English dropdown-ico

Manual Hobart AM14C ML-32615

20 pages 1.04 mb
Download

Go to site of 20

Summary
  • Hobart AM14C ML-32615 - page 1

    MODEL AM14 & AM14C DISHWASHERS MODELS AM14 ML-32614 AM14C ML-32615 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34123 Rev. C (Oct. 2000) ...

  • Hobart AM14C ML-32615 - page 2

    – 2 – POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OBTAINED FROM THE LOCAL GAS SUPPLIER. IMPORT ANT IN THE EVENT A GAS ODOR IS DETECTED, SHUT DOWN UNIT(S) AT MAIN SHUTOFF VALVE AND CONTACT THE LOCAL GAS COMPANY OR GAS SUPPLIER FOR SERVICE. FOR YOUR SAFETY DO NOT ...

  • Hobart AM14C ML-32615 - page 3

    – 3 – TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 UNPACKING . . . . . . . . . . . . . . . . . . . . ...

  • Hobart AM14C ML-32615 - page 4

    – 4 – Installation, Operation, and Care of MODEL AM14 & AM14C DISHW ASHERS SA VE THESE INSTRUCTIONS GENERAL The AM14 dishwashers are semi-automatic rack-type machines. On model AM14, the doors open on opposite sides of the machine allowing the rack to move straight through. Model AM14C can be located in a corner; adjacent doors open so the ...

  • Hobart AM14C ML-32615 - page 5

    – 5 – Available as an optional accessory is a frame-mounted 10KW electric booster to maintain a minimum final rinse temperature of 180 ° F. Also available as an optional accessory is the model IB57 Infrared Booster Gas Water Heater. Also available are circuit breaker(s) and/or single point electrical connection options. INST ALLA TION UNPACKIN ...

  • Hobart AM14C ML-32615 - page 6

    – 6 – WATER REQUIREMENTS Proper water quality can improve ware washing performance by reducing spotting, lowering chemical supply costs, enhancing effectiveness of labor, and extending equipment life. Local water conditions vary from one location to another. The recommended proper water treatment for effective and efficient use of this equipmen ...

  • Hobart AM14C ML-32615 - page 7

    – 7 – With Electric Booster Water Heater The water supply line is connected to the booster (Fig. 6) with 3 / 4 " pipe. The water supply should have a minimum temperature of 120 ° F – 140 ° F, and a flowing pressure of 15 – 25 psig at the pressure gauge tee beside the solenoid valve. If the flowing pressure exceeds 25 psig, a pressure ...

  • Hobart AM14C ML-32615 - page 8

    – 8 – The dishwasher must be installed so that the flow of combustion and ventilation air will not be obstructed. Adequate clearances for air openings into the combustion chamber must be provided. Make sure there is an adequate supply of make-up air in the room to allow for combustion of the gas at the burner(s). Keep the appliance area free an ...

  • Hobart AM14C ML-32615 - page 9

    – 9 – RATE OF EXHAUST FLOW CALCULATIONS Based on the 1996 International Mechanical Code. The Rate of air flow required for a vent hood is calculated using the following definitions: Q = Rate of Air Flow in Cubic Feet Per Minute or [ CFM ] Required for the Hood. A = Area of Hood Opening in Feet 2 = (L x W) D = Clearance Height = Distance in Feet ...

  • Hobart AM14C ML-32615 - page 10

    – 10 – STEAM HEAT (When Specified) A 3 / 4 " union connection for the steam supply line is located at the lower right side of the machine. The steam supply must have a flowing pressure of 15 – 20 psig. Steam flow is controlled by a solenoid valve, as well as a mechanical ball valve. The ball valve should be closed when the dishwasher is ...

  • Hobart AM14C ML-32615 - page 11

    – 11 – Electric Booster Water Heater Option NOTE : Electric Booster electrical connection will be separate from the dishwasher electrical connection unless single point electrical connection is supplied. If circuit breaker option is provided, the electric supply or supplies are connected to the circuit breaker box on top of the dishwasher. Refe ...

  • Hobart AM14C ML-32615 - page 12

    – 12 – A T A D L A C I R T C E L EA T A D L A C I R T C E L E A T A D L A C I R T C E L E A T A D L A C I R T C E L EA T A D L A C I R T C E L E l e d o Ml e d o M l e d o M l e d o Ml e d o Mh P / z H / s t l o Vh P / z H / s t l o V h P / z H / s t l o V h P / z H / s t l o Vh P / z H / s t l o Vt a e H k n a Tt a e H k n a T t a e H k n a T ...

  • Hobart AM14C ML-32615 - page 13

    – 13 – OPERA TION PREPARATION Place the pump strainer (when equipped), overflow tube, overflow cover, end cover, slanted strainer, and the strainer bucket in their respective positions, (Fig. 7). Fig. 7 An automatic detergent dispenser is recommended. Closely follow supplier's instructions. If no automatic dispenser is used, scatter the in ...

  • Hobart AM14C ML-32615 - page 14

    – 14 – PL-40416-1 Reset Button Rinse T emperature Adjustment Screw DISHWASHING Scrape the dishes to remove large particles of food and debris. Never use steel wool on ware to be loaded into the dishmachine. Fig. 9 Stack the dishes in a rack. Do not stack dishes one on top of another as water must have free access to all sides of every dish. Sta ...

  • Hobart AM14C ML-32615 - page 15

    – 15 – CLEANING T he machine must b e thoroughly cleaned at the end of each working shift or at least daily. Never use steel wool to clean warewasher surfaces. Use only products formulated to be safe on stainless steel. Turn off the power switch. If the machine has steam heat, close the manually operated steam ( ball) valve. Open the machine do ...

  • Hobart AM14C ML-32615 - page 16

    – 16 – DOs AND DON'Ts FOR YOUR NEW HOBART WAREWASHER DO assure proper water hardness (4 – 6 grains per gallon is recommended). DO pre-scrap dishes thoroughly. DO use only detergents recommended by your chemical professional. DO at the end of the day, thoroughly cleanse the machine, rinse, and dry (leave doors open). DO closely follow you ...

  • Hobart AM14C ML-32615 - page 17

    – 17 – MAINTENANCE WARNING : DISCONNECT ELECTRICAL POWER SUPPLY (BOTH DISHWASHER AND BOOSTER IF APPLICABLE) AND PLACE A TAG(S) AT THE DISCONNECT SWITCH(ES) TO INDICATE THE CIRCUIT(S) ARE BEING WORKED ON BEFORE BEGINNING ANY MAINTENANCE PROCEDURE. WASH ARMS Upper and lower wash and rinse arms (Figs. 11, 12) should turn freely and continue turnin ...

  • Hobart AM14C ML-32615 - page 18

    – 18 – To avoid a service call, check symptoms and related possible causes. If machine still does not operate properly, contact Service. SYMPTOM POSSIBLE CAUSE No machine operation. 1. Blown fuse or tripped circuit breaker at power supply. 2. Machine control is in MANUAL mode. 3. Check tank water level. Dishes not clean. 1. Insufficient wash wa ...

  • Hobart AM14C ML-32615 - page 19

    – 19 – SYMPTOM POSSIBLE CAUSE Inadequate rinse. 1. Dirty line strainer causing reduced water flow. Turn off water supply, remove strainer cap, withdraw and clean screen. Reassemble. 2. Low supply line pressure. 3. Excessive mineral deposits throughout wash and rinse system. Deliming may be necessary. 4. Incoming water temperature to booster (if ...

  • Hobart AM14C ML-32615 - page 20

    – 20 – SERVICE Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment. If a gas orifice fitting is to be adjusted or replaced, have it serviced by qualified Hobart- authorized service personnel. Long-term service contracts are available on this and other Hobart products. FORM 34123 Rev. C (Oc ...

Manufacturer Hobart Category Dishwasher

Documents that we receive from a manufacturer of a Hobart AM14C ML-32615 can be divided into several groups. They are, among others:
- Hobart technical drawings
- AM14C ML-32615 manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart AM14C ML-32615
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart AM14C ML-32615.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart AM14C ML-32615, service manual, brief instructions and user manuals Hobart AM14C ML-32615. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart AM14C ML-32615.

Similar manuals

A complete manual for the device Hobart AM14C ML-32615, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart AM14C ML-32615 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart AM14C ML-32615.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart AM14C ML-32615 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart AM14C ML-32615, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart AM14C ML-32615, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart AM14C ML-32615 - which should help us in our first steps of using Hobart AM14C ML-32615
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart AM14C ML-32615
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart AM14C ML-32615 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart AM14C ML-32615?

Use the form below

If you did not solve your problem by using a manual Hobart AM14C ML-32615, ask a question using the form below. If a user had a similar problem with Hobart AM14C ML-32615 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)