English dropdown-ico

Manual Toro 860S

10 pages 0.42 mb
Download

Go to site of 10

Summary
  • Toro 860S - page 1

    Introduction _____________________________________________________________________ The 860S and 880S series full circle and adjustable part-circle rotary sprinklers are designed specifically for golf course applications. Manufactured from durable, high-strength engineering plastic and stainless-steel components, the 800S series sprinklers incorpora ...

  • Toro 860S - page 2

    2 860S Series Sprinkler Performance Data 880 Series Sprinkler Performance Data Sprinkler Application Data Base Nozzle Set Nozzle Set Nozzle Set Nozzle Set Nozzle Set Nozzle Set Nozzle Set Pressure 61 62 63 64 65 66 28.8 63 63 30.1 63 31.5 35.4 71 67 psi GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius 50 14.1 54 18.3 58 ...

  • Toro 860S - page 3

    Installation Procedure ___________________________________________________ To assure maximum performance from your 800S series sprinklers, read these instructions completely prior to installation or service. Constructing Swing Joints 1. Construct or provide triple swing joints for each sprinkler as shown in Figure 1 . Use PVC or ABS pipe nipple for ...

  • Toro 860S - page 4

    Connecting Hydraulic Control T ubing (Hydraulic Models Only) 1. Route control tubing from the controller to the sprinkler location(s). Note: Leave an 18" (45.7 cm) service loop of tubing at each sprinkler to facilitate movement of sprinkler and service operations. Refer to Table 2 for tubing run length and sprinkler elevation information. 2. F ...

  • Toro 860S - page 5

    Arc Adjustment Procedure (Part-circle Models) ________________________________________ The 860S and 880S part-circle models have an adjustable watering arc from 30 °– 330 ° and are factory preset at 180 ° . The left side of the arc, located at the end of counterclockwise rotation, is non-adjustable (fixed). Therefore, all arc adjustments, whet ...

  • Toro 860S - page 6

    SPRINKLER WILL (a) Constant 24 VAC from controller. (Electric Models) NOT SHUT OFF – Check for voltage using a DVM. If voltage is present, disconnect wire. If sprinkler closes, service controller. Refer to Controller Service Manual. (b) Selector cam in manual "ON" position. – Set to "AUTO" or "OFF" position. (c) De ...

  • Toro 860S - page 7

    VALVE WON'T OPEN (a) Control (field) wires severed. (Electric) – Isolate and repair. (b) No power to controller. – Establish controller power. (c) No power from controller to solenoid. – Check for blown fuse and replace. (d) Manual control selector on pilot valve assembly turned to "OFF" position. – Turn to "AUTO" p ...

  • Toro 860S - page 8

    Service Procedures ________________________________________________________________ Servicing Sprinkler Mechanism 1. Remove the cap screw (1) and cap (3). Note: During reassembly, ensure the cap is correctly installed with the Toro Logo positioned over the main nozzle (10). 2. Insert hooked end of multi-purpose tool (P/N 996-83) into slot in snap r ...

  • Toro 860S - page 9

    Servicing Main V alve 1. See Warning above. To remove valve assembly, squeeze snap ring ears together with snap ring pliers (P/N 995-100) and remove snap ring from sprinkler body. See Figure 8 2. Use valve removal tool P/N 995-08 for 860S or 995-09 for 880S to remove valve assembly from base of sprinkler body. Valve removal tool is inserted into sp ...

  • Toro 860S - page 10

    Servicing Pilot V alve Note: Refer to Figure 11 for the following procedure. 1. Make sure that the water supply to sprinkler is positively shut off and any residual pressure has been bled off. If the sprinkler is pressurized, main valve will open when the pilot valve is disconnected from control tube. 2. Carefully remove turf and soil from side of ...

Manufacturer Toro Category Sprinkler

Documents that we receive from a manufacturer of a Toro 860S can be divided into several groups. They are, among others:
- Toro technical drawings
- 860S manuals
- Toro product data sheets
- information booklets
- or energy labels Toro 860S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toro 860S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toro 860S, service manual, brief instructions and user manuals Toro 860S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toro 860S.

Similar manuals

A complete manual for the device Toro 860S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toro 860S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toro 860S.

A complete Toro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toro 860S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toro 860S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toro 860S, that we can find in the current document
3. Tips how to use the basic functions of the device Toro 860S - which should help us in our first steps of using Toro 860S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toro 860S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toro 860S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toro 860S?

Use the form below

If you did not solve your problem by using a manual Toro 860S, ask a question using the form below. If a user had a similar problem with Toro 860S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)