English dropdown-ico

Manual Aegis Micro AEG-WR

12 pages 0.44 mb
Download

Go to site of 12

Summary
  • Aegis Micro AEG-WR - page 1

    Model AEG -WR Wireless Receiver Installation Manual - http://www.guardianalarms.net ...

  • Aegis Micro AEG-WR - page 2

    2 CONTENTS DESCRIPTION 3 COMPATIBLE TRANSMITTERS 3 INSTALLATION 4 OPERATION 5 RESET MEMORY 9 AEGIS SET UP 9 CONTROLLER INDICATIONS 10 FCC NOTICE 11 ...

  • Aegis Micro AEG-WR - page 3

    3 DESCRIPTION The Model AEG - WR Supervised Wireless Receiver allows up to 64 unique wireless security transmitters to report information to an Ae gis automation controller. The wireless transmitters replace wired door and window sensors, as well as wired smoke, motion, and glassbreak detectors. These transmitters report status information to the A ...

  • Aegis Micro AEG-WR - page 4

    4 up to four transmitters assigned to it depending on the number of addresses assigned to the receiver. The 6 4 transmitters are divided into 4 groups of 16, with the transmitters in each group numbered 1 - 16. One or more groups respond to each address assigned to the receiver. When multiple groups respond to the same address, the corresponding tr ...

  • Aegis Micro AEG-WR - page 5

    5 Place the cover on the receiver and install the antenna onto the antenna connector. Connect the receiver to the controller using 4 conductor 22 gauge or larger wire as follows: OPERATION The two operating modes of the receiver are "Run" and "Set Up". In Run mod e, with the receiver connected to the controller, the Mode LED sho ...

  • Aegis Micro AEG-WR - page 6

    6 (not ready) or that have trouble. The transmitter number flashes on the display followed by the status condition(s). LED DISPLAY INFORMATION ABOUT THE LED DISPLAY 1.10 Displays the number of the transmitter with a change in condition. A L Displays that the current transmitter is "NOT READY ". C O Displays that the cover was removed from ...

  • Aegis Micro AEG-WR - page 7

    7 The Set Up mode is used to configure the general operation of the receiver, to program a transmitter into the receiver, and to change the characteristics of a programmed transmitter. The Mode LED does not blink in Set Up mode. To enter the Set Up mode, press and hold the Mode/Advance switch for approximately two seconds. You are first prompted to ...

  • Aegis Micro AEG-WR - page 8

    8 The next four items allow you to change each digit of your security code. The Set switch is used to increment the value of each digit. The Mode/Advance switch is used to enter each digit and advance to the next. Next, the programmed characteristics o f each transmitter is displayed. The transmitter number is shown in the LED Display. If no transm ...

  • Aegis Micro AEG-WR - page 9

    9 Once a transmitter is programmed into an address, the transmitter address will briefly turn off whenever a transmission from that transmitter is received. This can be used to verify that the correct transmitter has been programmed and is o perating reliably. NOTE: The current status of each transmitter is ignored by the controller while the recei ...

  • Aegis Micro AEG-WR - page 10

    10 If Expansion Enclosures are also being used, set "NUMBER OF EXP ENCL:" to the number of expansion enclosu res plus the number of addresses used by the receiver. Set the addresses for the expansion enclosures and receiver so that they don't overlap. After the receiver has been enabled, you can press the down arrow ( ò ) key to set ...

  • Aegis Micro AEG-WR - page 11

    FCC NOTICE This device complies with FCC Ru les Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Verified to comp ly with the limits of a Class B digital device pursu ...

  • Aegis Micro AEG-WR - page 12

    QUICK - REFERENCE SETUP GUIDE To Enter Set Up mode, press and hold the Mode/Advance switch for 2 seconds. DISPLAY DESCRIPTION SET SWITCH MODE/ADVANCE SWITCH C 0 Enter the first digit of the code I ncrements the digit (0 - 9) Advances to the next digit C 0. Enter the second digit of the code Increments the digit (0 - 9) Advances to the next digit C. ...

Manufacturer Aegis Micro Category Home Security System

Documents that we receive from a manufacturer of a Aegis Micro AEG-WR can be divided into several groups. They are, among others:
- Aegis Micro technical drawings
- AEG-WR manuals
- Aegis Micro product data sheets
- information booklets
- or energy labels Aegis Micro AEG-WR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Aegis Micro AEG-WR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Aegis Micro AEG-WR, service manual, brief instructions and user manuals Aegis Micro AEG-WR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Aegis Micro AEG-WR.

Similar manuals

A complete manual for the device Aegis Micro AEG-WR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Aegis Micro AEG-WR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Aegis Micro AEG-WR.

A complete Aegis Micro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Aegis Micro AEG-WR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Aegis Micro AEG-WR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Aegis Micro AEG-WR, that we can find in the current document
3. Tips how to use the basic functions of the device Aegis Micro AEG-WR - which should help us in our first steps of using Aegis Micro AEG-WR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Aegis Micro AEG-WR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Aegis Micro AEG-WR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Aegis Micro AEG-WR?

Use the form below

If you did not solve your problem by using a manual Aegis Micro AEG-WR, ask a question using the form below. If a user had a similar problem with Aegis Micro AEG-WR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)