English dropdown-ico

Manual Vulcan-Hart TK65

12 pages 0.31 mb
Download

Go to site of 12

Summary
  • Vulcan-Hart TK65 - page 1

    INST ALLA TION & OPERA TION MANUAL VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 FORM 30608 (Rev. A, 8-95) TK SERIES ST ANDARD AND FIL TER-READY GAS FR YERS STANDARD FILTER-READY MODEL FRYER FRYER TK35 ML-52096 ML-52062 TK45 ML-52097 ML-52063 TK65 ML-52098 ML-52064 MODEL TK35 ...

  • Vulcan-Hart TK65 - page 2

    — 2 — IMPORT ANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OB ...

  • Vulcan-Hart TK65 - page 3

    — 3 — Installation, Operation and Care of TK SERIES ST ANDARD & FIL TER-READY GAS FR YERS KEEP THIS MANUAL FOR FUTURE REFERENCE GENERAL Vulcan-Hart TK Series Fryers are available in three different models with varying capacities: Product Lb Total Lb Model Per Basket of Product TK35 1 1 / 2 3 TK45 2 1 / 2 5 TK65 3 6 Your Vulcan-Hart Gas Frye ...

  • Vulcan-Hart TK65 - page 4

    — 4 — LOCATION The equipment area must be kept free and clear of combustible substances. Minimum clearance from combustible and non-combustible construction is 6" from the sides and 6" from the back of the fryer. There must be at least 16" clearance between the fryer and any open top flame units. Adequate clearances for servicing ...

  • Vulcan-Hart TK65 - page 5

    — 5 — Fig. 1 If it is necessary to disconnect the restraint, turn off the gas supply before disconnection. Reconnect the restraint before turning the gas supply on and returning the fryer to its installation position. Instructions for installing casters to the fryer are included with the casters. GAS CONNECTIONS CAUTION: All gas supply connecti ...

  • Vulcan-Hart TK65 - page 6

    — 6 — TESTING THE GAS SUPPLY PIPING SYSTEM When test pressures exceed 1 / 2 psig (3.45 kPa), the fryer and its individual shutoff valve must be disconnected from the gas supply piping system. When test pressures are 1 / 2 psig (3.45 kPa) or less, the fryer must be isolated from the gas supply piping system by closing its individual shutoff valv ...

  • Vulcan-Hart TK65 - page 7

    — 7 — OPERA TION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT FRYING COMPOUND CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL FRYING COMPOUND FROM THE TANK. PRIOR TO FIRST USE Cleaning the Fryer Using a non-corrosive, grease-dissolving commercial clea ...

  • Vulcan-Hart TK65 - page 8

    — 8 — Melting solid shortening in the fry tank is not recommended. The fry tank will be damaged and the shortening will be scorched. Do not overfill fry tank. Keep level of shortening at "oil level" line in fry tank. Add fresh shortening as needed. USING THE FRYER A high limit device will shut the fryer down should the shortening over ...

  • Vulcan-Hart TK65 - page 9

    — 9 — Turning the Fryer On CAUTION: Before turning burners on, fry tank must be filled with liquid shortening. If this is not done, the tank walls can be damaged. Warpage can cause leaks. To turn the fryer ON, set the thermostat knob to the desired temperature. When the set temperature is reached, the gas control shuts off gas flow into the bur ...

  • Vulcan-Hart TK65 - page 10

    — 10 — When frying is completed, remove baskets or product. Hang baskets on rear basket hangers. Remove food and season it. Do not salt food over the shortening because salt could cause a chemical change in the oil. Add approximately 15% new oil daily. Keep level of shortening at oil level line in fry tank. Add fresh shortening as needed. DAILY ...

  • Vulcan-Hart TK65 - page 11

    — 11 — 10. Pour the strained shortening back into the fry tank. 11. Add shortening to bring the oil level to the "oil level" line. Filter-Ready TK Fryers Only For filtering instructions of the filter-ready TK Fryers, refer to the MOBILE FILTER SYSTEM OPERATING MANUAL. This manual is supplied with each mobile filter system. Check tank ...

  • Vulcan-Hart TK65 - page 12

    — 12 — 5. Close the drain valve and refill the tank with water. Add 1 cup of vinegar to neutralize alkaline left by the cleaner. Bring the solution to a boil and allow it to stand for a few minutes. 6. Drain the tank and rinse thoroughly with clear, hot water. All traces of cleaner must be removed. Dry the tank thoroughly. 7. Close the drain va ...

Manufacturer Vulcan-Hart Category Fryer

Documents that we receive from a manufacturer of a Vulcan-Hart TK65 can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- TK65 manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart TK65
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart TK65.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart TK65, service manual, brief instructions and user manuals Vulcan-Hart TK65. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart TK65.

Similar manuals

A complete manual for the device Vulcan-Hart TK65, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart TK65 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart TK65.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart TK65 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart TK65, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart TK65, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart TK65 - which should help us in our first steps of using Vulcan-Hart TK65
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart TK65
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart TK65 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart TK65?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart TK65, ask a question using the form below. If a user had a similar problem with Vulcan-Hart TK65 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)