English dropdown-ico

Manual Newcon Optik DN-140

8 pages 0.28 mb
Download

Go to site of 8

Summary
  • Newcon Optik DN-140 - page 1

    11. ACCEPTANCE CERTIFICATE NIGHT VISION DEVICE Serial Number _______________________________ Model DN-140 corresponds to technical conditions ADSH 3.807.020 TU and is admitted for use. Date of production -____________________ Place for seal Quality inspector ____________________ (signature) 16 OPERATION MANUAL NIGHT VISION RIFLE SCOPE DN-140M (Came ...

  • Newcon Optik DN-140 - page 2

    DISCLAIM ER The use of this device might be restricted or forbidden in y our area. Check with local author ity . Newcon Optik will not accept any responsibility for improper usage of this scope. CONTENTS 1- I mportant Information 2- Overview i) Application and Advantages of DN-140 ii) Warning iii) Precautions 3- Components 4- Specifications 5- Cons ...

  • Newcon Optik DN-140 - page 3

    The image should be restored in within 2 minutes. Poor atmospheric conditions such as fog, haze or extremely dark environments, will decre ase the visibility distance of the unit. 9. WARRANTY: NEWCON OPTIK warrants this product against defects in material and work m anship for one year from the date of the original date of consum er' s purchas ...

  • Newcon Optik DN-140 - page 4

    • NEVER aim active unit at intense light source s (i.e. lights, headlamps, campfires, the moon, etc.)3 • NEVER reverse the polarity of a battery • NEVER connect the unit to external power sources • ALWAYS remove batteries when not in use for a long period • ALWAYS keep the objective lenses covered when not in use • ALWAYS store in a war ...

  • Newcon Optik DN-140 - page 5

    7. Nex t, focus the scope by turning the focus ring on the sight’s ring. You may have to re-focus both lenses to achieve sharp focus. NOTE: For best result, use a 50mm lens. Wide angle and/or zoom lenses ty pically cannot provide a full-screen image through the DN-200 unit. Camera lens aperture setting lower (wider) than f2.0 may result in lower ...

  • Newcon Optik DN-140 - page 6

    Warning! After transportation or keepi ng the device at temperature lower than -40 ° C (-40 ° F), the device must be warmed up to ambient temp erature, from -10 ° C (14 ° F) to +40 ° C (104 ° F), relative humidity of 80% max. at 20 ° C (68 ° F). Precautions DN-140 is a sophisticated precision optical instrument equipped with electronics. Th ...

  • Newcon Optik DN-140 - page 7

    6. OPERATION INSTRUCTIONS WARNING! NEVER DIRECT T HE LENS IN THE DIRECT ION OF BRIG HT LIGHT! 6.1 Pre-starting procedures. 1. Unpack the device. I n order to install the batteries, open battery house cover (4), and install the batteries. Check the functioning of the device by switching it on (click switch 10) and looking through ey e-piece (2). If ...

  • Newcon Optik DN-140 - page 8

    4. SPECIF ICATION S OF DN -140 I mage intensifier Gen. 1 Resolution ln/mm 32ln/mm Magnification, X 2.8 Field of View, angl.., degrees, not less 12 ° L ens 85mm, F/2 Dioptric correction +3, -4 Focus Range, m 0.6- ∞ Ey epiece focal length 15mm Ey epiece relief distance 45mm Power supply 3V, 2AA Battery life, hours 30 (at 20 ° C) Dimensions, mm 6. ...

Manufacturer Newcon Optik Category Binoculars

Documents that we receive from a manufacturer of a Newcon Optik DN-140 can be divided into several groups. They are, among others:
- Newcon Optik technical drawings
- DN-140 manuals
- Newcon Optik product data sheets
- information booklets
- or energy labels Newcon Optik DN-140
All of them are important, but the most important information from the point of view of use of the device are in the user manual Newcon Optik DN-140.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Newcon Optik DN-140, service manual, brief instructions and user manuals Newcon Optik DN-140. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Newcon Optik DN-140.

Similar manuals

A complete manual for the device Newcon Optik DN-140, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Newcon Optik DN-140 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Newcon Optik DN-140.

A complete Newcon Optik manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Newcon Optik DN-140 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Newcon Optik DN-140, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Newcon Optik DN-140, that we can find in the current document
3. Tips how to use the basic functions of the device Newcon Optik DN-140 - which should help us in our first steps of using Newcon Optik DN-140
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Newcon Optik DN-140
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Newcon Optik DN-140 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Newcon Optik DN-140?

Use the form below

If you did not solve your problem by using a manual Newcon Optik DN-140, ask a question using the form below. If a user had a similar problem with Newcon Optik DN-140 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)