English dropdown-ico

Manual Pico Macom M7100

78 pages 1.12 mb
Download

Go to site of 78

Summary
  • Pico Macom M7100 - page 1

    Operator’s Manual MM102341V1 Rev. F, Sep/06 M7100 IP Series Mobile Radio ...

  • Pico Macom M7100 - page 2

    2 MA NUA L REVISION HISTORY REV DATE REASON FOR CHA NGE A Feb/04 Initial release. B Apr/04 Added MPE and FCC inform ati on for VHF, UHF-L, UHF-H , and 800MHz M7100 IP radios. C Jun/05 Added MPE, VHF maritim e cha nnel, and FCC information for 50W VHF mobile radio. Corrected P25 display information and added m otorcycle M PE inform ation for UHF, VH ...

  • Pico Macom M7100 - page 3

    3 NOTICE! This device is a RF transceiver intended for land mobile ra dio applications. This device may have use restrictions, which requ ire that the national authority be contacted for any system licensi ng requirements, fr equency use, allowable power level, etc. ...

  • Pico Macom M7100 - page 4

    4 TABLE OF CONTENTS Page 1 SAFETY SYMBOL CONVENTIONS .......................................................................................... 7 2 RF ENERGY EXPOSURE INFORMATION .............................................................................. 8 2.1 RF ENERGY EXPOSURE AWARENESS, CONTROL INFORMATION, AND OPERATION INSTRUCTIONS FOR FCC ...

  • Pico Macom M7100 - page 5

    5 TABLE OF CONTENTS Page 11.4 MENU ....................................................................................................................... 30 11.5 FEATURE ENCRYPTION DISPLAY ..................................................................... 34 11.6 SYSTEM/GROUP/C HANNEL SELECTION .................................................. ...

  • Pico Macom M7100 - page 6

    6 TABLE OF CONTENTS Page 15.5 MACRO KEY OPERATION.................................................................................... 67 15.6 INTERCONNECT CALL (SYSTEM MODEL ONLY) .......................................... 67 15.7 KEYPAD REMAPPING ........................................................................................... 67 GLOSSAR ...

  • Pico Macom M7100 - page 7

    7 1 SAFETY SYMBOL CONVENTIONS The following conventions are used to alert the user to general safety precautions that must be observed during all phases of operation, service, and repair of this product. Failu re to comply with these precautions or with specific warnings elsewhere violates safety standards of design, manufacture, and i ntended use ...

  • Pico Macom M7100 - page 8

    8 2 RF ENERGY EXPOSURE INFORMATION 2.1 RF ENERGY EXPOSURE AWARENESS, CONTROL INFORMATION, AND OPERATION INSTRUCTIONS FOR FCC OCCUPATIONAL USE REQUIREMENTS Before using your mobile tw o-way radio, read th is important RF energy awareness and control information and operational instructions to ensure compliance with the FCC’s RF exposure guidelines ...

  • Pico Macom M7100 - page 9

    9 2.2 COMPLIANCE WITH RF EXPOSURE STANDARDS Your M/A-COM, Inc. M 7100 IP mobile t wo-way radio is designed and te sted to comply with a number of national and internat ional standard s and guidelines (listed below) regardi ng human exposure to RF electromagnetic energy. This radio com plies w ith the IEEE and ICNIRP exposure limits for occupational ...

  • Pico Macom M7100 - page 10

    10 2.2.1 Mobile Antennas – Vehicle Installation Install the radio’s antenna (refer to Table 2-1 for applicable antenna part numbers) i n the center of the vehicle’s roof. These mobile antenna i nstallation guidel ines are limi ted to met al body m otor vehicles or vehicles with a ppropriate ground planes. The antenna installation should addit ...

  • Pico Macom M7100 - page 11

    11 Table 2-2: Rated Power and Recommended Mini mum Lateral Distance (Mo torcycle-Installed) RECOMMENDED MINIMUM LA TERA L DISTA NCE FROM TRA NSMITTING A NTENNA MOBILE RA DIO FREQUENCY SPLIT RA TED POWER OF MOTORCYCLE-INSTA LLED MOBILE TWO-WA Y RA DIO CONTROLLED UNCONTROLLED VHF 25 Watts, (136 MHz, Antenna P/N: SM-LE-OM150K.125/TNC) 54 cm 121 cm 25 ...

  • Pico Macom M7100 - page 12

    12 2.2.4 Contact Information For additional inform ation on exposure requirem ent s or ot her information, contact M/ A-COM, Inc. at 1-800-528-7711 or at http://www.macom -wireless.com . ...

  • Pico Macom M7100 - page 13

    13 3 OPERATION SAFETY RECOMMENDATIONS 3.1 TRANSMITTER HAZARDS The operator of an y mobile radio should be aware of certain hazards common to the operation of vehicular radio transmitters. A list of several possible hazards is given: • Heat Dissipation – When the M7100 m obile i s used for an extended period ti me in transm it m ode, the heat si ...

  • Pico Macom M7100 - page 14

    14 4 OPERATING RULES AND REGULATIONS Two-way FM radio systems must be operated in accordance with the ru les and regulations of the local, regional, or national governm ent. In the United States, the M7100 IP Series mobile radio m ust be opera ted in accordance with the rules and regulations of the Federal Com municat ions Comm i ssion (FCC ). As a ...

  • Pico Macom M7100 - page 15

    15 5 MARITIME CHANNELS As part of FCC Equipment Autho rization Part 80 licensing a maritime frequency usage p lan has been included in this manual for reference. ...

  • Pico Macom M7100 - page 16

    16 6 INTRODUCTION This manual describes how to use the M7100 IP Series Mobi le Radio. The M7100 IP is a synthesized, microprocessor-based, high performance m obile FM radio providi ng reliable two-way com muni cations in the E nhanced D igital A ccess C ommunicat ions S ystem (EDACS ® ) and P25 Trunking environment s, as well as, conventional com ...

  • Pico Macom M7100 - page 17

    17 7 USER INTERFACE The M7100 IP operating controls are locat ed on the radio's front panel (see Figure 7-1and Figure 7-2). A keypad, vacuum florescent display for radio stat us information and a m icrophone jack are on the front panel. The front panel also provides a rota ry SYSTEM/GROUP/CHANNEL knob, POWER ON- OFF/VOLUME control, a ram p up/ ...

  • Pico Macom M7100 - page 18

    18 8 CONTROLS This section describes the butt ons, keys and rotary knobs used to cont rol the M 7100 IP Series Mobile Scan and System M odel radios. All functi ons and contro ls of the Scan radio operate the same as the corresponding functions and controls on t he System radi o. The Scan radio is equi pped with a 4-button keypad and the System radi ...

  • Pico Macom M7100 - page 19

    19 8.5 SCAN ADD/DELETE This rocker type button i s used to display t he current SCAN status for a group/channel and then either add or delete the group/ channel from the syst em scan list . Pressing the add/delete button twice while the radio is actively receiving or three times when the radio is not receiving sel ects the last scanned channel (Las ...

  • Pico Macom M7100 - page 20

    20 A keylight (LED) is associated with each key or button. This can light when the associated function is active. In some condi tions, the keylight can blink to indicate an acti on status. The keypad key functions can be rem apped to any of the primary function key s using the PC program ming software. It is suggested that t he blank keypad (locate ...

  • Pico Macom M7100 - page 21

    21 DEL Secondary function - used to delet e a digit during num eric entry (see Secti on 11.2). M Primary function - accesses the menu list. Th is is a list of additional features that are not available directly from the keypad. See Section 11.4 for det ails. SELECT Secondary function - activates a selected it em within a lis t. After the menus l is ...

  • Pico Macom M7100 - page 22

    22 STO-ST9 The status 0-9 keys are used to send a pre-programm ed status message to the EDACS or P25 Trunked site. PVT The PVT key enables or disables Private M ode for the System /Group displayed. See the Private Operation section. KEY Displays the Encrypted Keys. This selects th e DISP KEY operation from the menu functi ons. G* This key function ...

  • Pico Macom M7100 - page 23

    23 9 DISPLAY The radio's display is shown in Figure 9-1. The two character lines are used to display system, group and channel names, and also operati onal messages. Each l ine contains eight alphanum eric character blocks. See Figure 7-2 for a typical displ ay. Figure 9-1: M7100 IP Series Mobile Radio Display 9.1 RADIO STATUS ICONS Status ico ...

  • Pico Macom M7100 - page 24

    24 9.2 MESSAGES During radio operation, various m essages are displaye d on either line 1 or line 2. Typical m essages include control channel status inform ation, such as system busy or call denied , or messages associated with the radio's operation, (i.e. vol ume adjust). These m essages are described as follows: Table 9-1: Display Messages ...

  • Pico Macom M7100 - page 25

    25 MESSA GE NAME DESCRIPTION NO KEY # Encryption Key Missing Flashing indicator indicates that no encryption key or an in correct encryption key is programm ed into the radio. BCKL=1-6 Backlight Indicates the display intensity and keypad backlight level. GR Group ID Indicates that the call is a group call and is followed by the GID of the caller (t ...

  • Pico Macom M7100 - page 26

    26 MESSA GE NAME DESCRIPTION (c) 2004 Displayed in line 2 when the m essage ‘M/A-COM’ is displayed in line 1 while displaying different items under the m enu wh en “REVISION” is selected by the operator. EM Emergency Indicates an emergency has been decl ared by the LID that follows the display, “EM.” An exam ple of this is “EM 01201.? ...

  • Pico Macom M7100 - page 27

    27 10 ALERT TONES The M7100 IP series mobile radio also provides audibl e alert tones or "beeps" to indicat e the various operating conditions. These alert tones can be enabled or disabled through program ming. 10.1 CALL ORIGINATE A short mid-pi tched alert tone sounds aft er keying t he radio (Push-To-Talk button i s pressed). This tone ...

  • Pico Macom M7100 - page 28

    28 10.9 PAGE (P25 TRUNKED ONLY) In P25 trunked mode, if the receiving radio accepts a page, both the receiving a nd transmitting radios emit three high-pitched tones. ...

  • Pico Macom M7100 - page 29

    29 11 OPERATION The M7100 IP Series mobil e radio unit can be program med to operate in a trunked system , a conventional system, a Project 25 (P25) conventional system , or any combinat ion of the three. Operati ng features and functions have been grouped according to the type of system the radio is operating in. This section contains general oper ...

  • Pico Macom M7100 - page 30

    30 some cases the information on lines 1 and 2 will be exchanged.) En ter the system selection mode by pressing the S key. If SYSTEM 2 is the current selection, the display ap pears as follows: S O U T H S Y S = 2 Line 1 contains the current system name, SOUTH; and l ine 2, SYS = 2, indicates that selection is from the system li st and it is the se ...

  • Pico Macom M7100 - page 31

    31 All of the selection mode rules prev iously detailed apply to th e menu item selection process with the exception of direct access. The radio will continue to receive and transmit norm ally while in the menu function. A new item is display ed by using the RAM P controls, , and . , to scroll through the li st in increasing and decreasing order. T ...

  • Pico Macom M7100 - page 32

    32 Table 11-1: Menu Item Information FEAT URE DISPLAY PARA METER SETTINGS COMMENT Backlight Adjust Menu Item: BCKLIGHT Once selected: BCKL= OFF, 1, 2, 3, 4, 5, 6 Selects the light level for backlighting. Radio Revision Information Menu item : REVISION Informational displays only (see radio); no user selectable settings. Selects the information disp ...

  • Pico Macom M7100 - page 33

    33 FEAT URE DISPLAY PARA METER SETTINGS COMMENT Last Scanned Channel Recall Menu Item: SCAN ADD Press twice when actively receiving; three times when not receiving. Scan icon displayed. Changes the selected channel to the last scanned channel. Home gr oup or channel selection Menu item: HOME Once selected: Home group or channel displayed. Changes t ...

  • Pico Macom M7100 - page 34

    34 11.5 FEATURE ENCRYPTION DISPLAY Feature Encryption Displa y is available t hrough the menu funct ion and, if programm ed, appears in t he menu as " FEATURES ." This dat a indicates current features program med into the radio as well as information requi red to add features to the radio. This feature applies to 512K RAM radi os only. On ...

  • Pico Macom M7100 - page 35

    35 • CH# XXX - Maxim um number of convent ional channels availa ble The user needs to know the lim its of his radio before atte mpting to enable other feat ures. The numbers shown here are for exam ple only. 11.5.3 Features Enabled These numbers indicate which features are enabled. Example: Table 11-2 lists possibl e features available in the use ...

  • Pico Macom M7100 - page 36

    36 11.6 SYSTEM/GROUP/CHANNEL SELECTION In the following descripti on of SYSTEM/GROUP/CHANNEL SELECTION , the term group is used for both group and channel. The M7100 IP SYSTEM/GROUP/CHANNEL knob and the RAMP control s, , and . , are programma ble for maximum flexibility. If the SY STEM/GROUP/CHANNEL knob is assigned to select groups, then the RAMP ...

  • Pico Macom M7100 - page 37

    37 METHOD 3: Press g to enter the group select mode and fol low the select ion mode rules detailed earlier. Pressing the RAMP cont rols will now scroll through different groups. 11.7 LAST SYSTEM/GROUP/CHANNEL RECALL This feature, enabled through ProGramme r, allows the us er to recall the last sel ected system/group after an emergency or hom e func ...

  • Pico Macom M7100 - page 38

    38 12 TRUNKED MODE OPERATION Digital trunking provides fast communi cation access at all times, even during busy hours. In this m ode, the operator selects a comm unications system and group and the audio comm unication or working channel (WC) is allocated through digit al signaling wit h the site. 12.1 RECEIVING A CALL 1. Turn the radio on by rota ...

  • Pico Macom M7100 - page 39

    39 Emergency and Special Call are not operational during conventional failsoft. In addition, the g control will not operate. 12.4 EMERGENCY OPERATION The radio's ability to declare an emergency, clear an emergency, remain locked on an emergency and group, and the emergency audio and display freeze can each be enabled or disabled through progra ...

  • Pico Macom M7100 - page 40

    40 12.5.2 ProScan The radio can b e programmed for ProScan™ system scan operation for multi-site applications depending o n the version of rad io flash code. ProScan pro vides the radio with the ability to select a new system for the radio to com municate on, when the selected system drops below a predefined level. This is accomp lished by enabli ...

  • Pico Macom M7100 - page 41

    41 12.6 GROUP SCAN OPERATION Only Groups that are part of the radio's scan list will be scanned. Groups are added to the scan list on a per system basi s through programm ing, the radio keypad, or both, dependent upon progr amming. This scan li st can be changed by the user from the keypad unless pr ogramm ed otherwise. Each system's grou ...

  • Pico Macom M7100 - page 42

    42 2. Press < or > on the SCAN add/delet e control. The current status of t he group is displayed for a ti me-out period. 3. Press > to delete the group from the scan list. "S" , "2" or "1" turns off. Any group that is not in a trunked system group scan list will show a "blank" for the time period wh ...

  • Pico Macom M7100 - page 43

    43 12.7 INDIVIDUAL CALLS 12.7.1 Receiving and Responding to an Individual Call When the radio receives an individual call (a call directed only to the user's radio), it unmutes on the assigned working channel and turns on the BSY indi cator. Line 1 shows “ID” followed by the logical ID num ber of the radio sending the me ssage, or the asso ...

  • Pico Macom M7100 - page 44

    44 12.7.2 Call Storage Lists There are two lists available for call storage in the radio, the ca lls received list (1-10) and the personality list (1-99 as d efined b y the user). W hen the individual call mode is entered by pressing i , the calls received list is available. The user can toggle to the personality list by selecting any key other tha ...

  • Pico Macom M7100 - page 45

    45 12.9 TELEPHONE INTERCONNECT CALLS 12.9.1 Receiving a Telephone Interconnect Call (Trunked Mode Only) Receiving a telephone interconnect call is identical to receiving an individual call. See the DTMF Overdial Operation section if access to servi ces requiring "over-dial" is needed. Overdial operations are available for any special call ...

  • Pico Macom M7100 - page 46

    46 operator in the first ten phone list entrie s. These numbers are accessed by pressing p then following the selection mode rules. The following steps are required to dial these numbers: 1. Follow the procedure in Sending a Telephone Interconnect Call (Trunked Mode Only ) to establish a connection to the tel ephone system or consul t the system ad ...

  • Pico Macom M7100 - page 47

    47 The mobile radios can be connected to Mobile Data Term inals (MDT) or to a host computer. Any RS-232 compatible device that supports the Radio Data Inte rface (RDI) protocol (Versi on 1.91 or greater) can be connected to the mobi le radio. Support for MDTs or host com puters is a programmable opti on per radio. Additionally , radios programm ed ...

  • Pico Macom M7100 - page 48

    48 12.10.4 Exiting Data Calls Under normal conditi ons, the radio enters the scan lockout m ode and returns to the control channel after completion of a data call (transmit or receive). If, during a data call, one of the following cond itions occurs, the data call is immediately terminated and the radio performs the desired function: • The PTT is ...

  • Pico Macom M7100 - page 49

    49 • Pressing the PTT while in Publi c Address mode. • Turning scan ON with the SCAN bu tton. 12.11 STATUS/MESSAGE OPERATION Status and message operat ion is possible wit h either the Scan or System version of t he M7100 IP Series mobile radi o unit. The following procedure is applicable for the Sy stem versi on. For operation with the Scan ver ...

  • Pico Macom M7100 - page 50

    50 the n keylight remains lit. If the site does not recei ve the message properly, a low-pitched tone sounds and the n keylight will blink. If an incorrect message text was selected or th e incorrect number butt on was pressed, the message text can be changed during the pre-program me d time-out period by pressing another num ber button. The messag ...

  • Pico Macom M7100 - page 51

    51 3. Using , or . , scroll through the list of available IDs and sel ect the desired ID with t he M key. ProGramm er provides dialogs for entering and edi ting canned messages, form s and replies, as well as certain fixed informat ion related to Ra dio TextLink. ProGramm er also manages t he list of MIDs and certain addresses needed for Radio Text ...

  • Pico Macom M7100 - page 52

    52 13 CONVENTIONAL MODE OPERATION The radio functions in the conventi onal mode when using conventional com municati ons channels (non- trunked). Each channel consists of a preset freque ncy pair for transmit and receive during repeater operation or a single frequency for bot h transmit and receive during talk-a round (no repeater) operation. To us ...

  • Pico Macom M7100 - page 53

    53 METHOD 1: G-STAR is transmitted on the selected chan nel. If the channel is chang ed the emergency signaling will contin ue to be transmitted on the newly selected ch annel. METHOD 2: Same as METHOD 1 but the radio will lock on to the currently sel ected channel. Any attempts to change the system or channel will b e d isabled. METHOD 3: G-STAR i ...

  • Pico Macom M7100 - page 54

    54 to continue scanning upon the detection of the wrong Ch annel Guard on a priori ty channel. The user can then select the rate at which this ch annel is scanned until th e call ends. 13.4.1 Adding Channels To A Scan List 1. W ith scan operation turned OFF select the de si red channel to add to the selected conventi onal system channel scan list. ...

  • Pico Macom M7100 - page 55

    55 • Pressing the PTT button when scan is ON will cause the radio to transmit on the displayed channel or to the currently sel ected channel depending on program ming. • Pressing < when scan is ON will cause the radio to recall the scanned channel that was last received. This channel is recalled for a period equal to the scan hang time. 13.6 ...

  • Pico Macom M7100 - page 56

    56 3. If the c key is pressed before the time-out, the squelch level will not be updated and the original value will b e restored. 13.8 TYPE 99 DECODE If the Type 99 Decode Option has been pre-program med, indi vidual selective call ing is possible. The radi o can now decode individual, group or supergroup paging call s. Two sets of Type 99 paging ...

  • Pico Macom M7100 - page 57

    57 13.9 DIRECT MODE OPERATION The direct mode (or talk-around) provides short range, line of sight com municati ons. One of the buttons on the control unit m ust be pre-programm ed for this feature t o function. 1. Make sure the radio is ON and then select the desired convent ional system and channel. 2. Press the pre-programmed butt on to toggle t ...

  • Pico Macom M7100 - page 58

    58 14 PROJECT 25 (P25) CONVENTIONAL OPERATION 14.1 GROUP CALLS IN P25 MODE 14.1.1 Transmitting a Group Call 1. Select the desired P25 system . 2. Select the Talk Group/Conventional Channel. (Selected sim ultaneously using ei ther the system/ group/channel knob or the group key.) 3. Press and hold the PTT. 4. When a grant tone is received (if enable ...

  • Pico Macom M7100 - page 59

    59 14.3 EMERGENCY GROUP CALLS IN P25 MODE There is no method available for a system -wide Emergency clear. An emergency group call must be cleared on each individual radio. 14.3.1 Declaring an Emergency Group Call 1. Select the desired P25 system and Talk Group/Channel. 2. Press the red emergency button on th e top of the radio. Th e radio will bro ...

  • Pico Macom M7100 - page 60

    60 15 TRUNKED OR CONVENTIONAL MODE OPERATION 15.1 SIREN/LIGHT OPERATION Each siren/light key is designed to control an optional siren/ligh t package. Pressing a siren/light k ey will light the key indicator. Each siren/light key (except RESET) can be program med for either CANCEL or ADDITIVE operation. If programm ed for CANCEL, then all other sire ...

  • Pico Macom M7100 - page 61

    61 Conventional Aegis or encry pted channels require Channel Guard on the channel to operate correctly. 15.2.2 Clear Modes Aegis clear and ProVoice clear modes are identical voice m odes in which the radio transm its and receives only clear (analog) voice signals. Th ese analog signals are non-digitized and non- encrypted. Clear mode transm issions ...

  • Pico Macom M7100 - page 62

    62 Power Up Only If the Aegis or ProVoice circuit board i s not responding, correctly, one of t he following error messages will be displayed and the radio n eeds servicing: HARDWARE ERR= 3X 3X will be a number between 30 and 38 15.2.4 Aegis Private, ProVoice Private, and Voice Guard 1 Private Modes The Aegis and ProVoice private m odes allow the r ...

  • Pico Macom M7100 - page 63

    63 Table 15-2: Current Cryptographic Key Display ENCRYPTION KEY DISPLAYED MESSAGE DISPLAYED System "SYS KEY" "KEY = 1" Group/Channel "GRP KEY"/"CHN KEY" "KEY = 2"/KEY = 2" 15.2.4.2 Key Zero All cryptographic key s can be zeroed (erased from radio mem ory) by pressing the c but ton (System Model ...

  • Pico Macom M7100 - page 64

    64 15.2.5.3 Scanned Group Calls Receiving a scanned group call is the same as r eceiving a selected group call. During the scan hang time, if the radio was prog ramm ed for auto-select, it will transmit back in th e same m ode it received the call. For example, if a clear group is entered in the scan list, it will only receive clear calls. If the s ...

  • Pico Macom M7100 - page 65

    65 15.3.2.1 Slaved Mode Operation In Slaved mode, eit her controller can operate t he radio with no change in Syst em and Group settings when control is switched . Both controllers display the current info rmation. If a key is pressed at the idle controll er, other than PTT, E , “ E ,” or siren and li ght keys as not ed in following paragraphs, ...

  • Pico Macom M7100 - page 66

    66 15.4.1 Changing Selected Radio A radio unit can be selected by pressi ng the radio selection but ton (pre-programm ed) on the control unit. In additi on, a button can be pre-programm ed to rotate selection through t he radio units. For ex ample, if radio #1 is selected, pressing the rad io selection button will select radio # 2. Similarly, radio ...

  • Pico Macom M7100 - page 67

    67 N ote that the PA and External Speaker functions operate only on the Master radio. 15.4.1.5 Multiple Radio and Data Operation Only the m aster radio supports m obile data operati on. 15.5 MACRO KEY OPERATION Macro key operation permits the user to accomplish a se ries of keystrokes with a single "macro" keystroke. Up to ten (10) macro ...

  • Pico Macom M7100 - page 68

    68 Figure 15-1: M7100 IP System Model Keypad Figure 15-2: M7100 IP Scan Model Keypad ...

  • Pico Macom M7100 - page 69

    69 GLOSSARY Agency - An agency is composed of multiple fleets. Units can be programm ed to initiate agency calls to access multiple fleets (Trunked Mode Only). Base/Unit Operation - A programmed opt ion used in some fl eets so units can only hear and talk to a base dispatch unit, not to ot her mobile s or personals in the group. In this mode of ope ...

  • Pico Macom M7100 - page 70

    70 Talk-around Mode - Also referred to as "direct mode," talk-a round provides a direct unit-to-uni t short-range comm unications link. It is intended to m aintain com municat ions outside of the m ain system coverage area. Telephone Inter- Connect - This feature allows the user to initiate or receive telephone calls through the radio i f ...

  • Pico Macom M7100 - page 71

    71 RADIO SETUP RADIO TYPE: FREQUENCY BAND: OPERATOR'S NAME: EMERGENCY GROUP: SYSTEM NUMBER SYSTEM NA ME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Pico Macom M7100 - page 72

    72 SYSTEM NUMBER SYSTEM NA ME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Pico Macom M7100 - page 73

    73 SYSTEM NUMBER SYSTEM NA ME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Pico Macom M7100 - page 74

    74 SYSTEM NUMBER SYSTEM NA ME TRK/CNV GRP/CHN NUMBER GRP/CHN NAME USE ...

  • Pico Macom M7100 - page 75

    75 NOTES ...

  • Pico Macom M7100 - page 76

    76 NOTES ...

  • Pico Macom M7100 - page 77

    77 WARRANTY A. M/A-COM, Inc. (hereinafter "Seller") warrants to the original purchaser for use (hereinafter "Buyer") that Equipment manuf actured by or for the Seller shall be free from defects in material and workmanship, and shall conform to its published specifications. With respect to all non-M/A-COM Equipment, Seller gives ...

  • Pico Macom M7100 - page 78

    M/A-COM Wireless Systems 221 Jefferson Ridge Parkway Lynchburg, Virginia 24501 (Outside USA, 1-434-385- 2400) Toll Free 1-800-528-7711 www.macom- wireless.com Printed in U.S.A. ...

Manufacturer Pico Macom Category Weather Radio

Documents that we receive from a manufacturer of a Pico Macom M7100 can be divided into several groups. They are, among others:
- Pico Macom technical drawings
- M7100 manuals
- Pico Macom product data sheets
- information booklets
- or energy labels Pico Macom M7100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pico Macom M7100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pico Macom M7100, service manual, brief instructions and user manuals Pico Macom M7100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pico Macom M7100.

Similar manuals

A complete manual for the device Pico Macom M7100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pico Macom M7100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pico Macom M7100.

A complete Pico Macom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pico Macom M7100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pico Macom M7100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pico Macom M7100, that we can find in the current document
3. Tips how to use the basic functions of the device Pico Macom M7100 - which should help us in our first steps of using Pico Macom M7100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pico Macom M7100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pico Macom M7100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pico Macom M7100?

Use the form below

If you did not solve your problem by using a manual Pico Macom M7100, ask a question using the form below. If a user had a similar problem with Pico Macom M7100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)