English dropdown-ico

Manual Hamilton Electronics AM1000

18 pages 0.45 mb
Download

Go to site of 18

Summary
  • Hamilton Electronics AM1000 - page 1

    AM1000 INSTALLATION INSTRUCTIONS OUTSIDE TRANSMITTER AM1000 213 CARAWAY LN Cary NC 27519 1 ...

  • Hamilton Electronics AM1000 - page 2

    ...

  • Hamilton Electronics AM1000 - page 3

    Get Started! Pick three locations 1) a place for the transmitter 2) place for your studio or inside connection (can just be under a des k) and 3) a ground. Once you have planned t hese loca- tions so they will all work together you are ready! First, put your transmitter mount in, you can use stan- dard 1 1/4 antenna mast mount from Radio Shack or a ...

  • Hamilton Electronics AM1000 - page 4

    Now mount the transmitter to the m ast using the bracket (see bracket instructio ns). If you are not using a bracket, install transmitter to wall or acceptable confi guration. Install 102” Ante nna (Radio Shack # 21-903) to the transm itter, it screws into the t op. Connect the audio/power wire as sh own on fi rst page diagram , the gr ound wire ...

  • Hamilton Electronics AM1000 - page 5

    Please note that changes or modifications not expressly approved by RangeMaster for compliance could void the user's authority to operate the equipment. Installing the AM1000 transmitter This unit is meant to be installed by someone who has some radio background. If you don’t feel qualified to install thi s un it yourself contact a local rad ...

  • Hamilton Electronics AM1000 - page 6

    3 your wire is to large to fit into the bi nding po st use a short section of wire and a wi re nut to complete the connection. Weatherproof the wire nut connecti on. It is important to keep the ground wire away from metal on the way to ground rod to get good range and provide the best lightning protection. Keep the ground wire away from other metal ...

  • Hamilton Electronics AM1000 - page 7

    4 Step 4 If things look good so far take the tuning tool and rotate “TUNE” to obtai n a peak reading of the meter. When the meter peaks you are tuned. Be sure to stay away from the antenna while tuning. If you are to close to the antenna your body will affect where it tunes. Keep in mind that you need to see a peak. The meter should rise and fa ...

  • Hamilton Electronics AM1000 - page 8

    5 Now go and check your range. Use your car and your odometer to check the range. Do the final tune on “TUNE” (Check t o be sure the meter voltage is still peaked ). Adjust “AUDIO LEVEL” control for best sound on your radio. Keeping the antenna as verti cal as possible will help your range. It is also critical to keep the antenna away from ...

  • Hamilton Electronics AM1000 - page 9

    POWER ADJUST AM1000T Module (if installed ) COIL TUNE Audio Level CRYSTAL CAP TUNE TEST HOLES 6 ...

  • Hamilton Electronics AM1000 - page 10

    ...

  • Hamilton Electronics AM1000 - page 11

    AM1000T Power Set / Tuning Module Power Adjust LED J13 Coil Tune Cap Tune When transmitter is turned on, the com puter will start in Power Set mode if th ere is a shunt in J1 3 (Power is set last). When you are tuning you will get better readings with the power all the way down (Power Adjust counter clockwise). Also it will help if the Cap Tune (10 ...

  • Hamilton Electronics AM1000 - page 12

    To go to the Cap Tune program just leave the shunt in J 13 for 15 seconds, the LED will turn off. Take the shun t off j13 (and then replace shunt onto J13) and you are in the Cap Tune program. To find the peak voltage using this program you need to ge t used to working with the program . As the voltage is steady or going up the LED will remain gree ...

  • Hamilton Electronics AM1000 - page 13

    If you are using an Innovonics 222 be sure your output polarity is correct, here is how: 1. Turn the positive peaks all the way down 2. Turn the output level up until you get distortion, then back off a little (hair) for good sound. 3. Then turn the positive peaks all the way up, if you get distortion then the (output) terminals + and - a re probab ...

  • Hamilton Electronics AM1000 - page 14

    ...

  • Hamilton Electronics AM1000 - page 15

    COPY FEDERAL CO MMUNICATION S COMMISSION WASHINGTON, D. C. 20554 GRANT OF EQUIPMENT AUTHORIZATION COPY Certification Hamilton PCB Design 134 Wind Chime Ct. P.O. Box 20594, Raleigh, NC 27619 United States Date of Grant: 07/1 7/1998 Application Dated: 05/08/1998 Attention: Keith Hamilton NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to th ...

  • Hamilton Electronics AM1000 - page 16

    ...

  • Hamilton Electronics AM1000 - page 17

    ...

  • Hamilton Electronics AM1000 - page 18

    1.0 1.00 1.1 .910 1.2 .840 1.3 .770 1.4 .720 1.5 .670 1.6 .630 1.7 .590 1.8 .560 1.9 .530 2.0 .500 2.1 .480 2.2 .455 2.3 .435 2.4 .420 2.5 .400 2.6 .385 2.7 .370 2.8 .360 2.9 .345 3.0 .335 3.1 .325 3.2 .315 3.3 .305 3.4 .295 3.5 .285 3.6 .280 3.7 .270 3.8 .265 3.9 .255 4.0 .250 4.1 .245 4.2 .240 4.3 .233 4.4 .228 4.5 .223 4.6 .218 4.7 .213 4.8 .210 ...

Manufacturer Hamilton Electronics Category Satellite Radio

Documents that we receive from a manufacturer of a Hamilton Electronics AM1000 can be divided into several groups. They are, among others:
- Hamilton Electronics technical drawings
- AM1000 manuals
- Hamilton Electronics product data sheets
- information booklets
- or energy labels Hamilton Electronics AM1000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hamilton Electronics AM1000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hamilton Electronics AM1000, service manual, brief instructions and user manuals Hamilton Electronics AM1000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hamilton Electronics AM1000.

Similar manuals

A complete manual for the device Hamilton Electronics AM1000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hamilton Electronics AM1000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hamilton Electronics AM1000.

A complete Hamilton Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hamilton Electronics AM1000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hamilton Electronics AM1000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hamilton Electronics AM1000, that we can find in the current document
3. Tips how to use the basic functions of the device Hamilton Electronics AM1000 - which should help us in our first steps of using Hamilton Electronics AM1000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hamilton Electronics AM1000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hamilton Electronics AM1000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hamilton Electronics AM1000?

Use the form below

If you did not solve your problem by using a manual Hamilton Electronics AM1000, ask a question using the form below. If a user had a similar problem with Hamilton Electronics AM1000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)