English dropdown-ico

Manual Kenwood KDC-W534Y

36 pages 0.77 mb
Download

Go to site of 36

Summary
  • Kenwood KDC-W534Y - page 1

    © B64-3266-00/00 (EW/EN/E2W/E2N) CD-RECEIVER KDC-W534 KDC-W534Y INSTR UCTION MANU AL B64-3266-00_English.Indd 1 B64-3266-00_English.Indd 1 05.10.21 9:51:22 AM 05.10.21 9:51:22 AM ...

  • Kenwood KDC-W534Y - page 2

    2 | English Con tents Safety precautions 3 Notes 4 About AA C, MP3 and WMA 6 About CDs 7 General featur es 8 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Switching Display Dimmer Control Theft Deterrent F aceplate TEL Mute T uner fea tures 13 T uning T uning Mode (KDC-W534Y ) Station Pr eset Memor ...

  • Kenwood KDC-W534Y - page 3

    English | 3 Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot If you tr y to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. Lens F ogging When you turn on the car heater in cold weather , dew or condensation may form on the lens in the CD player of the unit. Called len ...

  • Kenwood KDC-W534Y - page 4

    4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when th ...

  • Kenwood KDC-W534Y - page 5

    English | 5 This Pr oduct is not installed by the manufac turer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that ha ve adopted separat e waste collection systems) Pr oducts with the symbol ( ...

  • Kenwood KDC-W534Y - page 6

    6 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not conforming to the specification, may not play normally , or the file and folder names may not display correctly . Playable A udio file • AAC, MP3, WM A • Attach the cor ...

  • Kenwood KDC-W534Y - page 7

    English | 7 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim ha ...

  • Kenwood KDC-W534Y - page 8

    8 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. V olume Increasing V olume T urn the [ VOL] knob clockwise. Decreasing V olume T urn the [ VOL] knob counterclockwise. Attenua tor T urning the volume down quickly . Press the [ A T T ] button. E ...

  • Kenwood KDC-W534Y - page 9

    English | 9 Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [ Q] button. When you press the button once , the current sound setting is displayed. Each time you press the button, the sound setting alternates. Sound setting Display Nat ...

  • Kenwood KDC-W534Y - page 10

    10 | English General fea tures Audio Setup Setting the Sound system, such as Volume offset and Loudness. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted altern ...

  • Kenwood KDC-W534Y - page 11

    English | 11 Dimmer Con trol Y ou can lower the brightness of the display by using the dimmer function. Press the [DIM] button f or at least 1 second. Each time you press the button f or 1 second, the Dimmer control turns ON or OFF . When the Dimmer control is ON, "DIM ON" is displayed. Switching Displa y Changing the information display ...

  • Kenwood KDC-W534Y - page 12

    12 | English General fea tures Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Press the Release butt on. Drop open the faceplate. 2 Drawing the fac eplate to left side pull it to forward and remov e it. • The faceplate is a precision piece of equipment and ...

  • Kenwood KDC-W534Y - page 13

    English | 13 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands. 3 T une up or down band Push the Contr ol knob to ...

  • Kenwood KDC-W534Y - page 14

    14 | English T uner features Station Pr eset Memor y Putting a station in the memory. 1 Select the band Push the Contr ol knob towards [FM] or [ AM]. 2 Select the frequency to put in the memor y Push the Contr ol knob towards [ 4 ] or [ ¢ ]. 3 Put the frequency in the memory Press the desired [1] — [6] butt on for at least 2 seconds. The preset ...

  • Kenwood KDC-W534Y - page 15

    English | 15 RDS featur es F unction of the KDC-W534 T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio . Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF . When traffic information is ON, "TI" ...

  • Kenwood KDC-W534Y - page 16

    16 | English RDS featur es F unction of the KDC-W534 Progr am T ype preset Putting the Pr ogram Type in the P reset button memory and quick recall. Presetting the Progr am T ype 1 Select the Program T ype to preset Refer to <PTY (Program Type)> (page 16). 2 Preset the Progr am T ype Press the desired [1] — [6] butt on for at least 2 seconds ...

  • Kenwood KDC-W534Y - page 17

    English | 17 Changing Language for PTY Function Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 16). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob, the language alternates between the langu ...

  • Kenwood KDC-W534Y - page 18

    18 | English CD play er featur es Playing CD & A udio file When there is no disc inserted 1 Drop open the faceplate Press the Release button. 2 Insert a disc. 3 Push the facepla te on the left side, and return it to its former position. • When the faceplate has been dropped open, it might interfere with the shift lever or other vehicle functi ...

  • Kenwood KDC-W534Y - page 19

    English | 19 F ast Forwarding and Re versing F ast Forwarding Hold down towar d [ ¢ ] with the Control knob. Release your finger to play the disc at that point. Reversing Hold down towar d [ 4 ] with the Control knob. Release your finger to play the disc at that point. • There is no sound while the Audio file is being searched. • Y ou cannot f ...

  • Kenwood KDC-W534Y - page 20

    20 | English CD play er featur es F unction of Audio file Folder Select Quickly selecting the folder you want to hear . 1 Enter F older Selec t mode Press the [F .SEL] button. "FOLD SEL " is displayed. During Select mode the folder information is displayed as shown below . Folder name displa y Displays the current folder name . 2 Select t ...

  • Kenwood KDC-W534Y - page 21

    English | 21 Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 2 Selec ...

  • Kenwood KDC-W534Y - page 22

    22 | English Menu system In Standby mode T ouch Sensor T one Setting the operation check sound (beep sound) ON/OFF . Display Setting "BEEP ON" Beep is heard. "BEEP OFF" B eep canceled. In Standby mode Manual Clock Adjustment • Y ou can do this adjustment when the <Synchronize Clock> (page 22) is set as OFF . 1 Select Clo ...

  • Kenwood KDC-W534Y - page 23

    English | 23 In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kH z)) are played , this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. P rocessing is optimized for the compr ession format ...

  • Kenwood KDC-W534Y - page 24

    24 | English Menu system F unction of the KDC-W534 AF (A lternative F requency) When the reception is poor , automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting " AF ON" The AF function is ON. " AF OFF" The AF function is OFF . When the AF func ...

  • Kenwood KDC-W534Y - page 25

    English | 25 In Standby mode Po wer OFF Timer Setting the timer to turn this unit’ s power OFF automatically when Standby mode continues. Using this setting can save the v ehicle’ s battery power . Display Setting "OFF – – –" Po wer OFF Timer function is OFF . "OFF 20M" (Original setting) T urns the power OFF after 20 ...

  • Kenwood KDC-W534Y - page 26

    26 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........1 4 ..........2 5 ..........1 6 ..........1 Installation Proc edure 1. T o prevent short circuits, remov e the key from the ignition and disconnect the - terminal of the battery. 2. Mak e the proper input and output wire connections for each unit ...

  • Kenwood KDC-W534Y - page 27

    English | 27 Connecting W ires to T erminals P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 REMO. CONT MUTE Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input Antenna Cord (ISO) Antenna Conversion A daptor (ISO–JASO) (Accessory 3 ) T o connect the Kenwood navigation system, consult your navigation manual. Wiring harness (Accessory 1 ...

  • Kenwood KDC-W534Y - page 28

    28 | English Connecting W ires to T erminals Connector F unc tion Guide Pin Numbers for ISO Connectors Cable Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White P ower Control A-7 Red Ignition (AC C ) A-8 Black Ear th (Ground) Connection Speaker Connector B-1 Purple Rear Right (+) B-2 Purple/Black Rear Right (–) B-3 Gray ...

  • Kenwood KDC-W534Y - page 29

    English | 29 Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off . 1 Ref er to the section <Removing the hard rubber frame> (page 30) and then remove the hard rubber frame. 2 Drop open the faceplat e by pressing the Release button. 3 Tighten the scr ew (ø2 × 5 mm) (Accessory ...

  • Kenwood KDC-W534Y - page 30

    30 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the r emoval tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is r emoved, remove the lower two locations. • The frame can be removed from the bottom side in the same manner ...

  • Kenwood KDC-W534Y - page 31

    English | 31 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn. ☞ After checking for shor t circuits in the wires , replace the fuse with one wi ...

  • Kenwood KDC-W534Y - page 32

    32 | English Disc source ? The specified disc does not play , but another one plays instead . ✔ The specified CD is quit e dir ty. ☞ Clean the CD. ✔ The disc is sev erely scratched. ☞ T r y another disc instead. ? Can ’t remove disc . ✔ The cause is that mor e than 10 minutes has elapsed since the vehicle ACC swit ch was turned OFF . ? ...

  • Kenwood KDC-W534Y - page 33

    English | 33 The messages shown belo w display your systems condition. TOC ERR: The CD is quite dirty. The CD is upside- down. The CD is scratched a lot. ➪ Clean the CD and load it correctly. E-05: The CD is upside -down. ➪ Load the CD correctly. E-99: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the &q ...

  • Kenwood KDC-W534Y - page 34

    34 | English Specifications subject to change without notice. WMA decode : Compliant with Windows Media Audio AAC decode : AAC-L C " .m4a" files Audio section Maximum output power : 50 W x 4 (KDC-W534Y ) : 45 W x 4 (KDC-W534) Output power (DIN 45324, +B=14.4V ) : 30 W x 4 (KDC-W534Y ) : 28 W x 4 (KDC-W534) Speaker impedance : 4 - 8 Ω T o ...

  • Kenwood KDC-W534Y - page 35

    B64-3266-00_English.Indd 35 B64-3266-00_English.Indd 35 05.10.21 9:51:51 AM 05.10.21 9:51:51 AM ...

  • Kenwood KDC-W534Y - page 36

    B64-3266-00_English.Indd 36 B64-3266-00_English.Indd 36 05.10.21 9:51:51 AM 05.10.21 9:51:51 AM ...

Manufacturer Kenwood Category Car Stereo System

Documents that we receive from a manufacturer of a Kenwood KDC-W534Y can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-W534Y manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-W534Y
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-W534Y.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-W534Y, service manual, brief instructions and user manuals Kenwood KDC-W534Y. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-W534Y.

Similar manuals

A complete manual for the device Kenwood KDC-W534Y, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-W534Y by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-W534Y.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-W534Y - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-W534Y, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-W534Y, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-W534Y - which should help us in our first steps of using Kenwood KDC-W534Y
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-W534Y
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-W534Y in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-W534Y?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-W534Y, ask a question using the form below. If a user had a similar problem with Kenwood KDC-W534Y it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)