Manual Telex EMS-4001

11 pages 1.05 mb
Download

Go to site of 11

Summary
  • Telex EMS-4001 - page 1

    1 User Instructions 9350-7713-000 Rev . B, 3/2005 Model EMS-4001 Exp ansion Master St ation Audiocom ® Intercom Systems ...

  • Telex EMS-4001 - page 2

    2 FCC S t atement This equipment uses, and can radiate radio frequency energy that may cause interference to radio communications if not installed in accordance with this manual. The equipment has been tested and found to comply with the limits of a Class A computing device pursuant to Subpart J, Part 15 of FCC Rules which are designed to provide r ...

  • Telex EMS-4001 - page 3

    3 T able of Contents Description ................................................................................ 4 Featur es ..................................................................................... 4 Installation ................................................................................. 5 Unpacking ............................. ...

  • Telex EMS-4001 - page 4

    4 Description The EMS-4001 adds four powered intercom channels to an MS-2001 Master Station, and it provides talk, listen and call buttons for the added channels. Up to four EMS-4001 Expansion Master Stations may be connected to the MS- 2001 to add up to 16 channels (18 channels total). The MS-2001 microphone is used to talkback to the EMS-4001 cha ...

  • Telex EMS-4001 - page 5

    5 9. Program Inputs Connector and T rimmers : Each intercom channel has its own program input and level adjust trimmer . For each program input, there is an internal jumper which routes the program either to the intercom channel only , or to both the intercom channel and the MS-2001 headset or speaker (default setting). Additionally , the program s ...

  • Telex EMS-4001 - page 6

    6 W ARNING The following instructions are for use by qualified personnel only . T o avoid electric shock, do not remove the cover unless you are qualified to do so. A VERTISSMENT Les instructions qui suivent s’adressent uniquement a un technicien qualifie. Pour evite des chocs electriques, ne p as ouvrir le boitier , a moins d’y habilite. Confi ...

  • Telex EMS-4001 - page 7

    7 T able 1 - EMS-4001 configuration switch settings. ...

  • Telex EMS-4001 - page 8

    8 Mounting Configurations The EMS-4001 mounts in a standard 19 inch equipment rack and is 1 rack unit high. Install the two supplied rack mount cosmetic covers when installing the EMS-4001 in the rack. When rack mounting components, you may not be able to access the sidetone trimmers after the components have been mounted. In this case, you can pos ...

  • Telex EMS-4001 - page 9

    9 Figure 3 - Example of EMS-4001 in a system. Power-Up Plug in the power cord. The EMS-4001 channels power -up identically to channels one and two of the MS-2001. Refer to the MS-2001 User Instructions for all power-up information. The MS-2001 and EMS-4001 can be powered up in any order . Sidetone Adjustment s Use the sidetone adjustment procedure ...

  • Telex EMS-4001 - page 10

    10 Operation The EMS-4001 channels operate identically to channels one and two of the MS-2001. Refer to the MS-2001 User Instructions for all operating information. S pecifications General Input and Output Power: AC Input: 100-240 V AC, 50/60 Hz Channel Power (each channel): 24 ±1 VDC, 2 A Dimensions: 1.75” (44.5 mm) high, 19” (483 mm) wide, 1 ...

  • Telex EMS-4001 - page 11

    11 Call Signaling: Send: 20 kHz ±100 Hz, 0.5 V rms ±10% Receive: 20 kHz ±800Hz, 100 mV rms Mic-Kill Frequency: Send: 24 kHz ±100 Hz, 0.5 V rms ±10% Receive: 24 kHz ±800 Hz, 100 mV rms Noise Contribution: less than -70 dB Common Mode Rejection Ratio: greater than 50 dB Connector type: One XLR-3M for each channel Balanced Configuration Pinouts ...

Manufacturer Telex Category Intercom System

Documents that we receive from a manufacturer of a Telex EMS-4001 can be divided into several groups. They are, among others:
- Telex technical drawings
- EMS-4001 manuals
- Telex product data sheets
- information booklets
- or energy labels Telex EMS-4001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Telex EMS-4001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Telex EMS-4001, service manual, brief instructions and user manuals Telex EMS-4001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Telex EMS-4001.

Similar manuals

A complete manual for the device Telex EMS-4001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Telex EMS-4001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Telex EMS-4001.

A complete Telex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Telex EMS-4001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Telex EMS-4001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Telex EMS-4001, that we can find in the current document
3. Tips how to use the basic functions of the device Telex EMS-4001 - which should help us in our first steps of using Telex EMS-4001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Telex EMS-4001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Telex EMS-4001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Telex EMS-4001?

Use the form below

If you did not solve your problem by using a manual Telex EMS-4001, ask a question using the form below. If a user had a similar problem with Telex EMS-4001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)