English dropdown-ico

Manual Uniden UDW-10003

24 pages 2.31 mb
Download

Go to site of 24

Summary
  • Uniden UDW-10003 - page 1

    UDW-10003 Video Surveillance System User’s Manual What’s in the Box Portable receiver with 3-inch color LCD display Portable video camera Camera stand Two AC adapters Software CD AV cable USB cable If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! Need Help? Get answers 24/7 at our webs ...

  • Uniden UDW-10003 - page 2

    Important Safety Instructions! This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of re, electric shock and injury to persons, includ ...

  • Uniden UDW-10003 - page 3

    Contents Important Safety Instructions! ........2 Warnings to Parents and Other Users .................................................... 2 For best results: .................................... 3 Getting Started .................................4 Connect the Power .................................... 4 Charge the batteries ....................... ...

  • Uniden UDW-10003 - page 4

    4 Getting Started Connect the Power Connect one AC adapter to the camera’s power input and the other to the receiver’s power input. (The two adapters are exactly the same.) Connect the other end of each adapter to a standard 120 volt AC indoor outlet. Press the POWER button on both the receiver and the camera; the bottom light on the left (the ...

  • Uniden UDW-10003 - page 5

    5 Check the Video Signal As soon as the receiver powers on, it detects the camera and shows the video on the display. The icons at the top of the screen tell you what’s going on with the camera and receiver. The table below shows the different status icons and what they mean. Since the icons appear based on the state of the camera and receiver, y ...

  • Uniden UDW-10003 - page 6

    6 Learning Your System Get to Know the Camera What the buttons do Button What it does POWER Turn the camera on. Press and hold to turn it off. LINK Enter pairing mode. What the lights mean Power Status light State What it means On The camera is on. Off The camera is off. Link Status light State What it means Flashing The camera is in pairing mode. ...

  • Uniden UDW-10003 - page 7

    7 Using the camera mount The camera has a built-in stand so you can place it on any flat surface. If you want to place your camera on a wall or a ceiling (or even if you just want to secure it to a flat surface), you can use the included camera mount. (You might want to bring the receiver along when you mount the camera; it’s much easier to get t ...

  • Uniden UDW-10003 - page 8

    8 Get to Know the Receiver What the buttons do Button What it does MENU/OK Open and close the menu - LEFT In zoom mode: pan to the left side of the zoom area. In the menu: cycle through the available options for the selected menu item. In quad display: go to channel 4. - - - RIGHT In zoom mode: pan to the right side of the zoom area. In the menu: c ...

  • Uniden UDW-10003 - page 9

    9 Button What it does DOWN In zoom mode: pan to the bottom of the zoom area. In the menu: move the cursor down one line. In quad display: go to channel 2. - - - SELECT CAMERA Cycle through the active cameras. From the pairing menu: link to the selected camera. - - ZOOM Enter and exit zoom mode. - POWER Turn the receiver on. Press and hold to turn i ...

  • Uniden UDW-10003 - page 10

    10 Using the Menu Item Use it to Audio Vol Adjust the volume of the audio from the camera. Choose a value from 0 (off) through 20 (maximum). Scan Time Set the length of time the receiver spends on each active camera during a scan (see page 15) or activate quad display (see page 16). CAM1 – CAM4 Turn each of the four camera channels On (enabled) o ...

  • Uniden UDW-10003 - page 11

    11 Using Zoom Mode The receiver can zoom in so you can see the video better. In zoom mode, the receiver increases the pixel size and focuses on the center of the picture. You will also see the ZOOM icon in the upper right corner of the display. Pan and tilt in zoom mode Once in zoom mode, you can pan and tilt the camera to see the outside edges of ...

  • Uniden UDW-10003 - page 12

    12 Connecting to Your TV You can connect the receiver to any standard television with RCA composite video inputs. To use bandwidth efficiently, the system compresses the video signal using Motion-JPEG; the system then digitizes the signal before transmitting it to provide a secure video link. This method is optimized for wireless connections, but i ...

  • Uniden UDW-10003 - page 13

    13 Multiple Camera Features Your receiver supports a total of four active cameras at a time. You can mix and match any of the accessory cameras. (See our website for compatible camera options.) Pairing Cameras Pairing is like introducing the camera and the receiver so they can communicate. You’ll perform the pairing procedure if you want to add a ...

  • Uniden UDW-10003 - page 14

    14 Changing to a Dierent Camera On the receiver, press to cycle through the enabled channels from CAM1 through CAM4 . After the last enabled channel, the receiver goes back to the first camera. Each time you press , the receiver goes to the next enabled channel, regardless of whether there is a camera present on that channel. If there is no came ...

  • Uniden UDW-10003 - page 15

    15 Setting Up a Scan You can have the receiver automatically cycle through the enabled channels. Open the menu, and scroll down to select Scan time . Use RIGHT or LEFT to select the amount of time you want the receiver to stay on each camera. Choose 5 seconds , 10 seconds , 15 seconds , or 20 seconds . To turn off the scan and stay on the current c ...

  • Uniden UDW-10003 - page 16

    16 Using Quad Display In quad display, the receiver puts all four channels on the screen at the same time. The channels appear in the positions shown to the right: If a channel is disabled or there is no signal from the camera, that channel's section of the quad display will be blank. To enter quad display Open the menu. Scroll down to select ...

  • Uniden UDW-10003 - page 17

    17 Solving Problems If you have any trouble with your system, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover. If… Try.. The image on the display is too bright. Adjusting the brightness on the receiver (in the System Setup sub- menu). - The image on the display is too dim. Adjustin ...

  • Uniden UDW-10003 - page 18

    18 If… Try.. None of the buttons on the receiver respond when I press them. Resetting the receiver. - Unstable or Weak Signal If the video seems to lag and or the audio sounds weak, the camera and the receiver do not have a strong, clear signal between them. There are several causes for a weak signal: Possible Cause Solution The camera might be t ...

  • Uniden UDW-10003 - page 19

    19 Signal Level Icon Data Rate (kbps) Frames per second (approx) QVGA (Zoom) VGA (Normal) Perfect 1062~1280 15~20 5~10 Good 725~1062 12~16 3~5 Fair 543~725 8~12 2~4 Low 250~543 0~5 0~1 Zero 0~250 0 0 If the suggestions above don’t provide enough improvement in the the signal quality, you may want to run the camera at QVGA or zoom mode. When the c ...

  • Uniden UDW-10003 - page 20

    20 If the static is only on 1 camera If the static is on all cameras Check near the camera for one of the common interference sources. Try moving the camera away from a suspected source, or try moving the suspected source so it’s not between the camera and the receiver. Try moving closer to the receiver. There is always more noise at the edges of ...

  • Uniden UDW-10003 - page 21

    21 Additional Information Product Specications Radio Frequency Transceiver RF Frequency 2402 Mhz ~ 2483.5 Mhz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Selectable camera channel 4 Data rate 2 Mbps Channel bandwidth 2 MHz Transmitting range 200 meters/600 feet in an open area (line of sight) ...

  • Uniden UDW-10003 - page 22

    22 System Specifications Camera Receiver Low light solution 11 IR LEDs, 1 Low light sensor Low light sensitivity 1-8 lux Picture sensor OV7725 1/4’ Color CMOS Lens F3.6mm H:53 V:40 Output Jacks AV OUT : 3.5 mm headset jack to RCA USB : USB 1.1 or above Polymer-Lithium Battery Warning CAUTION! Risk of explosion if battery is replaced by an incorre ...

  • Uniden UDW-10003 - page 23

    23 FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipmen ...

  • Uniden UDW-10003 - page 24

    One-year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusi ...

Manufacturer Uniden Category Security Camera

Documents that we receive from a manufacturer of a Uniden UDW-10003 can be divided into several groups. They are, among others:
- Uniden technical drawings
- UDW-10003 manuals
- Uniden product data sheets
- information booklets
- or energy labels Uniden UDW-10003
All of them are important, but the most important information from the point of view of use of the device are in the user manual Uniden UDW-10003.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Uniden UDW-10003, service manual, brief instructions and user manuals Uniden UDW-10003. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Uniden UDW-10003.

Similar manuals

A complete manual for the device Uniden UDW-10003, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Uniden UDW-10003 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Uniden UDW-10003.

A complete Uniden manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Uniden UDW-10003 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Uniden UDW-10003, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Uniden UDW-10003, that we can find in the current document
3. Tips how to use the basic functions of the device Uniden UDW-10003 - which should help us in our first steps of using Uniden UDW-10003
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Uniden UDW-10003
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Uniden UDW-10003 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Uniden UDW-10003?

Use the form below

If you did not solve your problem by using a manual Uniden UDW-10003, ask a question using the form below. If a user had a similar problem with Uniden UDW-10003 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)