English dropdown-ico

Manual Carrier Access Network Device Axxius 800

568 pages 8.25 mb
Download

Go to site of 568

Summary
  • Carrier Access Network Device Axxius 800 - page 1

    Ax x ius 800 U SER M ANUA L Part Number : 770-01 04 AG Produc t Rele ase: 2. 2 May 200 4 ...

  • Carrier Access Network Device Axxius 800 - page 2

    Copyri ght 200 4 Carrier A ccess Co rporation. All right s reserved . The information presented in th is manual is subject to change without notice and does n ot represent a commitment on the part of Carrier Access Corporation. T he hardware and sof tware described herein are fur nish ed unde r a li cens e o r no n- disc los ur e ag ree men t. Th e ...

  • Carrier Access Network Device Axxius 800 - page 3

    P RE FACE Pref ace Compliance Safety The Axxi us 800 is certified by Underwrite rs Laboratori e s and is in compli ance with UL 6095 0, 3r d Editio n; Safety of I nforma tion T echnolo gy Eq uipme nt and CSA/C2 2.2 N o 609 50. FCC Requiremen ts, Part 15 This equip ment has been te sted and found to comply with th e limits for a Class A di gital dev ...

  • Carrier Access Network Device Axxius 800 - page 4

    iv Axxius 800 - Release 2 .2 Preface Complia nce The Fac ility Inte rface Code (FIC) associated with each p rivate line appli cation repres ents the typ e of service that will be prov ided by the telep hone comp any. The fol lowing are curren tly registere d: An FCC-co mpliant tele phone an d modu lar plug is p r ovid ed with this equipm ent. Th is ...

  • Carrier Access Network Device Axxius 800 - page 5

    Axxiu s 800 - R elease 2.2 v Preface Comp lia nce In dust ry C ana da CS -0 3 Registr atio n Number: IC: 2638 A-80 0 ’ ’ NOTICE: This eq uipment me ets the ap plicable Industry Canada T erminal Eq uipment Techni cal Specificati ons. Thi s is confirmed by the registrat ion number. The abbrev iation, IC, be fore the registra tion number signifies ...

  • Carrier Access Network Device Axxius 800 - page 6

    vi Axxius 800 - Rel ease 2 .2 Preface Safety Information Safety Information CAUTION! A LWAYS USE CAUTION WHEN INSTALL ING TELEPHONE LI NES . R EAD THE CAUTIONS BELOW FOR DETAILS ON SAFETY GU IDEL INES TO P REVENT INJURY . l Never t ouch uninsul ated tele phone wir es and termina ls unless t he telepho ne lin e has been d isconn ected at the Net wor ...

  • Carrier Access Network Device Axxius 800 - page 7

    Axxiu s 800 - R elease 2.2 vii Preface Notices Notices This man ua l con tai ns im por ta nt inf or mati on a nd w arn ing s th at mu st b e fo llow ed to ensure s afe opera tion o f the equi pment. DANGER! A D ANGER NOTICE INDICATES THE PRESEN CE OF A HAZARD THAT CAN OR WI LL CAUSE DE ATH OR SEVERE PERSONA L INJU RY IF THE HAZARD IS NOT AVOIDED . ...

  • Carrier Access Network Device Axxius 800 - page 8

    viii Axxius 800 - Release 2 .2 Preface Electrostatic Discharge (ES D) Precautions Electrostatic Discharge (ESD) Precautions ESD can d amage proces sors, cir cuit car ds, and other el ectronic component s. Always obser ve the fo llowin g preca utions bef ore i nstalli ng a sys tem component . 1. Do not remov e a component fro m its prot ective pack ...

  • Carrier Access Network Device Axxius 800 - page 9

    Axxiu s 800 - R elease 2.2 ix Preface Warran ty Warra nty Carrier Access Corpo ration condition ally warrants to BUYER that PRODUCTS are free from substantial defect in mater ial and workm anshi p unde r norma l use give n pro per ins tallat io n and maint enan ce for the perio d of five y ears from the date of sh ipment by Carri er Access C orpora ...

  • Carrier Access Network Device Axxius 800 - page 10

    x Axxius 80 0 - Rel ease 2.2 Preface Warran ty Warranty Product Returns Before returning any equipment to Carrier Access Corporation, first contact the distribu tor or dealer from which you purc hase d the pr oduct . A Return Material Aut horization (RMA) number is required for all equipment returned to Carrier Access Corpo ratio n. Call Ca rrier A ...

  • Carrier Access Network Device Axxius 800 - page 11

    T ABLE OF C ONTENTS Prefac e Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii FCC Requiremen ts, Part 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii FCC ...

  • Carrier Access Network Device Axxius 800 - page 12

    xii Axxius 80 0 - Rel ease 2.2 Table of Contents Low Speed Protec tion card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1- 6 Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 24 VDC Power Supp ly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 13

    Axxiu s 800 - R elease 2.2 xiii Table of Contents 2 Physical Instal lation Unpacking and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Installation Enviro nment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Assembly o f Axxius 800 . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 14

    xiv Axxius 80 0 - Rel ease 2.2 Table of Contents Quick Configu ration Reload. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Setup of DS0 Management Ch annel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Equipment Req uired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Set ...

  • Carrier Access Network Device Axxius 800 - page 15

    Axxiu s 800 - R elease 2.2 xv Table of Contents clear key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-37 clear log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-37 clear (ocu dp) performan ce . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 16

    xvi Axxius 80 0 - Rel ease 2.2 Table of Contents log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-62 ping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-63 print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 17

    Axxius 800 - Re lease 2.2 xvii Table of Contents set ipds0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-90 set key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-91 set login auth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 18

    xviii Axxius 80 0 - Rel ease 2.2 Table of Contents set (router) rip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13 1 set (router) snmp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-132 set (router) stp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 19

    Axxiu s 800 - R elease 2.2 xi x Table of Contents set (v35) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-170 set (v54) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-172 set verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 20

    xx Axxius 80 0 - Rele ase 2.2 Table of Contents show (rou ter) lmi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-197 show (rou ter) login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19 7 show (rou ter) ntp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 21

    Axxiu s 800 - R elease 2.2 xxi Table of Contents status (adp cm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-225 status (adp cm) performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-226 status (adp cm) performance history . . . . . . . . . . . . . . . . . . . . . . . . . 5-227 status ...

  • Carrier Access Network Device Axxius 800 - page 22

    xxii Axxius 800 - Release 2 .2 Table of Contents telnet (router ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26 0 trace rou te . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-261 tracert (ro uter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 23

    Axxiu s 800 - R elease 2.2 xxiii Table of Contents Clocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Testing and Diagn ostics . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 24

    xxiv Axxius 800 - Release 2 .2 Table of Contents 9 ISDN BRI Card Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 ISDN BRI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 3-DS0 BRITE Mo de . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 25

    Axxiu s 800 - R elease 2.2 xxv Table of Contents Power Con sumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6 Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 26

    xxvi Axxius 800 - Rel ease 2 .2 Table of Contents 12 Power Suppl y Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12- 2 Technical Specifications . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 27

    Axxiu s 800 - R elease 2.2 xxvii Table of Contents Card Con figuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6 CLI Comman ds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6 Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 28

    xxvii i Axxius 800 - Release 2 .2 Table of Contents 15 Termin al Server Router Card Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2 Quad TSR with TBOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-2 Features. . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 29

    Axxiu s 800 - R elease 2.2 xxix Table of Contents 16 V.35/. 54 Card Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-3 Additional V.54 Features . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 30

    xxx Axxius 800 - Release 2 .2 Table of Contents Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-5 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-5 Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 31

    Axxiu s 800 - R elease 2.2 xxxi Table of Contents C Loopback Tests Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Test Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2 Identify Alarm . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 32

    xxxii Axxius 80 0 - Rel ease 2. 2 Table of Contents ...

  • Carrier Access Network Device Axxius 800 - page 33

    C HAPTER Base Platform In this Chapter n Overview n F eatures n Technic al Sp eci ficat io ns n Chassi s n Bu ilt-In Ca rd Handles n Management Ports n Local an d Remo te Mana gement n Control Panel Int erfaces n Control Panel LEDs n ACO ...

  • Carrier Access Network Device Axxius 800 - page 34

    1-2 Axxius 800 - Release 2 .2 Bas e P lat f orm Overview Ove rvi ew The Axxi us 800 Acces s Inte gration Platform s olves t oday’s pr oblems o f multipl e boxes , scala bility, space, power , and env ironmental const raints a ssociat ed with deli vering voi ce and data s ervic es. The Axxi us 800 defin es a new le vel of funct ional ity and p erf ...

  • Carrier Access Network Device Axxius 800 - page 35

    Axxiu s 800 - R elease 2.2 1-3 Base Platform Feat ur es The Contr ol Panel Inter face ca rd provid es front acce ss to all the physical interfac es of the DS1 or DS3 Contro ller cards. It provides fou r RJ-48C DS1 conne ctions when usi ng the DS1 Controll er and two s ets of DS3 SMB interf aces whe n using the DS3 Controll er. Addi tionall y, the C ...

  • Carrier Access Network Device Axxius 800 - page 36

    1-4 Axxius 800 - Release 2 .2 Bas e P lat f orm Contr olle rs Controllers The Axxi us 800 has t wo cont rollers availabl e, one cont rolle r can supp ort the s ystem, however with two c ontrol ler (sa me type) the syst em is re dundant. Dual DS3 Controller Feature s two DS3 po rts with integrated 3/1 /0 cros s-connect matrix, p roviding n on- bloc ...

  • Carrier Access Network Device Axxius 800 - page 37

    Axxiu s 800 - R elease 2.2 1-5 Base Platform Servi ce Card s OCU-DP Service car d The OCU-DP s ervice ca rd is ava ilable i n a Sing le or Quad p ort opt ion. The OCU-DP int erface se rvice allo ws Digit al Data Ser vice ( DDS) circui t te rminat ions on the Adit 600 pl atform. Pro vides the el ectrica l and physi cal ter mination of a 4-wi re DDS ...

  • Carrier Access Network Device Axxius 800 - page 38

    1-6 Axxius 800 - Release 2 .2 Bas e P lat f orm Power Su pplies Low Speed Protection ca rd Low spee d protect ion pr ovides bac kup cir cuitry f or any T1 se rvice port o n any Quad T1 ser vice car d in the Axxi us cha ssis. The Re lay car d provide s the p hysical conne ctivity between t he “Pro tected” T1 servi ce port and the “Bac kup” T ...

  • Carrier Access Network Device Axxius 800 - page 39

    Axxiu s 800 - R elease 2.2 1-7 Base Platform Technical Specificatio ns Capacities l 2 x Power Supply car ds l 2 x DS3 or DS1 Control ler card s l 1 x Cont rol Panel Inter face car d l 8 x uni versal s ervic e cards l 36 T1 po rts (8 x Qua d T1 ser vice car ds + 4 on DS1 Cont roll er) l 1536 DS0 non-blocki ng cros s-connect capab ility Redundancy l ...

  • Carrier Access Network Device Axxius 800 - page 40

    1-8 Axxius 800 - Release 2 .2 Bas e P lat f orm Technical Specifica tions Alarm Connector s The al arm cont act outp uts ar e per Te lcordia defini tions fo r visi ble and a udible . They oper ate per the sp ec with t he exceptio n that th e audible out puts ca n be disabled with the ACO button. l The al arm output contac ts are de signed for use a ...

  • Carrier Access Network Device Axxius 800 - page 41

    Axxiu s 800 - R elease 2.2 1-9 Base Platform Chassi s Chassis Controller Relay Card Cards (A1 & A2) Service Ca rd Slots 1-8 Power Supplies (P1 & P2) Future Development Ground Terminals Audible Power BITS Visible Clock 1 and 2 Exter nal Alar m Slot 1-8 Wire-W rap Connectors P1 and P2 Alarms Alarms Inputs Future Devel opment Interface Car d ...

  • Carrier Access Network Device Axxius 800 - page 42

    1-10 Axxius 80 0 - Rele ase 2.2 Bas e P lat f orm Built-In Card Handles Built-In Card Handle s Sever al of the cards for the Axx ius 800 are desi gned wit h a handle b uilt into the fac epla te t o ass ist in the remo val o f t he c ard from the c has si s. Th is h and l e sli des out away f rom the unit , crea ting a han dle fo r a more effecti ve ...

  • Carrier Access Network Device Axxius 800 - page 43

    Axxiu s 800 - R elease 2.2 1-11 Base Platform Control Panel I nterfaces Control Pane l Inte rfaces SMB connector (fema le) The r ecommended mate for the SMB connect or is a n SMB ri ght an gle cri mp connec tor. DS3 (SMB) Connectors (4) RS-232 10Ba se-T Ethernet DS1 (R J-48) Connectors (4) ...

  • Carrier Access Network Device Axxius 800 - page 44

    1-12 Axxius 80 0 - Rele ase 2. 2 Bas e P lat f orm Control Panel I nterfaces RS-232 Craft Port (Femal e DB-9) The RS-2 32 craft port conne cts vi a a female DB- 9 connec tor on the Axxius 800. The pi nouts are as follo ws: Pin Nu mb er Direct ion Descripti on 1 Outbou nd Carrie r Detect 2 Outbound Receive Data 3 Inboun d Transmit Data 4 Inbound Dat ...

  • Carrier Access Network Device Axxius 800 - page 45

    Axxiu s 800 - R elease 2.2 1-13 Base Platform Control Panel I nterfaces DS1 Connection Ports The DS1 c onnection ports are each e quipped with a st andard RJ-28C (female) on the Axx ius 800 uni t. The pi nouts are as fol lows: DS1 (RJ- 48C) 10/100 Base-T Ethernet The 1 0/1 00B as e-T Ethe rnet (f emal e) p ort t o co nne ct to a re mo te mana ge me ...

  • Carrier Access Network Device Axxius 800 - page 46

    1-14 Axxius 80 0 - Rele ase 2.2 Bas e P lat f orm Control Panel I nterfaces Control Pane l Interfac e Card Jumpers The C ont rol Pan el In terf a ce ca rd is pro vid ed w ith a jump er th at allo ws the u ser to pu t a -3 dB p ad in the tr ans mit DS3 si gna l pat h to lo wer th e ou tpu t to a s hor ter li ne le ngt h. This prevents e rrors whe n ...

  • Carrier Access Network Device Axxius 800 - page 47

    Axxiu s 800 - R elease 2.2 1-15 Base Platform Control Pa nel LEDs Control Pane l L EDs Alarm LEDs LED State Desc ription CRITICAL Off No critical alarms present Red Critical alarms present MAJOR Off No major alarms pr esent Red Major alarm pre sent MINOR Off No minor alarms pres ent Red Minor alarms present ACO Off Normal mode. No alarms are being ...

  • Carrier Access Network Device Axxius 800 - page 48

    1-16 Axxius 80 0 - Rele ase 2. 2 Bas e P lat f orm Contr ol Panel L EDs Ethe rnet LEDs When Sta tus LED is on or flash ing: LED State Desc ription ST ATUS Off Li nk Do wn Green Link Up Flashing Green Traffic on Link LED State Des c rip tion 10/100 Off Link is 10 Mb Green Link is 100 Mb ...

  • Carrier Access Network Device Axxius 800 - page 49

    Axxiu s 800 - R elease 2.2 1-17 Base Platform ACO ACO The Ala rm Cutoff f eature per mits t he oper ator to t emporaril y sil ence the al arm out puts while te sting and repai ring the Axxius 80 0. ACO does no t stop al arm messages . Pres sing the ACO pu sh but ton switch disab les the alarm re lays and lig hts the ACO sta tus LED. This kee ps the ...

  • Carrier Access Network Device Axxius 800 - page 50

    1-18 Axxius 80 0 - Rele ase 2.2 Bas e P lat f orm ACO ...

  • Carrier Access Network Device Axxius 800 - page 51

    C HAPTER Physica l Installation In this Chapter n Unpacking an d Inspection n Installat ion Env ironment n Assemb ly of Axxi us 800 n Rack Mount ing ...

  • Carrier Access Network Device Axxius 800 - page 52

    2-2 Axxius 800 - Release 2 .2 Physical Instal lation Unpacking and Insp ection Unpa cking an d Inspe ction W ARNING! O BSERVE PRECAUT IONS FOR HANDLING ELEC TROSTATIC DEVICES . 1. Insp ect conta iners for damage d uring shi pment. Repo rt any damag e to t he fre ight carr ier f or pos sible in surance clai ms. 2. Com par e pa cki ng l ist w ith off ...

  • Carrier Access Network Device Axxius 800 - page 53

    Axxiu s 800 - R elease 2.2 2-3 Physical Installati on Ins tall ati on Env iron me nt Installation Environment The en vironment i n which y ou are ins talling the Axxius 800 must me et the fo llowin g condi tions: DANGER! R ESTRICTED A CCESS L OCATION FOR A CCESS 800: A CCESS CAN ONLY BE GAI NED BY SER VIC E PERSONNEL OR USERS WHO HAVE BEEN INSTRUCT ...

  • Carrier Access Network Device Axxius 800 - page 54

    2-4 Axxius 800 - Release 2 .2 Physical Instal lation Assem bly o f Ax xius 800 Asse mbly of A xxius 800 The ca rds shou ld be posi tione d accordi ng to t he followi ng guid elines: l Power Su pply(s) 2 4 or 48 VDC Single Po wer Suppl y - slot Power 1 or Power 2 Dual Power Supplie s - slot Power 1 and Powe r 2 l Cont rol ler car d(s ) DS1 or D S3 S ...

  • Carrier Access Network Device Axxius 800 - page 55

    Axxiu s 800 - R elease 2.2 2-5 Physical Installati on Rack Mountin g Rack Mounting The Axx ius 800 c an be mounted on a 19 or 23 i nch ra ck with Ca rrie r Access mounting brac kets. NOTE: The Axxius 800 r equires at l east 3/4 inc hes of free ai r space ab ove and below the chassis ( approx 1/2 RU) for air circu lation. Always leave at least 14&qu ...

  • Carrier Access Network Device Axxius 800 - page 56

    2-6 Axxius 800 - Release 2 .2 Physical Instal lation Rack Mountin g To maint ain prope r convect ion coo ling, maint ain at l east 1 /2 RU between t he Axxius and any other equip ment ( each Axxius occu pies 3 RU of ra ck spa ce). T herefore , if one Axxius is mounted above an other Axxius , then there woul d be a tota l of 1 RU between the m (1/ 2 ...

  • Carrier Access Network Device Axxius 800 - page 57

    C HAPTER Electrical Installation and Cabling In this Chapter n Com plia nt In stalla tion n Chassi s Con nec tions n Power Connect ions n Ext ern al Al arm Inp uts n Visible and A udible Alarms n BITS Cl ock 1/BITS C lock 2 n Slot (1-8) Wire-Wrap Connec tors ...

  • Carrier Access Network Device Axxius 800 - page 58

    3-2 Axxius 800 - Release 2 .2 Electrical I nstallation and C abling Complia nt Insta llation Compliant Installation W ARNING! A LL TELECOMMU NICATION NET WO RK CONNECTIONS MUST USE MINIMUM 26 AWG WIR E . 1. Mount un it in an a rea that meets En vironment c onditions , see Inst allat ion Environmen t on pag e 2-3. 2. Unit shou ld have power su pply( ...

  • Carrier Access Network Device Axxius 800 - page 59

    Axxiu s 800 - R elease 2.2 3-3 Electrical Installation an d Cabling Compli ant Installat ion Ferrite Beads To be com pli ant wi th FC C Part 15 EM I lim its with the Quad DS1 A DP CM se rvi ce ca rd insta lled : l Route alarm c ables sepa rate from th e rear pan el ti p/ring c abling (wire wrap pins ). l Instal l fer rite bea d accompanyi ng this c ...

  • Carrier Access Network Device Axxius 800 - page 60

    3-4 Axxius 800 - Release 2 .2 Electrical I nstallation and C abling Chass is Connect ions Chassis C onnections The fo llowin g illust rations show all connec tors on t he rea r, as well as the front (inter face card) of t he Axxius 8 00. Back of the Axxius 8 00: l Audible Alarms l External Alarm I nputs l Visible Alarms l Input (power, P1 a nd P2) ...

  • Carrier Access Network Device Axxius 800 - page 61

    Axxiu s 800 - R elease 2.2 3-5 Electrical Installation an d Cabling Chas sis Co nne ctio ns Front of the Axxius 800 - I nterf ace Card l 10Base-T Ethe rnet (RJ- 45) l RS-232 Craft Port l DS3-1 and 2 Tran smit and Rec eive co nnectors (SMB) l DS1 (1-4) conn ectors ( RJ-48) For in format ion on thi s card and al l connec tors s ee Control Pane l Inte ...

  • Carrier Access Network Device Axxius 800 - page 62

    3-6 Axxius 800 - Release 2 .2 Electrical I nstallation and C abling Chass is Connect ions Chassis Ground Connector 1. Route wir e (#6 or #8 AWG co pper) fro m buildi ng ground t o lug on Axxi us 800. 2. Strip ins ula tio n off wire end , if nec essar y . 3. Loosen compressi on screw unt il ope ning is l arge en ough to acc ept gr ound wire. 4. Inse ...

  • Carrier Access Network Device Axxius 800 - page 63

    Axxiu s 800 - R elease 2.2 3-7 Electrical Installation an d Cabling Chas sis Co nne ctio ns Power Connections There ar e thre e power supp lies availabl e with the Axxius 80 0; 24 VDC an d 48 VDC and 48 VDC NI, all use this connector . The Axxiu s 800 su pports a redundan t power sys tem , the ref or e the re i s IN PU T (p ower ) P1 and P2 . Input ...

  • Carrier Access Network Device Axxius 800 - page 64

    3-8 Axxius 800 - Release 2 .2 Electrical I nstallation and C abling Chass is Connect ions 5. Ensu re th at n o ba re w ire sho ws af ter th e w ire s are ins tall ed. 6. Plug conne ctor in the INPUT ( power) connector , as see n in th e graphic and secu re with se t scre ws. 7. Apply p ower to conn ector . 8. Verify wi th vol tmeter that vol tage i ...

  • Carrier Access Network Device Axxius 800 - page 65

    Axxiu s 800 - R elease 2.2 3-9 Electrical Installation an d Cabling Chas sis Co nne ctio ns External Alarm I nputs The ex ternal a larm input connect or suppor ts 10 a larm input s and is compose d of two 10-pi n connect ors (t wo input pai rs for e ach). 1. Strip wi re so t hat appro ximately 5 /16 of bare wire i s expo sed. 2. Insert wire int o o ...

  • Carrier Access Network Device Axxius 800 - page 66

    3-10 Axxius 80 0 - Rele ase 2.2 Electrical I nstallation and C abling Chass is Connect ions Visible and Audible Alarms The ex ternal a larm con nectors a re six-p in conne ctors wit h two out put pair s for each alarm le vel ( pins 1 & 2 for minor , pins 3 & 4 f or majo r and 5 & 6 for c ritical a larms). 1. Strip wi re so t hat appro x ...

  • Carrier Access Network Device Axxius 800 - page 67

    Axxiu s 800 - R elease 2.2 3-11 Electrical Installation an d Cabling Chas sis Co nne ctio ns BITS Clock 1/BITS Clock 2 The ex ternal a larm connec tors a re three -pin wire -wrap co nnectors. One for each, Tip (T), Ring (R) and Shield (S). Ti p and Ring are the t wo conne ctions fo r the 1 00 ohm diff erenti al sign al to the box. Sh ield i s for g ...

  • Carrier Access Network Device Axxius 800 - page 68

    3-12 Axxius 80 0 - Rele ase 2.2 Electrical I nstallation and C abling Chass is Connect ions Slot (1-8) Wire-Wrap Connector s The Ax xius 800 provid es wir e-wrap c onnect ors fo r each slot ( 1-8) of the unit. Pinou ts are cle arly label ed with the pins. CAUTION! D ISCONNECT FROM NETWORK BEF OR E INSTALLING WI RE - WRAP CONNECTIONS . Wire-Wrap Con ...

  • Carrier Access Network Device Axxius 800 - page 69

    Axxiu s 800 - R elease 2.2 3-13 Electrical Installation an d Cabling Chas sis Co nne ctio ns Wire-Wrap Pinout for 4 Wire Services Wire -Wrap Pins T1 Name D esc rip tio n 1TX Port 1 Trans mit Ring To DS1 network Transmit Tip To DS1 network 1RX Receive Ring Receive from DS1 network Receive Tip Receive from DS1 n etwork 2TX Port 2 Trans mit Ring To DS ...

  • Carrier Access Network Device Axxius 800 - page 70

    3-14 Axxius 80 0 - Rele ase 2.2 Electrical I nstallation and C abling Chass is Connect ions Wire-Wrap Pinout 2 Wire Services Wire-Wrap Pi ns Descri ption T1 Channel 1 Tip R1 Channe l 1 Ri ng T2 Channel 2 Tip R2 Channe l 2 Ri ng T3 Channel 3 Tip R3 Channe l 3 Ri ng T4 Channel 4 Tip R4 Channe l 4 Ri ng T5 Channel 5 Tip R5 Channe l 5 Ri ng T6 Channel ...

  • Carrier Access Network Device Axxius 800 - page 71

    Axxiu s 800 - R elease 2.2 3-15 Electrical Installation an d Cabling Chas sis Co nne ctio ns Standard Telco Color Code Circ uit connec tions ar e made at the wire- wrap co nnecto rs. The p inouts ar e as foll ows: Pair Pin Locati on Function Color Code 12 6 1 Ti p Cha nne l 1 Ring Ch annel 1 Whit e/B lue Blue /White 22 7 2 Ti p Cha nne l 2 Ring Ch ...

  • Carrier Access Network Device Axxius 800 - page 72

    3-16 Axxius 80 0 - Rele ase 2.2 Electrical I nstallation and C abling Chass is Connect ions Pair Pin Locati on Function Color Code 15 40 15 Ti p Cha nne l 15 Ring Ch annel 1 5 Black/Slate Slate/Black 16 41 16 Ti p Cha nne l 16 Ring Ch annel 1 6 Yellow/Blue Blue/Yello w 17 42 17 Ti p Cha nne l 17 Ring Ch annel 1 7 Yello w/Orange Orange/Yello w 18 43 ...

  • Carrier Access Network Device Axxius 800 - page 73

    C HAPTER Configuration In this Chapter n Setting u p a CLI Conn ection n Syst em In fo rma ti on n Basi c System Setup n Quick C onfiguration R elo ad n Setup of DS0 M anagement Chann el ...

  • Carrier Access Network Device Axxius 800 - page 74

    4-2 Axxius 800 - Release 2 .2 Configur ation Setting up a C LI Conn ection Setting up a CLI Conn ectio n NOTE: The Default IP addres s of the Axxi us 800 Control ler (DS1 o r DS3) is 10.0.0. 10. T o co nnect to t he CLI, set up the c onnection : l If conne cting via the e therne t 10Base-T connect ion, us e a Telnet TCP/IP program to acces s the CL ...

  • Carrier Access Network Device Axxius 800 - page 75

    Axxiu s 800 - R elease 2.2 4-3 Conf ig ur atio n System In formatio n System Information Once a management se ssion h as bee initiated (T eln et or Hyper term) the syste m inf orma tion will b e di spl aye d si milar to th e fo llo wing : Carrier Access - Axxi us Product Line 02:03:08 01/01/2002 Login: helen Status Equipment: CardType St atus SW Ve ...

  • Carrier Access Network Device Axxius 800 - page 76

    4-4 Axxius 800 - Release 2 .2 Configur ation Ba sic S yste m S etu p Basi c Syste m Setup Initia l Setup Use th e fo llo wing com man ds f or y our in itia l se tup , for fu rth er in fo rma tion s ee th e spec ific com mand list ed in Cha pter 5, CLI Commands. NOTE: Removing an active Controll er is not recommende d, use the switch cont roller c o ...

  • Carrier Access Network Device Axxius 800 - page 77

    Axxiu s 800 - R elease 2.2 4-5 Conf ig ur atio n Basi c Sy stem Setu p Set Up Security Use t he followi ng commands to set up the sec urity on t he Axxius 8 00. Set Up IP Addresses for Telnet CLI Use t he followi ng commands to setup T elnet ad dresse s for Co mmand Line I nterfac e (CLI ). Upgrade the Axxius 800 Software Use t he follo wing comman ...

  • Carrier Access Network Device Axxius 800 - page 78

    4-6 Axxius 800 - Release 2 .2 Configur ation Ba sic S yste m S etu p Set Up a DS0/Channel Use t he followi ng commands to set up a DS0. Set Up a DS1/T1 Use th e followi ng commands t o set up a DS1/T1. See the set (ds1) command for more deta ils. Command Descri ption set {ds0-addr} type {data|voice} Set the channel type. See set (ds0) command for d ...

  • Carrier Access Network Device Axxius 800 - page 79

    Axxiu s 800 - R elease 2.2 4-7 Conf ig ur atio n Basi c Sy stem Setu p Set Up a DS3 Use t he followi ng commands to set up a DS3. See t he se t (ds 3) command for more deta ils. Command Descri ption set {ds3-addr} up Activate the port. set {ds3-addr} id {"id-name"} Set the DS3 ID. set {ds3-addr} clock {loop|normal} Set the transmit clock ...

  • Carrier Access Network Device Axxius 800 - page 80

    4-8 Axxius 800 - Release 2 .2 Configur ation Ba sic S yste m S etu p Establish a Static Channel Connection Use t he followi ng commands to establ ish a st atic c hannel con necti on. Command Descri ption set {ds3-addr} protect {off|on} Set po rt protect ion on the DS3. set {ds3-addr} reversion {off|on} Set pro tection r eversion on the DS3. set {ds ...

  • Carrier Access Network Device Axxius 800 - page 81

    Axxiu s 800 - R elease 2.2 4-9 Conf ig ur atio n Basi c Sy stem Setu p Setup of ADPCM Set Up a V.35 Por t Use t he followi ng commands to set up a V .35 port . Command Descri ption Connect T1 cable to port 1 of the ADPCM serv ice card set {adpcm_card-addr} {none|map1|map2|map3} Enable compres sing by selecting Map t ype. Note: none disabl es compre ...

  • Carrier Access Network Device Axxius 800 - page 82

    4-10 Axxius 80 0 - Rele ase 2. 2 Configur ation Ba sic S yste m S etu p Set Up a Single Channel PO TS card Use t he followi ng commands to set up a POTS card . Change the IP Address of the DS0 Management Channe l Use t he followi ng commands to change t he IP over DS0 Manageme nt Channe l for th e Axxius 800. Command Descri ption set {fxsPS-addr|fx ...

  • Carrier Access Network Device Axxius 800 - page 83

    Axxiu s 800 - R elease 2.2 4-11 Conf ig ur atio n Quick Configu ration Reload Quick Conf iguration Reload The print config command ca n be used as a quick way to reloa d a configurat ion into an Axxius un it, in the ev ent that the con figurat ion has been lost due to software relo ad pr obl ems o r op era tor e rro r . The downl oad of the f ile g ...

  • Carrier Access Network Device Axxius 800 - page 84

    4-12 Axxius 80 0 - Rele ase 2. 2 Configur ation Quick Conf igurati on Reload 5. Sele ct the [S TART ] but ton, th e window will close and the ope rator wil l be retu rned to th e A xxiu s com ma nd li ne. 6. Press [E NTER ] to downl oad. Axxius wi ll gener ate an exe cutable f ile of all conf igurable commands an d save it to the file loc ation def ...

  • Carrier Access Network Device Axxius 800 - page 85

    Axxiu s 800 - R elease 2.2 4-13 Conf ig ur atio n Quick Configu ration Reload 3. Sele ct the ASCII Setup but ton. 4. Set th e Line delay t o 50 mill iseconds and the Character dela y to 5 mill isecon ds. 5. Sele ct the [O K] butto n back to t he Main Hype rTerminal screen. 6. Sele ct Transfer/Se nd Text File ... f rom the menu ba r. Hypert erm will ...

  • Carrier Access Network Device Axxius 800 - page 86

    4-14 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l Setup of DS0 Managemen t Chann el The DS0 Mana gement Channe l prov ides an al terna tive to t he FDL link f or manageme nt informa tion where FDL is una vailable . The Access Navigat or and the remote Axxi us 800 wi ll use I P packets t o communic ate mana gemen ...

  • Carrier Access Network Device Axxius 800 - page 87

    Axxiu s 800 - R elease 2.2 4-15 Conf ig ur atio n Setup of DS0 Mana gement C hannel Equipment Required l Acces s Navigator (versi on 1.7) l (1) Coll ocated Router This exampl e uses a Axxius 800 (version 1.0) with a Axxius TS R card (versi on 1.0) l Remote Axxiu s (1-2 4) Axxiu s 800 (vers ion 1.0 ) l PC l Cables Ethernet T1 Basic S etu p Axxius wi ...

  • Carrier Access Network Device Axxius 800 - page 88

    4-16 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l The f ollowing i s the Addr ess an d DS1 assign ments us ed in this exa mple. Thi s will conf igure 1 Acce ss Navigat or, one TSR and 24 r emote Axxius units. LAN addr WAN addr Navigator DS1 Navig ator mgmt DS0 to Router Axxius Axxius DS0 to Navigator Naviga tor ...

  • Carrier Access Network Device Axxius 800 - page 89

    Axxiu s 800 - R elease 2.2 4-17 Conf ig ur atio n Setup of DS0 Mana gement C hannel Set IP Conf igura tion of PC 1. Set IP Addr ess t o 192.168. 201.102 2. Set Gatewa y to 192 .168.201.10 1 (Router LAN Add ress) Configuring the Axxius Rou ter NOTE: The Remote Axx ius WAN address MUST h ave a diff erent subnet than the Axxius Contr oller Ethernet ad ...

  • Carrier Access Network Device Axxius 800 - page 90

    4-18 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l Add and Enable a ll Remote Axxius Needed Telnet into the TSR card 1. From the CLI execut e a Telnet command to the TSR card . Telne t {slot} Example: telnet 1 The example will Teln et into t he rout er locat ed in slot 1. 2. Enter pa ssword ( default is "a d ...

  • Carrier Access Network Device Axxius 800 - page 91

    Axxiu s 800 - R elease 2.2 4-19 Conf ig ur atio n Setup of DS0 Mana gement C hannel Configure Trunk Connections 1. Sele ct Configura tion < Profile Directory > -> from th e Rou ter Main Menu and select [ E NTER ] . 2. Sele ct Router CARD <Setup - > from th e Pr ofil e wi ndo w a nd s ele ct [ E NTER ] . 3. Sele ct Trunk <Configure ...

  • Carrier Access Network Device Axxius 800 - page 92

    4-20 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l 4. For al l WAN port numb ers alrea dy assigne d a DS0 for management sel ect < Frame-Relay 1490 > as the WAN c onnections type. 5. Sele ct the PVC Management as < Disable d > . 6. Sele ct the [E SC ] key to Exit and <Ye s> to sav e ch ang es. T ...

  • Carrier Access Network Device Axxius 800 - page 93

    Axxiu s 800 - R elease 2.2 4-21 Conf ig ur atio n Setup of DS0 Mana gement C hannel 3. Set t he follo wing on t his sc reen: Sele ct the IP Protocol Eth II (X), all ot hers shou ld not be select ed. Set t he LAN Networks Updates for IP and IPX to < Neither > . Set t he LAN IP Address to 192.168.201 .101 (Rout er IP Addr ess) a long with the S ...

  • Carrier Access Network Device Axxius 800 - page 94

    4-22 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l 2. Set t he follo wing on t his sc reen: Rename RemoteUnit (de fault name) t o Axxius1 . Set WAN Netwo rks Updates for IP to <Never> . Set WAN IP: Numbered to <No > . 3. [T AB ] to Setup: <Stat ic/VPN Network s > (sc roll to th is se lection if ...

  • Carrier Access Network Device Axxius 800 - page 95

    Axxiu s 800 - R elease 2.2 4-23 Conf ig ur atio n Setup of DS0 Mana gement C hannel 6. Set De vice Name to Axxius1 Set t he IP Address to 192.168.202.1 (Axxi us1 WAN addre ss) Set t he Subnet Mask to 255.255.255.255 Set t he M etric to 1 7. Sele ct [E SC ] t o exit and <Yes> to save chan ges. 8. Sele ct Setup: <Trun k Port > an d select ...

  • Carrier Access Network Device Axxius 800 - page 96

    4-24 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l 9. Sele ct the following on thi s scre en: At the Selec t WAN Port Number: < None> , scroll from None to 1 (which is th e rem ote Axxi us1 ). Set DLCI to 16 . 10. Sel ect [E SC ] to ex it the Tru nk Port co nfigurat ion win dow. 11. Sel ect [E SC ] to ex it ...

  • Carrier Access Network Device Axxius 800 - page 97

    Axxiu s 800 - R elease 2.2 4-25 Conf ig ur atio n Setup of DS0 Mana gement C hannel Reinitiali ze the Router 1. Sele ct Exit <R einitial ize > from the Ro ute r mai n window and s elect [E NTER ] . 2. Sele ct < YES > and sele ct [E NTER ] to Rei niti aliz e th e TSR Ca rd. T his will save all the c hanges recently made to the Router . ...

  • Carrier Access Network Device Axxius 800 - page 98

    4-26 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l Configuration of Remote Axxius Note: The Et hernet cannot be conn ected to t he Remote Axx ius during th e setu p of the DS0. Use t he followi ng commands to setup the IP o ver DS0 Management Channel for each Remote Axxius 8 00 . connect to the Axxius1, use the f ...

  • Carrier Access Network Device Axxius 800 - page 99

    Axxiu s 800 - R elease 2.2 4-27 Conf ig ur atio n Setup of DS0 Mana gement C hannel Configuration of Access Navi gator Note: The Et hernet cannot be conn ected to t he Remote Axx ius during th e setu p of the DS0. The fo llowing se tup, cr eates a path from th e Axxius Rout er to the remo te Axxius. Note: the foll owing commands are assuming that t ...

  • Carrier Access Network Device Axxius 800 - page 100

    4-28 Axxius 80 0 - Rele ase 2. 2 Configur ation Set up of DS 0 Ma nage m ent C hanne l Testing the DS0 M anagement Channel Afte r the DS0 management cha nnels has bee n setup wit h one Remote Axxius, te st the manageme nt channel . 1. PING 192.168.20 2.1 (Axxi us1) from the Axxius Rou ter. 2. PING 192.168.20 2.1 (Axxi us1) from the Navigat or. 3. P ...

  • Carrier Access Network Device Axxius 800 - page 101

    C HAPTER CLI Commands In this Chapter n Command Line Interface Help n CLI Comman ds ...

  • Carrier Access Network Device Axxius 800 - page 102

    5-2 Axxius 800 - Release 2 .2 CLI Comman ds Command Line Interfa ce He lp During a CLI session, help is available at any time. ? or hel p Type a ? (or "help" before a command) at any time for quick command information > add ? add ................ ..... Create users or profiles {rtr_card-addr} ...... Create profile, object o r service o ...

  • Carrier Access Network Device Axxius 800 - page 103

    Axxiu s 800 - R elease 2.2 5-3 CLI Comman ds the [TAB] feature, scro ll through a ll available o ptions for this command: > set [TAB] will scroll through the set co mmands, with each <TAB> > set alarms [TAB] > set autoexit [TAB] > set clock1 ... etc. If another space is placed after the co mm and and [T AB] is pressed a gain, the ...

  • Carrier Access Network Device Axxius 800 - page 104

    5-4 Axxius 800 - Release 2 .2 CLI Comman ds CLI Commands For maneuverability through these commands , all co mmand names in blue or itali cs are hyper linked. aco (Alarm Cut Off) pri nt add rename (router) alarms reset clear restore connect rtrpin g delete set disconnect show exit status install stor e load switch log telnet ping trace r oute ...

  • Carrier Access Network Device Axxius 800 - page 105

    Axxiu s 800 - R elease 2.2 5-5 CLI Comman ds aco (Alarm Cut Off) aco (Ala rm Cut Off) Use the aco command to activate the Alarm Cut Off, which opens the alarm relay contacts on the back of the unit. Synt ax: aco Exampl e: aco ACO LED To turn off ACO, all alarms must be cleared, or the operator can reset the controller, which will set the ACO back t ...

  • Carrier Access Network Device Axxius 800 - page 106

    5-6 Axxius 800 - Release 2 .2 CLI Comman ds add add Use the add command to create us ers, interfaces, serv ices or profiles . See the following sectio ns for detailed informatio n on the following add comman ds add (ds1) ais add (route r) dhcp server opti on add (route r) dns proxy add (route r) remote add (route r) snmp community add (route r) snm ...

  • Carrier Access Network Device Axxius 800 - page 107

    Axxiu s 800 - R elease 2.2 5-7 CLI Comman ds add add (ds1 ) ais Use the ad d (d s1 ) ais command to add DS1s to a list for the AIS Forwardin g feature. The DS1 enabled for AIS forwarding will be checked against th e DS1s defined in the list. Note: If no list is d efined, AIS will go to all the DS1s cros s-co nnected to that DS1. Synt ax: add {ds1-a ...

  • Carrier Access Network Device Axxius 800 - page 108

    5-8 Axxius 800 - Release 2 .2 CLI Comman ds add add (router) dhcp server option Use the ad d (route r) dhcp ser ver opti on command to a dd opti onal DHCP serv er attri butes t hat will b e advert ised ev ery time a DHCP cl ient d iscovery i s init iated. Thi s provisi oning tak es eff ect immedia tely and c an only be p erfor med when the DHCP ser ...

  • Carrier Access Network Device Axxius 800 - page 109

    Axxiu s 800 - R elease 2.2 5-9 CLI Comman ds add add (router) dns proxy Use the add ( router) dns pro xy command to enable DNS proxy an d add a remote DNS serve r address to the s pecified Router card. Synt ax: add {rtr_card-addr} dns proxy {"domain-name"} {ip-addr} {"profile-name"} Exampl e: add 2 dns proxy "Domain1" ...

  • Carrier Access Network Device Axxius 800 - page 110

    5-10 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router) snmp community Use the add (router) sn mp community command to add a SNMP community to an interface on the specified Router car d. Synt ax: add {rtr_card-addr} snmp community {read|write|both} {"community-name"} {ip-addr} Exampl e: add 2 snmp community both "commune" ...

  • Carrier Access Network Device Axxius 800 - page 111

    Axxiu s 800 - R elease 2.2 5-11 CLI Comman ds add add (router) snmp trap Use the add (r outer ) snm p trap command to specify a destin ation to send SNMP trap messages for the specified Router car d. Synt ax: add {rtr_card-addr} snmp trap {"community-name"} {ip-addr} {"profile-name"} Exampl e: add 3 snmp trap "commune" ...

  • Carrier Access Network Device Axxius 800 - page 112

    5-12 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router) st atic dns host Use the add (router) stat ic dns host command to add a static DNS host reco rd for resolving a domain name to an IP addr ess if the DNS se rver cannot pro vide the information. The DNS resolver will first attempt to resol ve the name by querying the configured DNS serve ...

  • Carrier Access Network Device Axxius 800 - page 113

    Axxiu s 800 - R elease 2.2 5-13 CLI Comman ds add add (router) uploaduser Use the add (rout er) uploa duser command to specify a host that is allowed to upload either the conf iguration or software files to the specified Router card. Synt ax: add {rtr_card-addr} uploaduser {code|config|both} {all|ip-addr} {"profile-name"} Exampl e: add 3 ...

  • Carrier Access Network Device Axxius 800 - page 114

    5-14 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router- lan) filter Use the add (router-lan) f ilter commands to add filters to the specified LAN interface. add (r outer-lan) filter address Use the add (router-lan) f ilter address command to add an address filter to the table of Layer 2 filters applied to the specified LAN interface. Synt ax ...

  • Carrier Access Network Device Axxius 800 - page 115

    Axxiu s 800 - R elease 2.2 5-15 CLI Comman ds add add (r outer-lan) filter custom Use the add (router-lan) f ilter custom command to add a custom f ilter to the table of Layer 2 filters applied to the specified LAN interface. Synt ax: add {rtr_lan-addr} filter custom {pkt-offset} {mask} {match} {"filter-name"} Exampl e: add 2:1 filter cus ...

  • Carrier Access Network Device Axxius 800 - page 116

    5-16 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add Ethernet Frame and IP Packet Format Ethernet 802.3 (raw) Frame - D atalin k Header 6 by tes 6 by tes 2 by tes 46 to 1500 b ytes 4 byt es Dest MAC Source MAC Length "FF F" f oll owed by t he da ta FCS ------ ------Datali nk (MAC) Header--------- - ----Data an d CRC (Frame Check Sequence)--- ...

  • Carrier Access Network Device Axxius 800 - page 117

    Axxiu s 800 - R elease 2.2 5-17 CLI Comman ds add add (r outer-lan) filter protoc ol Use the add (router-lan) f ilter protocol command to add a pr otocol filter to the table of Layer 2 filters applied to the specified LAN in terface. Note that you only need to iden tify either an Ethe rnet or IEEE value, but not both. The ot he r sh ould be en te r ...

  • Carrier Access Network Device Axxius 800 - page 118

    5-18 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router-lan) se condary ip address Use the add (r outer- lan) s econdary ip address command to add a secondary IP ad dress and subnet to the s pecified LAN interface. The Router wi ll then be capable of routing between the various s ubnets on the LAN interface or between any of the LAN s ubnets ...

  • Carrier Access Network Device Axxius 800 - page 119

    Axxiu s 800 - R elease 2.2 5-19 CLI Comman ds add add (router- lan) static Use the add (r outer- lan) stati c commands to add s tatic elements on the s pecified LAN interface. add (route r-lan) stati c ip address Use the add (r outer- lan) stati c ip ad dre ss command to add a static IP addr ess to the table of learned add resses on the specified L ...

  • Carrier Access Network Device Axxius 800 - page 120

    5-20 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router-l an) static ip networ k Use the add (router-lan) static ip network command to add a static IP n etwork (r oute) to the specified LAN interf ace. Synt ax: add {rtr_lan-addr} stati c ip network {ip-addr} { mask} {next-hop-ip-addr} [metric] Exampl e: add 3:1 static ip network 195.168.201.0 ...

  • Carrier Access Network Device Axxius 800 - page 121

    Axxiu s 800 - R elease 2.2 5-21 CLI Comman ds add add (route r-lan) stati c ipx network Use the add ( router-lan) stati c ipx network command to add a static IP X network (ro ute) to the specified L AN interface. Synt ax: add {tsr_lan-addr} static ipx network {network} {hops} {ticks} {next-hop-mac-addr} Exampl e: add 3:1 static ipx network 0x11 2 4 ...

  • Carrier Access Network Device Axxius 800 - page 122

    5-22 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router-l an) static mac addr ess Use the add (rou ter-lan) sta tic ma c address command to add a static MAC address to the table of learned addresses on the specified L AN interface. This command is typically used in bridg ing. Synt ax: add {rtr_lan-addr} static mac address {"network-name& ...

  • Carrier Access Network Device Axxius 800 - page 123

    Axxiu s 800 - R elease 2.2 5-23 CLI Comman ds add add (router-wan) firewall Use the add (router-wan) f irewall command to add a firewall rule to a WAN. Synt ax: add {rtr_card-addr} {"wan-name"} firewall {rule-number} {drop|pass} {incoming|inout|outgoing} {alarm|log|nolog} {service} {dest-ip-addr/bits} {src- ip-addr/bits} Exampl e: add 3 & ...

  • Carrier Access Network Device Axxius 800 - page 124

    5-24 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add {s ervi ce } {d est -ip -ad dr/b its} The destin ation IP Addr ess and n umber of signi ficant bits. The IP Address i s in the form of xxx.xxx .xxx.xx x, where xxx i s between 0-255. The ad dress "0.0 .0.0/0" matc hes any address. fin ger Dis play information about u sers ftp File Trans fe ...

  • Carrier Access Network Device Axxius 800 - page 125

    Axxiu s 800 - R elease 2.2 5-25 CLI Comman ds add {src-ip-addr/bits } The destination IP address and n umber of si gnificant bits. The address "0.0.0.0/0" matches any addres s. src-ip-addr Enter the IP Address o f the remote device or network that this rule will affect. If you enter the address of a remote device, this r ule will affect o ...

  • Carrier Access Network Device Axxius 800 - page 126

    5-26 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router-wan) gre network Use the add (router-wan) gre network command to add a "by net work" Gener ic Route Encapsulation (GR E) tunnel to a WAN. Synt ax: add {rtr_card-addr} {"wan-name"} gre network {ip-addr mask|ip-addr/bits} {metric} {remote-ip-addr} {"tunnel-name&quo ...

  • Carrier Access Network Device Axxius 800 - page 127

    Axxiu s 800 - R elease 2.2 5-27 CLI Comman ds add add (router-wan) nat bypass Use the add (ro uter-wan) nat bypass command to add subnets to the list of source add resses that will not be subject to NAT tran slation when passing through a NAT enabled WAN interface. Synt ax: add {rtr_card-addr} {"wan-name"} nat bypass {ip-addr mask|ip-addr ...

  • Carrier Access Network Device Axxius 800 - page 128

    5-28 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router-wan) static Use th e ad d (router-wa n) static commands to add static elements on the specified WAN interface. add (router- wan) sta tic ip a ddress Use the add (rou ter- wan) stat ic ip ad dress command to add a s tatic IP address to th e table of learned addres ses on the specified W A ...

  • Carrier Access Network Device Axxius 800 - page 129

    Axxiu s 800 - R elease 2.2 5-29 CLI Comman ds add add (route r-wan) static ip net work Use the add (r outer -wa n) st atic ip ne twor k command to add a static IP network (rou te) to the specified WAN interface. Synt ax: add {rtr_card-addr} {"wan-name"} static ip network {ip-addr} {mask} {metric} Exampl e: add 3 "LosAngeles" sta ...

  • Carrier Access Network Device Axxius 800 - page 130

    5-30 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router-wan) static ipx network Use the add (router- wan) stat ic ipx network command to add a static IPX networ k (route) to the specified WAN interface. Synt ax: add {rtr_card-addr} {"wan-name"} static ipx network {network} {hops} {ticks} Exampl e: add 3 "LosAngeles" static ...

  • Carrier Access Network Device Axxius 800 - page 131

    Axxiu s 800 - R elease 2.2 5-31 CLI Comman ds add add (route r-wan) static mac address Use the add (r outer- wan) st atic mac address command to ad d a static MAC address to the table of learned addres ses on the specifi ed WAN interface. This command is typically used i n bridging . Synt ax: add {rtr_card-addr} {"wan-name"} static mac ad ...

  • Carrier Access Network Device Axxius 800 - page 132

    5-32 Axxius 80 0 - Rele ase 2.2 CLI Comman ds add add (router-wan) static nat address Use the add (rout er-wan) stat ic nat ad dress command to add a static NAT bi-directional mapping to the specified WAN interface. This command will fail if NAT is not enabled, if the NAT addres s specified is in the NAT pool, or if the local or NAT address is not ...

  • Carrier Access Network Device Axxius 800 - page 133

    Axxiu s 800 - R elease 2.2 5-33 CLI Comman ds alarm s alarms Use the alarm s comman d to display the active alarms. The report can be filtered by address, category and/o r severity (major, minor , alert). The alarm s command alone, displays a full alar m report. Synt ax: alarms [slot|slot:port|slot:port:channel] [category] [severity] Exampl e: alar ...

  • Carrier Access Network Device Axxius 800 - page 134

    5-34 Axxius 80 0 - Rele ase 2.2 CLI Comman ds clear clear User the clear command to clear logs, performance data and tables. clea r (ds1) clea r (ds3) clea r key clea r log clea r (ocudp) per formance clea r (router) ip address table clea r (router) mac address t able clea r (router) performance ...

  • Carrier Access Network Device Axxius 800 - page 135

    Axxiu s 800 - R elease 2.2 5-35 CLI Comman ds clear clea r (ds1) Use the clear (ds1) com mand to clear specified DS1 per formance da ta. Synt ax: clear {ds1-addr} performance {setting} Exampl e: clear a:1 performance all Clears all perfo rmance data o n DS1 1 (po rt 1) on the DS1 C ontroller card. {ds1-addr} The Controller DS1 addresses are d iffer ...

  • Carrier Access Network Device Axxius 800 - page 136

    5-36 Axxius 80 0 - Rele ase 2.2 CLI Comman ds clear clea r (ds3) Use the clear (ds3) com mand to clear specified DS3 per formance data. Note this command app lies only whe n using a DS3 Contro ller card. Synt ax: clear {ds3-addr} performance {setting} Exampl e: clear a:1 performance all Clears all perfo rmance data o n DS3 1 (po rt 1) on the Contro ...

  • Carrier Access Network Device Axxius 800 - page 137

    Axxiu s 800 - R elease 2.2 5-37 CLI Comman ds clear clea r key Use the clear key command to remove a sp ecific keyed feat ure. To acqu ire a feature key code, contact Carrier Access Customer Service. Synt ax: clear [rtr_card-addr] key {"key-code"} Exampl e: clear key "q0B8yma2IsSL+1BarY0u" [rtr_c ard-add r] The slo t number ( 1- ...

  • Carrier Access Network Device Axxius 800 - page 138

    5-38 Axxius 80 0 - Rele ase 2.2 CLI Comman ds clear clear (router) ip address table Use the clear (router) ip address table com mand to flush the learned entries fr om the IP address tabl e for the specified inte rface from the specified Router car d. Synt ax: clear {rtr_card-addr} ip address table ["profile-name"] Exampl e: clear 2 ip ad ...

  • Carrier Access Network Device Axxius 800 - page 139

    Axxiu s 800 - R elease 2.2 5-39 CLI Comman ds clear clear (router) performance Use the clear (router) performance command to clear the runtime statistics that are displayed by th e status ( router) performance co mmand. This co mmand ta kes effe ct immediately. Synt ax: clear {rtr_card-addr} performance {all|lan|wan} Exampl e: clear 4 performance a ...

  • Carrier Access Network Device Axxius 800 - page 140

    5-40 Axxius 80 0 - Rele ase 2.2 CLI Comman ds connect connect Use the connect command to create two-way connections between any DS0 channels of the service or controller cards. Synt ax: connect {slot:port|slot:port:channel} {slot:port|slot:port:channel} Use the disconnect command to delete connections. Exampl e: connect A:2:1-24 3:1 Connect s all 2 ...

  • Carrier Access Network Device Axxius 800 - page 141

    Axxiu s 800 - R elease 2.2 5-41 CLI Comman ds connect connec t (router-trunk) (t 1) Use the connect (router-t runk) (t1) command to create two-way connections between the Router port trunk connection s and any DS 0 channels of the servi ce card or C ontroller . Synt ax: connect {rtr_trunk-addr} {slot:port|slot:port:channel} Use the disconnect comma ...

  • Carrier Access Network Device Axxius 800 - page 142

    5-42 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delete Use the delete command to r emove users , interfaces, services o r profiles. See the following sectio ns for detailed informatio n on the following delet e comman ds delete (ds1) ais delete (r outer) dhcp ser ver option delete (r outer) dns proxy delete (router) remote delete (r outer) sn ...

  • Carrier Access Network Device Axxius 800 - page 143

    Axxiu s 800 - R elease 2.2 5-43 CLI Comman ds delete delete ( ds1) ais Use the delete (ds1 ) ais command to delete DS1s from the AIS DS1 list. The DS1 that is AIS enabled will be checked against the DS1 s defined in the list. Note: If no DS1s are defi ned, and AIS is enabled , the default will b e all the DS1s in the system. If all DS1 s are remove ...

  • Carrier Access Network Device Axxius 800 - page 144

    5-44 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delete (router) dhc p server option Use the delete ( router) dhcp server option command to delete optional DHCP server attributes that will be advertised every time a DHCP clien t discovery is in itiated. This provisio ning takes effect immediately and can only be performed when the DHCP server ...

  • Carrier Access Network Device Axxius 800 - page 145

    Axxiu s 800 - R elease 2.2 5-45 CLI Comman ds delete delete (router) remote Use the delete (router) remot e command to delete a remote WA N profile from the WAN profile table on th e specified Router card. Synt ax: delete {rtr_card-addr} remote {"profile-name"} Exampl e: delete 6 remote "Texas" The example will delete a remote W ...

  • Carrier Access Network Device Axxius 800 - page 146

    5-46 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delete (router) snmp trap Use the delete (router) s nmp trap command to delete a trap destinatio n from the specified Router card. Synt ax: delete {rtr_card-addr} snmp trap {"community-name"} {ip-addr} Exampl e: delete 2 snmp trap "commune" 192.168.100.245 The example will d ...

  • Carrier Access Network Device Axxius 800 - page 147

    Axxiu s 800 - R elease 2.2 5-47 CLI Comman ds delete delete (router) uploaduser Use the delete (router) uploadus er command to remove an existing host th at is allowed to upload either the configuration or softwa re files to th e specified Router card. Synt ax: delete {rtr_card-addr} uploaduser {all|ip-addr} {"profile-name"} Exampl e: del ...

  • Carrier Access Network Device Axxius 800 - page 148

    5-48 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delet e (rout er-la n) fi lter Use the delete (router-lan) f ilter command to delete a sin gle filter rule from the tabl e of Layer 2 filters applied to the specified LAN interf ace. Synt ax: delete {rtr_lan-addr} filter {address|custom|protocol|all} {"filter-name"} Exampl e: delete 2: ...

  • Carrier Access Network Device Axxius 800 - page 149

    Axxiu s 800 - R elease 2.2 5-49 CLI Comman ds delete delete (router-lan) se condary ip address Use the delete (router-lan) secondary ip address command to delete a secondary IP add ress and subn et to the specified LAN interf ace. Synt ax: delete {rtr_lan-addr} secondary ip address {ip-addr [mask]|ip-addr/bits} Exampl e: delete 4:1 secondary ip add ...

  • Carrier Access Network Device Axxius 800 - page 150

    5-50 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delete (rout er-lan ) static Use the de lete (router-la n) static commands to delete s tatic elements from the specified LAN interface. delete ( router-lan) static ip address Use the d elete (rou ter-lan) st atic ip addres s command to delete a st atic IP address entry from the specified LAN in ...

  • Carrier Access Network Device Axxius 800 - page 151

    Axxiu s 800 - R elease 2.2 5-51 CLI Comman ds delete delete ( router-lan) static ip networ k Use the de let e (ro ute r- lan) sta tic ip ne two rk command to delet e a static IP net work fr om the specified LAN interf ace. Synt ax: delete {rtr_lan-addr} static ip network {ip-addr} {mask} {next-hop-ip-addr} Exampl e: delete 3:1 static ip network 195 ...

  • Carrier Access Network Device Axxius 800 - page 152

    5-52 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delete ( router-lan) static ipx network Use the delete (router-lan) static ipx network command to delete a static IPX network (route) to the specified LAN interf ace. Synt ax: delete {rtr_lan-addr} static ipx network {network} {next-hop-ip-addr} Exampl e: delete 3:1 static ipx network 0x11 0x00e ...

  • Carrier Access Network Device Axxius 800 - page 153

    Axxiu s 800 - R elease 2.2 5-53 CLI Comman ds delete delete ( router-lan) s t atic ma c address Use the delete (router-lan) static mac address command to delete a static MAC address entry to the specified LAN interface. Synt ax: delete {rtr_lan-addr} static mac address {mac-addr} Exampl e: delete 3:1 static mac address 0x00e09700e9cd The example wi ...

  • Carrier Access Network Device Axxius 800 - page 154

    5-54 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delete (router-wan) gre network Use the delete (router-wa n) gre network co mmand to d elete a " by netw ork" GRE t unnel to a WAN . Synt ax: delete {rtr_card-addr} {"wan-name"} gre network {ip-addr mask|ip-addr/bits} Exampl e: delete 3 "LosAngeles" gre network 10.0 ...

  • Carrier Access Network Device Axxius 800 - page 155

    Axxiu s 800 - R elease 2.2 5-55 CLI Comman ds delete delete (rout er-wan ) static Use the delete (router-wan) static commands to delete a static element fr om the WAN interface. delete ( router-wa n) static ip addr ess Use the delete (router-wan) static ip address command to delete a st atic IP address on the specified WAN interface. Synt ax: delet ...

  • Carrier Access Network Device Axxius 800 - page 156

    5-56 Axxius 80 0 - Rele ase 2.2 CLI Comman ds del ete delete ( router-wa n) static ip net work Use the delete (router-wan) static ip networ k command to delete a static IP network from the specified WAN interface. Synt ax: delete {rtr_card-addr} {"wan-name"} static ip network {ip-addr} {mask} Exampl e: delete 3 "LosAngeles" stat ...

  • Carrier Access Network Device Axxius 800 - page 157

    Axxiu s 800 - R elease 2.2 5-57 CLI Comman ds delete delete ( router-wa n) static mac address Use the delete (router-wan) static mac addres s command to delete a static MAC add ress entry from th e specified WAN interface. Synt ax: delete {rtr_card-addr} {"wan-name"} static mac address {mac-addr} Exampl e: delete 3 "LosAngeles" ...

  • Carrier Access Network Device Axxius 800 - page 158

    5-58 Axxius 80 0 - Rele ase 2.2 CLI Comman ds discon nect delete user The delete user command will remover a user created by the add user command. Synt ax: delete user {"user-name"} Exampl e: delete user "jsmith" {"user -nam e"} The user-n ame is an existing user I D in the system. T his name must be en closed in quote ...

  • Carrier Access Network Device Axxius 800 - page 159

    Axxiu s 800 - R elease 2.2 5-59 CLI Comman ds exit exit Use the exit com mand to log out o f the Command Line I nterface (CLI). Synt ax: exit Exampl e: > exit Logging out of Carrier Access - Axxius Product Line instal l install (s lot) router The Axxius 800 Controller card au tomatically cr eates a b ackup of the con figuration of an y router ca ...

  • Carrier Access Network Device Axxius 800 - page 160

    5-60 Axxius 80 0 - Rele ase 2.2 CLI Comman ds load load W ARNING! B EFORE LOADING A DOWN - LEVEL OF R OUTER CODE TO AN A DIT , SAVE THE CONFIGURATI ON TO A FILE . C ONFIGURATION MAY BE RESET TO THE DEF AULT SETTING AND CURRE NT CONFIGURATI ON LOST . load tftp The lo ad t ft p command will downlo ad software via TFTP to the Controller or to th e TSR ...

  • Carrier Access Network Device Axxius 800 - page 161

    Axxiu s 800 - R elease 2.2 5-61 CLI Comman ds load load x modem Use the loa d xmodem comman d to down load softwa re via Xmod em. This c ommand is onl y available with an RS-232 connectio n. If you are using Telnet, see load tftp command. Synt ax: load {ctrlr-id} xmodem Exampl e: load a2 xmodem The example initiates an modem transfer to th e Contro ...

  • Carrier Access Network Device Axxius 800 - page 162

    5-62 Axxius 80 0 - Rele ase 2.2 CLI Comman ds log log log Displays the event log. W here the optional [slo t:port:ch annel], [categor y], and [severity] are variabl es used to narrow do wn the log di splay ed. The log command wit hout any op tions displays a full log. Synt ax: log [slot|slot:port] [category] [severity] Exampl e: log a:1 Time Date S ...

  • Carrier Access Network Device Axxius 800 - page 163

    Axxiu s 800 - R elease 2.2 5-63 CLI Comman ds ping ping ping Use the ping command to perform a ping test f rom the Controller and repor t the result. If the host is reachable, each individual response will be di splayed. Synt ax: ping {ip-addr} [count] [length] Exampl e: ping 192.168.3.196 7 5000 Pinging 192.168.3.196 with 5000 bytes of data: Reply ...

  • Carrier Access Network Device Axxius 800 - page 164

    5-64 Axxius 80 0 - Rele ase 2.2 CLI Comman ds prin t print Use the print command to display the help information or print th e configuration file. Synt ax: print {config|help} print config Print the configuration file for the Axx ius 800. The operator may then save this to a text file, which can be sent to another Axxius to autom atically configure ...

  • Carrier Access Network Device Axxius 800 - page 165

    Axxiu s 800 - R elease 2.2 5-65 CLI Comman ds rena me (router ) print help Print the complete help file to the screen. Synt ax: print help Exampl e: print help This example would print the entir e help text, which can be scrolled though with Ente r or Spacebar . rename (rou ter) Use the rename ( router) comm and to chang e the na me of a local LAN ...

  • Carrier Access Network Device Axxius 800 - page 166

    5-66 Axxius 80 0 - Rele ase 2.2 CLI Comman ds rese t reset rese t (contro ller ) Use the res et (controller) co mmand to r eboot the sy stem. Reset alone will reb oot the en tire system . Synt ax: reset [ctrlr-addr|active|standby] Exampl e: reset a1 Will reset th e controller in the controller slo t 1. Do you really want to reset (y/n)? y **** S ys ...

  • Carrier Access Network Device Axxius 800 - page 167

    Axxiu s 800 - R elease 2.2 5-67 CLI Comman ds resto re reset (r outer) coldboot Use the reset (router) co ldboot command t o reboot the Router. This will reboot includin g a power cycle to the R outer card. Synt ax: reset {rtr_card-addr} coldboot Exampl e: > reset 2 coldboot OK The exampl e will coldboot the Router card in slot 2. {rtr _card -ad ...

  • Carrier Access Network Device Axxius 800 - page 168

    5-68 Axxius 80 0 - Rele ase 2.2 CLI Comman ds rtrping rtrping Use the rtrping command to request that the Router per form a ping tes t and report the r esult. Synt ax: rtrping {rtr_card-addr} {dest-ip-addr|"domain-name"} [count] [count length] [count length source-ip-addr] Exampl e: rtrping 4 192.168.100.97 > rtrping 4 192.168.10 0.97 ...

  • Carrier Access Network Device Axxius 800 - page 169

    Axxiu s 800 - R elease 2.2 5-69 CLI Comman ds set set set alarms set (ocudp ) baud se t auto exi t set (ocu dp) loop bac k set (b ri) set ( ocudp) l oopdetect se t (bri ) mo de set (ocu dp) mve c set (b ri) pmsyn c set ( ocudp) s econdary set cc label set ( ocudp) s elftest set clock set (ocudp ) up/down set clock (1 and 2) set (rout er) au tologou ...

  • Carrier Access Network Device Axxius 800 - page 170

    5-70 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set se t (ro uter -lan ) ip ad dre ss set (ro uter- wa n) n at se t (rou ter -lan ) ip x net wo rk set (ro uter- wa n) o ther se t (ro uter -l an) ph y set (ro ute r-wa n) p pp se t (ro uter -lan ) ri p set (ro uter- wa n) r ip se t (ro uter -lan ) st p set (ro uter- wa n) s tp se t (ro uter -l an) up / ...

  • Carrier Access Network Device Axxius 800 - page 171

    Axxiu s 800 - R elease 2.2 5-71 CLI Comman ds set set al arms Use the set alar ms to manually set an alarm state for testing. Synt ax: set alarms {critical|major|minor} {off|on} Exampl e: set alarms critical on The example set th e alarm state of critical on. {ciritica l|major|mi nor} {off|on} set autoe xit Use the set au toex it to set the autoexi ...

  • Carrier Access Network Device Axxius 800 - page 172

    5-72 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set (bri) Use the set (br i) command to setup the I SDN BRI card. Synt ax: set {bri-addr} {day|hour} {es|ses} {value} Exampl e: set 3:4 threshold day ses 30 To set t he daily thr eshold t o 30 Severel y Errored Seco nds on p ort 4 of a BRI card in slot 3. {bri -ad dr} The {slot:port} addres s of the ...

  • Carrier Access Network Device Axxius 800 - page 173

    Axxiu s 800 - R elease 2.2 5-73 CLI Comman ds set set (bri) mode Use the set (b ri) mod e command to set the mod e for the ISDN BRI Service. Synt ax: set {bri_card-addr} mode {setting} Exampl e: set 4 mode nt3ds0 To set the BRI card in slot 4 to use 3 DS0 LUNT {bri_ca rd- addr} The slot num ber (1-8) of the Adit chassis that contains the BRI card . ...

  • Carrier Access Network Device Axxius 800 - page 174

    5-74 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set ccl abel Use the set cclable command to s et a user defined cro ss-connect label. Synt ax: set cclabel {addr} {"label"} Exampl e: set cclabel a:1:1 "Idle Ch" The example will se t a user connect label "Id le Ch" on the DS0 a:1:1 . {addr} {label} The user d efined la ...

  • Carrier Access Network Device Axxius 800 - page 175

    Axxiu s 800 - R elease 2.2 5-75 CLI Comman ds set set clock ( 1 and 2) Use the set clock (1 an d 2) command to set the master transmit clock. The primary master clock source may be used to clock each DS1 transmitter. Th e clock circuit automatically switches to the secondar y clock source if the p rimary clock fails. Synt ax: set {clock1|clock2} {s ...

  • Carrier Access Network Device Axxius 800 - page 176

    5-76 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set (ds0) Use the set (ds 0) command to setup one or all DS0s in a DS1. The command specifies DS0 or range o f DS0s, and the setti ng to app ly. set(ds 0) signal Use the set (d s0) sign al comman d to setup on e or all DS0s in a DS1 signal. Synt ax: set {ds0-addr} signal {emdw|emi|emicpd|emw|gs|ls} ...

  • Carrier Access Network Device Axxius 800 - page 177

    Axxiu s 800 - R elease 2.2 5-77 CLI Comman ds set set(ds 0) type Use the set (d s0) type co mmand to s etup one o r all DS0s in a DS1 signal t ype. Synt ax: set {ds0-addr} type {data|voice} Exampl e: set 3:1:1-4 type voice To set th e traffic type to voice o n channels 1-4 on po rt 1 of s lot 3 on a service card. {ds0-addr} The Controller DS0 addre ...

  • Carrier Access Network Device Axxius 800 - page 178

    5-78 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set (ds1) Use the set (d s1) command to set up DS1 interfaces. The command specifies a ra nge of interfaces and the setting to apply. Synt ax: set {ds1-addr} {setting} Exampl e: set a:1 framing esf To set DS 1 1 (p ort 1) o n a DS1 Contr oller to u se ESF f raming. {ds1-addr} The Controller DS1 addr ...

  • Carrier Access Network Device Axxius 800 - page 179

    Axxiu s 800 - R elease 2.2 5-79 CLI Comman ds set id Set the DS1 circuit identifi cation name. This is th e same as d sx1Circuit Identifier from DS1 MIB t ransmission vendor ’s identificati on. String text must be enclo sed in quotes . Example : set {ds1 -addr} id {"id-n ame"} {id-name} = transmissi on vendor’ s ID, up to 30 charact e ...

  • Carrier Access Network Device Axxius 800 - page 180

    5-80 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set threshol d Set defa ult t hresho lds for a DS1. Defaul ts for a ll are 0. day Set threshold for a daily in terval bes Burst y errore d seconds range: 0 - 86400 css Controll ed slip seconds r ange: 0 - 86400 dm Degraded minutes ran ge: 0 - 1440 es Error ed seconds rang e: 0 - 86400 lcv Line code vi o ...

  • Carrier Access Network Device Axxius 800 - page 181

    Axxiu s 800 - R elease 2.2 5-81 CLI Comman ds set set (ds1 card) Use the set (d s1 c ard) commands to conf igure DS1 card types. These co mmands apply to the Quad DS1/E1 (hard ened) and Quad DS1 ADPCM (hardened) service cards. set (ds1 card) s pantype Use the se t (d s1 card ) sp ant yp e command to set the span typ e (T1 or E1) on the DS1 type car ...

  • Carrier Access Network Device Axxius 800 - page 182

    5-82 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set (ds1 card) a dpcm map Use the set (d s1 car d) a dpcm ma p command to set vo ice compression map on the Quad DS1 ADPCM card. Synt ax: set {adpcm_card-addr} adpcm {none|map1|map2|map3} Exampl e: set 5 adpcm map1 {adpc m_ca rd-ad dr} - The slot number (1-6) th at contains the Quad DS1 ADPCM card. ...

  • Carrier Access Network Device Axxius 800 - page 183

    Axxiu s 800 - R elease 2.2 5-83 CLI Comman ds set set (ds3) Use the set (d s3) command to set up DS3 interfaces. The command specifies a ra nge of interfaces and the setting to apply. Synt ax: set {ds3-addr} {setting} Exampl e: set a:1 framing m23 To set DS3 1 (port 1) on a DS3 Controller ( slot A) to use M23 framing. {ds3-addr} DS3 address in the ...

  • Carrier Access Network Device Axxius 800 - page 184

    5-84 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set frame Set the DS3 frame PMDL ID st ring Command synt ax: s et {ds 3-addr} frame {"string"} {"string"} = transmis sion ven dor’s identificat ion, up to 10 char acters, enclosed in quotes . framing Set the DS3 framing type cbit To C-bit framing m23 To M23 framin g genn um Set the ...

  • Carrier Access Network Device Axxius 800 - page 185

    Axxiu s 800 - R elease 2.2 5-85 CLI Comman ds set reversion Set pro tection r eversion on the D S3 off Dis able protect ion revers ion of lo opback r equests on En able prot ection rever sion of loopback r equests threshold Set defe ct thr esholds f or a DS3. Defaul ts for al l are 0. day Set threshold for a daily in terval ccv C-b it cod e vi olat ...

  • Carrier Access Network Device Axxius 800 - page 186

    5-86 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set ethe rnet ip addres s Use the set ethernet ip address command to set the E thernet address for the Axxius 800. Synt ax: set ethernet ip address {ip-addr} [mask] Exampl e: set ethernet ip address 172.26.100.25 255.255.255.0 {ip-addr } Set the I P address for the Axxi us 800, u sing the form xxx.x ...

  • Carrier Access Network Device Axxius 800 - page 187

    Axxiu s 800 - R elease 2.2 5-87 CLI Comman ds set set (f xo) Use the set (f xo) command to s etup one or all of the voice channels of a n FXO card. The command specifies the list of voice channels within that card , and the setting to apply. Synt ax: set {fxo-addr} {setting} Exampl e: set 2:1 signal ls Set the FXO on slot 2, port 1 to sign aling ty ...

  • Carrier Access Network Device Axxius 800 - page 188

    5-88 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set (f xsPS or fxs PSM ) Use the set ( fxsPS or fxsPSM) command to setup voice channels of an Single Channel POTS card (FXS PS) or th e POTS card with modem (F XS PSM). The command s pecifies the list of voice channels, and the setting to apply. Synt ax: set {fxsPS-addr|fxsPSM-addr} {setting} Exampl ...

  • Carrier Access Network Device Axxius 800 - page 189

    Axxiu s 800 - R elease 2.2 5-89 CLI Comman ds set set idle Use the set idle command to se t the system-wide idle code s ent on DS0s. Synt ax: set idle {pattern} Exampl e: set idle 0xff {patte rn} A hexadecimal number with a range from 0x00 to 0xff. This number mus t be preceeded by 0x. set ip gate way Use the set ip gateway command to s et the I P ...

  • Carrier Access Network Device Axxius 800 - page 190

    5-90 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set ipds0 Use the set ipds0 command to setup t he DS0 manag ement channel . Note: the DS0 selected as the DS0 management chann el can only r eside on the Co ntroller T1. Synt ax: set ipds0 {setting} [ds0-addr|ip-addr] Exampl e: set ipds0 assign a:1:24 The exampl e sets the DS 0 management channel to ...

  • Carrier Access Network Device Axxius 800 - page 191

    Axxiu s 800 - R elease 2.2 5-91 CLI Comman ds set set key Use the set key command to enable a specific keyed f eature. To acquire a feature key code, contact Carrier Access Cust omer Service. Curr ently, keyed features (if available) can be enabled on a Con troller or a Router. Synt ax: set [rtr_card-addr] key {"key-code"} Exampl e: set 4 ...

  • Carrier Access Network Device Axxius 800 - page 192

    5-92 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set login support Use the set login support command to enable or d isable the internal login accounts for Carrier Access Suppo rt personnel for th e Controller and Rou ter cards. Synt ax: set login support {disable|enable} Exampl e: set login support disable The example will p rohibit logins via Car ...

  • Carrier Access Network Device Axxius 800 - page 193

    Axxiu s 800 - R elease 2.2 5-93 CLI Comman ds set set lsprot ect en able /dis able Use the set lsp rotect enable/disable comman d to set the global enable or disable the Low Speed Protection option s on the system. Synt ax: set lsprotect {disable|enable} Exampl e: set lsprotect disable {disable|enable} set lsprotect manual Use the set l sprotect ma ...

  • Carrier Access Network Device Axxius 800 - page 194

    5-94 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set lsprotec t nonrevertive Use the set lsprotect nonrevertive command to set low speed prot ected port(s ) to non-re vertive mode. When a port is in no n-revertive mode and a failu re occurs th e port is switched to the protection port, and will remain ther e until manually res et. However, if the ...

  • Carrier Access Network Device Axxius 800 - page 195

    Axxiu s 800 - R elease 2.2 5-95 CLI Comman ds set set lsprotect remove Use the set lsprotect remove co mmand to remove port from protect ed mode. Synt ax: set lsprotect {slot:port} remove Exampl e: set lsprotect 5:2 remove Do you really want to do this? y *-Protected port(s) no t removed since they were not pre viously assigned. Exampl e: set lspro ...

  • Carrier Access Network Device Axxius 800 - page 196

    5-96 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set lsprotect revertive Use the set lsprotect revertive command to s et low speed protected port(s ) to revertive mode. When a port is set to rever tive mode and a failure occurs the port is swit ched to the protection port. After 5 minutes, with no failures, the port reverts b ack. If there are 3 r ...

  • Carrier Access Network Device Axxius 800 - page 197

    Axxiu s 800 - R elease 2.2 5-97 CLI Comman ds set set (ocudp) baud Use the set (ocu dp ) bau d command to co nfigure the Baud Rate for OCU-DP por ts. Synt ax: set {ocudp-addr} baud {rate}[sw56|sw56cp] Exampl e: set 3:2 baud 2400 Set the b aud rate on port 2 to 240 0, on the O CU-DP card in s lot 3. {ocudp-addr } The {slot:port} addres s of the OCU- ...

  • Carrier Access Network Device Axxius 800 - page 198

    5-98 Axxius 80 0 - Rele ase 2.2 CLI Comman ds set set (ocudp) loopback Use the set (ocu dp ) loopback command to manually se t OCU/CSU loopback test s. Synt ax: set {ocudp-addr} loopback {csu|ocu} {loopdown|loopup} Exampl e: set 3:2 loopback csu loopdown {ocudp-addr } The {slot:port} addres s of the OCU-DP card yo u want to apply the changes to. {c ...

  • Carrier Access Network Device Axxius 800 - page 199

    Axxiu s 800 - R elease 2.2 5-99 CLI Comman ds set set (ocudp) loopdetect Use the set (ocu dp ) loopdetect to conf igure the OCU n on-latch ing/lat ching l oopback code detection. Synt ax: set {ocudp-addr} loopdetect {csu|dsu|ocu} {llb|nllb} {disable|enable} Exampl e: set 3:2 loopdetect csu llb enable {ocudp-addr } The {slot:port} address of the OCU ...

  • Carrier Access Network Device Axxius 800 - page 200

    5-10 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (ocudp) mvec Use the set (ocu dp ) mvec to set Majority Vote Error Correction (MVEC). Synt ax: set {ocudp-addr} mvec {disable|enable} Exampl e: set 3:2 mvec enable {ocudp-addr } The {slot:port} addres s of the OCU-DP card yo u want to apply the changes to. {disable|enable} set (ocudp) secondar ...

  • Carrier Access Network Device Axxius 800 - page 201

    Axxiu s 800 - R elease 2.2 5-10 1 CLI Comman ds set set (ocudp) selftest Use the set (o cudp) selftest to initiate the OC U-DP card to per form a self test . This reque st will display a m essage to wait 8 seconds bef ore requesting s elftest status w ith the statu s command. Synt ax: set {ocudp-addr} selftest Exampl e: set 3:2 selftest {ocudp-addr ...

  • Carrier Access Network Device Axxius 800 - page 202

    5-10 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) autologout Use the set (router) autologout command to set the perio d of time of inactivity after which the user will be automatically logged-out of a Telnet session. Synt ax: set {rtr_card-addr} autologout {minutes} Exampl e: set 3 autologout 0 The exampl e will disable the auto-logo ...

  • Carrier Access Network Device Axxius 800 - page 203

    Axxiu s 800 - R elease 2.2 5-10 3 CLI Comman ds set set (router) dhcp Use the set ( router) dhcp commands to config ure the DHCP functions. set (rout er) dhcp di sable Use the set (router) dhcp disable command to d isable both DHCP server an d DHCP relay functionality for the specified Router card . Synt ax: set {rtr_card-addr} dhcp disable Exampl ...

  • Carrier Access Network Device Axxius 800 - page 204

    5-10 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er) dhcp se rver dnsser ver Use the set (router) dhcp server dnsserver command to set the IP address of up to 4 DNS servers that the DHCP server will inform the clients of . Synt ax: set {rtr_card-addr} dhcp server dnsserver {number} {ip-addr} Exampl e: set 5 dhcp server dnsserver 4 122. ...

  • Carrier Access Network Device Axxius 800 - page 205

    Axxiu s 800 - R elease 2.2 5-10 5 CLI Comman ds set set (rout er) dhcp se rver dur ation Use the set (router) dhcp server duration command to s et the lease duratio n that the DHCP server appl ies to client assignments. Synt ax: set {rtr_card-addr} dhcp server duration {hours:minutes} Exampl e: set 5 dhcp server duration 3:45 The example set the le ...

  • Carrier Access Network Device Axxius 800 - page 206

    5-10 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) dhcp server netbios nodetype Use the set (router) dhcp server netbios nodetype co mmand to set the NetBIOS n ode type (s ee RFC 10 01/1002) that the DHCP server p rovides to clients . Synt ax: set {rtr_card-addr} dhcp server netbios nodetype {type-number} Exampl e: set 5 dhcp server n ...

  • Carrier Access Network Device Axxius 800 - page 207

    Axxiu s 800 - R elease 2.2 5-10 7 CLI Comman ds set set (rout er) dhcp se rver st artaddr Use the set (router) dhcp server st artaddr command to enable the DHCP serv er on the specified Router card . Synt ax: set {rtr_card-addr} dhcp server startaddr {ip-addr} {count} Exampl e: set 4 dhcp server startaddr 134.200.3.1 254 The example will set the T ...

  • Carrier Access Network Device Axxius 800 - page 208

    5-10 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) dns Use the set ( router) dns commands to set Domain Name Server (DNS) options . set (rout er) dns domai n Use the set (r ou ter) dns dom ai n command to set the default domain that the DNS resolver will add to any name queries that are not fully qualified. Synt ax: set {rtr_card-addr ...

  • Carrier Access Network Device Axxius 800 - page 209

    Axxiu s 800 - R elease 2.2 5-10 9 CLI Comman ds set set (rout er) dns r esolver Use the set (router) dns resolver command to enab le/disable use of DNS resolver to conver t domain names to IP addresses . The DNS server address must be set bef ore the DNS resolver can be enabled. Synt ax: set {rtr_card-addr} dns resolver {disable|enable} Exampl e: s ...

  • Carrier Access Network Device Axxius 800 - page 210

    5-11 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) enhanced security Use the set (router) enhanced security command to enable or dis a ble enhanced log in security on the TSR. When enabled the user will not receive any login prompt or other output until the security password is typed. The security password is set via the set (rout er) ...

  • Carrier Access Network Device Axxius 800 - page 211

    Axxiu s 800 - R elease 2.2 5-11 1 CLI Comman ds set set (router) lmi poll Use the set (router) lmi poll command to specify the Local Man agement Interf ace (LMI) for the specified Router card. Synt ax: set {rtr_card-addr} lmi poll {counter|interval} {value} Exampl e: set 5 lmi poll counter 15 The exampl e will configure L MI poll coun t to 15, on t ...

  • Carrier Access Network Device Axxius 800 - page 212

    5-11 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) login prompt Use the set ( router) lo gin prompt command to enable/disable the login prompt on the specified Router card . Synt ax: set {rtr_card-addr} login prompt {disable|enable} Exampl e: set 1 login prompt enable The example will set the R outer card to require a login w ith Teln ...

  • Carrier Access Network Device Axxius 800 - page 213

    Axxiu s 800 - R elease 2.2 5-11 3 CLI Comman ds set set (router) ntp poll Use the set (router) ntp po ll command to specify p olling of the NTP s erver every d efined number of seconds. No te: not operational in this releas e. Synt ax: set {rtr_card-addr} ntp poll {seconds} Exampl e: set 1 ntp poll 120 The example will Poll th e Network Time Protoc ...

  • Carrier Access Network Device Axxius 800 - page 214

    5-11 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) ntp timezone Use the set (router) ntp timezone command to specify the timezone offset relative to GMT for this TSR. No te: not oper atio nal i n th is rele ase . Synt ax: set {rtr_card-addr} ntp timezone {hour-offset} [minute-offset] Exampl e: set 1 ntp timezone -5 The example will sp ...

  • Carrier Access Network Device Axxius 800 - page 215

    Axxiu s 800 - R elease 2.2 5-11 5 CLI Comman ds set set (router) port Use the set (router) port command to s et port characteris tics on a Terminal Server Ro uter (TSR) card . set (rout er) port baudrate Use the set ( router) port baudrate command to set the baud rate on a TSR port. Synt ax: set {tsr_card-addr} port {port-number} baudrate {value} E ...

  • Carrier Access Network Device Axxius 800 - page 216

    5-11 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er) port databits Use the set ( router) port databit s command to set the data bits on a TSR port. Synt ax: set {tsr_card-addr} port {port-number} databits {5|6|7|8} Exampl e: set 5 port 2 databits 6 The example will set the data bits to 6 on the port 2 on th e TSR card in slot 5. {tsr_c ...

  • Carrier Access Network Device Axxius 800 - page 217

    Axxiu s 800 - R elease 2.2 5-11 7 CLI Comman ds set set (rout er) port flowcontrol Use the set (router) port flowcontrol com mand to set the f low control on a TSR port. This command con trols the transfer of messages or char acters between two points in a data network to prev ent congestion, or loss of data when the receiving dev ice’s buffer be ...

  • Carrier Access Network Device Axxius 800 - page 218

    5-11 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er) port inacti vity ti mer Use the set ( router) port inac tivity ti mer command to set the inactivity tim eout for a RS-232 sessio n. This setting can be issued when the card is physically strapped f or Ethernet, bus has no effect. When this timer is set, the socket will be reset wh en ...

  • Carrier Access Network Device Axxius 800 - page 219

    Axxiu s 800 - R elease 2.2 5-11 9 CLI Comman ds set set (rout er) port name Use the set ( router) port name command to set d efine name f or a TSR port. Synt ax: set {tsr_card-addr} port {port-number} name {"name"} Exampl e: set 5 port 2 name "portname" The example will s et a port name on the s econd port on the TSR card in slo ...

  • Carrier Access Network Device Axxius 800 - page 220

    5-12 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er) port passive Use the set ( router) port passive com ma nd to se t th e TS R p ort to p ass ive. T his co mman d will terminate any active telnet connection on this in terface and will reinitialize its associated TCP socket. Synt ax: set {tsr_card-addr} port {port-number} passive Exam ...

  • Carrier Access Network Device Axxius 800 - page 221

    Axxiu s 800 - R elease 2.2 5-12 1 CLI Comman ds set set (rout er) port prompt Use the set (router) port prompt command to set the authentication pro mpt on a TSR port. Synt ax: set {tsr_card-addr} port {port-number} prompt {disable|enable} Exampl e: set 1 port 2 prompt enable This command will enable the authentication prompt f or port 2 on the TSR ...

  • Carrier Access Network Device Axxius 800 - page 222

    5-12 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er) port stopbits Use the set (router) port stop bit s command to set the numb er of stop bits on a TSR port. The stop bit is an interval at the end of each Asynch ronous Character that allows the receiving co mputer to paus e before the star t of the next c haracter. Synt ax: set {tsr_c ...

  • Carrier Access Network Device Axxius 800 - page 223

    Axxiu s 800 - R elease 2.2 5-12 3 CLI Comman ds set set (rout er) port tbos map displ ay Use the set ( router) port tbos map di splay command to set a TBOS (Telemetry Byte Oriented Serial) display map value for o ne of the eight TBOS display availab le for monitoring equi pment. This setting can b e issu ed when the card is physically strap ped for ...

  • Carrier Access Network Device Axxius 800 - page 224

    5-12 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er) port type Use the set ( router) port type co mmand to set the appli cation bei ng used fo r a RS-232 (serial) port. This setting can be issu ed when the card is physically strapped for Ethernet, but has no effect. This command applies to the TSR only. Synt ax: set {tsr_card-addr} por ...

  • Carrier Access Network Device Axxius 800 - page 225

    Axxiu s 800 - R elease 2.2 5-12 5 CLI Comman ds set set (router) ppp auth Use the set ( router) pp p auth command to confi gure the PP P (Poi nt-to-Po int Prot ocol) authentication on th e specified Router card. set (router) ppp auth byremote protocol Synt ax: set {rtr_card-addr} ppp auth byremote protocol {chap|none|pap} Exampl e: set 5 ppp auth b ...

  • Carrier Access Network Device Axxius 800 - page 226

    5-12 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) ppp auth byremote user Synt ax: set {rtr_card-addr} ppp auth byremote user {profilename|"protocol-name"} Exampl e: set 5 ppp auth byremote user profilename The example wil l set the PPP authent ication user nam e for the Router in slot 5 to equal the profile nam e. Note: A s ...

  • Carrier Access Network Device Axxius 800 - page 227

    Axxiu s 800 - R elease 2.2 5-12 7 CLI Comman ds set set (router) ppp security Use the set (router) ppp security command to set up the local external security se rver, that the Router will use to authen ticate remote PPP devices. set (rout er) ppp sec urity address Synt ax: set {rtr_card-addr} ppp security address {ip-addr} Exampl e: set 5 ppp secur ...

  • Carrier Access Network Device Axxius 800 - page 228

    5-12 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er) ppp sec urity server Synt ax: set {rtr_card-addr} ppp security server {none|radius|tacacs} Exampl e: set 5 ppp security server none The example will s et the Router in slot 5 to not use an ex ternal security server to authenticate r emote PPP devices. {rtr _card -add r} The slot numb ...

  • Carrier Access Network Device Axxius 800 - page 229

    Axxiu s 800 - R elease 2.2 5-12 9 CLI Comman ds set set (router) proxy Use the set (rou ter) proxy co mmand to enable/disab le proxy ARP mode on the Rout er. This command will add an IP interface between th e Controller and the R outer over the backplane. In this way the Controller can be accessed by IP hosts over the Router’ s LAN/WAN interfaces ...

  • Carrier Access Network Device Axxius 800 - page 230

    5-13 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set There are numerous cas es of IP addr ess assign ments for the proxy and eac h case ca uses slig htly differen t behav ior: Proxy address is in the same subnet as the Controller LAN address. If the Contro ller Ethe rnet I P address and th e proxy IP ad dress are in th e same subnet, either since bo ...

  • Carrier Access Network Device Axxius 800 - page 231

    Axxiu s 800 - R elease 2.2 5-13 1 CLI Comman ds set set (router) reboot Use the set ( router) reboot command to set automatic rebo ot after an u pload of code o r configuration f ile. Synt ax: set {rtr_card-addr} reboot {code|config} {disable|enable} Exampl e: set 5 reboot both disable Disabl e automatic reboot after upload fo r the Rou ter in slot ...

  • Carrier Access Network Device Axxius 800 - page 232

    5-13 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) s nmp Use the set (ro ute r) snm p command to set the SNMP contact, lo cation and name on the specified Router card . set (router) snmp contact Use the s et (router) snmp contact command to set the valu e of sysContact o n the specified Router card. Synt ax: set {rtr_card-addr} snmp c ...

  • Carrier Access Network Device Axxius 800 - page 233

    Axxiu s 800 - R elease 2.2 5-13 3 CLI Comman ds set set (router) snmp name Use the set (ro uter) snmp name comman d to set the value of sysName on the specified Router card. Synt ax: set {rtr_card-addr} snmp name {"system-name"} Exampl e: set 1 snmp name "AxxiusRouters" The example will set the v alue of sy sName on the TSR card ...

  • Carrier Access Network Device Axxius 800 - page 234

    5-13 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) s tp Use the set (ro ute r) st p commands to con figure the Spanning Tree Protocol on the Rou ter. Note : Enter {slot} only, if {slot:port} is entered th e command will be directed to the Router LAN and no t the Router Card. set (router) stp bridge forwarddela y Use the set (router) s ...

  • Carrier Access Network Device Axxius 800 - page 235

    Axxiu s 800 - R elease 2.2 5-13 5 CLI Comman ds set set (router) stp bridge maxage Use the set (rou ter) stp brid ge maxage co mmand to conf igure Spanni ng Tree maxim um age value for th e bridge. T he bridge max age v alue specifies the maximum age of received protoco l informat ion befo re it is discarded. Synt ax: set {rtr_card-addr} stp maxage ...

  • Carrier Access Network Device Axxius 800 - page 236

    5-13 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router) stp enable/disabl e Use the set (router) stp ena ble/disable command to enab le and disabl e Spanning Tree Prot ocol on th e Rout er. Synt ax: set {rtr_card-addr} stp {disable|enable} Exampl e: set 3 stp enable The example will en able Spanning Tree o n the Router in sl ot 3. {rtr _ca ...

  • Carrier Access Network Device Axxius 800 - page 237

    Axxiu s 800 - R elease 2.2 5-13 7 CLI Comman ds set set (router) s yslog Use the set (rout er) syslo g commands to configure th e Rout er to send alarm and event messag es to a Syslog s erv er. set (router) syslog enable/disabl e Use the set (rou ter) syslog enable/dis able command to enable and disable send ing alarm and eve nt messages to an exte ...

  • Carrier Access Network Device Axxius 800 - page 238

    5-13 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (route r) syslog level Use the set (r outer) syslo g leve l command to set the Syslog severity level . Events of all severity levels lo wer in number (more severe) will be se nt to the Syslog server. Syntax: set {rtr_card-addr} syslog level {severity} Example : set 3 syslog level 4 The example ...

  • Carrier Access Network Device Axxius 800 - page 239

    Axxiu s 800 - R elease 2.2 5-13 9 CLI Comman ds set set (router-la n) filter forwar d Use the set (router-lan) filter forward command to specify the f orwarding mode for Lay er 2 filters on the LAN interface. Synt ax: set {rtr_lan-addr} filter forward {matching|nontmatching} Exampl e: set 3:1 filter forward notmatching {rtr_lan -addr} The Router ad ...

  • Carrier Access Network Device Axxius 800 - page 240

    5-14 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-la n) framing Use the set ( router-lan) framing command to s pecify which Ethe rnet frame types ar e suppor ted on the LAN interface. Synt ax: set {rtr_lan-addr} framing {ipx|other} {ieee8022|ieee8023|ethii|snap} {disable|enable} Exampl e: set 3:1 framing ipx ieee8022 enable The exampl ...

  • Carrier Access Network Device Axxius 800 - page 241

    Axxiu s 800 - R elease 2.2 5-14 1 CLI Comman ds set set (router-la n) gateway Use the set ( router-lan) gateway co mmand to specify a d efault IP gateway for the s pecified LAN interface. If there is no static network entry to 0.0.0 .0, then this add ress is used a s the default gateway for packets with no explici t route. Synt ax: set {rtr_lan-add ...

  • Carrier Access Network Device Axxius 800 - page 242

    5-14 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-la n) ip address Use the set (router-lan) ip address command to specif y an IP address for the specified LAN interface. When first installed the Router car d’s LAN interf ace has a de fault IP address of 10.0.0.1 with subnet mask of 255.0.0 .0. Synt ax: set {rtr_lan-addr} ip address ...

  • Carrier Access Network Device Axxius 800 - page 243

    Axxiu s 800 - R elease 2.2 5-14 3 CLI Comman ds set set (router-la n) ipx network Use the set (rou ter-lan) ipx net work command to specify I PX network numbers fo r the four IPX LAN frame types. This enables the Axxius to Ro uter IPX to Remote (WAN) net works, even if an IPX server does not exist o n the local LAN. Typically, the Axxius will learn ...

  • Carrier Access Network Device Axxius 800 - page 244

    5-14 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-la n) phy Use the set ( router-lan) phy command to specify the Ethern et PHY (physical s pecifications) speed and mode. NOTE: It is highly recommended that thi s setti ng be le ft at auto- negoti ation. Connecti ng Ethernet devic es with incompatib le setting can lead to severe networ ...

  • Carrier Access Network Device Axxius 800 - page 245

    Axxiu s 800 - R elease 2.2 5-14 5 CLI Comman ds set set (router-la n) rip Use the set (router-lan) rip commands to s pecify RIP for the specif ied LAN interface. set (rout er-lan) rip i p Use the set (router-lan) rip ip command to specify the IP RIP for the specified LAN interface. Synt ax: set {rtr_lan-addr} rip ip {both|neither|recv|send} Exampl ...

  • Carrier Access Network Device Axxius 800 - page 246

    5-14 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er-lan) rip i px Use the set (router- lan) rip i px command to specify the IPX RIP and SA P for the specified LAN interface. Synt ax: set {rtr_lan-addr} rip ipx {both|neither|recv|send} Exampl e: set 2:1 rip ipx send The example will set RIP and SAP on the local LAN interface on s lot 2 ...

  • Carrier Access Network Device Axxius 800 - page 247

    Axxiu s 800 - R elease 2.2 5-14 7 CLI Comman ds set set (router-la n) stp Use the set ( router-lan) stp command s to configur e the Spanning Tree Pro tocol on this interface. set (router- lan) stp enable/d isable Use the set (router-la n) stp enable/d isable command to enab le/disable Spanning Tree Protocol on this interface. To enab le STP on an i ...

  • Carrier Access Network Device Axxius 800 - page 248

    5-14 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router- lan) stp port cost Use the set (router-lan) stp port cost command to co nfigure Spanning Tree path cost value for this bridge port. Synt ax: set {rtr_lan-addr} stp port cost {port-cost-value} Exampl e: set 3:1 stp port cost 100 Sets the Spanning T ree port cost valu e at 100, on the R ...

  • Carrier Access Network Device Axxius 800 - page 249

    Axxiu s 800 - R elease 2.2 5-14 9 CLI Comman ds set set (router-lan) up/down Use the set (router-lan) up/d own command to set the specified LAN interface up or down. When the Router port is set down, a link failure will not cause an alarm. This can be used to eliminate alarms from Router port s that are not in-use. Wh en the Router port is set up, ...

  • Carrier Access Network Device Axxius 800 - page 250

    5-15 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-t runk ) encapsulation Use the set (router- trunk) encaps ulation command to specify the encapsula tion to use on the TSR interface. Synt ax: set {rtr_trunk-addr} encapsulation {setting} Exampl e: set 2:1:5 encapsulation pppofr The exampl e will configure encaps ulation on the Ro uter ...

  • Carrier Access Network Device Axxius 800 - page 251

    Axxiu s 800 - R elease 2.2 5-15 1 CLI Comman ds set set (router-t runk) s peed Use the set (router-trunk) speed command to specify the data speed for each DS0 in the given trunk. This command takes effect upon transiti on of the trunk to active. This command app lies to the TSR card only. Synt ax: set {tsr-trunk-addr} speed {56|64} Exampl e: set 3: ...

  • Carrier Access Network Device Axxius 800 - page 252

    5-15 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-wa n) dlci Use the set (router-wa n) dlci command to set the DLCI ( Data Link C onnection Iden tifier) for a specified WAN interface. Synt ax: set {rtr_card-addr} {"wan-name"} dlci {value} Exampl e: set 1 "LosAngeles" dlci 16 The example will s et the WAN interface ...

  • Carrier Access Network Device Axxius 800 - page 253

    Axxiu s 800 - R elease 2.2 5-15 3 CLI Comman ds set set (router-wa n) gre Use the set (router-wan) gre comm and to config ure Generic R outing Encap sulatio n tunnel ing for a specified WAN inter face. set (router- wan) gre address Use the set ( router-wan) gre address command to configure th e IP addresses for GRE tunneling for a speci fied WAN in ...

  • Carrier Access Network Device Axxius 800 - page 254

    5-15 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er-wan) gre ip Use the set ( router-wan) gre ip comm and to confi gure the GR E tunneli ng of the IP protocol for a specified WAN interface. Synt ax: set {rtr_card-addr} {"wan-name"} gre ip {all|bynetwork|disable} Exampl e: set 3 "LosAngeles" gre ip all The example wi ...

  • Carrier Access Network Device Axxius 800 - page 255

    Axxiu s 800 - R elease 2.2 5-15 5 CLI Comman ds set set (router-wa n) ip Use the set ( router-wan) ip command to set the IP traffic h andling on the W AN interface. Synt ax: set {rtr_card-addr} {"wan-name"} ip {block|bridge|route} Exampl e: set 1 "LosAngeles" ip route Sets the WAN interface named "LosAngeles" on the Ro ...

  • Carrier Access Network Device Axxius 800 - page 256

    5-15 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-wa n) ipx Use the set ( router-wan) ipx comman d to set the IPX traffic handlin g on the specified WAN interface. Synt ax: set {rtr_card-addr} {"wan-name"} ipx {setting} Exampl e: set 1 "LosAngeles" ipx bridge The example will set the W AN interface named "Los ...

  • Carrier Access Network Device Axxius 800 - page 257

    Axxiu s 800 - R elease 2.2 5-15 7 CLI Comman ds set set (router-wa n) nat Use the set (router- wan) nat commands to configure Netwo rk Address Translation (NAT) on a specified WAN interface. set (rout er-wan) nat address Use the set ( router-wan) nat address co mmand to configure Network Address Translation (NAT) public addres ses for a sp ecified ...

  • Carrier Access Network Device Axxius 800 - page 258

    5-15 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er-wan) nat enable/ disable Use the s et (router-wan) nat com mand to enable and di sable Network Add ress Translation (NAT) on a specified WAN interface. Synt ax: set {rtr_card-addr} {"wan-name"} nat {disable|enable} Exampl e: set 1 "LosAngeles" nat enable The exampl ...

  • Carrier Access Network Device Axxius 800 - page 259

    Axxiu s 800 - R elease 2.2 5-15 9 CLI Comman ds set set (router-wa n) other Use the set (ro uter-wan) other comma nd to set t he t raf fic ha ndlin g of pr ot oco ls ot her th an IP or IPX on the specified WAN interface. Synt ax: set {rtr_card-addr} {"wan-name"} other {block|bridge} Exampl e: set 1 "LosAngeles" other bridge The ...

  • Carrier Access Network Device Axxius 800 - page 260

    5-16 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-wa n) ppp Use the set (router) ppp command to configur e the PPP ( Point-to-P oint Pr otocol) on the specified Router card . set (router- wan) ppp auth ofremote user Use the set (router-wan) ppp auth ofremote user comm and to set the CHAP or PAP name by which a remote PPP device is au ...

  • Carrier Access Network Device Axxius 800 - page 261

    Axxiu s 800 - R elease 2.2 5-16 1 CLI Comman ds set set (router- wan) ppp compression Use the set (router-wan) ppp co mpression command to con figure the PPP compr ession with the remote PPP d evice. Synt ax: set {rtr_card-addr} {"wan-name"} ppp compression {setting} Exampl e: set 5 "LosAngeles" ppp compression enable The exampl ...

  • Carrier Access Network Device Axxius 800 - page 262

    5-16 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (router-wa n) rip Use the set ( router-wan) rip command s to set the type of RIP updates on the WAN interface. set (router- wan) rip ip update s Use the set (router-wan) rip ip updat es command to set the type of RI P updates on the specified WAN interface. Synt ax: set {rtr_card-addr} {" ...

  • Carrier Access Network Device Axxius 800 - page 263

    Axxiu s 800 - R elease 2.2 5-16 3 CLI Comman ds set set (router-wa n) stp Use the set (router-wan) stp commands to configure the Span ning Tree Protocol o n the specified WAN interface. set (rout er-wan) stp enable/ disable Use the set (router-wan) st p enable/disa ble command to enab le and disable Spann ing Tree Protocol on this interface. To ena ...

  • Carrier Access Network Device Axxius 800 - page 264

    5-16 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (rout er-wan) stp port cost Use the set ( router-wan) stp port cost command to configure Span ning Tree path co st value for this bridge port. Synt ax: set {rtr_card-addr} {"wan-name"} stp port cost {port-cost-value} Exampl e: set 3 stp port cost 650 The exampl e sets the Spanning Tr ...

  • Carrier Access Network Device Axxius 800 - page 265

    Axxiu s 800 - R elease 2.2 5-16 5 CLI Comman ds set set (router-wa n) trunk Use the set (router-wa n) trunk command to configure the trunk port or mult ilink group for a specified WAN interface. If the trunk encapsula tion is subsequently ch anged, this tru nk ass ignm ent is r ese t to 0. Synt ax: set {rtr_card-addr} {"wan-name"} trunk [ ...

  • Carrier Access Network Device Axxius 800 - page 266

    5-16 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set s creen Use the set screen command to set t he height of the scr olling output screen , in number of lines. For example, if the screen height is set to 40 lines, the Command Line Interface (CLI) will print the maxi mum of 40 lines o f a long output before paus ing. To s et the sc reen to sc ro ...

  • Carrier Access Network Device Axxius 800 - page 267

    Axxiu s 800 - R elease 2.2 5-16 7 CLI Comman ds set set s nmp Use the set snmp command to set the Simple N etwork Management Protocol (SN MP) MIB-II System Group o bjects. Synt ax: set snmp {setting} {"string"} Where {setting } is as below, and {string} is its value. Exampl e: set snmp name "Axxius 1" To set the SNMP system name ...

  • Carrier Access Network Device Axxius 800 - page 268

    5-16 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set time Use the set ti me command to set th e time. Synt ax: set time {hh:mm:ss} Exampl e: set time 12:00:00 The exampl e will set the time to 12 no on. {hh:mm:ss} Where hh:mm:ss is the time in ho urs, minutes, and seconds, usin g a 24-hour clock. ...

  • Carrier Access Network Device Axxius 800 - page 269

    Axxiu s 800 - R elease 2.2 5-16 9 CLI Comman ds set set user Use the set user comm and to modify attributes for a s peci fic user that have been created with the add use r command . set u ser level Use the set user level com mand to set the user access level. Synt ax: set user {"user-name"} level {1|2|3} Exampl e: set user "paul" ...

  • Carrier Access Network Device Axxius 800 - page 270

    5-17 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (v35 ) Use the se t (v35) comman d to setup V.35 ports. The comm and specifies the range of channels within that card, and the setting to apply. Synt ax: set {v35-addr} {setting} Exampl e: set 6:1 rxclk normal To set port 1 (v.35) on slot 6 to no in version on the receive clo ck {v35-addr } In ...

  • Carrier Access Network Device Axxius 800 - page 271

    Axxiu s 800 - R elease 2.2 5-17 1 CLI Comman ds set speed Set the data rate for each DS0 to which a V.35 is crosscon nected 56 56K d at a rat e 64 64K d at a rat e txclkinv Set the transmit clock inv ert mode to one of the following : invert invert the transmit clock normal do not inv ert the transmit clock ...

  • Carrier Access Network Device Axxius 800 - page 272

    5-17 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set (v54 ) Use the set ( v54) co mmand to se tup V.54 Loopback Test Parameters. The command specifies the range of channels within that card, and the sett ing to apply. Synt ax: set {v54-addr} v54 {setting} [off|on] [n] [nnn] Exampl e: set 6:1 v54 equipment clear The exampl e will clear the loop t ...

  • Carrier Access Network Device Axxius 800 - page 273

    Axxiu s 800 - R elease 2.2 5-17 3 CLI Comman ds set [nnn] chart pattern Syntax: set{v54-addr} v54 equipm ent pattern {n} Set V.54 test patter n n is from the following: 0 = QRSS pattern (d efault) 1 = 2047 pattern 2 = 2 15 -1 pat tern 3 = 2 20 - 1 pattern (Q RSS with n o bit st uffing) prepcnt Syntax: set {v54-addr} v54 equipment prepcnt {nnn} Set ...

  • Carrier Access Network Device Axxius 800 - page 274

    5-17 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds set set verification Use the set verification co mmand to enabl e or disa ble verifi cation prom pts. Synt ax: set verification {off|on} Exampl e: set verification off The exampl e will cause yes/no verification messages to be s uppressed. {off|on} off Tur n yes /no ve rifi cat ion pro mpt s of f. on ...

  • Carrier Access Network Device Axxius 800 - page 275

    Axxiu s 800 - R elease 2.2 5-17 5 CLI Comman ds show show The following s how commands are link ed to a detailed d escription of each command. show (adpcm) show (rout er) ntp show autoex it show (rout er) por t show (br i) show (ro uter ) pp p show cc labels show ( router) ri p show cloc k show (rout er) sn mp show con ne ct show (ro ute r) s tp sh ...

  • Carrier Access Network Device Axxius 800 - page 276

    5-17 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (adpcm) Use the show (a dpcm) command to dis play the settings for the ADPCM card. Synt ax: show {adpcm-addr} Exampl e: > show 6:1 show 6:1 SLOT 6: Settings for DS1 1: Circuit ID: CAC DS1# 6:1 Up/Down: UP Framing: ESF Line Coding: B8ZS Line Build Out: DSX-1 EQUALIZATION FOR 0- 133 ft. (CS ...

  • Carrier Access Network Device Axxius 800 - page 277

    Axxiu s 800 - R elease 2.2 5-17 7 CLI Comman ds show show autoex it Use the show autoexit co mmand to display whether auto exit is on or off. If on, the time-out peri od is di spla yed. Synt ax: show autoexit Exampl e: > show autoexit Autoexit is off. show (bri) Use the show (bri ) command to display settings for BRIs. Synt ax: show {bri-addr} E ...

  • Carrier Access Network Device Axxius 800 - page 278

    5-17 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show cclabels The show c cl ab els command displa ys all us er defined DS 0 cross- connect l abels. Synt ax: show cclabels Exampl e: show cclabels > show cclabels Current DS0 Connectio n Labels: ---------- ---------- ---------- ---------- ---------- ’label1’ ’label2’ ’label3’ ’la ...

  • Carrier Access Network Device Axxius 800 - page 279

    Axxiu s 800 - R elease 2.2 5-17 9 CLI Comman ds show show connect The show connect com mand displays the static conn ections for channels and ports. Synt ax: show connect {slot|slot:port|slot:port:channel| slot:port:channel:sub-channel} Exampl e: show connect a:1:1-4 From Desc Desc T o Comment A:01:01 DATA DS0 A:01:02 DATA DS0 A:01:03 DATA DS0 A:01 ...

  • Carrier Access Network Device Axxius 800 - page 280

    5-18 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show connect adpcm The show connect adpcm command dis plays the connections for the ADPCM port. Synt ax: show connect adpcm {adpcm-addr} Exampl e: show connect 1:1 > show connect adpcm 1 :1 From D esc Desc To -------------- ------------ - ------------- ---------- 1:01:01(01/02) DAT A DS0 <- ...

  • Carrier Access Network Device Axxius 800 - page 281

    Axxiu s 800 - R elease 2.2 5-18 1 CLI Comman ds show show (ds0) The sho w (ds0) command displays settings for DS0s. Synt ax: show {ds0-addr} Exampl e: show a:2:1-2 In the following example, the show (ds0) command has queried s lot A (Contr oller car d), port 2, ch annels 1 th rough 2. >show a:2:1-2 SLOT A: Settings for DS1 1: channel 1: Type: D ...

  • Carrier Access Network Device Axxius 800 - page 282

    5-18 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (ds1) The sho w (ds1) command displays settin gs for DS1s. Synt ax: show {ds1-addr} Exampl e: show 1:1 SLOT A: Settings for DS1 1: Circuit ID: CAC DS1# A:1 Up/Down: DOWN Framing: ESF Line Coding: B8ZS Line Build Out: DSX-1 EQUALIZATION FOR 0-133 ft.(CSU 0dB) Loop Code Detectio n:ON Loopback: ...

  • Carrier Access Network Device Axxius 800 - page 283

    Axxiu s 800 - R elease 2.2 5-18 3 CLI Comman ds show show (ds3) The sho w (ds3) comm and disp lays t he current se ttings fo r a DS3. Synt ax: show {ds3-addr} Exampl e: show a:1 SLOT A: Settings for DS3 Port 1: Circuit ID: CAC T3# A:1 Up/Down: UP De-jitter Buffer: OFF Framing: M23 Transmit Clock: NORMAL Loop Code Detectio n: OFF Loopback: OFF Berth ...

  • Carrier Access Network Device Axxius 800 - page 284

    5-18 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show {ds3-addr} In the form of {slot:port}. show ethernet The show ethernet co mm and disp lays Et her ne t and IP se ttin gs. Exampl e: show ethernet > show ethernet IP Address and Mask : 198.162.3.196 255.25 5.255.0 IP Address of the G ateway: 192.168.3.202 MAC Address: 00:E0:97:00:A9:33 show ext ...

  • Carrier Access Network Device Axxius 800 - page 285

    Axxiu s 800 - R elease 2.2 5-18 5 CLI Comman ds show show (fxo) The show (f xo) command d isplays the setti ngs for FXOs. Synt ax: show {fxo-addr} Exampl e: show 7:1 The example shows settings for port 1 on the FXO card i slot 7. > show 7:1 SLOT 7: Settings for FXO: ch annel 1: Type: V OICE Signaling: L S RxGain: - 6 dB TxGain: - 3 dB {fxo-addr ...

  • Carrier Access Network Device Axxius 800 - page 286

    5-18 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (fxsPS or fxsPSM) The sho w (fxsPS or fxsPSM) co mmand displ ays the se ttings fo r the Si ngle Ch annel POTS card wi thout mod em (FXS PS) or wi th modem (FXS PSM). Synt ax: show {fxsPS-addr|fxsPSM-addr} Exampl e: show 8:1 The example shows sett ings for the FXS PS card in slot 8. > show ...

  • Carrier Access Network Device Axxius 800 - page 287

    Axxiu s 800 - R elease 2.2 5-18 7 CLI Comman ds show show image The sho w imag e command displays the ap plication images stored in the Controller or Rout er. Synt ax: show [rtr_card-addr] image Exampl e: show image > show image App. Image: Ver=7.0 Fri Aug 29 06:40:42 2003 - ACTIV E App. Image: Ver=7.0 Thu Aug 14 13:01:18 2003 - BACKU P Exampl e ...

  • Carrier Access Network Device Axxius 800 - page 288

    5-18 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show impedance The sh ow impe danc e com mand dis pla ys the imp edan ce setti ngs f or FX S 5G c ar d. Synt ax: show impedance Exampl e: show impedance Index Im pedance CODEC Country 1 120 Ohms + (. 110 µ F || 820 Ohms) A-law Norway 2 150 Ohms + (. 047 µ F || 510 Ohms) A-law Malaysia 3 150 Ohm ...

  • Carrier Access Network Device Axxius 800 - page 289

    Axxiu s 800 - R elease 2.2 5-18 9 CLI Comman ds show show ip The sho w ip command displays the IP Ad dress info rmation for the Axxius 800. Synt ax: show ip Exampl e: show ip IP Address and Mask : 192.168.3.193 255.255 .255.0 IP Address of the G ateway: 192.168.3.202 OK show ipds0 The show ipds 0 command displays the settin gs for the DS0 m anageme ...

  • Carrier Access Network Device Axxius 800 - page 290

    5-19 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show lsprotect The show lsprotect command di splays the low speed protection inf ormation. Synt ax: show lsprotect Exampl e: show lsprotect > SHOW lsprotect Low Speed Protection Settings : Low Speed Protection G lobal Service Enable: ENABLED Backup Slot Settings: Backup Slot: 7 Backup Slot Typ ...

  • Carrier Access Network Device Axxius 800 - page 291

    Axxiu s 800 - R elease 2.2 5-19 1 CLI Comman ds show show ntp The sho w ntp co mmand dis plays se ttings for Network Time Proto col. Synt ax: show ntp Exampl e: show ntp NTP Settings: NTP: Disab led NTP Server Address : 0.0.0.0 NTP Polling Interv al (seconds): 16 NTP Timezone (offs et from GMT): 0 hours 0 minutes show (ocudp) Use the show (ocu dp) ...

  • Carrier Access Network Device Axxius 800 - page 292

    5-19 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show radius The show ra dius com mand displays the RADIUS config uration settings for the Co ntroller. Synt ax: show radius Exampl e: show radius RADIUS Configuration P arameters: Authentication: disab led NAS Identifier: Retry count: 3 Timeout (sec): 3 Server(1) : UNUSE D Server(2) : UNUSE D Ser ...

  • Carrier Access Network Device Axxius 800 - page 293

    Axxiu s 800 - R elease 2.2 5-19 3 CLI Comman ds show show (router) The show (router) command displays the settings for the Router card. Synt ax: show {rtr_card-addr} Exampl e: show 1 SLOT 1: LMI Settings for Route r: LMI: Di sabled RIP Setting for Router : RIP Mode Receive: RIP1 RIP Mode Send: RIP1 PPP Authentication/Sec urity Settings for Router: ...

  • Carrier Access Network Device Axxius 800 - page 294

    5-19 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show Spanning Tree Protocol Settings for Router: Spanning Tree: Disabled Syslog Settings for Ro uter: Syslog: Disabled TFTP Upload/Download U ser Settings for Router: Reboot After Code is Loaded: Yes Reboot After Confi guration is Loaded: Yes Upload/Download IP Address Client Site Code Config Total: 0 ...

  • Carrier Access Network Device Axxius 800 - page 295

    Axxiu s 800 - R elease 2.2 5-19 5 CLI Comman ds show show (router) dhcp The show (router) dhcp command displays the cur rent DHCP settings for the Router card. Synt ax: show {rtr_card-addr} dhcp Exampl e: show 5 dhcp The following 3 examples, shows there is different information is displayed depending on the settin gs. > show 5 dhcp SLOT 5: DHCP ...

  • Carrier Access Network Device Axxius 800 - page 296

    5-19 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router) dns The show (router) dns command disp lays the current DNS setup f or the Router card . Synt ax: show {rtr_card-addr} dns Exampl e: show 3 dns > show 3 dns SLOT 3: DNS Settings: DNS Resolver: Disabled DNS Server 1 IP Ad dress: 0.0.0.0 DNS Server 2 IP Ad dress: 0.0.0.0 DNS Host N ...

  • Carrier Access Network Device Axxius 800 - page 297

    Axxiu s 800 - R elease 2.2 5-19 7 CLI Comman ds show show (router) lmi The show (router) lmi command displays the curren t Local Management I nterface (LMI) settings for the R outer card. Synt ax: show {rtr_card-addr} lmi Exampl e: show 5 lmi The example shows the LMI settings for the Router card in slot 5. > show 5 lmi SLOT 5: LMI Settings for ...

  • Carrier Access Network Device Axxius 800 - page 298

    5-19 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router) ntp The show (router) ntp comm and d ispl ays se tti ngs f or NTP o pti ons. Synt ax: show {rtr_card-addr} ntp Exampl e: show 4 ntp The exampl e shows the NTP options fo r the Router card in slot 4. > show 4 ntp SLOT 4: NTP Settings for QTSR: NTP: Disabled NTP Server: 0.0.0.0 NTP ...

  • Carrier Access Network Device Axxius 800 - page 299

    Axxiu s 800 - R elease 2.2 5-19 9 CLI Comman ds show show (router) port The show (router) port comman d displays the current TSR por ts configurat ion. This com mand applies to the Terminal Server Router card on ly. Synt ax: show {tsr_card-addr} port Exampl e: show 1 port SLOT 1: Port Profiles for Term inal Server Router: Port 1 Name: none Type: RS ...

  • Carrier Access Network Device Axxius 800 - page 300

    5-20 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router) ppp The show (router) ppp command displa ys the current Local P PP (Point -to-Poin t Protocol ) authentication and security settin gs for the Router card. Synt ax: show {rtr_card-addr} ppp Exampl e: show 5 ppp > show 5 ppp SLOT 5: PPP Authentication/Sec urity Settings for Router: ...

  • Carrier Access Network Device Axxius 800 - page 301

    Axxiu s 800 - R elease 2.2 5-20 1 CLI Comman ds show show (router) rip The show (router) rip command dis plays the curre nt RIP settings for the Router card. Synt ax: show {rtr_card-addr} rip Exampl e: show 5 rip SLOT 5: RIP Settings for Route r: RIP Mode Receive: RIP2 RIP Mode Send: Rip2 {rtr _card -add r} The slot number (1-8 ) that contains the ...

  • Carrier Access Network Device Axxius 800 - page 302

    5-20 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router) stp The sho w (router) stp command di splays t he curre nt Spanning T ree Protoc ol se ttings for the specified Router card . Synt ax: show {rtr_card-addr} stp Exampl e: show 5 stp > show 5 stp SLOT 5: Spanning Tree Protocol Settings for Router: Spanning Tree: Enabled Bridge Hell ...

  • Carrier Access Network Device Axxius 800 - page 303

    Axxiu s 800 - R elease 2.2 5-20 3 CLI Comman ds show show (router) uploaduser The show uploa duser com mand displays the current list of users allowed to upload and download con figuration and co de files. Synt ax: show {rtr_card-addr} uploaduser Exampl e: show 5 uploaduser > show 5 uploaduser SLOT 5: TFTP Upload/Download U ser Settings for Rout ...

  • Carrier Access Network Device Axxius 800 - page 304

    5-20 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router-lan) The show (router-lan) command di splays the settings for the router car d. Synt ax: show {rtr_lan-addr} Exampl e: show 3:1 > show 3:1 SLOT 3: Settings for TSR LAN 1 : Profile Name: LocalUnit Up/Down: UP Proxy: Disabled Physical link: Automatic MAC Address: 00:E0:97:FF:FF:FE I ...

  • Carrier Access Network Device Axxius 800 - page 305

    Axxiu s 800 - R elease 2.2 5-20 5 CLI Comman ds show Total: 0 Static MAC Address Set tings for LocalUnit: Total: 0 LAN Filters Enabled fo r LocalUnit: Forward Mode: Forw ard ALL Frames NOT Matching Filte rs Filter Type Sour ce/Dest Filter Name Total: 0 LAN MAC Address Filter s Defined for LocalUnit: Total: 0 LAN Protocol Filters D efined for LocalU ...

  • Carrier Access Network Device Axxius 800 - page 306

    5-20 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router-lan) filte r The s how (router-lan) f ilter command disp lays the current LAN Layer 2 data filters appl ied to the LAN on the specified Router card. Synt ax: show {rtr_lan-addr} filter [address|all|custom|protocol] Exampl e: show 5:1 filter > show 5:1 filter SLOT 5: LAN Filters En ...

  • Carrier Access Network Device Axxius 800 - page 307

    Axxiu s 800 - R elease 2.2 5-20 7 CLI Comman ds show {rtr_lan -addr} The Router address is in the form {slot:p ort} or {slot "profile-name"} [addres s|cus tom|p rotoco l|all] This setting will disp lay the defined filter types of the specified fil ters. slot The slot number (1-8) th at contains the Router card. port Port nu mber of th e R ...

  • Carrier Access Network Device Axxius 800 - page 308

    5-20 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (rout er-la n) stat ic The show (rou ter-lan) static co mmands to display the current list of static entries for the LAN on the specified Router car d. show (router -lan) stati c ip address The show (router-lan) static ip address command displays the current li st of static IP address entrie ...

  • Carrier Access Network Device Axxius 800 - page 309

    Axxiu s 800 - R elease 2.2 5-20 9 CLI Comman ds show show (router -lan) stati c ip network The show (router-lan) static ip network command displays the current list of static IP network entries for the LAN on the s pecified Router card. Synt ax: show {rtr_lan-addr} static ip network Exampl e: show 5:1 static ip network SLOT 5: Static IP Network Set ...

  • Carrier Access Network Device Axxius 800 - page 310

    5-21 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router -lan) stati c mac address The show (router-la n) static mac address command displays the current list of stati c MAC address entr ies for the LAN on the specified Rou ter card. Synt ax: show {rtr_lan-addr} static mac address Exampl e: show 5:1 static mac address SLOT 5: Static MAC Ad ...

  • Carrier Access Network Device Axxius 800 - page 311

    Axxiu s 800 - R elease 2.2 5-21 1 CLI Comman ds show show (router-lan) stp The show (r outer-lan) stp co mmand display s the current Spanning Tree Protocol settings for the specified LAN interf ace. Synt ax: show {rtr_lan-addr} stp Exampl e: show 3:1 stp > show 3:1 stp SLOT 3: LAN Spanning Tree Prot ocol Settings for LocalUnit: Spanning Tree: En ...

  • Carrier Access Network Device Axxius 800 - page 312

    5-21 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router-wan) The sh ow (router-wan ) command dis plays the current conf igu ration settings for the specified WAN interface. Synt ax: show {rtr_card-addr} {"wan-name"} Exampl e: show 3 "RemoteUnit" > show 3 "RemoteUnit" SLOT 3: Settings for TSR WAN L osAngele ...

  • Carrier Access Network Device Axxius 800 - page 313

    Axxiu s 800 - R elease 2.2 5-21 3 CLI Comman ds show WAN Spanning Tree Prot ocol Settings for RemoteUnit: Spanning Tree: Disabled WAN Static IP Network Settings for RemoteUnit: Total: 0 WAN Static IPX Network Settings for RemoteUnit: Total: 0 WAN Static IP Address Settings for RemoteUnit: Total: 0 WAN Static MAC Address Settings for RemoteUnit: Tot ...

  • Carrier Access Network Device Axxius 800 - page 314

    5-21 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router-wan) firewa ll The show (router-wan) firewall command displays the current firewall filter settings for the specified WAN interface. Synt ax: show {rtr_card-addr} {"wan-name"} firewall Exampl e: show 5 "LosAngeles" firewall > show 5 "LosAngeles" firew ...

  • Carrier Access Network Device Axxius 800 - page 315

    Axxiu s 800 - R elease 2.2 5-21 5 CLI Comman ds show show (router-wan) ppp The sho w (rou ter-w an) ppp com mand displ ays the cu rrent PPP (Point-to -Point P rotocol) settings for the specified WAN interface. Synt ax: show {rtr_card-addr} {"wan-name"} ppp Exampl e: show 5 "LosAngeles" ppp > show 5 "LosAngeles" ppp ...

  • Carrier Access Network Device Axxius 800 - page 316

    5-21 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router-wan) st atic ip addr ess The show (router-wan) static ip a ddress command displays the curr ent list of static IP address entries for the specified W AN interface. Synt ax: show {rtr_card-addr} {"wan-name"} static ip address Exampl e: show 5 "LosAngeles" static ip ...

  • Carrier Access Network Device Axxius 800 - page 317

    Axxiu s 800 - R elease 2.2 5-21 7 CLI Comman ds show show (router-wan) st atic ip x netw or k The sho w (router-wa n) st atic ip x netwo rk command displays the current lis t of static IPX network entries for the specified WAN interface. Synt ax: show {rtr_card-addr} {"wan-name"} static ipx network Exampl e: show 5 "LosAngeles" ...

  • Carrier Access Network Device Axxius 800 - page 318

    5-21 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (router-wan) st atic nat address The show (r oute r-wa n) st atic na t addre ss command displays the cur rent static NAT addres s entries for the specified W AN interface. Synt ax: show {rtr_card-addr} {"wan-name"} static nat address Exampl e: show 5 "LosAngeles" static n ...

  • Carrier Access Network Device Axxius 800 - page 319

    Axxiu s 800 - R elease 2.2 5-21 9 CLI Comman ds show show (router-wan) trunk The show ( rou ter-w an) tr unk command displays the current trun k assignm ent for the s pecified WAN interface. Synt ax: show {rtr_card-addr} {"wan-name"} trunk Exampl e: show 5 "LosAngeles" trunk > show 5 "LosAngeles" trunk SLOT 5: WAN T ...

  • Carrier Access Network Device Axxius 800 - page 320

    5-22 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show snmp The sho w snmp command display s the SNMP settings. Exampl e: show snmp SNMP Settings: System Name: System Location: System Contact: GET Community: public SET Community: desktop TRAP Community: public Trap version: 0 Authentication TRA P disabled Event TRAP none NMS 1: NMS 2: NMS 3: sho ...

  • Carrier Access Network Device Axxius 800 - page 321

    Axxiu s 800 - R elease 2.2 5-22 1 CLI Comman ds show show time The sh ow ti me comman d display s the sy stem time, in 24 ho ur hh:mm: ss for mat. Synt ax: show time Exampl e: show time > show time time: 00:22:51 show users The show users command displays a list o f all users and their settings, and if they are logg ed on at the time (0=not logg ...

  • Carrier Access Network Device Axxius 800 - page 322

    5-22 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds show show (v35) Use the show (v35) to display cur rent set tings for V.3 5 card. Synt ax: show {v35-addr} Exampl e: show 2:1 The example shows settings for port 1 (V.35) on slot 2. > show 2:1 SLOT 2: Settings for V35 Port 1: CTS: Always High Timing: Source Rx Clock Inversio n: Normal Tx Clock Inver ...

  • Carrier Access Network Device Axxius 800 - page 323

    Axxiu s 800 - R elease 2.2 5-22 3 CLI Comman ds show show (v54) Use the show (v54) to display cur rent set tings for V.5 4 card. Synt ax: show {v54-addr} Exampl e: show 3:1 The example shows settings for port 1 (V.54) on slot 3. > show 3 SLOT 3: Settings for V35 Port 1: CTS: Always High Timing: Source Rx Clock Inversio n: Normal Tx Clock Inversi ...

  • Carrier Access Network Device Axxius 800 - page 324

    5-22 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us status Use the statu s command to s ee the status of the system clocks , DS0s, DS 1s, equipmen t, and th e DS0 Mana gement Channel . status ( adpcm) status equipment status ( adpcm) per formance status (f xo) status ( adpcm) per formance his tory status (fxsP S or fxsPSM) status ( bri) status ...

  • Carrier Access Network Device Axxius 800 - page 325

    Axxiu s 800 - R elease 2.2 5-22 5 CLI Comman ds stat us statu s (adpcm) Use the stat us (adpcm) co mmand to display the status info rmation for the ADPCM card . Synt ax: status {adpcm-addr} Exampl e: status 6:1 > status 6:1 SLOT 6: Status for DS1 1: Receive: Loss of Signal Transmit: RAI/Yellow Alarm Loopback: OFF {adp cm -ad dr} The ADPCM addres ...

  • Carrier Access Network Device Axxius 800 - page 326

    5-22 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (adpcm) performance Use the status (a dpcm) performance command to display the performance statistics for the current (15 min) and previo us (15 mi n, hour an d day) inf ormation fo r the ADPCM card. Synt ax: status {adpcm-addr} performance Exampl e: status 6:1 performance > status ...

  • Carrier Access Network Device Axxius 800 - page 327

    Axxiu s 800 - R elease 2.2 5-22 7 CLI Comman ds stat us status (adpcm) performance history Use the status (a dpcm) performance history comm and to display p erformance statistics for the current 15 minute interval and all previous 15 minute in tervals (up to a total of 96) for the ADPCM card. Synt ax: status {adpcm-addr} performance history Exampl ...

  • Carrier Access Network Device Axxius 800 - page 328

    5-22 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (bri) Use the statu s (bri) command to display th e status information fo r the ISDN BRI card. Synt ax: status {bri-addr} Exampl e: status 3:1 The e xam ple d isp lay s sta tus of por t 1 (B RI) on sl ot 3. > status 3:1 SLOT 3: Status for BRI Port 1: Loopback: NONE Corrupt CRC: NONE ...

  • Carrier Access Network Device Axxius 800 - page 329

    Axxiu s 800 - R elease 2.2 5-22 9 CLI Comman ds stat us status (bri) performance Use the status (bri) performance command to disp lay the perform ance statistics f or the cur rent (hour and day) and previous ( hour and day ) for the ISDN BRI card. Synt ax: status {bri-addr} performance Exampl e: status 3:1 performance > status 3:1 performan ce S ...

  • Carrier Access Network Device Axxius 800 - page 330

    5-23 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (bri) pe rf ormance history Use the statu s (bri) performance histor y command to dis play the perfor mance statistics for the curr ent 1 hour interval and all previo us 1 h our inte rvals for t he ISDN BRI card. Synt ax: status {bri-addr} performance history Exampl e: status 5:1 perfo ...

  • Carrier Access Network Device Axxius 800 - page 331

    Axxiu s 800 - R elease 2.2 5-23 1 CLI Comman ds stat us statu s (ds0) Use the statu s (ds0) command to display the current status of the specif ied DS0. Synt ax: status {ds0-addr} Exampl e: status a:1:1 Displa ys the curren t status of the DS 0s on por t 1 on s lot A (contro ller card), po rt 1, channel 1. > status a:1:1 DS0 Rx AB T x AB Signal ...

  • Carrier Access Network Device Axxius 800 - page 332

    5-23 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (ds1) Use the sta tus (ds1 ) command to display the curren t status of a DS1. Synt ax: status {ds1-addr} [performance] [history] Exampl e: status a:1 SLOT A: Status for DS1 1: Receive: Traffic Transmit: Traffic Loopback: OFF Exampl e: status 1:1 SLOT A: Status for DS1 1: Receive: Loss ...

  • Carrier Access Network Device Axxius 800 - page 333

    Axxiu s 800 - R elease 2.2 5-23 3 CLI Comman ds stat us status (ds1) performance Use the status (ds1) performance command to display the performance stat istics for the current (15 min) and previo us (15 min, hou r and day) i nforma tion of a DS 1. Synt ax: status {ds1-addr} performance Exampl e: status a:1 performance SLOT A: Performance Statistic ...

  • Carrier Access Network Device Axxius 800 - page 334

    5-23 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (ds1) performance history Use the status (ds1) perf ormance history command to d isplay performance s tatistics for the current 15 minute interval and all previou s 15 minute intervals (up to a total of 96) of a DS1. Synt ax: status {ds1-addr} performance history Exampl e: status a:1 p ...

  • Carrier Access Network Device Axxius 800 - page 335

    Axxiu s 800 - R elease 2.2 5-23 5 CLI Comman ds stat us statu s (ds3) Use the sta tus (ds3 ) command to display the curren t status of the specified DS3. Synt ax: status {ds3-addr} Exampl e: status a:1 > status a:1 SLOT A: Status for DS3 1 DS1 1: Status for DS3 1: Receive: Loss of Framing Transmit: Traffic Loopback: OFF {ds3-addr} In the form of ...

  • Carrier Access Network Device Axxius 800 - page 336

    5-23 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us status (ds3) performance Use the status (ds3) performance command to display the performance stat istics for the current (15 min) and previo us (15 min, hou r and day) i nformatio n of a DS3. Synt ax: status {ds3-addr} performance > status a:1 performan ce SLOT A: Performance Statistics for ...

  • Carrier Access Network Device Axxius 800 - page 337

    Axxiu s 800 - R elease 2.2 5-23 7 CLI Comman ds stat us statu s (ds3) performance history Use the status (ds3) performance history command to d isplay performan ce statistics for the current 15 minute interval and all previou s 15 minute intervals (up to a total of 96) of a DS1. Synt ax: status {ds3-addr} performance > status a:1 performan ce hi ...

  • Carrier Access Network Device Axxius 800 - page 338

    5-23 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s eq uipment Use the status equipmen t command to display current equ i pment information of th e Axxius 800. Synt ax: status equipment [slot] Exampl e: status equipment Axxius> status equipme nt CardType St atus SW Vers CLEI SLOT P1 +24 V He althy SIPUMR0DAA SLOT P2 Card not inst all ...

  • Carrier Access Network Device Axxius 800 - page 339

    Axxiu s 800 - R elease 2.2 5-23 9 CLI Comman ds stat us Exampl e: status equipment 3 The example with display the status of th e card in s lot 4. In this example a TSR card is in this slot. > status equipment 3 SLOT 3 CardType: TS Rx4 Status: Pr esent SW Revision: 1. 30H BootCode Version: 2. 22 FPGA Revision: 1. 01 CLEI: SI L1UW0EAA [slot] If a ...

  • Carrier Access Network Device Axxius 800 - page 340

    5-24 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us sta tus ( fxsPS or fxsPS M) Use the statu s (fxsPS or FXS PSM) to d isplay the current near -end line status of the sp ecified FXS PS or FXS PS card wit h modem. Synt ax: status {fxsPS-addr|fxsPSM-addr} Exampl e: status 4:1 The ex am ple d ispla ys st atus of po rt 1 ( FXS PS) on slot 4 . > ...

  • Carrier Access Network Device Axxius 800 - page 341

    Axxiu s 800 - R elease 2.2 5-24 1 CLI Comman ds stat us statu s lsprot ect Use the st atus lspr ote ct comman d to display the curren t status of the low speed protection cards. Synt ax: status lsprotect Exampl e: status lsprotect > status lsprotect Low Speed Protection Status: Low Speed Protection Global Service Enable: ENABLED Low Speed Protec ...

  • Carrier Access Network Device Axxius 800 - page 342

    5-24 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (ocudp) Use the stat us (o cu dp) command to displaystatus for self test and loopbacks. Synt ax: status {ocudp-addr} Exampl e: status 2:1 SLOT 2: Status for OCUDP Port 1: Selftest: Results as of 23:25:4 8 01/07/2001 Datapath: PASS FPGA: PASS OCU: PASS OCU Manual Loopbac k: NONE CSU Man ...

  • Carrier Access Network Device Axxius 800 - page 343

    Axxiu s 800 - R elease 2.2 5-24 3 CLI Comman ds stat us statu s (ocudp) performance Use the stat us (o cudp) performance comman d to display perf ormance statistics for the curren t 15 minu te interv al, previ ous 15 minu te inte rval, prev ious 1 hour interv al, and for the previ ous day. Synt ax: status {ocudp-addr} performance Exampl e: status 2 ...

  • Carrier Access Network Device Axxius 800 - page 344

    5-24 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us status (ocudp) performance history Use the stat us (ocu dp) per form an ce hi story command to disp lay performance statistics f or the current 15 minute interval and all previou s 15 minute intervals (up to a total of 96). Synt ax: status {ocudp-addr} performance history Exampl e: status 2:1 ...

  • Carrier Access Network Device Axxius 800 - page 345

    Axxiu s 800 - R elease 2.2 5-24 5 CLI Comman ds stat us statu s (rout er) status (router) al arms Use the statu s (r outer ) al arm s command to d isplay the current alar m log from the specified TSR card. Synt ax: status {tsr_card-addr} alarms Exampl e: status 5 alarms ROUTER BLADE ALARM LOG REPORT Slot-5 Time Mess age Count Jan 4 22:26:47.0 Ethe ...

  • Carrier Access Network Device Axxius 800 - page 346

    5-24 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us status (router) events Use the status (router) events command to display the curren t event log from the specified Router card. Synt ax: status {rtr_card-addr} events Exampl e: status 5 events > status 5 events ROUTER BLADE EVENTS LOG REPORT Slot-5 Time Me ssage Count Jan 10 0:56:44.8 Down ...

  • Carrier Access Network Device Axxius 800 - page 347

    Axxiu s 800 - R elease 2.2 5-24 7 CLI Comman ds stat us status (router) ip address table Use the stat us ( rou ter) ip ad dress tab le command to display the current IP address table for the specified TSR card. Synt ax: status {tsr_card-addr} ip address table ["profile-name"] Exampl e: status 5 ip address table > status 5 ip addres s t ...

  • Carrier Access Network Device Axxius 800 - page 348

    5-24 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us status (router) ip network table Use the status (router) ip networ k table command to d isplay the cu rrent table of learned IP Networks for the specified interface o n the Router card. Synt ax: status {rtr_card-addr} ip network table ["profile-name"] Exampl e: status 5 ip network ta ...

  • Carrier Access Network Device Axxius 800 - page 349

    Axxiu s 800 - R elease 2.2 5-24 9 CLI Comman ds stat us status (router) ipx network table Use the status (r outer) i px netwo rk table command to display the current table of learned IPX Networks for the specified interface on the Router card. Synt ax: status {rtr_card-addr} ipx network table ["profile-name"] Exampl e: status 5 ipx networ ...

  • Carrier Access Network Device Axxius 800 - page 350

    5-25 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us status (router) ipx server table Use the status (r outer) ipx server table command to display the cur rent table of learned IPX Servers for the specified interface on the Rout er card. Synt ax: status {rtr_card-addr} ipx server table ["profile-name"] Exampl e: status 4 ipx server tab ...

  • Carrier Access Network Device Axxius 800 - page 351

    Axxiu s 800 - R elease 2.2 5-25 1 CLI Comman ds stat us status (router) mac address ta ble Use the status (router) mac address table command to display the current table of learned MAC Addresses f or the specified interface o n the Router card . Synt ax: status {rtr_card-addr} mac address table ["profile-name"] Exampl e: status 5 mac addr ...

  • Carrier Access Network Device Axxius 800 - page 352

    5-25 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us status (router) per formance Use the status (r outer) performance comman d to display the current runtime statis tics from the sp ecified Router card. Synt ax: status {rtr_card-addr} performance Exampl e: status 5 performance ROUTER BLADE PERFORMANCE REPORT Slot-5 Run-time Statistics fo r Axxi ...

  • Carrier Access Network Device Axxius 800 - page 353

    Axxiu s 800 - R elease 2.2 5-25 3 CLI Comman ds stat us statu s (rout er-lan ) Use the status (router-l an) comman d to display the cu rrent Router status information. Synt ax: status {rtr_lan-addr) Exampl e: status 3:1 The exampl e displays status of the Router card in slot 3. > status 3:1 SLOT 3: Status for TSR Card Run Status: Running PORT 1 ...

  • Carrier Access Network Device Axxius 800 - page 354

    5-25 4 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (rout er-trun k) Use the stat us (router-tru nk) command to display the current status information for the specified Trun k on the Router card . Synt ax: status {rtr_trunk-addr) Exampl e: status 3:1:1-4 > status 3:1:1-4 SLOT 3: Status for TSR 1 Trunk 1: Link Alarm: NO SLOT 3: Status ...

  • Carrier Access Network Device Axxius 800 - page 355

    Axxiu s 800 - R elease 2.2 5-25 5 CLI Comman ds stat us statu s ses sions Use the status se ssions comma nd to display the current st atus of all active CLI sessio ns. Synt ax: status sessions Exampl e: status sessions > status sessions Session User Login Port ------- ---- ---------- * TELNET1 paul 192.168.1.1 * indicates current se ssion ...

  • Carrier Access Network Device Axxius 800 - page 356

    5-25 6 Axxius 80 0 - Rel ease 2.2 CLI Comman ds stat us statu s (v54 ) Use the stat us (v 54) to di splay the current near-end line status of the V.5 4 card. Synt ax: status {v54-addr} Exampl e: status 3:all The exampl e displays status of all ports (V.54) on sl ot 3. > status 3:all SLOT 3: Status for V35 PORT 1 : DCD: Low CTS: Low DSR: Low RTS: ...

  • Carrier Access Network Device Axxius 800 - page 357

    Axxiu s 800 - R elease 2.2 5-25 7 CLI Comman ds store store The st ore command is used t o upload a s oftware fi le from a d efined slot to a def ined locatio n on a PC, v ia TFTP. Currently uploads for general use are only permitted for the Controller and TSR card configuration files . Synt ax: store {number} tftp {ip-addr} {"file-name"} ...

  • Carrier Access Network Device Axxius 800 - page 358

    5-25 8 Axxius 80 0 - Rel ease 2.2 CLI Comman ds switch switc h switc h ac tivei mage Use the switch activeimage com mand to switch the active with the backup application images stored in a C ontroller or Router car d. Synt ax: switch [rtr_card-addr] activeimage Exampl e: switch activeimage > switch activeimage Do you really want to do this? y OK ...

  • Carrier Access Network Device Axxius 800 - page 359

    Axxiu s 800 - R elease 2.2 5-25 9 CLI Comman ds switch switch (ds3) Use the switch (d s3) command to switch to the standby DS3 por t. Note: for redundant Axxius s ystems only. Synt ax: switch {ds3-addr} Exampl e: switch a:1 > switch a:1 Do you really want to do this? y OK {ds3-addr} In the form of {slot port}: slo t A for the contro ller card po ...

  • Carrier Access Network Device Axxius 800 - page 360

    5-26 0 Axxius 80 0 - Rel ease 2.2 CLI Comman ds telnet telnet telnet (rout er) Use the telnet (router) co mmand to establish a Telnet session from the Axxius 800 CLI to the Router card menu-driv en user interface. Synt ax: telnet {rtr_lan-addr} Exampl e: telnet 3 The example will T elnet into a TSR in Slot 3. > telnet 3 Connected. Escape chara c ...

  • Carrier Access Network Device Axxius 800 - page 361

    Axxiu s 800 - R elease 2.2 5-26 1 CLI Comman ds trace route trace r oute tracert (router ) Use the tracert (router) command to invoke a Trace Route to a host device on a network of a particular TSR Router. Trace Route responses will be returned to user screen as each hop host device resp onse packet is r eceived or the timeout re turn data is provi ...

  • Carrier Access Network Device Axxius 800 - page 362

    5-26 2 Axxius 80 0 - Rel ease 2.2 CLI Comman ds trace route {ip-addr |"domain-name"} [t ype] [src-i p] This optional parameter, only applies it [ type] is set to ICMP. This defines the source IP address in the ICMP echo request an d must be one of the router interface I P addresses. Default is to use the IP address of the interface from w ...

  • Carrier Access Network Device Axxius 800 - page 363

    C HAPTER DS1 Controller Card In this Chapter n Overview n Feature s n Technic al Sp eci fic atio ns n Co nfigurat ion n Bu ilt-In Ca rd Handles n LEDs ...

  • Carrier Access Network Device Axxius 800 - page 364

    6-2 Axxius 800 - Release 2 .2 DS1 Cont roller Card Overview Ove rvi ew The Quad po rt DS1 Contr oller ca rd drives t he Axxius 800 Access Int egrat ion Platform, deli vering a cost- effecti ve, compac t soluti on enab ling wire less s ervic e provider s to opti mize cell sit e access faci lities , resc ue up t o 35% of st rande d cell sit ba ndwidt ...

  • Carrier Access Network Device Axxius 800 - page 365

    Axxiu s 800 - R elease 2.2 6-3 DS1 Control ler Card Feat ur es Features l Rescues u p to 35% or more of network ban dwidth c ommonly wast ed at the cell site or when pr oviding fr actional T1 ser vice l Provides full , non-bl ocking DS0 cr oss-c onnect con necti vity be tween the DS1 Contr oller ca rd and a ny of the e ight s ervice c ard sl ots l ...

  • Carrier Access Network Device Axxius 800 - page 366

    6-4 Axxius 800 - Release 2 .2 DS1 Cont roller Card Technical Specifica tions Tech nica l Sp ecifications Product Includes l Built- in non-blo cking 1/ 0 Digital Cross-co nnect S ystem for up to 36 T1 ports l Robbed- bit (voi ce) and cl ear c hannel (data) s ignaling on the s ame DS1 l Inte gral quad T1 port s that support d rop-an d-insert appli ca ...

  • Carrier Access Network Device Axxius 800 - page 367

    Axxiu s 800 - R elease 2.2 6-5 DS1 Control ler Card Technical Specificatio ns Management l Local - RS- 232 craft por t inte rface dri ves up to 50 ft . (15.24 m) cab le, and provid es a Command Lin e Inte rface (CLI ) using ASCI I ter minal or PC wi th term inal emulati on soft ware, modem usi ng XMODEM or PPP sessi ons l Remote - 10 /100Base-TX E ...

  • Carrier Access Network Device Axxius 800 - page 368

    6-6 Axxius 800 - Release 2 .2 DS1 Cont roller Card Technical Specifica tions Service Inte rfaces Supported l Dual V.35/.5 4 Servi ce card ( hardened) l FXO Voice Ser vice c ard l ISDN BRI Servi ce card l OCU-DP Servic e card l Quad DS1 ADPCM Servi ce card (h ardene d) l Quad T1 Se rvice ca rd (ha rdened) l Single Cha nnel POTS Servic e card (harden ...

  • Carrier Access Network Device Axxius 800 - page 369

    Axxiu s 800 - R elease 2.2 6-7 DS1 Control ler Card Technical Specificatio ns Alarms l Three vi sible alarm outp uts, cr itic al, major a nd minor l Three aud ible a larm output s, crit ical, major and min or l Alarm Cu t-Off for audib le alarm ou tputs l Ten ex ternal a larm in puts (use r defi nable) l Alarm c ontacts a ccessibl e fro m external ...

  • Carrier Access Network Device Axxius 800 - page 370

    6-8 Axxius 800 - Release 2 .2 DS1 Cont roller Card Contr oller Active and Stan dby Controller Active and Standby The Axxi us 800 can f unction f ully with a sing le Control ler car d, however Cont roll er redundan cy is a vailable with tw o like Cont rollers (DS1 or DS3) i nstal led. When two Contr ollers ar e inst alled in a sys tem, one is always ...

  • Carrier Access Network Device Axxius 800 - page 371

    Axxiu s 800 - R elease 2.2 6-9 DS1 Control ler Card Config uration Configuration Options o n the Qua d DS1 Controll er ca rd are se t by th e Command Line Inte rface (CLI) . Note: t he facepl ate s tate DS1/ E1 Controll er, the E1 fea ture is not suppor ted on this rel ease. CLI Commands The fo llowing co mmands are used t o configur e the Qu ad DS ...

  • Carrier Access Network Device Axxius 800 - page 372

    6-10 Axxius 80 0 - Rele ase 2.2 DS1 Cont roller Card Built-In Card Handles Built-In Card Handle s The Cont roller card i s designe d with a handle bui lt in to the faceplat e to a ssist i n the remo val of th e ca rd f rom the cha ssis . Th is ha nd le sl ides ou t aw ay fr om the uni t, crea ting a han dle fo r a mo re effec tive grip. LEDs The DS ...

  • Carrier Access Network Device Axxius 800 - page 373

    C HAPTER DS3 Controller Card In this Chapter n Overview n Feature s n Technic al Sp eci fic atio ns n Co nfigurat ion n Bu ilt-In Ca rd Handles n LEDs ...

  • Carrier Access Network Device Axxius 800 - page 374

    7-2 Axxius 800 - Release 2 .2 DS3 Cont roller Card Overview Ove rvi ew The Dua l port DS3 Control ler car d drives the Axxi us 800 Access Int egrat ion Platform, deli vering a cost- effecti ve, compac t soluti on enab ling wire less s ervic e provider s to opti mize cell sit e access faci lities , resc ue up t o 35% of st rande d cell sit ba ndwidt ...

  • Carrier Access Network Device Axxius 800 - page 375

    Axxiu s 800 - R elease 2.2 7-3 DS3 Control ler Card Feat ur es Features l 2 DS3 por ts built into t he Contr oller del iver bandwidth t o the r esiden t cell si te fo r serv ice deli very ap plicati ons and distrib ute re sidual ba ndwidth to remot e cell site s l Rescue s up to 35% of networ k bandwidth c ommonly st randed at the ce ll site s l Pr ...

  • Carrier Access Network Device Axxius 800 - page 376

    7-4 Axxius 800 - Release 2 .2 DS3 Cont roller Card Technical Specifica tions Management l Local - RS-232 craft por t interf ace dri ves up to 50 ft. (15 .24 m) cab le, and provid es a Command Lin e Inte rface (CLI ) using ASCI I ter minal or PC wi th term inal emulati on soft ware, modem usi ng XMODEM or PPP sessi ons l Remote - 10/100Base-TX E the ...

  • Carrier Access Network Device Axxius 800 - page 377

    Axxiu s 800 - R elease 2.2 7-5 DS3 Control ler Card Technical Specificatio ns Service Inte rfaces Supported l Dual V.35/.5 4 Servi ce card ( hardened) l FXO Voice Ser vice c ard l ISDN BRI Servi ce card l OCU-DP Servic e card l Quad DS1 ADPCM Servi ce card (h ardened) l Quad T1 Se rvice ca rd (ha rdened) l Single Cha nnel POTS Servic e card (harden ...

  • Carrier Access Network Device Axxius 800 - page 378

    7-6 Axxius 800 - Release 2 .2 DS3 Cont roller Card Technical Specifica tions Testing and Diagnostics l Suppor ts mainte nance s ignals sp ecified i n ANSI T1.40 4 (Sectio n 7.1) l Stand ard DS3 line an d payloa d loopbacks l RFC 2496 p erformance histo ry Power Consum ption l 10 W maximum Environment In addi tion to the systems envi ronment r equir ...

  • Carrier Access Network Device Axxius 800 - page 379

    Axxiu s 800 - R elease 2.2 7-7 DS3 Control ler Card Contro ller Active an d Stand by Controller Active and Standby The Axxius 800 can f unction f ully with a sing le Control ler car d, however Cont roll er redundan c y is avai lable with two li ke Cont rollers (DS1 or DS 3) instal led. When two Contro llers ar e install ed in a sys tem, one is alwa ...

  • Carrier Access Network Device Axxius 800 - page 380

    7-8 Axxius 800 - Release 2 .2 DS3 Cont roller Card Contr oller and DS3 Redundancy Con troll er a nd D S3 Re dund ancy Protection Modes The Axxi us 800 can b e provisi oned wit h one or two DS3 Contro ller car ds and conne ctions t o one or two DS3 lines, which wi ll provi de the fol lowing levels of protect ion: l Electron i cs Pro tection – when ...

  • Carrier Access Network Device Axxius 800 - page 381

    Axxiu s 800 - R elease 2.2 7-9 DS3 Control ler Card Contr oller and DS3 Redu ndancy swit ching th e output path s so that t he tran smit path of th e DS3 line is connect ed to the stan dby Control ler. Servi ce interr uptions ( hits) wil l be ta ken on both t he DS3 and lo w- spee d connecti ons dur ing this type of swi tch. However , since the s t ...

  • Carrier Access Network Device Axxius 800 - page 382

    7-10 Axxius 80 0 - Rele ase 2.2 DS3 Cont roller Card Contr oller and DS3 Redundancy Network Protection Mode The networ k mode of prote ction requi res a single Cont roll er with two indepen dent DS3 chann els. The cros s connec ts are set up identic ally for both DS3s. Both re vertive a nd non-r evertiv e modes a re applic able. Two DS3 f ramers ar ...

  • Carrier Access Network Device Axxius 800 - page 383

    Axxiu s 800 - R elease 2.2 7-11 DS3 Control ler Card Config uration Configuration Opti ons on t he DS3 Con tro ller car d are set by th e fo ll owin g C LI c omm and s. CLI Commands The fo llowing co mmands are used t o configur e the DS3 Controlle r card. For detail ed i nf o r m a t i o n on th e se co mm and s , s e e Ch a pt e r 5 , CLI C o m m ...

  • Carrier Access Network Device Axxius 800 - page 384

    7-12 Axxius 80 0 - Rele ase 2.2 DS3 Cont roller Card Built-In Card Handles Built-In Card Handle s The Cont roller card i s designe d with a handle bui lt in to the faceplat e to a ssist i n the remo val of th e ca rd f rom the cha ssis . Th is ha nd le sl ides ou t aw ay fr om the uni t, crea ting a han dle fo r a mo re effec tive grip. LEDs The DS ...

  • Carrier Access Network Device Axxius 800 - page 385

    C HAPTER FXO Voice Card In this Chapter n Overview n Features n Technical Specifi cations n Card Co nfiguratio n - CLI Comma nds - DIP S witch Settings n LEDs n Channel Ass ociated Signaling (CAS) Conversi ons ...

  • Carrier Access Network Device Axxius 800 - page 386

    8-2 Axxius 800 - Release 2 .2 FXO Voice Card Overview Ove rvi ew The FXO Voi ce Serv ice card provide s high -density provis ioning of reli able Fo reign Exchan ge Office ( FXO) or Dir ect Inward Di aling (DID) tele phone servi ces. Eig ht FXO or Dial Pulse Termin ate (DPT) telep hone l ine chann els c an be depl oyed on each FXO Ser vic e ca rd. T ...

  • Carrier Access Network Device Axxius 800 - page 387

    Axxiu s 800 - R elease 2.2 8-3 FXO Voice Card Feat ur es Features l Deliv ers FX O or D ID tele phon e se rvic es f rom T 1 ac ces s ci rcu its l Suppor ts CLASS servi ces incl uding cal ler ID, cal ling party dis connect an d dist inctive ringi ng l Provides up t o 64 FXO or DPT voic e li nes in o ne Axxi us 800 chassis, occupy ing just two rack u ...

  • Carrier Access Network Device Axxius 800 - page 388

    8-4 Axxius 800 - Release 2 .2 FXO Voice Card Technical Specifica tions FXO Signalin g Performance l DC Loop Rang e: > 1600 Ω l oop or gro und sta rt l Ringer Equ ivale ncy Number (REN): 0.4B (AC) l Ringing Vol tage De tection : dete cts Class A ringing f ollows di stinc tive rin ging l FXO DC Resista nce: 100 Ω l Maximum DC: 150 mA l Overvol ...

  • Carrier Access Network Device Axxius 800 - page 389

    Axxiu s 800 - R elease 2.2 8-5 FXO Voice Card Card Co nfigur ation Card Configu ration The FXO voic e card can be c onfigured , to suppor t either FXO loop start or FXO ground start signal ing, with v arious t ransmit and recei ve at tenuatio n optio ns. CLI Commands The f ollowing commands a re used to con figure t he FXO c ard. For d etail ed inf ...

  • Carrier Access Network Device Axxius 800 - page 390

    8-6 Axxius 800 - Release 2 .2 FXO Voice Card DIP Switc h Settings DIP Switch Settings The FXO ca rd DIP switc hes are no t func tional on the Axxi us 800 p latform. LEDs Each FXO p ort on a ca rd has its own LED, des cribed i n the tabl e below. State Loop Star t Mea ni ng Ground Start Meaning Dial Pulse Te rmination Mean ing Off N/A Idle (t ip ope ...

  • Carrier Access Network Device Axxius 800 - page 391

    Axxiu s 800 - R elease 2.2 8-7 FXO Voice Card Chann el Associa ted Signal ing (CAS) C onversi ons Channel As sociated Signa ling (CAS) Conversions Cross-c onnects are done a t a DS0 leve l. The f ollowing r ules need to be ke pt in mind while per forming cr oss-c onnects f or a FXO voi ce card. LS = Lo op Sta rt DPT = dia l Pulse T erminatio n GS = ...

  • Carrier Access Network Device Axxius 800 - page 392

    8-8 Axxius 800 - Release 2 .2 FXO Voice Card Channel Associ ated Si gnaling ( CAS) Co nversion s ...

  • Carrier Access Network Device Axxius 800 - page 393

    C HAPTER ISDN BRI Card In this Chapter n Overview n Features n Technical Specifi cations n Card Co nfiguratio n - CLI Comma nds n LEDs n Connecto r Pinouts - Wire-Wrap Pinout 2 Wire Services ...

  • Carrier Access Network Device Axxius 800 - page 394

    9-2 Axxius 800 - Release 2 .2 ISDN BRI Card Overview Ove rvi ew The ISDN BRI Ser vice Cards enable se rvice pro viders and ente rprises t o deploy high- densi ty, stand ards- based, ISDN Bas ic Rate Interf ace (BRI ) servic es over one or mo re T1 or DSL access lines using TDM or ATM transport. ISDN voice, data , and real-t ime vide o applicat ions ...

  • Carrier Access Network Device Axxius 800 - page 395

    Axxiu s 800 - R elease 2.2 9-3 ISDN BRI Card Feat ur es Features l Enabl es carri ers to eco nomically bundl e ISDN with all other servi ces at 64 Kbp s or 128 Kbps over T1 a ccess li nes l Conf ig ura ble as eith er Li ne U nit L ine T erm ina l (LU LT) fo r inte r faci ng to ISD N switc h in ter fa ces at th e ce ntra l of fice , or Lin e Uni t N ...

  • Carrier Access Network Device Axxius 800 - page 396

    9-4 Axxius 800 - Release 2 .2 ISDN BRI Card Technical Specifica tions Management l Standar d ISDN SNMP MIB support ed Network Interface l 3 DS0 mode: Uses 3 cont iguous DS0 chann els per I SDN BRI channe l on T1 Network Standards l Telc ordia TR-N WT-000397 ( 1993) l Telc ordia TR-TSY- 000821 (1 991) l Telc ordia TR-TSY- 000829 (1 989) l ANSI T1.60 ...

  • Carrier Access Network Device Axxius 800 - page 397

    Axxiu s 800 - R elease 2.2 9-5 ISDN BRI Card Technical Specificatio ns Power l Maximum power i nput: 6 W (8 port) l Soli d- stat e fu sele ss p rot ecti on Environment In a ddit ion to the sys tem s e nvi ron men t req ui rem ent s, th e fo llo win g a pplie s t o th e IS DN BRI card. Fo r additiona l inform ation se e Inst allatio n Environment , ...

  • Carrier Access Network Device Axxius 800 - page 398

    9-6 Axxius 800 - Release 2 .2 ISDN BRI Card Card Con figur ati on Card Conf iguration BRI card op tions are se t with th e Command Line Inte rface (CLI). F or additi onal informat ion on these commands , see Chapter 5, CLI Commands . CLI Commands l connect Creates two-way c onnectio ns betwe en channel s l disconnect Rem ove s a c onn ect ion crea ...

  • Carrier Access Network Device Axxius 800 - page 399

    Axxiu s 800 - R elease 2.2 9-7 ISDN BRI Card LEDs LEDs There is an LED for each ISDN BRI o n a car d. The funct ion for ea ch LED is listed belo w: State Desc rip tio n Off Line U-interface is attempting sy nchronization, or BR I is out of service. Red Line alarm (LOS or self test failure) Yellow ES or SES has occu rred. Flashing yello w Line U-int ...

  • Carrier Access Network Device Axxius 800 - page 400

    9-8 Axxius 800 - Release 2 .2 ISDN BRI Card Connect or Pinou ts Connec tor Pi nou ts Wire- Wrap Pinout 2 Wire Services The f ollowing pinout applies to t he wire-wrap pi nout for the s lot o f the IS DN BRI car d. Wire-Wrap Pi ns Descri ption T1 Channel 1 Tran smit Tip R1 Channel 1 Transm it Ring T2 Channel 2 Tran smit Tip R2 Channel 2 Transm it Ri ...

  • Carrier Access Network Device Axxius 800 - page 401

    C HAPTER OCU- DP Card In th is C hapter n Overview n Features n Technical Specifi cations n Card Confi guration - CLI Co mma nds - Ba sic Set up n LEDs n Jump er Se ttin gs n Alarms n Line Ra tes/Line Len gths n Connect or Pinout s - DDS RJ-48S - Wire -Wrap Pinout 4 Wire Services ...

  • Carrier Access Network Device Axxius 800 - page 402

    10-2 Axxius 80 0 - Releas e 2.2 OCU-DP Card Overview Ove rvi ew The Si ngle Port and Quad Port all- rate OCU-DP Ser vice Cards provi de electr ical and phys ical t ermin ati on o f th e 4 -wi re Di gita l D ata Ser vice (D DS) that is t ra diti onal ly u sed to inte rconne ct lower- speed s erial s ynchronous Da ta Ter minal Equipme nt (DTE) device ...

  • Carrier Access Network Device Axxius 800 - page 403

    Axxiu s 800 - R elease 2.2 10-3 OCU-DP Card Overview Customer Premi se Application In th is model, the c arrier de ploys t he Axxius 8 00 in conjunct ion with DDS DSU/CSUs to provi de sta ndards-ba sed DDS ac cess for c ustomer da ta ter minal n eeds. In es sence, the Axxius 800 i ntegra tes the DDS capabi lities that were tradi tion ally served by ...

  • Carrier Access Network Device Axxius 800 - page 404

    10-4 Axxius 80 0 - Releas e 2.2 OCU-DP Card Overview SS7 Bac khaul Applicat ion In t his appl icatio n, the carr ier uses the OCU to transfer sig naling a nd cal l in format ion between MSCs. Axxius 8 00 ...

  • Carrier Access Network Device Axxius 800 - page 405

    Axxiu s 800 - R elease 2.2 10-5 OCU-DP Card Feat ur es Features l Provides availabl e base band data r ates fr om 2.4 to 7 2 Kbps l Suppor ts primar y and s econdary c hannel service s, 64K cl ear c hannel se rvice , and 4-wi re S wit che d-5 6 se rvic e l Complies wi th AT&T Pub. 62310 l Off ers Bipo lar V iol atio n (B PV) , L oss of F rame ( ...

  • Carrier Access Network Device Axxius 800 - page 406

    10-6 Axxius 80 0 - Releas e 2.2 OCU-DP Card Technical Specifica tions Network Interface l Each OCU po rt DS0 cros s-connect ed to T1 por t Loopbacks OCU, CSU and DSU: l Manual loopbacks a ctivate via CLI l Non-lat ching l oopbacks ac tivat e via net work cod e l Latc hing lo opbacks act ivat e via netwo r k code Clocking l Loop -tim ed fro m any T1 ...

  • Carrier Access Network Device Axxius 800 - page 407

    Axxiu s 800 - R elease 2.2 10-7 OCU-DP Card Card Co nfigur ation Card Conf iguration OCU-DP card options are set with th e Command Line Interface (CLI ). For addit ional info rmation on t hese c ommands, see Chapter 5, CLI Comman ds . CLI Commands Configuration Commands l set lsback up Set up OCU-DP port baud rate l set (ocudp) loopde tect Set OCU- ...

  • Carrier Access Network Device Axxius 800 - page 408

    10-8 Axxius 80 0 - Releas e 2.2 OCU-DP Card Card Con figur ati on Basic Setup Command De sc rip tion set {ocudp-addr} baud {2400|4800|9600|19200|38400| 56000*|64000} Set the OCU-DP Baud rate. Where ocu dp-addr = {sl ot:port} o f the OCU-DP card to apply s ettings t o. set {ocudp-addr} up Set the OCU-DP port 1 up. show {ocudp_card-addr} Show the O C ...

  • Carrier Access Network Device Axxius 800 - page 409

    Axxiu s 800 - R elease 2.2 10-9 OCU-DP Card LEDs LEDs There are two LEDs for each channel on the OCU-DP card . The funct ion for ea ch LED is li sted bel ow: State Desc ription Yellow Flick ering ALL B oot Software in control. Green (walking d own) Red (walking up) ALL Appli cation So ftware in co ntrol (repeated 3.5 times ). Red, slow flash ALL In ...

  • Carrier Access Network Device Axxius 800 - page 410

    10-1 0 Axxius 80 0 - Releas e 2.2 OCU-DP Card Jumper Sett ings Jumper Settings The P1 a nd P2 Jumpers are de faulted t o RJ-48S, whi ch are the set of pins nearest t he bott om of t he serv ice card. W ith the jumper in this position the signa ls are routed to t he RJ-48S connector (s) on the f ace of the card. To route the signa ls to the 25-pi n ...

  • Carrier Access Network Device Axxius 800 - page 411

    Axxiu s 800 - R elease 2.2 10-1 1 OCU-DP Card Alarms Alarms The OCU-DP c ards and s upporting Control ler Soft ware will support the foll owing ala rms : Alarm/ Event Severi ty Category De scriptio n Clear M echanis m (a lar ms on ly) Card Detect Information Equipment OCU-DP car d inser ted Card Remo ved Information Equipment OCU-DP card removed Ou ...

  • Carrier Access Network Device Axxius 800 - page 412

    10-1 2 Axxius 80 0 - Releas e 2.2 OCU-DP Card Line Rates/Line Len gths Line Rate s/Li ne Len gt hs All leng ths were measure d to meet a BER of 10 -7 with up to 45 dB of cabl e atte nuation at the Ny quist frequency for 56, 64 and 72 Kbps, and 40 dB all ot her rate s. Servi ce Data Rate Primary Cha nnel / Secondary Channel Max. Loop Distanc e (24 A ...

  • Carrier Access Network Device Axxius 800 - page 413

    Axxiu s 800 - R elease 2.2 10-1 3 OCU-DP Card Conn ector Pinouts Connec tor Pi nou ts The OCU-DP is p art of th e networ k, it conn ect to customer e quipment. DDS RJ-48S The pinout for RJ -48S fe male is as follows: Note : Th e ab ove li st ed f uncti ons are rela tive to t his p ort . Pin Function Desc ri pti on 1 Receives Data (R-1) From Custo m ...

  • Carrier Access Network Device Axxius 800 - page 414

    10-1 4 Axxius 80 0 - Releas e 2.2 OCU-DP Card Connect or Pinou ts Wire- Wrap Pinout 4 Wire Services The f ollowing pi nout a pplies t o the wire-wrap pinout fo r the slot of the OCU-DP c ard. Wire -Wrap Pins T1 Name D esc rip tio n 1RX Port 1 Receive Ring Receive from DS1 n etwork Receive Tip Receive from DS1 n etwork 1TX Trans mit Ring To DS1 netw ...

  • Carrier Access Network Device Axxius 800 - page 415

    C HAPTER Single Channel POTS Cards In this Chapter n Overvi ew n Features n Technical Speci ficati ons n Card Con figuration - CLI Commands n Connector Pin outs n LEDs n Basi c Co nfigu rat ion ...

  • Carrier Access Network Device Axxius 800 - page 416

    11-2 Axxius 80 0 - Releas e 2.2 Single Chann el POTS Cards Overview Ove rvi ew A Single Channel POTS card provi des wire less serv ice provide rs a st andar d FXS voice ci rcuit for communic ations, wi th the operatio ns suppo rt group under conditi ons where the ce ll sit e radios a re bei ng serv iced. The Si ngle Cha nnel POTS car d feature s a ...

  • Carrier Access Network Device Axxius 800 - page 417

    Axxiu s 800 - R elease 2.2 11-3 Single Ch annel POTS C ards Technical Specificatio ns Tech nica l Sp ecifications Controller Software Requir ed l Release 1.0 or hi gher is r equired f or the POTS Service cards FXS Transmission Performance l Retu rn L oss : ERL > 28 dB , SR L > 20 dB wi th re spe ct to 90 0 Ω + 2.16µ F l Transhybr id Loss : ...

  • Carrier Access Network Device Axxius 800 - page 418

    11-4 Axxius 80 0 - Releas e 2.2 Single Chann el POTS Cards Technical Specifica tions Physical l POTS conne ctions a re through front panel RJ- 11 l Dimensions : 3.5 i n. (H) x 0.75 in. (W) x 11.25 in. (D) 8.9 cm (H) x 1.9 cm (W) x 28. 6 cm (D) l Weight: Si ngle Ch annel POTS - 5. 1 oz. (0.14 kg ) Single Chan nel POTS w/Modem - 6 .0 oz. (0 .17 kg) E ...

  • Carrier Access Network Device Axxius 800 - page 419

    Axxiu s 800 - R elease 2.2 11-5 Single Ch annel POTS C ards Built-In Ca rd Handles Built-In Card Handle s The Singl e Channel POTS cards a re design ed with a handle bu ilt i nto the f aceplat e to assi st in t he remov al of the c ard fr om the chassis. This handle s lides out away f rom the uni t, cre atin g a h an dle f or a more ef fect ive gri ...

  • Carrier Access Network Device Axxius 800 - page 420

    11-6 Axxius 80 0 - Releas e 2.2 Single Chann el POTS Cards Connect or Pinou ts Connec tor Pi nou ts RJ-11 Connector There is one RJ- 11 (female ) connecto r on th e front of the POTS c ard and two RJ-11 conne ctors on t he POTS car d with mo dem. The pi nouts are as fol lows: Pin Name Descri ption 1 n/c Not connected 2 n/c Not connected 3 R Ring 4 ...

  • Carrier Access Network Device Axxius 800 - page 421

    Axxiu s 800 - R elease 2.2 11-7 Single Ch annel POTS C ards LEDs LEDs The POTs ch annel L ED (lef t) stat us is describe d in t he table b elow. The sec ond LE D (rig ht) is a s tatu s LE D f or the MOD EM . State Loop Start Meaning Off Calling Par t y Disconnect Green Idle Red N/ A Yellow Call in progress Flas hing gre en Rin ging State Desc ripti ...

  • Carrier Access Network Device Axxius 800 - page 422

    11-8 Axxius 80 0 - Releas e 2.2 Single Chann el POTS Cards Basic Configur ation Basic Co nfiguration W ARNING! D O NOT IN STAL L TWO S ING LE C HANNEL POTS SERVICE CARDS WITH MODEM IN A A XXI US CHASSIS . I F YOU DO , THE SYST EM WILL HANG . T O RESOLVE , YOU MUST REMOVE BOTH CARDS AN D PLUG ONLY ONE BACK IN . Set Up the Single Channel POTS Line Us ...

  • Carrier Access Network Device Axxius 800 - page 423

    C HAPTER Power Supply In this Chapter n Overview n Features n Technical Speci ficati ons n Input Power n LEDs n Instal ling/Repla cing a Power Supply ...

  • Carrier Access Network Device Axxius 800 - page 424

    12-2 Axxius 80 0 - Releas e 2.2 Power Supply Overview Ove rvi ew The Axxius 800 Power Supply op tions oper ate fro m either 24 VDC or 48 VDC to supply 5V p ower to the Axxius p latform. A s ingle Power Supply is capa ble of poweri ng the ent ire Axxius 800 uni t. Equippi ng the Axxius with tw o Power Suppl ies provide s a simultaneou sly shar ed, r ...

  • Carrier Access Network Device Axxius 800 - page 425

    Axxiu s 800 - R elease 2.2 12-3 Power Supply Technical Specificatio ns Tech nica l Sp ecifications Componen ts l 24 VDC Power Supply l 48 VDC NI48 Power Supply l 48 VDC I48 Power Supply l Cable connector Elect rical I nput Charac teristics Input powe r ful ly isola ted from ci rcuit and ch assis gro und 24 VD C l 24 (21 .0 to 30.0) VDC, + 5 ADC, 12 ...

  • Carrier Access Network Device Axxius 800 - page 426

    12-4 Axxius 80 0 - Releas e 2.2 Power Supply Technical Specifica tions Alarms l Communicates stat us to Contr oller whe n 24 or 48 VDC inp ut voltag e is low Interface Connectors l Rear P CB connector : Axxius 800 backpla ne Environment In ad dition t o the s ystems e nviron ment req uiremen ts, th e foll owing appli es to the Pow er Su pp lies . F ...

  • Carrier Access Network Device Axxius 800 - page 427

    Axxiu s 800 - R elease 2.2 12-5 Power Supply Input P ower Input Po wer The fo llowing gr aphic displays the bac k of th e Axxius cha ssis, with the I nput powe r for the Power Sup ply slot A a nd B noted. ...

  • Carrier Access Network Device Axxius 800 - page 428

    12-6 Axxius 80 0 - Releas e 2.2 Power Supply LEDs LEDs Both powe r supply ca rds have identica l LEDs, as d escribed i n the tabl e be low. LED State Des cript ion DC Input Off D C input missing or f use blown Yellow Und er or over-v oltage Green Valid DC input pres ent Output Voltage Status Off No 5 V output (n either powe r supply operati ng) Red ...

  • Carrier Access Network Device Axxius 800 - page 429

    Axxiu s 800 - R elease 2.2 12-7 Power Supply Instal ling/Rep lacing a Power Sup ply Installin g/Replacing a Power Supply Install a Power Supply The Axxius has red undant Power Supply S ystem ca pabilit y. The unit wi ll r un on one power supply (an d not be redundant ) or ca n have 2 power suppl ies in stalled . 1. Conn ec t the pow er c ord to th ...

  • Carrier Access Network Device Axxius 800 - page 430

    12-8 Axxius 80 0 - Releas e 2.2 Power Supply Insta llin g/Replacin g a Pow er Supp ly ...

  • Carrier Access Network Device Axxius 800 - page 431

    C HAPTER Quad DS1 ADPCM Card In this Chapter n Overview n Featur es n Technical Speci fications n Card Con figuration - CLI Commands - Cross-Connects - Basic Se tup n Jumper Sett ings n Co nnector Pi no uts - RJ-48 Connector n LEDs ...

  • Carrier Access Network Device Axxius 800 - page 432

    13-2 Axxius 80 0 - Releas e 2.2 Quad DS1 ADPCM C ard Overview Ove rvi ew The Quad DS1 ADPCM Service c ard is a component o f the Ax xius 800 Acce ss Integr ation Pla tform. With t he ADPCM Servi ce card, t he Axxiu s 800 provi des an inte llig en t, co mp act devi ce t h at c an comp res s a nd gro om v oic e tr af fic, wh ich inc rea ses bandwi dt ...

  • Carrier Access Network Device Axxius 800 - page 433

    Axxiu s 800 - R elease 2.2 13-3 Quad DS1 ADPCM Card Feat ur es Features l 32 Kbps ADPCM voice co mpression l Suppor ts Clear Channel S ignaling and li ne formatt ing fo r 32 Kbps ADPCM voic e-band sig nals accordi ng to ANSI T1.30 2-1989 l Grooms the voice a nd data mix from sel ectab le channel contr ol optio ns l Suppor ts up to 14 .4 Kbps analo ...

  • Carrier Access Network Device Axxius 800 - page 434

    13-4 Axxius 80 0 - Releas e 2.2 Quad DS1 ADPCM C ard Technical Specifica tions T1 Interface (continued) l Jitte r: meets AT&T Pub . TR-62411 l Soli d-state fuseless overvo ltage and overcurrent li ne pro tection l Channe l status LEDs l Less t han 3 ms signal ing late ncy l Less tha n 10 ms ove rall Axxius 800 sy stem signal ing l atency ADPCM ...

  • Carrier Access Network Device Axxius 800 - page 435

    Axxiu s 800 - R elease 2.2 13-5 Quad DS1 ADPCM Card Technical Specificatio ns Alarms l Support s tandard T1 .403 ala rms l LOS (Loss of Signal), Red, Yellow, Blu e l ESF Per formance Error Count Thres hold l Timing Loss l All alar ms are l ogg ed in an e vent l og l Loss o f power tr iggers minor a larm l Gene rat es S NMP tr aps for alarm ing Test ...

  • Carrier Access Network Device Axxius 800 - page 436

    13-6 Axxius 80 0 - Releas e 2.2 Quad DS1 ADPCM C ard Card Con figur ati on Card Configuration All options on the th is Serv ice card are se t using t he Comman d Line Int erfac e (CLI) . CLI Comman ds The f ollowing c ommands are us ed to confi gure the Quad DS1 ADPCM car d. For d e t a i l e d i n f o r m a t i o n on t h e se c o m m a n d s , s ...

  • Carrier Access Network Device Axxius 800 - page 437

    Axxiu s 800 - R elease 2.2 13-7 Quad DS1 ADPCM Card Card Co nfigur ation l show (adpcm) Disp lay s curr ent s etti ngs for th e A DPC M card ( circ uit ID, u p.do wn, framing, l ine codi ng, line bui ld out, lo op code detec tion, loop bac k, fdl ty pe, ADPCM, ADPCM Map) l show connect a dpcm Displays the co nnections for t he ADPCM port. l show (d ...

  • Carrier Access Network Device Axxius 800 - page 438

    13-8 Axxius 80 0 - Releas e 2.2 Quad DS1 ADPCM C ard Card Con figur ati on Basic Setup Before c onfigu ring the DS1 ADPCM card, th ere ar e some basi cs that ne ed to be consi dered: l All DS0 s to be compr essed res ide on T1 numbe r 1 of the ADPCM card l ADPCM is cap able of t ransporting any combi nation of 64 and 3 2K l All 24 DS0s can be trans ...

  • Carrier Access Network Device Axxius 800 - page 439

    Axxiu s 800 - R elease 2.2 13-9 Quad DS1 ADPCM Card Card Co nfigur ation Cross-Connects It is i mporta nt to note that all t imeslots are cross -connecte d in pa irs. Th e actual p airs that can be cro ss-con nected are dependa nt upon which of the 3 suppor ted mappi ngs are set usi ng the set (ds1 card ) adpcm map command. Map1 l Channels 1-12 and ...

  • Carrier Access Network Device Axxius 800 - page 440

    13-1 0 Axxius 80 0 - Releas e 2.2 Quad DS1 ADPCM C ard Jumper Sett ings Jumper Settings The P2 a nd P3 Jumpers are de faulted t o RJ-48, which are t he set of pins n earest t he conne ctors. In this p osition t he DS1 signa ls (TX a nd RX) are r outed to t he RJ-48 conne ctors on t he face of the c ard, see RJ- 48 Connecto r on page 13-11 for pin o ...

  • Carrier Access Network Device Axxius 800 - page 441

    Axxiu s 800 - R elease 2.2 13-1 1 Quad DS1 ADPCM Card Conn ector Pinouts Connec tor Pi nou ts RJ-48 Connector There are four RJ-48 (fe male) connec tors on the fr ont of t he Quad DS1 ADPCM Card. The pi nouts are as fol lows: Pin Name Descripti on 1 Receive Ring Receive from DS1 network 2 Receive Tip Receive from DS1 network 3 n/c Not connected 4 T ...

  • Carrier Access Network Device Axxius 800 - page 442

    13-1 2 Axxius 80 0 - Releas e 2.2 Quad DS1 ADPCM C ard LEDs LEDs Each c hannel on the Quad DS1 ADPCM card has two LEDs. Th e descr iption of the top LED is shown b elow, th e bottom LED is not used wi th thi s applic ation. State Descri ption Off Off line Green Normal Red Lo ss of Si gnal ( LOS) Yellow Bipolar Vio lation (BPV) Flashing Green Loopba ...

  • Carrier Access Network Device Axxius 800 - page 443

    C HAPTER Quad T1 & Quad DS1/E1 Card In this Chapter n Overview n Features n Technical Speci fications n Card Confi guration - CLI Comma nds n Jumper Settings n Connect or Pinouts - RJ-48 Connector n LEDs ...

  • Carrier Access Network Device Axxius 800 - page 444

    14-2 Axxius 80 0 - Releas e 2.2 Quad T1 & Quad DS1/ E1 Card Overview Ove rvi ew The H ard en ed Qu ad T 1 a nd DS 1/E1 Se rvic e ca rds ena ble wirel ess serv ice pro vid ers to cost -effect ivel y provisi on and ex pand netw ork bandwidt h and gr oom availa ble DS0s onto o ther T1 tri butarie s for opt imal T1 bandwi dth uti lizati on. The car ...

  • Carrier Access Network Device Axxius 800 - page 445

    Axxiu s 800 - R elease 2.2 14-3 Quad T1 & Quad DS1/E1 Card Feat ur es Features l Inte grated T1 CSU fun ctionali ty wit h FCC regist ration f or dir ect conne ction to T1 lines l B8ZS or AMI encoding an d SF (D4) or ESF fr aming l Local, line and payloa d loopbacks l Framin g and coding conver sion be tween T1 por ts l Flexibl e system cl ock t ...

  • Carrier Access Network Device Axxius 800 - page 446

    14-4 Axxius 80 0 - Releas e 2.2 Quad T1 & Quad DS1/ E1 Card Technical Specifica tions Tech nica l Sp ecifications Controller Software Requir ed l Release 1.0 or hi gher is r equir ed for the Quad T1se rvice ca rd T1 Interface l 4 T1 ports ope rati ng at 1.544 Mbps (DS1) or 2.048 Mbps (E1 ) ± 50 bps l Expans ion to 36 T1 ports in a si ngle chas ...

  • Carrier Access Network Device Axxius 800 - page 447

    Axxiu s 800 - R elease 2.2 14-5 Quad T1 & Quad DS1/E1 Card Technical Specificatio ns Clocking l Loop-t imed from an y T1 l External from BITS cl ock in put (t1.101 , t1.102 signal ty pe) l Rever tive or no n-revert ive ( provis ionable c lock switc hing provi des aut omatic backu p to second ary T1 should t he primary T1 fa il l Operates as a S ...

  • Carrier Access Network Device Axxius 800 - page 448

    14-6 Axxius 80 0 - Releas e 2.2 Quad T1 & Quad DS1/ E1 Card Technical Specifica tions Envi ron ment In addition to t he sys tems e nvironme nt re quireme nts, th e foll owing a pplie s to the Quad T1 ( har den ed) card . Fo r add iti ona l i nfo rmati on s ee Inst allation Enviro nment on page 2-3 . l Oper at ing te mp erat ure ran ge o f the Q ...

  • Carrier Access Network Device Axxius 800 - page 449

    Axxiu s 800 - R elease 2.2 14-7 Quad T1 & Quad DS1/E1 Card Card Co nfigur ation Card Configu ration All op tio ns o n th e t his ca rd are set u sin g th e Com man d L ine Interf a ce (CL I) . CLI Commands The fo llowing co mmands a re used t o configur e the Qu ad T1 card. Fo r deta iled i nf o r m a t i o n on th e se co mm and s , s e e Ch a ...

  • Carrier Access Network Device Axxius 800 - page 450

    14-8 Axxius 80 0 - Releas e 2.2 Quad T1 & Quad DS1/ E1 Card Jumper Sett ings Jumper Settings The P2 a nd P3 Jumpers are de faulted t o RJ-48, which are t he set of pins n earest t he conne ctors. In this p osition t he DS1 signa ls (TX a nd RX) are r outed to t he RJ-48 conne ctors on t he face of the c ard, see RJ- 48 Connecto r on page 14-9 f ...

  • Carrier Access Network Device Axxius 800 - page 451

    Axxiu s 800 - R elease 2.2 14-9 Quad T1 & Quad DS1/E1 Card Conn ector Pinouts Connec tor Pi nou ts RJ-48 Connector There ar e four RJ-48 (fema le) connec tors on t he front of the Quad T1 and DS1/E1 Cards. The pi nouts are as fol lows: Pin Name Descripti on 1 Receive Ring Receive from DS1 network 2 Receive Tip Receive from DS1 network 3 n/c + N ...

  • Carrier Access Network Device Axxius 800 - page 452

    14-1 0 Axxius 80 0 - Releas e 2.2 Quad T1 & Quad DS1/ E1 Card LEDs LEDs Each c hannel on t he card ha s two LEDs. T he descri ption o f the top LED is sho wn belo w, the botto m LED is not used wi th this a pplicati on. State Descri ption Off Off line Green Normal Red Lo ss of Si gnal ( LOS) Yellow Bipolar Vio lation (BPV) Flashing Green Loopba ...

  • Carrier Access Network Device Axxius 800 - page 453

    C HAPTER Terminal Server Router Card In this Chapter n Overview n F eatures n Technic al Sp eci ficat io ns n Card Co nfigu ration - CLI Commands n Connector Pinou t n LEDs ...

  • Carrier Access Network Device Axxius 800 - page 454

    15-2 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Overview Ove rvi ew The Q ua d-P ort T erm ina l Ser ver Ro uter (TS R) card co mbin es th e pe rfo rm anc e an d expan d abilit y of a sel ectable f our-port RS-232 a nd 10/100Bas e-TX Ethe rnet swit ch with dedicated routi ng functi onali ty in a low-cost solut ion to hel p wirel ess se ...

  • Carrier Access Network Device Axxius 800 - page 455

    Axxiu s 800 - R elease 2.2 15-3 Terminal Server Router Card Feat ur es Features l Enab les rem ote ma nag emen t of cell si te re sour ce s l Suppl ies 4 sel ectable RS- 232 synchr onous or 10/100Base- TX Ethernet conne ctions pe r card l Suppor ts up to 8 Router c ards per Axxius 80 0 chassis - Multi-point networki ng with u p to 24 WAN connec tio ...

  • Carrier Access Network Device Axxius 800 - page 456

    15-4 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Technical Specifica tions Tech nica l Sp ecifications Controller Software Requir ed l Release 1.0 or hi gher is r equir ed for the TSR serv ice card l Release 2.0 or hi gher to s upport a TSR Se rvice card with TBOS l TSR relea se 1.2 or higher t o suppor t all fe ature s liste d in this ...

  • Carrier Access Network Device Axxius 800 - page 457

    Axxiu s 800 - R elease 2.2 15-5 Terminal Server Router Card Technical Specificatio ns RS-232 In terface l Up to 4 RS-23 2 DCE ports l Sele ctable as ynchron ous data r ates and d ata parame ters l 8-pin RJ- 45 modula r jacks l RJ-45- to-DB9 adap ter ca ble avail able Routing l IPX RIP/SAP l IP RI Pv1 , RIP v2 , RIP v/RI Pv 2 co mpat ibil it y mo de ...

  • Carrier Access Network Device Axxius 800 - page 458

    15-6 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Technical Specifica tions Frame Relay l RFC 1490 encapsu lation l ANSI T1.617 Anne x D LMI l ITU Q.933 Anne x A LMI Filtering l Fil tering up to Layer 4, stateful Security l Thre e user acc ounts l Thre e leve ls of s ecurity l PA P an d C HA P l Network Add ress Tr anslation ( NAT) l NAT ...

  • Carrier Access Network Device Axxius 800 - page 459

    Axxiu s 800 - R elease 2.2 15-7 Terminal Server Router Card Technical Specificatio ns Equipment Su pported for TBOS-to-SN MP Conversion l Proxim Lynx. sc Micro wave Radio Model s 31250, 31600, 31250, 3 1650 l Proxim Lynx.HD Microwave Radio Models 3 1350-10, 31850-1 0, 31145-10, 31145- F l Proxim Lynx DS-3 Micro wave Radi o Models 27710- 91, 2775 0- ...

  • Carrier Access Network Device Axxius 800 - page 460

    15-8 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Card Con figur ati on Card Configu ration The Ter minal S erver Route r car d has the o ption o f configu ratio n thro ugh CLI or th e TSR Menu-d riven sof tware, wh ich is ac cessed throug h Telnet. Th e followi ng CLI commands are all TSR r elated. For inf ormation on the TSR Menu-dr iv ...

  • Carrier Access Network Device Axxius 800 - page 461

    Axxiu s 800 - R elease 2.2 15-9 Terminal Server Router Card Card Co nfigur ation l add (router -lan) filter Add a n ad dre ss f ilt er to the tabl e of Laye r 2 fi lt er a ppl ied s pecif ie d LA N inter face . l add (router -lan) sec ondary ip addre ss Add a se condary I P addres s and subne t to t he LAN inter face. l add (router -lan) st atic Ad ...

  • Carrier Access Network Device Axxius 800 - page 462

    15-1 0 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Card Con figur ati on l delete (r outer) st atic dns host Dele te a s ta tic DN S h os t rec ord . l delete (r outer) upl oaduse r Remove a n existing au thori zed uploadu ser. l delete (r outer- lan) fi lter Remove a a sing le filt er ru le fr om the t able of La yer 2 filter s appli e ...

  • Carrier Access Network Device Axxius 800 - page 463

    Axxiu s 800 - R elease 2.2 15-1 1 Terminal Server Router Card Card Co nfigur ation l reset (rou ter) Reboot the Route r. All new confi gurat ion sinc e the last co nfigur ation wi ll be in- use. l set (router) default Reset th e router to i ts defau lt con figurat ion sett ings, an d will re boot. l set (router) dhcp Configur e the DHCP func tions. ...

  • Carrier Access Network Device Axxius 800 - page 464

    15-1 2 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Card Con figur ati on l set (router) reboot Set a utomati c reboot after an upload o f code or configu rati on file. l set (router) rip Speci fy versi on of RIP packets t o transmit and re ceive . l set (router) snmp Set the SNMP contact , loca tion, n ame on the ro uter. l set (router) ...

  • Carrier Access Network Device Axxius 800 - page 465

    Axxiu s 800 - R elease 2.2 15-1 3 Terminal Server Router Card Card Co nfigur ation l set (router- wan) dlci Conf igu re t he D L CI f or a sp ecif ied WA N int er fac e th at wi ll be us ing a f ram e relay e ncapsul ated trunk. l set (router- wan) gre Confi gure the Ge neric Rout ing Enca psulatio n tunneling f or a speci fied WAN i nte rface . l ...

  • Carrier Access Network Device Axxius 800 - page 466

    15-1 4 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Card Con figur ati on l show (router) d ns Displays the cu rrent DNS settin gs for the TSR card. l show (router ) dns proxy Displays the cu rrent DNS Pr oxy setti ngs for t he TSR card. l show (router) l mi Disp lay s the cur ren t Loca l M ana gem ent I nte rfac e se ttin gs f or the r ...

  • Carrier Access Network Device Axxius 800 - page 467

    Axxiu s 800 - R elease 2.2 15-1 5 Terminal Server Router Card Card Co nfigur ation l show (router -lan) fi lter Disp lay s the cur ren t LAN La yer 2 da ta fi lter s ap plie d to the LAN on the router card. l show (router -lan) st atic Displays the cu rrent list of static entri es for t he LAN on th e router card. l show (router-l an) st p Displays ...

  • Carrier Access Network Device Axxius 800 - page 468

    15-1 6 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Card Con figur ati on l status (r outer-tr unk) Displays the cu rrent st ate of the DNS res olver a nd the ent ries in the DNS cache . l st o re Save a software file fr om a slot t o a define d locati on on a PC, via TFTP. l te lne t (ro ute r) Esta blish a Tel net sess ion fr om the Ax ...

  • Carrier Access Network Device Axxius 800 - page 469

    Axxiu s 800 - R elease 2.2 15-1 7 Terminal Server Router Card Connector Pinout Connec tor Pi nou t 10Base-T E thernet The pi nout for the RJ-48C (fe male) c onnectors on t he front of t he card are as fo llows: RS-232 If th e card is set t o use the RS-2 32 connector (wit h jumper s) use the a bove RS-23 2 pinout s. There is a RS-232 to DB-9 c onve ...

  • Carrier Access Network Device Axxius 800 - page 470

    15-1 8 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card Connect or Pinou t TSR Card Jumpers The j umpers on the TSR card selec t the use of the 10/100Base- T (RJ-4 5) or RS-232. There is one ju mper for each po rt on the card. Each j umper ca n be set t o 10/10 0Base-T or RS- 232, in dependent o f the o thers. In the f ollowi ng graphic all ...

  • Carrier Access Network Device Axxius 800 - page 471

    Axxiu s 800 - R elease 2.2 15-1 9 Terminal Server Router Card LEDs LEDs The TSR s ervice ca rd has 2 LEDs per port. At Power -up Normal Operation Port Set for E ther net Top LED in dicates 1 00M Link, Bottom LED i ndicate s 10M Link Port Set for RS-232 TOP LED Bottom LED Descripti on Off Off Loss of power Red Red Card is inoperative Flashing Red Fl ...

  • Carrier Access Network Device Axxius 800 - page 472

    15-2 0 Axxius 80 0 - Releas e 2.2 Terminal Server Rout er Card LEDs ...

  • Carrier Access Network Device Axxius 800 - page 473

    C HAPTER V.35/.54 Card In this Chapter n Overview n Feature s n Technic al Sp eci fic atio ns n Card Co nfigu ration - CLI Commands n Cables n Connector Pinou ts - V.35 DCE (DB-26) n LEDs ...

  • Carrier Access Network Device Axxius 800 - page 474

    16-2 Axxius 80 0 - Releas e 2.2 V.35/.54 Card Overview Ove rvi ew The Har dened Dual V.3 5/.54 Ser vice car d enabl es wirele ss ser vice prov iders to provisi on conne ctivit y to hi gh-speed s erial synchrono us Data T erminal Equi pment (DTE) d evices commonl y depl oyed in the cell sites. V.35 servi ce connect ions suppor ting fr ame relay o r ...

  • Carrier Access Network Device Axxius 800 - page 475

    Axxiu s 800 - R elease 2.2 16-3 V.35/.54 Card Feat ur es Features l Each p ort provi des any n x 56 / 64 Kbps data rat e up to 1.536 Mbps o n each port l Full non-blocki ng cro ss-connec tion o f all ti meslots t o any T1 a ccess li ne l Up to 1 6 V.35 ports ma y be equi pped in a s ingle Axxi us 800 pl atform l Suppor ts adapta tion a nd tanspor t ...

  • Carrier Access Network Device Axxius 800 - page 476

    16-4 Axxius 80 0 - Releas e 2.2 V.35/.54 Card Technical Specifica tions Testing and Diagnost ics (V.35/ 54 card) l Addressa ble V.54 l oop up a nd loop down ( 127-code) patte rn generat ion/ dete ction l 2047, 2 15 -1, 2 20 -1 an d QRSS Test Pat terns with erro r counter Power l 2 W maximum Environment In ad dition t o the s ystems e nviron ment re ...

  • Carrier Access Network Device Axxius 800 - page 477

    Axxiu s 800 - R elease 2.2 16-5 V.35/.54 Card Card Co nfigur ation Card Configu ration The V.35/54 card ca n be confi gured, u sing the Comman d Line Inte rface ( CLI). CLI Commands The fo llowing co mmands a re used t o configur e the V.3 5 cards. For detai led info rmatio n on these commands , see Chap ter 5, CLI Commands . l connect Creates two- ...

  • Carrier Access Network Device Axxius 800 - page 478

    16-6 Axxius 80 0 - Releas e 2.2 V.35/.54 Card Cables Cables Dependi ng on your applica tion, you will nee d to purchas e one or more of the availa ble Carrier Access Corporati on V.35 da ta cables : These cables ca n be pur chased at a lic ensed Carr ier Access distri butor. Part Nu mb er Desc rip ti on Notes 005-0 014 V.35 Femal e 10-foot cabl e T ...

  • Carrier Access Network Device Axxius 800 - page 479

    Axxiu s 800 - R elease 2.2 16-7 V.35/.54 Card Conn ector Pinouts Connec tor Pi nou ts V.35 DCE (DB-26) The V.35 DCE da ta port con necti on is made at the sub-mini atur e DB-26 connect or on the Axxiu s 800 usi ng the 10- foot, 2 5-foot, or 50 foot Car rier Acc ess DTE V.35 cabl e equi pped with a s ub-miniat ure DB-2 6 connec tor and a 3 4-pin Wi ...

  • Carrier Access Network Device Axxius 800 - page 480

    16-8 Axxius 80 0 - Releas e 2.2 V.35/.54 Card Connect or Pinou ts LEDs Each V.3 5 port has an LED, with def initio ns as shown i n the tabl e belo w. Sub-miniatur e DB-26 Signal Winche ster 34 -pi n (f em ale) Paired Signals 15  Receive Clock A → V  17  Receive Clock B → X  22 ← Local Loop back  J  25 ← Remo te Lo opba ck ...

  • Carrier Access Network Device Axxius 800 - page 481

    C HAPTER Low Speed Protection Card In this Chapter n Overview n Features n Technical Speci fications n Card Confi guration - CLI Commands - Basic Setup of a Protected System n LEDs ...

  • Carrier Access Network Device Axxius 800 - page 482

    17-2 Axxius 80 0 - Releas e 2.2 Low Speed Protection Card Overview Ove rvi ew Low spee d protec tion provi des back up circuit ry for any T1 servic e port on a Quad T1 serv ice card or Qua d DS1 ADPCM s ervice c ard i n the Axxi us chas sis. The Relay c ard provide s the ph ysica l connecti vity bet ween the “Prot ected” T1 s ervic e port and t ...

  • Carrier Access Network Device Axxius 800 - page 483

    Axxiu s 800 - R elease 2.2 17-3 Low Speed Protection Card Overview The Backup Card A Quad T1 or Quad DS1 ADPCM service card can be con figured as t he “Backup car d”. The Bac kup card pr ovides T1 po rt pr otection for other inst alled T1 s ervic e cards, and can oc cupy any one of the eight se rvice card slot s. Note: It is imperat ive th at t ...

  • Carrier Access Network Device Axxius 800 - page 484

    17-4 Axxius 80 0 - Releas e 2.2 Low Speed Protection Card Featur es Features l Redunda nt 1:7 T1 interf ace prote ction l Mainta ins se rvice durin g card swaps l Four T1 ports pro vide ho t-standb y backup for up to 28 T1 po rts l Any of the eight servi ce slots can be d esignate d as a Ba ckup car d slot l Seven sel ectable protection pri orit y ...

  • Carrier Access Network Device Axxius 800 - page 485

    Axxiu s 800 - R elease 2.2 17-5 Low Speed Protection Card Technical Specificatio ns Service Cards Supported l Quad T1 Se rvice Car d (hardene d) l DS1/E1 Serv ice Car d (hardene d) l Quad DS1 ADPCM Servi ce Card (ha rdened) Management l RS-232/V.24 asyn chronou s craft port l 10Base -T Etherne t manageme nt port l Command Li ne Inter face (C LI) fr ...

  • Carrier Access Network Device Axxius 800 - page 486

    17-6 Axxius 80 0 - Releas e 2.2 Low Speed Protection Card Card Con figur ati on Card Conf iguration CLI Commands The fo llowing co mmands a re used t o configur e the Lo w Speed Prote ction car ds. For deta iled inf ormation on these commands, see Ch apter 5 , CLI Commands. l set lsbackup Defin es the bac kup prot ection s lot. l set lsprotec t ena ...

  • Carrier Access Network Device Axxius 800 - page 487

    Axxiu s 800 - R elease 2.2 17-7 Low Speed Protection Card Card Co nfigur ation Use t he fo llo win g s tep s to s et u p a Prot ecte d S yst em. 1. Instal l a Rel ay card in the Axxi us Relay s lot. 2. Set the ju mp ers on t he Qu ad T1 card s to rou te t he s ign al to t he w ire -wr ap p ins , see Jumper Set tings on page 14-8 for deta ile d in s ...

  • Carrier Access Network Device Axxius 800 - page 488

    17-8 Axxius 80 0 - Releas e 2.2 Low Speed Protection Card LEDs LEDs The Low S peed Pro tection card has 10 LEDs, which are defi ned bel ow. Each channel on t he Quad T 1 card h as two LEDs. The descri ption of the to p LED is shown bel ow, the bott om LED is not us ed wit h this applicat ion. Quad T1 Back up Card Quad T1 Pr ot ect ed C ar d LED Sta ...

  • Carrier Access Network Device Axxius 800 - page 489

    C HAPTER Maintenance In this Chapter n Software Loading - Loading System Software via TFTP - Upgrading Software Levels via XModem n Back up Axx ius 80 0 Co nfig urati on - Save Controller Configuration - Load Controller Configuration n Hot Swap Service Card ...

  • Carrier Access Network Device Axxius 800 - page 490

    18-2 Axxius 80 0 - Releas e 2.2 Maintenance Software Loadin g Software Loading Loading System Softw are via TFTP 1. Login to t he Axxi us 800, usin g a term inal emula tion progr am or via Te lnet. NOTE: The tftp utilit y prov ided by Carrier Access with the do wnloadable soft ware must be running, in the same directory as th e s oftw ar e f ile. C ...

  • Carrier Access Network Device Axxius 800 - page 491

    Axxiu s 800 - R elease 2.2 18-3 Maintenance Softw are Loadi ng Loading Router Software via TFTP 1. Login to t he Axxi us 800, usin g a ter minal emu lation pr ogram or vi a Telnet. 2. En ter: load [rtr_car d-addr] tftp {ip- addr} "file- name" The tf tp util ity provi ded by Ca rrier Acc ess with t he downl oadble sof tware must al so b e ...

  • Carrier Access Network Device Axxius 800 - page 492

    18-4 Axxius 80 0 - Releas e 2.2 Maintenance Software Loadin g load standby tftp {ip-addr} "file-name" CLI command to load software to the Standby Controller. See the l oad tf tp command f or detai ls. reset standby Do you really want to do this ? Y Reset the Standby Contro ller. You will be asked to confirm this command, answ er Y (Yes) . ...

  • Carrier Access Network Device Axxius 800 - page 493

    Axxiu s 800 - R elease 2.2 18-5 Maintenance Softw are Loadi ng Upgrading System an d Router Softw are via TFTP using Proxy Requir ed: - Rou ter Se rvice car d (TSR) r elease 1 .0 or hi gher - Contro ller sof tware 1.1 o r higher - Ether net cable connected to por t on front of Router card 1. Set u p the Proxy wi th th e followi ng comma nds set eth ...

  • Carrier Access Network Device Axxius 800 - page 494

    18-6 Axxius 80 0 - Releas e 2.2 Maintenance Software Loadin g 3. Afte r download, the progra m will be loade d from RAM into the flash memory and th e sy ste m w ill a uto mati call y re star t. W ai t until the boo t m enu pro mpt is disp layed befo re power ing down t he unit. I f the downl oad fa ils an d no prompt is seen after a full mi nute, ...

  • Carrier Access Network Device Axxius 800 - page 495

    Axxiu s 800 - R elease 2.2 18-7 Maintenance Softw are Loadi ng Upgrading Software Levels via XModem The fo llowing upg rade c an also be performed t hrough the POTS modem. 1. Login to t he Axxi us 800. 2. En ter: load {ctrlr-id} xmodem to dow nl oad the app lica tio n fro m th e bin ary file . T his will st ar t th e syst em looking for an xmodem d ...

  • Carrier Access Network Device Axxius 800 - page 496

    18-8 Axxius 80 0 - Releas e 2.2 Maintenance Software Loadin g 3. The binar y fil e name is usua lly i n the format : Axxius Axxius.pkt. A t 9600 bau d, the f ile tr ansfer wil l ta ke approxi mately 2 0 minute s. 4. Afte r download, the progra m will be loade d from RAM into the flash memory and th e sy ste m w ill a uto mati call y re star t. W ai ...

  • Carrier Access Network Device Axxius 800 - page 497

    Axxiu s 800 - R elease 2.2 18-9 Maintenance Backup Axxi us 800 C onfigura tion Backup Axxius 800 Configuration A text file fro m the curr ent co nfigur ation can be gen erated to reloa d the in t he even t the conf iguratio n has been lost due to card or softwa re problems. The download of th e file, generat ed by t he print config command, can be ...

  • Carrier Access Network Device Axxius 800 - page 498

    18-1 0 Axxius 80 0 - Releas e 2.2 Maintenance Backup Axxius 800 Co nfigu ration Load Controller Config uration 1. Open HyperTe rm sess ion with th e Axxius 800 unit. 2. In HyperTe rm, select Fi le/Pr ope rti es/S ett ings /AS CII S etu p . 3. Set t he Line delay t o 300 ms an d the Char acter del ay to 5 ms . 4. Sele ct OK to save ASCI I Setup an d ...

  • Carrier Access Network Device Axxius 800 - page 499

    Axxiu s 800 - R elease 2.2 18-1 1 Maintenance Hot Swap Serv ice Ca rd Hot Swap Service Card To Hot- Swap (repl ace) a ser vice card while the uni t is power ed on, f ollow the steps belo w: 1. Gentl y slide t he Serv ice card straight out of the s lot. 2. Gent ly s lide the new Ser vic e ca rd int o t he em pty slo t. 3. En sure that the n ew car d ...

  • Carrier Access Network Device Axxius 800 - page 500

    18-1 2 Axxius 80 0 - Releas e 2.2 Maintenance Hot Swap Ser vice Card ...

  • Carrier Access Network Device Axxius 800 - page 501

    A PPENDIX Regulatory Approvals In this App endix This appendix co ntains a chart o f all th e componen ts of the Axxius 8 00 and their Re gulat ory Approval s. ...

  • Carrier Access Network Device Axxius 800 - page 502

    A-2 Axxius 800 - Release 2 .2 Regulatory Approvals Ax x i us 8 00 Cha s s i s UL60950 FCC Part 15, Class A FCC Part 68 NEBS Level 3 cert, type 2 & 4 equip CSA C22.2 No. 60950-00 ICES-003 Class A CS-03 A x x i u s 800 C has s i s X X X X X X D S 3 C ontr ol l er X X X X D S 1 C o n t r o l l e r XXX XXX Low S peed P r ot ec t i on X X X X X X FX ...

  • Carrier Access Network Device Axxius 800 - page 503

    A PPENDIX SNMP Interface In this App endix n Overview n SNMP B asi cs n Enterprise M IB Suppo rt n Router E nterprise MIB Support n Public MI B Support n Router Pu blic MIB Support n SNMP Trap Reports ...

  • Carrier Access Network Device Axxius 800 - page 504

    B-2 Axxius 800 - Release 2 .2 SNMP Interface Overview Ove rvi ew The Si mple Netwo rk Management P rotocol ( SNMP) enabl es network operat ions cen ters (NO Cs) to m oni tor an d ma nag e ne tw ork eleme nts acro ss a n in tern etw ork . Th e Axxius 800 support s SNMP thr ough its Et hernet por t, whic h provides acces s to the carrie r’s TCP/ IP ...

  • Carrier Access Network Device Axxius 800 - page 505

    Axxiu s 800 - R elease 2.2 B-3 SNMP Interface Enter prise MI B Support Enterprise MIB Supp ort This rele ase is w ith f ull S NM Pv1 and S NMP v2c sup por t. En terp ris e MIB s ar e de fine d usin g only SMIv2 ( as note d in th e table) . Enterpris e MIB Name Enterpr ise MIB Filena me Axxius-SYSTEM-MIB Axxi us-sys tem.mib Axxius-D S1-MIB Axxius- d ...

  • Carrier Access Network Device Axxius 800 - page 506

    B-4 Axxius 800 - Release 2 .2 SNMP Interface Router Enterprise MIB Supp ort Rout er Ente rpri se MIB Suppor t Enterpri se MIB Name Enterpr ise MIB Filena me Router Specif ic CAGENROUTER-CARDPROFILE-MIB caGenRout er-CardPr ofile.mib CAGENROUTER-FILTERS-MIB ca GenRouter-Fi lters.mib CAGENROUTER-LANPROFILE-MIB caGenRout er-LanPr ofile.mib CAGENROUTER- ...

  • Carrier Access Network Device Axxius 800 - page 507

    Axxiu s 800 - R elease 2.2 B-5 SNMP Interface Public MI B Support Public MIB Suppo rt MIB Table Co mmen ts RFC1155 (RFC-11 55-smi.MIB) RFC1212 (RFC-12 12.MIB) RFC121 3 (RFC-1 213-MIB ) system interfaces ip icmp tcp udp snmp egp not s upported RFC1215 (RFC-12 15.MIB) RFC1215-TRAP (RFC-12 15-TRAP.MIB) RFC165 9 (RFC1 659-MIB ) rs232Po rtTable rs232Sy ...

  • Carrier Access Network Device Axxius 800 - page 508

    B-6 Axxius 800 - Release 2 .2 SNMP Interface Publi c MIB Supp ort MIB Table Co mmen ts RFC249 4 (DS0 -MIB, DS0BUNDLE-MIB) dsx0Con figTab le dsx0Chan MappingTabl e dsx0Bun dleTabl e Dsx0Bo ndingTable n ot suppo rted RFC249 5 (DS1-MIB) dsx1ConfigTab le dsx1Cur rentTab le dsx1Int ervalTa ble dsx1TotalTable Far End Tables and Fractio nal Table not supp ...

  • Carrier Access Network Device Axxius 800 - page 509

    Axxiu s 800 - R elease 2.2 B-7 SNMP Interface Rout er Publ ic MIB Su pport Router Publ ic MIB Support MIB Table Comment s RFC1213 (RFC- 1213-MIB) system in terf ace s ip icmp tcp udp snmp egp not supporte d RFC1907 (SNMPv2 -MIB) system snmp SMIv2 Ext ension of RFC1213 Sys ORTable not suppor ted RFC2011 (IP-MI B) ip icmp SMIv2 Ext ension of RFC1213. ...

  • Carrier Access Network Device Axxius 800 - page 510

    B-8 Axxius 800 - Release 2 .2 SNMP Interface SNMP Tr ap R epo rts SNMP Trap Re ports The Axxi us 800 can s end the followin g SNMP trap r eports. Standard Tr aps Enterprise Trap s Trap Descr iptio n Tes t Me thod authentication Failure Occurs when a bad community string is used. Attempt a Get or Set using an invalid communit y string . linkDown Sen ...

  • Carrier Access Network Device Axxius 800 - page 511

    A PPENDIX Loopback Tests In this App endix n Overview n DS1 Loopb acks n V.35 Loo pbacks n V.35/V. 54 Loop ...

  • Carrier Access Network Device Axxius 800 - page 512

    C-2 Axxius 800 - Release 2 .2 Loopback Tests Alarms Alarms Test Alarm The Axxi us 800 alarm f unctions c an be manuall y teste d using the following c ommand for setting critica l, major an d minor a larms. Turni ng alarms on or off wi ll pr oduce alarm mes sages and log entr ies stat ing the alarm event was manual ly set/ cleared by the user . Syn ...

  • Carrier Access Network Device Axxius 800 - page 513

    Axxiu s 800 - R elease 2.2 C-3 Loopback Tests Alarms The following are hyperlinks to all the card LED information: DS1 Controll er Card, LEDs DS3 Controll er Card, LEDs FXO Voice Card, LEDs ISDN BRI Card, LEDs OCU-DP Card, LEDs Single Channe l POTS Cards, LEDs Quad DS1 ADPCM Card, LEDs Quad T1 & Quad DS1/E1 Card, LEDs Terminal Ser ver Route r C ...

  • Carrier Access Network Device Axxius 800 - page 514

    C-4 Axxius 800 - Release 2 .2 Loopback Tests Alarms Displa y Alarms Use t he alarms command to dis play the a ctive al arms. Eac h alarm is rela ted to a part icular a ddres s and has a s everi ty categ ory (maj or, minor , criti cal, a lert). The repo rt can be f iltere d by port a ddress and/or se verity. Syntax: alarms [slot|slot:port|slot:port: ...

  • Carrier Access Network Device Axxius 800 - page 515

    Axxiu s 800 - R elease 2.2 C-5 Loopback Tests Logs Logs Display t he eve nt log to view a log of al l system e vents, or narrow t he vie w to only disp lay spe cific i nformat ion. Syntax: log [slot|slo t:port] [category] [severity] Example: log Time Date Severity Description ---- ---- -------- ------------------------ ------- 00:00:11 01/01/2002 I ...

  • Carrier Access Network Device Axxius 800 - page 516

    C-6 Axxius 800 - Release 2 .2 Loopback Tests Status and Perf ormance Status and Performance The f ollowing s tatus commands will display vital inform ation re gardin g the s ystem that will ai d in t roubleshoo ting. All commands li sted bel ow are h yperlinke d to the CLI comm an d . statu s (adpcm) statu s (bri) statu s clock statu s (ds0) statu ...

  • Carrier Access Network Device Axxius 800 - page 517

    Axxiu s 800 - R elease 2.2 C-7 Loopback Tests Overview Ove rvi ew A loopb ack te st is a d iagnos tic proc edure i n which a signal is tr ansmit ted an d retu rned to t he sendi ng devi ce af ter pass ing t hrough all o r a port ion of a ne twork or c ircui t. The retu rne d si gnal i s co mp ared wi th th e tra nsm itte d sig na l in o rde r to e ...

  • Carrier Access Network Device Axxius 800 - page 518

    C-8 Axxius 800 - Release 2 .2 Loopback Tests DS1 Loop backs View Status of Loopback > status a:1 SLOT A: Status for DS1 1: Receive: Traffic Transmit: Traffic Loopback: LINE Disable Line Loopback > set a:1 line loopdow n OK View Status of Loopback > status a:1 SLOT A: Status for DS1 1: Receive: Traffic Transmit: Traffic Loopback: OFF ...

  • Carrier Access Network Device Axxius 800 - page 519

    Axxiu s 800 - R elease 2.2 C-9 Loopback Tests DS1 Loop backs DS1 Payload Loop Loops a t DS1 (in f ramer) and refr ames the T1. Ha ve DS1 vend or chec k for fra ming/ erro rs. Enable Pay load Loopback > set a:1 payload loop up OK View Status of Loopback > status a:1 SLOT A: Status for DS1 1: Receive: Traffic Transmit: Traffic Loopback: PAYLOAD ...

  • Carrier Access Network Device Axxius 800 - page 520

    C-10 Axxius 800 - Release 2 .2 Loopback Tests DS1 Loop backs Receiving DS-1 CSU Loop Causes a line Lo opback. Lo opup cod e sent by r emote unit or netw ork. Occ urs at lo cal DS1 CSU. Have DS1 vendor check for framing/e rrors. Enable Detection of CSU Loopcode Enable det ection of CSU loop code (10000 fo r loopup ; 100 fo r loopdo wn). > set a:1 ...

  • Carrier Access Network Device Axxius 800 - page 521

    Axxiu s 800 - R elease 2.2 C-11 Loopback Tests DS1 Loop backs View Status of Loopback > show a:1 SLOT A: Settings for DS1 1: Circuit ID: CAC DS1# A:1 Up/Down: UP Framing: ESF Line Coding: B8ZS Line Build Out: DSX-1 EQUALIZATION FOR 0-1 33 ft. (CSU 0dB) Loop Code Detectio n: ON (Default) Loopback: OFF FDL Type: None Performance Thresh old Setting ...

  • Carrier Access Network Device Axxius 800 - page 522

    C-12 Axxius 800 - Release 2 .2 Loopback Tests DS1 Loop backs DS1 Equipment Loo p Note: Quad T1 LED flashe s green during equ ipment loop . Enable Eq uipment Loopback Where a Quad T1 card is in slot 5. > set 5:1 equipment lo opup OK View Status of Loopback > show 5:1 SLOT 5: Settings for DS1 1: Circuit ID: CAC DS1# 5:1 Up/Down: UP Framing: ESF ...

  • Carrier Access Network Device Axxius 800 - page 523

    Axxiu s 800 - R elease 2.2 C-13 Loopback Tests DS1 Loop backs errored seconds: 0 0 sev. errored frame seconds: 0 0 line errored secon ds: 0 0 controlled slip se conds: 0 0 bursty errored sec onds: 0 0 degraded minutes: 0 0 total linecode vio lations: 0 0 total pathcode vio lations: 0 0 Disable Equipment Loopback > set 5:1 equipment lo opdown OK ...

  • Carrier Access Network Device Axxius 800 - page 524

    C-14 Axxius 800 - Release 2 .2 Loopback Tests V.35 Loop back s V.35 Loop backs V.35 Line Loop Note: V.35 L ED flash es gre en during l ine loop. Loop oc curs at V.35 port. Check for sy nc and err ors at lo cal da ta port. Enable Line Loopback Where a V.35 card is in slot 6 . > set 6:1 line loopup OK View Status of Loopback > show 6:1 SLOT 6: ...

  • Carrier Access Network Device Axxius 800 - page 525

    Axxiu s 800 - R elease 2.2 C-15 Loopback Tests V.35 Loop backs Disable Line Loopback > set 6:1 line loopdow n OK View Status of Loopback > show 6:1 SLOT 6: Settings for V35 Port 1: CTS: Always High Timing: Source Rx Clock Inversio n: Normal Tx Clock Inversio n: Normal Data Inversion: Normal Data Speed: 64K Data Rate: 1536 K Loopback: None ...

  • Carrier Access Network Device Axxius 800 - page 526

    C-16 Axxius 800 - Release 2 .2 Loopback Tests V.35 Loop back s V.35 Equipment Loo p Note: V.35 L ED flash es yel low during e quipment lo op. Loops at local V. 35 port. Check f or sync an d errors at remote data po rt, with or withou t BERT. Enable Eq uipment Loopback Where a V.35 card is in slot 6 . > set 6:1 equipment lo opup OK View Status of ...

  • Carrier Access Network Device Axxius 800 - page 527

    Axxiu s 800 - R elease 2.2 C-17 Loopback Tests V.35 Loop backs Disable Equipment Loopba ck > set 6:1 equipment lo opdown OK View Status of Loopback > show 6:1 SLOT 6: Settings for V35 Port 1: CTS: Always High Timing: Source Rx Clock Inversio n: Normal Tx Clock Inversio n: Normal Data Inversion: Normal Data Speed: 64K Data Rate: 1536 K Loopbac ...

  • Carrier Access Network Device Axxius 800 - page 528

    C-18 Axxius 800 - Release 2 .2 Loopback Tests V.35/V.5 4 Loop V.35/V.54 Loop V.35/V. 54 Ser vice Card Desc ription The V.35 Ca rd with V. 54 Loop Test pr ovides the cap ability for th e V.35 card to detect networ k loop bac k ini tiation signa ls and pro vide a networ k loop back for l oop te sting . Each chan nel of the V.35 will cont inuously mo ...

  • Carrier Access Network Device Axxius 800 - page 529

    Axxiu s 800 - R elease 2.2 C-19 Loopback Tests V.35/V.5 4 Loop V.54 Loop Note : Lo cal LED f la she s yell ow , re mote LE D fla shes gr een. Enabl e V.54 Loop Where a V.35/V.5 4 card is in slot 6. > set 6:1 v54 network enable OK View Status of Loopback > show 6:1 SLOT 6: Settings for V35 Port 1: CTS: Always High Timing: Source Rx Clock Inver ...

  • Carrier Access Network Device Axxius 800 - page 530

    C-20 Axxius 800 - Release 2 .2 Loopback Tests V.35/V.5 4 Loop V.54 Equipment Loo pback Enable V.54 Equipment Loopup Where a V.35/V.5 4 card is in slot 6. > set 6:1 v54 equipmen t loopup OK View Status of Loopback > show 6:1 SLOT 6: Settings for V35 Port 1: CTS: Always High Timing: Source Rx Clock Inversio n: Normal Tx Clock Inversio n: Normal ...

  • Carrier Access Network Device Axxius 800 - page 531

    Axxiu s 800 - R elease 2.2 C-21 Loopback Tests V.35/V.5 4 Loop > status 6:1 SLOT 6: Status for V35 PORT 1 : DCD: High CTS: High DSR: High RTS: High DTR: High BERT: RUNNING BITS: 838695 0 ERRS: 0 BER: 0.0000000 0 Disable V.54 Equipment Loopup > set 6:1 v54 equipmen t loopdown OK View Status of Loopback > status 6:1 SLOT 6: Status for V35 PO ...

  • Carrier Access Network Device Axxius 800 - page 532

    C-22 Axxius 800 - Release 2 .2 Loopback Tests V.35/V.5 4 Loop ...

  • Carrier Access Network Device Axxius 800 - page 533

    G LOSSARY 10Base-T The most widely installed Ethernet lo cal area networks (LANs ) use ordinar y telepho ne twisted-p air wire. When used on Eth ernet, this carri er medium i s known at 10BASE- T. 10BASE-T s uppor ts Ethernet’s 10 Mbps transmission speed. 100Base-TX 100B ase-TX is a 100 Mbps l ocal area networ k, know as Fast Et hernet. ADPCM Ada ...

  • Carrier Access Network Device Axxius 800 - page 534

    Gloss ary - 2 Axxius 80 0 - Rele ase 2.2 Glossary authoriza tion authorization The process o f granting or denying acces s to a network r esource. Mos t computer secu rity systems are ba sed on a two-step process, sometimes more. The firs t stage is authentication, which ensures that a use r is who he or she claims to be and in some cases, that the ...

  • Carrier Access Network Device Axxius 800 - page 535

    Axxiu s 800 - R elease 2.2 G lossary - 3 Glossary bipol ar bip olar The pr edominant signalin g method used for digital tran smissio n services, such as DDS and T1. The signal carrying th e binary value alternates between positive and negative. Zero and one values are represented by th e signal amplitude at either polarity, while no-value "spa ...

  • Carrier Access Network Device Axxius 800 - page 536

    Gloss ary - 4 Axxius 80 0 - Rele ase 2.2 Glossary bro adband bro adba nd A technology that provides an extrem ely wide and fast ban dwidth s o that many peopl e can simult aneously use the serv ice. It is generally associated with mult iple types of transm issions on the s ame connection such as voice, data, vid eo and digital or ana log informatio ...

  • Carrier Access Network Device Axxius 800 - page 537

    Axxiu s 800 - R elease 2.2 G lossary - 5 Glossary channel channel A ge neric term for a commun ications path o n a given medium; multip lexing techn iques allow provi ders to put mul tiple channels over a single m edium. Cha nnel Associated Signaling (CAS) A form of cir cuit state sig naling in which the circu it state is in dicated by one or more ...

  • Carrier Access Network Device Axxius 800 - page 538

    Gloss ary - 6 Axxius 80 0 - Rele ase 2.2 Glossary Constan t Bit Rate (CBR) Const ant Bi t Rate (CBR) Refers t o the trans mission pro perties t hat data, video and voice uph old when traversing a transport medium. I nformation traveling at a cons tant bit rate means there is no fluctu ation in signal integrity . CSU Channel Service Unit, the in ter ...

  • Carrier Access Network Device Axxius 800 - page 539

    Axxiu s 800 - R elease 2.2 G lossary - 7 Glossary DHCP DHCP Dynami c Host C onfigur ation Protocol. DHCP i s a net work confi guration that allows maint enance to be perform ed from a centr al site rather than by en d use rs. download To transfer data from a larger "host" system to a smaller "client" system’ s hard dri ve or o ...

  • Carrier Access Network Device Axxius 800 - page 540

    Gloss ary - 8 Axxius 80 0 - Rele ase 2.2 Glossary E&M Sign al ing E&M Signali ng A signaling arrangement that uses se parate leads, called respectively the E lead and the M lead , for the sign aling and voice sig nals. The M lead (derived from ‘Mouth’) trans mits ground or battery to the distan t end of the circuit, while inco ming sign ...

  • Carrier Access Network Device Axxius 800 - page 541

    Axxiu s 800 - R elease 2.2 G lossary - 9 Glossary frame frame A fragment of data th at is packaged into a f rame format, which co mprises a header, paylo ad, and trailer. frame re lay A packet-switching protocol fo r connecting devices on a Wide Area Network (WAN). F rame Relay net works in the U. S. suppo rt data t ransfer rates at T1 (1.544 Mbps) ...

  • Carrier Access Network Device Axxius 800 - page 542

    Gloss ary - 1 0 Axxius 800 - Release 2 .2 Glossary GUI GUI Graphical User Inter face, pronounced "GOOEY". A set of screen presentations and metaph ors that utilize graphic elements such as icons in an attempt to make an operating system easier to use. High Density Bipo lar 3 (HDB3) A bi pola r c odin g me thod th at do es not allow more t ...

  • Carrier Access Network Device Axxius 800 - page 543

    Axxiu s 800 - R elease 2.2 Gloss ary - 1 1 Glossary ISDN BRI ISDN BRI Integrated Ser v ices Digi tal Networ k. BRI, whi ch is 144,0 00 bit s per second and designe d for the d eskt op. intern et "A ne tw ork of ne tw ork s," the I nt er net s upp ort s FTP , W WW, Go pher , E-Mail, Telnet, and many other wor ld-wide information tran sfer ...

  • Carrier Access Network Device Axxius 800 - page 544

    Gloss ary - 1 2 Axxius 800 - Release 2 .2 Glossary Line C oding Vio lation ( LCV) Line Coding Violation (LCV) This parameter is a count of both B PVs and EXZs occurring over the accumulation period . An EXZ increments the LCV by one reg ardless of the length of the zero s tring. Line E rro red Second s (LES) A Line Errored Second is a s econd in wh ...

  • Carrier Access Network Device Axxius 800 - page 545

    Axxiu s 800 - R elease 2.2 Gloss ary - 1 3 Glossary LULT LULT Lin e Unit Line Termination LUNT Line Unit Netw ork Termination Management Information Base (MIB) A data base of objects, with attributes and values, repr esenting the manageab le components of a networ k device. Used in SN MP. There are industry s tandardized MIBs and pr oprietary MIBs ...

  • Carrier Access Network Device Axxius 800 - page 546

    Gloss ary - 1 4 Axxius 800 - Release 2 .2 Glossary Networ k Address Translat ion (NAT) Network Address Translation (NAT) An Internet standard that enables a local-area network (LAN) to use one set of IP addr esses for internal traffic and a s econd set of addresses for external traffic. A NAT bo x located where the LAN meets the Internet makes all ...

  • Carrier Access Network Device Axxius 800 - page 547

    Axxiu s 800 - R elease 2.2 Gloss ary - 1 5 Glossary Password Authentication Protocol (PAP) Password Aut hen tica tio n Protocol (PAP) An authen tication pro tocol that allows Point- to-Point Pro tocol p eers to authenticate one ano ther. Peak Cell Rate (PCR) The Peak Cell Rate, in c ells/sec, is the cell rate which the sourc e may never exceed. PLA ...

  • Carrier Access Network Device Axxius 800 - page 548

    Gloss ary - 1 6 Axxius 800 - Release 2 .2 Glossary robb ed bi t robb ed bit A type of analog signaling that will o ccasionally steal information bits use d fo r cir cui t sig nal ing c odi ng . router A computer or internet working dev ice that directs traffic and moves packets between n etworks. A hardwa re architecture us ed in LAN s, MANs, WANs, ...

  • Carrier Access Network Device Axxius 800 - page 549

    Axxiu s 800 - R elease 2.2 Gloss ary - 1 7 Glossary star net wo rk star network A star is a network topology that connects all devices to a central location called a hub. Trad itional star networks are designed to be easily expandable because hubs can be connected to additional hubs of other networks . A star is the opposi te of a ri ng networ k. A ...

  • Carrier Access Network Device Axxius 800 - page 550

    Gloss ary - 1 8 Axxius 800 - Release 2 .2 Glossary TBOS TBO S Telemetry Byte Oriented Se rial. TBOS is an alar m monitoring an d control prototy pe for tele phone netw ork equi pment. telnet An Intern et standard protocol that enables a computer to fu nction as a terminal work ing from a remo te computer. TFTP Tri vial File Transfer Protocol. Time ...

  • Carrier Access Network Device Axxius 800 - page 551

    Axxiu s 800 - R elease 2.2 Gloss ary - 1 9 Glossary V.90 V.90 The standa rd for full-duplex mo dems sending and receiving data across phon e lines at up to 56 ,600 bps, approved by the I nternati onal Telecommun ication Unio n (ITU) i n February , 1998. VC MUX Virtu al Channel Multip lexer. Voice Over IP (VoIP) An emerging techn ology that is, voic ...

  • Carrier Access Network Device Axxius 800 - page 552

    Gloss ary - 2 0 Axxius 800 - Release 2 .2 Glossary ...

  • Carrier Access Network Device Axxius 800 - page 553

    I NDEX Numerics 10/1 00B ase -T Et her ne t Conn ec tor . . . . . . . . 1-13 10B ase- T . . . . . . . . . . . . . . . . . . . . . . Glossary-1 26-pi n mic ro-SC SI V.35 card . . . . . . . . . . . . . . . . . . . . . . . . . 16-7 V.35 /V. 54 c ard s . . . . . . . . . . . . . . . . . . . . 16-6 3-DSO BRITE mode . . . . . . . . . . . . . . . . . . . 9 ...

  • Carrier Access Network Device Axxius 800 - page 554

    Index - 2 Axxius 80 0 - Rel ease 2.2 Index C Base Platfo rm . . . . . . . . . . . . . . . . . . . . . . . . 1-1 ACO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Card Remo val Handles 1- 10 , 6-10 , 7-12 , 11-5 Chass is . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9 Control Panel Interfaces . . . . . . . . . . . . . 1-11 L ...

  • Carrier Access Network Device Axxius 800 - page 555

    Axxiu s 800 - R elease 2.2 Index - 3 Index C st at ic ip x net wor k . . . . . . . . . . . . . . 5-30 static mac address . . . . . . . . . . . . . . 5-31 static nat address . . . . . . . . . . . . . . . 5-32 use r . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32 alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33 clear . . ...

  • Carrier Access Network Device Axxius 800 - page 556

    Index - 4 Axxius 80 0 - Rel ease 2.2 Index C (fx o) . . . . . . . . . . . . . . . . . . . . . . . . . . 5-87 (fx sP S) . . . . . . . . . . . . . . . . . . . . . . . . 5- 88 (oc udp ) baud . . . . . . . . . . . . . . . . . . . . . . . . 5-97 loopb ack . . . . . . . . . . . . . . . . . . . . . 5-98 loopdetect . . . . . . . . . . . . . . . . . . . . 5 ...

  • Carrier Access Network Device Axxius 800 - page 557

    Axxiu s 800 - R elease 2.2 Index - 5 Index C enable/disable . . . . . . . . . . . . . . 5-136 syslog . . . . . . . . . . . . . . . . . . . . . . 5-13 7 enable/disable . . . . . . . . . . . . . . 5-137 facility . . . . . . . . . . . . . . . . . . . . 5-13 7 level . . . . . . . . . . . . . . . . . . . . . . 5-138 serv er . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 558

    Index - 6 Axxius 80 0 - Rel ease 2.2 Index C level . . . . . . . . . . . . . . . . . . . . . . . 5-169 pas swo rd . . . . . . . . . . . . . . . . . . . . 5-169 verificat ion . . . . . . . . . . . . . . . . . . . . 5-174 show . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-175 (br i) . . . . . . . . . . . . . . . . . . . . . . . . . . 5-177 ...

  • Carrier Access Network Device Axxius 800 - page 559

    Axxiu s 800 - R elease 2.2 Index - 7 Index D perfor mance command . . . . . . . . . 5-23 3 perfor mance history . . . . . . . . . . . 5-234 (ds3 ) . . . . . . . . . . . . . . . . . . . . . . . . . . 5-235 perfor mance . . . . . . . . . . . . . . . . . . 5-23 6 perfor mance history . . . . . . . . . . . 5-237 (fxo) . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 560

    Index - 8 Axxius 80 0 - Rel ease 2.2 Index D (ro ut er) dhcp server option command . . . . . . . 5-44 dns pro xy comman d . . . . . . . . . . . . . . 5-44 remote command . . . . . . . . . . . . . . . . 5-45 snmp com munity comman d . . . . . . . . 5-45 snmp t rap command . . . . . . . . . . . . . . 5-46 static dns host command . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 561

    Axxiu s 800 - R elease 2.2 Index - 9 Index E features . . . . . . . . . . . . . . . . . . . . . . 16-3 , 17-4 LEDs . . . . . . . . . . . . . . . . . . . . . . . 16-8 , 17-8 over vi ew . . . . . . . . . . . . . . . . . . . . 16-2 , 17-2 E Electro nics Protect ion Mode . . . . . . . . . . . . . 7-8 EMDW . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 562

    Index - 10 Axxius 800 - Release 2 .2 Index L L label DS0 connec t ion . . . . . . . . . . . . . . . . . . . . 5-74 FXSPS conn ection . . . . . . . . . . . . . . . . . 5-74 Router trunk con nection . . . . . . . . . . . . . 5-74 V.35 connection . . . . . . . . . . . . . . . . . . . 5-74 LEDs dual V.35 card . . . . . . . . . . . . . . . . 16-8 , 17 - ...

  • Carrier Access Network Device Axxius 800 - page 563

    Axxius 800 - Re lease 2.2 Index - 11 Index Q command . . . . . . . . . . . . . . . . . . . . . . . . . 5-63 pino ut s . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-11 10Base-T Et hernet . . . . . . . . . . . . . . . . . 15-1 7 10B ase- T e the rn et . . . . . . . 10-13 , 11- 6 , 14-9 Dual V.25 car d . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 564

    Index - 12 Axxius 800 - Release 2 .2 Index S connecto r pinout . . . . . . . . . . . . . . . . . . . 1-12 dat a port . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 rtrp in g co mma nd . . . . . . . . . . . . . . . . . . . . . 5-68 S security enhanced . . . . . . . . . . . . . . . . . . . . . . . . 5-110 Servic e Cards . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 565

    Axxius 800 - Re lease 2.2 Index - 13 Index S password command . . . . . . . . . . . . 5-120 pro mpt c om mand . . . . . . . . . . . . . 5-12 1 protoco lport comman d . . . . . . . . . 5-121 stopb its command . . . . . . . . . . . . . 5 -122 tbos map des cri pti on com ma nd . . . 5-1 22 tbos map di spla y com man d . . . . . . 5-123 type com mand . ...

  • Carrier Access Network Device Axxius 800 - page 566

    Index - 14 Axxius 800 - Release 2 .2 Index S enable/disable com mand . . . . . . . 5-163 port cost co mmand . . . . . . . . . . . . 5-164 por t pri or ity comm and . . . . . . . . . 5-164 trunk comman d . . . . . . . . . . . . . . . . . 5-165 up/d ow n co mman d . . . . . . . . . . . . . . 5-165 (v35 ) command . . . . . . . . . . . . . . . . . . . ...

  • Carrier Access Network Device Axxius 800 - page 567

    Axxius 800 - Re lease 2.2 Index - 15 Index S ppp comman d . . . . . . . . . . . . . . . . . . 5 -215 static ip address command . . . . . . . . . . . 5-216 ip network command . . . . . . . . . . . 5-216 ipx netw ork command . . . . . . . . . . 5-21 7 mac address command . . . . . . . . . 5-21 7 static mac add ress command . . . . . . . 5-218 stp co ...

  • Carrier Access Network Device Axxius 800 - page 568

    Index - 16 Axxius 800 - Release 2 .2 Index T stp co mmand . . . . . . . . . . . . . . . . . . . 5-252 (ro ut er- lan ) . . . . . . . . . . . . . . . . . . . . . . 5-253 (rou ter-trun k) command . . . . . . . . . . . . 5-254 (v54 ) command . . . . . . . . . . . . . . . . . . . 5-256 clock com mand . . . . . . . . . . . . . . . . . . . 5-230 equipmen ...

Manufacturer Carrier Access Category Network Card

Documents that we receive from a manufacturer of a Carrier Access Network Device Axxius 800 can be divided into several groups. They are, among others:
- Carrier Access technical drawings
- Network Device Axxius 800 manuals
- Carrier Access product data sheets
- information booklets
- or energy labels Carrier Access Network Device Axxius 800
All of them are important, but the most important information from the point of view of use of the device are in the user manual Carrier Access Network Device Axxius 800.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Carrier Access Network Device Axxius 800, service manual, brief instructions and user manuals Carrier Access Network Device Axxius 800. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Carrier Access Network Device Axxius 800.

Similar manuals

A complete manual for the device Carrier Access Network Device Axxius 800, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Carrier Access Network Device Axxius 800 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Carrier Access Network Device Axxius 800.

A complete Carrier Access manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Carrier Access Network Device Axxius 800 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Carrier Access Network Device Axxius 800, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Carrier Access Network Device Axxius 800, that we can find in the current document
3. Tips how to use the basic functions of the device Carrier Access Network Device Axxius 800 - which should help us in our first steps of using Carrier Access Network Device Axxius 800
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Carrier Access Network Device Axxius 800
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Carrier Access Network Device Axxius 800 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Carrier Access Network Device Axxius 800?

Use the form below

If you did not solve your problem by using a manual Carrier Access Network Device Axxius 800, ask a question using the form below. If a user had a similar problem with Carrier Access Network Device Axxius 800 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)