English dropdown-ico

Manual Zanussi ZU 9124

24 pages 0.62 mb
Download

Go to site of 24

Summary
  • Zanussi ZU 9124 - page 1

    REFRIGERA T OR ZU 9124 2222682-42 INSTRUCTION BOOKLET ...

  • Zanussi ZU 9124 - page 2

    2 Instructions for the User Important Safety Instructions 3 Description of th e Appliance 4 Operation 5 Before use 5 Setting the temperature 5 Fresh food refrigeration 5 The door shelves 5 The -sta r compartment 6 Freezing fresh food 6 Frozen food storage 6 Thawing 6 Making ice cubes 6 Normal Operating Sounds 6 Health and Safety Guidelines 7 Defros ...

  • Zanussi ZU 9124 - page 3

    3 IMPORT ANT SAFETY INSTRUCTIONS Prior to Installation ■ Check the appliance for transport damage. Under no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer . Installation ■ This appliance is heavy . Care should be taken when moving it. ■ It is dangerous to alter the specifications or a ...

  • Zanussi ZU 9124 - page 4

    4 Servicing ■ This product should be serviced by an authorised engineer and only genuine spare parts should be used. ■ Under no circumstances should you attempt to repair the appliance yourself.Repairs carried out by inexperienced persons may cause injury or seri- ous malfunctioning. Contact your local Zanussi Service Force Centre. At the end o ...

  • Zanussi ZU 9124 - page 5

    5 OPERA TION Before use Remove all securing tapes. W ash inside the appli- ance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger . Dry thoroughly . Setting the temperature The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions ...

  • Zanussi ZU 9124 - page 6

    6 The -star compartment This compartment is suitable for freezing fresh food, for the storage of commercially frozen food and for ice cube making. Freezing fresh food T o freeze fresh foods it is not necessary to change the setting of the thermostat knob. However , for a quicker freezing operation, turn the thermostat knob to the coldest setting; b ...

  • Zanussi ZU 9124 - page 7

    7 Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever . The following tips should help you to ensure that the food in your home is in as perfect condi- tion as po ...

  • Zanussi ZU 9124 - page 8

    8 DEFROSTING The refrigerator automatically defrosts every time the compressor stops. The water is discharged, via the pipe, into a tray located beneath the appliance adja- cent to the compressor , where it evaporates. Important T o avoid defrost water overflowing and dripping onto the food in the fridge, periodically clean the water discharge hole ...

  • Zanussi ZU 9124 - page 9

    9 Changing the light bulb Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply , then replace the bulb as follows: 1. Unscrew the light cover and then pull it outward by pressing as shown in the figure. Unscrew the bulb and replace it with a new 15 watt bulb (avail- able from your nearest ...

  • Zanussi ZU 9124 - page 10

    10 If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for any in-guarantee service calls. Symptom ...

  • Zanussi ZU 9124 - page 11

    11 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning: 08705 929929 Y our call will be automatically routed to the Service Force Centre covering your post code area. The address of your local Service Force Centre is ...

  • Zanussi ZU 9124 - page 12

    12 ...

  • Zanussi ZU 9124 - page 13

    13 ...

  • Zanussi ZU 9124 - page 14

    14 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part there- of is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour , materials or carriage on condition that: ■ ...

  • Zanussi ZU 9124 - page 15

    15 TECHNICAL SPECIFICA TIONS Positioning For this appliance to work efficiently , it should be located away from heat sources, e.g. cookers, radia- tors, boilers, direct sunlight etc. Best performance is obtained with ambient temperature between +10°C and +32°C. For building-in and door reversibility , if necessary , refer to the relevant instruc ...

  • Zanussi ZU 9124 - page 16

    16 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suit- able for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug. The cut off plug shou ...

  • Zanussi ZU 9124 - page 17

    17 BUILDING-IN INSTRUCTIONS Before carrying out any work, remove the plug from the power socket. Inner door reversal 1. Using a screwdriver release bracket (1) by pressing on the internal spring (Fig.) and withdraw it from its seat together with the door; 2. remove plug (2) and fit it in the hole left open on the opposite side; 3. turn the door thr ...

  • Zanussi ZU 9124 - page 18

    18 T o reverse the opening direction of the door , proceed as shown in the figures: Attention After completion of the door reversing opera- tion, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fit- ting of the ...

  • Zanussi ZU 9124 - page 19

    19 Building the appliance in under a worktop The dimensions of the recessed installation area must correspond with those indicated in the figure. Remove covering and adjusting strips. Push the appliance into place. The plug socket neces- sary for connection of the appliance to the electricity supply should be positioned, so that the plug is not pla ...

  • Zanussi ZU 9124 - page 20

    20 T o mount the furniture door proceed as shown in the figures: ...

  • Zanussi ZU 9124 - page 21

    21 Screw appliance into place. Refit the covering strip. Fitting the plinth Important For the efficient operation of the appliance, it is important that the original ventilation grid is used. ■ For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments. The same applies to an open ...

  • Zanussi ZU 9124 - page 22

    ...

  • Zanussi ZU 9124 - page 23

    ...

  • Zanussi ZU 9124 - page 24

    © Electrolux Household Appliances Limited 2000 ...

Manufacturer Zanussi Category Refrigerator

Documents that we receive from a manufacturer of a Zanussi ZU 9124 can be divided into several groups. They are, among others:
- Zanussi technical drawings
- ZU 9124 manuals
- Zanussi product data sheets
- information booklets
- or energy labels Zanussi ZU 9124
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zanussi ZU 9124.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zanussi ZU 9124, service manual, brief instructions and user manuals Zanussi ZU 9124. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zanussi ZU 9124.

Similar manuals

A complete manual for the device Zanussi ZU 9124, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zanussi ZU 9124 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zanussi ZU 9124.

A complete Zanussi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zanussi ZU 9124 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zanussi ZU 9124, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zanussi ZU 9124, that we can find in the current document
3. Tips how to use the basic functions of the device Zanussi ZU 9124 - which should help us in our first steps of using Zanussi ZU 9124
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zanussi ZU 9124
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zanussi ZU 9124 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zanussi ZU 9124?

Use the form below

If you did not solve your problem by using a manual Zanussi ZU 9124, ask a question using the form below. If a user had a similar problem with Zanussi ZU 9124 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)