-
Christie Digital Systems 38-VIV206-01 - page 1
User's Man ual 38-VIV206-01 MODEL ✽ Projection lens is optional. ...
-
Christie Digital Systems 38-VIV206-01 - page 2
2 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTA ...
-
Christie Digital Systems 38-VIV206-01 - page 3
3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions ...
-
Christie Digital Systems 38-VIV206-01 - page 4
4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cord f or the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has ...
-
Christie Digital Systems 38-VIV206-01 - page 5
5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER MODE 22 VIDEO MODE 30 SETTING 35 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 LENS INSTALLATION 9 POSITIONING PROJECTOR 9 LENS SHIFT ADJUSTMENT 9 ADJUSTABLE FEET 10 MOVING PROJECTOR 10 CONNECTING PR OJECT OR 11 ...
-
Christie Digital Systems 38-VIV206-01 - page 6
6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector accepts various video and computer inpu ...
-
Christie Digital Systems 38-VIV206-01 - page 7
7 PREP ARA TION NAME OF EA CH P ART OF PR OJECT OR BO TT OM OF CABINET B ACK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent. ● Keep rear grills at least 3 ’ (1 m) away from any object, especially heat ...
-
Christie Digital Systems 38-VIV206-01 - page 8
8 PREP ARA TION SETTING-UP PR OJECT OR This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power syste ...
-
Christie Digital Systems 38-VIV206-01 - page 9
9 PREP ARA TION Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to provide projected image where you want. U/D ratio can be adjusted 10 : 0 ~ 1 : 1 (refer to figure below.). Refer to P 20 for operation. Highest (10 : 0) Lo west (1 : 1) POSITIONING PR OJECT OR LENS SHIFT ADJUSTMENT This pro ...
-
Christie Digital Systems 38-VIV206-01 - page 10
10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING A PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctioning may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a pro ...
-
Christie Digital Systems 38-VIV206-01 - page 11
S–VIDEO R–AUDIO–L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK G B R H/V V ( MONO ) 11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR When controlling the computer with the Remote Control Unit of the projector, connect the mouse port of your personal co ...
-
Christie Digital Systems 38-VIV206-01 - page 12
S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK GB R H / V V ( MONO ) ON 1 DIP ON OFF 23456 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ...
-
Christie Digital Systems 38-VIV206-01 - page 13
13 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK G B R H/V V ( MONO ) Video Source (example) Video Cassette Recorder Video Disc Player S-VIDEO Cable ✽ Terminals of the Project ...
-
Christie Digital Systems 38-VIV206-01 - page 14
14 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UT O PC ADJ. IMA GE P-TIMER LOCK INPUT LENS SHIFT OPERA TION OF REMO TE CONTR OL ON ALL OFF ALL-OFF SWITCH Left Side When using Remote Control Unit, turn this switch to “ ON. ” And turn it to “ ALL OFF ” when it is not used. This Remote Control ...
-
Christie Digital Systems 38-VIV206-01 - page 15
15 BEFORE OPERA TION To insure safe operation, please observe following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid. ● Do not expose Remote Control Unit to moisture, or heat. ● Do not drop Remot ...
-
Christie Digital Systems 38-VIV206-01 - page 16
16 BEFORE OPERA TION T OP CONTROL P ANEL AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level. (P27, 32) Lights green when th ...
-
Christie Digital Systems 38-VIV206-01 - page 17
17 HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing the POINT RIGHT / LEFT buttons. Adjust ITEM DATA by pressing the POINT RIGHT / LEFT buttons. Refer to ...
-
Christie Digital Systems 38-VIV206-01 - page 18
18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22, 23) IMAGE ADJUST MENU Used to adjust computer image. [Contrast/Brightness/ White Balance (R/G/B)/Gamma] (Refer to P28) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35-37) SOUND MENU Used to adjust volume or mut ...
-
Christie Digital Systems 38-VIV206-01 - page 19
19 BEFORE OPERA TION TURNING ON PR OJECT OR Connect a projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. Press POWER ON-OFF button on Top control panel or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate. Preparation Display appears on a screen and count ...
-
Christie Digital Systems 38-VIV206-01 - page 20
20 B ASIC OPERA TION ADJUSTING SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. Zoom Focus ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM button on Top control panel or ZOOM ▲ / ▼ button on Remote Control Unit. Message “ Zoom ” is displayed. 2 Press ZOOM ▲ button or the POINT UP button to make image larger, an ...
-
Christie Digital Systems 38-VIV206-01 - page 21
21 B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button except the POINT, SELECT, RIGHT CLICK and LASER buttons. Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, press NO SHOW button again ...
-
Christie Digital Systems 38-VIV206-01 - page 22
22 COMPUTER INPUT Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to INPUT Menu icon. Press the POINT DOWN button and a red-arrow icon will appear. Move arrow to "RGB", and then press SELECT button. 1 3 When connecting a computer output [5 BNC Type (Green, Blue, Red, Horiz. ...
-
Christie Digital Systems 38-VIV206-01 - page 23
23 COMPUTER INPUT This projector automatically detects different types of computer resolutions such as VGA, SVGA, XGA or SXGA (refer to “ COMPATIBLE COMPUTER SPECIFICATIONS ” on page 26). When selecting Computer, this projector automatically detects incoming signal and projects proper image without any special setting. (Some computers need sett ...
-
Christie Digital Systems 38-VIV206-01 - page 24
24 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by the Multi- Scan system of this projector. If this happens, the projector can n ...
-
Christie Digital Systems 38-VIV206-01 - page 25
25 COMPUTER INPUT NOTE : Fine sync., Total dots, Display area (H/V) and Full screen can not be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected on PC SYSTEM Menu (P23). Selects area displayed with this projector. Select the resolution in the Display area dialog box. Display area Adjustment of horizontal area displayed with thi ...
-
Christie Digital Systems 38-VIV206-01 - page 26
26 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS This projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 160 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70 ...
-
Christie Digital Systems 38-VIV206-01 - page 27
27 COMPUTER INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to level that you want to set and then press SELECT button. Move the red fra ...
-
Christie Digital Systems 38-VIV206-01 - page 28
28 COMPUTER INPUT Press the POINT LEFT/RIGHT but- tons to adjust value. Reset all adjustment to previous settings. Reset Store Closes IMAGE MENU. Quit Other icons operate as follows. Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press the POINT DOWN ...
-
Christie Digital Systems 38-VIV206-01 - page 29
29 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen adjustment function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to SCREEN Menu icon. When Digital zoom + is selected, ON-SCREEN MENU disappea ...
-
Christie Digital Systems 38-VIV206-01 - page 30
30 VIDEO INPUT When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Y,Pb/Cb,Pr/Cr SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to INPUT Menu icon. 1 Move the pointer to source and press SELECT button. Source Select Menu (VIDE ...
-
Christie Digital Systems 38-VIV206-01 - page 31
31 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to AV SYSTEM Menu icon. Press the POINT DOWN button to move the red arrow pointer to system that you want to select and then press ...
-
Christie Digital Systems 38-VIV206-01 - page 32
32 VIDEO INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to level that you want to set and then press SELECT button. Move the red frame ...
-
Christie Digital Systems 38-VIV206-01 - page 33
33 VIDEO INPUT Press the POINT LEFT/RIGHT but- tons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the item you want to adjust and then press SELECT button. The level of e ...
-
Christie Digital Systems 38-VIV206-01 - page 34
34 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen adjustment function, which enables you to display the desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to SCREEN Menu icon. Press the POINT DOWN button and move the red frame pointer ...
-
Christie Digital Systems 38-VIV206-01 - page 35
35 SETTING Ceiling When this function is “ On, ” picture is top / bottom and left / right reversed. This function is used to project image from a ceiling mounted projector. Rear When this function is “ On, ” picture is left / right reversed. This function is used to project image to a rear projection screen. Ceiling function Rear function K ...
-
Christie Digital Systems 38-VIV206-01 - page 36
36 SETTING Remote control This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together. When operating projector in “ Code 2, ” both projector and Remote Co ...
-
Christie Digital Systems 38-VIV206-01 - page 37
37 SETTING/APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control Unit is not only able to operate this projector but also be used as a wireless mouse for most Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation. This Wireless Mouse function is available only when PC mouse pointer is ...
-
Christie Digital Systems 38-VIV206-01 - page 38
38 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace the Lens Cover. 1 3 Lightly wipe a cleaning cloth over Projection Lens. 2 Fo ...
-
Christie Digital Systems 38-VIV206-01 - page 39
39 APPENDIX LAMP REPLA CEMENT When the life of the Projection Lamp of this projector draws to an end, LAMP REPLACEMENT indicator lights yellow. When a projected image becomes dark or the color of an image becomes unnatural, replacement of Projection Lamp is required. ORDER REPLA CEMENT LAMP Replacement Lamp can be ordered through your dealer. When ...
-
Christie Digital Systems 38-VIV206-01 - page 40
40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected the projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 11 ~ 13. 2. Check cable connection. Verify that all computer, video and power c ...
-
Christie Digital Systems 38-VIV206-01 - page 41
41 APPENDIX Remote Control Unit does not work. ● Check batteries. ● Check ALL-OFF switch on Remote Control Unit is set to “ ON. ” . ● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. ● Make sure you are not too far from the projector when using Remote Control Unit. Maximum operating range is 16.4 ’ (5m). ...
-
Christie Digital Systems 38-VIV206-01 - page 42
Multi-media Projector 42 APPENDIX Accessories ● Specifications are subject to change without notice. TECHNICAL SPECIFICA TIONS 1.3" TFT Active Matrix type, 3 panels 15.7 lbs (7.1 kg) 12.6" x 6.6" x 16.8" (319 mm x 168 mm x 429.5 mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N U ...
-
Christie Digital Systems 38-VIV206-01 - page 43
43 APPENDIX CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINAL (ANALOG) Terminal : HDB15-PIN Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (supplied) is required. 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green ...
-
Christie Digital Systems 38-VIV206-01 - page 44
Printed in Japan Part No. 10-A 610 302 1201 (1AA6P1P3600-- MA8KM) ...
Do you have a question concerning Christie Digital Systems 38-VIV206-01?
Use the form below
If you did not solve your problem by using a manual Christie Digital Systems 38-VIV206-01, ask a question using the form below. If a user had a similar problem with Christie Digital Systems 38-VIV206-01 it is likely that he will want to share the way to solve it.