English dropdown-ico

Manual Husqvarna 326Lx

40 pages 1.66 mb
Download

Go to site of 40

Summary
  • Husqvarna 326Lx - page 1

    E E E E n n n n g g g g l l l l i i i i s s s s h h h h 326C 326L 326L X-SERIES 326LD X-SERIES Oper ator’ s manual (Carb II, EP A II) Please read the operator’ s man ual carefully and mak e sure you understand the instructions before using the machine. ...

  • Husqvarna 326Lx - page 2

    2 – English KEY T O SYMBOLS Symbols W ARNING! Clear ing saws , brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injur y to the operator or others. Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine . Alwa ys wear : • A protect ...

  • Husqvarna 326Lx - page 3

    English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Long-term exposure to noise can result in permanent hear ing impairment. So alwa ys use approved hearing protection. Maintenance, replacement, or repair of the emission control de vices and system ma y be performed by an y nonroad engine repair establishment or individual. This ...

  • Husqvarna 326Lx - page 4

    4 – English INTR ODUCTION Dear customer! Congratulations on y our choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River , for production of m uskets . The location was logical, since w ater power w as har ...

  • Husqvarna 326Lx - page 5

    English – 5 WHA T IS WHA T? What is what? 1 T r immer head 2 Grease fi ller cap , be vel gear 3 Be vel gear 4 Cutting attachment guard 5 Shaft 6 Loop handle 7 Throttle control 8 Stop s witch 9 Throttle lock 10 Cylinder cov er 11 Star ter handle 12 Fuel tank 13 Choke control 14 Air purge 15 Air fi lter cov er 16 Handle adjustment 17 Shaft coupli ...

  • Husqvarna 326Lx - page 6

    6 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HEARING PRO TECTION W ear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed ey e protection. If you use a visor then you m ust also wear approv ed protective goggles. Approved protective goggles m ust comply with stan ...

  • Husqvarna 326Lx - page 7

    English – 7 GENERAL SAFETY PRECA UTIONS Throttle loc k The throttle lock is designed to pre vent accidental operation of the throttle control. When you press the loc k (A) (i.e. when you g rasp the handle) it releases the throttle control (B). When you release the handle the throttle control and the throttle lock both mo v e back to their origina ...

  • Husqvarna 326Lx - page 8

    8 – English GENERAL SAFETY PRECA UTIONS Vibration damping system Y our machine is equipped with a vibration damping system that is designed to reduce vibration and mak e operation easier . Use of incorrectly wound cord or an incorrect cutting attachment increases the le vel of vibr ation. See instructions under the heading Cutting equipment. The ...

  • Husqvarna 326Lx - page 9

    English – 9 GENERAL SAFETY PRECA UTIONS Locking n ut A locking n ut is used to secure some types of cutting attachment. When fi tting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. T o remov e it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left ...

  • Husqvarna 326Lx - page 10

    10 – English ASSEMBL Y Fitting the loop handle (326C) • P osition the handle on the shaft. Note that the handle must be mounted below the arro w on the shaft. • Fit the screw , secur ing plate and wing nut as shown in the diagram. • Tighten the wing nut. Fitting the loop handle (326L, 326Lx, 326LDx) • Clip the loop handle onto the shaft. ...

  • Husqvarna 326Lx - page 11

    English – 11 ASSEMBL Y Fitting the trimmer head Fitting a trimmer guar d and Superauto II 1" trimmer head (326L, 326Lx, 326LDx) • Fit the correct trimmer guard (A) for use with the trimmer head. Hook the guard onto the fi tting on the shaft and secure it with the bolt (L). • Fit the drive disc (B) on the output shaft. • T ur n the bla ...

  • Husqvarna 326Lx - page 12

    12 – English ASSEMBL Y Fitting the trimmer guar d and trimmer head (326C) Guard • Fit the guard as shown in the diagr am. Tighten securely . T rimmer head • Fit the dust cup on the shaft. The nut must be completely cov ered by the dust cup . • Hold the dust cup with a spanner to pre vent the shaft from rotating. • Screw the trimmer head o ...

  • Husqvarna 326Lx - page 13

    English – 13 FUEL HANDLING Fuel safety Ne ver start the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allow remaining fuel to e vapor ate. 2 If you ha ve spilt fuel on yourself or y our clothes, change your clothes . W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine is lea ...

  • Husqvarna 326Lx - page 14

    14 – English FUEL HANDLING Mixing • Alwa ys mix the gasoline and oil in a clean container intended f or fuel. • Alwa ys star t by fi lling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline. • Mix (shake) the fuel mixture thoroughly bef ore fi l ...

  • Husqvarna 326Lx - page 15

    English – 15 ST AR TING AND ST OPPING Chec k bef ore star ting • Ne ver start the machine indoors. Exhaust fumes can be dangerous if inhaled. • Obser ve y our surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. • Place the machine on the ground, ensure the cutting attachment ...

  • Husqvarna 326Lx - page 16

    16 – English ST AR TING AND ST OPPING CA UTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged. Alwa ys use glov es. Do not use a machine with damaged spark plug cap. Stopping The engine is s witched off by mo ving the stop s witch to the stop po ...

  • Husqvarna 326Lx - page 17

    English – 17 W ORKING TECHNIQUES General w orking instructions Basic safety rules 1 Look around you: • T o ensure that people, animals or other things cannot aff ect your control of the machine . • T o ensure that people, animals, etc., do not come into contact with the cutting attachment or loose objects that are thrown out b y the cutting a ...

  • Husqvarna 326Lx - page 18

    18 – English W ORKING TECHNIQUES Clearing • The clearing technique removes all unw anted vegetation. K eep the tr immer head just abov e the ground and tilt it. Let the end of the cord strike the ground around trees , posts, statues and the like . CA UTION! This technique increases the wear on the cord. • The cord wears quic ker and m ust be ...

  • Husqvarna 326Lx - page 19

    English – 19 MAINTENANCE Carb uretor Y our Husqvarna product has been designed and manuf actured to speci fi cations that reduce har mful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak perf ormance and to minimise har mful exhaust emissions after the running-in per i ...

  • Husqvarna 326Lx - page 20

    20 – English MAINTENANCE Fine adjustment of the idle speed T Adjust the idle speed using the idle adjustment screw T , if it is necessar y to readjust. First tur n the idle adjustment screw T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops. The idle speed is correctly a ...

  • Husqvarna 326Lx - page 21

    English – 21 MAINTENANCE Cooling system T o keep the working temperature as low as possib le the machine is equipped with a cooling system. The cooling system consists of: 1 Air intake on the starter . 2 Fins on the fl ywheel. 3 Cooling fi ns on the cylinder . 4 Cylinder cov er (directs cold air over the cylinder). Clean the cooling system with ...

  • Husqvarna 326Lx - page 22

    22 – English MAINTENANCE Oiling the air fi lter Alwa ys use HUSQV ARNA fi lter oil, ar t. no. 531 00 92-48. The fi lter oil contains a solvent to mak e it spread ev enly through the fi lter . Y ou should theref ore av oid skin contact. Put the fi lter in a plastic bag and pour the fi lter oil ov er it. Knead the plastic bag to distribute th ...

  • Husqvarna 326Lx - page 23

    English – 23 MAINTENANCE Maintenance schedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are described in the Maintenance section. Maintenance Daily maintenance W eekly maintenance Monthly maintenance Clean the outside of the machine. X Make sure the throttle trigger lock and the throttl ...

  • Husqvarna 326Lx - page 24

    24 – English TECHNICAL D A T A T echnical data Note 1: Equivalent noise pressure le v el is calculated as the time-weighted energy total f or noise pressure lev els under various working conditions with the follo wing time distr ibution: 1/2 idle and 1/2 max. speed. NO TE! Noise pressure at the user’s ear and vibr ation on the handles are measu ...

  • Husqvarna 326Lx - page 25

    English – 25 TECHNICAL D A T A Appro ved accessories T ype Cutting attachment guar d, Art. no. 326C Blade shaft thread 3/8 R Plastic blades T r icut Ø 230 mm (R) 537 02 61-01 / 537 07 67-01 T r immer head T r immy Hit J unior (R) 537 02 61-01 / 537 07 67-01 T r immy Fix (R) 537 02 61-01 / 537 07 67-01 T r immy Hit VII (R) 537 02 61-01 / 537 07 6 ...

  • Husqvarna 326Lx - page 26

    26 – English FEDERAL EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EP A (The US Environmental Protection Agency), CARB (Calif ornia Air Resources Board) and Husqvarna Forest & Garden are pleased to e xplain the emissions control system warranty on y our 2001 and later small nonroad engine. In U.S . and Ca ...

  • Husqvarna 326Lx - page 27

    1 T rimmy Hit Junior 2 5 6 7 8 9 10 12 “Click” 3 4 5,75 m 19' 2,0-2,4 mm .080-.095" 15 cm 6" ~ 2,8 m 9' 1.) 2.) 11 15 cm 6" 15 cm 6" ...

  • Husqvarna 326Lx - page 28

    6" 2) 1) ~ 15 cm 6" 7 8 9 10 11 15 cm 12 3 4 56 7,0 m 23" 2,0- mm , 080-." 12 cm 5" ~ 3,5 m 1 1" T rimmy VII ...

  • Husqvarna 326Lx - page 29

    "Clic" 1 2 3 5 6 7 9 6,0 m 18' 4 8 3,05 m 9' 2,0-2,4 mm .079-.095" 10 cm 4" 6" 15 cm T25 ...

  • Husqvarna 326Lx - page 30

    2 4 3 2,0-2,4 mm .079-0.095" 2,75 m 9' 2,75 m 9' 6" 15 cm 5 6 1 T25C ...

  • Husqvarna 326Lx - page 31

    "Clic" 1 2 3 5 6 7 9 2,75 m x 2 9' x 2 4 8 2,0-2,4 mm .079-0.095" 2,75 m 9' 2,75 m 9' 6" 15 cm T25C ...

  • Husqvarna 326Lx - page 32

    1 T rimmy H II 2 3 4 5 6 7 8 9 7,5 m 25' 2,0-2,4 mm .080-.095" 1 2 15 cm 6" ~ 3,7 m 12' 15 cm 6" ...

  • Husqvarna 326Lx - page 33

    1 T rimmy Hit 23 4 5 6 7 8 9 10 11 “Click” “Click” 7,0 m 23' " 12 cm 5" ~ 3,5 m 1 1' 15 cm 6 " " 2,0-2,4 mm .080-.095 ~ 15 cm 6 ...

  • Husqvarna 326Lx - page 34

    1 T rimmy Hit Pro 2 5 6 7 8 9 10 12 “Click” 3 4 7,5 m 25' 2,0-2,4 mm .080-.095" 15 cm 6" ~ 3,7 m 12' 1.) 2.) 11 15 cm 6" 15 cm 6" ...

  • Husqvarna 326Lx - page 35

    1 Super Auto II Super Auto II 1 2 3 4 5 6 7 8 9 10 4,0 m 13' 2,4 mm .095" ~2,0 m 6,5 ' 6 " 6 " " 15 cm 15 cm ...

  • Husqvarna 326Lx - page 36

    "Clic" 1 2 3 5 6 7 10 11 8,5 m 28' 4 8 4,2 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm S35 ...

  • Husqvarna 326Lx - page 37

    1 2 4 3 2,4-2,7 mm .095-.106" 4,25 m 14' 4,25 m 14' B 6" 15 cm A 6" 15 cm S35 5 ...

  • Husqvarna 326Lx - page 38

    ´®z+HAo¶5;¨ ´®z+HAo¶5;¨ ...

  • Husqvarna 326Lx - page 39

    T35 "Clic" 1 2 3 5 6 7 9 8,5 m 28' 4 8 4,3 m 14' 2,4-2,7 mm .095-.106" 10 cm 4" 6" 15 cm ...

  • Husqvarna 326Lx - page 40

    ´®z+HAo¶5;¨ 2005-07-11 ´®z+HAo¶5;¨ 1140337-95 ...

Manufacturer Husqvarna Category Trimmer

Documents that we receive from a manufacturer of a Husqvarna 326Lx can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- 326Lx manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna 326Lx
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna 326Lx.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna 326Lx, service manual, brief instructions and user manuals Husqvarna 326Lx. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna 326Lx.

Similar manuals

A complete manual for the device Husqvarna 326Lx, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna 326Lx by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna 326Lx.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna 326Lx - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna 326Lx, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna 326Lx, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna 326Lx - which should help us in our first steps of using Husqvarna 326Lx
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna 326Lx
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna 326Lx in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna 326Lx?

Use the form below

If you did not solve your problem by using a manual Husqvarna 326Lx, ask a question using the form below. If a user had a similar problem with Husqvarna 326Lx it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)