English dropdown-ico

Manual Lanner electronic FW-7870

52 pages 2.36 mb
Download

Go to site of 52

Summary
  • Lanner electronic FW-7870 - page 1

    FW -7870 Series 19” 1U Intel Pentium 4 Socket T Rackmount Network Security Platform User’s Manual ...

  • Lanner electronic FW-7870 - page 2

    ii Copyright and Disclaimers © Copyright 2004 - Lanner Electronics Inc. All Rights Reserved The contents in this publication have been thoroughly checked and considered accurate. The publisher and manufacturer of this product, La nner Electronics, is not responsible for any violation of patents or other rights of third parties resulting from its u ...

  • Lanner electronic FW-7870 - page 3

    iii Safety Instruc tions The following information relates to the safety of installation and maintenance personnel. Read all instructions before attempting to unpack, insta ll or operate this equipm ent, especially before connecting the power adapter . Please keep the following in mind as you unpack and install this equipment:  Always follow bas ...

  • Lanner electronic FW-7870 - page 4

    iv Getting T echnical Assistance Should you encounter questions or probl ems w ith your FW -7870, Lanner Electronics is ready to assist you within the guidelines of our product support programs. First, check the electronic product documentation for assistance. If you still cannot find the solution to your problem, contact Lanner sales team with the ...

  • Lanner electronic FW-7870 - page 5

    v T able of Contents Copyright and Disclaimers ....................................................................................................ii T rademark Acknowledgments ...............................................................................................ii Radio Frequency Emissions Notice........................................... ...

  • Lanner electronic FW-7870 - page 6

    vi 3.5 Advanced Chipset Features ........................................................................ 24 3.6 Integrated Peripherals ................................................................................. 26 3.7 Power Management Setup .......................................................................... 30 3.8 PnP/PCI Configuratio ...

  • Lanner electronic FW-7870 - page 7

    1 C h a p t e r 1 Getting Started 1.1 Introduction Figure 1 – FW -7870 Outlook The FW -7870 is a 1U rackmount network security solution targeting the Enterprise market. The FW -7870 supports Socket T for Intel Pen tium 4 processor with 533/800 MHz FSB. It is designed with an Intel 915GV as its northbri dge and ICH6(i82801FB) as its southbridge.; ...

  • Lanner electronic FW-7870 - page 8

    2 1.2 T echnical Specifications Model Name FW-7870 SBC SBC MB-X76A CPU Socket T(LGA 775) for Intel Pentium 4 Processor Chipset Intel 915GV/Intel i82801 FB BIOS Award BIOS Memory Two 184 pin DDR DIMM Network interface 4 ports PCI-E by Marvell 8053 Gigabit Ethernet 4 ports PCI by Marvell 8001 Gigabit Ethernet SSD one CompactFlash TypeII Socket I/O In ...

  • Lanner electronic FW-7870 - page 9

    3 1.3 Packing Contents Carefully unpack your package and make sure that you have the following items.  FW -7870 Network security Platform  Console cable  1.8 meters long cross-over Ethernet cable  1.8 meters long straight-through Ethern et cable  Power cable  Screw Set  CPU Cooler * 1  Slid & Bracket Set If you find anyt ...

  • Lanner electronic FW-7870 - page 10

    4 1.4 MB-X76 System Board MB-X76 is the system board bundled with the FW -7870 Network security platform. The succeeding sections list all MB-X76 related jump er settings and connector pin a ssignments. 1.4.1 Board Layout Figure 3 – MB-X7 6 Jumpers and Connectors ...

  • Lanner electronic FW-7870 - page 11

    5 1.4.2 Jumper Settings and I/O Connector The onboard jumper settings and I/O connector of MB-X76 are custom-tailored to fit the FW -7870 functionality . Changing the jumper se ttings may result in system malfunction or unforeseen damages. Jumper Settings and I/O Connector Summary for MB-X76 JUMPER FUNCTION CMOS1 Clear CMOS Data PKMB1 PS/2 keyboard ...

  • Lanner electronic FW-7870 - page 12

    6 PSC1:24 Pin ATX Power Connector FAN1-3 : 3 Pin FAN Connector) Pin No. Description 1 Ground 2 +12V 3 FA N S t a t u s PKMB1: PS/2 Keyboard & Mouse Connector (2x4 Header 2.54mm ) Pin No. Description 1 KBCLK 2 Ground 3 NC 4 KBDA T A 5 NC 6 MSDA T A 7 MSCLK 8 VCC Pin No. Description Pin No. Description 1 +3.3V 13 +3.3V 2 +3.3V 14 -12V 3 Ground 15 ...

  • Lanner electronic FW-7870 - page 13

    7 USBF1 ： USB Port #1 & #2 Connector 2x5 Pin 2.54mm Pin No. Descption Pin No. Description 1 USB_VCC 2 Grond 3 Key 4 USBD1+ 5 USBD0- 6 USBD1- 7 USBD0+ 8 Key 9 Ground 10 USB_VCC ...

  • Lanner electronic FW-7870 - page 14

    8 1.5 FW -7880 19” 1U Rackmount Firewall Mechanisms This section of the manual describes the mechan ical and device nomenclature of FW -7880. 1.5.1 Face Panel Figure 5 – FW -7870 Face Panel Face Panel LED S tatus and Behavior The following table lists and explains the beha vior of each LED on the FW -7870 front panel. LED Color St a t u s Descr ...

  • Lanner electronic FW-7870 - page 15

    9  Console Port: via the console port cable, this connector attaches FW -7870 to the host PC.  LCM & Keypad Please reference the Appendix B ...

  • Lanner electronic FW-7870 - page 16

    10 1.5.3 Rear View Figur e 6 – FW -7870 Rear V iew  Power Switch: Click the Power Switch , and the system will be power on. Faulty or impr oper use of the power adap tor may cause permanent damage to the power supply and the FW -7870. Plug the adap tor to an electrical wall outlet that matches its specifications. Power Switch ...

  • Lanner electronic FW-7870 - page 17

    C h a p t e r 2 FW-7870 Hardware Installation Guide 2.1 Hardware Installation Guide - Removing the Top Cover Step 1 : Unscrew Five screws from the system. Step 2 : Pull up the top cover Ste p 2 Ste p 1 ...

  • Lanner electronic FW-7870 - page 18

    - CPU Installation Step 1: Rem ove the fan cover scre w (3 pcs) Step 2: To l oosen the therm al modul e screw (4 pcs) Step 3: Ope n socket lever by pushing lever down a nd away from socket ...

  • Lanner electronic FW-7870 - page 19

    Step 4: Open load plate, (DO NOT TO UCH SOC KET CONTAC TS) Step 5: Align notches with socket. Step 6: Close load plate. Pressing down on l oad plate, close and e ngage soc ket lever. Step 7: Place the therm al module onto the main b oard, lock o n the therm al module screw ( 4pcs), then loc k on the fan m odule screw. ...

  • Lanner electronic FW-7870 - page 20

    - System Memory - Figure 1: The DIMM slot has a notch, the DIMM memory module only fit in on e direction. - Figure 2: Align the memory notch to the module and push the memory into the DIMM socket Figure 1-1 Figure 1-2 Figure 2-1 Figure 2-2 ...

  • Lanner electronic FW-7870 - page 21

    Installing Hard Disk Drive: Figure 1 : Put the Hard disk on the bracket, and screwing 4 screws. Figur e 1-1 F i g u r e 1 - 2 Figure 2: plug in the SATA power connector Figure 2 Figure 3: left side is power connector right side is SATA connector. Figure 3 ...

  • Lanner electronic FW-7870 - page 22

    Figure 4 : Screwing the HDD bracket screws (4pcs). Figure 4 - Installing Compact Flash Card Figure 1 : Insert the compact flash card into the slot carefully as shown in the picture. Figure1 - Installing the Mini-PCI Card Figure 1: Insert the PCI expansion card into the mini-PCI slot at 45 degree. Figure 2: Pus h down the PCI expansion card and the ...

  • Lanner electronic FW-7870 - page 23

    Chapter 3 Award BIOS Setup 3.1 BIOS Setup A ward‘s ROM BIOS provides a built-in Setup prog ram that allows users to modify the basic system configuration and settings. The modified data will be stored in a battery-backed CMOS RAM so that this data will be retained even when the power is turned of f. In general, the information saved in the CMOS R ...

  • Lanner electronic FW-7870 - page 24

    <Esc> Main Menu - Quit and not save changes in to CMOS Status Page Setup Menu and Option Page Set up Menu - E xit curr ent page and return to Main Menu <+/PgUp> Increase the num eric value or make chang es <-/PgDn> Decrease the num eric value or make changes <F1> General help, only for Status Pa ge Setup Menu and Option Page ...

  • Lanner electronic FW-7870 - page 25

    3.2 Main Menu Once you enter the AwardBIOS™ CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to s elect fro m several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu. Note that a brief description of each highlighted se ...

  • Lanner electronic FW-7870 - page 26

     Set Supervisor password Use this menu to set Supervisor Passwords.  Set User password Use this menu to set User Passwords.  Save & Exit Setup Save CMOS value changes to CMOS and exit setup.  Exit Without Saving Abandon all CMOS value changes and ex it setup. 3.3 Standard CMOS Features The items in S tandard CMOS Setup Menu are divi ...

  • Lanner electronic FW-7870 - page 27

    detailed options IDE Channel 1 Master Options are in its sub menu Press <Enter> to enter the sub menu of detailed options IDE Channel 2 Master Options are in its sub menu Press <Enter> to enter the sub menu of detailed options Halt On All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/Key Select the situation in whic ...

  • Lanner electronic FW-7870 - page 28

    Cylinder Min = 0 Max = 65535 Set the num ber of cylinde rs for this hard disk . Head M in = 0 Max = 255 Set the number of read/write heads Precomp Mi n = 0 Max = 65535 **** W arning : Setting a value of 65535 means no hard disk Landing zone Min = 0 Max = 65535 **** Sector Min = 0 Max = 255 Num ber of sectors per trac k 3.4 Advanced BIOS Features Th ...

  • Lanner electronic FW-7870 - page 29

    CPU L3 Cach e: The option enables secondary cache mem ory . If enabled is selected, external cache memory is enabled. If disabled is se lected, external cache mem ory is disabled. Hyper - Threading T echnology : Allows you to enable or disable th e CPU Hyper -Threading T echnology feature. Enabled Enables CPU Hy per Threading Feature. Please note t ...

  • Lanner electronic FW-7870 - page 30

    Boot Up Sequence. MPS V ersion Contr ol For OS : An MP Platform interface standard that extends the performance of the existing PC/A T platform beyond the traditional sing le processor limit, while maintaining 100 % PC/A T binary compatibility . OS Select Fo r DRAM > 64MB : The default setting is “Non -OS2”. Set to “OS2” if the system me ...

  • Lanner electronic FW-7870 - page 31

    DRAM Date I ntegrity Mode : Select Non-ECC or ECC (error -correcting code ), according to the type of installed DRAM. System BIOS Cacheable : Selecting “Enabled” allows c aching of the system BIOS ROM at F0000h – FFFFFh, resulting in better system perfo rmance. However , if any program writes to this memory area, a system error m ay result. T ...

  • Lanner electronic FW-7870 - page 32

    3.6 Integrated Peripherals On-Chip (Primary/Secondary) PCI IDE : The int egrated periphe ral control ler contains an IDE interface with support for two IDE channe ls. Select Enabled t o activate each channel separately . On-Chip Serial A T A : The integrated peripheral controller contains an Serial A T A interface with support for two Serial A T A ...

  • Lanner electronic FW-7870 - page 33

    controller an d you have a USB keyboar d. Onboard LA N Contr ol : This setting controls the onboard LAN Controller. Enabled Enable Onboa rd H/W LAN functi on. Disabled Disable Onboard H/W L AN functio n. LPT/LCM Control : Use this optio n to enable and c onfigure or disable t he LPT/LCM po rt present on the evaluatio n board. Configuration option s ...

  • Lanner electronic FW-7870 - page 34

    SuperIO Device : Scroll to this item and press <Enter> to view the following screen: Power On Fu nction/ KB Power ON Password/ Hot Ke y Power O n : This item allows the user to power on the system by pressing hot-keys, o r typing in a password . Onboard Serial Port 1 / Po rt 2 : : Select an a ddress and correspo nding interrupt for the first ...

  • Lanner electronic FW-7870 - page 35

    IR T ransmission Delay : When UAR T Mode is selected in IrDA or ASKIR mode, it allows you to enable / disable UR2 Duplex Mode (Half) : This field is available when UAR T 2 M ode is set to either ASKIR or IrDA. This item enables you to determine the in frared function of the onboard infrared chip. The options are Full and Hal f (default). Full-duple ...

  • Lanner electronic FW-7870 - page 36

    3.7 Power Management Setup The Power Management Setup allows you to c onfigure you system to most ef fectively save energy while operating in a manner consistent with your own style of computer use. ACPI Function : This item allows you to enable or disable the Advanced Configuration and Power Management (ACPI). The settings are “Enabled” and ? ...

  • Lanner electronic FW-7870 - page 37

    Suspend Mode When enabled and after the set time of system inactivity , all d evices except the CPU will be shu t off. Configuration options: Disabled / 1 Min / 2 Min / 4 Min / 8 Min / 12 Mi n / 20 Min / 30 Min / 40 Min / 1 Hour . HDD Power Down When enabled and after th e set time of system inactivity , the hard disk drive will be powered down whi ...

  • Lanner electronic FW-7870 - page 38

    3.8 PnP/PCI Configuration This section describes configuring the PCI bus system. PCI, or P ersonal C omputer I nterconnect, is a system which allows I/O devi ces to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended ...

  • Lanner electronic FW-7870 - page 39

    3.9 PC Health Status Throttling Temperature Detect CPU temperature automatically . FAN 1 / FAN 2 / FAN 3 Detect Fan1 / FAN2 speed status automa tically . ...

  • Lanner electronic FW-7870 - page 40

    3.11 Load Optimized Defaults When you press <Enter> on this item you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N) ? N 3.12 Supervisor/User Password Setting You can set either supervisor or user password, or both of then. The differences between are: Supervisor passwor d: can enter and change the optio ...

  • Lanner electronic FW-7870 - page 41

    ENTER PASSWORD: Type the password, up to eight characters in length, and press <Enter>. The password typed now will clear any previously entere d password from CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password. ...

  • Lanner electronic FW-7870 - page 42

    Pressing <Enter> on this item asks for confirmation: Save to CMOS and EXIT (Y/N)? Y Pressing “Y” stores the selections made in the menus in CMOS – a special section of memory that stays on after you turn your system off. The next time you boot your computer, the BIOS configures your system according to the Setup selections stored in CMO ...

  • Lanner electronic FW-7870 - page 43

    3.14 Exit Without Saving Pressing <Enter> on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setup without st oring in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your com puter. ...

  • Lanner electronic FW-7870 - page 44

    Appendix A Power Supply Power Supply Specification AC Input Spec : VOL T AGE 90 ~ 264 V AC F UL L RANGE Output Specifications Output V oltage Output Current Min. Output Current Max. Output Current Peak Regulation Load Regulation Line Output Ripple & Noise Max.[P-P] 5V 2 30.00 ± 5% ± 1% 50mV 12V 2 32.00 ± 5% ± 1% 120mV -5V 0.05 0.70 +5 ~ -10 ...

  • Lanner electronic FW-7870 - page 45

    Appendix B Watchdog Timer Intr oduction Most systems need to be self-reliant. It's not usually possible to wait for someone to reboot them if there are so me component wrong. Some system designs, such as space probes, are simply not accessible to human operators. If t he system ever hangs, such systems are perm anently disabled. In other cases ...

  • Lanner electronic FW-7870 - page 46

    = 0 Disable = 1 Enable Bit 1-0 : Reserved CRF6 (Defaul t 0x00) Watch Dog Timer Time-out valu e. Writing a non-zer o value to th is register causes the counter toload the value to Watch Dog Counter and start coun ting down. If the Bit 7 and Bit 6 are set, anyMouse Interrupt or Keyboard Interrupt ev ent will also cause the reload of previou sly-loade ...

  • Lanner electronic FW-7870 - page 47

    A p p e n d i x C Console Redirection Console redirection allows you to maintain a system from a remote location by re-directing keyboard input and text output through the serial port. T his section will tell you how to use console redirection. 1. Please insert console cable between on FW -7870 and Remote Client System. 2. Setup BIOS in FW -7870. B ...

  • Lanner electronic FW-7870 - page 48

    A p p e n d i x D LCD Module and Key Pad For FW-7870 Purpose The purpose of this document is to provide insta llation inform ation for the LCD module and key pad installed in the FW -7870. Specification overview The LCD module is designed to provide real-time opera ting status and configuration information for the system. Y ou can reference the doc ...

  • Lanner electronic FW-7870 - page 49

    2.Read_KeyPad(); =>This Function get the KeyPad number if user pressed key . =>Direct write function to your program. Ex. int a; a=Read_KeyPad(); Return V alue: "1"=>The Upper Key "2"=>The Down Key "3"=>The Enter Key "4"=>The ESC Key 3.Show_Data(int Dp_T yp e1,int Dp_T ype2,int Dp_T ype3,int ...

  • Lanner electronic FW-7870 - page 50

    Terms and Conditions Date:2004. 07.08 W arranty Policy 1. All products are warranted a gainst defects in materials and workmanship f or a period of two years from the date of your purchase. 2. The buyer will bear the return freigh t charges for goods return ed for repair within the warran ty period; whereas manufacturer will bear the after se rvice ...

  • Lanner electronic FW-7870 - page 51

    RMA Service Request Form When requesting RMA service, please fill out this RMA Service Request Form . W ithout this form your RMA will be REJECTED!!! RMA No: Reasons to Return: □ Rep air(Please include failu re details) □ T esting Purpose Company: Contact Person: Phone No. Purchased Date: Fax No.: Applied Date: Return Shipping Address: Shipping ...

  • Lanner electronic FW-7870 - page 52

    PEXNSD01-040709 V ersion 1.0 Printed and published in T aiwan ...

Manufacturer Lanner electronic Category Network Hardware

Documents that we receive from a manufacturer of a Lanner electronic FW-7870 can be divided into several groups. They are, among others:
- Lanner electronic technical drawings
- FW-7870 manuals
- Lanner electronic product data sheets
- information booklets
- or energy labels Lanner electronic FW-7870
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lanner electronic FW-7870.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lanner electronic FW-7870, service manual, brief instructions and user manuals Lanner electronic FW-7870. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lanner electronic FW-7870.

Similar manuals

A complete manual for the device Lanner electronic FW-7870, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lanner electronic FW-7870 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lanner electronic FW-7870.

A complete Lanner electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lanner electronic FW-7870 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lanner electronic FW-7870, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lanner electronic FW-7870, that we can find in the current document
3. Tips how to use the basic functions of the device Lanner electronic FW-7870 - which should help us in our first steps of using Lanner electronic FW-7870
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lanner electronic FW-7870
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lanner electronic FW-7870 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lanner electronic FW-7870?

Use the form below

If you did not solve your problem by using a manual Lanner electronic FW-7870, ask a question using the form below. If a user had a similar problem with Lanner electronic FW-7870 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)