Manual Baumatic STD6.1

20 pages 0.65 mb
Download

Go to site of 20

Summary
  • Baumatic STD6.1 - page 1

    STD6.1 Cooker Hood ...

  • Baumatic STD6.1 - page 2

    1 User Manual for your Baumatic STD6.1 Cooker Hood 11/07/05 NOTE : This User Instruction Man ual contains imp ortant information, including safety & installation points, w hich will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available fo r future reference. ...

  • Baumatic STD6.1 - page 3

    2 YOUR COOKER HOOD’S SPECIFICATIONS ….……………..………….3 IMPORTANT SAFETY INFO RMATION……………………………….…4-5 ENVIRONMENTAL NO TE ………….…………………………………………6 USING YOUR COOKER HOOD………………………………..……………..7 MAINTAINING AND CLEANING YOUR COOKER HOOD ...

  • Baumatic STD6.1 - page 4

    3 Congratulations on purchasing a Baumatic Cooker Hood! To fully enjoy using your app liance long into the future, please firstly familiarise yours elf with its specifications, safety advice and operational in structions included in this manual. You will also need this manual to ensure that your Cooker Hood has been installed properly. Your cooker ...

  • Baumatic STD6.1 - page 5

    4 o Any installation work must be carried out by a qualified electrician or competent person. o The hood must be installed in accordance with the installation instructions and all measurements followed. o If the cooker hood is installed for use above a gas appliance then the provision for ventilation must be in accordance with the Gas Safety Codes ...

  • Baumatic STD6.1 - page 6

    5 o Ensure the ducting for the extractor function has the same diameter as the outlet hole all the way through. o Keep young children from using, playing with or tampering with the cooker hood. Older children and infirm persons should be supervised if they are using the cooker hood. o Your cooker hood is for domestic use only. o Please dispose of t ...

  • Baumatic STD6.1 - page 7

    6 Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be under taken by a competent person. CONFORMITY TO W.E.E.E. DIRECTIVE Environmental Note ...

  • Baumatic STD6.1 - page 8

    7 To use your cooker hood: 1) Make sure it has been properly installed. 2) Find the CONTROL PANEL. It is located on the hood’s front surface near the upper right corner of the unit. 3) The CONTROL PANEL contains switches as shown in the Figure below. These perform separate functions. You will need to understand what both switches do before you at ...

  • Baumatic STD6.1 - page 9

    8 * IMPORTANT! : Before cleaning, always ensure that you have switched your cooker hood OFF at the omni-polar switch, set at the wall from t he cable: Cleaning  Clean the external p arts with mild liquid deterg ents on a damp cloth.  Never use abrasive powder, corrosive solvents or brushes.  Never insert pointed objects into the motor’s pro ...

  • Baumatic STD6.1 - page 10

    9 First remove the anti- grease filter by sliding the securing nibs at the sides of the grille on the underside of the hood. You can now clean the anti-grease grille: To clean the grille by hand: 9 Soak it for about one hour in hot water with a grease- loosening detergent then rinse off thoroughly with hot water. 9 Repeat the process if needed. Ref ...

  • Baumatic STD6.1 - page 11

    10 a) Changing the light bulb 9 Before changing the light bulb, en sure that the appliance is not live (i.e., ensure that you have switched it off at the omni-polar switch on the wall switch plate). 9 Open the grease filt er support grille (see previous page). 9 Find the bulb in its position. 9 Change the bulb using only olive-shaped spares with an ...

  • Baumatic STD6.1 - page 12

    11 Your Baumatic Cooker Hood uses a CARBON FILTER to purify the air for the air recirculation function. You will find that one filter will attach over the front of the fan motor (please see figu re at bottom of page). The active carbon filter must be replaced regularly, at least once every three months, to allow normal operation. B B e e f f o o r ...

  • Baumatic STD6.1 - page 13

    12 Before installation and usage, read all t he instructions and ma ke sure that the voltage (V) and th e frequency (Hz) indicated on th e identification p late (found inside your Cooker Hood) and all the dat a inside the ap pliance are exactly the same as the voltage and frequency in your home. NOTE: The manufacturer declines all responsibilit y i ...

  • Baumatic STD6.1 - page 14

    13 : The cooker hood must not be fitted above stoves with a radiant top plate. : We recommend that at least two people install this hood. Your Baumatic Cooker Hood should only be fitted on a wall on the underside of a cabinet unit. Do NOT position it any less than 700 mm (70 cm) above the hob. Before Installing, Remove the metal anti-grease filter ...

  • Baumatic STD6.1 - page 15

    14 7) KITCHEN UNIT / UNDERSIDE OF CABINET INSTALLATION NOTE: Ensure that the grease filter grille has been removed. 1) (E) – Extraction Functio n only If you are using the top exhaust outlet (meaning that you have plugged the rear one), first cu t a hole measuring 130mm in diameter in the floor of the cupboard into which the hood will be set (see ...

  • Baumatic STD6.1 - page 16

    15 If something has gone wrong with your Cooker Hood, checking against this chart might keep you from having to call for service. Symptom Solution The cooker hood will not start! • Check that the hood is connected to the electricity supply. • Check that the fan speed control is set properly. The cooker hood is not working effectively! • The f ...

  • Baumatic STD6.1 - page 17

    16 BAUMATIC LTD. - CONDITIONS OF GUARANTEE. Dear Customer, The conditions of guarantee whic h apply to your Baumat ic appliance are as follows: This product is guaranteed for 12 months from the date of original purchase. Baumatic Ltd will repair any defect that arises due to faulty materi als or workmanship free of charge during this period. In add ...

  • Baumatic STD6.1 - page 18

    17 Baumatic Ltd Make-up for your kit chen Headquarters Baumatic Ltd. Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX, United Kingdom Sales Telephon e +44 118 933 6900 Sales Fax +44 118 931 0035 Service Telep hone +44 118 933 6911 Service Fax +44 118 986 9124 Spares Telephone +44 118 933 6922 Technical / Ad vice Telephone +44 118 933 6 ...

  • Baumatic STD6.1 - page 19

    18 ...

  • Baumatic STD6.1 - page 20

    19 ...

Manufacturer Baumatic Category Hoods

Documents that we receive from a manufacturer of a Baumatic STD6.1 can be divided into several groups. They are, among others:
- Baumatic technical drawings
- STD6.1 manuals
- Baumatic product data sheets
- information booklets
- or energy labels Baumatic STD6.1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Baumatic STD6.1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Baumatic STD6.1, service manual, brief instructions and user manuals Baumatic STD6.1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Baumatic STD6.1.

Similar manuals

A complete manual for the device Baumatic STD6.1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Baumatic STD6.1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Baumatic STD6.1.

A complete Baumatic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Baumatic STD6.1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Baumatic STD6.1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Baumatic STD6.1, that we can find in the current document
3. Tips how to use the basic functions of the device Baumatic STD6.1 - which should help us in our first steps of using Baumatic STD6.1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Baumatic STD6.1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Baumatic STD6.1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Baumatic STD6.1?

Use the form below

If you did not solve your problem by using a manual Baumatic STD6.1, ask a question using the form below. If a user had a similar problem with Baumatic STD6.1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)