 -53 )U n i t 1 Status Enab led (f or all por ts) Lnk T rap On A u tonegotiation Enab led (f or all ports ) Speed/D uple x 100Mbs /Half (whe n A utonegotiation i s Disa ble d) High Spee d Flo w Control Config urat ion ( page 3-55 ) Unit 1 to 8 (de pendi ...

  • Nortel Networks 10BASE-T - page 319

    Default S ettings 309985-C Re v 00 E-5 Rate Li mit ing C onfig urati on ( page 3-69 ) P ack et T yp e Both Limit N one IGMP Con figur ation ( page 3-73 )V L A N 1 Snoo pin g Enabled Proxy Enabled Rob ust V alue 2 Quer y T ime 125 se cond s Set Router P or ts V ersion 1 Stat ic Ro ute r P o r ts - (for all p or ts) Multic ast Group Membershi p ( pag ...

  • Nortel Networks 10BASE-T - page 320

    Using the BayS tack 410 -24T 10BA SE-T Switch E-6 3099 85-C Rev 00 A TM MD A Softw are Downloa d ( page 3-91 ) Imag e Filenam e Zer o-length s tring TFTP Server IP Address 0.0.0.0 (no IP add ress a ssigned) Star t TFTP T ransf er of MD A Image No Cons ole/C o mm P or t Config urat ion ( page 3-94 ) Conso le P or t Speed 9600 Baud Cons ole Switch P ...

  • Nortel Networks 10BASE-T - page 321

    Default S ettings 309985-C Re v 00 E-7 Spanning T ree Switch Settin gs ( page 3-108 ) Bridge Priority 8000 (read only) Designat ed Root 8000 (bridge_id) (read only ) Root P or t Uni t: 0 / P or t: 0 (read only ) Root P ath Cos t 0 (read on ly) Hell o Time 2 seco nds (r ead on ly) Maxim um Age Time 20 seconds (re ad only) F orw ard Dela y 15 s econd ...

  • Nortel Networks 10BASE-T - page 322

    Using the BayS tack 410 -24T 10BA SE-T Switch E-8 3099 85-C Rev 00 Config urat ion File ( page 3-118 ) Configur ation Image Filenam e Zero-length st ring TFTP Server IP Address 0.0.0.0 (no IP add ress a ssigned) Cop y Configur ation Im age to Server No Retr ieve Confi gurat ion I m age from Ser v er No T able E-1. Factory Default Settin gs for the ...

  • Nortel Networks 10BASE-T - page 323

    309985-C Re v 00 F-1 Appendix F Sample BootP Confi guration File This appe ndix pro vides a sample BootP conf iguration f ile. The BootP serv er searche s for thi s f ile, cal led bootpt ab (or BOO TPT AB .TXT , dependi ng on your operati ng sys tem), which c ontains t he site- specif ic informatio n (includ ing IP address es) needed to per form th ...

  • Nortel Networks 10BASE-T - page 324

    Using the BayS tack 410 -24T 10BA SE-T Switch F-2 309985- C Rev 00 # Caution # # Omitting a Forward slash (/) when the entry is continued to the next # line, can cause the interruption of the booting process or the # incorrect image file to download. Always include forward slashes # where needed. # # Important Note: # # If a leading zero (0) is use ...

  • Nortel Networks 10BASE-T - page 325

    309985-C Re v 00 Index-1 A acronyms , xxvi Actual Hello Interval , 3-109 Aging Ti me field , 3-22 Allowed Source IP Addre ss field , 3-113 Allowed Source M ask field , 3-113 asynchron ous tran sfer mode CI menus and screen s , 3- 83 conf iguration flow c h ar ts , C-1 AT M . See as ynchro nous tran sfer mode Authentic ation T rap fie ld , 3-14 Auto ...

  • Nortel Networks 10BASE-T - page 326

    Index-2 309985-C Re v 00 Cons ole P assword f ield , 3-96 Console Port Sp eed field , 3-95 Console R ead -Only Password f ield , 3-97 , 3-98 Console Read-W rite Password f ield , 3-97 , 3- 99 cons ol e/comm po r t conf iguration sc re e n , 3-94 connectin g to te rminal , 2-1 1 illustrati on , D-5 pin assi gnments , D-5 Consol e/Co mm Port Configur ...

  • Nortel Networks 10BASE-T - page 327

    309985-C Rev 00 Index- 3 installatio n chassis in a rack , 2-5 flat surface , 2-4 grou nding , 2-3 LED ve rific at ion , 2-14 requiremen ts , 2-1 tools , 2- 1 verify ing , 2-14 IP address at startup , 2-17 automa tic conf iguration , 1-20 format of , 2-18 , 2- 23 setting , 2-17 IP Co nf iguratio n optio n , 3-5 IP Co nf igura tion sc reen , 3-8 IP ...

  • Nortel Networks 10BASE-T - page 328

    Index-4 309985-C Re v 00 Console/Comm Port Confi guration , 3-5 Display Ev e nt Log , 3-6 Dis p l ay Po rt S tat isti cs , 3-20 Display S panning T ree Switch Se ttings , 3-104 IP Conf iguration , 3-5 Logout , 3-7 MA C Addre ss T able , 3- 19 MultiLin k T runk Conf iguration , 3-19 Port Config urati on , 3-19 Port Mirroring Conf i gurat ion , 3-19 ...

  • Nortel Networks 10BASE-T - page 329

    309985-C Rev 00 Index- 5 RJ-45 p ort connect or illustrati on , D-1 pin assi gnments , D-2 RMON. See remote monitoring Root Pa th Cost f ield , 3- 109 Root Port f ield , 3-1 09 RS-232 con sole po rt , 2-10 S Security , 1-13 MA C addre ss-ba sed ne twork secu rity , 1-15 RADIUS-base d net w or k sec urity , 1-1 6 SNMP , 1-16 Self-T e st screen durin ...

  • Nortel Networks 10BASE-T - page 330

    Index-6 309985-C Re v 00 tex t con ventio ns , xxv TFTP Serv er IP Address field , 3-116 , 3-119 TFTP . See T r i vial File T ra nsfer Proto c ol T otal Octets f ield , 3-80 T rap IP Address fields , 3- 14 traps , 1-21 T ri v ial File T ransfer Protocol (TFTP ) software do wn load , 3-114 using to up grade firmware , 1-11 troublesho oting port inte ...

Manufacturer Nortel Networks Category Switch

Documents that we receive from a manufacturer of a Nortel Networks 10BASE-T can be divided into several groups. They are, among others:
- Nortel Networks technical drawings
- 10BASE-T manuals
- Nortel Networks product data sheets
- information booklets
- or energy labels Nortel Networks 10BASE-T
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nortel Networks 10BASE-T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nortel Networks 10BASE-T, service manual, brief instructions and user manuals Nortel Networks 10BASE-T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nortel Networks 10BASE-T.

Similar manuals

A complete manual for the device Nortel Networks 10BASE-T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nortel Networks 10BASE-T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nortel Networks 10BASE-T.

A complete Nortel Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nortel Networks 10BASE-T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nortel Networks 10BASE-T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nortel Networks 10BASE-T, that we can find in the current document
3. Tips how to use the basic functions of the device Nortel Networks 10BASE-T - which should help us in our first steps of using Nortel Networks 10BASE-T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nortel Networks 10BASE-T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nortel Networks 10BASE-T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nortel Networks 10BASE-T?

Use the form below

If you did not solve your problem by using a manual Nortel Networks 10BASE-T, ask a question using the form below. If a user had a similar problem with Nortel Networks 10BASE-T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)