English dropdown-ico

Manual White Rodgers 1F97W-51

40 pages 0.14 mb
Download

Go to site of 40

Summary
  • White Rodgers 1F97W-51 - page 1

    OPERA TION GUIDE 7-Day Programmable Electronic Digital Thermostat 1F97W -51 WHITE-RODGERS Operator: Save this booklet for future use! ...

  • White Rodgers 1F97W-51 - page 2

    2 About Y our New Thermostat . . . Your new White-Rodgers Digital Thermostat uses the technology of a solid-state microcomputer to provide precise time/temperature control. This thermostat offers you the flexibility to design heating and cooling programs that fit your needs. Please read this manual thoroughly before operating or programming your th ...

  • White Rodgers 1F97W-51 - page 3

    3 Operator: Save this booklet for future use! ENTERING YOUR PROGRAM Set Current Time and Day Select Heating and Cooling Temperatures Program Heating/Cooling Times and Heating Temperatures Program Cooling Temperatures Using the HOLD/COPY Button CHECK YOUR PROGRAMMING QUESTIONS AND ANSWERS ................ 31 YOUR NEW THERMOSTAT’S FEATURES ........ ...

  • White Rodgers 1F97W-51 - page 4

    4 • Seven independent day programming • Simultaneous heat and cool program storage • Four separate time/temperature settings per 24-hour period • Computed Energy Management Recovery (EMR) • Armchair programming capability • Backlit LCD displays continuous set point, time, and room temperature • 1.5 volt “AA” Energizer ® alkaline ...

  • White Rodgers 1F97W-51 - page 5

    5 OPERA TING YOUR THERMOST A T Before you begin programming your thermo- stat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. The in- formation in this section will help you become familiar with your new thermostat so that you can easily program it. Your thermostat consists of ...

  • White Rodgers 1F97W-51 - page 6

    6 PARTS OF THE THERMOSTAT The Back of The Thermostat Body Turn the thermostat body over. On the back are the 3 “AA” Energizer ® alkaline batteries. The “AA” Energizer ® alkaline batteries provide power to the thermostat when the 24 VAC power is interrupted (for example, when you remove the thermostat from the wall for programming). Fresh ...

  • White Rodgers 1F97W-51 - page 7

    7 Use SYSTEM HEAT - OFF - COOL to turn thermostat OFF be- fore removing thermostat from the wall to replace the batteries. Other than and , the buttons are located behind the thermostat door. To open the door, use your fingernail in the indentation at the top of the door to pull it out from the top, then swing it down on its hinges. On the followin ...

  • White Rodgers 1F97W-51 - page 8

    8 The Display 1 Continuously displays system mode ( HEAT , OFF , COOL , HOLD ). During programming, the day of the week is displayed ( MON , TUE , WED , etc.). 2 Alternately displays room temperature ( F denotes degrees Fahrenheit and C denotes degrees Celsius) and time of day ( A de- notes AM time and P denotes PM time). 3 Displays the setpoint te ...

  • White Rodgers 1F97W-51 - page 9

    9 1 2 3 4 6 6 A B 2 3 5 4 FAN AUTO FAN ON BATTERY FAN AUTO VIEW PRGM RUN PRGM FAN ON - AUTO HOLD COPY VIEW TEMP SET CLOCK ADV DAY SYSTEM HEAT - OFF - COOL TIME FWD TIME BACK ...

  • White Rodgers 1F97W-51 - page 10

    10 The Thermostat Buttons 7 Sets the system mode ( HEAT ing, OFF , or COOL ing). 8 Selects fan operation (see #6, above). This button is also used to program the fan to run continuously during a program period. 9 Runs display forward or backward through time, day, or anticipation settings during programming. 10 Used with TIME FWD and TIME BACK to s ...

  • White Rodgers 1F97W-51 - page 11

    11 10 11 12 13 14 15 16 17 18 9 7 8 FAN AUTO VIEW PRGM RUN PRGM FAN ON - AUTO HOLD COPY VIEW TEMP SET CLOCK ADV DAY SYSTEM HEAT - OFF - COOL TIME FWD TIME BACK 17 (Blue arrow) Lowers temperature setting (40 ° F or 4 ° C minimum). 18 The red indicator light glows whenever heat- ing, cooling, or fan are in operation. ...

  • White Rodgers 1F97W-51 - page 12

    12 OPERATING FEATURES Now that you are familiar with the thermostat display and buttons, read the following informa- tion to learn about the many features of the thermostat. • COMPUTED ENERGY MANAGEMENT RECOVERY (EMR) — The thermostat’s microcomputer can be set to automatically calculate the time it will take to change the temperature to the ...

  • White Rodgers 1F97W-51 - page 13

    13 CAUTION ! • HOLD TEMPERATURE — The thermostat can hold any temperature within its range for an indefinite period, without reverting to the program. Press HOLD COPY . HOLD will be displayed. Then choose the desired hold temperature by pressing or . The thermostat will hold the room temperature at the selected setting until you press RUN PRGM ...

  • White Rodgers 1F97W-51 - page 14

    14 Whenever adjusting anticipation, increase or decrease the displayed number by only one or two digits, then let the system run for a while to see if the adjustment is sufficient. If the heat cycles are too short, press TIME FWD to increase the cycle time. If the heat cycles are too long, press TIME BACK to decrease the cycle time. To set cooling ...

  • White Rodgers 1F97W-51 - page 15

    15 The word BATTERY will be displayed con- tinuously (non-flashing) when 24 VAC power is not being supplied to the thermostat and the thermostat is operating on battery power only. • AUDIO PROMPTING — Each time you press a button, the thermostat will beep. • BACKLIT DISPLAY — When you press any button on the thermostat, the display is lit f ...

  • White Rodgers 1F97W-51 - page 16

    16 Now you are ready to program your thermostat. This section will help you plan your thermostat’s program to meet your needs. For maximum comfort and efficiency, keep the following guidelines in mind when planning your program. • When heating (cooling) your building, pro- gram the temperatures to be cooler (warmer) when the building is vacant ...

  • White Rodgers 1F97W-51 - page 17

    17 3a. What time do the building occupants reach a minimum activity level (limited personnel in building)? b. What temperature should the building be at this time? These will be your Period 3 temperature settings. 4a. What time does the building become vacant? b. What temperature should the building be at this time? These will be your Period 4 temp ...

  • White Rodgers 1F97W-51 - page 18

    18 However, you may use the same heating and cooling temperatures for consecutive time periods. Also keep in mind that, for any given day, you can only program one set of times for both heating and cooling (for ex- ample, if you select 5:00 AM to begin heat- ing period 1 on Monday, then your cooling period 1 for Monday will also begin at 5:00 AM). ...

  • White Rodgers 1F97W-51 - page 19

    19 Temperature Designation Factory Preprogrammed Temperature Your Selected Temperatures* HEAT A HEAT B HEAT C HEAT D 70 70 70 64 COOL A COOL B COOL C COOL D 78 82 78 78 * You may only program heating temperatures you have selected into the heating program and cooling temperatures into the cooling program (for example, you cannot program the COOL A ...

  • White Rodgers 1F97W-51 - page 20

    20 Period 1 Period 2 Period 3 Period 4 Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Monday Tuesday Wednesday Thursday Friday Saturday Sunday Heating/Cooling Schedule Plan THIS THERMOSTAT ALLOWS ONE SET OF TIMES FOR BOTH HEATING AND COOLING ...

  • White Rodgers 1F97W-51 - page 21

    21 Period 1 Period 2 Period 3 Period 4 Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Monday Tuesday Wednesday Thursday Friday Saturday Sunday SAMPLE Heating/Cooling Schedule Plan THIS THERMOSTAT ALLOWS ONE SET OF TIMES FOR BOTH HEATING AND COOLING Joe's Restaurant Closed Mondays Ope ...

  • White Rodgers 1F97W-51 - page 22

    22 ENTERING YOUR PROGRAM Follow these steps to enter the heating/cooling program you have selected. We recommend that you remove the thermostat from the wall for programming (especially for entering cooling programming). Fresh “AA” Ener- gizer ® alkaline batteries must be installed to per- form off-wall programming. BE SURE SYSTEM SWITCH IS SE ...

  • White Rodgers 1F97W-51 - page 23

    23 7. Press RUN PRGM once. The display will show the correct time and room temperature alter- nately. Select Heating and Cooling Temperatures During programming, if you don’t press any buttons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant temperature. The display will revert to the alter- nating time/temperat ...

  • White Rodgers 1F97W-51 - page 24

    24 (if you only want to program temperatures for HEAT A and HEAT B , skip to step 7). 6. Repeat steps 4 and 5 to select HEAT C and HEAT D temperature settings, if desired. 7. Press RUN PRGM . 8. Press SYSTEM HEAT - OFF - COOL until COOL is displayed. 9. Press VIEW TEMP once. The display will show COOL and A , representing the first pro- grammed coo ...

  • White Rodgers 1F97W-51 - page 25

    25 HEAT A , B , C , or D temperature for heating/ cooling period 1. EXAMPLE: 3. To change the displayed start time to your selected start time for Monday’s period 1, press TIME FWD or TIME BACK until your selected time appears. The time will change in 15-minute increments. The time that you program will be the start time of Monday’s period 1 fo ...

  • White Rodgers 1F97W-51 - page 26

    26 The thermostat has a built-in COPY feature. This feature automatically copies the heating and cooling programs you select for Monday into Tuesday’s through Sunday’s programs. If you want to have the same programming every day, after you program Monday’s schedule, you simply press RUN PRGM to start the thermostat’s programmed operation. E ...

  • White Rodgers 1F97W-51 - page 27

    27 Program Cooling Temperatures If outside temperature is below 50 ° F, we recommend that you remove the ther- mostat from the wall before proceeding with the following steps to program cool- ing temperatures. Personal injury and/or property damage could result from air conditioner compressor slugging. Fresh “AA” alkaline batteries (such as En ...

  • White Rodgers 1F97W-51 - page 28

    28 run continuously during this period, press FAN ON - AUTO until PRG FAN is displayed. 5. Repeat step 4 for Monday’s heating cooling periods 3 and 4. 6. Use the HOLD COPY button, or press ADV DAY to choose other days to program. Remember, once you enter Monday’s program, Monday’s pro- gram is automatically copied into Tuesday’s through Sun ...

  • White Rodgers 1F97W-51 - page 29

    29 2. Press ADV DAY until the day you want to copy from is displayed. If you have not com- pleted programming for this day, do so before proceeding. 3. Press HOLD COPY once. COPY will appear on the display. A number from 1 to 7 will also be displayed, representing the day you have selected to copy from (Monday is 1, Tues- day is 2, etc.). For examp ...

  • White Rodgers 1F97W-51 - page 30

    30 3. Press ADV DAY once to advance to Tuesday. 4. Press and hold VIEW PRGM to view heating/cooling periods and heating temperatures for Tues- day. 5. Repeat steps 3 and 4 to review all remaining days’ programming. If you find an error in any day’s programming, go back to the program- ming instructions to correct the error. 6. Press RUN PRGM . ...

  • White Rodgers 1F97W-51 - page 31

    31 1. How can I permanently change a part of my program? Press VIEW PRGM and ADV DAY until you reach the time/temperature schedule you want. Then press TIME FWD or TIME BACK and or to change the program. See PROGRAMMING YOUR THERMOSTAT . 2. How can I have no change in tempera- ture from one time period to another? Simply select the same temperature ...

  • White Rodgers 1F97W-51 - page 32

    32 press RUN PRGM to start the normal program function. See PROGRAMMING YOUR THERMOSTAT . 4. What happens if the electricity goes off or is manually shut off? If you have not installed 3 “AA” alkaline batteries, the display will go blank and the program will be lost in approximately one minute. When electricity is restored, the clock will reset ...

  • White Rodgers 1F97W-51 - page 33

    33 and the display is blank or frozen, static discharge is probably the cause. During periods of low humidity (especially during cold weather), you may feel or see a spark discharge when you touch the ther- mostat. This may cause the program to be lost or the thermostat to display incorrectly. To correct this, remove the thermostat from the wall an ...

  • White Rodgers 1F97W-51 - page 34

    34 8. The thermostat beeps every few min- utes. What does this mean? The thermostat will beep every five minutes when the batteries are low and need replac- ing. To override the beeping, press any button on the keypad. The beeping will stop for 15 hours, then start again. You may again stop the beeping by pressing any button on the keypad. After tu ...

  • White Rodgers 1F97W-51 - page 35

    35 If the outside temperature is below 50 ° F, DO NOT use the button to move the temperature below the setpoint tempera- ture. Property damage may result due to compressor slugging. 11. Why doesn’t the temperature change at the time I programmed? There may be a number of causes for this situation. The following are primary reasons. • The EMR f ...

  • White Rodgers 1F97W-51 - page 36

    36 12. Why does the blower fan keep running after the system has turned off? • You have programmed the fan to run continuously during this period. See PRO- GRAMMING YOUR THERMOSTAT . • The blower delay feature is operating. This energy saving feature continues to blow conditioned air through the ducts after the system has turned off, rather tha ...

  • White Rodgers 1F97W-51 - page 37

    37 15. I live in an area where daylight savings time is observed. How do I change the thermostat clock twice a year without affecting thermostat programming? To change your clock, follow the instruc- tions for setting current time and day. See ENTERING YOUR PROGRAM . Thermo- stat programming is not affected when you change the clock. 16. Do I have ...

  • White Rodgers 1F97W-51 - page 38

    38 NOTES ...

  • White Rodgers 1F97W-51 - page 39

    39 NOTES ...

  • White Rodgers 1F97W-51 - page 40

    Part No. 37-5094B Replaces 37-5094A 9531 If you need further information on programming or operation, write to: White-Rodgers Division, Emerson Electric Co. 9797 Reavis Road St. Louis, MO 63123-5398 Attn: Technical Service Department R ...

Manufacturer White Rodgers Category Thermostat

Documents that we receive from a manufacturer of a White Rodgers 1F97W-51 can be divided into several groups. They are, among others:
- White Rodgers technical drawings
- 1F97W-51 manuals
- White Rodgers product data sheets
- information booklets
- or energy labels White Rodgers 1F97W-51
All of them are important, but the most important information from the point of view of use of the device are in the user manual White Rodgers 1F97W-51.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals White Rodgers 1F97W-51, service manual, brief instructions and user manuals White Rodgers 1F97W-51. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product White Rodgers 1F97W-51.

Similar manuals

A complete manual for the device White Rodgers 1F97W-51, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use White Rodgers 1F97W-51 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of White Rodgers 1F97W-51.

A complete White Rodgers manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual White Rodgers 1F97W-51 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the White Rodgers 1F97W-51, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the White Rodgers 1F97W-51, that we can find in the current document
3. Tips how to use the basic functions of the device White Rodgers 1F97W-51 - which should help us in our first steps of using White Rodgers 1F97W-51
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with White Rodgers 1F97W-51
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of White Rodgers 1F97W-51 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning White Rodgers 1F97W-51?

Use the form below

If you did not solve your problem by using a manual White Rodgers 1F97W-51, ask a question using the form below. If a user had a similar problem with White Rodgers 1F97W-51 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)