English dropdown-ico

Manual Harbor Freight Tools 98733

16 pages 0.72 mb
Download

Go to site of 16

Summary
  • Harbor Freight Tools 98733 - page 1

    21° ANGLE FRAMING NAILER 98733 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork containe ...

  • Harbor Freight Tools 98733 - page 2

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if produc ...

  • Harbor Freight Tools 98733 - page 3

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 3 Keep bystanders, children, and c. visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. Personal safety Stay alert. Watch what you are do- a. ing and use common sense when operating the tool. Do not use the tool while tired or ...

  • Harbor Freight Tools 98733 - page 4

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 4 Fire nails into an appropriate work e. surface only . Do not attempt to re nails into surfaces too hard to pen- etrate. Do not drive nails on top of other nails, or at too steep an angle. Nails can ricochet, causing personal injury . Never re this tool into the air or point ...

  • Harbor Freight Tools 98733 - page 5

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 5 pressure or within the rated pressure range as marked on the tool ( 70 to 120 PSI ). Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. Never use oxygen, carbon dioxide, b. combustible gase ...

  • Harbor Freight Tools 98733 - page 6

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 6 those dust masks that are specially designed to lter out microscopic particles. (California Health & Safety Code § 25249.5, et seq. ) T ake caution, as some woods contain 3. preservatives such as copper chro- mium arsenate (CCA) which can be toxic. When nailing these mate ...

  • Harbor Freight Tools 98733 - page 7

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 7 FUNCTIONAL DESCRIPTION Specications Working Air Pressure Range 70-120 PSI * (Depending on nail length and wood density) Air Inlet 1/4” -18 NPT Nail T ype .1 13”-.131” diameter , 2-3/16” to 3-1/2” L, 21° Nails Fastener T ype Plastic Collated Full Head Nails Magazine ...

  • Harbor Freight Tools 98733 - page 8

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 8 ponents, such as a connector and quick coupler , will make operation more efcient, but are not required. W ARNING! TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow th ...

  • Harbor Freight Tools 98733 - page 9

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 9 OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problem ...

  • Harbor Freight Tools 98733 - page 10

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 10 to perform in the manner explained in bold, have it repaired by a quali- ed service technician. W ARNING! Disconnect the Nailer from the air compressor when- ever loading or servicing. AL W A YS WEAR ANSI- APPROVED IMP ACT SAFETY GOGGLES WHEN RELOADING OR DOING ANY OTHER MAIN ...

  • Harbor Freight Tools 98733 - page 11

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 1 1 Clearing Jams W ARNING! Anytime any maintenance or repairs are done (including clearing jams), wear ANSI-approved impact safety goggles and appro- priate hearing protection. THEN: Disconnect the Framing Nailer 1. from its air supply . Empty the Magazine (71) complete - 2. ly . ...

  • Harbor Freight Tools 98733 - page 12

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 12 USER-MAINTENANCE INSTRUCTIONS Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: Always disconnect Nailer from its compressed air supply and safely discharge any residua ...

  • Harbor Freight Tools 98733 - page 13

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 13 T roubleshooting Problem Possible Causes Likely Solutions Air leaking in Cylinder Cap (8A). Loose Screw (6). 1. O-ring (9A) is cracked or worn. 2. T ighten and recheck. 1. Replace O-ring. 2. Lack of power . Slow to cycle. Low power when shooting and returning. T ool is too dry . ...

  • Harbor Freight Tools 98733 - page 14

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 14 Part Description 1 Screw 2 Spring W asher 3 Bushing 4 Exhaust Cover 5 Seal 6 Screw 7 Spring W asher 8A Cylinder Cap 9A O-ring sealing 10 W asher 11 V alve Seat 12 Spring 13 O-Ring (M57.5 x 3.6) 14 O-Ring (M72.4 x 3.5) 15 V alve 16 Screw 17 Cylinder Seal 18 Collar 19 O-Ring (M54. ...

  • Harbor Freight Tools 98733 - page 15

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 15 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts. REV 09g ...

  • Harbor Freight Tools 98733 - page 16

    SKU 98733 For technical questions, please call 1-800-444-3353. Page 16 LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year fr ...

Manufacturer Harbor Freight Tools Category Nail Gun

Documents that we receive from a manufacturer of a Harbor Freight Tools 98733 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 98733 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 98733
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 98733.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 98733, service manual, brief instructions and user manuals Harbor Freight Tools 98733. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 98733.

Similar manuals

A complete manual for the device Harbor Freight Tools 98733, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 98733 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 98733.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 98733 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 98733, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 98733, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 98733 - which should help us in our first steps of using Harbor Freight Tools 98733
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 98733
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 98733 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 98733?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 98733, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 98733 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)