English dropdown-ico

Manual Zenoah BC3401DL

36 pages 0.89 mb
Download

Go to site of 36

Summary
  • Zenoah BC3401DL - page 1

    The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WARNING O WNER / OPERA T OR MANU AL BR USHCUTTERS 848-G6D-93A2 (705) BC3401DL BC4401D W Thank you for purchasing a RedMax product. Before using our brushcutters, please read this manual carefully to und ...

  • Zenoah BC3401DL - page 2

    Read this manual carefull y to understand all safety precautions, contr ols, pr oper operation and maintenance of y our RedMax brushcutters. F ailure to do so could result in serious injury . Instructions labeled as shown at left, concer n critical steps or procedures which must be f ollo wed in order to pre vent accidents which could lead to ser i ...

  • Zenoah BC3401DL - page 3

    CONTENTS Specifications······························································································· 4 Emission control label························································ ...

  • Zenoah BC3401DL - page 4

     4  Specifications ■ BC3401DL Overall size(LxWxH) ····················································· 67.7x12.6x13.6(in) / 1720x320x345(mm) Dry weight w/o acc. ·······························································? ...

  • Zenoah BC3401DL - page 5

    BC3401DL IMPORT ANT ENGINE INFORMA TION COMPLIANCE PERIOD : CA TEGOR Y A ENGINE F AMIL Y : 7KZXS.0344UV ; EM *1 ENGINE DISPLA CEMENT : 34cc REFER TO OWNER ’ S MANUAL FOR MAINTE- NANCE SPECIFICA TIONS AND ADJUSTMENTS. MANUF A CTURED : THIS ENGINE CONFORMS TO U .S. EP A PH1 FOR SMALL OFF-RO AD ENGINES. ZENOAH CO. ,L TD. USE JASO FC OR ISO EGC GRADE ...

  • Zenoah BC3401DL - page 6

     6  ■ In order to ensure proper and safe operation of your brushcutter • Read this Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury. • Be sure to keep this manual handy so that you may refer to it later whenever any questions aris ...

  • Zenoah BC3401DL - page 7

    Safety Precautions ■ Work gear and clothing • When using your brushcutter, always be sure to wear strong, durable, work clothing; shirts should be long-sleeved shirts and pants should be full-length pants reaching down to the ankles. • Always be sure to wear helmet and face protector when using your brushcutter. • When using your brushcutte ...

  • Zenoah BC3401DL - page 8

     8  Safety Precautions ■ Things to check before using your brushcutter • Before beginning work, look around carefully to get a feel for the shape of the land, grass to be trimmed, and whether or not there are any obstacles which might get in the way while working, and remove any obstacles before beginning work. • The area within a perim ...

  • Zenoah BC3401DL - page 9

    ■ Things to be careful about when using your brushcutter • When using your brushcutter, grip the handles of the brushcutter firmly with both hands, place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even pos ...

  • Zenoah BC3401DL - page 10

     10  Safety Precautions ■ Notes on care and maintenance of your brushcutter • In order to maintain your brushcutter in proper working order, perform the maintenance and checking operations described in this manual at regular intervals. In the event that any parts must be replaced or any maintenance or repair work not described in this man ...

  • Zenoah BC3401DL - page 11

    ■ MOUNTING ENGINE • Put the engine onto the clutch side end of the driveshaft assembly, making the fuel tank and the cutter head come to the same side. Attach the engine firmly with the 4 screw provided. ■ INSTALLING HANDLE • Mount the handle to the shaft tube and clamp it at your best operating position. ■ INSTALLING DEBRIS GUARD • Put ...

  • Zenoah BC3401DL - page 12

    ■ PUTTING ON WAIST PAD (BC4401DW only) • Warp the waist pad around the shaft tube and the throttle wire. ■ INSTALLING CUTTING HEAD 1. While locking the gear shaft by inserting the attached bar into the upper holder and the gear box, loosen and remove the hexagon bolt(left-handed) 2. Fit the spacer attached to the head assembly between the upp ...

  • Zenoah BC3401DL - page 13

    Fuel  13  ■ RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1 (when using RedMax/ZENOAH genuine oil) • Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion. • These ...

  • Zenoah BC3401DL - page 14

     14  Fuel again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizing due to abnormally lean mixture. 5. Put a clear indication on the ...

  • Zenoah BC3401DL - page 15

    • Keep bystanders and animals at least 50 feet (15m) away from the operating point. If you are approached, immediately stop the engine. ■ STARTING ENGINE 1. Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine. 2. Pump the primer until fu ...

  • Zenoah BC3401DL - page 16

    ■ STOPPING ENGINE 1. Release the throttle lever and run the engine for a half minute. 2. Shift the ignition switch to the STOP position. • Except for an emergency, avoid stopping the engine while pulling the throttle lever. ■ ADJUSTING IDLING SPEED 1. When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise. 2. ...

  • Zenoah BC3401DL - page 17

     17  Under growth Heavy weeds Light weeds Grass BC3401DL BC4401DW Saw blade 6298-11313 10” 6298-15343 10” 6298-14343 10” PT104 4” PT100 6” 8-teeth blade 4-teeth blade Nylon line head CUTTER APPLICATION CHART Optional Blade Usage ■ CHOOSE THE BLADE Choose a suitable recommended cutting attachment according to the object to be cut. ...

  • Zenoah BC3401DL - page 18

     18  Optional Blade Usage Change to the debris guard which is suitable for the metal blade. (OPT3) (1) Bolt : 3540-24130 x 2 pieces (2) Spring washer : 0290-20615 x 2 pieces (3) Clamp : 3541-24121 (4) Guard : 3541-24112 (5) Guard ass’y : 3541-24001 130~174 in-lbs TIGHTENING TORQUE: (14.7~19.6 N.m.) Change the loop handle to the J-handle for ...

  • Zenoah BC3401DL - page 19

    Optional Blade Usage depth according to the condition of object. • If the grass or other object gets caught in the blade, or if the unit starts to shake or vibrate, turn off the engine and check the whole unit. Change the blade if it has been damaged. • Turn off the engine and make sure the blade has completely stop before checking the blade, a ...

  • Zenoah BC3401DL - page 20

     20  ■ CONTROLLING BLADE BOUNCE • Blade thrust can cause serious personal injury. Carefully study this section. It is important that you understand what causes blade thrust, how you can reduce the chance of blade thrust and how you can remain in control of the unit if blade thrust does occur. 1. What causes blade thrust: • Blade thrust ...

  • Zenoah BC3401DL - page 21

    Optional Blade Usage OPT9 3. How you can maintain the best control: a. Keep a good, firm grip on the unit with both hands. A firm grip can help neutralize bounce. Keep your right and left hands completely around the respective handles. b. Keep both feet spread apart in a comfortable stance and yet braced for the possibility that the unit could boun ...

  • Zenoah BC3401DL - page 22

    •A lways be sure to stop the engine before inspecting the brushcutter for problems or performing maintenance. • Never alter the brushcutter or take the engine apart. • When replacing parts, always be sure to use only RedMax products or products which have been certified by RedMax for use with the RedMax brushcutter. • Things to check before ...

  • Zenoah BC3401DL - page 23

    ■ FUEL FILTER • When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage. ■ SPARK PLUG • Starting failure and mis-firing are often caused by a fouled spark plug. Periodically clean the spark plug and check that the spark gap is in the correct range. For a replacement plug, use the correct type specified ...

  • Zenoah BC3401DL - page 24

    • If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter. ■ PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE 1. Remove the muffler, insert a screwdriver into the vent, and wip ...

  • Zenoah BC3401DL - page 25

    Pa r ts List NOTE : 1. Use RedMax/ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. RedMax/ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company. 3. When placing parts orders for repair and/or replacement, check if the model name and the se ...

  • Zenoah BC3401DL - page 26

    Pa r ts List  26  Fig.1 DRIVE UNIT BC3401DL (S/N 60200000 and up) ...

  • Zenoah BC3401DL - page 27

    Fig.1 DRIVE UNIT BC3401DL (S/N 60200000 and up) Key# Description Part Number Q'ty 1 HOUSING 4050-11110 1 2 CAP 4050-11150 1 3 JOINT 4050-11210 1 4 ABSORBER-F 4050-11250 1 5 ABSORBER-R 4050-11260 1 6 BOLT 01252-30530 4 7 BOLT 01252-30630 1 8 BOLT 01252-30510 1 9 DRUM, clutch 848-B81-51A1 1 10 BEARING T3149-11350 1 11 SNAPRING 04065-03515 1 12 S ...

  • Zenoah BC3401DL - page 28

    Fig.2 ENGINE UNIT BC3401DL (S/N 60200000 and up)  28  Pa r ts List ...

  • Zenoah BC3401DL - page 29

     29  Fig.2 ENGINE UNIT BC3401DL (S/N 60200000 and up) Key# Description Part Number Q'ty 1 CYLINDER T1151-12110 1 2 BOLT 1850-12130 4 3 GASKET, base 4500-13120 1 4 CRANKCASE COMP. 4500-21101 1 5• PIN 2629-21130 3 6 GUARD 4500-22110 1 7 SCREW 0263-90514 1 8 GASKET, case 4500-21140 1 9 BEARING 06030-06201 2 10 OIL SEAL 4810-21210 1 11 OIL ...

  • Zenoah BC3401DL - page 30

    Pa r ts List  30  Fig.3 DRIVE UNIT BC4401D W (S/N 60200000 and up) ...

  • Zenoah BC3401DL - page 31

    Fig.3 DRIVE UNIT BC4401D W (S/N 60200000 and up) Key# Description Part Number Q'ty 1 HOUSING 4050-11110 1 2 CAP 4050-11150 1 3 JOINT 4050-11210 1 4 ABSORBER-F 4050-11250 1 5 ABSORBER-R 4050-11260 1 6 BOLT 01252-30530 4 7 BOLT 01252-30630 1 8 BOLT 01252-30510 1 9 DRUM, clutch 848-B81-51A1 1 10 BEARING T3149-11350 1 11 SNAPRING 04065-03515 1 12 ...

  • Zenoah BC3401DL - page 32

    Fig.4 ENGINE UNIT BC4401D W (S/N 60200000 and up)  32  Pa r ts List ...

  • Zenoah BC3401DL - page 33

     33  Fig.4 ENGINE UNIT BC4401D W (S/N 60200000 and up) Key# Description Part Number Q'ty 1 CYLINDER 848-G6D-12A0 1 2 BOLT 1850-12130 4 3 GASKET, base 4500-13120 1 4 CRANKCASE COMP. 4500-21101 1 5• PIN 2629-21130 3 6 GUARD 4500-22110 1 7 SCREW 0263-90514 1 8 GASKET, case 4500-21140 1 9 BEARING 06030-06201 2 10 OIL SEAL 4810-21210 1 11 O ...

  • Zenoah BC3401DL - page 34

    EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT, RedMax / ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. EMISSION-RELATED PARTS ARE: THE CARBURETOR ...

  • Zenoah BC3401DL - page 35

    Pièces en rapport avec les émissions de gaz d'échappement : RedMax / ZENOAH AMERICA, INC., par l'intermédiaire de n'importe quel revendeur RedMax, réparera gratuitement ou remplacera gratuitement pour l'acheteur initial et chaque acheteur successif toute(s) pièce(s) se révélant de constitution et/ou de montage défectueu ...

  • Zenoah BC3401DL - page 36

    ZENOAH AMERICA, INC. 1100 Laval Blvd. Suite 110 Lawrenceville, Georgia 30043 ©P rinted in Japan ...

Manufacturer Zenoah Category Brush Cutter

Documents that we receive from a manufacturer of a Zenoah BC3401DL can be divided into several groups. They are, among others:
- Zenoah technical drawings
- BC3401DL manuals
- Zenoah product data sheets
- information booklets
- or energy labels Zenoah BC3401DL
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zenoah BC3401DL.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zenoah BC3401DL, service manual, brief instructions and user manuals Zenoah BC3401DL. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zenoah BC3401DL.

Similar manuals

A complete manual for the device Zenoah BC3401DL, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zenoah BC3401DL by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zenoah BC3401DL.

A complete Zenoah manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zenoah BC3401DL - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zenoah BC3401DL, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zenoah BC3401DL, that we can find in the current document
3. Tips how to use the basic functions of the device Zenoah BC3401DL - which should help us in our first steps of using Zenoah BC3401DL
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zenoah BC3401DL
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zenoah BC3401DL in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zenoah BC3401DL?

Use the form below

If you did not solve your problem by using a manual Zenoah BC3401DL, ask a question using the form below. If a user had a similar problem with Zenoah BC3401DL it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)