Manual Transition Networks 48 VDC-TO-12VDC SPS-48V

4 pages 0.24 mb
Download

Go to site of 4

Summary
  • Transition Networks 48 VDC-TO-12VDC SPS-48V - page 1

    COMPLIANCE INFORMA TION UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in ...

  • Transition Networks 48 VDC-TO-12VDC SPS-48V - page 2

    INST ALLA TION NOTE: The TRANSITION Networks 48-to-12 VDC External Power Supply is shipped with four (4) attached feet. 1. For installation, place on any well-ventilated table-top or shelf with access to a 48 VDC power source. 2. Connect barrel connector attached to 12 VDC cord on External Power Supply to media converter or similar device CAUTION: ...

  • Transition Networks 48 VDC-TO-12VDC SPS-48V - page 3

    TECHNICAL SPECIFICA TIONS Input Input Voltage 48 VDC Inrush Current 0.20 A (peak cold start) Hold-Up Time 20 msec minimum at full load and nominal input voltage Isolation Voltage (Dielectric withstand) Meets IEC 960 for one minute. 1,500 VAC: Output/Input 500 VAC: Input/Safety GND 500 VAC: Output/Safety GND Output Output Voltage 12 VDC Output Curre ...

  • Transition Networks 48 VDC-TO-12VDC SPS-48V - page 4

    MAINTENANCE Replacing Power Supply Module Fuse CAUTION: Wear a grounding device and observe electrostatic discharge precautions when replacing the fuse in the 48-to-12 VDC External Power Supply. Failure to observe this caution could result in damage to, and subsequent failure of, the 48-to-12 VDC External Power Supply. CAUTION: Replace fuse only wi ...

Manufacturer Transition Networks Category Power Supply

Documents that we receive from a manufacturer of a Transition Networks 48 VDC-TO-12VDC SPS-48V can be divided into several groups. They are, among others:
- Transition Networks technical drawings
- 48 VDC-TO-12VDC SPS-48V manuals
- Transition Networks product data sheets
- information booklets
- or energy labels Transition Networks 48 VDC-TO-12VDC SPS-48V
All of them are important, but the most important information from the point of view of use of the device are in the user manual Transition Networks 48 VDC-TO-12VDC SPS-48V.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Transition Networks 48 VDC-TO-12VDC SPS-48V, service manual, brief instructions and user manuals Transition Networks 48 VDC-TO-12VDC SPS-48V. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Transition Networks 48 VDC-TO-12VDC SPS-48V.

A complete manual for the device Transition Networks 48 VDC-TO-12VDC SPS-48V, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Transition Networks 48 VDC-TO-12VDC SPS-48V by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Transition Networks 48 VDC-TO-12VDC SPS-48V.

A complete Transition Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Transition Networks 48 VDC-TO-12VDC SPS-48V - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Transition Networks 48 VDC-TO-12VDC SPS-48V, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Transition Networks 48 VDC-TO-12VDC SPS-48V, that we can find in the current document
3. Tips how to use the basic functions of the device Transition Networks 48 VDC-TO-12VDC SPS-48V - which should help us in our first steps of using Transition Networks 48 VDC-TO-12VDC SPS-48V
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Transition Networks 48 VDC-TO-12VDC SPS-48V
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Transition Networks 48 VDC-TO-12VDC SPS-48V in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Transition Networks 48 VDC-TO-12VDC SPS-48V?

Use the form below

If you did not solve your problem by using a manual Transition Networks 48 VDC-TO-12VDC SPS-48V, ask a question using the form below. If a user had a similar problem with Transition Networks 48 VDC-TO-12VDC SPS-48V it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)