English dropdown-ico

Manual Videk 2030

98 pages 6.07 mb
Download

Go to site of 98

Summary
  • Videk 2030 - page 1

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver . 3.1.1000, August 3, 2007 - 1 Save Settings User Manual Part Number K1 1020, Rev . E, August 3, 2007 This version of the manual supports rmware 3.1.1000 and greater . ...

  • Videk 2030 - page 2

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - ii Save Settings Statement of Agency Compliance The VS 2030 can be set to use targeting lasers. The VS 2030’ s targeting laser emits Class 2M radiation outside of the product per IEC 60825-1. Class 2M Laser/LED product. Do not stare into beam or view direc ...

  • Videk 2030 - page 3

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - iii Save Settings VisionSensor 2030 User Manual Copyright © 2007 Videk, Inc. All Rights Reserved. The software described in this manual may only be used in accordance with the terms of its license agreement. No part of this publication may be reproduced in ...

  • Videk 2030 - page 4

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - iv Save Settings T able of Contents Chapter 1 - Getting Started ............................................................................................................... 1 1.1 - Introduction ............................................................. ...

  • Videk 2030 - page 5

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - v Save Settings Chapter 3 - VS 2030 Programming: Symbology Settings ............................................................ 26 3.1 - Introduction ........................................................................................................... ...

  • Videk 2030 - page 6

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - vi Save Settings Chapter 6 - Adding a Prex or Sufx and Reader T ext Commands ............................................ 49 6.1 - Prex Settings ........................................................................................................ ...

  • Videk 2030 - page 7

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 1 Save Settings Chapter 1 - Getting Started ...

  • Videk 2030 - page 8

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 2 Save Settings 1.1 - Introduction The VisionSensor 2030 (VS 2030) establishes a new benchmark for Por- table Data T erminals and Hand Held Computers by combining the indus - try’s best imaging technology with a graphic display and rugged keyboard to creat ...

  • Videk 2030 - page 9

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 3 Save Settings 1.2 - Unpacking 1.3 - Powering On/Off Reader Remove the VS 2030 from its packing and inspect it for damage. If the scanner was damaged during shipping, please call Videk at (585) 292-6210 or (800) 24-VIDEK. The standard VS 2030 unit is shippe ...

  • Videk 2030 - page 10

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 4 Save Settings 1.4 - Keypad/Icon Overview The chart below shows key/button functions. Description of Button Function Key Numeric Mode Upper Case T ext Mode Lower Case T ext Mode Symbol Mode T oggles between numeric characters, upper case text, lower case te ...

  • Videk 2030 - page 11

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 5 Save Settings The chart below shows all of the icons and their denitions. Icon Description Power Icons 50% to 100% capacity of battery 20% to 50% capacity of battery 0% to 20% capacity of battery – recharge battery as soon as possible Battery is recha ...

  • Videk 2030 - page 12

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 6 Save Settings 1.5 - Batch Operation 1.5.1 - Introduction Batch data storage and data transfer are controlled by the resident JavaScript application on your VS 2030 reader . Under the default factory settings, batch mode is enabled. When the VS 2030 is NOT ...

  • Videk 2030 - page 13

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 7 Save Settings 1.6 - Cabled Operation 1.6.1 - Introduction The VS 2030 is available with USB and RS232 cables. All of the cables are connected to the VS 2030 with an 8-pin DIN connector . Different cables may be required for dif ferent hosts. T o install a ...

  • Videk 2030 - page 14

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 8 Save Settings 1.6.2 - USB Cable Installation Guide T o connect the VS 2030 to your host computer via USB interface: 1. Make sure the USB cable is sufciently attached to your VS 2030 unit. 2. Y ou DO NOT need to power off your host computer . The VS 2030 ...

  • Videk 2030 - page 15

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 9 Save Settings 1.6.2.1 - USB Communication Settings USB Keyboard Mode - Data is sent from the Reader and interpreted by the host just as if a US keyboard was being used to enter data. USB Downloader - This mode is the standard way of transferring batch l ...

  • Videk 2030 - page 16

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 10 Save Settings If you are using the RS232 interface and utilizing Batch functionality , please read the Important Note in batch section. If you are using the 1950 mAH battery for batch mode, the RS232 cable will recharge the VS 2030 battery only if the RS2 ...

  • Videk 2030 - page 17

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 11 Save Settings 1.6.3.1 - RS232 Communication Data Bit Settings Scan the following codes to set the appropriate data bit: 7 Data Bits 8 Data Bits (Default) 1.6.3.2 - RS232 Communication Stop Bit Settings Scan the following code to set the appropriate stop b ...

  • Videk 2030 - page 18

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 12 Save Settings 1.6.4 - Cabled Reader - Time Out Settings Scan one of the codes below to set the amount of time a cabled VS 2030 will be enumerated before entering sleep mode. The battery is re-charged at the fastest rate when VS 2030 is in sleep mode: Cabl ...

  • Videk 2030 - page 19

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 13 Save Settings 1.7 - Reader Feedback Guide The chart below shows potential icon combinations. Consult the chart to verify a conguration. Possible VS 2030 Congurations RS232 USB RS232 One W ay Mode This mode is the standard way of transferring unforma ...

  • Videk 2030 - page 20

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 14 Save Settings T o read a symbol with the VS 2030: 1. The VS 2030 features omnidirectional decoding. Center the symbol in any orientation within the laser dot aiming pattern. Note: The VS 2030 can read a symbol that is not centered; however , the VS 2030 p ...

  • Videk 2030 - page 21

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 15 Save Settings SXGA Imaging Area VGA Imaging Area 1.9 - Imager Field of V iew and Resolution The VS 2030’s dual eld optical system may be modied based on your scanning environment. The VS 2030’s megapixel imager may be set to the following three ...

  • Videk 2030 - page 22

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 16 Save Settings 1.10 - Decode Zone ...

  • Videk 2030 - page 23

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 17 Save Settings 1.1 1 - Removing and Attaching Handle The battery-handle must be attached to the VisionSensor 2030 for proper operation. The battery automatically charges every time the USB interface is attached to the VisionSensor 2030 and the host PC is p ...

  • Videk 2030 - page 24

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 18 Save Settings Chapter 2 - Optimization and T rigger Programming ...

  • Videk 2030 - page 25

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 19 Save Settings 2.1 - Introduction The VS 2030 comes pre-congured with Dynamic Optimization T echnology (DOT), a revolutionary adaptive read technique that eliminates the need to manually set most individual parameters. From the moment you turn on your V ...

  • Videk 2030 - page 26

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 20 Save Settings Far Field (FF) : The farthest eld of the VS 2030’ s two image elds. The Far Field has the lowest reso - lution (480 x 320 DPI). It has an optimal focal point of 9” (228.6 mm) away from the lens of the reader with a 4” wide eld ...

  • Videk 2030 - page 27

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 21 Save Settings 2.4 - Left T rigger Programming Scan the following codes to set the left trigger functionality: Read Codes with Both Imagers (Default) Read with Far-Field Imager ONL Y Read with Near-Field Imager ONL Y T ake Picture 2.3 - Left T rigger Optim ...

  • Videk 2030 - page 28

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 22 Save Settings 2.6 - Right T rigger Programming Scan the following codes to set the right trigger functionality: Read Codes with Both Imagers (Default) Read Code with Far-Field Imager ONL Y Read Code with Near-Field Imager ONL Y T ake Picture 2.5 - Right T ...

  • Videk 2030 - page 29

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 23 Save Settings Scan the following codes to set the handle trigger functionality: Read Codes with Both Imagers (Default) Read Code with Far-Field Imager ONL Y Read Code with Near-Field Imager ONL Y T ake Picture 2.8 - Handle T rigger Programming 2.7 - Handl ...

  • Videk 2030 - page 30

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 24 Save Settings 2.9 - Continuous T rigger Optimization Matrix 2.10 - Continuous Scan Scan the following codes to turn continuous scanning on/off: Both Near & Far Field On Near Field Only On Far Field Only On Off (Default) Note: This function is only rec ...

  • Videk 2030 - page 31

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 25 Save Settings 2.1 1.1 - Continuous Scan - Sleep Time Out Scan one of the codes below to set the amount of time a cabled VS 2030 will operate in continuous scan mode before entering sleep mode: Cabled - 2 hours Cabled - Always (Default) Scan one of the cod ...

  • Videk 2030 - page 32

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 26 Save Settings Chapter 3 - VS 2030 Programming: Symbology Settings ...

  • Videk 2030 - page 33

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 27 Save Settings 3.1 - Introduction The following chapter will allow a user to change the symbology settings on the VS 2030. T o reset the unit to factory defaults or to save the current settings please scan one of the codes below: Save Settings Reset to USB ...

  • Videk 2030 - page 34

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 28 Save Settings 3.4 - Codablock F Symbology Scan the following codes to enable/disable Codablock F symbology settings: Codablock F On Codablock F Off (Default) Sample Codablock F Code Note: When Codablock F and Code 128 decoding are enabled, there is some d ...

  • Videk 2030 - page 35

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 29 Save Settings 3.8 - Code 128 Symbology Scan the following codes to enable/disable Code 128 symbology settings: Code 128 On (Default) Code 128 Off Code 128 Short Margin On Code 128 Short Margin Off (Default) Sample Code 128 Code 3.7 - Code 93 Symbology Sca ...

  • Videk 2030 - page 36

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 30 Save Settings 3.9 - Composite Symbologies Scan the following codes to enable/disable Composite symbology settings: Composite On Composite Off (Default) Data Matrix Inverse On Data Matrix Inverse Off (Default) Sample Data Matrix Code Sample Data Matrix Cod ...

  • Videk 2030 - page 37

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 31 Save Settings Scan the following codes to enable/disable Interleaved 2 of 5 symbology settings: Int 2 of 5 On (Default) Int 2 of 5 Off Int 2 of 5 T wo Digits On Int 2 of 5 T wo Digits Off Int 2 of 5 Four Digits On Int 2 of 5 Four Digits Off Sample Int 2 o ...

  • Videk 2030 - page 38

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 32 Save Settings 3.14 - Micro PDF417 Symbology Scan the following codes to enable/disable micro PDF 417 symbology settings: MicroPDF417 On MicroPDF417 Off (Default) Sample MicroPDF417 Scan the following codes to enable/disable Matrix 2 of 5 symbology setting ...

  • Videk 2030 - page 39

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 33 Save Settings 3.17 - PDF 417 Symbology Scan the following codes to enable/disable PDF 417 symbology settings: PDF 417 On (Default) PDF417 Off Macro PDF 417 On Macro PDF 417 Off (Default) Sample PDF 417 Code 3.16 - NEC 2 of 5 Symbology Scan the following c ...

  • Videk 2030 - page 40

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 34 Save Settings Scan the following codes to enable the appropriate Postal symbology: Note: If you wish to change which Basic Postal code is activated, you MUST scan the disable all postal codes symbol and then scan your desired symbology . EXCEPT for the Ad ...

  • Videk 2030 - page 41

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 35 Save Settings The USPS 4-State Customer Barcode is also known as the OneCode, 4-CB, or USPS 4-State. The default data output for UK ID T ag decodes follows a unique format that requires a special license, please contact Videk for further information Scan ...

  • Videk 2030 - page 42

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 36 Save Settings Scan the following codes to enable/disable RSS symbology settings: RSS Limited On RSS 14 and RSS 14 T runcated On RSS 14 Stacked On RSS Expanded On All RSS On All RSS Off (Default) 3.22 - RSS Symbology 3.21 - QR Code Symbology Scan the follo ...

  • Videk 2030 - page 43

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 37 Save Settings Scan the following codes to enable/disable T elepen symbology settings: T elepen On - Default T elepen Off Sample T elepen 3.23 - T elepen Symbology 3.24 - UPC/EAN/JAN Scan the following codes to enable/disable UPC/EAN/JAN symbology settings ...

  • Videk 2030 - page 44

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 38 Save Settings Chapter 4 - Reader Feedback and Special Settings ...

  • Videk 2030 - page 45

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 39 Save Settings 4.1 - V olume and Vibration Settings Scan the following codes to set vibration mode: Vibrate On / Beep On Vibrate On / Beep Off Vibrate Off / Beep On (Default) Scan the following codes to set your reader ’s volume: Beep Off Beep Low Beep H ...

  • Videk 2030 - page 46

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 40 Save Settings The reader will store the rule and reset, but will not output the Readability Index until the Readability Index Output Enable code is read. The Readability Index is enabled by rst reading a CodeXML rule into the permanent VS 2030 Memory: ...

  • Videk 2030 - page 47

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 41 Save Settings 4.4 - Backlight T imeout Settings 4.5 - Laser Settings Scan one of the following codes to set the brightness of the VS 2030 laser . High (Default) Medium Low Scan the following codes to turn laser targeting on/off: On (Default) Off Scan the ...

  • Videk 2030 - page 48

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 42 Save Settings T o nd out the Reader ID and rmware version, plug your VisionSensor 2030 into your USB or RS232 cable, open a text editor program (i.e. Notepad, Microsoft Word...) and read the following code: Reader ID and Firmware Y ou will get a tex ...

  • Videk 2030 - page 49

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 43 Save Settings Scan the following codes to set appropriate keyboard mapping: US English (Default) US English - Leading 0 US English - ctrl + char No Leading 0 French German Japanese Universal Keyboard Custom Keyboard 4.9 - Keyboard Support Requests map to ...

  • Videk 2030 - page 50

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 44 Save Settings Chapter 5 - Advanced Decode Performance ...

  • Videk 2030 - page 51

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 45 Save Settings 5.2 - Set T argeting Zone T olerances 50 Most Accurate 75 100 125 150 200 400 1600 (Default) Least Accurate The targeting zone is the area around the outside of the code that is viewed by the imager . The values of each of the following code ...

  • Videk 2030 - page 52

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 46 Save Settings 5.3 - Windowing If only one size of bar code is being scanned in an application, the VS 2030 can be optimized to reduce processing time by adjusting the viewing frame within the eld of view of the image (ONL Y FOR SXGA MODE). By reducing ...

  • Videk 2030 - page 53

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 47 Save Settings 1-Dimensional Codes ONL Y (1024 X 200 pixels) Caution: It may be more difcult to read other codes while in this setting. Y ou must have the reader farther away than normal. Small 2-Dimensional Codes (480 x 480 pixels) Medium 2-Dimensional ...

  • Videk 2030 - page 54

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 48 Save Settings 5.4 - VGA & Megapixel Settings User ’s may optimize the VS 2030’ s megapixel (SXGA) imager (1280 x 1024) to VGA (640 x 480). This feature is used to decrease the pixel sampling area, which will greatly increase processing speed. This ...

  • Videk 2030 - page 55

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 49 Save Settings Chapter 6 - Adding a Prex or Sufx and Reader T ext Commands ...

  • Videk 2030 - page 56

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 50 Save Settings 6.1 - Prex Settings If you scan the following codes, you will lose any unsaved settings. Make sure to save settings on your reader before scanning the prex codes. If you scan more than one prex you will receive each scanned prex ...

  • Videk 2030 - page 57

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 51 Save Settings Sufx - T ab Sufx - T ab Sufx - Erase / None 6.4 - Reader T ext Commands Enabling Reader T ext Commands allows the VS 2030 to accept text commands via RS232 com- munication. Scan the following codes to enable/disable reader text comm ...

  • Videk 2030 - page 58

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 52 Save Settings Chapter 7 - VS 2030: Maintenance and T roubleshooting ...

  • Videk 2030 - page 59

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 53 Save Settings 7.1 - Reset Reader to Factory Defaults Scan the following codes to reset reader: Reset to USB Factory Reset to RS232 Factory Default Settings Default Settings Bootloader Mode Clear All CodeXML Rules Clear All Stored Data Save Settings Pre ...

  • Videk 2030 - page 60

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 54 Save Settings Lithium Ion Battery - W arning: Charge the battery with Videk cables ONL Y . Do not open battery , dispose of in re, or short circuit - it may ignite, explode, leak, or get hot causing personal injury . 7.3 - W arranty Videk, Inc.’ s Vi ...

  • Videk 2030 - page 61

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 55 Save Settings 7.4 - VS 2030 Accessories Customer accepts full responsibility for its software and data including the appropriate backup thereof. Repair or replacement of a product during warranty will not extend the original warranty term. Videk’ s Cust ...

  • Videk 2030 - page 62

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 56 Save Settings 7.6 - VS 2030 Maintenance The VS 2030 device operates efciently and reliably and needs only a minimum of maintenance to operate. A few tips are given below for maintenance suggestions. Cleaning the VS 2030 Window The VS 2030 window should ...

  • Videk 2030 - page 63

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 57 Save Settings Appendix A - Reader Specications ...

  • Videk 2030 - page 64

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 58 Save Settings Field of View: Near: 21.5º horizontal by 16.2º vertical Far: 22.9º horizontal by 1 1.6º vertical Focal Point: Near: approximately 4”; Far: approximately 9” Sensor: Progressive Scan CMOS 1.33 MP (1024x1280) 256 level gray scale Optica ...

  • Videk 2030 - page 65

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 59 Save Settings User Environment Operating T emperature: 0 ° to 40 ° C/32 ° to 104 ° F Storage T emperature: -20 ° to 60 ° C/-4 ° to 140 ° F Humidity: 5% to 95% non condensing Decode Capability: Posnet, Planet, 4-CB, IDT ag/S18D, UK ID T ag, Japanes ...

  • Videk 2030 - page 66

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 60 Save Settings Appendix B - Mechanical & Electrical Specications ...

  • Videk 2030 - page 67

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 61 Save Settings Dimensions FOR REFERENCE ONL Y ...

  • Videk 2030 - page 68

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 62 Save Settings USB Connector - Pin Out Diagram ...

  • Videk 2030 - page 69

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 63 Save Settings 8 Pin DIN Connector - Pin Out Diagram ...

  • Videk 2030 - page 70

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 64 Save Settings RS232 Connector - Pin Out Diagram ...

  • Videk 2030 - page 71

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 65 Save Settings Appendix C - Pharmacode Settings ...

  • Videk 2030 - page 72

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 66 Save Settings The Pharmacode symbology is prone to errant results caused by other objects within the eld of view of a Code Reader . Therefore, all possible measures should be taken to minimize errors. Measures include: • Setting the minimum and maxim ...

  • Videk 2030 - page 73

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 67 Save Settings Enable Pharmacode - Color Bars Expected, Horizontal Orientation and Reverse (right to left) Decoding Enable Pharmacode - No Color Bars, V ertical Orientation and Reverse (right to left) Decoding Enable Pharmacode - Color Bars Expected, V ert ...

  • Videk 2030 - page 74

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 68 Save Settings Appendix D - Factory Default Settings ...

  • Videk 2030 - page 75

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 69 Save Settings Default Settings The following are the primary default settings for your VisionSensor 2030. Refer to the manual text for secondary default settings that relate to specic code types or other reader attributes. Symbology Defaults: Aztec ... ...

  • Videk 2030 - page 76

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 70 Save Settings RS-232 Interface Setting Defaults Y ou must scan the RS-232 commuincation settings code to switch the reader in RS-232 communi - cation mode. When enabled your unit will default to the following settings: Mode: RS232 One W ay Mode Baud Rate: ...

  • Videk 2030 - page 77

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 71 Save Settings Appendix E - Programming Codes ...

  • Videk 2030 - page 78

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 72 Save Settings Batch Settings Batch Send & Buffer Mode - Default .............................................................................................................................. 79 (A1) Batch - Log Only Mode .............................. ...

  • Videk 2030 - page 79

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 73 Save Settings Sufx - T ab (USB Keyboard Mode ONL Y) ...................................................................................................................... 80 (F1) Sufx - T ab (RS232 Mode ONL Y) ....................................... ...

  • Videk 2030 - page 80

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 74 Save Settings Handle T rigger Optimization SXGA - Near Field ............................................................................................................ 82 (D3) Handle T rigger Optimization VGA - Near Field ............................... ...

  • Videk 2030 - page 81

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 75 Save Settings Code 39 On - Default ..................................................................................................................................................... 84 (C4) Code 39 Off .................................................. ...

  • Videk 2030 - page 82

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 76 Save Settings Postal Codes - Postnet: Strip Check Character - Default .............................................................................................. 86 (D3) Postal Codes - Postnet: Do NOT Strip Check Character ............................. ...

  • Videk 2030 - page 83

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 77 Save Settings Beep - Off ...................................................................................................................................................................... 89 (D1) Beep - Low ............................................ ...

  • Videk 2030 - page 84

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 78 Save Settings US English - Ctrl + Char ................................................................................................................................................. 91 (A1) Alt + Keypad Numbers ......................................... ...

  • Videk 2030 - page 85

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 79 Save Settings RS232 Interface Even Parity RS232 Interface No Parity - Default RS232 Interface Odd Parity VS 2030 Programming Codes Batch Send & Buffer Mode - Default Batch - Delete Scanned Data from Memory Batch - Enable Auto T ransfer Buffer Memory B ...

  • Videk 2030 - page 86

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 80 Save Settings VS 2030 Programming Codes RS232 Interface 4800 Baud Rate RS232 Interface 9600 Baud Rate RS232 Interface 19200 Baud Rate RS232 Interface 38400 Baud Rate RS232 Interface 57600 Baud Rate - Default RS232 Interface 1 15200 Baud Rate RS232 Interfa ...

  • Videk 2030 - page 87

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 81 Save Settings Left T rigger - T ake Picture VS 2030 Programming Codes Global T rigger Optimization SXGA - Both Fields Global T rigger Optimization VGA - Both Fields Global T rigger Optimization DOT - Both Fields Global T rigger Optimization SXGA - Near Fi ...

  • Videk 2030 - page 88

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 82 Save Settings VS 2030 Programming Codes Right T rigger - Read with Both Imagers - Default Right T rigger - Read with Far Field Imager Only Right T rigger - Read with Near Field Imager Only Right T rigger Optimization DOT - Both Fields Right T rigger Optim ...

  • Videk 2030 - page 89

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 83 Save Settings Continuous Scan - Both Imagers Continuous Scan - Near Field Imager Only Continuous Scan - Off Default Continous Scan Time Out Cabled - 2 hours Default Continous Scan Time Out Cabled - Always Continous Scan Time Out Uncabled - 5 minutes - Def ...

  • Videk 2030 - page 90

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 84 Save Settings VS 2030 Programming Codes Aztec On Aztec Off - Default Codabar On - Default Codabar Off Codablock F On Codablock F Off - Default Code 1 1 Off Code 1 1 On - Default Code 1 1 - Checksum 1 digit Code 1 1 - Checksum 2 digit & Strip from Resu ...

  • Videk 2030 - page 91

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 85 Save Settings Code 128 Short Margin On Code 128 Short Margin Off - Default Composite On - Default MSI Plessy On MSI Plessy Off - Default I 2 of 5 4 Digits Off - Default I 2 of 5 2 Digits Off - Default I 2 of 5 4 Digits On I 2 of 5 Off I 2 of 5 2 Digits On ...

  • Videk 2030 - page 92

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 86 Save Settings VS 2030 Programming Codes Maxicode Off - Default Maxicode On Micro PDF417 On Micro PDF417 Off - Default PDF 417 On - Default PDF 417 Off Macro PDF 417 On Macro PDF 417 Off - Default NEC 2 of 5 On NEC 2 of 5 Off - Default Postal Codes Postnet ...

  • Videk 2030 - page 93

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 87 Save Settings VS 2030 Programming Codes Intentionally Blank Postnet Strip Check Character - Default Postnet Do Not Strip Check Character UK ID T ag On - Default UK ID T ag Off Intentionally Blank ...

  • Videk 2030 - page 94

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 88 Save Settings RSS 14 Stacked On RSS Expanded On All RSS On All RSS Off - Default UPC On - Default UPC Off UPC Short Margin Enabled UPC Short Margin Disabled - Default T elepen - Off T elepen - On - Default VS 2030 Programming Codes QR Code On QR Code Off ...

  • Videk 2030 - page 95

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 89 Save Settings VS 2030 Programming Codes Readability Index Output Enabled - Default Readability Index Output Disabled Beep - Low Beep - High - Default Vibrate Off Beep On - Default Beep - Off Vibrate On Beep On Vibrate On Beep Off Clear All CodeXML Rules B ...

  • Videk 2030 - page 96

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 90 Save Settings Mirroring - On Mirroring - Off - Default Continous Illumination On Continous Illumination Off - Default VS 2030 Programming Codes Laser T argeting - On Default Laser T argeting - Off Laser Brightness - High Default Laser Brightness - Medium ...

  • Videk 2030 - page 97

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 91 Save Settings VS 2030 Programming Codes T argeting Zone T olerances (200) T argeting Zone T olerances (400) T argeting Zone T olerances (1600) Optimize Decode Zone 1-D Only (1024 x 200) Optimize Decode Zone Small 2-D (480 x 480) Optimize Decode Zone Large ...

  • Videk 2030 - page 98

    K1 1020 VisionSensor™ 2030 User Manual, Rev . E, Software ver. 3.1.1000, August 3, 2007 - 92 Save Settings VS 2030 Programming Codes Lockout Link Mode Unlock Link Mode Reader Settings Unlocked Reader Settings Locked Bootloader Mode Save Settings Reader ID and Firmware V ersion Clear All Stored Data Reader T ext Commands Off - Default Reader T ext ...

Manufacturer Videk Category Stud Sensor

Documents that we receive from a manufacturer of a Videk 2030 can be divided into several groups. They are, among others:
- Videk technical drawings
- 2030 manuals
- Videk product data sheets
- information booklets
- or energy labels Videk 2030
All of them are important, but the most important information from the point of view of use of the device are in the user manual Videk 2030.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Videk 2030, service manual, brief instructions and user manuals Videk 2030. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Videk 2030.

Similar manuals

A complete manual for the device Videk 2030, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Videk 2030 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Videk 2030.

A complete Videk manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Videk 2030 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Videk 2030, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Videk 2030, that we can find in the current document
3. Tips how to use the basic functions of the device Videk 2030 - which should help us in our first steps of using Videk 2030
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Videk 2030
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Videk 2030 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Videk 2030?

Use the form below

If you did not solve your problem by using a manual Videk 2030, ask a question using the form below. If a user had a similar problem with Videk 2030 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)