English dropdown-ico

Manual Henny Penny EEG-141

72 pages 2.69 mb
Download

Go to site of 72

Summary
  • Henny Penny EEG-141 - page 1

    OPERA T OR’S MANUAL REGISTER W ARRANTY ONLINE A T WWW .HENNYPENNY .COM Henny Penny Evolution Elite ™ Reduced Oil Cap acity Open Fryers (S plit V at & Full V at– Gas ) Model EEG-141 Model EEG-142 Model EEG-143 Model EEG-144 ...

  • Henny Penny EEG-141 - page 2

    ...

  • Henny Penny EEG-141 - page 3

    Model EEG-141, 142, 143, 144 To avoid a fire, ke ep appliance area f ree and clear from combust ibles. Improper installat ion, adjustment, al terati on, se rvi c e, or maintenan ce can cause prop erty damage, injury , or death. R ead the instal lation, operatin g, and maintenan ce instruc t ions th oroughl y before instal ling or serv ici ng th is ...

  • Henny Penny EEG-141 - page 4

    Model EEG-141, 142, 143, 144 T echnical Data for CE Marked Products Nominal Heat Input: Natural (I2H) = 19,8, kW (67,560 Btu/h) (Net) Natural (I2E) = 19.8 kW (67,560 Btu/h) Natural (I2E+) = 19.8 kW (67,560 Btu/h) Natural (I2L) = 19.8 kW (67,560 Btu/h) Natural (I2HS) = 19.8 kW (67,560 Btu/h) Liquid Propane (I3P) = 19,8, kW (67,560 Btu/h) Nominal Hea ...

  • Henny Penny EEG-141 - page 5

    LIMITED W ARRANTY FOR HENNY PENNY EQUIPMENT Subject to the following conditions, Henny Penny Corporation makes the following limited warranties to the original purchaser only for Henny Penny appliances and replacement parts: NEW EQUIPMENT : Any part of a new appliance, except baskets, lamps, and fuses, which proves to be defective in material or wo ...

  • Henny Penny EEG-141 - page 6

    Model EEG-141, 142, 143, 144 T ABLE OF CONTENTS Section Page Section 1. INTRODUCTION .................................................................................................... 1- 1 1-1 Introduction .................................................................................................... 1- 1 1 -2 Features ...................... ...

  • Henny Penny EEG-141 - page 7

    Model EEG-141, 142, 143, 144 T ABLE OF CONTENTS (Continued) Section Page Section 4. LEVEL 1 PROGRAMMING ........................................................................... 4 - 1 4-1 Modifying Product Settings .................................................................... 4 - 1 4 - 2 AIF Clock .......................................... ...

  • Henny Penny EEG-141 - page 8

    ...

  • Henny Penny EEG-141 - page 9

    Model EEG-141, 142, 143, 144 1-1. INTRODUCTION The Henny Penny open fryer is a basic unit of food processing equipment designed to cook foods better and easier . The micro computer-based design helps make this possible. This unit is used only in institutional and commercial food service operations, and operated by qualified personnel. • As of Aug ...

  • Henny Penny EEG-141 - page 10

    Model EEG-141, 142, 143, 144 1-4. ASSIST ANCE Should you require outside assistance, call your local independent distributor in your area, or call Henny Penny Corp. at 1-800-417-8405 or 1-937-456-8405. 1-5. SAFETY The Henny Penny open fryer has many safety features incorporated. However , the only way to ensure a safe operation is to fully under- s ...

  • Henny Penny EEG-141 - page 11

    Model EEG-141, 142, 143, 144 1-5. SAFETY (Continued) Equipotential Ground Symbol W aste Electrical and Electronic Equipment (WEEE) Symbol Shock Hazard Symbols Hot Surface Symbols OR OR 6 0 9 1 -3 ...

  • Henny Penny EEG-141 - page 12

    ...

  • Henny Penny EEG-141 - page 13

    Model EEG-141, 142, 143, 144 SECTION 2. INST ALLA TION This section provides the installation and unpacking instructions for the Henny Penny Evolution Elite fryer . Installation of this unit should be performed only by a qualified service technician. Do not puncture the fryer with any objects such as drills or screws as component damage or electric ...

  • Henny Penny EEG-141 - page 14

    The proper location of the fryer is very important for operation, speed, and convenience. The location of the open fryer should allow clearances for servicing and proper operation. Choose a location which will provide easy loading and unloading without interfering with the final assembly of food orders. Operators have found that frying from raw to ...

  • Henny Penny EEG-141 - page 15

    Model EEG-141, 142, 143, 144 The fryer should be located with provision for venting into an adequate exhaust hood or ventilation system. This is essential to permit efficient removal of the steam exhaust and frying odors. Special precaution must be taken in designing an exhaust canopy to avoid interference with the operation of the fryer . W e reco ...

  • Henny Penny EEG-141 - page 16

    Model EEG-141, 142, 143, 144 2-6. GAS SUPPL Y (Continued) • The fryer and its manual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 PSIG (3.45 kPa) (34.5 mbar). • The fryer must be isolated from the gas supply piping system by closing its individ ...

  • Henny Penny EEG-141 - page 17

    Model EEG-141, 142, 143, 144 609 2-5 2-6. GAS SUPPL Y (Continued) ...

  • Henny Penny EEG-141 - page 18

    Model EEG-141, 142, 143, 144 2-7. GAS LEAK TEST 2-8. GAS PRESSURE REGULA T OR SETTING 2-9. ELECTRICAL REQUIREMENTS Prior to turning the gas supply on, be sure the gas valve knob on the gas control valve is in the off position. Upon initial installation, and after moving the unit, the piping and fittings should be checked for gas leaks. A simple che ...

  • Henny Penny EEG-141 - page 19

    Model EEG-141, 142, 143, 144 2-9. ELECTRICAL REQUIREMENTS (Continued) T o avoid electrical shock, do not disconnect the ground (earth) plug. This fryer must be adequately and safely grounded (earthed). Refer to local electrical codes for correct grounding (earthing) procedures or in absence of local codes, with The National Electrical Code, ANSI/NF ...

  • Henny Penny EEG-141 - page 20

    Model EEG-141, 142, 143, 144 2-12. DIMENSIONS 2-8 510 ...

  • Henny Penny EEG-141 - page 21

    ...

  • Henny Penny EEG-141 - page 22

    Model EEG-141, 142, 143, 144 Figure 3-1 3-1 1009 SECTION 3. OPERA TION 3-1. OPERA TING COMPONENTS Refer to explanations on the next pages. 12 6 45 7 38 9 13 11 12 14 10 Figure 3-2 15 16 17 Figure 3-3 Figure 3-4 (Bulk Oil Supply Fryers Only) ...

  • Henny Penny EEG-141 - page 23

    Model EEG-141, 142, 143, 144 809 3-2 Fig. Item Description Function No. No. 3 - 1 1 This LED lights when the control calls for heat for the left vat(s), and the burners ignite and heat the oil 3 - 1 2 During normal operation, press this button to start and stop cook cycles for the left basket; press to change displayed product; also used for √ ? ...

  • Henny Penny EEG-141 - page 24

    Model EEG-141, 142, 143, 144 3-3 1009 3-1. OPERA TING COMPONENTS (Continued) Fig. Item Description Function No. No. 3 - 1 9 Press to turn on and off the heat system for the left vat(s); on full vats either button can be used 3 - 1 10 & 11 Each product button LED lights when that particular product has been selected, or when it is compatible wit ...

  • Henny Penny EEG-141 - page 25

    Model EEG-141, 142, 143, 144 Fig. Item Description Function No. No. 3 - 4 1 Filter Drain Pan Assy . Oil is drained into this pan and then is pumped through filters to help prolong the use of the oil 3 - 4 2 Drain V alve Knob Pull-out on black knobs to open drain valve and oil drains from vat; Push-in to close drain valve and oil can be pumped into ...

  • Henny Penny EEG-141 - page 26

    Model EEG-141, 142, 143, 144 3-5 809 3-2. SET -UP MODE Upon initial start-up, the controls will ask to confirm the settings for the fryer . When the main power switch is turned on, “OFF” shows in both displays. Press on either side and *SETUP* *ENTER CODE* shows in the displays. Press 1, 2, 3, and “LANGUAGE” shows on the left display , “E ...

  • Henny Penny EEG-141 - page 27

    Model EEG-141, 142, 143, 144 3-3. FILLING OR ADDING OIL The oil level must always be above the burner tubes when the fryer is heating and at the oil level indicators on the r ear of the vat. Failure to follow these instructions could r esult in a fire and/or damage to the fryer . Solid oil is not r ecommended. Solid oil could cause clogging and pum ...

  • Henny Penny EEG-141 - page 28

    Model EEG-141, 142, 143, 144 1. Make sure basket support is in vat and vat is filled with oil to the proper level. Model EEG-141, fill the oil reservoir . See Section 3-10. 2. Move power switch to the ON position and then press to turn on heat for the desired vat. If display shows “IS POT FILLED?” make sure oil is at the proper level (see Secti ...

  • Henny Penny EEG-141 - page 29

    Model EEG-141, 142, 143, 144 809 3-8 3-5. BASIC OPERA TION 1. Once out of the Melt Cycle, LOW TEMP flashes until the set- point temperature has been reached. Once the set-point temperature has been reached, the product name now shows in the display , ex: FR Y , and product now can be placed in the oil. 2. Press a timer button or . 3. Display shows ...

  • Henny Penny EEG-141 - page 30

    Model EEG-141, 142, 143, 144 3-9 510 During normal operation, the control automatically monitors the oil level in the vat. If the control senses the oil level too low , the unit automatically pumps oil from the JIB into the vat to keep the oil at the proper level. Manual T op-Off If the oil level is a little low , oil can be added to the vat at any ...

  • Henny Penny EEG-141 - page 31

    Model EEG-141, 142, 143, 144 Filling Oil Reservoir 1. Control displays “JIB IS LOW” and an alarm sounds. 2. Open door and pull reservoir forward and remove reservoir cover . Figure 1. 3. Place on bracket on door . Figure 2. 4. Pour oil into reservoir upto the fill lines (13 lbs. (6.12 kg.)) and then replace cover and push reservoir back into po ...

  • Henny Penny EEG-141 - page 32

    Model EEG-141, 142, 143, 144 3-1 1. SMAR TFIL TER EXPRESS ™ 1 . During normal operation and after a certain number of cook cycles, the Filter Beacon ® illuminates on the front of the fryer (Figure 1), and the control periodically shows “FL TR NOW?” “YES NO”. If X for NO is pressed, fryer resumes normal operation and control suggests filt ...

  • Henny Penny EEG-141 - page 33

    Model EEG-141, 142, 143, 144 6. If the oil has not pumped back to the proper level in the vat during the SmartFilter Express™ process, press X button for NO and pump runs for another 30 seconds. 7. Display shows “IS POT FILLED?” “YES NO”. Make sure vat is full and then press √ √ √ √ √ button and display shows and the control ret ...

  • Henny Penny EEG-141 - page 34

    Model EEG-141, 142, 143, 144 3-13 809 This filtering procedure allows for a more thorough cleaning of the vat and should be done once a day . The vat can be filtered during any non-frying times. T o avoid burns fr om hot oil, use approved safety equip- ment including, apron, face shield and gloves before starting filtering procedure. Also, to avoid ...

  • Henny Penny EEG-141 - page 35

    Model EEG-141, 142, 143, 144 809 3-14 7. Scrape or brush the sides and the bottom of the vat. Be careful not to damage the sensing probes. Do not use steel wool, other abrasive cleaners or cleaners/ sanitizers containing chlorine, br omine, iodine or ammonia chemicals, as these will deteriorate the stainless steel material and shorten the life of t ...

  • Henny Penny EEG-141 - page 36

    Model EEG-141, 142, 143, 144 3-15 809 3-13. DISCARDING OIL FROM V A T USING OPTIONAL OIL DISCARD SHUTTLE WITH PROLONGED USE, THE FLASHPOINT OF OIL IS REDUCED. DISCARD OIL IF IT SHOWS SIGNS OF EXCESSIVE SMOKING OR FOAMING . SERIOUS BURNS, PERSONAL INJURY , FIRE, AND/ OR PROPER TY DAMAGE COULD RESUL T . 1. Open the door , lift-up on the drain pan sto ...

  • Henny Penny EEG-141 - page 37

    Model EEG-141, 142, 143, 144 Figure 1 Figure 2 3-14. DISCARDING OIL FROM V A T USING OPTIONAL BULK OIL DISPOSE SYSTEM 1009 3-16 1. Connect the female quick disconnect, that is attached to the hose in the rear of the open fryer , to the correct male quick disconnect at the wall. Once attached, the hose can remain connected unless the open fryer is m ...

  • Henny Penny EEG-141 - page 38

    Model EEG-141, 142, 143, 144 3-15. CHANGING THE FIL TER P AD In order to assure good oil pumping performance, the filter pad (or paper) should be changed at least once per day . If the filter pad has not been changed, a reminder shows on the display , “CHANGE P AD”. Press √ √ √ √ √ button to cancel the message, but it reappears every ...

  • Henny Penny EEG-141 - page 39

    Model EEG-141, 142, 143, 144 3-15. CHANGING THE FIL TER P AD (Continued) 5 . Remove the filter pad retaining ring and clean thoroughly with soap and water . Rinse thoroughly with hot water . Figure 5. 6. Pull the filter pad from the pan and discard pad. Figure 6. 7. Remove the bottom screen from pan and clean thoroughly with soap and water . Rinse ...

  • Henny Penny EEG-141 - page 40

    Model EEG-141, 142, 143, 144 3-15. CHANGING THE FIL TER P AD (Continued) Be sure that the drain pan, bottom screen, crumb catcher , and the retaining ring are thoroughly dry before placing filter pad into pan as water will dissolve the filter pad. 9. Reassemble in reverse order , placing the bottom screen into the filter pan first, followed by the ...

  • Henny Penny EEG-141 - page 41

    Model EEG-141, 142, 143, 144 609 3-20 3-17. CLEAN-OUT MODE The filter drain pan must be as far back under fryer as it will go, and the cover in place. Be sure the filter drain pan is latched into place and the hole in the cover lines up with the drain before opening the drain. Failure to follow these instructions causes splashing of shortening and ...

  • Henny Penny EEG-141 - page 42

    Model EEG-141, 142, 143, 144 3-21 609 Display shows “IS DISPOSAL UNIT IN PLACE?” “YES NO”. If “NO” is selected, display shows “INSER T DISPOSAL UNIT”. Once disposal unit is in place press √ √ √ √ √ button for YES, open drain, and display shows “DRAINING” and oil drains from vat. Display then shows “V A T EMTY”, “ ...

  • Henny Penny EEG-141 - page 43

    Model EEG-141, 142, 143, 144 609 3-22 1 1. Return empty filter drain pan to fryer and press √ √ √ √ √ button. Display then shows “V A T EMTY” “YES NO”. 12 . Once vat is empty , press √ √ √ √ √ button and display shows “SCRUB V A T COMPLETE” “YES NO”. Use brush and scour pad to clean vat, if needed. Do not use ste ...

  • Henny Penny EEG-141 - page 44

    Model EEG-141, 142, 143, 144 3-23 609 3-18. CHECK/REPLACE FIL TER DRAIN PAN O-RINGS T o prevent oil leaking, and to keep filtering process operating properly , the filter drain pan o-rings should be inspected for nicks and tears at least every 3 months. Figure 1 1. Open the door , lift-up on the drain pan stop and pull-out the filter drain pan asse ...

  • Henny Penny EEG-141 - page 45

    Model EEG-141, 142, 143, 144 609 3-24 3-19. INFO BUTT ON ST A T S Actual Oil T emperature 1. Press and the actual oil temperature shows in the display , for each vat. Set-point T emperature 2. Press twice and SP shows in the display , along with the set-point (preset) temperature of each vat. Recovery Information for each V at 3. Press 3 times and ...

  • Henny Penny EEG-141 - page 46

    Model EEG-141, 142, 143, 144 3-25 609 As in all food service equipment, the Henny Penny open fryer does require care and proper maintenance. The table below provides a summary of scheduled maintenance procedures to be performed by the operator . Procedure Frequency Filtering of shortening Daily (Section 3-1 1) Changing the filter pad Daily (Section ...

  • Henny Penny EEG-141 - page 47

    Model EEG-141, 142, 143, 144 T o ensure proper burner operation, clean the blowers and blower vents twice a year . 1. Press the main power switch to the OFF posistion. 2. Unplug power cord and turn the gas shut-off handle clockwise to turn off the gas, and then disconnect the gas line. 3 . Disconnect cable restraint and then carefully roll the frye ...

  • Henny Penny EEG-141 - page 48

    ...

  • Henny Penny EEG-141 - page 49

    Model EEG-141, 142, 143, 144 609 4-1 SECTION 4. INFORMA TION MODE This historic information can be recorded and used for operational and technical help and allows you to view the following: • 1. E-LOG • 2. LAST LOAD • 3. DAIL Y ST A T S • 4. OIL ST A TS • 5. REVIEW USAGE • 6. INPUTS • 7. OUTPUTS • 8. OIL TEMP Not all Information Mod ...

  • Henny Penny EEG-141 - page 50

    Model EEG-141, 142, 143, 144 4-2 609 2. LAST LOAD (Information on recent cook cycles) Press and “2. LAST LOAD” show in displays. Press a timer button or for the product you want to view the cook data and the LED flashes. Press button to start viewing the cook data. For example, if the left LED is flashing, “PRODUCT FR Y L1” show in displays ...

  • Henny Penny EEG-141 - page 51

    Model EEG-141, 142, 143, 144 609 4-3 4-1. INFORMA TION MODE DET AILS (Continued) 3. DAIL Y ST A TS (Operational info of fryer for last 7 days) Press and “3. DAIL Y ST A TS” show in displays. Press button to start viewing the cook data. Press the right t o view data for other days of week. Day this data was recorded for APR-30 TUE* Number of Hou ...

  • Henny Penny EEG-141 - page 52

    Model EEG-141, 142, 143, 144 4-4 609 Start date of new oil (L/R) NEW OIL MAR-23 Number of days oil in use (L/R) OIL USE 4 DA YS Number of filters on this oil (L/R) FIL TERED 4 Number of times filter skipped (L/R) SKIPPED 0 Number of cook cycles on this oil (L/R) TOT CK 3 8 A verage number of days per oil change (L/R) A VG DA YS PER OIL CHANGE 13.8 ...

  • Henny Penny EEG-141 - page 53

    Model EEG-141, 142, 143, 144 609 4-5 Day the usage data was previously reset SINCE APR-19 3:00P Number of Hours the fryer was on (L/R) ON HRS 4 Number of times filtered (L/R) FIL TERED 4 Number of times filter skipped (L/R) SKIPPED 0 Number of times oil added (L/R) ADD OIL 4 Number of times oil discarded (L/R) DISPOSE 1 T otal number of cook cycles ...

  • Henny Penny EEG-141 - page 54

    Model EEG-141, 142, 143, 144 5-1 609 This mode allows you to program the following: 1. Press and hold button until “PROG” shows in the display , followed by “ENTER CODE”. 2. Enter code 1, 2, 3 (first 3 product buttons). “PRODUCT” an d “PROGRAM” show in the displays, followed by “SELECT PRODUCT’ and “-P 1-” (ex: NUG). Change ...

  • Henny Penny EEG-141 - page 55

    Model EEG-141, 142, 143, 144 T o Change Times and T emperatur es 7. Press button until “COOK TIME” shows in the display , and then use the product buttons, or the an d buttons, to change the time in minutes and seconds, to a maximum of 59:59. 8. Press button and “TEMP” shows in the display , along with the preset temperature on the right si ...

  • Henny Penny EEG-141 - page 56

    Model EEG-141, 142, 143, 144 Mixed Filter T racking Filter After X Number of Loads 13b. Press button until “FIL TER AFTER...” flashes in the left display along, and the number of cook cycles between filters shows in the right display . Press the product buttons, or the and buttons, to change this value of 0 to 99 loads. This needs set for each ...

  • Henny Penny EEG-141 - page 57

    Model EEG-141, 142, 143, 144 1009 6-1 SECTION 6. LEVEL 2 PROGRAMMING The Special Program Mode is used to set more detailed programming, such as: SP-1 • Degrees Fahrenheit or Celsius SP-2 • Language: English, Russian, Swedish (SVENSKT), German (DEUTSCHE), Portuguese, Spanish (ESP ANOL) and French (FRANCAIS) SP-3 • System Initialization (Factor ...

  • Henny Penny EEG-141 - page 58

    Model EEG-141, 142, 143, 144 Press and hold the button for 5 seconds until “LEVEL 2” followed by , “SP PROG” and “ENTER CODE” show in the display . Enter code 1,2,3, and “SP-1”, “TEMP”, “FORMA T” show in the displays. If a bad code is entered, a tone sounds and “BAD CODE” shows on the display . W ait a few seconds, the c ...

  • Henny Penny EEG-141 - page 59

    Model EEG-141, 142, 143, 144 Audio T one (SP-5) Press button and “SP-5” and “TONE” flash in the left display . Press the or , or use product buttons, to adjust the tone of the speaker , 2000 being the maximum value and 50 the minimum. Liquid or Solid Cooking Oil Used (SP-6) Press button until “SP-6 MEL T CYCLE SELECT” scrolls in the lef ...

  • Henny Penny EEG-141 - page 60

    Model EEG-141, 142, 143, 144 Filter T racking Mode (SP-8) Filter T racking signals the operator when the oil needs filtering by counting the number Cook Cycles between filters Press button and “SP-8” and “FIL TER TRACKING MODE” show in the display . Use the and buttons to choose either “1.MIXED” filter tracking or “2.GLOBAL”. GLOBAL ...

  • Henny Penny EEG-141 - page 61

    Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Filter T racking Mode (SP-8) (Continued) GLOBAL If GLOBAL is selected, press button. Split V at If unit is a split vat, “SP-8A” and “LEFT V A T FIL TER CYCLES” shows in the left display , and the number of cook cycles between filters shows on the right display (0 to 99). Use ...

  • Henny Penny EEG-141 - page 62

    Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Polish Duration (SP-9) Press button and “SP-9 POLISH TIME” flashes in the left display . Press the or , or use product buttons, to change the polish time, from 0 to 10 minutes. Change Filter Pad Reminder Time (SP-10) Press button and “SP-10 CHANGE P AD’ REMINDER” flashes i ...

  • Henny Penny EEG-141 - page 63

    Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) 2nd Language (SP-16) Press button and “SP-16 2ND LANGUAGE” flashes on the left display . Press the or buttons to select the desired 2nd language. By setting a 2nd language in the controls, 2 languages can now be chosen by pressing button during normal operation. One language sho ...

  • Henny Penny EEG-141 - page 64

    Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Autolift Enabled (SP-21) Press button and “SP-21 AUTOLIFT ENABLED?” flashes in the left display . Press the or buttons to choose “YES LIFT” or “NO LIFT”. If fryer is fitted with the auto-lift option, SP-21 must be set to “YES LIFT”, otherwise, set SP-21 to “NO LIFT ...

  • Henny Penny EEG-141 - page 65

    Model EEG-141, 142, 143, 144 Program Code Change (SP-25) (Continued) If satisfied with code, press and “*CODE CHANGED*” shows in display . If not satisfied with code, press and “*CANCEL” shows in display , then reverts back to “SP-25” and “CHANGE, MGR CODE? 1=YES”. Now the above steps can be repeated. Usage Code Change (SP-26) This ...

  • Henny Penny EEG-141 - page 66

    Model EEG-141, 142, 143, 144 6-2. CLOCK SET 1. Press and hold the button for 5 seconds until “LEVEL 2”, followed by , “SP PROG” and “ENTER CODE” show in the display . 2. Press the button again and “CLK SET” and “ENTER CODE” flash in the left display . 3. Enter code 1, 2, 3 (first 3 product buttons). 4. “CS-1 ENTER DA TE MM-DD- ...

  • Henny Penny EEG-141 - page 67

    Model EEG-141, 142, 143, 144 SECTION 7. TROUBLESHOOTING 7-1. TROUBLE SHOOTING GUIDE Problem Cause Correction POWER switch ON but fryer completely inoperative Control error code “E-10” V at is under-filled • Open circuit • Oil temperature too high • JIB is low or empty • JIB oil line is clogged or collapsed • Filter pan needs cleaned ? ...

  • Henny Penny EEG-141 - page 68

    Model EEG-141, 142, 143, 144 7-1. TROUBLE SHOOTING GUIDE (Continued) Oil foaming or boiling over top of vat Oil will not drain from vat Filter motor runs but pumps oil slowly Bubbles in oil during entire filtering process Filter motor will not run Problem Cause Correction • W ater in oil • Improper or bad oil • Improper filtering • Improper ...

  • Henny Penny EEG-141 - page 69

    Model EEG-141, 142, 143, 144 7-2. ERROR CODES In the event of a control system failure, the digital display shows an error message. The message codes are shown in the DISPLA Y column below . A constant tone is heard when an error code is displayed, and to silence this tone, press any button. DISPLA Y CAUSE CORRECTION “E-4” • Control board • ...

  • Henny Penny EEG-141 - page 70

    Model EEG-141, 142, 143, 144 7-2. ERROR CODES “E-20-A” • Pressure Switch • If fan is not running, have pressure switch checked; should be “F AN SENSOR failure open circuit if no air pressure STUCK • wiring problem • If fan is running, wiring error , or relay on I/O board closed CLOSED” • I/O board failure “E-20-B” • Pressure ...

  • Henny Penny EEG-141 - page 71

    ...

  • Henny Penny EEG-141 - page 72

    *FM05-057-  * Henny Penny Corp., Eaton, Ohio 45320, Revised 5-28-10 Henny Penny Corporation P .O.Box 60 Eaton,OH 45320 1-937-456-8400 1-937-456-8402 Fax T oll free in USA 1-800-417-8417 1-800-417-8434 Fax w w w.hennypenny .com ...

Manufacturer Henny Penny Category Fryer

Documents that we receive from a manufacturer of a Henny Penny EEG-141 can be divided into several groups. They are, among others:
- Henny Penny technical drawings
- EEG-141 manuals
- Henny Penny product data sheets
- information booklets
- or energy labels Henny Penny EEG-141
All of them are important, but the most important information from the point of view of use of the device are in the user manual Henny Penny EEG-141.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Henny Penny EEG-141, service manual, brief instructions and user manuals Henny Penny EEG-141. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Henny Penny EEG-141.

Similar manuals

A complete manual for the device Henny Penny EEG-141, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Henny Penny EEG-141 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Henny Penny EEG-141.

A complete Henny Penny manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Henny Penny EEG-141 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Henny Penny EEG-141, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Henny Penny EEG-141, that we can find in the current document
3. Tips how to use the basic functions of the device Henny Penny EEG-141 - which should help us in our first steps of using Henny Penny EEG-141
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Henny Penny EEG-141
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Henny Penny EEG-141 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Henny Penny EEG-141?

Use the form below

If you did not solve your problem by using a manual Henny Penny EEG-141, ask a question using the form below. If a user had a similar problem with Henny Penny EEG-141 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)