English dropdown-ico

Manual Radio Shack HTX-242

48 pages 0.11 mb
Download

Go to site of 48

Summary
  • Radio Shack HTX-242 - page 1

    Cat. No . 19-1126 O WNER’S MANU AL HTX-242 T W O-METER MOBILE T RANS- CEIV ER Please read bef ore using this transceiver . ...

  • Radio Shack HTX-242 - page 2

    2 Y our HTX-242 Two-Meter Mobile T ransceiver is an exciting addi- tion to Radio Shack’s growing line of high-quality amateu r radio equipment. It offers some of the most advanced, and most requested, features available in a mobile transceiver . Be sure to read this entire manual to understand how to use all the radio’s features. FEA TURES Auto ...

  • Radio Shack HTX-242 - page 3

    3 Programmable Frequency Step — lets you set the frequency step for tuning or scanning to 5, 10, 12.5, 20, 25 , 50, or 100 kHz. Extended Band Coverage — receives fr om 136 to 174 MHz and lets you extend transmit coverage to include 2-Meter ham, MARS (Military Amateur Radio Service), and CAP ( Civil Air Patrol). Dual VFO (V ariable-Frequency Osc ...

  • Radio Shack HTX-242 - page 4

    4 CONTENTS Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Unpacking the Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connecting the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . 6 Mounting the HTX-242 in a Vehicle . . . . . . . . . . . . . . . . . . . 7 Connecting an Antenn ...

  • Radio Shack HTX-242 - page 5

    5 Advanced Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Frequency Offset Defaults . . . . . . . . . . . . . . . . . . . . . . . . . 25 Turning Auto Duplex On and Off . . . . . . . . . . . . . . . . 25 Changing the Default Offset . . . . . . . . . . . . . . . . . . . . 26 Reversing the Offset . . . . . . . . . . . . . . . . ...

  • Radio Shack HTX-242 - page 6

    6 INSTALLATION Unpac king the T ransceiv er As you unpack the transceiver , check to be sure you have all the items shown in this illustration. Connecting the Micr ophone Plug the microphone’s connector into the microphone jack, secure the microphone holder to either the left or right side of th e trans- ceiver , then clip the microphone to the h ...

  • Radio Shack HTX-242 - page 7

    7 Mounting the HTX-242 in a V ehicle When you select a mounting location for the HTX-242, be sure: • Y ou c an easily reach it • No wires or cables will interfer e with the vehicle’s operation • It is not directly in front of heating vents • All wires will reach their connection points Use the supplied screws, metal washers, bracket, rubb ...

  • Radio Shack HTX-242 - page 8

    8 Connecting an Antenna Y ou can connect a variety of antennas for both mobile and base- station use (see “Using the HTX-242 as a Ba se Station” on Page 10). Each type of antenna has its benefits. Choose one that best meets your needs. When deciding on a mobile or base-station a ntenna and its loca- tion, consider the following: • The antenna ...

  • Radio Shack HTX-242 - page 9

    9 Connecting to y our V ehic le’ s Po w er Follow these steps to power the HTX-242 in your vehicle. 1. Connect the black wire to your vehicle battery’s negative (–) ter minal or to a metal p art of the vehicle’s frame. Be sure the metal part is not insulated from the vehicle’s frame by a plastic part. 2. Connect the red wire to a source o ...

  • Radio Shack HTX-242 - page 10

    10 Using the HTX-242 as a Base Station Although we designed the HTX-242 primari ly for use as a mobile transceiver , you can also use it as a base station. To do so, you need these items: • 13.8-V olt DC regulated power supply that can supply at least 10 amps continuous power • Base station antenna • 50-ohm coaxial antenna cable and connecto ...

  • Radio Shack HTX-242 - page 11

    11 Using the HTX-242 with P ack et Radio Y ou can connect your HTX-242 directly to a packet radio terminal node controller , a s shown below. Note: Y ou can purchase an 8-pin plug that matches your HTX- 242’s MIC jack at your local Radio Shack store (Cat. No. 279-4 40). Connecting an Exter nal Speak er (Optional) Y ou can connect an exter nal spe ...

  • Radio Shack HTX-242 - page 12

    12 UNDER STANDING THE HTX-242 This section explains some of the HTX-242’ s features. See “Basic Operation” on Page 16 for instructions about how to use these fea- tures. Dual VFO Modes The VFO (V ariable-Frequency Oscillator) modes let you directly select a frequency anywhere within the HTX-242’s o perating range. Y our HTX-242 has two VFOs ...

  • Radio Shack HTX-242 - page 13

    13 Subaudible T one (CTCSS) F eatures Subaudible tones, also known as CTCSS (Continuous Tone-Coded Squelch System) are low-frequency tones that are mixed with a transmission. They are used by many repeaters to limit interfer- ence from other nearby radio transmitters. When a repeater uses a subaudible tone, it does not react to any transmission t h ...

  • Radio Shack HTX-242 - page 14

    14 Under standing the Display One or more of the following indicators appear when you tur n on and use your HTX-242. VFO-A or VFO-B — appears when you select one of the VFO modes. See “Dual VFO Modes” on Page 12. VFO-A-T VFO-B — appears when you select the DUP-A mode (tr ansmit on VFO-A and receive on VFO-B). See “Using the Dual V FOs for ...

  • Radio Shack HTX-242 - page 15

    15 + or – — indicates the duplex offset dir ection. See “Overriding the Duplex Offset” on Page 26. DTMF — appears when you turn on DTMF squelch. See “Using DTMF Page” on Page 33. HIGH or LOW — ind icates the transmit power level. See “Setting the Power Level” on Page 17. ON-AIR — appears when you transmit . See “T ransmittin ...

  • Radio Shack HTX-242 - page 16

    16 BASIC OPERATION Tu r n i n g O n / O f f Y o u r H T X - 2 4 2 To tur n your HTX-242 on or of f, press PO WER . When you tur n it on, all display elements briefly turn on and the HTX-242 sounds five tones. Then it returns to the last-used settings. Resetting the HTX-242 When you first use your HTX-242, if it displ ays PLL Err or EEP Err , or if ...

  • Radio Shack HTX-242 - page 17

    17 Setting V olume and Squelch SQUELCH sets the minimum signal level th at must be present for the HTX-242 to amplify the signal through the speaker or to stop when scanning. Follow these steps to set th e squelch. 1. Rotate SQUELCH fully counterclockwise. 2. Set VO L U M E so you can hear the background hiss between transmissions. Note: If you do ...

  • Radio Shack HTX-242 - page 18

    18 Selecting a Frequenc y Y ou can select a frequency in any of three ways: • Direct entry • Tuning • Scanning Directly Entering a Frequenc y 1. Press VFO to select either VFO-A or VFO-B . 2. Enter the last five digits of the frequency. For example, t o enter 145.050, simply press 45050 . T uning to a Frequency 1. Press VFO to select either V ...

  • Radio Shack HTX-242 - page 19

    19 Scanning f or a Frequenc y 1. Press VFO to select either VFO-A or VFO-B . 2. Press F . Then press ▲ to scan up or ▼ to scan down. Setting the Frequenc y Step The factory default frequency step is 20 kH z. Each time y ou rotate TUNE one click, or press UP or DO WN on the microphone, the fre- quency changes by 20 kHz. When scanning, the HTX-24 ...

  • Radio Shack HTX-242 - page 20

    20 Setting the Scan Options Stor ing Scan Skip Frequencies Y ou can store up to five frequencies for your HTX-242 to skip when scanning. This lets you prevent the HTX-242 from stopping on beacon or packet repeater frequencies. 1. Press VFO . 2. Hold F for at least 1 second. F UNC flashes. 3. Press MR . The HTX-242 displays SC and the current scan r ...

  • Radio Shack HTX-242 - page 21

    21 Setting the Scan Resume Delay When you set the scan resume condition to cr (carrier), the HTX- 242 resumes scanning after the carrier drops. The scan resume delay option lets you set the HTX-242 to pause bef ore resuming so you can hear replies. The factory default is 2 seconds. Follow these steps to change the scan resume delay. 1. Press VFO . ...

  • Radio Shack HTX-242 - page 22

    22 Receiving T ransmissions To receive a transmission, tur n on the HTX-242, adjust the volume and squelch, and tune to the frequency you want to mo nitor . The HTX-242 displays BUSY , and the signal-strength indicator sh ows the relative signal strength when it receives a signal. Note: If BUSY appears but you hear nothing from the speake r , be su ...

  • Radio Shack HTX-242 - page 23

    23 Manually T ransmitting DTMF T ones To transmit DTMF tones, follow the steps for transmitting. Then, while holding down P TT , press the digits on the microphone to transmit the tones. T ransmitting DTMF T ones fr om Memor y 1. Press DTMF so the HTX-242 displays DTMF and the current DTMF memory number . 2. To select a dif ferent DTMF memory, pres ...

  • Radio Shack HTX-242 - page 24

    24 Limiting T ransmit Duration When you communicate on the 2-meter ban d, you should keep your transmissions as brief as possible. Mos t repeaters have built- in timers that limit single transmissions to 3 minutes or less. Y ou can set the transceiver to stop transmitting and sound a bee p if a single transmission exceeds the selected time (n one, ...

  • Radio Shack HTX-242 - page 25

    25 ADV ANCED OPERATION Frequenc y Offset Def aults When you select a frequency, the HTX-242 defaults to th e following frequency of fsets if auto duplex is turned on: The default offset is 600 kHz. For example, if you tune to receive 146.940 MHz, the HTX-242 automatically tr ansmits at 146.340 MHz (600 kHz less than 146.940). T ur ning Auto Duple x ...

  • Radio Shack HTX-242 - page 26

    26 Chang ing the Def ault Of fset Follow these steps to change the default offset for the VFO modes. 1. Press VFO . 2. Hold F for at least 1 second. F UNC flashes. 3. Press SHIFT . The HTX-242 displays oS and the current of fset (in MHz). 4. Rotate TUNE , press UP or DO WN on th e microphone, or directly enter the step using the microphone’s keyp ...

  • Radio Shack HTX-242 - page 27

    27 Using the Dual VFOs f or Duple x Operation Follow these steps to use one VFO to transm it and the other to receive. 1. Press VFO to select VFO-A . 2. Select a frequency. 3. Press VFO to select VFO-B . 4. Select a frequency. 5. Press DUP . When the HTX-242 displays: VFO-A-T VFO-B it transmits on the VFO-A frequency and receives on the VFO-B frequ ...

  • Radio Shack HTX-242 - page 28

    28 USING MEMOR Y CHANNELS The HTX-242 has 40 standard memory channels and on e calling- frequency memory, where you can store frequently-used frequen- cies, along with all settings, for quick access . Stor ing a Frequenc y 1. Press VFO and tune to a frequency you want to store. Set all duplex and subaudible ton e sett ings (see “Using Subaud ible ...

  • Radio Shack HTX-242 - page 29

    29 7. Press ▲ . The HTX-242 displays rC and the current receive subaudible tone. 8. Rotate TUNE , or press UP or DO WN on the microphone, to change the receive subaudible tone. 9. Press ▲ . The HTX-242 displays tC and the current transmit subaudible tone. 10. Rotate TUNE , or press UP or DO WN on the microphone, to change the transmit subaudibl ...

  • Radio Shack HTX-242 - page 30

    30 T uning to a Standard Memor y Channel 1. Press MR . 2. Rotate M-CH , or press UP or DO WN on the microphone, to select the desired memory channel. Using the Calling-Frequenc y Memor y Press CALL . The HTX-2 42 recalls all settings saved in the calling- frequency memory. Checking Prior ity Channel 1 To have the HTX-242 periodically “look back? ...

  • Radio Shack HTX-242 - page 31

    31 Scanning Memor y Channels To set the HTX-242 to scan memory channels, press and release MR . Then press and hold MR for at least 1 second. . flash es, and the HTX-242 scans memories that have the scan option turned on (see “Enabling/Disabling Scanning for Mem ory Channels” on this page). The HTX-242 stops when it encounte rs a transmission. ...

  • Radio Shack HTX-242 - page 32

    32 USING DTMF AND SUBAUDIBLE T ONES Y our HTX-242 has 10 DTMF (Dual-Tone, Multiple Frequency — another name for touch tones ) memories where you can store DTMF sequences. DTMF Memory 0 can hold a 7-digit DTMF paging sequence your HTX-242 must receive for DTMF paging. DTMF Memories 1-10 each hold 15 digits you can quickly transmit. Stor ing a DTMF ...

  • Radio Shack HTX-242 - page 33

    33 Using DTMF P age DTMF page lets other operators page you. To turn on DTMF page, press DTMF so DTMF appe ars. The HTX-242 does not pass trans- missions to the speaker until it receives the sequence you stored in DTMF Memory 0. If DTMF Memory 0 is emp ty, DTMF page does not operate. When you receive a DTMF pag e, the HTX-242 turns on the speaker a ...

  • Radio Shack HTX-242 - page 34

    34 • Assuming all club members have DTMF pag e activated, to page everyone, transmit 465ABC. • To page W est Side members, transmit 4654ABC. • To page Doug and Cary, transmit 46518ABC. • To page only one person, transmit the 7-digit sequence. Using A uto-Reply If you turn on the auto-reply feature, the HTX-242 automatically sends the sequen ...

  • Radio Shack HTX-242 - page 35

    35 Using DTMF Auto Send If you turn on the DTMF auto-send feature, the HTX-242 automat- ically sends the sequence stored in the currently-selected DTMF memory every time you press P TT . Follow these steps to turn on auto send. 1. Press VFO . 2. Hold F for at least 1 second. F UNC flashes. 3. Press MR . 4. Repeatedly press ▲ to select the dA opti ...

  • Radio Shack HTX-242 - page 36

    36 Using Subaudible T ones Some repeaters require you to transmit a subaudible tone to acti- vate them. Y ou can set your HTX-242 to transmit any of the 38 standard subaudible tones. Y ou can also limit incoming reception by setting the HTX-242 to open the squelch only when someone transmits a subaudible tone you select. V alid Subaudible T ones Se ...

  • Radio Shack HTX-242 - page 37

    37 5. Press ▲ . The HTX-242 displays tC and the currently set transmit tone. 6. Rotate TUNE , or press UP or DO WN on the microphone, to set a differ ent transmit tone. If yo u do not want a transmit tone, select oFF . 7. Press T- S Q L or P TT to save the settings. Activ ating Subaudible T one T ransmit an d Squelch 1. Press T- S Q L once. T app ...

  • Radio Shack HTX-242 - page 38

    38 USING THE MENU Y our HTX-242 has a menu that lets you select how some functions work. The previous sections included procedures that access this menu — this section provides an overview. Follow these steps to use the menu: 1. Press VFO . 2. Hold F for at least 1 second. F UNC flashes. 3. Press MR . The first menu item appears. Then press ▲ o ...

  • Radio Shack HTX-242 - page 39

    39 Menu Item Default Option Explanation/Avai lable Settings Page # SC ti Scan resume option. ti — time out in 10 seconds. Cr — resume after carrier drops. SE — do not resume scanning. 20 Sd 2.0 Scan delay (delay before resume when SC is set to Cr ). 0.5 , 1 , 2 , or 4 . 21 S 1 –––.––– Scan skip frequency 1 (frequency for HTX-242 t ...

  • Radio Shack HTX-242 - page 40

    40 T R OUBLESHOOTING Error Codes Y our HTX-242 has the following three built-in error codes. tF Err — appears if you try to transmit outside the allowed range (see “Extending the Transmit Frequency Range” on Page 16). PLL Err — appears if the HTX-242’s PLL (phase-locked loo p) sec- tion malfunctions. If turning the HTX-242 of f then back ...

  • Radio Shack HTX-242 - page 41

    41 Replacing the Fuse Y our HTX-242 (and vehicle) are protected by a 15-amp fuse in the HTX-242’s positive (red) power wire. If the HTX-242 does not turn on, even when you are sure the power wire is properly connected to a 12V DC power source, check the fuse and replace it, if necessary. 1. Snap open the in-line fuse holder . 2. Remove the fuse f ...

  • Radio Shack HTX-242 - page 42

    42 SPECIF ICATIONS General Frequency Range (Factory) T ransmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 – 148 MHz Receive. . . . . . . . . . . . . . . . . . . . . . . . 136.000 – 17 4.000 MHz Frequency Step . . . . . . . . . . . . . . 5/10/12.5/20/25/50/100 kHz Frequency Stability . . . . . . . . . . . . . . . . . . . . . . ...

  • Radio Shack HTX-242 - page 43

    43 T ransmitter RF Power Output . . . . . . . . . . . . . . . . . . . 45 W (high)/10 W (Low) Maximum Deviation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 kHz Hum and Noise . . . . . . . . . . . . . . . . . . . . . . . . Better than 35 dB Audio Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3% (TX) Au ...

  • Radio Shack HTX-242 - page 44

    44 SCHEMATICS ...

  • Radio Shack HTX-242 - page 45

    45 RF SCHEMATIC ...

  • Radio Shack HTX-242 - page 46

    46 DIG ITAL SCHEMATIC ...

  • Radio Shack HTX-242 - page 47

    47 MICR OPHONE SCHEMATIC ...

  • Radio Shack HTX-242 - page 48

    Radio Shack A Division of T andy Corporation Fort W orth, T exas 76102 7A6 Printed in K ore a Radio Shack Limited W arranty This product is warranted against def ects for 1 y ear from date of purchase from Radio Shack company-o wned stores and authorized Radio Shack franchisees and dealers. Within this period, we will repair it without charge for p ...

Manufacturer Radio Shack Category Radio

Documents that we receive from a manufacturer of a Radio Shack HTX-242 can be divided into several groups. They are, among others:
- Radio Shack technical drawings
- HTX-242 manuals
- Radio Shack product data sheets
- information booklets
- or energy labels Radio Shack HTX-242
All of them are important, but the most important information from the point of view of use of the device are in the user manual Radio Shack HTX-242.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Radio Shack HTX-242, service manual, brief instructions and user manuals Radio Shack HTX-242. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Radio Shack HTX-242.

Similar manuals

A complete manual for the device Radio Shack HTX-242, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Radio Shack HTX-242 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Radio Shack HTX-242.

A complete Radio Shack manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Radio Shack HTX-242 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Radio Shack HTX-242, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Radio Shack HTX-242, that we can find in the current document
3. Tips how to use the basic functions of the device Radio Shack HTX-242 - which should help us in our first steps of using Radio Shack HTX-242
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Radio Shack HTX-242
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Radio Shack HTX-242 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Radio Shack HTX-242?

Use the form below

If you did not solve your problem by using a manual Radio Shack HTX-242, ask a question using the form below. If a user had a similar problem with Radio Shack HTX-242 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)