English dropdown-ico

Manual Miele DA 403

36 pages Not applicable
Download

Go to site of 36

Summary
  • Miele DA 403 - page 1

    Operating and Installation Instructions Ventilation System DA 403 To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 07 261 021 en - US, CA ...

  • Miele DA 403 - page 2

    IMPORTANT SAFETY INSTRUCTIONS Functional description Guide to the Ventilation System Operation Turning on the fan .................................................1 0 Selecting the power level ............................................1 0 Delayed Shut Down ................................................1 2 Turning off the fan ................... ...

  • Miele DA 403 - page 3

    READ AND SAVE THESE INSTRUCTIONS Keep these instructions in a safe place and pass them on to any future user. Read these instructions carefully before installing or using the Ventilation System. ~ This appliance is intended for residential use only. Use the appliance only for its intended purpose. ~ This appliance complies with current safety requi ...

  • Miele DA 403 - page 4

    ~ d) Before connecting the appliance to the power supply make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent appliance damage. If in doubt consult a qualified electrician. ~ e) Installation work and repairs should only be performed by a qualified tec ...

  • Miele DA 403 - page 5

    , WARNING TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING * : ~ a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS . If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. ~ b) NEVER PICK UP A FLAM ...

  • Miele DA 403 - page 6

    Installation , WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: ~ a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. ~ b) Sufficient air is needed for combustion and exhausting of gase ...

  • Miele DA 403 - page 7

    The hood offers two modes of operation: Air extraction The air is drawn in and cleaned by the grease filters and directed outside. The hood comes equipped with a non-return flap . This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur. When the hood is turned on, the air pressure of the ...

  • Miele DA 403 - page 8

    Guide to the Ventilation System 8 ...

  • Miele DA 403 - page 9

    a Chimney extension b Chimney c Canopy d Grease filter e Charcoal filter optional accessory f Recirculation vent g Control panel h Overhead lighting i Light button This button turns the light on and off and also dims the light. The lighting can be used independently from the fan. j On/Off button k Fan power selection Four fan speed selection l Dela ...

  • Miele DA 403 - page 10

    Turning on the fan ^ Press the On/Off button. Selecting the power level ^ Use the " – / + " controls to select the desired power level. + = increases the fan speed – = decreases the fan speed Level "1" to "3" (green indicators) are usually sufficient for normal cooking. Intensive setting Level "4" (yellow ...

  • Miele DA 403 - page 11

    If the power level indicators flash the automatic switch back is not activated. ^ To activate the automatic switch back press the " + " button. The power level indicators light. ^ To deactivate the automatic switch back press the " – " button. ^ To save the setting press the Delayed Shut down button. If the procedure is not st ...

  • Miele DA 403 - page 12

    Delayed Shut Down If odors or smoke remain in the kitchen after cooking has been completed, the Delayed Shut Down feature can be selected to allow the hood to continue running for either 5 or 15 minutes. ^ Press the Delayed Shut Down button while the fan is still running. Press once = 5 minute delay (left indicator lights) Press twice = 15 minute d ...

  • Miele DA 403 - page 13

    Turning the lighting On/Off The overhead lighting can be turned on and off independently from the fan. ^ Press the light button briefly to turn on the lighting. The light button indicator illuminates. ^ Press the light button briefly again to turn off the lighting. The light button indicator will go out. Dimming the lighting The brightness of the l ...

  • Miele DA 403 - page 14

    Filter timers Grease filters A timer monitors the hours of fan operation. The indicator for the grease filter will light after 30 hours of operation. The grease filters must then be cleaned. After the grease filters have been cleaned and put back in place, the grease filter timer must be reset. ^ To do this, press the grease filter button for appro ...

  • Miele DA 403 - page 15

    Reprogramming the timers The grease filter timer is preset to 30 hours. This time can be lengthened or shortened to 20, 30, 40, or 50 hours. – A time of 20 hours should be programmed in kitchens with frequent pan or deep frying. – A time of 20 hours should also be programmed if the kitchen is only used occasionally to prevent grease which has a ...

  • Miele DA 403 - page 16

    Reprogramming the charcoal filter timer The active charcoal filter can only be used in recirculation mode and cannot be used to exhaust fumes. The charcoal filter timer is not preset . Before using the hood in recirculation mode, the charcoal filter timer must be programmed. ^ Turn off the fan using the On/Off button. ^ Press the Delayed Shut Down ...

  • Miele DA 403 - page 17

    , WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see "Important Safety Instructions". Cleaning the casing Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the hood. They will dam ...

  • Miele DA 403 - page 18

    Grease filters The reusable metal grease filters remove solid particles from the vented kitchen air (grease, dust, etc). The grease filters should be cleaned ever y3-4 weeks or when the grease filter indicator lights. , A dirty filter is a fire hazard. ^ To remove the grease filters pull the locking clips, 1 , forward. Lower the filter 45°, 2 , un ...

  • Miele DA 403 - page 19

    Active charcoal filter In recirculation mode an active charcoal filter must be used in addition to the grease filters. The charcoal filter is designed to absorb cooking odors. The active charcoal filter will be replaced in the canopy above the grease filters. Replacement active charcoal filters can be ordered from Miele. ^ Remove the grease filters ...

  • Miele DA 403 - page 20

    Changing the light bulbs , WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Before changing the light bulbs, disconnect the hood from the power supply, see "Important Safety Instructions". When in use halogen bulbs become extremely hot, and can burn your hands. Do not attempt to change the b ...

  • Miele DA 403 - page 21

    Repairs In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department. ^ When contacting the Technical Service Department, please quote the model and serial number of your appliance. These are shown on the data plate which is visible when the grease filters are removed. MieleCare (USA only) Miel ...

  • Miele DA 403 - page 22

    22 ...

  • Miele DA 403 - page 23

    Installation Instructions Read these instructions and the "Important Safety Instructions" before installing this hood. The installation steps are described in the enclosed "Installation Diagram". Leave these instructions with this appliance for the consumer/user. ...

  • Miele DA 403 - page 24

    24 ...

  • Miele DA 403 - page 25

    Disposal of packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. , DANGER Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Disposal ...

  • Miele DA 403 - page 26

    1) Alternative positions for feeding through the power cord 2) Vent installed upwards for recirculation mode Exhaust connection 6" (150 mm) diameter (not for recirculation mode) Appliance dimensions 26 ...

  • Miele DA 403 - page 27

    Distance between cooktop and hood (S) Do not install this exhaust hood over cooktops burning solid fuel. Provided a larger distance is not given by the manufacturer of the cooktop, follow the minimum safety distances between a cooktop and the bottom of the hood: Miele cooktops: - 24" (610 mm) above electric surfaces, - 26" (660 mm) above ...

  • Miele DA 403 - page 28

    The ceiling mounting plate will support the weight of the hood. This ceiling plate must be attached to rigid structural framing that is supported in its entirety by the ceiling joists, or to the ceiling joists directly. Do not attach the plate directly to the ceiling with anchors, toggle bolts, etc. , CAUTION When cutting or drilling into the wall ...

  • Miele DA 403 - page 29

    Installation instructions ^ See the enclosed installation instruction diagram. ^ Please read the "Important Safety Instructions" and Installation instructions before installing this hood. Protective film The casing is covered with a protective film to prevent scratching during transport. ^ Peel off the film before installing the casing pa ...

  • Miele DA 403 - page 30

    , WARNING Danger of toxic fumes. Gas cooking appliances release carbon monoxide that can be harmful or fatal if inhaled. To reduce the risk of fire and to properly exhaust air, the exhaust gases extracted by the hood should be vented outside of the building only. Do not vent exhaust air into spaces within walls or ceilings or in attics, crawl space ...

  • Miele DA 403 - page 31

    If the exhaust is ducted into an inactive flue, the air must be expelled parallel to the flow direction of the flue. Never connect an exhaust hood to an active chimney, dryer vent, vent flue, or room venting ductwork. Seek professional advice before connecting an exhaust hood vent to an existing, inactive chimney or vent flue. Important! If the duc ...

  • Miele DA 403 - page 32

    , WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: All electrical work should be performed by a qualified electrician in strict accordance with national regulations (for USA: ANSI-NFPA 70) and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. Ens ...

  • Miele DA 403 - page 33

    Maximum load ...............4 3 0W Lighting ..................4x2 0W Voltage .....................1 2 0V Frequency ..................6 0H z Circuit rating ..................1 5A Weight ............. 96.1 lb (43.6 kg) Technical data 33 ...

  • Miele DA 403 - page 34

    34 ...

  • Miele DA 403 - page 35

    35 ...

  • Miele DA 403 - page 36

    M.-Nr. 07 261 021 / 00 Alteration rights reserved / 1109 For most the updated manual see the Miele website. ...

Manufacturer Miele Category Exhaust hood

Documents that we receive from a manufacturer of a Miele DA 403 can be divided into several groups. They are, among others:
- Miele technical drawings
- DA 403 manuals
- Miele product data sheets
- information booklets
- or energy labels Miele DA 403
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele DA 403.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele DA 403, service manual, brief instructions and user manuals Miele DA 403. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele DA 403.

Similar manuals

A complete manual for the device Miele DA 403, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele DA 403 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele DA 403.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele DA 403 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele DA 403, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele DA 403, that we can find in the current document
3. Tips how to use the basic functions of the device Miele DA 403 - which should help us in our first steps of using Miele DA 403
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele DA 403
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele DA 403 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele DA 403?

Use the form below

If you did not solve your problem by using a manual Miele DA 403, ask a question using the form below. If a user had a similar problem with Miele DA 403 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)