Manual Hotpoint WMAQB 741

16 pages 0.79 mb
Download

Go to site of 16

Summary
  • Hotpoint WMAQB 741 - page 1

    GB 1 Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle T echnical data Care and maintenance, 6 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Check ...

  • Hotpoint WMAQB 741 - page 2

    2 GB Installation 2. If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the an- gle of inclination, measured accor ding to the worktop, must not exceed 2°. Levelling your appliance correctly will pr ovide it with stability and avoid any vibrations, noise and shiftin ...

  • Hotpoint WMAQB 741 - page 3

    GB 3 Connecting the drain hose Connect the drain hose, without ben- ding it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot. If it is plac ...

  • Hotpoint WMAQB 741 - page 4

    4 GB ! The power supply cable must only be repla- ced by an authorised serviceman. W ar ning! The company denies all liability if and when these norms are not r espected. The first wash cycle Once the appliance has been installed, and before you use it for the first time, run a wash cycle with detergent and no laundry , using the programme auto cle ...

  • Hotpoint WMAQB 741 - page 5

    GB 5 ...

  • Hotpoint WMAQB 741 - page 6

    6 GB Car e and maintenance Cutting of f the water and electri- city supplies • Turn of f t he wat er tap af ter ev ery wa sh cy cle . Thi s w il l l imi t w ear on th e h ydr aul ic sys tem in - sid e t he wa shi ng mac hin e a nd hel p t o p rev ent lea ks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning ...

  • Hotpoint WMAQB 741 - page 7

    GB 7 Pr ecautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The fol- lowing information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only. • Th is app lia nce ca n b e u sed by ch ild r en ...

  • Hotpoint WMAQB 741 - page 8

    8 GB Detergent dispenser drawer: used to dispense detergents and washing additives ( see “Detergents and laundry” ). ON/OFF button: switches the washing machine on and off. WASH CYCLE knob: programmes the wash cycles. Du- ring the wash cycle, the knob does not move. FUNCTION buttons with indicator light : used to select the available functions. ...

  • Hotpoint WMAQB 741 - page 9

    GB 9 Indicator lights The indicator lights provide important information. This is what they can tell you: Wash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress. Fu nc ti on bu tt on s a nd c or res po nd i ...

  • Hotpoint WMAQB 741 - page 10

    10 GB W ash cycles T able of wash cycles The lengt h of cycle show n on the d ispla y or in th is bo oklet is a n est imati on on ly an d is calcu lated assu ming s tanda rd wo rking cond ition s. Th e act ual d urati on ca n vary accor - ding to f actor s suc h as water temp eratu re an d pre ssure , the amou nt of dete rgent used , the amou nt an ...

  • Hotpoint WMAQB 741 - page 11

    GB 11 Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles ). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. ! Exception: if the 3 program ...

  • Hotpoint WMAQB 741 - page 12

    12 GB Deter gents and laundry Detergent dispenser drawer Successful washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contri- bute to environmental pollution. ! Use powder detergent for white ...

  • Hotpoint WMAQB 741 - page 13

    GB 13 T r oubleshooting Y our washing machine could fail to work. Before contacting the T echnical Assistance Centre ( see “Assistance” ), make sur e that the problem cannot be solved easily using the following list. Problem: The machine does not switch on. The wash cycle does not start. The machine does not fill with wa- ter or the indicator l ...

  • Hotpoint WMAQB 741 - page 14

    14 GB The machine is noisy . The machine wont spin properly . The machine leaks from the dispenser . The machine leaks (other than dispenser). The indicator lights on the console are flashing rapidly . The machine smells. The machine door cannot be opened. Door Seal damaged at the bottom. The water level is too low when the machine is washing. Ther ...

  • Hotpoint WMAQB 741 - page 15

    GB 15 Assistance Guarantee 12 Months Parts and Labour Guarantee Y our appliance has the benefit of our manufacturer’ s guarantee, which covers the cost of br eakdown repairs for twelve months from the date of pur chase. This gives you the reassurance that if, within that time, your appliance is pr oven to be defective because of either workmanshi ...

  • Hotpoint WMAQB 741 - page 16

    16 GB 195122900.00 04/2014 - Xerox Fabriano After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer . Essential Contact Information Hotpoint Service We ar e the largest service team in Eur ope offering you access to 400 skilled telephone advisors and 1000 fully ...

Manufacturer Hotpoint Category Washer

Documents that we receive from a manufacturer of a Hotpoint WMAQB 741 can be divided into several groups. They are, among others:
- Hotpoint technical drawings
- WMAQB 741 manuals
- Hotpoint product data sheets
- information booklets
- or energy labels Hotpoint WMAQB 741
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hotpoint WMAQB 741.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hotpoint WMAQB 741, service manual, brief instructions and user manuals Hotpoint WMAQB 741. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hotpoint WMAQB 741.

Similar manuals

A complete manual for the device Hotpoint WMAQB 741, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hotpoint WMAQB 741 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hotpoint WMAQB 741.

A complete Hotpoint manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hotpoint WMAQB 741 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hotpoint WMAQB 741, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hotpoint WMAQB 741, that we can find in the current document
3. Tips how to use the basic functions of the device Hotpoint WMAQB 741 - which should help us in our first steps of using Hotpoint WMAQB 741
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hotpoint WMAQB 741
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hotpoint WMAQB 741 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hotpoint WMAQB 741?

Use the form below

If you did not solve your problem by using a manual Hotpoint WMAQB 741, ask a question using the form below. If a user had a similar problem with Hotpoint WMAQB 741 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)