English dropdown-ico

Manual HP (Hewlett-Packard) B4250

16 pages 0.17 mb
Download

Go to site of 16

Summary
  • HP (Hewlett-Packard) B4250 - page 1

    EAZ0012L02A (01/16/2008) REV A. INSTALLATION OVERVIEW: ______________________________________________ These instructions are for the installation of an Off- the-Shelf Oki B4 400 printer for all OBIS Analyzers, SIS Machine Bar 97 Analyzers, Sun Machi nes and MCS-2500 for Pep Boy units. Wh en installing this new printer a Utility Disk, will be needed ...

  • HP (Hewlett-Packard) B4250 - page 2

    Page 2 of 16 EAZ0012L02A (01/16/2008) REV A. REQUIRED TOOLS: _____________________________________________________ • Complete Tool Kit INSTALLATION INSTRUCTIONS: __________________________________________ See Table below for analyzer installation instructions: All OBIS Analyzers Installing Oki B4400 Printer on OBIS Page 3 SIS Machine (Win 95 or W ...

  • HP (Hewlett-Packard) B4250 - page 3

    Page 3 of 16 EAZ0012L02A (01/16/2008) REV A. INSTALLING OKI B4400 PRINTER on OBIS: _________________________________ Removing old Printer Icons 1. Leave old or defective Printer Installed and turned on durin g this next part. 2. Turn computer on, and log in as PC . Do not enter in a password. 3. Select Start ⇒ Settings ⇒ Printers . Right click ...

  • HP (Hewlett-Packard) B4250 - page 4

    Page 4 of 16 EAZ0012L02A (01/16/2008) REV A. 14. Follow the on-screen instructions until the driv ers and Status monito r software is completely loaded. 15. After the software has been loaded, the screen will pr ompt you to connect the new printer with the power off. (Don’t forget to connect the USB cable to the printer). 16. Next turn On the Pri ...

  • HP (Hewlett-Packard) B4250 - page 5

    Page 5 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 PRINTER on SIS ANALYZERS with WIN 9X OS (Ontario GAS & HD; Virginia SIS): __________________________________________________________ NOTE: A SEPARATE SHEET METAL DRAWER KIT (EAK0226L00A) MAY BE REQUIRED , WHEN REPLACING AN EXISTING O KIDATA 6E, 10E OR 14E PRINTER WITH A N O KI B4400 PRINTER ...

  • HP (Hewlett-Packard) B4250 - page 6

    Page 6 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 Printer on SIS (BAR 97) ; DOS 6.22 for NJ; PA; TX, NC, CA (BAR 97 ONLY): _______________________________________________________________ NOTE: A SEPARATE SHEET METAL DRAWER KIT (EAK0226L00A) IS REQUIRED , WHEN REPLACING AN EXISTING HP D ESK J ET ; OKI 6E; OKI 10E OR OKI 14E PRINTE R WITH AN O K ...

  • HP (Hewlett-Packard) B4250 - page 7

    Page 7 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 PRINTER on SIS with SUN MACHINE Version 3.3; 5.0 w ith WIN 9X OS: 1. Leave old or defective printer connected at this time. 2. Power up the Analyzer using the rea r panel "Main Power" Switch. 3. Once the Emissions Software has loade d select, "PC OPTION" and press <Y > ...

  • HP (Hewlett-Packard) B4250 - page 8

    Page 8 of 16 EAZ0012L02A (01/16/2008) REV A. 24. From the desktop, select Star t ⇒ Programs ⇒ MS DOS Prompt . 25. At the DOS prompt type $?6QDSRQ and press <ENTER> . 26. A message indicating 1 file copied should be displa yed, if not you are not in the correct drive or the floppy disk is bad, verify the problem and retry running the Sn ...

  • HP (Hewlett-Packard) B4250 - page 9

    Page 9 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 PRINTER on SIS with SUN MA CHINE Version 3.3 w ith DOS OS: NOTE: M AKE SURE O KI B4400 PRINTER IS INSTALLED , AND THE AC POWER CORD AND THE E XISTING DATA CABLE ARE CONNECTED TO THE O KI B4400 PRINTER . E NSURE THE P RINTER IS TURNED ON (1) POSITION . 1. Power up the Analyzer using the rea r pa ...

  • HP (Hewlett-Packard) B4250 - page 10

    Page 10 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 PRINTER on MCS 2500 Pep Boys: _______________________________ NOTE: A SEPARATE SHEET METAL DRAWER KIT (EAK0226L10A) IS REQUIRED , WHEN REPLACING AN EXISTING OKI 6E; OKI 10E OR OKI 14E PRINTER WITH AN O KI B4400 PRINTER . O RDER AND INSTALL THIS KIT FIRST , BEFORE CONTINUING . T HIS KIT IS N OT ...

  • HP (Hewlett-Packard) B4250 - page 11

    Page 11 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 PRINTER on SUN MACHINE ANALYZERS with WIN 9X: _____________ NOTE: A separate sheet metal dra wer kit (EAK0226L10A) is required, when replacing an existing HP DeskJet; OK I 6E; OKI 10E or OKI 14E PRINTER with AN Oki B4400 printer. Order and install this kit first, before continuing. T HIS KIT I ...

  • HP (Hewlett-Packard) B4250 - page 12

    Page 12 of 16 EAZ0012L02A (01/16/2008) REV A. 29. From the A: prompt type “ Snapon” and press <ENTER> . 30. A message indicating 1 file copied should be displa yed, if not you are not in the correct drive or the floppy disk is bad, verify the problem and retry running the snapon batch file. 31. Exit the DOS window by typing H[LW at the DO ...

  • HP (Hewlett-Packard) B4250 - page 13

    Page 13 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 PRINTER SUN MACHINE A NALYZERS with DOS 6.22: ______________ NOTE: A separate sheet metal dra wer kit (EAK0226L10A) is required, when replacing an existing HP DeskJet; OK I 6E; OKI 10E or OKI 14E PRINTER with AN Oki B4400 printer. Order and install this kit first, before continuing. T HIS KIT ...

  • HP (Hewlett-Packard) B4250 - page 14

    Page 14 of 16 EAZ0012L02A (01/16/2008) REV A. OKI B4400 PRINTER INSTALLATION VERIFICATION: _________________________ • Printer Power LED is on, no blinking or red LED’s should be seen • Upon Power up the printer should initialize • Test Page should be printed with no errors. • Perform Print Screen Test after installation is complete to ve ...

  • HP (Hewlett-Packard) B4250 - page 15

    Page 15 of 16 EAZ0012L02A (01/16/2008) REV A. PRINTER INSTALLATION TROUBLESHOOTING: _____________________________ Fault Resolution No Printer Power LED On Check AC Cord Connectio n from the Source to the Printer Printer does not print (No Error LEDS) Check data printer cabl e or USB connection from the computer to the printer. Unplug and plug it ba ...

  • HP (Hewlett-Packard) B4250 - page 16

    Page 16 of 16 EAZ0012L02A (01/16/2008) REV A. Fault Resolution Fuzzy print. Dirty LED array. Clean LED array. The LED array is on the underside of the printer cover. Wipe it gently with the cleaning pad that is incl uded in the toner cartridge kit. You can also use a clean, soft cloth with a small amount of rubbing alcohol on it Printer does not pr ...

Manufacturer HP (Hewlett-Packard) Category Printer

Documents that we receive from a manufacturer of a HP (Hewlett-Packard) B4250 can be divided into several groups. They are, among others:
- HP (Hewlett-Packard) technical drawings
- B4250 manuals
- HP (Hewlett-Packard) product data sheets
- information booklets
- or energy labels HP (Hewlett-Packard) B4250
All of them are important, but the most important information from the point of view of use of the device are in the user manual HP (Hewlett-Packard) B4250.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals HP (Hewlett-Packard) B4250, service manual, brief instructions and user manuals HP (Hewlett-Packard) B4250. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product HP (Hewlett-Packard) B4250.

Similar manuals

A complete manual for the device HP (Hewlett-Packard) B4250, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use HP (Hewlett-Packard) B4250 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of HP (Hewlett-Packard) B4250.

A complete HP (Hewlett-Packard) manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual HP (Hewlett-Packard) B4250 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the HP (Hewlett-Packard) B4250, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the HP (Hewlett-Packard) B4250, that we can find in the current document
3. Tips how to use the basic functions of the device HP (Hewlett-Packard) B4250 - which should help us in our first steps of using HP (Hewlett-Packard) B4250
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with HP (Hewlett-Packard) B4250
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of HP (Hewlett-Packard) B4250 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning HP (Hewlett-Packard) B4250?

Use the form below

If you did not solve your problem by using a manual HP (Hewlett-Packard) B4250, ask a question using the form below. If a user had a similar problem with HP (Hewlett-Packard) B4250 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)