English dropdown-ico

Manual Sony FCB-EX1020

67 pages 1.48 mb
Download

Go to site of 67

Summary
  • Sony FCB-EX1020 - page 1

     2010 Sony Corporation Color Camera Module FCB-EX1020/EX1020P A-DJ7-100- 11 (2) Technical Manual ...

  • Sony FCB-EX1020 - page 2

    2 Ta b le of Contents Features ..................................................................... 3 Precautions ................................................................ 4 Locations of Contr ols ............................................... 5 Basic Functions ......................................................... 6 Ov er vie w of Func ...

  • Sony FCB-EX1020 - page 3

    3 Overview Features • The EX-view HAD TM CCD features 380,000 (NTSC) or 440,000 (PAL) effective picture elements and high-sensitivity shooting. The minimum illumination required is 1.4 lux ( 1 / 60 s (NTSC), 1 / 50 s (PAL), ICR OFF). •A CCD for shooting a wide dynamic range is employed to perform progressive or interlaced scanning, and images w ...

  • Sony FCB-EX1020 - page 4

    4 Overview Software Use of the demonstration software developed by Sony Corporation or use of the software with customer developed application software may damage hardware, the application program or the camera. Sony Corporation is not liable for any damages under these conditions. Operation Start the camera control software on your computer after ...

  • Sony FCB-EX1020 - page 5

    5 Locations of Controls Locations of Contr ols 1 Lens 2 CN500 jack 3 CN501 jack 4 CN702 jack (for key SW) 5 CN200 jack (for digital output) 6 TELE button 7 WIDE button 8 Tripod screw hole When a tripod is used, please use 7 mm ( 9 / 32 in.) or less screw to attach it to the camera. Also, please be sure to attach the tripod securely. Front Back Bott ...

  • Sony FCB-EX1020 - page 6

    6 Basic Functions Basic Functions Overview of Functions VISCA commands are the basis of camera control. Timing Chart As VISCA Command processing can only be carried out one time in a Vertical cycle, it takes the maximum 1V cycle time for an ACK/Completion to be returned. If the Command ACK/Completion communication time can be cut shorter than the 1 ...

  • Sony FCB-EX1020 - page 7

    7 Basic Functions Zoom The FCB camera employs a 36 × optical zoom lens combined with a digital zoom function; this camera allows you to zoom up to 432 × . •O ptical 36 × , f = 3.4 to 122.4 mm (F 1.6 to F 4.5) The horizontal angle of view is approximately 57.8 degrees (wide end) to 1.7 degrees (tele end). Digital Zoom enlarges the center of the ...

  • Sony FCB-EX1020 - page 8

    8 Basic Functions White Balance White Balance has the following modes, all of which can be set using VISCA Commands. • Auto White Balance This mode computes the white balance value output using color information from the entire screen. It outputs the proper value using the color temperature radiating from a black subject based on a range of value ...

  • Sony FCB-EX1020 - page 9

    9 Basic Functions AE – Manual The shutter speed (22 steps), iris (18 steps) and gain (16 steps) can be set freely by the user. AE – Bright The bright control function adjusts both gain and iris using an internal algorithm, according to a brightness level freely set by the user. Exposure is controlled by gain when dark, and by iris when bright. ...

  • Sony FCB-EX1020 - page 10

    10 Basic Functions Exposure Compensation Exposure compensation is a function which offsets the internal reference brightness level used in the AE mode, by steps of 1.5 dB. Data Step Setting value 0E 7 10.5 dB 0D 6 9 dB 0C 5 7.5 dB 0B 4 6 dB 0A 3 4.5 dB 09 2 3 dB 08 1 1.5 dB 07 0 0 dB 06 –1 –1.5 dB 05 –2 –3 dB 04 –3 –4.5 dB 03 –4 –6 ...

  • Sony FCB-EX1020 - page 11

    11 Basic Functions noise images can be obtained for the corresponding image brightness of a moving subject. This function has six steps: levels 1 to 5, plus off. Level 1 applies to subject motion mainly using 2D filter effects. With level 5, 2D and 3D filter effects are maximized, providing the lowest-noise images, although moving subjects may show ...

  • Sony FCB-EX1020 - page 12

    12 Basic Functions Note Flickering in images during color enhancement is not an indication of a camera malfunction. It can be reduced with the threshold level, hysteresis width, and edge enhancement (aperture) settings. Image Stabilizer Switching ON the Image Stabilizer function reduces image blurring caused by, for example, vibration, which allows ...

  • Sony FCB-EX1020 - page 13

    13 Basic Functions Camera ID The ID can be set up to 65,536 (0000 to FFFF). As this will be memorized in the nonvolatile memory inside, data will be saved regardless of whether it has been backed up. Effect It consists of the following functions. • Neg. Art: Negative/Positive Reversal • Black White: Monochrome Image Others E-FLIP This function ...

  • Sony FCB-EX1020 - page 14

    14 Basic Functions Synchronization methods Internal and external synchronization are available; VISCA Commands allow you to switch between them. • Internal synchronization An internal vibrator inside the camera generates a synchronizing signal as a basic oscillator. NTSC=59.94 Hz PAL=50 Hz • External synchronization (V-Lock Synchronization 1) ) ...

  • Sony FCB-EX1020 - page 15

    15 Basic Functions 1V Timing chart 8x 01 .. .. FF (Mask Setting Command) Setting command is reflected at this timing. Priv acy Zone Masking Function Privacy Zone masking protects private objects and areas such as house windows, entrances, and exits which are within the camera’s range of vision but not subject to surveillance. Privacy zone masking ...

  • Sony FCB-EX1020 - page 16

    16 Basic Functions Privacy Zone Setting Command List Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn 0r 0r 0s 0s FF Setting Mask(Size) See “mm: Mask setting list”, “nn: Setting”, and “pp: x, qq:y, rr: w, ss: h” in “Parameters” on page 17. Display 8x 01 04 77 pp pp pp pp FF Setting Mask Display O ...

  • Sony FCB-EX1020 - page 17

    17 Basic Functions Parameters Mask Name mm (Hex) Mask_A 00h Mask_B 01h Mask_C 02h Mask_D 03h Mask_E 04h Mask_F 05h Mask_G 06h Mask_H 07h Mask_I 08h Mask_J 09h Mask_K 0Ah Mask_L 0Bh nn:Setting pp: x, qq: y, rr: w, ss: h pp pp pp pp: Mask bit The “-” must be “0”. qq, rr: Color code pp pp pp pp bit 7 6 5 4321076543 2107654 3210765 43210 Mask - ...

  • Sony FCB-EX1020 - page 18

    18 Basic Functions Details of Setting Commands Set Mask Command: 8x 01 04 76 mm nn 0r 0r 0s 0s FF Parameters: Comments: Two different color masks can be chosen. The colors can be chosen from among 14 colors including the possibility for semi-transparency of each color. Therefore two colors from among the total of 29 colors including mosaic can be i ...

  • Sony FCB-EX1020 - page 19

    19 Basic Functions Motion Detection Function This function instructs the camera to detect movement within the monitoring area and then send an alarm signal automatically. The Detect signal goes out through the serial command (VISCA) communication line. Features •Y ou can set a frame for the detection range of 12 (horizontally) × 8 (vertically) b ...

  • Sony FCB-EX1020 - page 20

    20 Basic Functions Sending Alarms •W hen motion is detected, the Alarm Replay command is issued via the serial command (VISCA) communication line. • Frame Set You can set up to four frames by assigning the starting and terminating points. Note Set a terminating point higher vertically and horizontally than the starting point. If you set the wro ...

  • Sony FCB-EX1020 - page 21

    21 Basic Functions Spectral Sensitivity Characteristics Use the graph as a reference value. (We can not guarantee these values.) This data is measured when the IR cut filter is removed and the characteristics of the lens and optical source characteristics are ignored. Vibration Specifications Test Method (Random vibration) • Fix the camera at the ...

  • Sony FCB-EX1020 - page 22

    22 Basic Functions Ke y Switch Cir cuitr y The circuitry shown below is an example. Note that all switches in the figure do not function in all models. For more information, refer to the command list, check functions on the camera, or contact your Sony dealer. The CN101 is connected to the FCB camera main unit. ...

  • Sony FCB-EX1020 - page 23

    23 Basic Functions Name WIDE FAST WIDE SLOW TELE FAST TELE SLOW AF ON/OFF NEAR FAR ONE PUSH AF INFINITY AE AUTO BRIGHT SHUTTER IRIS BACK LIGHT EXP COMP ON/OFF EXP COMP UP EXP COMP DOWN WD ON/OFF AUTO WD ON/OFF Function Move ZOOM to WIDE side quickly. Move ZOOM to WIDE side slowly. Move ZOOM to TELE side quickly. Move ZOOM to TELE side slowly. Switc ...

  • Sony FCB-EX1020 - page 24

    24 Basic Functions Name AUTO WB ONE PUSH WB ATW INDOOR OUTDOOR MANUAL WB FREEZE LR REVERSE E-FLIP BLACK & WHITE NEGA ART MUTE DISPLAY TITLE EXEC UP DOWN POS0 POS1 POS2 POS3 POS4 POS5 CUSTOM POS PRESET POS RESET Function Switch to AUTO WB mode. Switch to One Push WB mode when pressed once and capture data when pressed 2nd time. Switch to ATW mod ...

  • Sony FCB-EX1020 - page 25

    25 Basic Functions Name APERTURE UP APERTURE DOWN BRIGHT UP BRIGHT DOWN AUTO SLOW SHUTTER ICR ON/OFF STABILIZER ON/OFF POWER ON/ OFF FUNCTION1 FUNCTION2 FUNCTION3 Function Increase aperture (Aperture UP) Decrease aperture (Aperture DOWN) Raise brightness setting (Bright UP) (When not in Bright mode, switching to Bright mode is made automatically de ...

  • Sony FCB-EX1020 - page 26

    26 Basic Functions Initial settings for the various functions of the FCB camera are indicated in the “Initial settings” column. The “Custom preset” column indicates whether the custom preset function can be used to store the settings. The function enables the stored settings to be recalled automatically when the camera is turned on. The “ ...

  • Sony FCB-EX1020 - page 27

    27 Basic Functions Mode/Position setting Initial settings Custom Back up preset at standby Camera Memory Same as the initial value setting aa Display On/Off Off aa Mute On/Off Off ×× WD Alarm On/Off Off × a Auto ICR Alarm On/Off Off aa Image Stabilizer On/Off/Hold Off aa NR Level 3 aa Gain Limit — aa Color Enhancement On/Off Off aa Title Displ ...

  • Sony FCB-EX1020 - page 28

    28 Basic Functions Mode Condition Condition Lens Mode Power Off Initializing Power On Freeze On MemRecall Zoom Direct Focus Direct ZmFo Direct Focus Auto Zoom Tele/Wide/Stop ×× a ××× a × a Zoom Direct ×× a ×× aa × a Zoom Focus Direct ×× a ×××× a × D-Zoom On/Off ×× a ××× a × a D-Zoom Separate/Combine ×× a ××× a × a D-Zo ...

  • Sony FCB-EX1020 - page 29

    29 Basic Functions White Balance Exposure Mode Power Off Initializing Power On Freeze On MemRecall WB AUTO Indoor Outdoor Outdoor Sodium Sodium OnePush ATW Manual AUTO Lamp Lamp AUTO WB Mode Switchover ×× a ×× aa aa aa aa a One Push WB ×× a ×× ×× ×× ×× a ×× RGain Setting ×× a ×× × × ×× ×× ×× a BGain Setting ×× a ×× ? ...

  • Sony FCB-EX1020 - page 30

    30 Basic Functions Mode Power Off Initializing Power On Freeze On MemRecall WD Alarm On/Off ×× a ×× Aperture Setting ×× a ×× High Resolution Mode On/Off ×× aaa LR_Reverse On/Off ×× a ×× Freeze On/Off ×× aa × Picture Effect Setting ×× a ×× ICR On/Off ×× a ×× Auto ICR On/Off ×× a ×× Auto ICR Threshold Level Setting ×× a ...

  • Sony FCB-EX1020 - page 31

    31 Command List Command List VISCA 1) /RS-232C Commands This Manual outlines an RS-232 control protocol and command list for certain Sony cameras from which control software can be developed. THIS CONTROL PROTOCOL AND COMMAND LIST IS PROVIDED BY SONY ON AN “AS-IS BASIS” WITHOUT WARRANTY OF ANY KIND. SONY DOES NOT WARRANT ANY PARTICULAR RESULT F ...

  • Sony FCB-EX1020 - page 32

    32 Command List VISCA Comm unication Specifications VISCA packet structure The basic unit of VISCA communication is called a packet. The first byte of the packet is called the header and comprises the sender’s and receiver’s addresses. For example, the header of the packet sent to the FCB camera assigned address 1 from the controller (address 0 ...

  • Sony FCB-EX1020 - page 33

    33 Command List Responses for commands and inquiries ● ACK message Returned by the FCB camera when it receives a command. No ACK message is returned for inquiries. ● Completion message Returned by the FCB camera when execution of commands or inquiries is completed. In the case of inquiry commands, it will contain reply data for the inquiry afte ...

  • Sony FCB-EX1020 - page 34

    34 Command List VISCA Device Setting Command Before starting control of the FCB camera, be sure to send the Address command and the IF_Clear command using the broadcast function. For VISCA network administration ● Address Sets an address of a peripheral device. Use when initializing the network, and receiving the following network change message. ...

  • Sony FCB-EX1020 - page 35

    35 Command List Command Command Message Reply Message General Command 81 01 04 38 02 FF 90 41 FF (ACK)+90 51 FF (Example) (Completion) 90 4 2 FF 90 5 2 FF 81 01 04 38 FF 90 60 02 FF (Syntax Error) (Example) 81 01 04 38 02 FF 90 60 03 FF (Example) (Command Buffer Full) 81 01 04 08 02 FF 90 61 41 FF (Example) (Command Not Executable) 90 6 2 41FF Inqu ...

  • Sony FCB-EX1020 - page 36

    36 Command List VISCA Camera-Issued Messages ACK/Completion Messages Command Messages ACK z0 4y FF (y:Socket No.) Completion z0 5y FF (y:Socket No.) Comments Returned when the command is accepted. Returned when the command has been executed. z = Device address + 8 Command Messages Syntax Error z0 60 02 FF Command Buffer Full z0 60 03 FF Command Can ...

  • Sony FCB-EX1020 - page 37

    37 Command List FCB Camera Commands Ne w Command List (1/1) Command Set Command Command Packet Comments CAM_IRCorrection Standard 8x 01 04 11 00 FF FOCUS IR compensation data switching IR Light 8x 01 04 11 01 FF CAM_WB Outdoor Auto 8x 01 04 35 06 FF Outdoor auto Sodium Lamp Auto 8x 01 04 35 07 FF Auto including sodium lamp source Sodium Lamp 8x 01 ...

  • Sony FCB-EX1020 - page 38

    38 Command List Command List (1/6) Command Set Command Command Packet Comments AddressSet Broadcast 88 30 01 FF Address setting IF_Clear Broadcast 88 01 00 01 FF I/F Clesr CommandCancel – 8x 2p FF p: Socket No. (=1 or 2) CAM_Power On 8x 01 04 00 02 FF Power ON/OFF Off 8x 01 04 00 03 FF CAM_Zoom Stop 8x 01 04 07 00 FF Tele(Standard) 8x 01 04 07 02 ...

  • Sony FCB-EX1020 - page 39

    39 Command List Command List (2/6) Command Set Command Command Packet Comments CAM_WB Auto 8x 01 04 35 00 FF Normal Auto Indoor 8x 01 04 35 01 FF Indoor mode Outdoor 8x 01 04 35 02 FF Outdoor mode One Push WB 8x 01 04 35 03 FF One Push WB mode ATW 8x 01 04 35 04 FF Auto Tracing White Balance Manual 8x 01 04 35 05 FF Manual Control mode One Push Tri ...

  • Sony FCB-EX1020 - page 40

    40 Command List Command List (3/6) Command Set Command Command Packet Comments CAM_Backlight On 8x 01 04 33 02 FF Back Light Compensation ON/OFF Off 8x 01 04 33 03 FF CAM_SpotAE On 8x 01 04 59 02 FF Spot Automatic Exposure Setting Off 8x 01 04 59 03 FF Position 8x 01 04 29 0p 0q 0r 0s FF pq: X (0 to F), rs: Y (0 to F) CAM_AE_Response DIRECT 8x 01 0 ...

  • Sony FCB-EX1020 - page 41

    41 Command List Command List (4/6) Command Set Command Command Packet Comments CAM On 8x 01 04 31 02 FF Auto ICR switching Alarm ON/OFF _AutoICRAlarmReply Off 8x 01 04 31 03 FF (Reply) y0 07 04 31 02 FF ICR OFF t ON y0 07 04 31 03 FF ICR ON t OFF CAM_Stabilizer On 8x 01 04 34 02 FF Hand shake correction ON/OFF Off 8x 01 04 34 03 FF Hold 8x 01 04 34 ...

  • Sony FCB-EX1020 - page 42

    42 Command List Command List (5/6) Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn mm: Mask Settings 0r 0r 0s 0s FF nn 00: Modify, 01: New rr: W, ss:H Display 8x 01 04 77 pp pp pp pp FF Mask Display ON/OFF pp pp pp pp: Mask Settings (0:OFF, 1:ON) SetMaskColor 8x 01 04 78 pp pp pp pp pp pp pp pp: Mask Color Sett ...

  • Sony FCB-EX1020 - page 43

    43 Command List Command List (6/6) Command Set Command Command Packet Comments CAM_MD On 8x 01 04 1B 02 FF Motion Detection On/Off Off 8x 01 04 1B 03 FF Function Set 8x 01 04 1C 0m 0n 0p 0q 0r 0s FF m: Display mode n: Detection Frame Set (0 to F) pq: Threshold Level (00 to FF) rs: Interval Time set (00 to FF) Window Set 8x 01 04 1D 0m 0p 0q 0r 0s F ...

  • Sony FCB-EX1020 - page 44

    44 Command List Ne w Quer y Command List (1/1) Inquiry Command Command Packet Inquiry Packet Comments CAM_IRCorrectionInq 8x 09 04 11 FF y0 50 00 FF Standard y0 50 01 FF IR Light CAM_WBModeInq 8x 09 04 35 FF y0 50 06 FF Outdoor Auto y0 50 07 FF Sodium Lamp Auto y0 50 08 FF Sodium Lamp CAM_GainLimitInq 8x 09 04 2C FF y0 50 0q FF p: Gain Limit CAM_WD ...

  • Sony FCB-EX1020 - page 45

    45 Command List Inquiry Command List (1/4) Inquiry Command Command Packet Inquiry Packet Comments CAM_PowerInq 8x 09 04 00 FF y0 50 02 FF On y0 50 03 FF Off CAM_ZoomPosInq 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom Position CAM_DZoomModeInq 8x 09 04 06 FF y0 50 02 FF D-Zoom On y0 50 03 FF D-Zoom Off CAM_DZoomC/SModeInq 8x 09 04 36 FF y0 50 00 F ...

  • Sony FCB-EX1020 - page 46

    46 Command List Inquiry Command List (2/4) Inquiry Command Command Packet Inquiry Packet Comments CAM_SpotAEModeInq 8x 09 04 59 FF y0 50 02 FF On y0 50 03 FF Off CAM_SpotAEPosInq 8x 09 04 29 FF y0 50 0p 0q 0r 0s FF pq: X position, rs: Y position CAM_AE_ResponseInq 8x 09 04 5D FF y0 50 pp FF pp: 01 to 20 (hex) CAM_WDModeInq 8x 09 04 3D FF y0 50 02 F ...

  • Sony FCB-EX1020 - page 47

    47 Command List Inquiry Command List (3/4) Inquiry Command Command Packet Inquiry Packet Comments CAM_PrivacyPanTiltInq 8x 09 04 79 FF y0 50 0p 0p 0p 0q 0q 0q FF ppp: Pan qqq: Tilt CAM_PrivacyPTZInq 8x 09 04 7B mm FF y0 50 0p 0p 0p 0q 0q 0q 0r 0r mm: Mask Settings 0r 0r FF ppp: Pan qqq: Tilt rrr: Zoom CAM_PrivacyMonitorInq 8x 09 04 6F FF y0 50 pp p ...

  • Sony FCB-EX1020 - page 48

    48 Command List Inquiry Command List (4/4) Inquiry Command Command Packet Inquiry Packet Comments CAM_ColorEnhanceInq 8x 09 04 20 FF y0 50 mm nn pp qq rr ss tt uu FF mm: Threshold level nn: Hysteresis width pp: Fixed color Y of high-intensity side qq: Fixed color Cr of high-intensity side rr: Fixed color Cb of high-intensity side ss: Fixed color Y ...

  • Sony FCB-EX1020 - page 49

    49 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 2 Zoom Position (HH) 1 0 70 60 50 3 40 3 2 Zoom Position (HL) 1 0 70 60 50 4 40 3 2 Zoom Position (LH) 1 0 70 60 50 5 40 3 2 Zoom Position (LL) 1 0 70 60 50 6 40 3 2 Focus Near Limit (H) 1 0 70 60 ...

  • Sony FCB-EX1020 - page 50

    50 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 2 R Gain (H) 1 0 70 60 50 3 40 3 2 R Gain (L) 1 0 70 60 50 4 40 3 2 B Gain (H) 1 0 70 60 50 5 40 3 2 B Gain (L) 1 0 Byte Bit Comments 70 60 50 6 40 3 2 WB Mode 1 0 70 60 50 7 40 3 2 Aperture Gain ...

  • Sony FCB-EX1020 - page 51

    51 Command List Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 2 40 3 Auto ICR Alarm (1: On, 0: Off) 2 Auto ICR 1: On 0: Off 1 Key Lock 1: On 0: Off 0 Power 1:On 0:Off 70 6 Stabilizer (1: On, 0: Off) 50 3 4 ICR 1: On 0: Off 3 Freeze 1:On 0:Off 2 LR Reverse 1:On 0:Of ...

  • Sony FCB-EX1020 - page 52

    52 Command List Enlargement Function1 Query Command ............. Command Packet 8x 09 7E 7E 03 FF Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 24 0 3 2 Digital Zoom Position (H) 1 0 70 60 50 34 0 3 2 Digital Zoom Position (L) 1 0 70 60 50 44 0 3 2 AF Activation T ...

  • Sony FCB-EX1020 - page 53

    53 Command List Enlargement Function2 Query Command ............. Command Packet 8x 09 7E 7E 04 FF Byte Bit Comments 7 6 Destination Address 5 0 4 3 2 Source Address 1 0 70 Completion Message (50h) 61 50 1 41 30 20 10 00 70 60 50 24 0 30 2 WideD mode (0: OFF, 1: ON, 1 2: Auto ON/OFF, 3: ON 0 (RatioFIx), 4: ON (Dver)) 70 60 50 34 0 3 WideD screen di ...

  • Sony FCB-EX1020 - page 54

    54 Command List Gain 0F 28 dB 0E 26 dB 0D 24 dB 0C 22 dB 0B 20 dB 0A 18 dB 09 16 dB 08 14 dB 07 12 dB 06 10 dB 05 8 dB 04 6 dB 03 4 dB 02 +2 dB 01 0 00 –3 dB Gain Limit 0F +28 dB 0E +26 dB 0D +24 dB 0C +22 dB 0B +20 dB 0A +18 dB 09 +16 dB 08 +14 dB 07 +12 dB 06 +10 dB 05 +8 dB 04 +6 dB VISCA Command Setting V alues Exposure control (1/2) NTSC (s) ...

  • Sony FCB-EX1020 - page 55

    55 Command List Exposure control (2/2) IRIS GAIN Bright 1F F1.6 28 dB 1E F1.6 26 dB 1D F1.6 24 dB 1C F1.6 22 dB 1B F1.6 20 dB 1A F1.6 18 dB 19 F1.6 16 dB 18 F1.6 14 dB 17 F1.6 12 dB 16 F1.6 10 dB 15 F1.6 8 dB 14 F1.6 6 dB 13 F1.6 4 dB 12 F1.6 2 dB 11 F1.6 0 10 F2 0 0F F2.4 0 0E F2.8 0 0D F3.4 0 0C F4 0 0B F4.8 0 0A F5.6 0 09 F6.8 0 08 F8 0 07 F9.6 ...

  • Sony FCB-EX1020 - page 56

    56 Command List Digital Zoom Combine mode X12-NTSC/PAL Digital Zoom Digital Zoom Ratio Position Data × 1 4000 × 2 6000 × 3 6A80 × 4 7000 × 5 7300 × 6 7540 × 7 76C0 × 8 7800 × 9 78C0 × 10 7980 × 11 7A00 × 12 7AC0 Digital Zoom Separate mode Lens control Zoom Position 0000 to 4000 to 7AC0 Wide end Optical Digital Tele end Tele end Focus Po ...

  • Sony FCB-EX1020 - page 57

    57 Command List AF Active Time 1) 00 to FF AF Interval Time 1) 00 to FF Spot AE X position 00 to 0F Spot AE Y position 00 to 0F R Gain 00 to FF B Gain 00 to FF Aperture Level 00 to 0F NR Level 00 to 05 V-Phase 00 to 020C (NTSC) 0270 (PAL) AE Response 01 to 30 AutoICR ON t 00 to 1C OFF Threshold Level MD Threshold Level 00 to FF MD Interval Time 1) ...

  • Sony FCB-EX1020 - page 58

    58 Specifications Specifications Picture elements FCB-EX1020: Approx. 380K pixels FCB-EX1020P: Approx. 440K pixels Horizontal resolution 550 TV lines (WIDE end) Lens 36 × zoom F= 3.4 mm (WIDE) to 122.4 mm (TELE), F1.6 to F4.5 Zoom movement speed (NTSC) Optical WIDE/Optical TELE 4.0 sec (Focus Tracking ON) 2.7 sec (Focus Tracking OFF) Optical WIDE/ ...

  • Sony FCB-EX1020 - page 59

    59 Specifications Digital Output Function Slow shutter is not available in the Interlace WD or Progressive WD mode. Digital Output Characteristics DC characteristics Operation Mode Digital Output (ITU-R BT656 equiv.) Interlace FCB-EX1020/P: 60i/50i, clock rate: 28 MHz Interlace WD Progressive FCB-EX1020/P: 60p/50p, clock rate: 56 MHz FCB-EX1020/P: ...

  • Sony FCB-EX1020 - page 60

    60 Specifications FCB Interior – Digital Output Connector Ferrite Beads Resistance Ferrite Beads Product number: BK20104M241-T (Taiyo Yuden) Impedance Frequency Characteristics (Reference) ...

  • Sony FCB-EX1020 - page 61

    61 Specifications FCB-EX1020P Digital Output Timing [50p mode] Data out [0-7] CLK [56.75 MHz] Horizontal Vertical Data out [0-7] 4CLK SAV 4CLK BLK 4CLK BLK 1504CLK Effective pixel 1H = 1816CLK 4CLK EAV 304CLK BLK 625H 24H BLK 582H Effective line BLK : Black data (Y 10, Cb/Cr 80) 19H 2H BLK Cr0 Y1 Cb0 Y0 Cr1 Y3 Cb1 Y2 Cr Y Cb Y Cr Y Cb Y BLK FCB-EX1 ...

  • Sony FCB-EX1020 - page 62

    62 Specifications FCB-EX1020 Digital Output Timing [60p mode] Data out [0-7] Horizontal Vertical Data out [0-7] CLK [57.2727 MHz] 4CLK SAV 4CLK BLK 4CLK BLK 1536CLK Effective pixel 1H = 1820CLK 4CLK EAV 276CLK BLK Cr0 Y1 Cb0 Y0 Cr1 Y3 Cb1 Y2 Cr Y Cb Y Cr Y Cb Y 525H 20H BLK 494H Effective line 11H BLK 2H BLK BLK : Black data (Y 10, Cb/Cr 80) FCB-EX ...

  • Sony FCB-EX1020 - page 63

    63 Specifications FCB-EX1020 Digital Output Timing [60i mode] Data out [0-7] Horizontal Vertical Data out [0-7] CLK [28.6363 MHz] 4CLK SAV 4CLK BLK 4CLK BLK 1536CLK Effective pixel 1H = 1820CLK 4CLK EAV 276CLK BLK Cr0 Y1 Cb0 Y0 Cr1 Y3 Cb1 Y2 Cr Y Cb Y Cr Y Cb Y FLD1 ODD LINE FLD2 EVEN LINE 13H 247H Effective line 2H 2H 3H 13H 247H Effective line FL ...

  • Sony FCB-EX1020 - page 64

    64 Specifications DIGITAL Image Output Y, Cr, Cb 4:2:2 FORMAT ...

  • Sony FCB-EX1020 - page 65

    65 Specifications 2-M2 85.2 CN500 9.5 7.5 14 53 20 1/4-20UNC 36 29 ± 0.1 40.2 33 ± 0.1 CN501 8-M2 14 ± 0.1 16 ± 0.1 27 ± 0.1 4.5 4-M2 87.9 50 25 10 2.5 48.3 ± 0.1 73 ± 0.1 25.4 ± 0.1 10 ø34.016 ø38.6 57.5 (27.5) 30 (57.5) 9-M2 CN200 "D"Mark SW CN702 15 36.5 22.5 5 20 ± 0.1 20 ± 0.1 20 ± 0.1 28 ± 0.1 21 ± 0.1 Unit: mm (inche ...

  • Sony FCB-EX1020 - page 66

    66 Specifications Pin assignment CN501 KYOCERA ELCO Co. 00 6200 509 130 000+ Pin No. Name Level 1 RxD CMOS 5 V (low: max 0.8 V, high: min 2.0 V) Read Data 2 TxD CMOS 5 V (low: max 0.1 V, high: min 4.4 V) Send Data 3 GND (for RxD&TxD) 4 DC IN 9.0 V±3 V 5 GND (for DC IN) 6 VBS OUT 1.0 V±0.2 V 7 GND (for VBS OUT) 8V LOCK PULSE External VD-Lock P ...

  • Sony FCB-EX1020 - page 67

    67 Specifications Strobe signal specifications Pin No. Name Level 1 GND 2 Digital Out 0 0 - 3.3 Vp-p 3 Digital Out 1 0 - 3.3 Vp-p 4 Digital Out 2 0 - 3.3 Vp-p 5 Digital Out 3 0 - 3.3 Vp-p 6 Digital Out 4 0 - 3.3 Vp-p 7 Digital Out 5 0 - 3.3 Vp-p 8 Digital Out 6 0 - 3.3 Vp-p 9 Digital Out 7 0 - 3.3 Vp-p 10 GND 11 CLOCK 0 - 3.3 Vp-p 12 GND CN200 KYOC ...

Manufacturer Sony Category Security Camera

Documents that we receive from a manufacturer of a Sony FCB-EX1020 can be divided into several groups. They are, among others:
- Sony technical drawings
- FCB-EX1020 manuals
- Sony product data sheets
- information booklets
- or energy labels Sony FCB-EX1020
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sony FCB-EX1020.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sony FCB-EX1020, service manual, brief instructions and user manuals Sony FCB-EX1020. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sony FCB-EX1020.

Similar manuals

A complete manual for the device Sony FCB-EX1020, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sony FCB-EX1020 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sony FCB-EX1020.

A complete Sony manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sony FCB-EX1020 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sony FCB-EX1020, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sony FCB-EX1020, that we can find in the current document
3. Tips how to use the basic functions of the device Sony FCB-EX1020 - which should help us in our first steps of using Sony FCB-EX1020
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sony FCB-EX1020
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sony FCB-EX1020 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sony FCB-EX1020?

Use the form below

If you did not solve your problem by using a manual Sony FCB-EX1020, ask a question using the form below. If a user had a similar problem with Sony FCB-EX1020 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)