English dropdown-ico

Manual Miller Electric Big Blue 602P

82 pages 4.29 mb
Download

Go to site of 82

Summary
  • Miller Electric Big Blue 602P - page 1

    Big Blue 402P , 502P , 602P  OM -491 190 355AP October 2003 Visit our website at www.Miller Welds .com Processes Descrip tio n Air Carbon Arc (CAC-A) Cutting and Gouging Stick (SMAW ) W elding Engine Driven Welding Generator TIG (GT A W ) W elding MIG (GMAW ) W elding Flux Cored (FCA W ) W elding ...

  • Miller Electric Big Blue 602P - page 2

    Miller Electric manufactures a full line of welders and welding related equipment. For information on other quality Miller products, contact your local Miller distributor to receive the latest full line catalog or individual catalog sheets. T o locate your nearest distributor or service agency call 1-800-4-A-Miller , or visit us at www .MillerW eld ...

  • Miller Electric Big Blue 602P - page 3

    T ABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1. Symbol Usage 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2. Arc W elding Hazards 1 . . . . . . . ...

  • Miller Electric Big Blue 602P - page 4

    T ABLE OF CONTENTS SECTION 8 − OPERA TING AUXILIARY EQUIPMENT 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1. 120 V olt And 240 V olt Receptacles 31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2. Connecting T o Optional Three-Phas ...

  • Miller Electric Big Blue 602P - page 5

    OM-491 Page 1 Return T o T able Of Contents SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING rom _nd_8/03  W arning: Protect yourself and others from injury — read and follow these precautions. 1-1. Symbol Usage Means W arning! W atch Out! There are possible hazards with this procedure! The possible hazards are shown in the adjoining sym ...

  • Miller Electric Big Blue 602P - page 6

    OM-491 Page 2 Return T o T able Of Contents W elding on closed containers, such as tanks, drums, or pipes, can cause them to blow up. Sparks can fly off from the welding arc. The flying sparks, hot workpiece, and hot equipment can cause fires and burns. Accidental contact of electrode to metal objects can cause sparks, explosion, overheating, or fi ...

  • Miller Electric Big Blue 602P - page 7

    OM-491 Page 3 Return T o T able Of Contents STEAM AN D H O T C OOLANT can burn.  If possible, check coolant level when engine is cold to avoid scalding.  Always check coolant level at overflow tank, if pres- ent on unit, instead of radiator (unless told otherwise in maintenance section or engine manual).  If the engine is warm, checking is ...

  • Miller Electric Big Blue 602P - page 8

    OM-491 Page 4 Return T o T able Of Contents READ INSTRUCTIONS.  Use only genuine MILLER/Hobart replacement parts.  Perform engine and air compressor (if applicable) maintenance and service according to this manual and the engine/air compressor (if applicable) manu- als. H. F . RADIA TION can cause interference.  High-frequency (H.F .) can ...

  • Miller Electric Big Blue 602P - page 9

    OM-491 Page 5 Revenez à la table des matières SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE A V ANT UTILISA TION rom_fre 8/03  A vertissement: Protégez vous et les autres des blessures − lisez et suivez ces précautions. 2-1. Signification des symboles Signifie Mise en garde ! Soyez vigilant ! Cette procédure présente des risques de dang ...

  • Miller Electric Big Blue 602P - page 10

    OM-491 Page 6 Revenez à la table des matières LES ACCUMULA TIONS DE GAZ ris- quent de provoquer des blessures ou même la mort.  Fermer l’alimentation du gaz protecteur en cas de non utilisation.  V eiller toujours à bien aérer les espaces confinés ou se servir d’un respi- rateur d’adduction d’air homologué. Le rayonnement de l? ...

  • Miller Electric Big Blue 602P - page 11

    OM-491 Page 7 Revenez à la table des matières L ’EXPLOSION DE LA BA TTERIE peut RENDRE A VEUGLE.  T oujours porter une protection faciale, des gants en caoutchouc et vêtements de protection lors d’une in- tervention sur la batterie.  Arrêter le moteur avant de débrancher ou de brancher les câbles de batterie.  Eviter de provoquer ...

  • Miller Electric Big Blue 602P - page 12

    OM-491 Page 8 Revenez à la table des matières LE SURCHAUFFEMENT peut endom- mager le moteur électrique.  Arrêter ou déconnecter l’équipement avant de dé- marrer ou d’arrêter le moteur .  Ne pas laisser tourner le moteur trop lentement sous risque d’endommager le moteur électrique à cause d’une tension et d’une fréquence t ...

  • Miller Electric Big Blue 602P - page 13

    OM-491 Page 9 Return T o T able Of Contents SECTION 3 − DEFINITIONS 3-1. Symbols And Definitions Stop Engine Fast (Run, Weld/ Power) Slow (Idle) Start Engine Starting Aid Battery (Engine) Engine Oil Pressure Engine Oil Check Injectors/ Pump Check V alve Clearance Fuel Protective Earth (Ground) Positive Negative Certified/T rained Mechanic W eldin ...

  • Miller Electric Big Blue 602P - page 14

    OM-491 Page 10 Return T o T able Of Contents 4-1. W eld, Power , And Engine Specifications W elding Mode W eld Output Range Rated W elding Output Maximum Open- Circuit V oltage Generator Power Rating Engine Fuel Capacity CC/DC 55 − 600 A (CC Models) 20 − 600 A (CC/CV Models) 400 A, 40 V olts DC, 100% Duty Cycle 500 A, 40 volts DC, 60% Duty Cycl ...

  • Miller Electric Big Blue 602P - page 15

    OM-491 Page 1 1 Return T o T able Of Contents 4-3. V olt-Ampere Curves For CC Models 203 412 The volt-ampere curve shows the minimum and maximum voltage an d amperage output capabilities of th e welding generator . Curves of al l other settings fall between the curves shown. 0 20 40 60 80 100 0 100 200 300 400 500 600 700 800 900 DC AMPERES DC VOL ...

  • Miller Electric Big Blue 602P - page 16

    OM-491 Page 12 Return T o T able Of Contents 4-4. V olt-Ampere Curves For CC/CV Models 203 414 / 203 415 / 203 413 The volt-ampere curves show the minimum and maximum voltage an d amperage output capabilities of th e welding generator . Curves of al l other settings fall between the curves shown. A. Stick Mode B. MIG Mode C. TIG Mode 0 20 40 60 80 ...

  • Miller Electric Big Blue 602P - page 17

    OM-491 Page 13 Return T o T able Of Contents 4-5. Fuel Consumption The curve shows typical fuel use under weld or power loads. 193 093 0 50 100 150 200 250 300 350 400 450 500 DC WELD AMPERES A T 100% DUTY CYCLE 1800 RPM 0 IDLE Continuous W elding 4-6. Duty Cycle And Overheating Duty Cycle is percentage of 10 min - utes that unit can weld at rated ...

  • Miller Electric Big Blue 602P - page 18

    OM-491 Page 14 Return T o T able Of Contents 4-7. AC Generator Power Curve 193 018 Th e ac power curve shows the gen- erator power in amperes available at the 120 and 240 volt receptacles. 0 50 100 150 200 250 300 0 5 10 15 20 25 30 AC AMPERES IN 240V MODE AC VOL TS 0 25 50 75 100 150 125 0 1 0 2 03 0 4 05 0 6 0 AC AMPERES IN 120V MODE 4-8. Optiona ...

  • Miller Electric Big Blue 602P - page 19

    OM-491 Page 15 Return T o T able Of Contents SECTION 5 − INST ALLA TION install3 6/03 − Ref. 800 652 / Ref. 800 477-A / 803 274  Always securely fasten weld- ing generator onto transport vehicle or trailer and comply with all DOT and other applica- ble codes.  Always ground generator frame to vehicle frame to pre- vent electric shock and ...

  • Miller Electric Big Blue 602P - page 20

    OM-491 Page 16 Return T o T able Of Contents 5-2. Mounting Welding Generator T ools Nee d e d : 9/16 in 2 2 3 4 W elding Unit In Place Bolting Unit In Place  Do not weld on base. W eld- ing on base can cause fuel tank fire or explosion. Weld only on the four mounting brackets or bolt unit down.  Do not mount unit by sup- porting the base only ...

  • Miller Electric Big Blue 602P - page 21

    OM-491 Page 17 Return T o T able Of Contents 5-3. Using Lifting Eye Ref. 802 169-F 1 Lifting Eye 2 Nut 3 Carriage Bolt Raise lifting eye until it snaps in place. Lower lifting eye when not needed. T o lock the lifting eye in the upright position, insert a 3/8-16 x 1-1/2 in carriage bolt through slot in bracket a n d secure with nut (bolt and nut no ...

  • Miller Electric Big Blue 602P - page 22

    OM-491 Page 18 Return T o T able Of Contents 5-5. Activating The Dry Charge Battery (If Applicable) Remove b attery from unit. 1 Eye Protection − Safety Glasses Or Face Shield 2 Rubber Gloves 3 V ent Caps 4 Sulfuric Acid Electrolyte (1.265 Specific Gravity) 5 W ell Fill each cell with electrolyte to bottom of well (maximum).  Do not overfill b ...

  • Miller Electric Big Blue 602P - page 23

    OM-491 Page 19 Return T o T able Of Contents 5-6. Connecting The Battery 1/2 i n − +  Connect Negative (−) Cable Last. T ools Needed: 802 168-E / Ref. 202 705 / 802 313 / S-0756-C  Reinstall cover after connecting batter y. Notes ...

  • Miller Electric Big Blue 602P - page 24

    OM-491 Page 20 Return T o T able Of Contents Ref. 802 168-E 5-7. Engine Prestart Checks  Check all engine fluids daily . Engine must be cold and on a level surface. Unit is shipped with 20W break-in oil. The Automatic shutdown system stops en- gine if fuel level or oil pressure is too low , or coolant temperature is too high.  This unit has a ...

  • Miller Electric Big Blue 602P - page 25

    OM-491 Page 21 Return T o T able Of Contents 5-8. Connecting T o Weld Output T erminals Ref. 802 169-E  Stop engine. 1 Positive (+) Weld Output T erminal 2 Negative (−) Weld Output T erminal For Stick and TIG welding Direct Cur- rent Electrode Positive (DCEP), con- nect electrode holder cable to Positive (+) terminal on left and work cable to ...

  • Miller Electric Big Blue 602P - page 26

    OM-491 Page 22 Return T o T able Of Contents 5-10. Connecting T o Remote Amperage Adjust Receptacle RC13 On CC Models Ref. 154 862-A / 048 720-K / 802 160-E 1 Remote Amperage Adjust Receptacle RC13 Connect optional remote control to RC13 (see Section 6-3). 1 5-1 1. Connecting T o Remote 14 Receptacle RC14 On CC/CV Models Socket* Socket Information ...

  • Miller Electric Big Blue 602P - page 27

    OM-491 Page 23 Return T o T able Of Contents SECTION 6 − OPERA TING WELDING GENERA T OR − CC MODELS 6-1. Front Panel Controls For CC Models (See Section 6-2 ) 17 202 705 / 802 169-F 15 16 2 1 3 13 18 19 14 12 10 1 1 9 8 6 5 47 ...

  • Miller Electric Big Blue 602P - page 28

    OM-491 Page 24 Return T o T able Of Contents 6-2. Description Of Front Panel Controls For CC Models (See Section 6-1 ) Engine Starting Controls 1 Magnetic Shutdown Switch Use switch during start-up to bypass engine shutdown system. System stops engine if oil pressure o r fuel level is too low or coolant tem- perature is too high. 2 Starting Aid Swi ...

  • Miller Electric Big Blue 602P - page 29

    OM-491 Page 25 Return T o T able Of Contents 6-3. Remote Amperage Control On CC Models (Optional) 1 Remote Amperage Adjust Receptacle RC13 Connect optional remote control to RC13 (see Section 5-10 ). Example: Combination Remote Amperage Control (Stick) In Example: Range = 125 to 320 A DC Percentage Of Range = 50% Max = About 223 A DC (50% of 125 to ...

  • Miller Electric Big Blue 602P - page 30

    OM-491 Page 26 Return T o T able Of Contents Notes ...

  • Miller Electric Big Blue 602P - page 31

    OM-491 Page 27 Return T o T able Of Contents SECTION 7 − OPERA TING WELDING GENERA TOR − CC/CV MODELS 7-1. Front Panel Controls For CC/CV Models (See Section 7-2 ) 202 706 / 802 31 1-D 6 5 47 13 16 2 1 3 14 18 19 15 12 10 1 1 9 8 17 ...

  • Miller Electric Big Blue 602P - page 32

    OM-491 Page 28 Return T o T able Of Contents 7-2. Description Of Front Panel Controls For CC/CV Models (See Section 7-1 ) Engine Starting Controls 1 Magnetic Shutdown Switch Use switch during start-up to bypass engine shutdown system. System stops engine if oil pressure is too low or engine temperature is too high. 2 Starting Aid Switch Use switch ...

  • Miller Electric Big Blue 602P - page 33

    OM-491 Page 29 Return T o T able Of Contents 7-3. Process/Contactor Switch On CC/CV Models 1 Process/Contactor Switch  W eld output terminals are ener- gized when Process/Contactor switch is in an Electrode Hot position and the engine is run- ning.  DC voltage is still present at the weld terminals when Process/ Contactor switch is in the Rem ...

  • Miller Electric Big Blue 602P - page 34

    OM-491 Page 30 Return T o T able Of Contents 7-4. Remote V oltage/Amperage Control On CC/CV Models (Optional) 1 Remote 14 Receptacle RC14 Connect optional remote control to RC14 (see Section 5-1 1). 0774 / Ref. 202 706 / 802 169-E Example: Combination Remote Amperage Control (Stick) In Example: Process = Stick (Using Remote On/Off) Range = 125 to 3 ...

  • Miller Electric Big Blue 602P - page 35

    OM-491 Page 31 Return T o T able Of Contents SECTION 8 − OPERA TING AUXILIAR Y EQUIPMENT 8-1. 120 V olt And 240 V olt Receptacles 191 624-A 2 1 3 4 1 120 V 20 A AC GFCI Receptacle GFCI1 2 240 V 30 A AC T wistlock Receptacle RC1 Receptacles supply 60 Hz single- phase power at weld/power speed. If a ground fault is detected, GFCI Reset button pops ...

  • Miller Electric Big Blue 602P - page 36

    OM-491 Page 32 Return T o T able Of Contents 8-2. Connecting T o Optional Three-Phase Generator (CC/CV Models Only) Ref. 197 399 / 802 332-E  Place Process/Contactor switch in Electrode Hot - Stick position when using three−phase genera- tor (see Section 7-3). Single-Phase Generator Power 1 120/240 V 50 A Receptacle RC5 RC5 is connected to the ...

  • Miller Electric Big Blue 602P - page 37

    OM-491 Page 33 Return T o T able Of Contents 8-3. Optional Generator Power Receptacles 2 1 120 V 20 A AC GFCI Receptacle GFCI1 2 240 V 16 A AC European Receptacle RC1 3 240 V 15 A AC Australian Receptacle RC1 4 240 V 15 A AC South African Receptacle RC1 Receptacles supply 60 Hz single- phase power at weld/power speed. If a ground fault is detected, ...

  • Miller Electric Big Blue 602P - page 38

    OM-491 Page 34 Return T o T able Of Contents SECTION 9 − MAINTENANCE & TROUBLESHOOTING 9-1. Routine Maintenance Follow the storage procedure in the engine owner ’s manual if the unit will not be used for an extended period. Note Recycle engine fluids.  Stop engine before maintaining.  See Engine Manual and Maintenance Label for import ...

  • Miller Electric Big Blue 602P - page 39

    OM-491 Page 35 Return T o T able Of Contents Every 400 h Change Oil. See Section 9-6. Change Oil Filter . S e e Section 9-6. Check Radiator Fluid Level. See Section 5-7. Change Fuel Filters. See Section 9-6. Check V alve Clearance.* Every 500 h Repair Or Replace Damaged Cables. Every 800 h Clean/Set Injectors.* Every 1000 h Blow Out Or V acuum Insi ...

  • Miller Electric Big Blue 602P - page 40

    OM-491 Page 36 Return T o T able Of Contents 9-2. Maintenance Label ...

  • Miller Electric Big Blue 602P - page 41

    OM-491 Page 37 Return T o T able Of Contents 9-3. Servicing Air Cleaner aircleaner1 9/00 − ST -153 929-B / ST-153 585 / Ref. S-0698-B / Ref. 202 705  Stop engine.  Do not run engine without air cleaner or with dirty element. En- gine damage caused by using a damaged element is not covered by the warranty .  The air cleaner primary elemen ...

  • Miller Electric Big Blue 602P - page 42

    OM-491 Page 38 Return T o T able Of Contents 9-4. Inspecting And Cleaning Optional Spark Arrestor Muffler 802 160-E / Ref. 202 705  Stop engine and let cool. 1 Spark Arrestor Muffler 2 Cleanout Plug Remove plug and remove any dirt covering cleanout hole. 3 Exhaust Pipe Start engine and run at idle speed to blow out cleanout hole. If nothing blow ...

  • Miller Electric Big Blue 602P - page 43

    OM-491 Page 39 Return T o T able Of Contents 9-5. Adjusting Engine Speed 802 168-C / 802 229-A / Ref. 202 705  Stop engine and let cool. Engine speed is factory set and should not require adjustment. Af- ter tuning engine, check engine speed with tachometer or frequen- cy meter . See table for proper no load speed. If necessary , adjust speed as ...

  • Miller Electric Big Blue 602P - page 44

    OM-491 Page 40 Return T o T able Of Contents 9-6. Servicing Fuel And Lubrication Systems 802 170-D / Ref. 802 168-B / Ref. 801 434  Stop engine and let cool.  After servicing, start engine and check for fuel leaks. Stop engine, tighten connec- tions as necessary , and wipe up spilled fuel. 1 Oil Filter 2 Oil Drain V alve And Hose 3 Oil Fill C ...

  • Miller Electric Big Blue 602P - page 45

    OM-491 Page 41 Return T o T able Of Contents 9-7. Overload Protection 802 170-E 21 9 8 7 4  Stop engine.  When a circuit breaker or fuse opens, it usually indicates a more serious problem exists. Contact Factory Authorized Service Agent. 1 Fuse F1 2 Fuse F2 F1 and F2 protect the stator exciter winding from overload. If F1 opens, weld and gene ...

  • Miller Electric Big Blue 602P - page 46

    OM-491 Page 42 Return T o T able Of Contents 9-8. Diagnosing Causes Of Engine Fault Shutdowns Ref. 202 705 Use the front panel engine lights to help determine the cause of an au- tomatic engine shutdown.  Correct the cause of the shut- down before operating the welding generator .  This unit does not have a bat- tery charging fault shutdown. ...

  • Miller Electric Big Blue 602P - page 47

    OM-491 Page 43 Return T o T able Of Contents 9-9. T roubleshooting A. Welding − CC Models T rouble Remedy No weld output; generator power output okay at ac receptacles. Check position of Ampere Range switch. Check position of optional polarity switch. Place Amperage Adjust switch in Panel position, or place switch in Remote position and connect r ...

  • Miller Electric Big Blue 602P - page 48

    OM-491 Page 44 Return T o T able Of Contents B. Welding − CC/CV Models T rouble Remedy No weld output; generator power output okay at ac receptacles. Place Process/Contactor switch in a Electrode Hot position, or place switch in a Remote p osition and connect remote contactor to optional Remote 14 receptacle RC14 (see Sections 5-1 1 and 7-1). Che ...

  • Miller Electric Big Blue 602P - page 49

    OM-491 Page 45 Return T o T able Of Contents T rouble Remedy Min or max CV weld output only . Check position of V oltage/Amperage Adjust control and V oltage/Amperage Adjust switch. Repair or replace remote control device. Have Factory Authorized Service Agent check field current regulator board PC1. C. Standard Generator Power T rouble Remedy No g ...

  • Miller Electric Big Blue 602P - page 50

    OM-491 Page 46 Return T o T able Of Contents T rouble Remedy Engine cranks but does not start. Press Magnetic Shutdown switch MS1 when starting engine. Check fuel level. Reset circuit breaker CB13 (see Section 9-7). Have Factory Authorized Service Agent check engine wir- ing harness and components. Check battery and replace if necessary . Check eng ...

  • Miller Electric Big Blue 602P - page 51

    OM-491 Page 47 Return T o T able Of Contents Notes ...

  • Miller Electric Big Blue 602P - page 52

    OM-491 Page 48 Return T o T able Of Contents SECTION 10 − ELECTRICAL DIAGRAMS Figure 10-1. Circuit Diagram For CC Welding Generator ...

  • Miller Electric Big Blue 602P - page 53

    OM-491 Page 49 Return T o T able Of Contents 215 304-A ...

  • Miller Electric Big Blue 602P - page 54

    OM-491 Page 50 Return T o T able Of Contents Figure 10-2. Circuit Diagram For CC/CV Welding Generator ...

  • Miller Electric Big Blue 602P - page 55

    OM-491 Page 51 Return T o T able Of Contents 215 305-A ...

  • Miller Electric Big Blue 602P - page 56

    OM-491 Page 52 Return T o T able Of Contents SECTION 1 1 − RUN-IN PROCEDURE run_in1 8/0 1 1 1-1. Wetstacking  Do not perform run-in procedure at less than 20 volts weld output and do not exceed duty cycle or equip- ment damage may occur . 1 Welding Generator Ru n diesel engines near rated volt- ag e and current during run-in period to properly ...

  • Miller Electric Big Blue 602P - page 57

    OM-491 Page 53 Return T o T able Of Contents 1 1-2. Run-In Procedure Using Load Bank S-0683  Stop engine.  Do not touch hot exhaust pipe, engine parts, or load bank/grid.  Keep exhaust and pipe away from flammables.  Do not perform run-in procedure at less than 20 volts weld output and do not exceed duty cycle or equip- ment damage may ...

  • Miller Electric Big Blue 602P - page 58

    OM-491 Page 54 Return T o T able Of Contents 1 1-3. Run-In Procedure Using Resistance Grid S-0684  Stop engine.  Do not touch hot exhaust pipe, engine parts, or load bank/grid.  Keep exhaust and pipe away from flammables.  Do not perform run-in procedure at less than 20 volts weld output and do not exceed duty cycle or equip- ment damag ...

  • Miller Electric Big Blue 602P - page 59

    OM-491 Page 55 Return T o T able Of Contents SECTION 12 − GENERA TOR POWER GUIDELINES The views in this section are intended to be representative of all engine-driven welding generators. Your unit may differ from those shown. NOTE 12-1. Selecting Equipment gen_pwr 1 1/02 − Ref. ST-159 730 / ST -800 577 1 Generator Power Receptacle s − Neutral ...

  • Miller Electric Big Blue 602P - page 60

    OM-491 Page 56 Return T o T able Of Contents 12-3. Grounding When Supplying Building Systems ST-800 576-B 1 Equipment Grounding T erminal 2 Grounding Cable Use #10 A WG or larger insulated copper wire. 3 Ground Device  Ground generator to system earth ground if supplying power to a premises (home, shop, farm) wiring system. GND/PE 1 2 Us e groun ...

  • Miller Electric Big Blue 602P - page 61

    OM-491 Page 57 Return T o T able Of Contents 12-5. Approximate Power Requirements For Industrial Motors Industrial Motors Rating Starting W atts Running W atts Split Phase 1/8 HP 800 300 1/6 HP 1225 500 1/4 HP 1600 600 1/3 HP 2100 700 1/2 HP 3175 875 Capacitor Start-Induction Run 1/3 HP 2020 720 1/2 HP 3075 975 3/4 HP 4500 1400 1 HP 6100 1600 1-1/2 ...

  • Miller Electric Big Blue 602P - page 62

    OM-491 Page 58 Return T o T able Of Contents 12-7. Approximate Power Requirements For Contractor Equipment Contractor Rating Starting W atts Running W atts Hand Drill 1/4 in 350 350 3/8 in 400 400 1/2 in 600 600 Circular Saw 6-1/2 in 500 500 7-1/4 in 900 900 8-1/4 in 1400 1400 T able Saw 9 in 4500 1500 10 in 6300 1800 Band Saw 14 in 2500 1 100 Benc ...

  • Miller Electric Big Blue 602P - page 63

    OM-491 Page 59 Return T o T able Of Contents 12-8. Power Required T o Start Motor S-0624 1 Motor Start Code 2 Running Amperage 3 Motor HP 4 Motor V oltage T o find starting amperage: Step 1: Find code and use table to find kV A/HP . If code is not listed, multiply running amperage by six to find starting amperage. Step 2 : Find Motor HP and V olts. ...

  • Miller Electric Big Blue 602P - page 64

    OM-491 Page 60 Return T o T able Of Contents 12-10. T ypical Connections T o Supply Standby Power  Have only qualified persons perform these connections according to all applicable codes and safety practic- es.  Properly install and ground this equipment according to its Owner ’ s Manual and national, state, and local codes.  Customer -s ...

  • Miller Electric Big Blue 602P - page 65

    OM-491 Page 61 Return T o T able Of Contents 12-1 1. Selecting Extension Cord (Use Shortest Cord Possible) Cord Lengths for 120 V olt Loads  If unit does not have GFCI receptacles, use GFCI-protected extension cord. Maximum Allowable Cord Length in ft (m) for Conductor Size (A WG)* Current (Amperes) Load (W atts) 4 6 8 10 12 14 5 600 350 (106) 2 ...

  • Miller Electric Big Blue 602P - page 66

    OM-491 Page 62 Return T o T able Of Contents SECTION 13 − P ARTS LIST  Hardware is common and not available unless listed. 3 2 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 29 31 32 33 34 93 94 95 96 97 98 99 100 102 101 (CC ONL Y) 104 FIG 13-2 OR 13-3) 105 21 106 107 108 (FIG 13-4 OR 13-5) 109 11 0 111 1 12 (FIG 13 ...

  • Miller Electric Big Blue 602P - page 67

    OM-491 Page 63 Return T o T able Of Contents 802 265-G 11 4 44 11 5 Big Blue 502, 602 Only 35 36 37 38 39 40 41 42 43 44 45 46 (FIG 13-6) 47 48 49 50 51 52 53 54 55 54 54 56 57 58 59 60 61 62 63 64 65 66 67 39 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 ...

  • Miller Electric Big Blue 602P - page 68

    OM-491 Page 64 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-1. Main Assembly Quanti ty 1 189 824 P ANEL, gen LH 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ♦ 199 294 P ANEL, gen LH ss 1 . . . . . . . . . . . . . . . . ...

  • Miller Electric Big Blue 602P - page 69

    OM-491 Page 65 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-1. Main Assembly (Continued) Quanti ty 44 010 875 CLAMP , muf fler 2.000 dia 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 193 314 MANIFOLD, exhaust muf fler (Big Blue 402 only) 1 ...

  • Miller Electric Big Blue 602P - page 70

    OM-491 Page 66 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-1. Main Assembly (Continued) Quanti ty 79 191 610 FITTING, hose stl elbow .500tbg x 3/4-16 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 190 180 W ASHER, flat .750 ID x 1.250 OD x .125T stl 1 . . . . . . . . ...

  • Miller Electric Big Blue 602P - page 71

    OM-491 Page 67 Return T o T able Of Contents 802 551-E 2 1 11 8 6 3 7 14 20 13 16 12 5 22 15 10 9 18 17 4 21 19 Figure 13-2. Control Box Assembly − CC Models Description Part No. Dia. Mkgs. Item No. Figure 13-2. Control Box Assembly − CC Models (Figure 13-1 Item 104) Quanti ty 1 F1, F2 *085 874 FUSE, mintr cer slo-blo 10A 250V 2 . . . . . . . . ...

  • Miller Electric Big Blue 602P - page 72

    OM-491 Page 68 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-2. Control Box Assembly − CC Models (Continued) Quanti ty 190 260 HARNESS, unit weld control (consisting of) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLG3 158465 CONN, rect univ 084 12p/s 3row plug c ...

  • Miller Electric Big Blue 602P - page 73

    OM-491 Page 69 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-3. Control Box Assembly − CC/CV Models (Figure 13-1 Item 104) Quanti ty 1 F1, F2 *085 874 FUSE, mintr cer slo-blo 10A 250V 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 046 432 HOLDER, fuse mintr .250 x 1.250 ...

  • Miller Electric Big Blue 602P - page 74

    OM-491 Page 70 Return T o T able Of Contents  Hardware is common and not available unless listed. 802 266-D 1 3 4 5 12 15 18 23 24 26 29 32 35 36 37 38 44 45 46 17 25 30 31 16 20 2 22 27 28 13 19 14 6 7 8 9 10 21 34 33 11 39 40 41 42 43 Figure 13-4. Panel, Front w/Components − CC Models Description Part No. Dia. Mkgs. Item No. Figure 13-4. Pan ...

  • Miller Electric Big Blue 602P - page 75

    OM-491 Page 71 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-4. Panel, Front w/Components − CC Models (Continued) Quanti ty 8 S5 01 1 609 SWITCH, tgl SPDT 15A 125V AC on-none-on spd term chr (included in . . . . . . . . . . . . . . . control box harness, see 13-2) 1 . . . . . . . . . . . . . . . . . . . . . . . ...

  • Miller Electric Big Blue 602P - page 76

    OM-491 Page 72 Return T o T able Of Contents  Hardware is common and not available unless listed. 802 332-F 1 2 3 4 5 6 7 9 48 50 51 52 53 59 60 61 62 13 18 19 20 21 22 23 24 25 26 27 30 28 29 15 16 34 33 32 17 35 42 43 41 40 39 38 37 36 44 47 14 10 49 11 8 31 45 46 12 54 55 56 57 58 63 Figure 13-5. Panel, Front w/Components − CC/CV Models Des ...

  • Miller Electric Big Blue 602P - page 77

    OM-491 Page 73 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-5. Panel, Front w/Components − CC/CV Models (Continued) Quanti ty 5 R1 193 1 18 POT , cp flat 1t 2w 1k ohm linear 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 S6 193 234 SWITCH, rotary 6 positi ...

  • Miller Electric Big Blue 602P - page 78

    OM-491 Page 74 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-5. Panel, Front w/Components − CC/CV Models (Continued) Quanti ty 52 FUEL 191 242 GAUGE, fuel elec switch 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 HM 1 18 058 METER, hour 12-24VDC 2. ...

  • Miller Electric Big Blue 602P - page 79

    OM-491 Page 75 Return T o T able Of Contents Description Part No. Dia. Mkgs. Item No. Figure 13-6 . Generator (Figure 13-1 Item 46) Quanti ty 1 132 053 SCREW, 375-16 x 1.50hexhd pln gr 5pld 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 183 387 W ASHER, conical spring .406 ID x .875 OD pltd 6 . . . . . ...

  • Miller Electric Big Blue 602P - page 80

    OM-491 Page 76 Return T o T able Of Contents  Hardware is common and not available unless listed. 802 279-A 1 2 3 4 6 5 7 8 9 Figure 13-7. Main Rectifier Assembly Description Part No. Dia. Mkgs. Item No. Figure 13-7. Main Rectifier Assembly (Figure 13-1 Item 1 1 1) Quanti ty SR3 201 747 RECTIFIER (consisting of) 1 . . . . . . . . . . . . . . . . ...

  • Miller Electric Big Blue 602P - page 81

    Warranty Questions? Call 1-800-4-A-MILLER for your local Miller distributor. miller_warr 8/03 Y our distributor also gives you ... Service Y ou always get the fast, reliable response you need. Most replacement parts can be in your hands in 24 hours. Support Need fast answers to the tough welding questions? Contact your distributor . The expertise o ...

  • Miller Electric Big Blue 602P - page 82

    PRINTED IN USA  2003 Miller Electric Mfg. Co. 1/03 Miller Elect ric Mfg. Co. An I l li noi s T ool Works Com pany 1635 West Spencer Street Applet on, WI 54914 US A International He adquarters− USA USA Phone: 920-735-4505 Aut o-A t t ended USA & C anada FAX: 920-735-4134 Int ernati onal F A X: 9 20-735-4125 European He adqua rt ers − Unit ...

Manufacturer Miller Electric Category Welding System

Documents that we receive from a manufacturer of a Miller Electric Big Blue 602P can be divided into several groups. They are, among others:
- Miller Electric technical drawings
- Big Blue 602P manuals
- Miller Electric product data sheets
- information booklets
- or energy labels Miller Electric Big Blue 602P
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miller Electric Big Blue 602P.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miller Electric Big Blue 602P, service manual, brief instructions and user manuals Miller Electric Big Blue 602P. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miller Electric Big Blue 602P.

Similar manuals

A complete manual for the device Miller Electric Big Blue 602P, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miller Electric Big Blue 602P by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miller Electric Big Blue 602P.

A complete Miller Electric manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miller Electric Big Blue 602P - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miller Electric Big Blue 602P, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miller Electric Big Blue 602P, that we can find in the current document
3. Tips how to use the basic functions of the device Miller Electric Big Blue 602P - which should help us in our first steps of using Miller Electric Big Blue 602P
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miller Electric Big Blue 602P
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miller Electric Big Blue 602P in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miller Electric Big Blue 602P?

Use the form below

If you did not solve your problem by using a manual Miller Electric Big Blue 602P, ask a question using the form below. If a user had a similar problem with Miller Electric Big Blue 602P it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)