English dropdown-ico

Manual NEC MT1060

70 pages 2.92 mb
Download

Go to site of 70

Summary
  • NEC MT1060 - page 1

    LCD Projector MT 1 065/MT1060 User’ s Manual ...

  • NEC MT1060 - page 2

    LIMITED W ARRANTY Except as specified below , the warranty that ma y be provided by the dealer cov ers all defects in material or workmanship in this product. The follo wing are not covered b y the warranty: 1. Any product on which the serial number has been def aced, modified or remov ed. 2. Damage, deterioration or malfunction resulting from; a. ...

  • NEC MT1060 - page 3

    NEC SOLUTIONS’ PROJECTOR PRODUCTS NEC Solutions (America), Inc. (hereafter NEC Solutions) warrants this product to be free from defects in material and workmanship under the following terms. HOW LONG IS THE W ARRANTY NEC Solutions’ MT1065, MT1060, and MT1060R projectors are covered by a two (2) year limited parts and labor war- ranty from the d ...

  • NEC MT1060 - page 4

    DECLARA TION OF CONFORMITY U.S. Responsible Party: Address: Tel. No.: NEC Solutions (America), Inc. 1250 N. Arlington Heights Road Itasca, Illinois 60143 (630) 467-5000 Type of Product: Equipment Classification: Models: LCD Projector Class B Peripheral MT1065, MT1060 and MT1060R W e her eby declar e that the equipment specified abo ve conforms to t ...

  • NEC MT1060 - page 5

    Portable Projector MT1065/MT1060 User ’ s Manual English Deutsch Français Italiano Español Svenska ...

  • NEC MT1060 - page 6

    E-2 Safety Cautions Precautions Please read this manual carefully bef ore using your NEC MT1065/ MT1060 Projector and keep the man ual handy for future reference . Y our serial number is located on the right side of your projector . Record it here: CA UTION T o turn off main power , be sure to remove the plug from po wer outlet. The power outlet so ...

  • NEC MT1060 - page 7

    E-3 Fire and Shock Pr ecautions 1. Ensure that there is sufficient v entilation and that vents are unob- structed to prev ent the build-up of heat inside your projector . Allow at least 3 inches (10 cm) of space between your projector and a wall. 2. Prev ent foreign objects such as paper clips and bits of paper from falling into y our projector. Do ...

  • NEC MT1060 - page 8

    E-4 T ABLE OF CONTENTS Important Information ..................................................... E-2 Safety Cautions ............................................................................................................... E -2 What's in the Box? .......................................................................................... ...

  • NEC MT1060 - page 9

    E-5 INTRODUCTION Introduction to the Pr ojector This section introduces you to y our new MT1065/MT1060 Projector and describes the features and controls. Congratulations on Y our Purchase of The MT1065/ MT1060 Projector The MT1065/MT1060 is one of the v er y best projectors availab le today . The MT1065/MT1060 enables y ou to project precise images ...

  • NEC MT1060 - page 10

    E-6 AC IN RG B 2 I N R GB O U T A U D IO A U D IO D V I I N U S B ( MOU S E /H U B ) R EM O TE A U D IO A U D IO G /Y B /C b H V RG B 1 I N S- V I D EO IN VI D EO I N A U D IO A U D IO A U D IO L/MON O R L/MONO R A U D IO O U T L /M ON O R P C C ON T R O L 1 2 Part Names of the Pr ojector V entilation (outlet) Heated air is e xhausted from here * T ...

  • NEC MT1060 - page 11

    E-7 11 10 9 8 4 14 12 13 2 5 6 1 7 3 T op Features 1. POWER Button (ON / ST AND BY)( ) Use this button to turn the power on and off when the main po wer is supplied and the projector is in standb y mode. NOTE: T o tur n on or off the projector , press and hold this button for a mini- mum of two seconds. 2. POWER Indicator When this indicator is gre ...

  • NEC MT1060 - page 12

    E-8 1. RGB1 IN / Component Input Connector (Mini D-Sub 15 Pin) Connect your computer or other analog RGB equipment such as IBM compatible or Macintosh computers . Use the supplied RGB cab le to connect to your computer . This also serves as a component input connector that allows you to connect a component video output of component equipment such a ...

  • NEC MT1060 - page 13

    E-9 Part Names of the Remote Control NOTE: If you are using a Macintosh computer , you can click either the right-click or left-click button to activate the mouse. PJ F R EE Z E 3D REFORM P IC-M UTE E O FF V ID E O A U TO A D J. R GB V IE W ER L A SER ON POW ER SELECT 2 1 3 1. Infrared T ransmitter Direct the remote control tow ard the remote senso ...

  • NEC MT1060 - page 14

    E-10 22. PICTURE MUTE Button This button turns off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: When the menu is displayed, a press of this button mutes an image and sound without turning off the menu. 23. VOLUME (+)(–) Button Press (+) to increase the volume and (–) to decrease it. 24. MAGNI ...

  • NEC MT1060 - page 15

    E-11 Battery Installation 1. Press firmly and slide the batter y cov er off. 2. Remov e both old batteries and install new ones (AA). Ensure that y ou have the batteries' polarity (+/-) aligned correctly . 3. Slip the cov er back over the batteries until it snaps into place. Do not mix diff erent types of batter ies or new and old batteries. N ...

  • NEC MT1060 - page 16

    E-12 3 1 2 INST ALLA TION AND CONNECTIONS This section describes how to set up your projector and ho w to connect video and audio sources. T o the wall outlet. Setting Up the Scr een and the Projector Selecting a Location The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is appro ximately ...

  • NEC MT1060 - page 17

    E-13 NOTE: Distances may vary +/-5%. Reflecting the Image Using a mirror to reflect your projector's image enab les you to enjoy a much larger image. Contact y our NEC dealer if you need a mirror. If you're using a mirror and y our image is inverted, use the MENU and SELECT buttons on y our projector cabinet or  buttons on your re- ...

  • NEC MT1060 - page 18

    E-14 Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector . * If the screen goes blank while using your remote c ...

  • NEC MT1060 - page 19

    E-15 T o connect SCART output (RGB) Before connections: An e xclusive SCART adapter (ADP-SC1) and a commercially av ailable SCART cab le are required for this connection. NOTE: • Audio signal is not available for this connection. • The RGB IN 2 connector does not support Plug & Play . RGB 1 IN Video equipment such as D VD play er Projector ...

  • NEC MT1060 - page 20

    E-16 AUDIO OUT L AUDIO IN LR R Component YC b C r RGB 1 IN RGB 2 IN Connecting Y our DVD Player D VD play er Y ou can connect your projector to a D VD play er with component output or Video output. T o do so, simply: 1. T ur n off the po wer to your projector and D VD play er. 2. If your D VD pla yer has the component video (Y ,Cb,Cr) output, use a ...

  • NEC MT1060 - page 21

    E-17 S-VIDEO IN AUDIO OUT LR AUDIO IN LR VIDEO OUT VIDEO IN S-VIDEO OUT VCR/ Laser disc pla yer Connecting Y our VCR or Laser Disc Player Audio equipment S-video cable (not supplied) Video cable (not supplied) Audio cab le (not supplied) Use common RCA cab les (not provided) to connect your VCR, laser disc play er or document camera to your project ...

  • NEC MT1060 - page 22

    E-18 PROJECTING AN IMAGE (BASIC OPERA TION) This section describes how to turn on the projector and to project a picture onto the screen. T ur ning on the Projector NOTE: • When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off[O] position. Failure to do so may cause damage to the projec ...

  • NEC MT1060 - page 23

    E-19 Selecting a Sour ce Selecting the computer or video source Using the Remote Control ASPECT OFF VIDEO AUTO ADJ. RGB VIEWER LASER ON 3D REFORM HELP POINTER VOLUME MAGNIFY ZOOM PIC-MUTE SLIDE FOLDER SLIDE LIST POWER FREEZE FOCUS Press any one of the RGB, VIDEO or VIEWER buttons . Source List NOTE: If no input signal is available, the projector wi ...

  • NEC MT1060 - page 24

    E-20 Focus Use the FOCUS Button (+/-) to obtain the best f ocus. Correcting the Horizontal and V ertical Key- stone Distortion (3D Reform) Use the 3D Reform feature to correct k eystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shor ter so that the projected image is rectangular . In the f ...

  • NEC MT1060 - page 25

    E-21 5. Press the ENTER button. 6. Use the SELECT  button to mo ve the projected image frame as shown on the e xample. 7. Press the ENTER button. Screen The confirmation screen is displayed. On the Cornerstone adjustment screen, select “Exit” and then “OK”, or press the CANCEL but- ton on the remote control. 8. Use the SELECT ? ...

  • NEC MT1060 - page 26

    E-22 Optimizing RGB Picture Automatically Adjusting the Image Using Auto Adjust Optimizing RGB image automatically Press the A uto Adjust button to optimize an RGB image automatically . [P oor picture] [Normal picture] AUTO ADJ. Press the A uto Adjust button to fine-tune the computer image or to re- mov e any vertical banding that might appear and ...

  • NEC MT1060 - page 27

    E-23 Setting the function switch There are two s witches on the bottom of the batter y case: an applicable projector selector s witch (1) and laser enable/disable s witch (2). Chec k the projector being used and decide whether to enable or disab le laser, then set these s witches as necessar y using the tip of a thin ball-point pen. On this model, ...

  • NEC MT1060 - page 28

    E-24 ASPECT OFF VIDEO AUTO ADJ. RGB VIEWER LASER ON 3D REFOR M HELP POINTER VOLUME MAGNIFY ZOOM PIC-MUTE SLIDE FOLDER SLIDE LIST POWER FREEZE FOCUS ASPECT OFF VIDEO AUTO ADJ. RGB VIEWER LASER ON 3D REFORM HELP POINTER VOLUME MAGNIFY ZOOM PIC-MUTE SLIDE FOLDER SLIDE LIST POWER FREEZE FOCUS CONVENIENT FEA TURES Using the Remote Mouse Function The bui ...

  • NEC MT1060 - page 29

    E-25 T ur ning Off the Image and Sound Press the Picture Mute button to turn off the image and sound for a shor t period of time. Press again to restore the image and sound. PIC-MUTE Freezing a Pictur e Press the F reeze button to freeze a picture . Press again to resume motion. FREEZE Using the Pointer Y ou can use one of eight pointers to draw yo ...

  • NEC MT1060 - page 30

    E-26 Using the USB Mouse Using the supplied USB mouse giv es you a smooth operation. A com- mercially av ailable USB mouse can be also used. NOTE: There may be some brands of USB mouse that the projector does not support. The scroll button on the supplied USB mouse does not work with the projector . Operate the Menus using the USB mouse Mouse Curso ...

  • NEC MT1060 - page 31

    E-27 Changing Backgr ound Logo Y ou can change the default bac kground logo using the PC Card Files f eature. NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available. 1. F rom the menu, select [T ools] → [PC Card Files] to display a list of all the files stored in the PC card so that you can select a file y o ...

  • NEC MT1060 - page 32

    E-28 AC IN RGB2 IN RGB OUT AUDIO AUDIO DVI IN USB ( MOUSE/HUB ) R E MO T E AUDIO AUDIO G/Y B/Cb H V RGB1 IN S -VID E O IN V ID E O IN AUDIO AUDIO AUDIO L/MONO R L/M ONO R AUDIO OUT L/MONO R PC CONTROL 1 2 PC card (not supplied) USING THE VIEWER NOTE: • T o use the Viewer , first you need to create presentation materials on your PC using the Dynam ...

  • NEC MT1060 - page 33

    E-29 Operating the Viewer Function fr om the Projector (playback) This section describes the operation f or showing slides of presentation documents created using the Viewer function with the projector . It is also possible to mak e slides directly from the images projected with the projector . Projecting slides (V iewer) 1. Inser t a PC card into ...

  • NEC MT1060 - page 34

    E-30 NOTE: Y ou can also use the  and  button on the remote control to select folders or slides. If you use the  and  button on the remote control for Viewer operation, press the PJ button to switch to the Projector mode and the PJ button lights red. Lit red W orks as the Select button on the projector . E N T E R C A N C E L SELECT PJ ...

  • NEC MT1060 - page 35

    E-31 Deleting Captured Images Using the Delete button on the tool bar f or Vie wer can delete captured images. T o delete captured images: 1. Select Viewer and display a f older list of captured images. 2. Use button to select the Capture folder [Cap] in the right bottom of the screen. 3. Press the MENU button to displa y the tool bar. 4. Use the ? ...

  • NEC MT1060 - page 36

    E-32 USING ON-SCREEN MENU Basic Menu Operation Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced mo- tion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Basic , Advanced or Custom Menu. NOTE: When using a USB mouse, click the mouse button to display ...

  • NEC MT1060 - page 37

    E-33 Menu tree Brightness, Contrast, Color, Hue, Sharpness 4:3, Letterbox, Wide Screen, Crop / 4:3 Window, Letterbox, Wide Screen, 4:3 Fill Top, Bottom, Left, Right Horizontal, Vertical, Clock, Phase Auto, Native 0%, 5%, 10%, 25% Off, Less, More Off, Low, Medium, High RGB, Component Advanced Menu Source Select Picture Sound Image Options Picture Ma ...

  • NEC MT1060 - page 38

    E-34 Advanced Menu Source Select Picture Sound Image Options Picture Management Projector Options Tools Help Factory Default 3D Reform Wall Color Correction Menu Setup Lamp Setting Screen Auto Functions LAN Mode Password Security Menu Setup Cornerstone Keystone Off, User 1, User 2, User 3, User 4 (Auto Adjust Button) Page 1 Language Menu Mode Proje ...

  • NEC MT1060 - page 39

    E-35 Advanced Menu Source Select Picture Volume Image Options Picture Management Projector Options Tools Help Factory Default 3D Reform Wall Color Correction Menu Setup Lamp Setting Screen Auto Functions LAN Mode Password Security Sleep Timer Capture PC Card Files ChalkBoard Contents Information Menu Logo Security Enable, Disable, Keyword, Use Prot ...

  • NEC MT1060 - page 40

    E-36 Menu windows or dialog bo xes typically ha ve the following elements: Title bar .............. Indicates the menu title. Highlight ............. Indicates the selected menu or item. Solid triangle ...... Indicates fur ther choices are av ailable. A highlighted triangle indicates the item is active. T ab ..................... Indicates a group ...

  • NEC MT1060 - page 41

    E-37 Entering Alphanumeric Characters by Using the Menu Alphabet or numeric characters are used f or your IP address or projec- tor name. T o enter IP Address or projector name, use the software ke y- board. F or using the software keyboard, see page E-60. Menu Descriptions & Functions Source Select Selecting a Source Enables y ou to select a v ...

  • NEC MT1060 - page 42

    E-38 Entry Edit Command Picture (not available for V iewer and LAN) Adjusting Brightness, Contrast, Color , Hue, and Sharpness Brightness ...... Adjusts the brightness lev el or the back raster inten- sity . Contrast ......... Adjusts the intensity of the image according to the incoming signal. Color .............. Increases or decreases the color ...

  • NEC MT1060 - page 43

    E-39 Masking Unwanted Area (Blanking) This feature allo ws you to mask any unwanted area of the screen image. Adjust the T op, Bottom, Left or Right b lanking with the SELECT  or  button. Adjusting P osition and Clock This allows y ou to manually adjust the image horizontally and verti- cally , and adjust Clock and Phase. Horizontal/V ertical ...

  • NEC MT1060 - page 44

    E-40 Selecting Gamma Correction Mode Use the  or  buttons to choose one mode from three options . Each mode is recommended for : Dynamic ......... For true color reproduction of natural tones Natural ........... Nor mal settings Black Detail .... For dark portions of a picture Selecting Color Correction Adjusts red, green, blue , yellow , mag ...

  • NEC MT1060 - page 45

    E-41 Using Adapting Color Correction [W all Color Correction] The correction mode select screen will be displa yed. * T o read the pre-adjustment settings. Choose a selection from User 1 – 4, highlight "OK" and press the ENTER b utton. 3. Use the SELECT  button to highlight "Ex ecute" and then press the ENTER button. The A ...

  • NEC MT1060 - page 46

    E-42 6. Use the SELECT  button to mo ve the y ellow box to select a color density . Moving the yello w box changes the color density of the selected por- tion in the palette. Mov e the yellow bo x so that a color on the white paper for W all Color Correction becomes close to a color of the projected image on the wall. Actual color of th ...

  • NEC MT1060 - page 47

    E-43 Menu Allows y ou to set preferences f or the on-screen menu. Press "OK" to sav e your changes for all the f eatures of P age 1 and Page 2. [P age1] Selecting Menu Language [Language]: Y ou can choose one of seven languages f or on-screen instructions. The options are: English, German, French, Italian, Spanish, Swedish and Japanese . ...

  • NEC MT1060 - page 48

    E-44 Setup Enables you to set operating options . Press "OK" to save y our changes for all the f eatures of Page1, P age2, Page3, P age 4, Page 5 and P age 6. [P age 1] [P age 2] Selecting Projector Orientation [Orientation]: This reorients your image for y our type of projection. The options are: desktop front projection, ceiling rear pr ...

  • NEC MT1060 - page 49

    E-45 [P age 3] Selecting Signal F or mat [Signal Select] RGB1/2: Allows y ou to choose "RGB" for an RGB source such as a computer , or "Component" f or a component video source such as a D VD player . Normally select "RGB/Component" and the projector automatically detects an either incoming signal. Howe ver there may b ...

  • NEC MT1060 - page 50

    E-46 [P age 6] Selecting Communication Speed [Communication Speed]: This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It suppor ts data rates from 4800 to 38400 bps. The def ault is 38400 bps. Select the appropr iate baud rate f or your equipment to be connected (depending on the equipment, a lower baud rate ma y be recommend ...

  • NEC MT1060 - page 51

    E-47 Selecting Auto Functions F ocus: When A uto Focus is enabled in the A uto Functions menu, Auto F o- cus can be ex ecuted by pressing and holding the A UTO ADJUST or A UTO ADJ b utton for a minimum of 2 seconds. Wall Color Correction: When Wall Color Correction is enab led in the Auto Functions menu, W all Color Correction can be executed b y p ...

  • NEC MT1060 - page 52

    E-48 Setting LAN Mode This feature allo ws you to set various setting items when the projector is used on your network. Consult with your network administr ator about these settings. NOTE: • A LAN card is required for LAN connection; NEC's optional wireless LAN card is available. For more information on inserting or ejecting a LAN card, see ...

  • NEC MT1060 - page 53

    E-49 WEP (for Wireless only) Select this option whether using the WEP (Wired Equivalent Privacy) ke y for encryption or not. T o use encryption, specify WEP k ey . Disab le ........... Will not tur n on the encryption feature. Y our commu- nications may be monitored b y someone. 64bit ............... Uses 64-bit datalength f or secure transmission. ...

  • NEC MT1060 - page 54

    E-50 Status Displays the status of the LAN settings . IP Address ..... Indicates the IP address of the projector . Subnet Mask .. Indicates the subnet mask of the projector . MAC Address . Indicates the MAC address of the LAN card. Setting a Passwor d A pass word can be set for your projector to a void operation b y an unau- thorized person. There ...

  • NEC MT1060 - page 55

    E-51 Enable/Disab le .............. This tur ns the Secur ity function on or off . K eyword ........................ Enter an appropriate keyword when y ou use the Security function. (Up to 10 characters can be used.) The Security function is availab le only when your ke yword is entered. Use Protect key ............ Check this box to loc k your pr ...

  • NEC MT1060 - page 56

    E-52 T ools Provides tools f or setting sleep timer , captur ing images, displa ying files or changing y our background logo in a PC Card and dr awing. NOTE: The "Capture" and "PC Card Files" features are required for a PC card. Using Sleep Timer 1. Select your desired time betw een 30 minutes and 16 hours: Off , 0:30, 1:00, 2:0 ...

  • NEC MT1060 - page 57

    E-53 MAINTENANCE This section describes the simple maintenance procedures you should f ollow to replace the lamp and the filter, and to clean the filter , the cabi- net and the lens. Replacing the Lamp After your lamp has been oper ating for 2000 hours (Normal mode on the standard lif e lamp) or longer, the "Lamp" indicator in the cabinet ...

  • NEC MT1060 - page 58

    E-54 1. T ur n off the projector bef ore cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Nev er use strong detergents or solvents such as alcohol or thinner . 3. Use a blow er or lens paper to clean the lens, and be careful not to scratch or mar the lens. Cleaning the Cabinet and the Lens Clea ...

  • NEC MT1060 - page 59

    E-55 TROUBLESHOOTING This section helps you resolv e problems you ma y encounter while setting up or using the projector . Power Indicator Indicator Condition Projector Condition Note Off Blinking light Steady light Green blinking Green blinking Orange blinking 0.5 sec ON, 0.5 sec OFF 2.5 sec ON, 0.5 sec OFF 0.5 sec ON, 0.5 sec OFF The main power i ...

  • NEC MT1060 - page 60

    E-56 Does not turn on No picture Image isn’t square to the screen Picture is blurred Image is scrolling verti- cally , horizontally or both Remote control does not work Indicator is lit or blink- ing Cross color in RGB mode USB mouse does not work • Check that the power cable is plugged in and that the power button on the projector cabinet or t ...

  • NEC MT1060 - page 61

    E-57 SPECIFICA TIONS This section provides technical inf or mation about the MT1065/MT1060 Projector's performance Model Number MT1065/MT1060 Optical LCD P anel MT1065: 1.0" p-Si TFT activ e-matr ix with Micro Lens Arra y MT1060: 1.0" p-Si TFT activ e-matr ix Resolution 1024 ⳯ 768 pixels up to UXGA with Adv anced AccuBlend Lens Mot ...

  • NEC MT1060 - page 62

    E-58 APPENDIX Cabinet Dimensions Unit = mm (inch) Mini D-Sub 15 Pin Connector Pin Assignments of D-Sub RGB Input Connector Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green or Sync on Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Ground Y Ground 8 Blue Ground Cb Ground 9 No Connection 10 Sync Signal Ground 11 SCART Sync ...

  • NEC MT1060 - page 63

    E-59 Compatible Input Signal List Signal Resolution F requency H. Refresh Rate ( Dots ) ( kHz ) ( Hz ) NTSC – 15.734 60 P AL – 15.625 50 SECAM – 15.625 50 VESA 640 ⳯ 480 31.47 59.94 IBM 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 34.97 66.67 MAC 640 ⳯ 480 35 66.67 VESA 640 ⳯ 480 37.86 72.81 VESA 640 ⳯ 480 37.5 75 IBM ...

  • NEC MT1060 - page 64

    E-60 15 24 3 67 9 8 Cable Connection Communication Protocol Baud rate ............................. 38400 bps Data length .......................... 8 bits Parity .................................... No parity Stop bit ................................ One bit X on/off ................................ None Communications procedure . Full duplex NOTE ...

  • NEC MT1060 - page 65

    E-61 Operation Using an HTTP Browser Overview The use of HTTP server functions will allow control of the projector from a web browser without the installation of special softw are. Please be sure to use “Microsoft Internet Explorer 4.x” or a higher version f or the web browser . (This device uses “Jav aScr ipt” and “Cookies” and the bro ...

  • NEC MT1060 - page 66

    E-62 T ravelCare Guide T ravelCare - a service for international travelers This product is eligible f or "T rav elCare", NEC's unique inter national war- ranty . Please note that T rav elCare cover age differs in part from coverage un- der the warr anty included with the product. Services offer ed with T ravelCare This warranty allo ...

  • NEC MT1060 - page 67

    E-63 In Asia and Middle East NEC Viewtechnology , Ltd. Address: 686-1, Nishioi, Oi-Machi, Ashigarakami-Gun, Kanagaw a 258-0017, Japan T elephone: +81 465 85 2369 F ax Line: +81 465 85 2393 Email Address: support_pjweb@nevt.nec.co .jp WEB Address: http://www .nec-pj.com (Regions Cov ered) J apan* NEC Hong K ong Ltd. Address: 11th Floor , T ower B , ...

  • NEC MT1060 - page 68

    E-64 T O: NEC or NEC's A uthorized Service Station: FM: (Company & Name with signature) Dear Sir (s), I would lik e to apply your T rav elCare Ser vice Program based on attached registration and qualification sheet and ag ree with your f ollowing conditions, and also the Service fee will be charged to m y credit card account, if I don&apos ...

  • NEC MT1060 - page 69

    E-65 Condition of your T ravelCare Service Program Enduser is requested to understand f ollowing condition of T ra velCare Service Program and fill necessary information into the application sheet. 1. Ser vice Options: There are 3 types of "Service" availab le. Enduser has to understand f ollowing condition and is required to fill in the ...

  • NEC MT1060 - page 70

    Printed in Japan 7N8P1912 ...

Manufacturer NEC Category Projector

Documents that we receive from a manufacturer of a NEC MT1060 can be divided into several groups. They are, among others:
- NEC technical drawings
- MT1060 manuals
- NEC product data sheets
- information booklets
- or energy labels NEC MT1060
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC MT1060.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC MT1060, service manual, brief instructions and user manuals NEC MT1060. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC MT1060.

Similar manuals

A complete manual for the device NEC MT1060, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC MT1060 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC MT1060.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC MT1060 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC MT1060, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC MT1060, that we can find in the current document
3. Tips how to use the basic functions of the device NEC MT1060 - which should help us in our first steps of using NEC MT1060
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC MT1060
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC MT1060 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC MT1060?

Use the form below

If you did not solve your problem by using a manual NEC MT1060, ask a question using the form below. If a user had a similar problem with NEC MT1060 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)