English dropdown-ico

Manual Brinkmann SL-7

12 pages Not applicable
Download

Go to site of 12

Summary
  • Brinkmann SL-7 - page 1

    MODEL SL-7 OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS INSTR_821-7000-0_SL7.qxd 5/17/06 4:29 PM Page 1 ...

  • Brinkmann SL-7 - page 2

    HOW YOUR HOME SECURITY MOTION ACTIV A TED LIGHTING SYSTEM WORKS The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone. The light will turn off in approximately 90 seconds after the perso ...

  • Brinkmann SL-7 - page 3

    P ARTS LIST : Home Security Main Housing Main Housing Mounting Screws (2) Solar Panel Module with Cord Solar Panel Module Mounting Screws (3) SL-7 Owner’ s Manual 2 ASSEMBL Y INSTRUCTIONS Inspect contents of the box to ensure all parts are included and undamaged. A Phillips screwdriver will be required. 1 2 3 4 5 Step 1 Select a location and atta ...

  • Brinkmann SL-7 - page 4

    3 Step 3 Slide the two slots in the back of main housing onto the screws. Step 4 Select a location within 15 feet from the main housing to mount the solar panel module. The solar panel module must be mounted where it will receive FULL, DIRECT SUNLIGHT for several hours each day . Step 5 Firmly plug the solar panel module cord into the main housing. ...

  • Brinkmann SL-7 - page 5

    4 Step 8 Point the two floodlights in the desired direction. Y ou may want to adjust the floodlights after letting the unit operate for a few nights. Step 9 Position the detector head in the direction you want to cover . Never aim the motion detector head directly at the sun or above a 90° angle (horizontal level). Do not rotate the head more than ...

  • Brinkmann SL-7 - page 6

    5 Step 1 After installing your light, leave the switch in the “OFF” position and charge in FULL, DIRECT SUNLIGHT for THREE FULL SUNNY DAYS. Step 2 After allowing the battery to fully charge, the motion detector can be adjusted and tested. Point the motion detector head down 15° from horizontal level. Step 3 Move the slide switch to “TEST” ...

  • Brinkmann SL-7 - page 7

    6 T erminal Wire Connector Changing Batteries 1. Unscrew the four screws in front housing and separate it from rear housing. 2. Carefully peel the tape off the battery , leaving wires attached to tape. 3. Remove the battery from rear housing, being careful not to pull on wires. 4. Disconnect wires from battery terminals and remove battery . 5. Conn ...

  • Brinkmann SL-7 - page 8

    7 1. Clean snow and debris off the solar panel so the batter y can recharge. 2. Check and replace batter y periodically throughout the year , especially after winter months. Wintertime Tips Solar security lights can be left outside year round, even in cold weather . However , if you wish to store your light indoors for more than two or three days, ...

  • Brinkmann SL-7 - page 9

    8 Note: After installing the main housing and solar panel module, leave the switch in the “OFF” position and charge in FULL, DIRECT SUNLIGHT for THREE FULL DA YS. Then remove the switch label and slide the switch to the “AUTO” position. The light will turn on automatically at night when it detects motion. T roubleshooting & Important In ...

  • Brinkmann SL-7 - page 10

    cut along dotted line TEMPLA TE Screw Hole Screw Hole 9 INSTR_821-7000-0_SL7.qxd 5/17/06 4:29 PM Page 10 ...

  • Brinkmann SL-7 - page 11

    10 HOME SECURITY ACCESSORIES For Visa/MasterCard orders, please call 800-468-5252, Monday through Friday , 8:30 AM - 5:00 PM Central Standard Time. 100-0057-0 Replacement Bulb 070-6001-0 SL-7 Replacement Battery 112-0010-0 15 ft. Extension Cord INSTR_821-7000-0_SL7.qxd 5/17/06 4:29 PM Page 11 ...

  • Brinkmann SL-7 - page 12

    For one year from date of purchase, The Brinkmann Corporation warrants the Home Security Motion Activated Lighting System against defects due to workmanship or materials to the original purchaser . The Brinkmann Corporation’ s obligations under this warranty are limited to the following guidelines: • This warranty does not extend to the bulb or ...

Manufacturer Brinkmann Category Motion detector

Documents that we receive from a manufacturer of a Brinkmann SL-7 can be divided into several groups. They are, among others:
- Brinkmann technical drawings
- SL-7 manuals
- Brinkmann product data sheets
- information booklets
- or energy labels Brinkmann SL-7
All of them are important, but the most important information from the point of view of use of the device are in the user manual Brinkmann SL-7.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Brinkmann SL-7, service manual, brief instructions and user manuals Brinkmann SL-7. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Brinkmann SL-7.

Similar manuals

A complete manual for the device Brinkmann SL-7, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Brinkmann SL-7 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Brinkmann SL-7.

A complete Brinkmann manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Brinkmann SL-7 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Brinkmann SL-7, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Brinkmann SL-7, that we can find in the current document
3. Tips how to use the basic functions of the device Brinkmann SL-7 - which should help us in our first steps of using Brinkmann SL-7
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Brinkmann SL-7
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Brinkmann SL-7 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Brinkmann SL-7?

Use the form below

If you did not solve your problem by using a manual Brinkmann SL-7, ask a question using the form below. If a user had a similar problem with Brinkmann SL-7 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)