Manual Pentax EN-1

15 pages 0.89 mb
Download

Go to site of 15

Summary
  • Pentax EN-1 - page 1

    EN-1 GETTING TO KNOW YOUR CAMERA Front View Name Description Self-timer LED Blinks green during Self-timer mode until picture is taken. Viewfinder Allows you to frame the subject of the picture. Flash Provides flash illumination. Shutter release Focuses and locks the exposure of the camera button when pressed halfway down, and takes the picture whe ...

  • Pentax EN-1 - page 2

    EN-2 Re ar View Name Description Viewfinder Allows you to frame the subject of the picture. Viewfinder LED Displays the camera current state. Diopter adjustment Provides a clearer image when using the dial viewfinder. / button Zooms the lens to telephoto position. During zoom playback, it changes the size of the Zoom Display image displayed on the ...

  • Pentax EN-1 - page 3

    EN-3 LCD monitor Provides menu information to operate the camera, and previews the picture before taking it and review it afterwards. Four-way controller Allows you to scroll through menus and pictures, and then select choices. ( e ) - Selects the flash mode in Capture mode. ( f )- Selects the self-timer mode in Capture mode. ( S )- Selects the foc ...

  • Pentax EN-1 - page 4

    EN-4 Attach the camera strap as shown in the illustration. Inserting the Battery 1 . Open the battery/card cover. 2 . Insert the battery in the correct orientation as shown on the right. 3 . Close the battery/card cover. Atta ching the Ca mera Stra p GETTING ST ARTED • You can use 2 AA size batteries (alkaline or Ni-MH rechargeable) to power the ...

  • Pentax EN-1 - page 5

    EN-5 Inserting the SD Me mory Card (Option al Acce ssory) 1. Open the battery/card cover. 2 . Insert the SD memory card in the correct orientation as shown on the right. J Hold the SD memory card with its metal contact end surface facing the rear side of the camera, and then insert the card as far as it can go. 3. Close the battery/card cover. T ur ...

  • Pentax EN-1 - page 6

    EN-6 Choosing the OSD (On-Screen Display) La nguage 1. Set the mode dial to . 2 . Use the four-way controller ( d ) to select [Language] and press the button. 3. Use the four-way controller ( cd ) to select the language. 4. Press the button to confirm the language selection. Set-up2 Set-up3 Set-up1 Language OK : Sound Date Adjust Format English Off ...

  • Pentax EN-1 - page 7

    EN-7 Setting the Date a nd Tim e 1. Set the mode dial to . 2. Select [Date Adjust] with the four-way controller ( d ). 3. Use the four-way controller ( ef ) to select the date type. 4. Press the button. J The Date Adjust screen appears. 5. Use the four-way controller ( ef ) to select item’s field and adjust the value for the date and time with th ...

  • Pentax EN-1 - page 8

    EN-8 T a king Still Pictures 1. Press the button to turn on the camera. 2. Set the mode dial to . 3. Compose your image in the LCD monitor or through the viewfinder. 4. Press the shutter release button halfway down to automatically focus the image. Proper exposure is determined and locked at the same time. 5. Press the shutter release button down f ...

  • Pentax EN-1 - page 9

    EN-9 Recording Movie Clips This mode allows you to record movie clips with sound via built-in microphone. 1. Rotate the mode dial to and turn your camera on by pressing the button. 2 . Press the shutter button to start recording. 3. To stop recording, press the shutter button again. 1 DISPLAY PENTAX Playing Ba ck Movie Clips You can play back the r ...

  • Pentax EN-1 - page 10

    EN-10 Era sing Image s 1. Press the button. J The last image will be displayed on the screen. 2 . Select the image you want to erase with the four-way controller ( ef ). 3. Press the button. 4. Use the four-way controller ( cd ) to select [This Image]. 5. Press the button. 6. Use the four-way controller ( cd ) to select [OK]. 7 . Press the button t ...

  • Pentax EN-1 - page 11

    EN-11 TRANSFERRING RECOR DED IMAGES AND MOVIES TO YOUR COMPUTER Setting Up Y our Digital Ca mera After installing the necessary software on your computer, you must now set up your digital camera to transfer images from the camera to your computer. The USB driver included in the CD-ROM (S-SW38) is exclusively for Windows 98/98SE. For more details on ...

  • Pentax EN-1 - page 12

    EN-12 Connecting the Ca mera to Y our Computer 1. Connect the camera to the PC with the USB cable. If there is no SD Memory Card in the camera, the images stored in the internal memory will be transmitted to the computer. 2. Turn the camera on. 3. Look for a new “Removable Disk” icon appearing in the “My Computer” window. Your recorded imag ...

  • Pentax EN-1 - page 13

    EN-13 Downloading Image s/Movie Clips When the camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “removable disk” (“untitled” disk on a Macintosh) to your computer hard drive. J For Computers Running Windows Open ...

  • Pentax EN-1 - page 14

    EN-14 USING THE DIGIT AL CAMERA AS A PC CAMERA Your digital camera can act as a PC camera, which allows you to videoconference , or have a real-time conversation with friends or family. 1. Install the PC camera driver. The PC-camera driver included in the CD-ROM (S-SW38) is exclusively for Windows. The PC camera function is not supported for Mac pl ...

  • Pentax EN-1 - page 15

    EN-15 T o use W indows NetMeeting for videoconferencing 1 . Go to Start=>Programs=>Accessories=>Communications => NetMeeting to launch the NetMeeting program. 2. Click the Start Video button to view live video. 3. Click the Place Call button. 4. Type the e-mail address or the network address of the computer that you are calling. 5. Clic ...

Manufacturer Pentax Category Digital Camera

Documents that we receive from a manufacturer of a Pentax EN-1 can be divided into several groups. They are, among others:
- Pentax technical drawings
- EN-1 manuals
- Pentax product data sheets
- information booklets
- or energy labels Pentax EN-1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pentax EN-1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pentax EN-1, service manual, brief instructions and user manuals Pentax EN-1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pentax EN-1.

Similar manuals

A complete manual for the device Pentax EN-1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pentax EN-1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pentax EN-1.

A complete Pentax manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pentax EN-1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pentax EN-1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pentax EN-1, that we can find in the current document
3. Tips how to use the basic functions of the device Pentax EN-1 - which should help us in our first steps of using Pentax EN-1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pentax EN-1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pentax EN-1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pentax EN-1?

Use the form below

If you did not solve your problem by using a manual Pentax EN-1, ask a question using the form below. If a user had a similar problem with Pentax EN-1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)