-
Omega Vehicle Security HHP-2000 Series - page 1
1 1 40 40 M-3168/1003 XG.0747 rev .3 M-3168/1003 XG.0747 rev .3 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® OPERA TING INSTRUCTIONS HHP -2000 SERIES MANOMETER An OMEGA T echnologies Company ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® OPERA TING INSTRUCTIONS HHP -2000 SERIES MANOMETER An OMEGA T echnologies Company ® TEST RESUL TS This instrum ...
-
Omega Vehicle Security HHP-2000 Series - page 2
2 2 39 39 Some of the options described may not apply to this instrument. Please check the functions of the instrument you have purchased before you proceed. Some of the options described may not apply to this instrument. Please check the functions of the instrument you have purchased before you proceed. Particular care should be taken not to over ...
-
Omega Vehicle Security HHP-2000 Series - page 3
38 38 3 3 BACKLIGHT ON Press and hold key . BACKLIGHT ON Press and hold key . DISPLA Y DISPLA Y OUT OF RANGE Out If pressure exceeds the scale range will appear on the display . OUT OF RANGE Out If pressure exceeds the scale range will appear on the display . ZEROING Models HHP-2000, 2001, 2002, 2003, 2020, 2021, 2022, 2023 0.0 Models HHP-2080, 208 ...
-
Omega Vehicle Security HHP-2000 Series - page 4
4 4 37 37 HOSE FITTING The input port(s) on the instrument are designed to accept a hose with 4mm I.D. and 1mm wall. The hose is fitted by unscrewing the clamping nut, sliding the hose on to the stepped shaft and refitting the nut. Note: Do not tighten fittings attached to the pressure ports to a torque greater than 2Nm otherwise the pressure seals ...
-
Omega Vehicle Security HHP-2000 Series - page 5
36 36 5 5 ADV ANCED FUNCTIONS The following additional functions apply to models HHP-2080, 2081, 2082, 2083, 2084, 2085 ADV ANCED FUNCTIONS The following additional functions apply to models HHP-2080, 2081, 2082, 2083, 2084, 2085 RANGE LOCK This instrument has a Range Lock feature that displays readings to the best resolution, shown by / on the dis ...
-
Omega Vehicle Security HHP-2000 Series - page 6
6 6 35 35 LEAK TESTING This function enables testing for leaks in pressure systems. The instrument has a function to automate leak testing in a variety of applications. Automatic leak test results are logged, not stored and cannot be output directly via HHP-2000DL into your ML WIN software. T o send leak test results to your PC please use your PC? ...
-
Omega Vehicle Security HHP-2000 Series - page 7
34 34 7 7 PERFORMING A TEST This test only functions if the symbol is displayed. Apply pressure to system until changes to (T est Pressure). If a (pre- stress) pressure has been entered the system must be pressurised to this level. Bleed system. The display will then clear until test time has elapsed. or will appear on the display and be automatica ...
-
Omega Vehicle Security HHP-2000 Series - page 8
8 8 33 33 Einige der berschriebenen optionen kÖnnen mÖglicherweise nicht auf dieses instrument zutreffen. Überprüfen sie bitte die funktion des instrumentes, das sie gekauft habeb, bevor sie fortfahren. Einige der berschriebenen optionen kÖnnen mÖglicherweise nicht auf dieses instrument zutreffen. Überprüfen sie bitte die funktion des instr ...
-
Omega Vehicle Security HHP-2000 Series - page 9
32 32 9 9 HINTERGRUNDBELEUCHTUNG ON Die T aste gedrückt halten. HINTERGRUNDBELEUCHTUNG ON Die T aste gedrückt halten. ANZEIGE ANZEIGE BEREICHSÜBERSCHREITUNG Wenn der Druck über den Meßbereichsendwert hinaus oder unter- halb 0 geht, wird am Display angezeigt. BEREICHSÜBERSCHREITUNG Wenn der Druck über den Meßbereichsendwert hinaus oder unter ...
-
Omega Vehicle Security HHP-2000 Series - page 10
10 10 31 31 ANSCHLÜSSE Die Anschlußöffnung(en) des Gerätes sind für einen Schlauch mit 4mm Innendurchmesser und 1mm Wandstärke vorgesehen. Um diese Schlauchleitung zu montieren, ist die Klemm-Mutter zu lösen und die Schlauchleitung über den gestuften Schaft zu schieben. Klemm-Mutter wieder festschrauben. Beachten Sie: Befestigen Sie die an ...
-
Omega Vehicle Security HHP-2000 Series - page 11
30 30 11 11 ZUSÄTZLICHE FUNKTIONEN Modelle HHP-2080, 2081, 2082, 2083, 2084 und 2085 ZUSÄTZLICHE FUNKTIONEN Modelle HHP-2080, 2081, 2082, 2083, 2084 und 2085 weiteres Betätigen wechselt in den aktuellen Meßmodus. Beim Drücken der T aste wird der Durchschnittswert angezeigt erscheint am Display . Drücken Sie auf die T aste um in den aktuellen ...
-
Omega Vehicle Security HHP-2000 Series - page 12
12 12 29 29 LECKSUCH-MESSUNGEN In diesem Modus funktioniert das Gerät als Lecksucher und kann in sämtlichen Anwendungsbereichen benutzt werden. Die Lecksuch- Messungen sind gespeichert aber können nicht mittels HHP-2000DL auf Ihren PC eingelesen werden. Sie müssen das Hyperterminal Ihres PC’s verwenden um die Daten an Ihren PC senden und ausd ...
-
Omega Vehicle Security HHP-2000 Series - page 13
28 28 13 13 LECKSUCHE ST ARTEN Das Symbol muß angezeigt werden um diese Funktion zu benutzen. System speisen bis angezeigt ist. Wenn ein Druck eingegeben worden ist, muß das Gerät gemäß dieses Druckes gespeist werden. System entleeren. Die Anzeige wird gelöscht bis die Prüfzeit abgelaufen ist. oder erscheinen im Display und die T estergebnis ...
-
Omega Vehicle Security HHP-2000 Series - page 14
14 14 27 27 Algunas de las opciones descritas pueden no aplicarse a este instrumento. Controle por favor las functiones del instrumento que usted la comprado antes de que usted proceda. Algunas de las opciones descritas pueden no aplicarse a este instrumento. Controle por favor las functiones del instrumento que usted la comprado antes de que usted ...
-
Omega Vehicle Security HHP-2000 Series - page 15
26 26 15 15 PUEST A A CERO ABSOLUT A MODELOS HHP-2005, 2025 0.0 Nota MODELO HHP-2085 0.0 Esta facilidad permite corregir la presión ambiente indicada entre 900mbar y 1 100mbar . Abrir el orificio a la atmósfera y el instrumento indicará la presión ambiente. Pulsar la tecla y se visualiza 900mbar (o el equivalente en otras unidades). Mantener pu ...
-
Omega Vehicle Security HHP-2000 Series - page 16
16 16 25 25 INST ALACIÓN DE TUBO Los orificios de entrada del instrumento han sido diseñados para que acepten tubo de nilón de un diámetro interno de 4mm y un espesor de pared de 1mm. Para instalar el tubo, se desenrosca la tuerca de fijación, se desliza el tubo sobre la pieza escalonada y se repone la tuerca. Nota: No apretar los accesorios d ...
-
Omega Vehicle Security HHP-2000 Series - page 17
24 24 17 17 FUNCIONES A V ANZADAS Las siguientes funciones adicionales se refieren solamente a los modelos HHP-2080, 2081, 2082, 2083, 2084, 2085 FUNCIONES A V ANZADAS Las siguientes funciones adicionales se refieren solamente a los modelos HHP-2080, 2081, 2082, 2083, 2084, 2085 BLOQUEO DE RANGO A/R A/R A/R Este instrumento dispone de una función ...
-
Omega Vehicle Security HHP-2000 Series - page 18
18 18 23 23 PROMEDIO MAX/MIN MAX/MIN Pulsar la tecla (cuando se encuentre en el modo ) y el símbolo, junto con la lectura media, aparecerá visualizado. Pulsar para volver al modo . PROMEDIO MAX/MIN MAX/MIN Pulsar la tecla (cuando se encuentre en el modo ) y el símbolo, junto con la lectura media, aparecerá visualizado. Pulsar para volver al mod ...
-
Omega Vehicle Security HHP-2000 Series - page 19
22 22 19 19 CONFIGURACIÓN Pulsar la tecla (mientras no está en la modalidad ) ye se visualizan los símbolos y . Introducir el nivel de presión pre-tensada (si no se necesita la función de presión pre-tensada, pulsar la tecla ) y la visualización presentará los símbolos y . T eclear la presión de inicio y pulsar la tecla , y se visualizan ...
-
Omega Vehicle Security HHP-2000 Series - page 20
20 20 21 21 EXACTITUD DE LOS INSTRUMENTOS De +20°C a +30°C/+68°F , 0,1% de la lectura +0,1% escala total 1 dígito De -10°C a +50°C/+14°F a +122°F , 0,15% de la lectura +0,155 escala total 1 dígito EXACTITUD DE LOS INSTRUMENTOS De +20°C a +30°C/+68°F , 0,1% de la lectura +0,1% escala total 1 dígito De -10°C a +50°C/+14°F a +122°F , ...
-
Omega Vehicle Security HHP-2000 Series - page 21
20 20 21 21 EXACTITUD DE LOS INSTRUMENTOS De +20°C a +30°C/+68°F , 0,1% de la lectura +0,1% escala total 1 dígito De -10°C a +50°C/+14°F a +122°F , 0,15% de la lectura +0,155 escala total 1 dígito EXACTITUD DE LOS INSTRUMENTOS De +20°C a +30°C/+68°F , 0,1% de la lectura +0,1% escala total 1 dígito De -10°C a +50°C/+14°F a +122°F , ...
-
Omega Vehicle Security HHP-2000 Series - page 22
22 22 19 19 CONFIGURACIÓN Pulsar la tecla (mientras no está en la modalidad ) ye se visualizan los símbolos y . Introducir el nivel de presión pre-tensada (si no se necesita la función de presión pre-tensada, pulsar la tecla ) y la visualización presentará los símbolos y . T eclear la presión de inicio y pulsar la tecla , y se visualizan ...
-
Omega Vehicle Security HHP-2000 Series - page 23
18 18 23 23 PROMEDIO MAX/MIN MAX/MIN Pulsar la tecla (cuando se encuentre en el modo ) y el símbolo, junto con la lectura media, aparecerá visualizado. Pulsar para volver al modo . PROMEDIO MAX/MIN MAX/MIN Pulsar la tecla (cuando se encuentre en el modo ) y el símbolo, junto con la lectura media, aparecerá visualizado. Pulsar para volver al mod ...
-
Omega Vehicle Security HHP-2000 Series - page 24
24 24 17 17 FUNCIONES A V ANZADAS Las siguientes funciones adicionales se refieren solamente a los modelos HHP-2080, 2081, 2082, 2083, 2084, 2085 FUNCIONES A V ANZADAS Las siguientes funciones adicionales se refieren solamente a los modelos HHP-2080, 2081, 2082, 2083, 2084, 2085 BLOQUEO DE RANGO A/R A/R A/R Este instrumento dispone de una función ...
-
Omega Vehicle Security HHP-2000 Series - page 25
16 16 25 25 INST ALACIÓN DE TUBO Los orificios de entrada del instrumento han sido diseñados para que acepten tubo de nilón de un diámetro interno de 4mm y un espesor de pared de 1mm. Para instalar el tubo, se desenrosca la tuerca de fijación, se desliza el tubo sobre la pieza escalonada y se repone la tuerca. Nota: No apretar los accesorios d ...
-
Omega Vehicle Security HHP-2000 Series - page 26
26 26 15 15 PUEST A A CERO ABSOLUT A MODELOS HHP-2005, 2025 0.0 Nota MODELO HHP-2085 0.0 Esta facilidad permite corregir la presión ambiente indicada entre 900mbar y 1 100mbar . Abrir el orificio a la atmósfera y el instrumento indicará la presión ambiente. Pulsar la tecla y se visualiza 900mbar (o el equivalente en otras unidades). Mantener pu ...
-
Omega Vehicle Security HHP-2000 Series - page 27
14 14 27 27 Algunas de las opciones descritas pueden no aplicarse a este instrumento. Controle por favor las functiones del instrumento que usted la comprado antes de que usted proceda. Algunas de las opciones descritas pueden no aplicarse a este instrumento. Controle por favor las functiones del instrumento que usted la comprado antes de que usted ...
-
Omega Vehicle Security HHP-2000 Series - page 28
28 28 13 13 LECKSUCHE ST ARTEN Das Symbol muß angezeigt werden um diese Funktion zu benutzen. System speisen bis angezeigt ist. Wenn ein Druck eingegeben worden ist, muß das Gerät gemäß dieses Druckes gespeist werden. System entleeren. Die Anzeige wird gelöscht bis die Prüfzeit abgelaufen ist. oder erscheinen im Display und die T estergebnis ...
-
Omega Vehicle Security HHP-2000 Series - page 29
12 12 29 29 LECKSUCH-MESSUNGEN In diesem Modus funktioniert das Gerät als Lecksucher und kann in sämtlichen Anwendungsbereichen benutzt werden. Die Lecksuch- Messungen sind gespeichert aber können nicht mittels HHP-2000DL auf Ihren PC eingelesen werden. Sie müssen das Hyperterminal Ihres PC’s verwenden um die Daten an Ihren PC senden und ausd ...
-
Omega Vehicle Security HHP-2000 Series - page 30
30 30 11 11 ZUSÄTZLICHE FUNKTIONEN Modelle HHP-2080, 2081, 2082, 2083, 2084 und 2085 ZUSÄTZLICHE FUNKTIONEN Modelle HHP-2080, 2081, 2082, 2083, 2084 und 2085 weiteres Betätigen wechselt in den aktuellen Meßmodus. Beim Drücken der T aste wird der Durchschnittswert angezeigt erscheint am Display . Drücken Sie auf die T aste um in den aktuellen ...
-
Omega Vehicle Security HHP-2000 Series - page 31
10 10 31 31 ANSCHLÜSSE Die Anschlußöffnung(en) des Gerätes sind für einen Schlauch mit 4mm Innendurchmesser und 1mm Wandstärke vorgesehen. Um diese Schlauchleitung zu montieren, ist die Klemm-Mutter zu lösen und die Schlauchleitung über den gestuften Schaft zu schieben. Klemm-Mutter wieder festschrauben. Beachten Sie: Befestigen Sie die an ...
-
Omega Vehicle Security HHP-2000 Series - page 32
32 32 9 9 HINTERGRUNDBELEUCHTUNG ON Die T aste gedrückt halten. HINTERGRUNDBELEUCHTUNG ON Die T aste gedrückt halten. ANZEIGE ANZEIGE BEREICHSÜBERSCHREITUNG Wenn der Druck über den Meßbereichsendwert hinaus oder unter- halb 0 geht, wird am Display angezeigt. BEREICHSÜBERSCHREITUNG Wenn der Druck über den Meßbereichsendwert hinaus oder unter ...
-
Omega Vehicle Security HHP-2000 Series - page 33
8 8 33 33 Einige der berschriebenen optionen kÖnnen mÖglicherweise nicht auf dieses instrument zutreffen. Überprüfen sie bitte die funktion des instrumentes, das sie gekauft habeb, bevor sie fortfahren. Einige der berschriebenen optionen kÖnnen mÖglicherweise nicht auf dieses instrument zutreffen. Überprüfen sie bitte die funktion des instr ...
-
Omega Vehicle Security HHP-2000 Series - page 34
34 34 7 7 PERFORMING A TEST This test only functions if the symbol is displayed. Apply pressure to system until changes to (T est Pressure). If a (pre- stress) pressure has been entered the system must be pressurised to this level. Bleed system. The display will then clear until test time has elapsed. or will appear on the display and be automatica ...
-
Omega Vehicle Security HHP-2000 Series - page 35
6 6 35 35 LEAK TESTING This function enables testing for leaks in pressure systems. The instrument has a function to automate leak testing in a variety of applications. Automatic leak test results are logged, not stored and cannot be output directly via HHP-2000DL into your ML WIN software. T o send leak test results to your PC please use your PC? ...
-
Omega Vehicle Security HHP-2000 Series - page 36
36 36 5 5 ADV ANCED FUNCTIONS The following additional functions apply to models HHP-2080, 2081, 2082, 2083, 2084, 2085 ADV ANCED FUNCTIONS The following additional functions apply to models HHP-2080, 2081, 2082, 2083, 2084, 2085 RANGE LOCK This instrument has a Range Lock feature that displays readings to the best resolution, shown by / on the dis ...
-
Omega Vehicle Security HHP-2000 Series - page 37
4 4 37 37 HOSE FITTING The input port(s) on the instrument are designed to accept a hose with 4mm I.D. and 1mm wall. The hose is fitted by unscrewing the clamping nut, sliding the hose on to the stepped shaft and refitting the nut. Note: Do not tighten fittings attached to the pressure ports to a torque greater than 2Nm otherwise the pressure seals ...
-
Omega Vehicle Security HHP-2000 Series - page 38
38 38 3 3 BACKLIGHT ON Press and hold key . BACKLIGHT ON Press and hold key . DISPLA Y DISPLA Y OUT OF RANGE Out If pressure exceeds the scale range will appear on the display . OUT OF RANGE Out If pressure exceeds the scale range will appear on the display . ZEROING Models HHP-2000, 2001, 2002, 2003, 2020, 2021, 2022, 2023 0.0 Models HHP-2080, 208 ...
-
Omega Vehicle Security HHP-2000 Series - page 39
2 2 39 39 Some of the options described may not apply to this instrument. Please check the functions of the instrument you have purchased before you proceed. Some of the options described may not apply to this instrument. Please check the functions of the instrument you have purchased before you proceed. Particular care should be taken not to over ...
-
Omega Vehicle Security HHP-2000 Series - page 40
1 1 40 40 M-3168/1003 XG.0747 rev .3 M-3168/1003 XG.0747 rev .3 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® OPERA TING INSTRUCTIONS HHP -2000 SERIES MANOMETER An OMEGA T echnologies Company ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® OPERA TING INSTRUCTIONS HHP -2000 SERIES MANOMETER An OMEGA T echnologies Company ® TEST RESUL TS This instrum ...
Do you have a question concerning Omega Vehicle Security HHP-2000 Series?
Use the form below
If you did not solve your problem by using a manual Omega Vehicle Security HHP-2000 Series, ask a question using the form below. If a user had a similar problem with Omega Vehicle Security HHP-2000 Series it is likely that he will want to share the way to solve it.