English dropdown-ico

Manual Jeep liberty (2008)

493 pages Not applicable
Download

Go to site of 493

Summary
  • Jeep liberty (2008) - page 1

    T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 8 3 4 INSTRUMENT P ANEL AND CONTROLS ......................................... ...

  • Jeep liberty (2008) - page 2

    I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 3

    INTRODUCTION CONTENTS m Introduction ........................... 4 m Rollover W arning ........................ 4 m How T o Use This Manual .................. 5 m W arnings And Cautions ................... 7 m V ehicle Identification Number ............... 7 m V ehicle Modifications / Alterations ........... 8 1 I n f o r m a t i o n P r o v i d e ...

  • Jeep liberty (2008) - page 4

    INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti ...

  • Jeep liberty (2008) - page 5

    Failure to use driver and passenger seat belts pr ovided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year , and could reduce disabling injuries by 2 million annually . In a r ollover crash, an unbelted person is ...

  • Jeep liberty (2008) - page 6

    6 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 7

    W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against pr ocedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information. Observe all W arnings and Cautions. VEHICLE ...

  • Jeep liberty (2008) - page 8

    VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 8 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 9

    THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 4 m Sentry Key ............................ 1 4 ▫ Replacement Keys ...................... 1 6 ▫ Customer Key Programming .............. 1 6 ▫ ...

  • Jeep liberty (2008) - page 10

    ▫ T o Unlatch The Liftgate Flip-Up W indow ..... 2 4 ▫ Using The Panic Alarm .................. 2 4 ▫ Programming Additional T ransmitters ........ 2 5 ▫ Battery Replacement .................... 2 5 ▫ General Information .................... 2 6 m Remote Starting System — If Equipped ........ 2 7 ▫ How T o Use Remote Start ........... ...

  • Jeep liberty (2008) - page 11

    ▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag ............ 5 2 ▫ Child Restraint ........................ 6 9 m Engine Break-In Recommendations ........... 7 9 m Safety T ips ............................ 7 9 ▫ T ransporting Passengers ................. 7 9 ▫ Lock Y our V ehicle ...................... 8 0 ▫ Exha ...

  • Jeep liberty (2008) - page 12

    A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automat ...

  • Jeep liberty (2008) - page 13

    Manual T ransmission — If Equipped T urn the key to the ACC position and then push the key and cylinder inward slightly and rotate the key to the LOCK position. Then remove the key . NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), features such as the power window switches, radio, power sunroof or Sky S ...

  • Jeep liberty (2008) - page 14

    W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle. CAUTION! An unlocked vehicle is an invitation to ...

  • Jeep liberty (2008) - page 15

    the vehicle. The system will shut the engine off in two (2) seconds if someone uses an invalid key to start the engine. NOTE: A key , which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition switch lock cylinder for that vehicle. During normal operation, after turning on the ignition switch, the V ehicl ...

  • Jeep liberty (2008) - page 16

    Replacement Keys NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! Always remove Sentry Keys from the vehicle and lock all doors when leaving the vehicle unattended. At the time of purchase, ...

  • Jeep liberty (2008) - page 17

    addition, the V ehicle Security Alarm Indicator Light will begin to flash. T urn the ignition switch to the “LOCK” position and remove the second key . 4. Insert a blank Sentry Key into the ignition switch. T urn the ignition switch to the “ON” position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the V ehicl ...

  • Jeep liberty (2008) - page 18

    STEERING WHEEL LOCK — IF EQUIPPED Y our vehicle may be equipped with a passive steering wheel lock (manual transmission only). This lock pr e- vents steering the vehicle without the ignition key . If the steering wheel is moved a half turn in either direction and the key is not in the ignition, the steering wheel will lock. T o Manually Lock the ...

  • Jeep liberty (2008) - page 19

    Rearming of the System: If something triggers the alarm, and no action is taken to disarm it, the system will turn off the horn after 3 minutes, turn off all of the visual signals after 15 minutes, and then the system will rearm itself. T o Arm the System: 1. Remove the key from the ignition switch and exit the vehicle. 2. Lock the doors and liftga ...

  • Jeep liberty (2008) - page 20

    The Security Alarm System is designed to pr otect your vehicle; however , you can create conditions where the system will give you a false alarm. If the previously described arming sequence has occurred, the system will arm regar dless of whether you are inside or outside the vehicle. If you remain inside the vehicle and open a door , the alarm wil ...

  • Jeep liberty (2008) - page 21

    NOTE: Inserting the key into the ignition switch dis- ables all buttons on the transmitter . T o Unlock the Doors and Liftgate: Press and r elease the Unlock button on the transmitter once to unlock the driver’s door , or twice to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminate ...

  • Jeep liberty (2008) - page 22

    3. T est the featur e from outside the vehicle by pr essing the Lock and Unlock buttons on the transmitter . 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the Lock button on the transmitter while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm act ...

  • Jeep liberty (2008) - page 23

    • For vehicles not equipped with the EVIC, perform the following steps: 1. Press the Lock button on a programmed (i.e. func- tional) transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press the Panic button while still holding the Lock button. 2. Release both buttons at the same time. 3. T est the featur e from outside the v ...

  • Jeep liberty (2008) - page 24

    2. Release both buttons at the same time. 3. T est the featur e from outside the vehicle by pr essing the Lock and Unlock buttons on the transmitter . 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the Lock button on the transmitter while you are inside the vehicle will activate the Security Alarm. ...

  • Jeep liberty (2008) - page 25

    headlights and turn signal lights will flash, the horn will pulse on and off, and the illuminated entry system will turn on. The panic alarm will stay on for 3 minutes unless you turn it off by pressing the Panic button a second time or if the vehicle speed is 5 mph (8 km/h) or greater . During the Panic Mode, the door locks and remote keyless entr ...

  • Jeep liberty (2008) - page 26

    2. W ith the transmitter buttons facing down, use a flat blade tool to pry the two halves of the transmitter case apart. Make sure not to damage the seal during removal. 3. Remove and replace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing ...

  • Jeep liberty (2008) - page 27

    NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. If your Keyless Entry T ransmitter fails to operate from a normal distance, check for these two conditions. 1. W eak batteries in transmitter . The expected life of the batteries is from one to ...

  • Jeep liberty (2008) - page 28

    How T o Use Remote Start All of the following conditions must be met before the engine will remote start: • Gear selector lever in “P” (Park). • Doors closed. • Hood closed. • Liftgate closed. • Hazard switch off. • Brake switch inactive (brake pedal not pressed). • Ignition key removed from ignition switch. • Battery at an acce ...

  • Jeep liberty (2008) - page 29

    T o Exit Remote Start Mode & Drive the V ehicle Before the end of the 15-minute cycle, press and release the Unlock button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the ON position. NOTE: The ignition switch must be in the ...

  • Jeep liberty (2008) - page 30

    If the door lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the keys are not inside the vehicle before closing the door . NOTE: The manual door locks will not lock or unlock the liftgate. W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as ...

  • Jeep liberty (2008) - page 31

    Power Door Locks A power door lock switch is on each fr ont door trim panel. Use this switch to lock or unlock the doors and liftgate. If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate. This prevents you from acciden- tally locking your keys in the vehicle. Removin ...

  • Jeep liberty (2008) - page 32

    Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “Personal Settings (Customer Programmable Features)” under “Elec- tronic V ehicle Information Center (EVIC)” in Section 4 of this manual for detai ...

  • Jeep liberty (2008) - page 33

    5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “Personal Settings (Customer Programmable Feature ...

  • Jeep liberty (2008) - page 34

    2. Insert the tip of the ignition key into the child lock control and rotate it to the lock position. 3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position. W ARNING! A void trapping an ...

  • Jeep liberty (2008) - page 35

    • For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window , and open the door with the outside door handle. T o Disengage the Child Protection Door Lock 1. Open the rear door . 2. Insert the tip of the ignition key into the child lock control and rotate it to the unlock position. 3. Repeat St ...

  • Jeep liberty (2008) - page 36

    WINDOWS Power Windows The window contr ols on the driver’s door trim panel control all the door windows. There are single window contr ols on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition switch is in the ON or ACC position. W ARNING! Never leave children in a vehicle, ...

  • Jeep liberty (2008) - page 37

    T o open the window part way , pr ess the window switch to the first detent and release it when you want the window to stop. T o stop the window from going all the way down during the auto-down operation, pull up on the switch briefly . For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will ...

  • Jeep liberty (2008) - page 38

    will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will cancel this fe ...

  • Jeep liberty (2008) - page 39

    Reset It may be necessary at some point in time to reactivate the auto-up feature. T o do so, perform the following procedur e: 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed. 2. Push the window switch down firmly to the second detent to open the ...

  • Jeep liberty (2008) - page 40

    LIFTGA TE T o open the liftgate, pull up (squeeze) on the handle and lift. NOTE: Use the power door lock switch on either front door trim panel or the Remote Keyless Entry (RKE) transmitter to lock and unlock the liftgate. The manual door locks on the doors and the driver’s door lock cylinder will not lock and unlock the liftgate. W ARNING! Drivi ...

  • Jeep liberty (2008) - page 41

    OCCUP ANT RESTRAINTS Some of the most important safety featur es in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, front airbags for both the driver and front passenger , and side curtain airbags for the driver and passengers seated next to a window . If you will be carrying ch ...

  • Jeep liberty (2008) - page 42

    inside of the vehicle. Everyone in a motor vehicle should be belted at all times to reduce or prevent injuries. Lap/Shoulder Belts All seating positions in your vehicle have combination lap/shoulder belts. The belt webbing retractor is de- signed to lock during very sudden stops or collisions. This feature allows the shoulder part of the belt to mo ...

  • Jeep liberty (2008) - page 43

    Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap. Latch Plate THINGS TO KNOW BEFORE ST ...

  • Jeep liberty (2008) - page 44

    3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt ...

  • Jeep liberty (2008) - page 45

    4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can in ...

  • Jeep liberty (2008) - page 46

    6. T o release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , che ...

  • Jeep liberty (2008) - page 47

    As a guide, if you ar e shorter than average, you will prefer a lower position, and if you are taller than average, you will prefer a higher position. When you release the anchorage, try to move it up and down to make sure that it is locked in position. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ sho ...

  • Jeep liberty (2008) - page 48

    Enhanced Seat Belt Use Reminder System (BeltAlert) If the driver’s or front passenger’s seat belt has not been buckled within 60 seconds of starting the vehicle, and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt. The driver should ...

  • Jeep liberty (2008) - page 49

    3. W ithin 60 seconds of turning the ignition switch to the ON position, unbuckle and then re-buckle the driver’s seat belt at least thr ee times within 10 seconds, ending with the seat belt buckled. NOTE: W atch for the Seat Belt Reminder Light to turn on while unbuckling the seat belt and turn off while re-buckling the seat belt. It may be nece ...

  • Jeep liberty (2008) - page 50

    How to Disengage The Automatic Locking Mode Disconnect the combination lap/shoulder belt from the buckle and allow it to r etract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. Energy Management Feature This vehicle has a safety belt system with an energy management feature in the fro ...

  • Jeep liberty (2008) - page 51

    Keep the belt low so that it does not come across the abdomen. That way the str ong bones of the hips will take the force if there is a collision. Seat Belt Extender If a seat belt is too short, even when fully extended, and when the adjustable upper shoulder belt anchorage (if so equipped) is in its lowest position, your authorized dealer can prov ...

  • Jeep liberty (2008) - page 52

    Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment. The words ...

  • Jeep liberty (2008) - page 53

    The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity and occupant size. The front passenger airbag is also certified to the Federal regulations that define Occupant Classification (r efer to information on Occupant Classification System in this secti ...

  • Jeep liberty (2008) - page 54

    W ARNING! • Do not put anything on or around the front and side curtain airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflating. • Do not stack luggag ...

  • Jeep liberty (2008) - page 55

    classified in a category other than that of an adult (refer to information on Occupant Classification System in this section). This could be a child, teenager , or even a small size adult. Here are some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should always ride buckled up in ...

  • Jeep liberty (2008) - page 56

    4. Do not lean against the door or window , airbags will inflate forcefully into the space between you and the door . 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under “If Y ou Need Assistance” in Section 9 of this manual. W ARNING! • R ...

  • Jeep liberty (2008) - page 57

    Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Airbag W arning Light • Driver Airbag • Front Passenger Airbag • Side Curtain Airbags above Side W indows • Side Remote Acceleration Sensors • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Fron ...

  • Jeep liberty (2008) - page 58

    The ORC also monitors the r eadiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON position. These include all of the items listed above except the Passenger Airbag Disable (P AD) Indicator Light, the instrument panel, and the steering wheel and column. If the key is in the LOCK position, in the ACC pos ...

  • Jeep liberty (2008) - page 59

    NOTE: Children 12 years and under should always ride buckled up in a r ear seat in an appropriate child restraint. • The Passenger Airbag Disable (P AD) Indicator Light (an amber light located in the center of the instrument panel) tells the driver and front passenger when the front passenger airbag is turned of f. The “P AD Indi- cator Light? ...

  • Jeep liberty (2008) - page 60

    is turned off and it will not inflate. If the “P AD Indicator Light” is not illuminated, DO NOT assume the airbag is turned off and move the child restraint to the rear seat. A deploying passenger airbag can cause death or serious injury to a child in a rear facing infant seat. NOTE: Even though this vehicle is equipped with an Occupant Classif ...

  • Jeep liberty (2008) - page 61

    will cause the system to turn the airbag on. In this case, the OCS has classified the occupant of the seat as an adult. An adult occupant needs to sit in a normal position (with their feet on or near the floor) in order to be properly classified. Reclining the seat back too far may change how an occupant is classified by the OCS. Drivers and adult ...

  • Jeep liberty (2008) - page 62

    lodged under the seat and interferes with operation of the weight sensors, a fault will occur which turns on both the “P AD Indicator Light” and the “Airbag W arning Light.” Once the lodged object is removed, the fault will be automatically cleared after a short period of time. • The Driver and Passenger Airbag/Inflator Units are located ...

  • Jeep liberty (2008) - page 63

    • The Side Impact SRS Side Curtain Airbags are de- signed to activate only in certain side collisions and rollover events. When the ORC detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle or both sides of the vehicle for a rollover event. A quantity of nontoxic gas is generat ...

  • Jeep liberty (2008) - page 64

    W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly or its related com- ponents may inadvertently change the airbag deploy- ment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an accident. A modified vehicle may not comply w ...

  • Jeep liberty (2008) - page 65

    • As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water . For nose or thr oat irritation ...

  • Jeep liberty (2008) - page 66

    • T urns on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlocks the doors automatically . NOTE: The interior lights can only be deactivated if the key is removed from the ignition switch or the vehicle is driven. Maintaining Y our Airbag System W ARNING! • Modifications to any ...

  • Jeep liberty (2008) - page 67

    NOTE: Perchlorate Material – special handling may apply , See www .dtsc.ca.gov/hazardouswaste/per chlorate Airbag W arning Light Y ou will want to have the airbag system ready to inflate for your protection in an impact. The airbag system is designed to be maintenance free. If any of the following occurs, have an authorized dealer service the sys ...

  • Jeep liberty (2008) - page 68

    In conjunction with other data gathered during a com- plete accident investigation, the electronic data may be used by DaimlerChrysler Corporation and others to learn more about the possible causes of crashes and associated injuries in order to assess and improve vehicle perfor- mance. In addition to crash investigations initiated by DaimlerChrysle ...

  • Jeep liberty (2008) - page 69

    Data Parameters that May Be Recorded: • Diagnostic tr ouble code(s) and warning light status for electronically controlled safety systems, including the airbag system • Airbag disable light status (if equipped) • 9 T ime 9 of airbag deployment (in terms of ignition cycles and vehicle mileage) • Airbag deployment level (if applicable) • Im ...

  • Jeep liberty (2008) - page 70

    W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper re ...

  • Jeep liberty (2008) - page 71

    “LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren)” in this section. • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with the front passenger airbag unless the airbag is turned off. An airbag deployment could cause sever e injury or death to infants in this position. Older Children ...

  • Jeep liberty (2008) - page 72

    • Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. NOTE: For additional information, refer to www .seatcheck.org ...

  • Jeep liberty (2008) - page 73

    Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. The manufacturer also recommends that you try a child restraint in the vehicle seats where you will use it before you buy it. • The restraint must be ap ...

  • Jeep liberty (2008) - page 74

    connection to the top tether anchorages have been avail- able for some time. For some older child restraints, many child restraint manufacturers offer add-on tether strap kits or retrofit kits. Y ou are urged to take advantage of all the available attachments provided with your child re- straint in any vehicle. The two outboard rear -seating positi ...

  • Jeep liberty (2008) - page 75

    The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back, and are just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. In addition, there ar e tether ...

  • Jeep liberty (2008) - page 76

    means of adjusting the tension in the strap. Forward- facing toddler restraints and some rear -facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. Y ou will first loosen the adjusters on the lower straps and on the tether strap so ...

  • Jeep liberty (2008) - page 77

    belt. However , any seat belt system may loosen with time, so check the belt occasionally , and pull it tight if necessary . If the seat belt has an automatic locking r etractor , pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle. Then, pull the belt unt ...

  • Jeep liberty (2008) - page 78

    T o attach a child restraint tether strap: Route the tether strap over the seat back and attach the hook to the tether anchor located on the back of the seat. For the outboard seating positions, route the tether underneath the headrest and attach the hook to the tether anchor located on the back of the seat. W ARNING! An incorrectly anchored tether ...

  • Jeep liberty (2008) - page 79

    ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not requir ed for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable. While cruising, brief full-throttle acceleration, within the limits of local traffic laws, co ...

  • Jeep liberty (2008) - page 80

    W ARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a ...

  • Jeep liberty (2008) - page 81

    inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as requir ed. W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing (CO) follow the safety tips below ...

  • Jeep liberty (2008) - page 82

    Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoper- able. Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tread wear ...

  • Jeep liberty (2008) - page 83

    UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 8 8 ▫ Inside Day/Night Mirror ................. 8 8 ▫ Automatic Dimming Mirror — If Equipped .... 8 8 ▫ Outside Mirrors ....................... 8 9 ▫ Exterior Mirrors Folding Feature — If Equipped .......................... 9 0 ▫ Power Remo ...

  • Jeep liberty (2008) - page 84

    m Seats ................................ 1 1 8 ▫ Manual Front Seat Adjustments ........... 1 1 8 ▫ Power Seat — If Equipped ............... 1 2 1 ▫ Head Restraints ...................... 1 2 2 ▫ Heated Seats — If Equipped ............. 1 2 3 ▫ 60/40 Split Folding Rear Seat W ith Fold Flat Feature ............................ 1 2 4 m D ...

  • Jeep liberty (2008) - page 85

    ▫ Flash T o Pass ........................ 1 3 7 ▫ Interior Lights ....................... 1 3 8 m W indshield W ipers And W ashers ............ 1 4 0 ▫ Intermittent W iper System ............... 1 4 1 ▫ Mist Feature ......................... 1 4 2 ▫ Headlights W ith W ipers (A vailable W ith Auto Headlights Only) ..................... 1 4 ...

  • Jeep liberty (2008) - page 86

    ▫ Using HomeLink t ..................... 1 5 9 ▫ Reprogramming a Single HomeLink t Button ............................. 1 6 0 ▫ Security ............................ 1 6 0 ▫ T roubleshooting T ips ................... 1 6 0 ▫ General Information ................... 1 6 1 m Power Sunroof — If Equipped ............. 1 6 1 ▫ Opening Sunro ...

  • Jeep liberty (2008) - page 87

    m Power Inverter — If Equipped ............. 1 7 0 m Cup Holders .......................... 1 7 2 m Storage .............................. 1 7 3 ▫ Front Storage Compartment .............. 1 7 3 ▫ Console Storage Compartment ............ 1 7 3 m Cargo Area Features ..................... 1 7 4 ▫ Cargo Load Floor ..................... 1 7 4 m ...

  • Jeep liberty (2008) - page 88

    MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window . A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle). The mirror should be adjusted while set ...

  • Jeep liberty (2008) - page 89

    CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors T o receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the ...

  • Jeep liberty (2008) - page 90

    Exterior Mirrors Folding Feature — If Equipped Some models have exterior mirrors that ar e hinged. The hinge allows the mirr or to pivot forwar d and r earward to resist damage. The hinge has three detent positions, forward, rearward, and normal. Power Remote Control Mirrors The power mirror switch is located on driver’s door trim panel. Models ...

  • Jeep liberty (2008) - page 91

    Models with Express Window Featur e Press and release the mirror select button marked L or R and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selec- tion will time out after 30 seconds of inactivity to guard against accidentally moving a mirror position following an adjustment. NOTE: For ve ...

  • Jeep liberty (2008) - page 92

    Sun V isor “Slide-Out” Feature — If Equipped The sun visor “slide-on r od” featur e allows for additional flexibility in positioning the visor to block out the sun. 1. Fold down sun visor . 2. Unclip visor from center clip. 3. Pull the sun visor toward inside rearview mirror to extend. HANDS–FREE COMMUNICA TION (UConnect T )— IF EQUIP ...

  • Jeep liberty (2008) - page 93

    UConnect t allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micr o- phone for private conversation. The UConnect t phone book enables you to store up to 32 names and four numbers per name. Each language has a separate 32-name phone book accessible only ...

  • Jeep liberty (2008) - page 94

    you may not be able to use any UConnect t features. Refer to your cellular service provider or the phone manufacturer for details. The UConnect t system is fully integrated with the vehi- cle’s audio system. The volume of the UConnect t system can be adjusted either from the radio volume contr ol knob or from the steering wheel radio contr ol (ri ...

  • Jeep liberty (2008) - page 95

    V oice Command T ree Refer to “V oice T ree” at the end of this section. Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say 9 Help 9 following the beep. The UConnect t system will play all the options at any prompt if you ask for help. T o activate the UConnect t system from idle, simply pr ...

  • Jeep liberty (2008) - page 96

    Y ou can enter any four-digit pin number . Y ou will not need to remember this pin number after the initial pairing process. • For identification purposes, you will be prompted to give the UConnect t system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • Y ou will then be asked to give y ...

  • Jeep liberty (2008) - page 97

    • The UConnect t system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. Call by Saying a Name • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say “Call. 9 • System will prompt you to say the name of the person you want call. • After the ...

  • Jeep liberty (2008) - page 98

    • When prompted, recite the phone number for the phone book entry that you are adding. After you are finished adding an entry into the phone book, you will be given the opportunity to add more phone numbers to the curr ent entry or to r eturn to the main menu. The UConnect t system will allow you to enter up to 32 names in the phone book with eac ...

  • Jeep liberty (2008) - page 99

    Edit Entries in the UConnect t Phonebook NOTE: Editing names in the phone book is recom- mended when vehicle is not in motion. • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook Edit. 9 • Y ou will then be asked for the name of the phone book entry that you wish to edit. • Next, cho ...

  • Jeep liberty (2008) - page 100

    from the list, press the 9 V oice Recognition 9 button while the UConnect t system is playing the desired entry and say 9 Delete. 9 • After you enter the name, the UConnect t system will ask you which designation you wish to delete, home, work, mobile, pager , or all. Say the designation you wish to delete. • Note that only the phone book entry ...

  • Jeep liberty (2008) - page 101

    • The UConnect t system will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through the UConnect t system if the feature(s) are available on your cellular service plan. For example, if your cellular service plan provides three-way ca ...

  • Jeep liberty (2008) - page 102

    entry you wish to call. The first call will be on hold while the second call is in progress. T o go back to the first call, refer to 9 T oggling Between Calls. 9 T o combine two calls, refer to 9 Conference Call. 9 Place/Retrieve a Call from Hold T o put a call on hold, press the 8 Phone’ button until you hear a single beep. This indicates that t ...

  • Jeep liberty (2008) - page 103

    hold may not become active automatically . This is cell phone dependent. T o bring the call back from hold, press and hold the “Phone” button until you hear a single beep. Redial • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Redial. 9 • The UConnect t system will call the last number t ...

  • Jeep liberty (2008) - page 104

    UConnect T System Features Language Selection T o change the language that the UConnect t system is using, • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to ...

  • Jeep liberty (2008) - page 105

    The UConnect t system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly . Y our phone must be turned on and paired to the UCon- nect t system to allow use of this vehicle feature in emergency situations when the cell phone has network coverage and stays paired to the UConnect t system. T owi ...

  • Jeep liberty (2008) - page 106

    service or automated customer service. Some services requir e immediate response selection, in some instances, that may be too quick for use of UConnect t system. When calling a number with your UConnect t system that normally r equires you to enter in a touch-tone sequence on your cellular phone keypad, you can push the “V oice Recognition” bu ...

  • Jeep liberty (2008) - page 107

    a { , 9 you could press the “V oice Recognition” button and say 9 Pair a Phone 9 to select that option without having to listen to the rest of the voice prompt. T urning Confirmation Prompts On/Off T urning confirmation prompts off will stop the system from confirming your choices (e.g., the UConnect t sys- tem will not repeat a phone number be ...

  • Jeep liberty (2008) - page 108

    may feel that the call did not go through even though the call is in progr ess. Once your call is answered, you will hear the audio. Mute/Un-Mute (Mute Off) When you mute the UConnect t system, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you. In order to mute the UConnec ...

  • Jeep liberty (2008) - page 109

    List Paired Cellular Phone Names • Press the “Phone” button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing.” • When prompted, say 9 List Phones. 9 • The UConnect t system will play the phone names of all paired cellular phones in order from the highest to the lowest priority . T o “select ...

  • Jeep liberty (2008) - page 110

    • Y ou can also press the “V oice Recognition” button anytime while the list is being played, and then choose the phone you wish to delete. Things Y ou Should Know About Y our UConnect T System UConnect t T utorial T o hear a brief tutorial of the system features, press the “Phone” button and say “UConnect t T utorial.” V oice T raini ...

  • Jeep liberty (2008) - page 111

    • Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: • low-to-medium blower setting, • low-to-medium ve ...

  • Jeep liberty (2008) - page 112

    • Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertible vehicle, system performance may be compromised with the convertible top down. Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low- ...

  • Jeep liberty (2008) - page 113

    UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 113 3 I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 114

    1 14 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 115

    UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 115 3 I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 116

    V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts. continue delete dial download edit emergency English erase all Espanol Francais help home 1 16 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o ...

  • Jeep liberty (2008) - page 117

    V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan ...

  • Jeep liberty (2008) - page 118

    General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration. SEA TS Manual Front Seat Adju ...

  • Jeep liberty (2008) - page 119

    W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. Recliner Adjustment The recliner contr ol is on the outboard side of the seat. T o recline the ...

  • Jeep liberty (2008) - page 120

    W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a ...

  • Jeep liberty (2008) - page 121

    Power Seat — If Equipped The power seat switch is on the outboard side of the seat near the floor . For vehicles equipped with a power driver’s seat, use this switch to move the seat up, down, forward, rearwar d, or to tilt the seat. For vehicles equipped with a power passenger seat, use this switch to move the seat forward and rearward. Fold F ...

  • Jeep liberty (2008) - page 122

    CAUTION! Do not place any article under any seat as it may cause damage to the seat controls. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked. H ...

  • Jeep liberty (2008) - page 123

    Heated Seats — If Equipped Heated seats pr ovide comfort and warmth on cold days and can help soothe sore muscles and backs. The heaters provide the same heat level for both cushion and back. The driver and front passenger seats are heated. The controls for each heater ar e located near the bottom center of the instrument panel. After turning on ...

  • Jeep liberty (2008) - page 124

    Press the switch once to select high-level heating. Press the switch a second time to select low-level heating. Press the switch a third time to shut off the heating elements. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The heat output the ...

  • Jeep liberty (2008) - page 125

    NOTE: Prior to folding the rear seat, it may be necessary to position the front seat to its mid-track position. Also, be sure that the front seats are fully upright and posi- tioned forwar d. This will allow the rear seat to fold down easily . W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a coll ...

  • Jeep liberty (2008) - page 126

    4. If desired, push down on the seatback to lock it in the folded position. T o Raise the Rear Seat NOTE: If interfer ence from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position. 1. If locked in the folded position, pull the r elease strap (toward the front of the vehicle). 2 ...

  • Jeep liberty (2008) - page 127

    DRIVER MEMOR Y SEA T — IF EQUIPPED This feature allows the driver to store up to two differ ent memory profiles, for easy r ecall through a memory switch. Each memory profile contains desired position settings for the driver seat and side mirrors, and a set of desired radio station presets. The memory switch is located on the instrument panel to ...

  • Jeep liberty (2008) - page 128

    NOTE: • For vehicles equipped with an automatic transmission, memory profiles can be set without the vehicle in “P” (Park), but the vehicle must be in “P” (Park) to recall a memory profile. • For vehicles equipped with a manual transmission, the vehicle speed must be at 0 mph (0 km/h) to recall a memory profile. • The Recall Memory wi ...

  • Jeep liberty (2008) - page 129

    NOTE: Y our transmitters can be unlinked to the memory setting by pressing the Set (S) button followed by the Unlock button on the transmitter in Step 4 above. Memory Position Recall NOTE: • For vehicles equipped with an automatic transmission, the vehicle must be in “P” (Park) to recall memory positions. If a recall is attempted when the veh ...

  • Jeep liberty (2008) - page 130

    The distance the driver seat moves depends on where you have the driver seat positioned when you r emove the key from the ignition switch. • When you remove the key fr om the ignition switch, the driver seat will move about 2.4 inches (60 mm) rearwar d if the driver seat position is greater than or equal to 3.5 inches (90 mm) forward of the rear ...

  • Jeep liberty (2008) - page 131

    TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Next, locate the safety latch lever between the grille and hood opening (left of center when facing hood). Push the safety latch lever to the right and then raise the hood. Hood Release U ...

  • Jeep liberty (2008) - page 132

    Use the hood pr op rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood. T o prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center ...

  • Jeep liberty (2008) - page 133

    LIGHTS Exterior & Interior Lighting Control The Multi-Function Control Lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights (if equipped). Headlights & Parking Lights T urn the end o ...

  • Jeep liberty (2008) - page 134

    Automatic Headlights — If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. T o turn the system ON, turn the end of the Multi-Function Control Lever to the (A) AUTO position (thir d detent). When the system is ON, the Headlight T ime Delay feature is also ON. This means the headlights will stay O ...

  • Jeep liberty (2008) - page 135

    interval begins when you turn of f the headlights. Only the headlights will illuminate during this time. If you turn the headlights, or parking lights, or ignition switch on again, the system will cancel the delay . If you turn the headlights off before the ignition, they will turn off in the normal manner . The Headlight delay time is programmable ...

  • Jeep liberty (2008) - page 136

    Fog Lights — If Equipped T o activate the fr ont fog lights, turn on the parking lights or the low beam headlights and pull out on the end of the Multi-Function Control Lever . NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the front fog lights. T urn Signals Move the Mul ...

  • Jeep liberty (2008) - page 137

    Y ou can signal a lane change by moving the lever upward or downward partially without moving beyond the de- tent. If either turn signal indicator has a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, see your autho- rized dealer for service. Highbeam/Lowbeam Select Switch Push ...

  • Jeep liberty (2008) - page 138

    NOTE: If the Multi-Function Control Lever is held in the Flash to Pass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds before activating the Flash to Pass function again. Interior Lights Map/Reading Lights These lights ar e mounted between the sun visors on the overhead console and above the r ear do ...

  • Jeep liberty (2008) - page 139

    Instrument Panel Dimming W ith the parking lights or headlights on, rotate the Dimmer Contr ol upwar d or downwar d to change the brightness of the instrument panel lights. Parade Mode (Daytime Brightness Feature) Rotate the Dimmer Control to the first detent to brighten the odometer and radio display when the parking lights or headlights are on du ...

  • Jeep liberty (2008) - page 140

    WINDSHIELD WIPERS AND W ASHERS The W indshield W iper / W asher Control Lever is located on the right side of the steering column. Rotate the end of the lever to the first detent past the intermittent settings for Low-speed wiper operation, or to the second detent past the intermittent settings for High-speed wiper operation. NOTE: The wipers will ...

  • Jeep liberty (2008) - page 141

    CAUTION! • T urn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than OFF . • In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning of f the engine. If the wiper swit ...

  • Jeep liberty (2008) - page 142

    W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use. Mist Feature Push downward on the W indshield W iper / W asher Co ...

  • Jeep liberty (2008) - page 143

    Headlights with Wipers (A vailable with Auto Headlights Only) When this feature is active, the headlights will turn ON approximately 10 seconds after the wipers are turned on if the Multi-Function Contr ol Lever (on the left side of the steering column) is placed in the (A) AUT O position. In addition, the headlights will turn OFF when the wipers a ...

  • Jeep liberty (2008) - page 144

    NOTE: • The rain-sensing feature will not operate when the wiper speed is in the LOW or HIGH position. • The rain-sensing feature may not function properly when ice or dried salt water is present on the wind- shield. • Use of Rain-X t or products containing wax or silicone may reduce rain sensor performance. • The Rain Sense feature can be ...

  • Jeep liberty (2008) - page 145

    remote start mode is exited. Refer to “Remote Start System” in Section 2 of this manual for information on remote start operation. Windshield W ashers T o use the washer , pull the W indshield W iper / W asher Control lever toward you and hold it for as long as washer spray is desired. If you activate the washer while the wiper contr ol is in t ...

  • Jeep liberty (2008) - page 146

    TIL T STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt control handle is located below the steering wheel at the end of the steering column. T o unlock the steering column, push the control handle downward. T o tilt the steering column, move the steering wheel upward or downward as desired. T o lock t ...

  • Jeep liberty (2008) - page 147

    ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). Electronic Speed Control Operation The speed control lever is located on the right side of the steering wheel. T o Activate: Push and release the (“ON/OFF”) button lo- cated on the end of the speed con ...

  • Jeep liberty (2008) - page 148

    W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it. T o Set At A Desired Speed: When the vehicle r eaches the speed desired, press down ...

  • Jeep liberty (2008) - page 149

    T o Resume Speed: If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set speed. T o do so, push the lever up and release (RESUME ACCEL), and then remove your foot from the accelerator pedal. T o V ary The Speed Setting: When the speed control is ...

  • Jeep liberty (2008) - page 150

    V ehicles equipped with a manual transmission may need to be shifted into a lower gear to climb hills without speed loss. W ARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Y our vehicle could go too fast for the conditions, and you could lose control. An accident could be the result. Don’t use Speed Cont ...

  • Jeep liberty (2008) - page 151

    • When you move the shift lever to “R” (Reverse) position and the Rear Park Assist System is turned off, a single chime will sound once per ignition cycle and the instrument cluster will display “P ARK ASSIST DISABLED.” • The Rear Park Assist System, when on, will MUTE the radio when it is sounding a tone. • If a Rear Park Assist Syst ...

  • Jeep liberty (2008) - page 152

    W ARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before back- ing up. Y ou are responsible for safety and must continue to pay attention to your s ...

  • Jeep liberty (2008) - page 153

    System Operation The system uses four sensors located in the r ear bumper fascia to scan for obstacles up to 79 inches (200 cm) away from the r ear bumper fascia. The warning display located above the rear window provides both visible and audible warnings to indicate the range of the object. The warning display contains two sets of yellow and red L ...

  • Jeep liberty (2008) - page 154

    When the ignition is turned to the ON position, and the system is enabled, the warning display will turn ON all of its LEDs for approximately one second. Then, the system dimly illuminates the two outer most yellow LEDs when it is detecting no obstacles. The Rear Park Assist System is active when the ignition is in the ON position, and the system i ...

  • Jeep liberty (2008) - page 155

    GARAGE DOOR OPENER — IF EQUIPPED HomeLink t r eplaces up to three remote controls (hand held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLink t unit operates off your vehicle’s battery . NOTE: HomeLink t is disabled when the V ehicle Secu- rity Alarm is active. W A ...

  • Jeep liberty (2008) - page 156

    W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while training the transceiver . Exhaust gas can cause seri- ous injury or death. Programming HomeLink T Before Y ou Begin If you have not trained any of the HomeLink t buttons, erase all channels before you begin training. T o do this, pre ...

  • Jeep liberty (2008) - page 157

    NOTE: • Some gate operators and garage door openers may requir e you to replace Step #3 with procedures noted in the “Gate Operator/Canadian Programming” sec- tion. • After training a HomeLink t channel, if the garage door does not operate with HomeLink t and the ga- rage door opener was manufactured after 1995, the garage door opener may h ...

  • Jeep liberty (2008) - page 158

    This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open & close the door). 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer . NOTE: There ar e 30 seconds in which to initiate the ...

  • Jeep liberty (2008) - page 159

    Gate Operator/Canadian Programming Canadian radio-frequency laws requir e transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink t to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators are designed to “time-out” in the same ...

  • Jeep liberty (2008) - page 160

    Reprogramming a Single HomeLink T Button T o r e-program a channel that has been previously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLink t button until the indicator light begins to flash after 20 seconds. Do not release the button. 3. W ithout releasing the button, proceed ...

  • Jeep liberty (2008) - page 161

    General Information This device complies with FCC rules part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference that may be received including interference that may cause undesired operation NOTE: The transmitter has been ...

  • Jeep liberty (2008) - page 162

    W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death. • In an accident, there is a greater risk of being thrown from a vehicle wi ...

  • Jeep liberty (2008) - page 163

    sunroof will automatically r etract. Remove the obstruc- tion if this occurs. Next, press the switch forward and release to Express Close. Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forwar d and hold. This allows the sunroof to move towards the closed position. NOTE: Pinch protection is disa ...

  • Jeep liberty (2008) - page 164

    Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will ca ...

  • Jeep liberty (2008) - page 165

    CAUTION! • Never attempt to open or close the Sky Slider t when it is frozen. W ait until the Sky Slider t is thawed before operating. • Opening the Sky Slider t when damp, wet, or dirty can cause stains, mildew , and damage to the soft-top material and the inside of your vehicle. Make sure the Sky Slider t is dry before opening. • Always clo ...

  • Jeep liberty (2008) - page 166

    Power T op Control The Power T op switch is located between the sun visors on the overhead console. NOTE: The Power T op switch will operate when the ignition switch is turned to the ON or ACC position, and when the accessory delay feature is active. Opening the Sky Slider T Using Automatic Mode Press the switch rearward and release it within 1 ⁄ ...

  • Jeep liberty (2008) - page 167

    NOTE: The Sky Slider t will not open from the front and the rear at the same time. The Sky Slider t must close fully before opening it from the opposite end. Using Operator Mode Press the switch rearwar d and hold it and the Sky Slider t will open from the front and move toward the rear of the vehicle. Press the switch forward and hold it and the S ...

  • Jeep liberty (2008) - page 168

    T o resume the operation from a partially closed position, press and hold the switch once again. Manually The Sky Slider t drive motors are mounted to the roof above the cargo lamp. In the event that your vehicle losses battery power , you can close the Sky Slider t by turning the drive gears in the appropriate motor with a 6 mm Allen wrench. T o d ...

  • Jeep liberty (2008) - page 169

    windows open, then open the front and rear windows together to minimize the buf feting. If the buffeting occurs with the Sky Slider t open, adjust the Sky Slider t opening to minimize the buffeting or open any window . Sky Slider T Maintenance Refer to “Sky Slider t T op Care” under “Maintaining Y our V ehicle” in Section 7 of this manual. ...

  • Jeep liberty (2008) - page 170

    Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories th ...

  • Jeep liberty (2008) - page 171

    A control switch for the outlet is located in the lower switch bank below the climate controls. Press and r elease the switch once to turn on the power outlet. A status indicator in the switch will illuminate in approximately one second to indicate that power is available at the outlet. Press and release the switch again to turn off the power outle ...

  • Jeep liberty (2008) - page 172

    CUP HOLDERS Front and r ear cup holders are located in the center console. Front Cup Holders Rear Cup Holders 172 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 173

    STORAGE Front Storage Compartment The fr ont storage compartment (located on the left side of the instrument panel) can hold cell phones, PDA’s, and other small items. Console Storage Compartment T o open, press the latch and lift the cover . Front Storage Compartment Center Console UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 173 3 I n f o r m a ...

  • Jeep liberty (2008) - page 174

    The center console has a r emovable storage tray , which can hold cell phones, PDA’s, and other small items. CARGO AREA FEA TURES Cargo Load Floor The cargo load floor system has a load capacity of 400 lbs (181 kg). The load floor has a built-in storage bin that can hold a variety of items. The underside of the storage bin cover also contains a p ...

  • Jeep liberty (2008) - page 175

    2. Pull the loops upward and twist them 1 ⁄ 4 turn so that they are parallel to the slots in the storage bin cover . 3. Lift the cover upward over the loops. 4. When done, reinstall the cover with the handle recess facing toward you. NOTE: Y ou can install the cover with either side facing upward. 5. W ith the cover seated in the floor , pull upw ...

  • Jeep liberty (2008) - page 176

    Cargo T ie-Down Hooks & Loops The tie-downs located on cargo ar ea floor should be used to secure loads safely when the vehicle is moving. NOTE: The spring-loaded latches that retain the storage bin cover to the cargo load floor should not be used as cargo tie-downs. Cargo tie-down loops are located on the trim panels. Cargo T ie-Down Hooks Car ...

  • Jeep liberty (2008) - page 177

    W ARNING! • Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. • The weight and position of cargo and passengers can change the vehicle center o ...

  • Jeep liberty (2008) - page 178

    Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy , not to secure loads. It will not prevent car go from shifting or protect passengers from loose cargo. The r emovable retractable cargo ar ea cover mounts in the cargo area behind the top of the rear seats. The cover , when extended, covers the cargo area t ...

  • Jeep liberty (2008) - page 179

    Next, grab the cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) into the notches in the trim panels. Then, lower the cover to position the posts into the bottom of the notches and release the handle. W ARNING! In an accident, a cargo cover loose in the v ...

  • Jeep liberty (2008) - page 180

    REAR WINDOW FEA TURES Rear Window Wiper/W asher — If Equipped The Rear W indow W iper / W asher Control is located on the right side of the steering column. The r otary ring switch on the lever contr ols r ear wiper and washer operation. Rotate the switch upwar d to the first detent to activate the r ear wiper . Rotate the switch upward to the se ...

  • Jeep liberty (2008) - page 181

    CAUTION! • T urn the rear wiper off when driving through an automatic car wash. Damage to the rear wiper may result if the rear wiper control is left in the ON position. • In cold weather , always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine. If the rear wiper switch is lef ...

  • Jeep liberty (2008) - page 182

    CAUTION! • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water . • Do not use scrapers, sharp instruments, or abra- sive windo ...

  • Jeep liberty (2008) - page 183

    CAUTION! T o avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity . Always distribute heavy loads as evenly as possible and secure the load appropriately . Long loads, which extend over the windshield, such as wood panels or surfboards, should be secured to both the front and rear of the vehicle. Place a blan ...

  • Jeep liberty (2008) - page 184

    I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 185

    INSTRUMENT P ANEL AND CONTROLS CONTENTS m Instrument Panel Features ................. 1 8 8 m Instrument Cluster ...................... 1 8 9 m Instrument Cluster Descriptions ............ 1 9 0 m Electronic V ehicle Information Center (EVIC) — If Equipped ........................... 2 0 6 ▫ Electronic V ehicle Information Center (EVIC) Display ...

  • Jeep liberty (2008) - page 186

    m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) ................................ 2 2 2 ▫ Operating Instructions - Radio Mode ....... 2 2 3 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) .... 2 3 1 ▫ Notes On Playing MP3/WMA Files ........ 2 3 3 ▫ List Button (Disc Mod ...

  • Jeep liberty (2008) - page 187

    ▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .................... 2 5 4 ▫ Selecting Satellite Mode ................. 2 5 5 ▫ Satellite Antenna ...................... 2 5 5 ▫ Reception Quality ..................... 2 5 5 ▫ Operating Instructions - Satellite Mode ...... 2 5 5 ▫ Operating Instructions - Hands Free Phon ...

  • Jeep liberty (2008) - page 188

    INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Radio 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Glove Box 10 — Storage Bin* 3 — Storage T ray 7 — Climate Control * If Equipped 4 — Center Air Outlet 8 — Power Outlet 188 INSTRUMENT P ANEL AND CONTROLS I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 189

    INSTRUMENT CLUSTER INSTRUMENT P ANEL AND CONTROLS 189 4 I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 190

    INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The fuel gauge shows level of fuel in tank when ignition switch is in the ON position. (See page 359 for more information.) 2. Fuel Cap Indicator This symbol indicates the side of the vehicle where the fuel cap is located. 3. Low Fuel W arning Light This indicator lights when the fuel level drops to app ...

  • Jeep liberty (2008) - page 191

    significantly under-inflated tire causes the tire to over- heat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tir e tread life, and may af fect the vehicle’s handling and stopping ability . Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’s responsibility to mainta ...

  • Jeep liberty (2008) - page 192

    CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se ...

  • Jeep liberty (2008) - page 193

    6. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission contr ol systems. The light will turn on when the key is in the ON position before engine start. If the light does not turn on when turning the key fr om LOCK or ACC to ON, have the condition check ...

  • Jeep liberty (2008) - page 194

    8. Front Fog Light Indicator Light — If Equipped This light shows when the fog lights are ON. (See page 133 for more information.) 9. Speedometer Shows the vehicle speed. 10. T urn Signal Indicator Light The left or right arr ow will flash in unison with the corresponding front and rear turn signal lights when the turn signal switch is operated. ...

  • Jeep liberty (2008) - page 195

    13. Oil Pressur e W arning Light This light shows low engine oil pressur e. The light will turn on and remain on when the ignition switch is turned from the LOCK or ACC position to the ON position. The light will turn off after the engine is started. If the light does not turn on during starting, have the system checked by an authorized dealer . If ...

  • Jeep liberty (2008) - page 196

    16. 4 LOW Mode Indicator Light — If Equipped This light alerts the driver that the vehicle is in the 4WD LOW mode. In this mode, the front driveshaft and rear driveshaft are mechanically locked together forcing the front and rear wheels to rotate at the same speed. (See page 292 for more information.) 17. Hill Descent Control Indicator Light — ...

  • Jeep liberty (2008) - page 197

    cluster comes on when the ignition switch is turned to the “ON” position. It should go out with the engine running. If the “ESP/BAS W arning Lamp” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system, or both. If this light remains on after the several ignition cycles, and the ve ...

  • Jeep liberty (2008) - page 198

    NOTE: As the coolant temperature gauge approaches 9 H, 9 this indicator will illuminate and a single chime will sound. Further overheating will cause the temperature gauge to pass 9 H. 9 In this case, the indicator will flash continuously and a continuous chime will sound, until the engine is allowed to cool. CAUTION! Driving with a hot cooling sys ...

  • Jeep liberty (2008) - page 199

    the air conditioner is on, turn it off. Also, shift the transmission into “N” (Neutral) and idle the vehicle. If the needle remains on the “H” mark, turn the engine off immediately and call for service. (See page 384 for more information.) NOTE: The gauge pointer will remain near its last reading when the engine is turned off. It will retur ...

  • Jeep liberty (2008) - page 200

    once again to display the outside temperature and com- pass heading in the screen below the speedometer . Refer to “V acuum Fluorescent Display” for details Resetting the T rip Odometer Display the trip mileage that you want to reset, “T rip A” or “T rip B.” Then push and hold the button (approxi- mately 2 seconds) until the display r e ...

  • Jeep liberty (2008) - page 201

    NOTE: If the instrument cluster is equipped with the optional Electr onic V ehicle Information Center (EVIC), then most warnings will display in the EVIC. (See page 206 for more information.) Fuel Cap Fault Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the words “gASCAP” ...

  • Jeep liberty (2008) - page 202

    2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary , repeat this procedur e. 28. Cruise Indicator Light — If Equipped This indicator lights ...

  • Jeep liberty (2008) - page 203

    NOTE: The light may flash momentarily during sharp cornering maneuvers, which can change fluid level con- ditions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate repair is neces- sary . W ARNING! Driving a vehicle with the brake light on is danger- ous. Part of the brake system ...

  • Jeep liberty (2008) - page 204

    32. V ehicle Security Alarm Indicator Light — If Equipped This light will flash rapidly for approximately 16 seconds when the vehicle security system is arming and then flash slowly when the system is armed. The light will also turn on for about three seconds when the ignition is first turned ON. (See page 18 for more information.) 33. Airbag W a ...

  • Jeep liberty (2008) - page 205

    NOTE: Magnetic materials should be kept away from the top of the right rear quarter window . This is where the compass sensor is located. NOTE: The vehicle speed must be at 0 mph (0 km/h) (manual transmission) or the gear selector lever in “P” (Park) (auto transmission) to enter the variance setting mode. T o set the variance, first, turn the i ...

  • Jeep liberty (2008) - page 206

    NOTE: The factory default zone is 8. During program- ming, the zone value will wrap around from zone 15 to zone 1. Calibrating the Compass (Mid Line Cluster Only) If the compass appears erratic, inaccurate, or abnormal, you may wish to calibrate it. However , prior to calibrat- ing the compass, make sur e the pr oper Compass V ariance value is sele ...

  • Jeep liberty (2008) - page 207

    • Compass display • Outside temperature display • T rip computer functions • UConnect™ hands-free communication system dis- plays (If Equipped) • Navigation system screens (If Equipped) • Audio mode display The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: Press and rel ...

  • Jeep liberty (2008) - page 208

    Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the Electronic V ehicle Information Center (EVIC) displays the following messages: • T urn Signal On (with a continuous warning chime) • Left Front T urn Signal Light Out (with a single chime) • Left Rear T urn Signal Light Out (with a single chime) ...

  • Jeep liberty (2008) - page 209

    • Door(s) Ajar (with a single chime if vehicle is in motion) • Liftgate Ajar (with a single chime) • Left Front Low Pressur e (with a single chime). Refer to “T ire Pressure Monitoring System” in Section 5 of this manual. • Left Rear Low Pressure (with a single chime). Refer to “T ire Pressure Monitoring System” in Section 5 of this ...

  • Jeep liberty (2008) - page 210

    Unless reset, this message will continue to display each time you turn the ignition switch to the ON position. T o turn off the message temporarily , press and release the Menu button. T o reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedur e: 1. T urn the ignition switch to the ON posit ...

  • Jeep liberty (2008) - page 211

    history information will be erased, and the averaging will continue from the last fuel average reading before the reset. • Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , accor ...

  • Jeep liberty (2008) - page 212

    seconds of resetting the currently displayed function (>Reset ALL will display during this 3 second window). Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and release the compass button to display one of eight com- pass readings and the outside temperature. Automatic Compass Calibration This compass is ...

  • Jeep liberty (2008) - page 213

    Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some ar eas of the country , the differ ence between magnetic and geographic North is great enough to cause the compass to give false readings. If this occurs, the compass variance must be set using the following procedur e: NOTE: Magnetic materia ...

  • Jeep liberty (2008) - page 214

    1. T urn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and r elease FUNCTION SELECT button until the proper variance zone is selected according to the map. 5. Press and release ...

  • Jeep liberty (2008) - page 215

    The EVIC displays this symbol to indicate an incoming call. The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. The EVIC displays this symbol to indicate that the UConnect™ phone is currently roaming. The EVIC displays this symbol to indicate that you have voice mail. The EVIC displays this symbol to ...

  • Jeep liberty (2008) - page 216

    The EVIC displays this symbol to indicate that a phone connection has been made. The EVIC displays this symbol to indicate that the Connect™ phone is currently not available. Personal Settings (Customer Programmable Features) Personal Settings allows the driver to set and recall features when the vehicle speed is at 0 mph (0 km/h) (manual transmi ...

  • Jeep liberty (2008) - page 217

    details. For vehicles equipped with sales code RER radio, refer to your “Navigation User’s Manual” for UCon- nect™ system operating instructions. Lock Doors Automatically at 15 mph (24 km/h) When ON is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h). T o make your selection, press and r eleas ...

  • Jeep liberty (2008) - page 218

    FUNCTION SELECT button until “ON” or “OFF” ap- pears. Refer to “Driver Memory Seat” in Section 3 of this manual for more information. Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the remote keyless entry “Lock” button is pressed. This feature may be selected with or without the flash lights ...

  • Jeep liberty (2008) - page 219

    selected. T o make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” ap- pears. Headlights On with W ipers (A vailable with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on approxi- mately 10 seconds after the wipers are turned on. The hea ...

  • Jeep liberty (2008) - page 220

    your selection, press and release the FUNCTION SE- LECT button until “Of f,” “45 sec.,” “5 min.,” or “10 min.” appears. Illumination Approach When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter . T o make your selection, ...

  • Jeep liberty (2008) - page 221

    RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent reception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. T o help you understand and sav ...

  • Jeep liberty (2008) - page 222

    45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. NOTE: For vehicles equipped with the EVIC, the radio and steering wheel radio controls (if equipped) will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front door will ...

  • Jeep liberty (2008) - page 223

    Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume control turns continuously (360 degrees) in ...

  • Jeep liberty (2008) - page 224

    Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped). Refer to “Hands-Free Com- munication (UConnect™)” in Section 3 for mor e informa- tion. If your vehicle is not equipped with or this feature is not available on your vehicle, a “UConnect™ Syst ...

  • Jeep liberty (2008) - page 225

    R W/FF (Radio Mode) Pressing the rewind or fast forward button causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM, FM or Satellite (if equipped) frequencies. TUNE Control (Radio Mode) T urn the right side rotary control clockwise to increase or counter-clockwise to decrease the frequ ...

  • Jeep liberty (2008) - page 226

    program format type to be selected. Many radio stations do not currently broadcast Music T ype information. T oggle the Music T ype button to select the following format types: Program T ype 16 Digit-Character Display No program type or un- defined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country For ...

  • Jeep liberty (2008) - page 227

    By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi ...

  • Jeep liberty (2008) - page 228

    • Angle – Repeatedly Pressing SELECT will change the viewing angle if supported by the DVD disc (If Equipped). NOTE: The available selections for each of the above entries varies depending upon the disc. NOTE: These selections can only be made while playing a DVD. • VES Power - Allows you to turn VES ON and OFF (If Equipped). • VES Lock - L ...

  • Jeep liberty (2008) - page 229

    Audio Language — If Equipped Selecting this item will allow the user to choose a default audio language (effective only if language supported by disc). If customer wishes to select a language not listed, then scroll down and select 9 other . 9 Enter the country code using the TUNE contr ol knob to scr oll up and down to select the # and then push ...

  • Jeep liberty (2008) - page 230

    NOTE: The user will have to set these defaults befor e loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-pr eferred settings. AM and FM Buttons (Radio Mode) Press the buttons to select AM or FM Modes. SET Button (Radio ...

  • Jeep liberty (2008) - page 231

    Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs ar e coded by geographic region. These region codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc. Customers may t ...

  • Jeep liberty (2008) - page 232

    Eject Button — Ejecting Compact Disc(s) Press the eject button and the push-button with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show 9 EJECTING DISC 9 when the disc is being ejected and prompt the user to remove the disc. Press and hold the ejec ...

  • Jeep liberty (2008) - page 233

    Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file r ecording media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions. Supported Media (Disc T ypes) The MP3/WMA file r ecording media supported by the radio are CDDA, CD-R, CD-R W , MP3,WMA, DVD V ideo, DVD ...

  • Jeep liberty (2008) - page 234

    If a disc contains multi formats, such as CD audio and mp3/wma tracks, the radio will only play the mp3/wma tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause play- back pr oblems. The radio is designed ...

  • Jeep liberty (2008) - page 235

    Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files. Loading times for playback of MP3/WMA files may be affected by the following: • Media - CD-R W media may take longe ...

  • Jeep liberty (2008) - page 236

    Press and hold the INFO button again for 3 seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3/WMA player , cassette player , or microphone and utilize the vehicle’s audio system to amplify the sou ...

  • Jeep liberty (2008) - page 237

    Operating Instructions - Hands Free Phone (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section. Operating Instructions - V ideo Entertainment System (VES t ) (If Equipped) Refer to sepa ...

  • Jeep liberty (2008) - page 238

    player , USB port, 20 gigabyte Har d Drive (HDD), and the UConnect t hands-free Bluetooth cellular system. NOTE: If your vehicle is not equipped with UConnect t , the unit will respond with a “Feature Not A vailable” message when selecting controls related to this feature. A 6.5-inch touch screen allows easy menu selection, while the Advanced V ...

  • Jeep liberty (2008) - page 239

    camera, and on some models a dual display scr een operation. Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Satellite Radio Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped ...

  • Jeep liberty (2008) - page 240

    Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. When this feature is on, a check mark will appear in the b ...

  • Jeep liberty (2008) - page 241

    6. T o save the new time setting, touch the screen where the word “Save” is displayed. Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off. Proceed as follows to change the current setting: 1. T urn on the system. 2. T ouch the screen where the time is displayed. ...

  • Jeep liberty (2008) - page 242

    Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume control turns contin ...

  • Jeep liberty (2008) - page 243

    If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith UCon- nect” message will display on the radio screen. Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped). Refer to “Hands-Free Com- municat ...

  • Jeep liberty (2008) - page 244

    Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above procedur e, starting at Step 2. INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast from an FM station (FM mode only). R W/FF Pressing the RW (Rewind) or F ...

  • Jeep liberty (2008) - page 245

    Press the rotary TUNE control knob a fifth time and F ADE will display . T urn the TUNE contr ol knob to the left or right to adjust the sound level between the front and rear speakers. Press the rotary TUNE contr ol knob again to exit setting tone, balance, and fade. MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for ...

  • Jeep liberty (2008) - page 246

    Program T ype 16 Digit-Character Display Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports Sports T alk T alk T op 40 T op 40 W eather W eather By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to th ...

  • Jeep liberty (2008) - page 247

    SET Button — T o Set the Push-Button Memory When you are receiving a station that you wish to commit to push-button memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and release that button. If a button is not selected within 5 seconds after p ...

  • Jeep liberty (2008) - page 248

    Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than an inch, a disc may alr eady be loaded and must be ejected before a new disc can be loaded. If you in ...

  • Jeep liberty (2008) - page 249

    If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the right ...

  • Jeep liberty (2008) - page 250

    Press the right SEEK button to move to the next ran- domly selected track. Press the RND button a second time to stop Random Play . Notes On Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recording media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Di ...

  • Jeep liberty (2008) - page 251

    • Level 2: 31 (including a separator 9 . 9 and a 3-character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs cr eated with an option such as 9 keep disc open after writing 9 are most likely multisession discs. The ...

  • Jeep liberty (2008) - page 252

    Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be af fected by the following: • Media - CD-R W media may take longer to load than ...

  • Jeep liberty (2008) - page 253

    Press and hold the INFO button again for 3 seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player , or cassette player , and utilize the vehicle’s audio system to amplify the source and play th ...

  • Jeep liberty (2008) - page 254

    SA TELLITE RADIO (RSC) — IF EQUIPPED (RER/REQ/REN RADIOS ONL Y) Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio. This service offers up to 100 channels of music, sports, news, entertainment, and programming ...

  • Jeep liberty (2008) - page 255

    selected. Pr ess the TUNE control knob and the Sirius ID number will display . The Sirius ID number display will time out in 2 minutes. Press any button on the radio to exit this screen. Selecting Satellite Mode Press the SA T button until 9 SA T 9 appears in the display . A CD may remain in the radio while in the Satellite radio mode. Satellite An ...

  • Jeep liberty (2008) - page 256

    SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it. SCAN Button Pressing ...

  • Jeep liberty (2008) - page 257

    By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset channel. SETUP Button Pressing the SETUP bu ...

  • Jeep liberty (2008) - page 258

    Operating Instructions - Hands Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Video Entertainment System (VES™) (If Equipped) Refer to separate “V ideo Entertainment System (VES™) Guide.” REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system ...

  • Jeep liberty (2008) - page 259

    Left-Hand Switch Functions for Radio Operation • Press the top of the switch to SEEK the next listenable station up from the current setting. • Press the bottom of the switch to SEEK the next listenable station down from the current setting. • Press the button in the center of the switch to tune to the next preset that you have programmed. Le ...

  • Jeep liberty (2008) - page 260

    5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may become too high. CLIMA TE CONTROLS The Air Conditioning and Heating System is designed to make you comfortable in all types of weather . Manual Air Conditioning and Heating System The Manual T emperature Control ...

  • Jeep liberty (2008) - page 261

    Blower Control Use this control to regulate the amount of air for ced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (Off) position. There are four blower speeds. T emperature Control Use this control to regulate the tem- perature of the air inside the passenger compart ...

  • Jeep liberty (2008) - page 262

    • Panel Air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that they are directed toward the rear seat passengers for maximum airflow to the rear . • Bi-Level Air is directed through the panel and floor out- lets. NOTE: For al ...

  • Jeep liberty (2008) - page 263

    NOTE: The air conditioning compr essor operates in Mix and Defrost, or a blend of these modes, even if the Air Conditioning Snowflake button is not pressed. This de- humidifies the air to help dry the windshield. T o improve fuel economy , use these modes only when necessary . • Recirculation Control Use this button to block the flow of outside a ...

  • Jeep liberty (2008) - page 264

    • MAX A/C For maximum cooling use the A/C and r ecirculation buttons at the same time. • Economy Mode If economy mode is desir ed, pr ess the A/C button to turn off the indicator light and the A/C compressor . Then, move the temperature control to the desir ed temperatur e. Automatic T emperature Control (A TC) — If Equipped Automatic Operati ...

  • Jeep liberty (2008) - page 265

    cabin infrared sensor mounted between the sun-visors and from various sensors located throughout the vehicle. The controls on the climate contr ol provide the system with operator input. Other sensors take account of ve- hicle speed, A/C pressur e, outside temperature, and engine cooling temperature. Using all of these inputs, the system automatica ...

  • Jeep liberty (2008) - page 266

    NOTE: • The temperatur e setting can be adjusted at any time without affecting automatic operation. • Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button to flash three times and then turn of f. This indicates that the system is in AUT O mode and requesting the air conditioning is not necessa ...

  • Jeep liberty (2008) - page 267

    INSTRUMENT P ANEL AND CONTROLS 267 4 I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 268

    The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Panel Air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that ...

  • Jeep liberty (2008) - page 269

    • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only . When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn off the air conditioning. An LED in the button illuminates when manual c ...

  • Jeep liberty (2008) - page 270

    • Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation Button. However , under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents. When these conditions ar e present, and the Recirculation Button is pressed, the indicator w ...

  • Jeep liberty (2008) - page 271

    W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed. V ehicle windows tend to fog on the inside in mild but rainy or humi ...

  • Jeep liberty (2008) - page 272

    Control Setting Suggestions for V arious W eather Conditions 272 INSTRUMENT P ANEL AND CONTROLS I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 273

    ST ARTING AND OPERA TING CONTENTS m Starting Procedures ..................... 2 7 7 ▫ Automatic T ransmission ................ 2 7 7 ▫ Manual T ransmission — If Equipped ....... 2 7 7 ▫ Normal Starting ...................... 2 7 7 ▫ Extreme Cold W eather (Below –20°F Or –29°C) ............................. 2 7 8 ▫ If Engine Fails ...

  • Jeep liberty (2008) - page 274

    ▫ MP1522 Command-T rac t T ransfer Case — If Equipped ......................... 2 9 2 ▫ MP3022 Selec-T rac II t T ransfer Case — If Equipped ......................... 2 9 8 m On-Road Driving T ips ................... 3 0 3 m Off-Road Driving T ips ................... 3 0 4 ▫ When T o Use 4WD Low Range ........... 3 0 4 ▫ Driving Through ...

  • Jeep liberty (2008) - page 275

    ▫ T ire Markings ........................ 3 2 9 ▫ T ire Identification Number (TIN) .......... 3 3 2 ▫ T ire Loading And T ire Pressure ........... 3 3 3 m T ires — General Information ............... 3 3 7 ▫ T ire Pressure ......................... 3 3 7 ▫ T ire Inflation Pressures ................. 3 3 8 ▫ T ire Pressures For High S ...

  • Jeep liberty (2008) - page 276

    ▫ Carbon Monoxide W arnings .............. 3 5 8 m Adding Fuel .......................... 3 5 9 ▫ Fuel Filler Cap (Gas Cap) ............... 3 5 9 ▫ Loose Fuel Filler Cap Message ............ 3 6 1 m V ehicle Loading ........................ 3 6 1 ▫ Certification Label ..................... 3 6 1 m T railer T owing ......................... ...

  • Jeep liberty (2008) - page 277

    ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat build up may cause serious injury or death. Automatic T ransmission Start the engine with the selector lever in the ...

  • Jeep liberty (2008) - page 278

    For vehicles equipped with T ip Start, turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds. If this occurs, turn the ...

  • Jeep liberty (2008) - page 279

    W ithout T ip Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold W eather” proce- dures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine. This should clear any excess fuel in case the engine is flooded. CAUTION! T o prevent dama ...

  • Jeep liberty (2008) - page 280

    CAUTION! T o prevent damage to the starter , wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat build up may cause serious injury or death. ENGINE BLOCK HEA TER — IF EQUIPPED Th ...

  • Jeep liberty (2008) - page 281

    AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into “P” (Park) only after the vehicle has come to a complete stop. • Shift into or out of “R” (Reverse) only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from ...

  • Jeep liberty (2008) - page 282

    1. Firmly set the parking brake. 2. Using a flat blade screwdriver , carefully remove the shift lock manual override cover , which is located on the PRNDL bezel. 3. Depress and maintain firm pressure on the brake pedal. 4. Using the screwdriver , reach into the manual override opening. Press and hold the shift lock lever down. 5. Move the shift lev ...

  • Jeep liberty (2008) - page 283

    Brake/T ransmission Interlock System This system prevents you from moving the gear shift out of “P” (Park) and into any gear unless the brake pedal is pressed. Always depr ess the brake pedal first, befor e moving the gear selector out of “P” (Park). 4–Speed Automatic T ransmission Shifting from “D” (Drive) to “P” (Park) or “R? ...

  • Jeep liberty (2008) - page 284

    “P” (Park) This gear position supplements the parking brake by locking the transmission. The engine can be started in this range. Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. Always apply parking brake first, and then place the selector in “P” (Park) position. W ARN ...

  • Jeep liberty (2008) - page 285

    “N” (Neutral) Shift into “N” (Neutral) when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Set the parking brake if you must leave the vehicle. NOTE: T owing the vehicle, coasting, or driving for any other reason with selector lever in “N” (Neutral) can result in severe tr ...

  • Jeep liberty (2008) - page 286

    NOTE: • If the vehicle is started in extremely cold temperatures, the transmission may not shift into Overdrive. It will however , automatically select the most desirable gear for operation at this temperature. Normal operation will resume when the transmission fluid temperature has risen to a suitable level. • If the transmission temperature g ...

  • Jeep liberty (2008) - page 287

    The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate when the switch has been activated. Pressing the switch a second time restor es normal operation. If the “TOW/HAUL” mode is desir ed, the switch must be pressed each time the engine is started. T orque Converter Clutch A feature designed to improve fuel eco ...

  • Jeep liberty (2008) - page 288

    A Reset feature allows the vehicle to be driven to a dealer for service without damaging the transmission. T o reset the transmission, perform the following procedur e: 1. Stop the vehicle. 2. Move the selector lever to the “P” (Park) position. 3. T urn off the engine; be sure to turn the key to the LOCK position. 4. W ait approximately 10 seco ...

  • Jeep liberty (2008) - page 289

    6-Speed Manual T ransmission W ARNING! Y ou or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should al- ways be applied when the driver is not in the vehicle, especially on an incline. Follow the shift pattern on the gearshift knob. NOTE: The backup lights will come on ...

  • Jeep liberty (2008) - page 290

    W ARNING! When parking your vehicle, always leave a manual transmission in first gear and apply the parking brake fully to guard against vehicle movement and possible injury or damage. Never use any gear as a substitute for the parking brake. CAUTION! T o drive as safely as possible and to prolong the life of your manual transmission, follow these ...

  • Jeep liberty (2008) - page 291

    • When “rocking” a stuck vehicle by shifting between a forward gear and reverse, do not spin wheels faster than 15 mph (24 km/h), or drivetrain damage may result. Recommended Manual T ransmission Shifting Speeds The manufacturer recommends that you use the shift speeds listed in the chart below . Manual T ransmission Shift Speeds in MPH (KM/H ...

  • Jeep liberty (2008) - page 292

    CAUTION! Failure to follow the recommended downshifting speeds may cause the engine to over speed and/or damage the clutch disc even if the clutch pedal is depressed. FOUR-WHEEL DRIVE OPERA TION MP1522 Command-T rac T T ransfer Case — If Equipped Operating Information & Precautions The Command-T rac t transfer case pr ovides four posi- tions: ...

  • Jeep liberty (2008) - page 293

    CAUTION! • Do not attempt to make a shift while only the front wheels or rear wheels are spinning. The MP1522 Command-T rac t transfer case is not equipped with a synchronizer and therefore the speed of the front driveshaft and rear drive- shaft must be equal for the shift to take place. Shifting while only the front wheels or rear wheels are spi ...

  • Jeep liberty (2008) - page 294

    Shift Positions The electr onic transfer case switch is located on the center console next to the gear selector lever . 2WD Rear Wheel Drive High Range - Normal street and highway driving. Dry hard surfaced roads. 4WD Lock 4-Wheel-Drive High Range - Locks the front driveshaft and rear driveshaft together and forces the front and rear wheels to r ot ...

  • Jeep liberty (2008) - page 295

    N Neutral - Disengages both the fr ont driveshaft and rear driveshaft from the powertrain. T o be used for flat towing behind another vehicle. Refer to “Recreational T owing” in this section for more information. T ransfer Case Position Indicator Lights The 4WD indicator lights are located in the instr ument cluster . The “N” (Neutral) indi ...

  • Jeep liberty (2008) - page 296

    2WD to 4WD Lock Move the 4WD Control Switch to the desired position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped or in motion. W ith the vehicle in motion, the transfer case will engage / disengage faster if you momentarily release the accelerator pedal after mov- ing the 4WD Contr ol Switch. If the vehicle is stopped, the ...

  • Jeep liberty (2008) - page 297

    Preferr ed Procedur e 1. W ith the engine RUNNING, slow the vehicle speed to 2-3 mph (3-5 km/h). 2. Shift the transmission into “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual trans- mission). 3. While still rolling, move the 4WD Control Switch to the desired position. 4. After the desired position indicator light is ...

  • Jeep liberty (2008) - page 298

    original position, make certain all shift r equirements have been met, wait five (5) seconds, and try the shift again. • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, then the shift will not take place and no position ...

  • Jeep liberty (2008) - page 299

    CAUTION! • The 4WD Low position is intended for loose or slippery road surfaces only . Driving in this posi- tion on dry hard surfaced roads may cause in- creased tire wear and damage to the driveline components. • When operating your vehicle in 4WD LOW , the engine speed is approximately three times that of the 2WD position or 4WD AUTO positio ...

  • Jeep liberty (2008) - page 300

    Shift Positions The electr onic transfer case switch is located on the center console next to the gear selector lever . 2WD Rear Wheel Drive High Range - Normal street and highway driving. Dry hard surfaced roads. 4WD Auto 4-Wheel-Drive Auto High Range – This active on- demand position makes available optimum traction for a wide range of conditio ...

  • Jeep liberty (2008) - page 301

    Interlocking Ignition System” under “Manual T ransmis- sion” or to “Starting Procedur es” in this section for details. N Neutral - Disengages both the fr ont driveshaft and rear driveshaft from the powertrain. T o be used for flat towing behind another vehicle. Refer to “Recreational T owing” in this section for more information. T ra ...

  • Jeep liberty (2008) - page 302

    position, make certain all shift requir ements have been met, wait five (5) seconds, and try the shift again. 2WD to 4WD Auto Move the 4WD Control Switch to the desired position. Shifts between 2WD and 4WD Auto can be done with the vehicle stopped or in motion. If the vehicle is stopped, the ignition switch must be in the ON position with the engin ...

  • Jeep liberty (2008) - page 303

    2. W ith the ignition switch in the ON position and the engine OFF or RUNNING, shift the transmission into “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual transmission). 3. Move the 4WD Control Switch to the desired position. 4. After the desired position indicator light is ON (not flashing), shift the transmission i ...

  • Jeep liberty (2008) - page 304

    conventional 2-wheel drive vehicles any more than low- slung sports cars are designed to perform satisfactorily in off-r oad conditions. If at all possible, avoid sharp turns or abrupt maneuvers. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or vehicle rollover . OFF-ROAD DRIVING TIPS W ...

  • Jeep liberty (2008) - page 305

    caution and maintain a steady controlled speed less than 5 mph (8 km/h) in deep water to minimize wave effects. Flowing W ater If the water is swift flowing and rising (as in storm run-of f) avoid cr ossing until the water level recedes and/or the flow rate is reduced. If you must cross flowing-water , avoid depths in excess of 9 inches. The flowin ...

  • Jeep liberty (2008) - page 306

    Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side. Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4WD Low . Use first gear and 4WD Low for very steep hills. If you stall or begin to lose headway while climbing a steep hill, allow ...

  • Jeep liberty (2008) - page 307

    T raction Downhill Shift the transmission into a low gear and the transfer case to 4WD Low range. Let the vehicle go slowly down the hill with all four wheels turning against engine compression drag. This will permit you to control the vehicle speed and direction. When descending mountains or hills, repeated braking can cause brake fade with loss o ...

  • Jeep liberty (2008) - page 308

    W ARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. Y ou might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary . • If you experience unusual vibration after driving ...

  • Jeep liberty (2008) - page 309

    Be sure the parking brake is firmly set when parked, and the gear selector lever is in the “P” (Park) position (automatic transmission) or “R” (Reverse) or 1st gear (manual transmission). When parking on a hill, you should apply the parking brake befor e placing the gear selector lever in “P” (Park); otherwise, the load on the transmiss ...

  • Jeep liberty (2008) - page 310

    W ARNING! • Always apply the parking brake fully when leav- ing your vehicle or it may roll and cause damage or injury . Also, be certain to leave an automatic transmission in “P” (Park) or a manual transmis- sion in “R” (Reverse) or 1st gear . Failure to do so may allow the vehicle to roll and cause damage or injury . • Leaving childre ...

  • Jeep liberty (2008) - page 311

    W ARNING! Significant over or under inflation of tires or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low-speed self- test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring, you may feel slight pedal movement. The mov ...

  • Jeep liberty (2008) - page 312

    W ARNING! • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • The ABS cannot prevent accidents, including those resulting from excessive speed ...

  • Jeep liberty (2008) - page 313

    • Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping dis- tances, or brake damage. • When descending mountains or hills, r epeated brak- ing can cause brake fade with loss of braking contr ol. A void repeated heavy braking by downshifting the ...

  • Jeep liberty (2008) - page 314

    NOTE: Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that there is a problem with the power steering system. Upon initial start-up in cold weather , the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise shou ...

  • Jeep liberty (2008) - page 315

    T wo additional electronic brake control system options are HDC (Hill Descent Contr ol) and TSC (T railer Sway Control). Y our vehicle may be equipped with one or both of these options. ABS (Anti-Lock Brake System) This system aids the driver in maintaining vehicle contr ol under adverse braking conditions. The system controls hydraulic brake press ...

  • Jeep liberty (2008) - page 316

    TCS (T raction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability . A featur e of the TCS system functions similar to a limited slip differential and contr ...

  • Jeep liberty (2008) - page 317

    W ARNING! BAS (Brake Assist System) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and s ...

  • Jeep liberty (2008) - page 318

    W ARNING! Many factors, such as vehicle loading, road condi- tions, and driving conditions, influence the chance that wheel lift or rollover may occur . ERM (Electronic Roll Mitigation) cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles. Only a safe, attentive, and ski ...

  • Jeep liberty (2008) - page 319

    W ARNING! • TSC (T railer Sway Control) cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommenda- tions. Refer to ”V ehicle Loading” and “T railer T owing” in this section for more information be- fore towing a trailer with your vehicle. • If TSC activates while towing a tra ...

  • Jeep liberty (2008) - page 320

    • For vehicles equipped with an automatic transmission, the HSA will work in r everse gear and all forward gears. The system will not activate if the transmission is in “P” (Park). • For vehicles equipped with a manual transmission, the HSA will work in reverse gear , neutral, and all forward gears. W ARNING! There may be situations where t ...

  • Jeep liberty (2008) - page 321

    W ARNING! • If you use a trailer brake controller with your trailer , the trailer brakes may be activated and deactivated with the brake switch. If so, there may not be enough brake pressure to hold both the vehicle and the trailer on a hill when the brake pedal is released. In order to avoid rolling down an incline while resuming acceleration, m ...

  • Jeep liberty (2008) - page 322

    3. Apply the parking brake. 4. Start the engine. 5. Release the clutch pedal (manual transmission). 6. Rotate the steering wheel 1 ⁄ 2 turn to the left. 7. Press the “ESP OFF” button located in the lower switch bank below the climate control four times within twenty seconds. The “ESP/TCS Indicator” light should turn on and turn off two ti ...

  • Jeep liberty (2008) - page 323

    HDC control speed. Conversely , if more speed is desired during HDC control, the accelerator pedal will increase vehicle speed in the usual manner . When either the brake or the accelerator is released, HDC will control the vehicle at the original set speed. NOTE: HDC is available on vehicles equipped with the MP1522 transfer case. • The transfer ...

  • Jeep liberty (2008) - page 324

    Press the “Hill Descent” button. The “Hill Descent Control Indicator” light in the instru- ment cluster will turn on solid. NOTE: If the transfer case is not in 4WD low range, the “Hill Descent Control Indicator” light will flash for 5 seconds and HDC will not be enabled. Disabling HDC 1. Press the “Hill Descent” button or shift the ...

  • Jeep liberty (2008) - page 325

    accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. W ARNING! ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent accidents, in ...

  • Jeep liberty (2008) - page 326

    Partial Of f — 2WD V ehicles & 4WD V ehicles in 2WD & 4WD High Range The “Partial Off” mode is intended for driving in deep snow , sand, or gravel. This mode raises the threshold for TCS and ESP activation, which allows for more wheel spin than what ESP normally allows. The “ESP OFF” button is located in the lower switch bank belo ...

  • Jeep liberty (2008) - page 327

    mode is over come, turn ESP back on by momentarily depressing the “ESP OFF” button. This may be done while the vehicle is in motion. Full Of f — 4WD V ehicles in 4WD High & 4WD Low Range The “Full Off” mode is intended for off-highway and off-r oad use when ESP stability features could inhibit vehicle maneuverability due to trail cond ...

  • Jeep liberty (2008) - page 328

    W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP is unavailable. In an emer- gency evasive maneuver , the ESP system will not engage to assist in maintaining stability . “Full Off” mode is only intended for off-highway or off-road use. ESP/BAS W arning Light & ESP/TCS Indicator Light The malfunction indica ...

  • Jeep liberty (2008) - page 329

    TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall pr eceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards. T ires designed to this standard have ...

  • Jeep liberty (2008) - page 330

    T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ( ....blank.... ( = Passenger car tire based on European design standards LT = Light T ruck tire based on U.S. design standards T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = Aspect ...

  • Jeep liberty (2008) - page 331

    EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be a ...

  • Jeep liberty (2008) - page 332

    Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If th ...

  • Jeep liberty (2008) - page 333

    Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the to ...

  • Jeep liberty (2008) - page 334

    Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Loadi ...

  • Jeep liberty (2008) - page 335

    5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the avail ...

  • Jeep liberty (2008) - page 336

    336 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 337

    W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, af fect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory ...

  • Jeep liberty (2008) - page 338

    2. Economy— Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will r educe tr ead life resulting in a need for earlier tir e r eplacement. Under inflation also increases tire r olling resistance and results in higher fuel consump- tion. 3. Ride Comfort and V ehicle Stabilit ...

  • Jeep liberty (2008) - page 339

    check tire pressure. Do not make a visual judgement when determining pr oper inflation. Radial tir es may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which cou ...

  • Jeep liberty (2008) - page 340

    Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important. Increased tire pressure and reduced vehicle loading may be required for high-s ...

  • Jeep liberty (2008) - page 341

    W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed. T read Wear Indicators ...

  • Jeep liberty (2008) - page 342

    Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose con ...

  • Jeep liberty (2008) - page 343

    W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, result- ing in changes to steering, handling, and braking of your vehicle. This can cause unpredictable handling and stress to steering a ...

  • Jeep liberty (2008) - page 344

    Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear . TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications. Chains must be the proper size for the vehicle ...

  • Jeep liberty (2008) - page 345

    These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. TIRE ROT A TION RECOMMENDA TIONS T ires on the front and rear axles of vehicles operate at differ ent loads and perform different steering, handling, and braking functions. For these reasons, they wear at unequal rates, and develop irregular wear pattern ...

  • Jeep liberty (2008) - page 346

    TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The T ire Pressure Monitor System (TPMS) will warn the driver of a low tire pressur e based on the vehicle recommended cold placard pressur e. • The tire pressur e will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decre ...

  • Jeep liberty (2008) - page 347

    once the system receives the updated tire pressur es. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. − For example, your vehicle may have a recom- mended cold (parked for mor e than 3 hours) placar d pressur e of 33 psi (227 kPa). If the ambient tempera- ture is 68? ...

  • Jeep liberty (2008) - page 348

    NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflatio ...

  • Jeep liberty (2008) - page 349

    The matching full size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor . The matching full size spare can be used in place of any of the four road tires. The TPMS will only monitor the pressure in the full size spar e when it is used in place of a road tire. Otherwise, a spare with a pr essure below the low- pressu ...

  • Jeep liberty (2008) - page 350

    3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. NOTE: V ehicles with Full Size Spare 1. The matching full size spar e wheel and tire assembly has a tire pressur e monitoring sensor that can be moni- tored by the TPMS. 2. If you install the full siz ...

  • Jeep liberty (2008) - page 351

    the low-pressur e warning limit in any of the four active road tir es. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Premium System — If Equipped The T ire Pressure Monitor System (TPMS) uses wireless technology with wheel rim mounted electr onic sensors to monitor ...

  • Jeep liberty (2008) - page 352

    will sound when tire pr essure is low in one or more of the four active road tires. In addition, the Electronic V ehicle Information Center (EVIC) will display a graphic show- ing the pressure values of each tire with the low tir e pressur e values flashing. Should this occur , you should stop as soon as possible, and inflate the tires with low pr ...

  • Jeep liberty (2008) - page 353

    If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pressure Monitoring T elltale Light will no longer flash, and the 9 CHECK TPM SYS- TEM 9 message will no longer display , and a pr essure value will display in place of the dashes. A system fault can occ ...

  • Jeep liberty (2008) - page 354

    upon the next ignition key cycle, a chime will sound and the TPM T elltale Light will turn ON. In addition, the EVIC will display a Low Pressure message and a graphic showing the low tire pressure value flashing. 3. After driving the vehicle for up to 10 minutes above 15 mph (25 km/h) the TPM T elltale Light will turn OFF , as long as no tire press ...

  • Jeep liberty (2008) - page 355

    5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically . In addition, the TPM T elltale Light will turn OFF and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long as no tire pressure is below the low-pressure warn ...

  • Jeep liberty (2008) - page 356

    high speeds can cause damage and immediate service is requir ed. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experi- ence these symptoms, try another brand of gasoline before considering service for the vehicle. Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline sp ...

  • Jeep liberty (2008) - page 357

    Problems that result from using methanol/gasoline or E85 Ethanol blends are not the responsibility of the manufacturer . While MTBE is an oxygenate made fr om Methanol, it does not have the negative effects of Metha- nol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane. Gasoline ...

  • Jeep liberty (2008) - page 358

    • The use of leaded gas is prohibited by Federal law . Using leaded gasoline can impair engine performance, and damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of ...

  • Jeep liberty (2008) - page 359

    • Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repaired, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gases ...

  • Jeep liberty (2008) - page 360

    CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light to turn on. • T o avoid fuel spillage and overfilling, do not ? ...

  • Jeep liberty (2008) - page 361

    NOTE: • T ighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly . The Malfunction Indicator Light in the in- strument cluster may turn on if the gas cap is not secured properly . Make sure that the gas cap is tight- ened each time the vehicle is refueled. • When the fuel nozzle ? ...

  • Jeep liberty (2008) - page 362

    Gross V ehicle W eight Rating (GVWR) The GVWR is the total permissible weight of your vehicle including driver , passengers, vehicle, options, trailer tongue weight, and cargo. The label also specifies maxi- mum capacities of front and rear axle systems (GA WR). T otal load must be limited, so GVWR, and front and rear GA WR are not exceeded. Payloa ...

  • Jeep liberty (2008) - page 363

    Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle. The front and rear curb weight values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are ad ...

  • Jeep liberty (2008) - page 364

    TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as efficiently and safely as possible. T o maintain warranty coverage, follow the requirements and recommendations in this man ...

  • Jeep liberty (2008) - page 365

    Gross Combination W eight Rating (GCWR) The Gross Combination W eight Rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings in- clude a 150 lbs (68 kg) allowance for the pr esence of a driver). Gross Axle W eight Rating (GA WR) The Gross Axle W eight Rating (GA WR) is the maxi ...

  • Jeep liberty (2008) - page 366

    W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers. W eight-Distributing Hitch A weight- ...

  • Jeep liberty (2008) - page 367

    W eight Distributing Hitch System Improper Adjustment of W eight Distributing System ST ARTING AND OPERA TING 367 5 I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 368

    T railer Hitch Classification Y our vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See your dealer for package content. The ...

  • Jeep liberty (2008) - page 369

    T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Model GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) T ongue Wt. (See Note) 3.7L/6-Speed Manual 4x2 8,500 lbs (3 855 kg) 40 Sq. Ft. (3.72 sq ...

  • Jeep liberty (2008) - page 370

    When T owing T railers with Gross T railer W eight (GTW) between 3,500 Lbs (1 588 kg) and 5,000 Lbs (2 268 kg) The following chart pr ovides maximum trailer weight ratings towable for the following engine/transmission combinations, ONL Y if using a weight distributing hitch. Engine/ T ransmission Model GCWR (Gross Com- bined Wt. Rating) Frontal Are ...

  • Jeep liberty (2008) - page 371

    T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of vehic ...

  • Jeep liberty (2008) - page 372

    NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be consider ed as part of the total load on your vehicle. Refer to the “T ire and Loading Information” placard for the maximum combined weight of occupants and cargo for your v ...

  • Jeep liberty (2008) - page 373

    • When hauling cargo, or towing a trailer , do not overload your vehicle or trailer . Overloading can cause a loss of control, poor performance, or damage to brakes, axle, engine, transmission, steering, suspen- sion, chassis structur e, or tires. • Safety chains must always be used between your vehicle and trailer . Always connect the chains t ...

  • Jeep liberty (2008) - page 374

    − Proper tire inflation pressur es are essential to the safe and satisfactory operation of your vehicle. Refer to “T ires–General Information” in this section for infor - mation on tir e pressures and for proper tire inflation procedur es. − Also, check the trailer tires for proper tire inflation pressur es before trailer usage. − Check ...

  • Jeep liberty (2008) - page 375

    CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances. W ARNING! Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. I ...

  • Jeep liberty (2008) - page 376

    The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. 4 - Pin Connector 7- Pin Connector 376 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 377

    T owing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Automatic T ransmission The “D” range can be selected when to ...

  • Jeep liberty (2008) - page 378

    − Use speed contr ol in flat terrain and with light loads to maximize fuel efficiency . T owing T ips — Cooling System T o r educe potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed. − Highway Drivi ...

  • Jeep liberty (2008) - page 379

    CAUTION! • The Automatic T ransmission must be in “P” (Park) position for recreational towing. The Manual T ransmission (if equipped) must be in gear (for example, 4th gear) for recreational towing. Failure to follow these procedures can cause severe trans- mission and/or transfer case damage. • Internal damage to the transmission or transf ...

  • Jeep liberty (2008) - page 380

    3. T urn the ignition switch to the ON position. 4. Depress the brake pedal. 5. Shift the transmission to “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual trans- mission). 6. Use the point of a ballpoint pen or similar object to depress the recessed transfer case Neutral (N) button for 4 seconds. After the shift is co ...

  • Jeep liberty (2008) - page 381

    • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, the shift will not take place and no position indicator lights will be on or flashing. • Flashing Neutral (N) position indicator light indicates that shift requir emen ...

  • Jeep liberty (2008) - page 382

    indicator light turns off (approximately 1 second). After the Neutral (N) button is released, the transfer case will shift to the position identified by the selector switch. 8. Start the engine. 9. Shift the transmission into “D” (Drive) (automatic transmission) or into 1st gear and momentarily release the clutch (manual transmission) to verify ...

  • Jeep liberty (2008) - page 383

    WHA T T O DO IN EMERGENCIES CONTENTS m If Y our Engine Overheats ................. 3 8 4 m Jacking And T ire Changing ................ 3 8 5 ▫ Jack Location ........................ 3 8 5 ▫ Spare T ire Stowage .................... 3 8 6 ▫ Spare T ire Removal .................... 3 8 6 ▫ Preparations For Jacking ................ 3 8 7 ▫ Ja ...

  • Jeep liberty (2008) - page 384

    IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed. NOTE: There are steps that you can take to slow down an impen ...

  • Jeep liberty (2008) - page 385

    JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • The jack i ...

  • Jeep liberty (2008) - page 386

    Spare Tire Stowage The spare tir e is stowed underneath the rear of the vehicle and is held in place by a cable winch mechanism. Spare Tire Removal Fit the jack handle extension over the drive nut. Use the Lug W rench to rotate the nut counter clockwise until the spare is on the ground with enough slack in the cable to allow you to pull the tire ou ...

  • Jeep liberty (2008) - page 387

    CAUTION! The winch mechanism is designed for use with the jack extension tube only . Use of an air wrench or other power tools is not recommended and they can damage the winch. When the spare is clear , tilt the retainer at the end of the cable, and pull it through the center of the wheel. Preparations For Jacking • Park the vehicle on a firm lev ...

  • Jeep liberty (2008) - page 388

    Jacking Instructions 1. Remove spare tire. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 3. Remove jack and tools from mounting bracket. As- semble the tools by connecting the driver to the exten- sion, and then to the lug wrench. 4. Locate the jack as shown. For the fr ...

  • Jeep liberty (2008) - page 389

    5. Raise the vehicle by turning the jack scr ew to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability . W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident. It could sl ...

  • Jeep liberty (2008) - page 390

    nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 10. Lower the jack to it’s fully closed position. W ARNING! A loose tire or jack, thrown forward in a collision or ha ...

  • Jeep liberty (2008) - page 391

    1. W ear eye protection and r emove all metal jewelry such as watchbands or bracelets that might make an unin- tended electrical contact. 2. When boosting from a battery in another vehicle, park that vehicle within booster cable reach, but without allowing the vehicles to touch. W ARNING! Do not permit vehicles to touch each other as this could est ...

  • Jeep liberty (2008) - page 392

    W ARNING! • Y ou should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze. Do not att ...

  • Jeep liberty (2008) - page 393

    W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle. TOWING A DISABLED VEHICLE Proper towing or lifting equipment is r equired to pre ...

  • Jeep liberty (2008) - page 394

    TOWING METHOD NOTE: The transmission & transfer case must be in “N” Neutral under any towing configuration. Model Flat T owing (all four wheels on the ground) Flat Bed T owing (Recommended for speeds > 30 mph (48 km/h) & distances > 15 miles (24 km) and/or when using a vehicle trailer [All four wheels sus- pended off the ground]) ...

  • Jeep liberty (2008) - page 395

    MAINT AINING YOUR VEHICLE CONTENTS m 3.7L Engine Compartment ................ 3 9 8 m Onboard Diagnostic System — OBD II ........ 3 9 9 ▫ Loose Fuel Filler Cap Message ............ 4 0 0 m Emissions Inspection And Maintenance Programs ............................ 4 0 0 m Replacement Parts ...................... 4 0 2 m Dealer Service .......... ...

  • Jeep liberty (2008) - page 396

    ▫ A/C Air Filter — If Equipped ............ 4 1 2 ▫ Power Steering — Fluid Check ............ 4 1 2 ▫ Driveline And Steering Component Lubrication .......................... 4 1 3 ▫ Body Lubrication ..................... 4 1 3 ▫ W indshield W iper Blades ................ 4 1 3 ▫ W indshield & Rear W indow W ashers ....... 4 1 4 ...

  • Jeep liberty (2008) - page 397

    m Replacement Light Bulbs ................. 4 4 3 m Bulb Replacement ...................... 4 4 3 ▫ Headlight ........................... 4 4 3 ▫ Front T urn Signal And Front Side Marker Lights ............................. 4 4 4 ▫ Front Fog Light ...................... 4 4 5 ▫ Rear T ail/Stop, T urn Signal, And Back-Up Lights ............. ...

  • Jeep liberty (2008) - page 398

    3.7L ENGINE COMP ARTMENT 398 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 399

    ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission contr ol systems. When these systems are operating properly , your vehicle will provide excellent performance and fuel economy , as wel ...

  • Jeep liberty (2008) - page 400

    Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will display in the instrument clus- ter . T ighten the gas cap until a “clicking” sound is heard. This is an indication that the gas cap is properly tight- ened. Press the trip od ...

  • Jeep liberty (2008) - page 401

    2. T urn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over . 4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check. 5. Approximately 15 seconds later , one of two things will happen: a. Th ...

  • Jeep liberty (2008) - page 402

    REPLACEMENT P ARTS Use of genuine Mopar t parts for normal/scheduled maintenance and repairs is highly recommended to in- sure the designed performance. Damage or failures caused by the use of non-Mopar t parts for maintenance and repairs will not be covered by the manufacturer’s warranty . DEALER SERVICE Y our dealer has the qualified service pe ...

  • Jeep liberty (2008) - page 403

    These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level T o assure proper engine lubrication, the engine oil must be maintained at the correct level. The best time to check the engine oil level is about 5 minutes after a fully warmed up engine is shut off or before starting the engine after it has sa ...

  • Jeep liberty (2008) - page 404

    Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or 6 months, whichever occurs fir ...

  • Jeep liberty (2008) - page 405

    Lubricants, which do not have both, the engine oil certification mark and the corr ect SAE viscosity grade number should not be used. Synthetic Engine Oils Y ou may use synthetic engine oils pr ovided the r ecom- mended oil quality requir ements are met, and the recom- mended maintenance intervals for oil and filter changes are followed. Materials ...

  • Jeep liberty (2008) - page 406

    Drive Belts — Check Condition and T ension Belt tension is contr olled by means of an automatic tensioner . Therefore, no belt tension adjustments are requir ed. However , belt and belt tensioner condition should be inspected periodically and r eplaced if re- quired. Improper belt tension can cause belt slippage and failure. Low generator belt te ...

  • Jeep liberty (2008) - page 407

    W ARNING! The air induction system (air cleaner , hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air ...

  • Jeep liberty (2008) - page 408

    CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor - mance, have your vehicle serviced promptly . Contin- ued operation of your vehicle with a severe malfunction could cause the c ...

  • Jeep liberty (2008) - page 409

    T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any ignition coil connec- tors disconnected for prolonged periods. ...

  • Jeep liberty (2008) - page 410

    W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. K ...

  • Jeep liberty (2008) - page 411

    Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerants and co ...

  • Jeep liberty (2008) - page 412

    Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluor ocar- bon (HFC) that is endorsed by the Environmental Pro- tection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by dealers or other service facilities using recovery and recycling equip ...

  • Jeep liberty (2008) - page 413

    If necessary , add fluid to restore to the proper indicated level. W ith a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. NOTE: Upon initial start-up in cold weather , the power steering pump may make noise for a short period of time. This is du ...

  • Jeep liberty (2008) - page 414

    Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to r emove salt or dirt from a dry windshield. A void using the wiper blades to remove frost or ice from the windshield. Make sure that they are not frozen to the glass before turning them on to avoid dama ...

  • Jeep liberty (2008) - page 415

    W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system. Whenever a change is noticed in ...

  • Jeep liberty (2008) - page 416

    Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you ...

  • Jeep liberty (2008) - page 417

    properly , the coolant will begin to drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and r efilled at the intervals shown in the “Maintenance Schedule” in Sec- tion 8 of this manual. If the solution ...

  • Jeep liberty (2008) - page 418

    Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before replacement. T o prevent r educing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle. P ...

  • Jeep liberty (2008) - page 419

    The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat caus ...

  • Jeep liberty (2008) - page 420

    service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (kilometers) ...

  • Jeep liberty (2008) - page 421

    • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation. If r eplacement is ever necessary , install ONL Y the correct type thermostat. Other designs may result in unsatisfactory cooling performance, poor ...

  • Jeep liberty (2008) - page 422

    Brake System In order to assure brake system performance, all brake system components should be inspected periodically . Suggested service intervals can be found in the “Mainte- nance Schedule” in Section 8 of this manual. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on ...

  • Jeep liberty (2008) - page 423

    • Inspect the brake hoses whenever the brake system is serviced and at every engine oil change. Inspect hy- draulic brake hoses for surface cracking, scuf fing, or worn spots. If there is any evidence of cracking, scuffing, or worn spots, the hose should be r eplaced immediately! Eventual deterioration of the hose can take place resulting in a po ...

  • Jeep liberty (2008) - page 424

    W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that has a lower initial boiling point than the recommended product or a brake fluid that is unidentified as to FMVSS specifica- tion may result in sudden brake failure during hard pr ...

  • Jeep liberty (2008) - page 425

    Automatic T ransmission Fluid Level Check Y our vehicle is equipped with a capped dipstick tube that is sealed and it should not be tampered with. Y our authorized dealer has the pr oper tools to ensur e that the fluid level is set properly . CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deteriora ...

  • Jeep liberty (2008) - page 426

    Manual T ransmission — If Equipped Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16” (4.76 mm) below the bottom of the hole. Add fluid, if necessary , to maintain the proper level. Lubricant Selection Use only manufacturer’s recommen ...

  • Jeep liberty (2008) - page 427

    Adding Fluid Fluid should be added only at filler hole until fluid begins to run out of the hole. Draining Fluid First remove fill plug (2), then drain plug (3). Recom- mended tightening torque for drain and fill plugs is 15–25 ft.lbs. (20–34 N·m). CAUTION! Do not over-tighten the plugs. Y ou could damage them and cause a leak. Lubricant Selec ...

  • Jeep liberty (2008) - page 428

    NOTE: Be sure to follow the “police, taxi, fleet, of f-road, or frequent trailer towing” maintenance interval if appli- cable. Front/Rear Axle Fluid Fluid Level Check The lubricant level should be at bottom edge of the oil fill hole. Adding Fluid Add lubricant only at the fill hole and only to the level specified above. Lubricant Selection Use ...

  • Jeep liberty (2008) - page 429

    hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under- body protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint ...

  • Jeep liberty (2008) - page 430

    CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals. Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose ...

  • Jeep liberty (2008) - page 431

    Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned r egularly with a mild soap and water to prevent corrosion. T o remove heavy soil and/or excessive brake dust, use Mopar t Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner . Do not use scouring pad ...

  • Jeep liberty (2008) - page 432

    use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean leather upholstery . Ap- plication of a leather conditioner is not required to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respira ...

  • Jeep liberty (2008) - page 433

    T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses. Glass Surfaces All glass surfaces should be cleane ...

  • Jeep liberty (2008) - page 434

    Replace the belts if they appear frayed or worn or if the buckles do not work properly . SKY SLIDER T TOP CARE Immediate r emoval of any contaminant is r ecommended. Regular washing of the top will enhance its life and appearance, and make successive cleaning easier . Do not subject the top to excessive heat. Frequently vacuum the top and storage c ...

  • Jeep liberty (2008) - page 435

    • Allow the top to dry before opening. V acuuming the top with a wet/dry shop vacuum will decrease the top’s drying time, ensure removal of all dirt, and delete streaks in the material. • Multiple cleanings may be necessary to remove stub- born stains. If stains persist, contact your local dealer- ship for further suggestions. CAUTION! Never ...

  • Jeep liberty (2008) - page 436

    CAUTION! A void getting Scotchguard t on the surrounding weather strips, moldings, paint, or glass. Damage to these items might occur . Weather Strip Care Lubricate the weather strips periodically with Mopar W eather Strip Lubricant (part number 4773427), to keep them soft and pliable. FUSES (INTEGRA TED POWER MODULE) The T otally Integrated Power ...

  • Jeep liberty (2008) - page 437

    Cavity Cartridge Fuse Mini Fuse Description J3 40 Amp Green — Rear Door Modules J4 25 Amp White — Driver Door Node J5 25 Amp White — Passenger Door Node J6 40 Amp Green — Anti-Lock Brake Sys- tem (ABS) Pump/ESP - if equipped J7 30 Amp Pink — Anti-Lock Brake Sys- tem (ABS) V alve/ESP - if equipped J8 40 Amp Green — Power Seats - if equip ...

  • Jeep liberty (2008) - page 438

    Cavity Cartridge Fuse Mini Fuse Description J21 20 Amp Blue — Front W asher/Rear W asher - if equipped J22 25 Amp White — Sunroof Module - if equipped M1 — 15 Amp Blue Stop Light Switch Feed — Center High Mounted Stop Light (CHMSL) M2 — 20 Amp Y ellow T railer Lighting - if equipped M 3 ——— M4 — 10 Amp Red T railer T ow - if equip ...

  • Jeep liberty (2008) - page 439

    Cavity Cartridge Fuse Mini Fuse Description M1 1 — 10 Amp Red Automatic T empera- ture Control (A TC) - if equipped M12 — 30 Amp Green Radio/Amplifier - if equipped M13 — 20 Amp Y ellow Cabin Compartment Node (CCN)/W ireless Control Module (WCM)/Multi- Function Control Switch M14 — — — Cavity Cartridge Fuse Mini Fuse Description M15 — ...

  • Jeep liberty (2008) - page 440

    Cavity Cartridge Fuse Mini Fuse Description M17 — 15 Amp Blue Exterior Lighting — Left Front Park & Side Marker , Left T ail & Running, License Lights M18 — 15 Amp Blue Exterior Lighting — Right Front Park & Side Marker , Right T ail & Running Lights M19 — 25 Amp Natural Auto Shut Down (ASD) #1 & #2 Cavity Cartridge Fu ...

  • Jeep liberty (2008) - page 441

    Cavity Cartridge Fuse Mini Fuse Description M26 — 10 Amp Red Power Mirror Switch/ Driver W indow Switch M27 — 10 Amp Red Ignition Switch/ W ireless Control Module (WCM)/ Steering Column Lock - if equipped M28 — 10 Amp Red Powertrain Control Module (PCM) M29 — 10 Amp Red Occupant Classifica- tion Module (OCM) M30 — 15 Amp Blue Rear W iper ...

  • Jeep liberty (2008) - page 442

    Cavity Cartridge Fuse Mini Fuse Description M37 — 10 Amp Red Anti-Lock Brake Sys- tem (ABS)/Electronic Stability Program (ESP) Module/Stop Light Switch M38 — 25 Amp Natural Door & Liftgate Lock/Unlock Motors CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and full ...

  • Jeep liberty (2008) - page 443

    REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb No. Cargo Light ........................ WL212–2 Overhead Console Light .............. P L W214–2A Reading Light ....................... WL212–2 LIGHT BULBS — Exterior Bulb No. Headlight .......................... 9008 H13 Front Park/T urn Signal Light ............. 3757AK Front Side Mar ...

  • Jeep liberty (2008) - page 444

    CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Install the bulb and connector assembly into the headlight housing and rotate the lock ring clockwise to lock it in place. 7. Close the hood. Front T urn ...

  • Jeep liberty (2008) - page 445

    Front Fog Light 1. Open the hood. 2. Reach behind the headlight housing to access the bulb. 3. Rotate the bulb’s socket counterclockwise, and r emove the bulb and socket assembly from the fog light housing. 4. Pull the bulb out of the socket and insert the replace- ment bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination ...

  • Jeep liberty (2008) - page 446

    5. Remove the two screws that fasten the back plate to the taillight housing. 6. Separate the back plate from the taillight housing. 7. Pull the appropriate bulb(s) out of the back plate and insert the replacement bulb(s). 8. Install the back plate and screws into the taillight housing. 9. Connect the electrical connector . 10. Install the tailligh ...

  • Jeep liberty (2008) - page 447

    FLUID CAP ACITIES U.S. Metric Fuel (approximate) 3.7 Liter Engine 19.5 Gallons 73.8 Liters Engine Oil-W ith Filter SAE 5W -20, API Certified 5 Qts 4.7 Liters Cooling System * Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equivalent. 14 Qts 13 Liters * Includes heater and coolant recovery bottle filled to MAX level. MAINT AINING YOUR VE ...

  • Jeep liberty (2008) - page 448

    FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil meeting the requirements of DaimlerChrysler Material Standard MS-6395. Re ...

  • Jeep liberty (2008) - page 449

    Chassis Component Fluids, Lubricants, and Genuine Parts Automatic T ransmission Mopar t A TF+4, Automatic T ransmission Fluid. Manual T ransmission Mopar t Manual T ransmission Lubricant or equivalent (meeting the re- quirements of DaimlerChrysler Material Standard MS-9224) T ransfer Case Mopar t A TF+4, Automatic T ransmission Fluid. Front Axle SA ...

  • Jeep liberty (2008) - page 450

    I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 451

    MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 4 5 2 m Maintenance Schedule ................... 4 5 2 ▫ Required Maintenance Intervals ........... 4 5 5 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 452

    EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to pr ovide best vehicle performance and reliab ...

  • Jeep liberty (2008) - page 453

    NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under ...

  • Jeep liberty (2008) - page 454

    Once a Month • Check tire pressur e and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , and power steering, and add as needed. • Check all lights and other electrical items for corr ect operation. At Each Oil Chan ...

  • Jeep liberty (2008) - page 455

    Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate the tires. 6,000 10 000 6 If using your vehicle in dusty or off-road conditions, inspect the engine air ...

  • Jeep liberty (2008) - page 456

    Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Inspect the front suspension, tie rod ends and boot seals, and replace if necessary . 24,000 40 000 24 Replace the engine air cleaner filter . 30,000 50 000 30 Change the manual transmission fluid if usi ...

  • Jeep liberty (2008) - page 457

    Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the transfer case fluid if using your vehicle for any of the following: police, taxi, fleet, off-r oad, or fre- quent trailer towing. 60,000 100 000 60 Inspect and replace the PCV valve if necessa ...

  • Jeep liberty (2008) - page 458

    W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. 458 MAINTENANCE SCHEDULES 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a ...

  • Jeep liberty (2008) - page 459

    IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 6 0 ▫ Prepare For The Appointment ............ 4 6 0 ▫ Prepare A List ........................ 4 6 0 ▫ Be Reasonable W ith Requests ............. 4 6 0 m If Y ou Need Assistance ................... 4 6 0 m W arrant ...

  • Jeep liberty (2008) - page 460

    SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s ...

  • Jeep liberty (2008) - page 461

    technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you are still not satisfied, talk to the general manager or owner of the dealer ...

  • Jeep liberty (2008) - page 462

    Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impair ed customer who has access to a TDD or a conventional teletypewriter (TTY) in the ...

  • Jeep liberty (2008) - page 463

    W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of Califor ...

  • Jeep liberty (2008) - page 464

    T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administra- tor , NHTSA, 400 Seventh Str eet, SW ., W ashington, DC 20590. Y ou can also obtain other information about motor vehicle safety from http://www .safercar .gov . ...

  • Jeep liberty (2008) - page 465

    • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and featur es. They show exactly how to find and corr ect pr oblems the first time, using step-by-step troubleshooting and drive ...

  • Jeep liberty (2008) - page 466

    DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car . All Passenger Car T ires Must Con ...

  • Jeep liberty (2008) - page 467

    T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire l ...

  • Jeep liberty (2008) - page 468

    I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 469

    INDEX 10 I n f o r m a t i o n P r o v i d e d b y : ...

  • Jeep liberty (2008) - page 470

    About Y our Brakes ....................... 3 0 8 ABS (Anti-Lock Brake System) ......... 195,310,315 Adding Engine Coolant (Antifreeze) .......... 4 1 8 Adding Fuel ........................... 3 5 9 Adding Rear W asher Fluid ................. 1 8 1 Adding W asher Fluid .................. 145,181 Additives, Fuel ......................... 3 5 7 Air Cl ...

  • Jeep liberty (2008) - page 471

    Auto Unlock, Doors ....................... 3 2 Automatic Dimming Mirror ................. 8 8 Automatic Door Locks ................... 31,32 Automatic Headlights .................... 1 3 4 Automatic Oil Change Indicator .......... 201,209 Automatic T emperature Contr ol (A TC) ......... 2 6 4 Automatic T ransaxle Special Additives ................. ...

  • Jeep liberty (2008) - page 472

    Brake, Parking .......................... 3 0 8 Brake System ........................... 4 2 2 Anti-Lock (ABS) .................... 310,315 Fluid Check ....................... 423,449 Hoses .............................. 4 2 2 Master Cylinder ....................... 4 2 3 Parking ............................. 3 0 8 W arning Light .................. ...

  • Jeep liberty (2008) - page 473

    Chart, T ire Sizing ........................ 3 3 0 Check Engine Light (Malfunction Indicator Light) ................................ 4 0 0 Checking Y our V ehicle For Safety ............. 7 9 Checks, Safety ........................... 7 9 Child Restraint .................... 69,70,74,76 Child Restraint T ether Anchors ............. 73,74 Child Safe ...

  • Jeep liberty (2008) - page 474

    T emperature Gauge ..................... 1 9 8 Corrosion Protection ..................... 4 2 8 Crankcase Emission Control System .......... 4 0 9 Cruise Light ........................... 2 0 2 Cup Holder ............................ 1 7 2 Customer Assistance ..................... 4 6 0 Data Recorder , Event ...................... 6 7 Daytime Brigh ...

  • Jeep liberty (2008) - page 475

    Electrical Power Outlets ................... 1 6 9 Electronic Brake Control System ............. 3 1 4 Anti-Lock Brake System ................. 3 1 5 Brake Assist System .................... 3 1 6 Electronic Roll Mitigation ................ 3 1 7 Electronic Stability Program ............... 3 2 4 T raction Control System ................. 3 1 6 Ele ...

  • Jeep liberty (2008) - page 476

    Overheating .......................... 3 8 4 Starting ............................. 2 7 7 T emperature Gauge ..................... 1 9 8 Engine Oil V iscosity ...................... 4 0 4 Engine Oil V iscosity Chart ................. 4 0 4 Enhanced Accident Response Feature .......... 6 5 Entry System, Illuminated .................. 2 0 Ethanol ... ...

  • Jeep liberty (2008) - page 477

    Power Steering ........................ 4 1 2 Fluids, Lubricants and Genuine Parts .......... 4 4 8 Fog Light Service ........................ 4 4 5 Fog Lights .................... 133,136,194,445 Folding Rear Seat ........................ 1 2 4 Four Wheel Drive Shifting ..................... 292,294,298,300 Systems .......................... 292,2 ...

  • Jeep liberty (2008) - page 478

    Gauges Coolant T emperature .................... 1 9 8 Fuel ................................ 1 9 0 Odometer ........................... 2 0 0 Speedometer ......................... 1 9 4 T achometer .......................... 1 9 5 Gear Ranges ........................ 283,291 General Information ............... 17,26,1 18,355 General Maintenance ... ...

  • Jeep liberty (2008) - page 479

    High Beam/Low Beam Select (Dimmer) Switch . . 137 Hill Descent Control ..................... 3 2 2 Hill Descent Control Indicator ............ 196,322 Hill Start Assist ......................... 3 1 9 Hitches T railer T owing ........................ 3 6 8 Holder , Coin ........................... 1 7 3 Holder , Cup ........................... 1 7 ...

  • Jeep liberty (2008) - page 480

    Jump Starting .......................... 3 9 0 Key , Programming ........................ 1 6 Key , Replacement ........................ 1 6 Key , Sentry (Immobilizer) ................... 1 4 Key-In Reminder ......................... 1 4 Keyless Entry System ...................... 2 0 Keys ................................. 1 2 Lane Change and T urn ...

  • Jeep liberty (2008) - page 481

    Exterior .............................. 8 2 F o g .......................... 136,194,445 Four-Wheel Drive Indicator .... 196,197,200,295,301 Headlight Switch ...................... 1 3 3 Headlights ........................ 133,443 Headlights On Reminder ................. 1 3 5 Headlights On W ith W ipers ............ 134,143 High Beam ............. ...

  • Jeep liberty (2008) - page 482

    Loading V ehicle ......................... 3 6 1 T i r e s ............................... 3 3 3 Locks ................................. 2 9 Auto Unlock .......................... 3 2 Automatic Door ........................ 3 1 Child Protection ........................ 3 3 Door ................................ 2 9 Power Door ....................... ...

  • Jeep liberty (2008) - page 483

    Electric Remote ........................ 9 0 Exterior Folding ........................ 9 0 Heated .............................. 9 1 Outside .............................. 8 9 Rearview ............................. 8 8 V anity ............................... 9 1 Modifications/Alterations, V ehicle ............. 8 Monitor , T ire Pressur e System .. ...

  • Jeep liberty (2008) - page 484

    Oil Filter , Change ........................ 4 0 5 Onboard Diagnostic System .............. 399,400 Opener , Garage Door (HomeLink t ) ........... 1 5 5 Operating Precautions .................... 3 9 9 Outside Rearview Mirrors .................. 8 9 Overdrive .......................... 202,285 Overheating, Engine ................... 198,384 Owner? ...

  • Jeep liberty (2008) - page 485

    Power Steering Fluid .................. 412,449 Pregnant W omen and Seat Belts .............. 5 0 Preparation for Jacking .................... 3 8 7 Pretensioners Seat Belts ............................. 4 7 Programmable Electronic Features ............ 2 1 6 Programming T ransmitters (Remote Keyless Entry) ................................. 2 0 Rad ...

  • Jeep liberty (2008) - page 486

    Remote Keyless Entry (RKE) ................. 2 0 Remote Sound System (Radio) Controls ........ 2 5 8 Remote Starting System .................... 2 7 Replacement Bulbs ....................... 4 4 3 Replacement Keys ........................ 1 6 Replacement Parts ....................... 4 0 2 Replacement T ires ....................... 3 4 2 Reporting ...

  • Jeep liberty (2008) - page 487

    Reminder ............................ 2 0 2 Shoulder Belt Anchorage .................. 4 6 Untwisting Procedur e .................... 4 7 Seats ................................. 1 1 8 Adjustment .......................... 1 1 8 Cleaning ............................ 4 3 2 Easy Entry ........................... 1 2 9 Head Restraints ................. ...

  • Jeep liberty (2008) - page 488

    Side V iew Mirror Adjustment ................ 8 9 Side W indow Demisters (Defrosters) .......... 2 7 1 Signals, T urn ................. 82,136,194,444,445 Sky Slider Power Roof ................. 164,434 Snow Chains (T ire Chains) ................. 3 4 4 Sound Systems (Radio) .................... 2 3 7 Spare T ire ............................. 3 8 6 ...

  • Jeep liberty (2008) - page 489

    Sway Control, T railer ..................... 3 1 8 Synthetic Engine Oil ...................... 4 0 5 System, Navigation ...................... 2 3 7 System, Remote Starting .................... 2 7 T achometer ............................ 1 9 5 T emperature Contr ol, Automatic (A TC) ........ 2 6 4 T emperature Gauge, Engine Coolant .......... 1 9 ...

  • Jeep liberty (2008) - page 490

    T read W ear Indicators ................... 3 4 1 T o Open Hood .......................... 1 3 1 T ongue W eight/T railer W eight .............. 3 7 1 T orque Converter Clutch .................. 2 8 7 T ow/Haul ............................. 2 8 6 T ow/Haul Indicator Light ............... 196,286 T owing ............................ 286,364 Behind a ...

  • Jeep liberty (2008) - page 491

    T ransmitter Programming (Remote Keyless Entry) ................................. 2 0 T ransmitter , Remote Keyless Entry (RKE) ........ 2 0 T read W ear Indicators .................... 3 4 1 T rip Odometer .......................... 2 0 0 T rip Odometer Reset Button ................ 1 9 9 T urn Signals ................ 133,136,194,444,445 UConnect ...

  • Jeep liberty (2008) - page 492

    Wheel Alignment and Balance ............... 3 4 3 Wheel and Wheel T rim .................... 4 3 1 Wheel and Wheel T rim Care ................ 4 3 1 Wheel Mounting ........................ 3 8 9 W ind Buffeting ..................... 39,163,168 W indow Fogging ........................ 2 7 1 W indows .............................. 3 6 Power ......... ...

  • Jeep liberty (2008) - page 493

    INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS / ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Ignition Key RemovalKey-In-Ignition ReminderSENTRY KEY Replacement KeysCustomer Key ProgrammingGeneral InformationSTEERING WHEEL ...

Manufacturer Jeep Category Car

Documents that we receive from a manufacturer of a Jeep liberty (2008) can be divided into several groups. They are, among others:
- Jeep technical drawings
- liberty (2008) manuals
- Jeep product data sheets
- information booklets
- or energy labels Jeep liberty (2008)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jeep liberty (2008).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jeep liberty (2008), service manual, brief instructions and user manuals Jeep liberty (2008). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jeep liberty (2008).

Similar manuals

A complete manual for the device Jeep liberty (2008), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jeep liberty (2008) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jeep liberty (2008).

A complete Jeep manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jeep liberty (2008) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jeep liberty (2008), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jeep liberty (2008), that we can find in the current document
3. Tips how to use the basic functions of the device Jeep liberty (2008) - which should help us in our first steps of using Jeep liberty (2008)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jeep liberty (2008)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jeep liberty (2008) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jeep liberty (2008)?

Use the form below

If you did not solve your problem by using a manual Jeep liberty (2008), ask a question using the form below. If a user had a similar problem with Jeep liberty (2008) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (2)

Сергей

Здравствуйте, где расположены предохранители в салоне ?

Сергей

Здравствуйте, где расположены предохранители в салоне ?