English dropdown-ico

Manual Samson MDR1064

24 pages Not applicable
Download

Go to site of 24

Summary
  • Samson MDR1064 - page 1

    MDR Series Mixers TEN CHANNEL MIXER ...

  • Samson MDR1064 - page 2

    Safety Instructions/Consignes de sécurité/Sicherheitsvor kehrungen/Instr ucciones de seguridad ACHTUNG: Um die Gefahr eines Brandes oder Stromschlags zu verringern, soll- ten Sie dieses Gerät weder Regen noch Feuchtigkeit aussetzen.Um die Gefahr eines Stromschlags zu verringern, sollten Sie weder Deckel noch Rückwand des Geräts entfernen. Im I ...

  • Samson MDR1064 - page 3

    T able of Contents Introduction 2 MDR1064 Features 3 Front and Rear Panel Layout 4 Front and Rear Panel Controls 5 Controls and Functions Mono/Stereo Input Channel Section 6–7 Master Section 8–9 MDR1064 Input and Output Connections 10–1 1 Operating the MDR1064 12–14 System Set-ups 15–16 MDR1064 Wiring Guide 17 Specifications 18 Block Diag ...

  • Samson MDR1064 - page 4

    2 Congratulations on your purchase of the Samson MDR1064 mixer! The MDR1064 is a ten-channel mixer, with six low noise microphone pre-amps. The six Mic/line inputs and two stereo inputs each feature a 3-band equalizer plus two Aux sends. The MDR1064’s master section includes two stereo Aux returns and a 2-tack Input and Output for playing back st ...

  • Samson MDR1064 - page 5

    3 MDR1064 F eatures The Samson MDR1064, ten-channel mixer is a comprehensive, all-in-one solution for live sound, recording, fixed installation and post production applications. Here are some of its main features: • Eight Channels – Six Mic/Line plus two Stereo inputs with mic pre’s. • Flexible design topology ideal for live sound, recordin ...

  • Samson MDR1064 - page 6

    4 F ront and Rear P anel La yout ...

  • Samson MDR1064 - page 7

    5 F ront and Rear P anel Controls FRONT PANEL 1 MIC IN – Input connector for Low-Noise Microphone pre- amp. 2 LINE IN –Input connector for Line level inputs. 3 INSERT – 1/-4-inch TRS (TIP/RING/SLEEVE) connector providing send and recieve channel patch point for out- board effects. 4 GAIN – Used to set the input level of the mic pre and line ...

  • Samson MDR1064 - page 8

    6 Controls and Functions MONO/STEREO INPUT CHANNEL SECTION The following section details each part of the MDR1064’s MONO INPUT CHANNELS including the GAIN con- trol, LOW CUT switch, 3-BAND EQ, AUX sends, PEAK LED, PAN and LEVEL controls. The input channels one through six on the MDR1064 feature high quality, discrete transistor pre-amp providing ...

  • Samson MDR1064 - page 9

    BALANCE (Stereo Inputs Only) The MDR1064’s BALANCE control is used to place or position the stereo signal into the main Left and Right MIX bus. You can move a stereo signal’s image to the left or right by setting the BALANCE control to the left or to the right. PAN (Mono Inputs Only) The MDR1064’s PAN control is used to place or position the ...

  • Samson MDR1064 - page 10

    8 MAIN LEVEL The master MAIN control is the overall volume control for the left and right mix bus. These line level signals are output from the MAIN MIX jacks. PHONES / CR The PHONES / CR control is used to set the level sent to the control room outputs, and also to the headphone jack. 2 TRACK INPUT AND OUTPUT The MDR1064’s 2 Track section provid ...

  • Samson MDR1064 - page 11

    AUX RET 2 The AUX RETURN 2 adjusts the level of the signal present at the AUX 2 RET jacks. This signal is summed, or mixed in to the main L/R MIX bus. TO AUX 1 This routes the signal that is present on the AUX 2 RETURN jacks to AUX 1 so that the effects can be heard in the monitor mix. POWER LED The Power LED lights up to indicate that the main POW ...

  • Samson MDR1064 - page 12

    CHANNEL 1 – 6 MIC and LINE INPUTS The MDR1064’s channel 1 through 6 mono inputs each have a 1/4-inch connector for line level signals and XLR connectors for the MIC signals. Channels 7/8 and 9/10 stereo inputs each have 1/4-inch connectors for line level inputs. By using the GAIN control on channels 1 through 6, you can connect a variety of sig ...

  • Samson MDR1064 - page 13

    MAIN MIX LEFT/RIGHT XLR OUTPUTS In a live sound application, the LEFT/ RIGHT MIX outputs are connected to a power amplifier or powered speak- ers. In a recording application, the LEFT/ RIGHT MIX outputs are used to connect to the inputs of a stereo device such as computer sound card, DAT, or cassette recorder. MAIN MIX LEFT/RIGHT 1/4-INCH OUTPUTS I ...

  • Samson MDR1064 - page 14

    Operating the MDR1064 12 BASIC OPERATION The following section explains the basic operation of the MDR1064. CONNECTING MICROPHONES AND INSTRUMENTS 1. Before connecting mics or instruments, make sure that the power of all your systems components including the MDR1064 is turned off. Also, make sure that the MAIN LEVEL and PHONES / CR controls are tur ...

  • Samson MDR1064 - page 15

    Operating the MDR1064 13 SENDING AN INDEPENDENT MIX TO THE MONITOR SPEAKERS The MDR1064’s AUX1 auxiliary send can be used to feed a separate set of amplifiers and loudspeakers for stage monitors. This lets you build one mono mix for the amplifiers and monitor speakers facing the musicians, and the other stereo mix for the amplifiers and speakers ...

  • Samson MDR1064 - page 16

    14 Operating the MDR1064 USING AN EXTERNAL EFFECT If you prefer to use an external device for effects process- ing, you can easily connect the unit using the MDR1064 AUX 2 bus. Follow the simple steps below to interface your processor: 1. Connect the AUX 2 OUTPUT to the input of the exter- nal effect processor. 2. Connect the outputs of the effect ...

  • Samson MDR1064 - page 17

    15 MDR1064 Sy stem Set-Ups This system shows the MDR1064 connected to a pair of powered speakers like the SAMSON Expedition EX20. The A UX SEND 1 output is connect- ed to an external power amp, which is driving 2 monitor speakers . For inputs, two microphones are connected to channels 1 and 2’ s low-impedance inputs, and the output of the Bass Di ...

  • Samson MDR1064 - page 18

    16 MDR1064 Sy stem Set-Ups This system shows the MDR1064 in a recording set up with the LEFT and RIGHT C ON- TROL ROOM output hooked up to powered studio monitors and the A UX 1 feed headphone mix sent to a Samson S phone headphone amp. F or inputs , tw o microphones are c onnect- ed to channel 1 and 2’ s low- impedance inputs , and the output of ...

  • Samson MDR1064 - page 19

    MDR1064 Wiring Guide Unbalanced 1/4” Connector XLR Balanced Wiring Guide CONNECTING THE MDR1064 The are several ways to interface the MDR1064 to support a variety of applications. The MDR1064 features bal- anced inputs and outputs, so connecting balanced and unbalanced signals is possible. Balanced TRS 1/4” Connector 17 1/4-inch TRS “Y” Ins ...

  • Samson MDR1064 - page 20

    MDR1064 Specifications 18 Mono input channels Microphone input electronically balanced, discrete input con- figuration Frequency response 10Hz to 45kHz Distortion (THD & N) 0.005% at 4dBu, 1kHz Gain range 0dB to +40dB (MIC) SNR (Signal to Noise Ratio) 105dB Line input electronically balanced Frequency response 10Hz to 45kHz Distortion (THD & ...

  • Samson MDR1064 - page 21

    MDR1064 Block Diagram 19 ...

  • Samson MDR1064 - page 22

    Notes 20 ...

  • Samson MDR1064 - page 23

    ...

  • Samson MDR1064 - page 24

    Samson T echnologies Corp. 575 Underhill Blvd. P .O. Box 9031 Syosset, NY 1 1791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888 www .samsontech.com ...

Manufacturer Samson Category Mixer

Documents that we receive from a manufacturer of a Samson MDR1064 can be divided into several groups. They are, among others:
- Samson technical drawings
- MDR1064 manuals
- Samson product data sheets
- information booklets
- or energy labels Samson MDR1064
All of them are important, but the most important information from the point of view of use of the device are in the user manual Samson MDR1064.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Samson MDR1064, service manual, brief instructions and user manuals Samson MDR1064. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Samson MDR1064.

Similar manuals

A complete manual for the device Samson MDR1064, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Samson MDR1064 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Samson MDR1064.

A complete Samson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Samson MDR1064 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Samson MDR1064, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Samson MDR1064, that we can find in the current document
3. Tips how to use the basic functions of the device Samson MDR1064 - which should help us in our first steps of using Samson MDR1064
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Samson MDR1064
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Samson MDR1064 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Samson MDR1064?

Use the form below

If you did not solve your problem by using a manual Samson MDR1064, ask a question using the form below. If a user had a similar problem with Samson MDR1064 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)