English dropdown-ico

Manual Optoma EH320UST

108 pages Not applicable
Download

Go to site of 108

Summary
  • Optoma EH320UST - page 1

    1 English T able of Contents ............................ 1 Usage Notice ................................... 2 Safety Information ...............................2 Precautions .........................................3 Eye Safety Warnings ..........................5 Product Features ................................5 Introduction .................... ...

  • Optoma EH320UST - page 2

    2 English Usage Notice The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangl ...

  • Optoma EH320UST - page 3

    3 English Usage Notice Please follow all warnings, precautions and mainte- nance as recommended in this user ’s guide. Please follow all warnings, precautions and mainte- nance as recommended in this user ’s guide. When the lamp  reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. T o rep ...

  • Optoma EH320UST - page 4

    4 English Usage Notice Do: T urn off and unplug the power plug from the AC outlet before  cleaning the product. Use a soft dry cloth with mild detergent to clean the display hous -  ing. Disconnect the power plug from AC outlet if the product is not be -  ing used for a long period of time. Do not: Block the slots and openings on the unit ...

  • Optoma EH320UST - page 5

    5 English Usage Notice Avoid staring/facing directly into the projector beam at all  times. Keep your back to the beam as much as possible. When projector is used in a classroom, adequately super -  vise students when they are asked to point out something on the screen. In order to minimize the lamp power, use room blinds to  reduce ambien ...

  • Optoma EH320UST - page 6

    6 English Introduction Optional  accessories vary depending on model, speci ca- tion and region. Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact Optoma customer service. Package Overview Standard Accessories Freeze Power Switch L R Keystone Volume Page - - + - + 1 2 ...

  • Optoma EH320UST - page 7

    7 English Introduction Product Overview Main Unit Do not block  projector in/out air vents. Lamp Cover 1. Control Panel 2. Focus Switch 3. IR Receiver 4. Input/Output Connections 5. Lens 6. Power Socket 7. Speaker 8. IR Camera (Only for 9. interactive version) 2 1 6 5 4 3 7 9 8 ...

  • Optoma EH320UST - page 8

    8 English Introduction Control Panel 1 3 5 Power 1. Source 2. Lamp Indicator 3. T emperature (T emp) Indicator 4. IR Receiver 5. 2 4 16 17 15 14 ...

  • Optoma EH320UST - page 9

    9 English Introduction Input/Output Connections Power Socket 1. Kensington 2. TM Lock Port RJ45 Connector 3. USB Power Connector (5V/2A Max.) 4. 3D Sync Connector (5V) 5. RS-232C Connector (9-pin DIN T ype) 6. 12V Audio Out Connector 7. USB Connector (Connect to PC for Remote Mouse 8. function) VGA-Out/VGA2-In Connector 9. VGA1-In/YPbPr Connector ( ...

  • Optoma EH320UST - page 10

    10 English Introduction Remote Control Power on / off 1. Freeze 2. Display blank / audio 3. mute Mouse left click 4. Enter 5. Laser 6. Page - 7. Keystone - / + 8. Menu 9. Aspect ratio 10. HDMI 1 1. User 2 12. User 1 13. Source 14. Brightness mode 15. Mouse on / off 16. Mute 17. Mouse right click 18. Four directional 19. select keys Page + 20. V olu ...

  • Optoma EH320UST - page 11

    11 English Installation Connecting a Computer/Notebook Connecting to the Projector Due to the  difference in applications for each country , some regions may have different accessories. (*)  Optional accessory 1.............................................................................................. RS-232C cable 2....................... ...

  • Optoma EH320UST - page 12

    12 English Installation Connecting a Video source Due to the  difference in applications for each country , some regions may have different accessories. (*)  Optional accessory E62405SP R 5 1 2 Audio output 3D glasses 3 4 6 DVD player , Set-top box, HDTV receiver 1.............................................................................. ...

  • Optoma EH320UST - page 13

    13 English Installation Connect to 3D V ideo Devices The 3D video  source device must be powered on before the 3D projector . If input video  is normal 2D, please press “3D Format” and switch to “Auto”. If “SBS Mode”  is active, 2D video content will not display correctly . Once you have connected your devices together with HDM ...

  • Optoma EH320UST - page 14

    14 English Installation 3D Broadcast 3D Blu-ray™ Disc 3D Console Games SKY+HD, cable/satellite box 3D Blu-ray™ Player PlayStation ® 3 3D DLP ® Link™ Glasses Full 3D 1080p DLP ® Projector 3D RF Glasses 3D Emitter ...

  • Optoma EH320UST - page 15

    15 English Installation T o turn ON 3D glasses. 1. V erify that 3D content is being sent to the projector and 2. signal is compatible with projector specications. T urn on the “3D Mode” (Off/DLP-Link/VESA 3D - depend - 3. ing on which type of glasses you are using) of the 3D projector . The option is located in the “Display” section of t ...

  • Optoma EH320UST - page 16

    16 English Installation Powering On/Off the Projector T urn on the projec-  tor  rst and then select the signal sources. (*) Optional  accessory . Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the On/Standby LED will turn Red. 2. T urn on the lamp by pressing “ ” button either on the top ...

  • Optoma EH320UST - page 17

    17 English Installation Powering Off the Projector 1. Press the “ ” button on the remote control or on the Control Panel to turn off the projector . The following message will be displayed on the screen. Power Off? Press Power again Press the “ ” button again to conrm otherwise the message will disappear after 15 seconds. When you press ...

  • Optoma EH320UST - page 18

    18 English Installation Contact the  nearest service center if the projector displays these symptoms. See pages 105- 106 for more information. W arning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown:  “LAMP” LED indicator is lit red and if “On/Standby” indicator ashes red.  ? ...

  • Optoma EH320UST - page 19

    19 English Installation Adjusting the Projected Image Adjusting the Projector ’ s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector . 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. ...

  • Optoma EH320UST - page 20

    20 English Installation Adjusting the Projector ’ s Focus T o focus the image, slide the focus switch until the image is clear .  Standard throw series (XGA): The projector will focus at dis- tances from 1.55 to 2.21 feet (0.47 to 0.68 meters) counted from the center of lens..  Standard throw series (WXGA): The projector will focus at dista ...

  • Optoma EH320UST - page 21

    21 English Installation a b p c m g d (H) (W) p a b c m g d (H) (W) V ariables: “ a ”: Image Offset (m) from the center of the lens to the top of the vertical image. “ b ”: Distance from the center of the lens to the bottom of the projector . “ c ”: Distance between the wall (projection surface) to the back of the projector . “ d ”: ...

  • Optoma EH320UST - page 22

    22 English Installation a b c d W H g m P Image Offset from the center of the lens to the top of the vertical image (m) Distance from center of lens to the bottom of projector (m) Distance between the wall (projection surface) to the back of projector (m) Image Diagonal (inch) Width of Image Size Height of Im - age Size Distance between the center ...

  • Optoma EH320UST - page 23

    23 English User Controls Control Panel Control Panel & Remote Control Using the Control Panel POWER Refer to the “Power On/Off the Projector” section on pages 16-17. SOURCE Press to select an input signal. Lamp LED Indicate the projector ’s lamp status. T emp LED Indicate the projector ’s temperature status. IR Receiever Receives infrar ...

  • Optoma EH320UST - page 24

    24 English User Controls Remote Control Using the Remote Control Power Press to turn on / off the projector . Switch Press to switch the USB mouse on / off. Display blank / audio mute Press to hide / unhide the screen picture and turn off / on audio. Freeze Press to freeze the projector image. Mute Press to momentarily turn off / on the audio. Mous ...

  • Optoma EH320UST - page 25

    25 English User Controls 3D / 3 Press to manually select a 3D mode that ` matches your 3D content. Use as numeric keypad number “3”. ` HDMI / 4 Press to choose HDMI source. ` Use as numeric keypad number “4”. ` VGA / 5 Press to choose VGA source. ` Use as numeric keypad number “5”. ` Video / 6 Press to choose composite video source. ` U ...

  • Optoma EH320UST - page 26

    26 English User Controls Installing Batteries T wo size AAA batteries are supplied for Remote Control. Replace only with the same or equivalent type recommended by the manufacturer . CAUTION Improper use of batteries can result in chemical leakage or explo- sion. Be sure to follow the instructions below . Do not mix batteries of different types. Di ...

  • Optoma EH320UST - page 27

    27 English User Controls Sub Menu Settings Main Menu The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Control Panel. 2 When OSD is dis ...

  • Optoma EH320UST - page 28

    28 English User Controls Menu T ree Main Menu Sub Menu Advanced Menu Parameter Single Item in the Menu Value or Default Notes IMAGE Display Mode Presentation / Bright / Movie / sRGB / Blackboard / DICOM SIM. / 3D / User Each mode can adjust and save to user mode. Brightness -50~ +50 Contrast -50~ +50 Sharpness 1~ 15 Color -50~ +50 Tint -50~ +50 Adv ...

  • Optoma EH320UST - page 29

    29 English User Controls Main Menu Sub Menu Advanced Menu Parameter Single Item in the Menu Value or Default Notes IMAGE Advanced Color Matching Cyan Hue/ Saturation /Gain/ Exit -50~ +50 Magenta Hue/ Saturation /Gain/ Exit -50~ +50 Yellow Hue/ Saturation /Gain/ Exit -50~ +50 White R/G/B/Exit -50~ +50 Reset To reset current source with current displ ...

  • Optoma EH320UST - page 30

    30 English User Controls Main Menu Sub Menu Advanced Menu Parameter Single Item in the Menu Value or Default Notes SETUP Language English / Deutsch / Français / Italiano / Español / Português / Polski / Nederlands / Svenska / Norsk/Dansk / Suomi / Ελληνικά/ ᖅᡝϛМ / ৿࿒፩ၭ / 日本語 / 㘆ท♞ / Русский / Magyar / Če ...

  • Optoma EH320UST - page 31

    31 English User Controls Main Menu Sub Menu Advanced Menu Parameter Single Item in the Menu Value or Default Notes SETUP Security Security Setting On/Off Off Security Timer Month 0~12 Password is required if “Security” is selected. Day 0~30 Hour 0~24 Exit Change Password Exit Signal (RGB) Frequency -5~+5 Depends on signal Phase 0~63 H. Position ...

  • Optoma EH320UST - page 32

    32 English User Controls Main Menu Sub Menu Advanced Menu Parameter Single Item in the Menu Value or Default Notes SETUP Network LAN Settings Network Status Read-Only Never time-out on this page. DHCP On/Off IP Address Subnet Mask Gateway DNS Apply Yes/No MAC Address Read-Only Exit Control Settings Crestron On/Off On Extron On/Off On PJ Link On/Off ...

  • Optoma EH320UST - page 33

    33 English User Controls Main Menu Sub Menu Advanced Menu Parameter Single Item in the Menu Value or Default Notes OPTIONS Advanced Direct Power On On/Off Signal Power on On/Off Auto Power Off (min) 0~180 Sleep Timer (min) 0~990 Power Mode ( Standby) Active/ Eco. Eco. Quick Resume On/Off Off Remote Settings User 1 HDMI2/VGA2/Test Pattern/LAN/Bright ...

  • Optoma EH320UST - page 34

    34 English User Controls Main Menu Sub Menu Advanced Menu Parameter Single Item in the Menu Value or Default Notes OPTIONS Reset Current/All The denition of Current: To reset all OSD settings to be default for current source and current timing. The denition of All: To reset all OSD settings to be default for all source and all timing.. ...

  • Optoma EH320UST - page 35

    35 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: This mode is suitable for showing in front of public ` in connection to the PC. Bright: Maximum brightness from PC input. ` Movie: This mode is suitable for watching video. ` User: Memorize user ’s settings. ` Blackboard ...

  • Optoma EH320UST - page 36

    36 English User Controls Presentation Bright Movie Blackboard DICOM SIM. sRGB User User Brightness Adjust the brightness of the image. Press the ` to darken image. Press the► ` to lighten the image. Brightness Contrast The contrast controls the degree of difference between the light - est and darkest parts of the picture. Press the ` to decrease ...

  • Optoma EH320UST - page 37

    37 English User Controls Sharpness Adjust the sharpness of the image. Press the ` to decrease the sharpness. Press the ` to increase the sharpness. Sharpness Color Adjust a video image from black and white to fully saturated color . Press the ` to decrease the amount of saturation in the im - age. Press the ` to increase the amount of saturation in ...

  • Optoma EH320UST - page 38

    38 English User Controls IMAGE | Advanced Noise Reduction Selects a lter sensitivity to noise. A higher value may improve noisy sources, but it will soften the image. Press the ` to decrease the noise in the image. Press the ` to increase the noise in the image. Noise Reduction Gamma This allows you to set up gamma curve type. After the initial ...

  • Optoma EH320UST - page 39

    39 English User Controls BrilliantColor™ This adjustable item utilizes a new color-processing algorithm and enhancements to enable higher brightness while providing true, more vibrant colors in picture. Press the ` to stronger enhance the image. Press the ` to less enhance the image. Brilliant Color RGB Gain/Bias This settings allows to congur ...

  • Optoma EH320UST - page 40

    40 English User Controls Color Matching Press the into the next menu and then use or or or to select the item. Color Matching Red Green Blue White Reset Exit Y ellow Magenta Cyan Red ` : Press the or to select Hue, Saturation and Gain Colors. Then press the or to decrease or increase the value respectively . Red Hue Saturation Gain Exit Cyan ` : Pr ...

  • Optoma EH320UST - page 41

    41 English User Controls Green ` : Press the or to select Hue, Saturation and Gain Colors. Then press the or to decrease or increase the value respectively . Green Hue Saturation Gain Exit Magenta ` : Press the or to select Hue, Saturation and Gain Colors. Then press the or to decrease or increase the value respectively . Magenta Hue Saturation Gai ...

  • Optoma EH320UST - page 42

    42 English User Controls White ` : Press the or to select Hue, Saturation and Gain Colors. Then press the or to decrease or increase the value respectively . White Hue Saturation Gain Exit Reset: Choose “ ` Reset” to return the factory default settings for color adjustments. Color Space Press the or to select an appropriate color matrix type fr ...

  • Optoma EH320UST - page 43

    43 English User Controls DISPLA Y Format Press the or to choose your desired aspect ratio between 4:3, 16:9/16:10 (WXGA), LBX, Native, and Auto. Format XGA 4:3: This format is for 4:3 input sources. ` 16:9: This format is for 16:9 input sources, like HDTV and ` DVD enhanced for Wide screen TV . Native: This format displays the original image withou ...

  • Optoma EH320UST - page 44

    44 English User Controls WXGA 4:3: ` This format is for 4:3 input sources . 16:9: This format is for 16:9 input sources, like HDTV and ` DVD enhanced for Wide screen TV . 16:10: This format is for 16:10 input sources, like widescreen ` laptops. LBX: This format is for non-16x9, letterbox source and for us - ` ers who use external 16x9 lens to displ ...

  • Optoma EH320UST - page 45

    45 English User Controls 16:10 Screen 480i/p 576i/p 1080i/p 720p PC 4:3 Scale to 1066 x 800 16:10 Scale to 1280 x 800 LBX Scale to 1280 x 960, in order to get the central 1280 x 800 image displayed on the screen. Native 1:1 mapping centered 1:1 map - ping display 1280 x 800 1280 x 720 centered 1:1 mapping centered Auto Input source will be t int ...

  • Optoma EH320UST - page 46

    46 English User Controls Zoom Press the ` to reduce the size of an image. Press the ` to magnify an image on the projection screen. Zoom Edge Mask Edge mask the image to remove video encoding noise on the edge of video source. Press the ` to decrease the edge mask in image. Press the ` to increase the edge mask in image. Edge Mask Image Shift Press ...

  • Optoma EH320UST - page 47

    47 English User Controls V Keystone Press the or to adjust image distortion vertically and make a squarer image. V . Keystone Exit Choose “Exit” to exit the menu. ...

  • Optoma EH320UST - page 48

    48 English User Controls 3D Format is only  supported on 3D T iming on page 94. “3D Format” is  only supported on non-HDMI 1.4a 3D timing. DISPLA Y | 3D 3D Mode Off: ` Select “Off” to turn of f 3D mode. Press the ` or to select the 3D mode. 3D Mode DLP - Link DLP-Link: Select “DLP-Link” to use optimized settings for DLP ` Link 3D ...

  • Optoma EH320UST - page 49

    49 English User Controls 3D Format Press the ` or to select 3D format. 3D Format Frame Sequential Auto: When a 3D identication signal is detected, the 3D for - ` mat is selected automatically . SBS: Display 3D signal in “Side-by-Side” format. ` T op and Bottom: Display 3D signal in “T op and Bottom” format. ` Frame Sequential: Display 3D ...

  • Optoma EH320UST - page 50

    50 English User Controls SETUP Exit English SETUP Language Projection Menu Location Audio Settings Sceen T ype Security Projector ID Signal (RGB) Advanced Network Signal (Video) Advanced Network Exit ...

  • Optoma EH320UST - page 51

    51 English User Controls Language Choose the multilingual OSD menu. Press into the sub menu and then press the or or or ►key to select your pre - ferred language. Press “Enter” to nalize the selection. Rear-Desktop and  Rear-Ceiling are to be used with a translucent screen. Projection Press the or or or ►key to select the preferred pr ...

  • Optoma EH320UST - page 52

    52 English User Controls Menu Location Press the or or or key to select the preferred menu location. Menu Location Exit Screen T ype Press the or to c hoose the screen type from16:10* or 16:9. Screen T ype Projector ID ID denition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Press the ` to decrease ...

  • Optoma EH320UST - page 53

    53 English User Controls SETUP | Audio Settings Internal Speaker Choose the “On” or “Off” to turn on or of f the internal speaker . Internal Speaker Off On Mute Choose the “On” to turn mute on. ` Choose the “Off” to turn mute of f. ` Mute Off On V olume Press the ` to decrease the volume. Press the ` to increase the volume. V olume ...

  • Optoma EH320UST - page 54

    54 English User Controls Audio Input The default audio settings are on the back panel of the projector . Use this option to reassign any of the Audio Inputs (1 or 2) to the current image source. Each Audio input can be assigned to more than one video source. Press ` or to select audio input. Audio Input Default Default. ` Audio 1: (RCA) for Composi ...

  • Optoma EH320UST - page 55

    55 English User Controls SETUP | Security Security On: Choose “On” to use security verication when the turning ` on the projector . Off: Choose “Of f” to be able to switch on the projector without ` password verication. Security Off On Security T imer Can be select the time (Month/Day/Hour) function to set the number of hours the proj ...

  • Optoma EH320UST - page 56

    56 English User Controls Change Password First time: ` Press “Enter” key to set the password. 1. The password has to be 4 digits. 2. Use number button on the remote or on-screen numeric key - 3. pad to enter your new password and then press “Enter” key to conrm your password. Change Password: ` (If your remote does not have a number keyp ...

  • Optoma EH320UST - page 57

    57 English User Controls SETUP | Network SETUP Network LAN Settings Control Settings Exit LAN Settings Loading network conguration Please wait... For more information on LAN Settings, refer to page 58-59, and 62-69 Control Settings For more information on Control Settings, refer to page 60-69. ...

  • Optoma EH320UST - page 58

    58 English User Controls SETUP | Network|LAN Settings Network Status Display the network connection status (read-only). MAC Address Display the MAC address (read-only). DHCP DHCP Off On On: Projector will obtain an IP address automatically from your ` network. Off: T o assign IP , Subnet Mask, Gateway and DNS ` conguration manually . Exiting OSD ...

  • Optoma EH320UST - page 59

    59 English User Controls Subnet Mask Subnet Mask Display subnet mask number . Gateway Gateway Display the default gateway of the network connected to the projector . DNS DNS Display DNS number . Apply Press and then choose “Y es” to apply the selection. Apply No Y es Exit Choose “Exit” to exit the menu. ...

  • Optoma EH320UST - page 60

    60 English User Controls SETUP | Network|Control Settings Crestron Crestron Off On Use this function to select the network function (port: 41794). For more information, please visit http://www .crestron.com and www .crestron.com/getroomview . On: The Crestron function is active. ` Off: The Crestron function is inactive. ` Extron Extron Off On Use t ...

  • Optoma EH320UST - page 61

    61 English User Controls AMX Device Discovery AMX Device Discovery Off On Use this function to select the network function (port: 1023). On: The AMX Discovery function is active. ` Off: The AMX Discovery function is inactive. ` T elnet T elnet Off On Use this function to select the network function (port: 23). On: T elnet is enabled. ` Off: T elnet ...

  • Optoma EH320UST - page 62

    62 English User Controls LAN_RJ45 Function For simplicity and ease of operation, the W320UST projector provides diverse networking and remote management features. The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off, Brightness and Contrast settings. Also, projector status information, such as: Video- Sour ...

  • Optoma EH320UST - page 63

    63 English User Controls This projector supports all commands of PJLink Class1 (V ersion 1.00). http://pjlink.jbmia.or .jp/english / For more detailed information about the various types of exter- nal devices which can be connected to the LAN/RJ45 port and remote/control the project, as well as the supported commands for these external devices, ple ...

  • Optoma EH320UST - page 64

    64 English User Controls Right-click on the Local Area Connection, and select Property . 3. In the Properties window , select the General tab, and select 4. Internet Protocol (TCP/IP). Click “Properties”. 5. ...

  • Optoma EH320UST - page 65

    65 English User Controls T ype in the IP address and Subnet mask, then press “OK”. 6. Press the “Menu” button on the projector . 7. Use 8. keys to select SETUP > Network > LAN Settings. After getting into LAN Settings, input the following connection 9. parameters: DHCP: Off ` IP Address: 10.10.10.10 ` Subnet Mask: 255.255.255.255 ` Ga ...

  • Optoma EH320UST - page 66

    66 English User Controls Press “Enter”. 13. The projector is setup for remote management. The LAN/RJ45 function displays as follows: Information Page Main Page ...

  • Optoma EH320UST - page 67

    67 English User Controls T ool Page Contact IT Helpdesk RS232 by T elnet Function There is alternative RS232 command control way , in projector so called “RS232 by TELNET” for LAN/RJ45 interface. ...

  • Optoma EH320UST - page 68

    68 English User Controls Quick Start-Guide for “RS232 by T elnet” Check and get the IP address on OSD of the projector . ` Make sure that the PC/laptop can access the web-page of the ` projector . Make sure that "Windows Firewall" setting is set disabled in ` case of "TELNET" function ltering out by PC/laptop. . Start > ...

  • Optoma EH320UST - page 69

    69 English User Controls Specication for “RS232 by TELENT”: T elnet: TCP . 1. T elnet port: 23 (for more detail, kindly please get contact with 2. the service agent or team). T elnet utility: Windows “TELNET .exe” (console mode). 3. Disconnection for RS232-by-T elnet control normally: Close 4. Windows T elnet utility directly after TELNE ...

  • Optoma EH320UST - page 70

    70 English User Controls SETUP | Signal (RGB) Automatic SETUP Signal (RGB) Automatic Disable Exit Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time pr ...

  • Optoma EH320UST - page 71

    71 English User Controls Frequency Frequency Change the display data frequency to match the frequency of your computer ’s graphic card. Use this function only if the image appears to icker vertically . Press the ` to decrease the frequency . Press the ` to increase the frequency . H. Position (Horizontal Position) H. Position Press the ` to mo ...

  • Optoma EH320UST - page 72

    72 English User Controls White Level White Level Adjust the overall white level of the projected image by applying a gain to the input image. Press the ` to decrease the white level. Press the ` to increase the white level. Black Level Black Level Adjust the overall black level of the projected image by applying a offset to the input image. Press t ...

  • Optoma EH320UST - page 73

    73 English User Controls Logo Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Neutral: Logo is not displayed on startup screen. ` Optoma: Optoma logo is displayed on startup screen. ` User: User-dened background is shown on startup screen. ` Logo Captu ...

  • Optoma EH320UST - page 74

    74 English User Controls Choose “On ” and “Y es ” to capture an image of the picture cur - rently displayed on screen. Closed Captioning Closed Captioning Off Closed Captioning is a text version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and wa ...

  • Optoma EH320UST - page 75

    75 English User Controls Input Source Use this option to enable/disable input sources. Press ► to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will only search for inputs that are enabled. Input Source Video Exit Source Lock On: ` The projector will only search current input c ...

  • Optoma EH320UST - page 76

    76 English User Controls Information Hide On: Choose “On” to hide the info message. ` Off: Choose “Of f” to show the “searching” message. ` Information Hide Off On Keypad Lock When the keypad lock function is “On”, the Keypad will be locked however , the projector can be operated by the remote control. By selecting “Off”, you wi ...

  • Optoma EH320UST - page 77

    77 English User Controls Background Color Use this feature to display a “Black”, “Red”, “Blue”, “Green” or “White”, screen when no signal is available. Background Color White VGA2 Switch When the “VGA2 Switch” feature is “In” then VGA2 port functions as input port. If the “VGA2 Switch” is “Out” then the port func ...

  • Optoma EH320UST - page 78

    78 English User Controls Reset Current: Choose “Y es” to return the display parameters on this ` menu to the factory default settings. All: Choose “Y es” to return the display parameters on all menus ` to the factory default settings. Reset ? No Y es Reset Processing ... Exit Choose “Exit” to exit the menu. ...

  • Optoma EH320UST - page 79

    79 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Lamp Reminder Off On Brightness Mode Bright: ` Choose “Bright” to i ...

  • Optoma EH320UST - page 80

    80 English User Controls Lamp Reset Resets the lamp hour counter after replacing the lamp. Lamp Reset No Y es Lamp Reset ? No Y es Exit Choose “Exit” to exit the menu. Lamp Behavior in different mode and function: Brightness Mode Bright Eco Dynamic Eco+ White Pattern 100% 80% 100% 80% Dimming range N/A N/A 100%~30% 80%~30% Black Pattern 100% 80 ...

  • Optoma EH320UST - page 81

    81 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector Control Panel or on the remote control. Direct Power On Off On Signal Power On Choose “On” to activate Signal Power mode ...

  • Optoma EH320UST - page 82

    82 English User Controls Auto Power Off (min) Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector . The projector will automatically power off when the countdown has nished (in minutes). Auto Power Off (min) Press the ` to decrease the timer interval. Press the ` to increase the ...

  • Optoma EH320UST - page 83

    83 English User Controls USER 1 The default value is HDMI2. USER 1 HDMI2 Press the into the next menu and then press the or to select HDMI2/VGA2/T est Pattern/LAN/Brightness/Contrast/Sleep T imer/ Color Matching/Color T emp/Gamma/ Source Lock /Projec - tion/Lamp Settings/Zoom/Freeze. USER 2 The default value is VGA2. USER 2 VGA2 Press the into the ...

  • Optoma EH320UST - page 84

    84 English User Controls OPTIONS | Filter Settings Filter Usage Hours Display the lter time. Filter Reminder Choose this function to show or hide the warning message when the changing lter message is displayed. (Factory default setting: 1000 hours) Filter reminder 1000 hr Press the ` to decrease the time period. Press the ` to increase the ti ...

  • Optoma EH320UST - page 85

    85 English Appendices T roubleshooting If you experience a problem with your projector , please refer to the following information. If a problem persists, please contact your local reseller or service center . Image Problems No image appears on-screen Ensure all the cables and power connections are correctly and ` securely connected as described in ...

  • Optoma EH320UST - page 86

    86 English Appendices Image has slanted sides: If possible, reposition the projector so that it is centered on the ` screen and below the bottom of the screen. Use “Display-->V Keystone” from the OSD to make an adjust - ` ment. Image is reversed Select “Setup-->Projection” from the OSD and adjust the pro - ` jection direction. Blurry ...

  • Optoma EH320UST - page 87

    87 English Appendices Other Problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord ` and wait at least 20 seconds before reconnecting power. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may ` make a loud popping sound. If this hap ...

  • Optoma EH320UST - page 88

    88 English Appendices Steady light   No light  Message Power LED Temp-LED Lamp-LED (Red/Green/Blue) (Red) (Red) Standby state (Input power cord) Red Power on (W arm- ing) Flashing Blue Lamp lighting Blue Power off (Cooling) Flashing Blue. Red (cooling fan has turned off) Quick Resume (100 secs) Flashing Blue Error (Over temp.) Flashing Red ...

  • Optoma EH320UST - page 89

    89 English Appendices Power off:  Power Off? Press Power Key again Lamp warning:  T emperature warning:  Warning TEMPERA TURE TOO HIGH 1. Make sure air in and outlets are not blocked. Please 2. Make sure the environment temperature is under 45 degree C. If the problem persists in spite of the above. Please contact local service centre for ...

  • Optoma EH320UST - page 90

    90 English Appendices The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before ...

  • Optoma EH320UST - page 91

    91 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button on the remote control or on the Control Panel of the projector . 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Press the release button to disengage the lamp cover from the main un ...

  • Optoma EH320UST - page 92

    92 English Appendices Installing and Cleaning the Dust Filter  Dust  lters are only required/sup- plied in selected regions with excessive dust. We recommend you clean the dust  lter every 500 hours of operation, or more often if you are using the projector in a dusty environment. When the warning message appears on the screen, do the f ...

  • Optoma EH320UST - page 93

    93 English Appendices HDMI Compatibility Compatibility Modes Digital B0/Established timing B0/Standard timing B0/Detail timing: 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz 640 x 480 @ 72Hz 640 x 480 @ 75Hz 800 x 600 @ 56Hz 800 x 600 @ 60Hz 800 x 600 @ 72Hz 800 x 600 @ 75Hz 1024 x 768 @ 60Hz 1024 x 768 @ 70Hz 1024 x 768 @ 75Hz 1280 x 1024 @ 7 ...

  • Optoma EH320UST - page 94

    94 English Appendices T rue 3D Video Compatibility Input resolution Input timing HDMI 1.4b 3D Input 1280 x 720p @ 50Hz T op-and-Bottom 1280 x 720p @ 60Hz T op-and-Bottom 1280 x 720p @ 50Hz Frame packing 1280 x 720p @ 60Hz Frame packing 1920 x 1080i @ 50 Hz Side-by-Side (Half) 1920 x 1080i @ 60 Hz Side-by-Side (Half) 1920 x 1080p @ 24 Hz T op-and-Bo ...

  • Optoma EH320UST - page 95

    95 English Appendices RS232 Pin Assignments RS232 Commands and Protocol Function List  RS232 shell is grounded. Pin no. Spec. (from projector side) 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 ...

  • Optoma EH320UST - page 96

    96 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F XX=01-99, projector ’s ID, XX=00 is for all projectors 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> ...

  • Optoma EH320UST - page 97

    97 English Appendices ~XX327 n 7E 30 30 33 32 37 20 a 0D Color Matching Red Hue n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX328 n 7E 30 30 33 32 38 20 a 0D Green Hue n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX329 n 7E 30 30 33 32 39 20 a 0D Blue Hue n = -50 (a=2D 35 30) ~ 50 (a=35 30) ~XX330 n 7E 30 30 33 33 30 20 a 0D Cyan Hue n = -50 (a=2D 35 30) ~ 50 (a= ...

  • Optoma EH320UST - page 98

    98 English Appendices ~XX37 1 7E 30 30 33 37 20 31 0D Color Space Auto ~XX37 2 7E 30 30 33 37 20 32 0D RGB RGB(0-255) ~XX37 3 7E 30 30 33 37 20 33 0D YUV ~XX37 4 7E 30 30 33 37 20 34 0D RGB(16 - 235) ~XX73 n 7E 30 30 37 33 20 a 0D Signal (RGB) Frequency n = -5 (a=2D 35) ~ 5 (a=35) By signal ~XX74 n 7E 30 30 37 34 20 a 0D Phase n = 0 (a=30) ~ 31 (a ...

  • Optoma EH320UST - page 99

    99 English Appendices ~XX70 1 1 7E 30 30 37 30 20 31 31 0D Finnish ~XX70 12 7E 30 30 37 30 20 31 32 0D Greek ~XX70 13 7E 30 30 37 30 20 31 33 0D Traditional Chinese ~XX70 14 7E 30 30 37 30 20 31 34 0D Simplied Chinese ~XX70 15 7E 30 30 37 30 20 31 35 0D Japanese ~XX70 16 7E 30 30 37 30 20 31 36 0D Korean ~XX70 17 7E 30 30 37 30 20 31 37 0D Russi ...

  • Optoma EH320UST - page 100

    100 English Appendices ~XX88 2 7E 30 30 38 38 20 32 0D cc2 ~XX87 1 7E 30 30 38 37 20 31 0D Network Status(Read only Return :Oka, a=0/1 Disconnected/ Connected ~XX87 3 7E 30 30 38 37 20 33 0D IP Address(Read only) Return: “Okaaa_bbb_ccc_ddd” ~XX454 0/2 7E 30 30 34 35 34 20 30(32) 0D Crestron Off ~XX454 1 7E 30 30 34 35 34 20 31 0D On ~XX455 0/2 ...

  • Optoma EH320UST - page 101

    101 English Appendices ~XX1 15 1 7E 30 30 31 31 35 20 31 0D Quick Resume On ~XX1 15 0 7E 30 30 31 31 35 20 30 0D Off (0/2 for backward compatible) ~XX1 14 1 7E 30 30 31 31 34 20 31 0D Power Mode(Standby) Active (<=0.5W) ~XX1 14 0 7E 30 30 31 31 34 20 30 0D Eco. (0/2 for backward compatible) ~XX109 1 7E 30 30 31 30 39 20 31 0D Lamp Reminder On ~X ...

  • Optoma EH320UST - page 102

    102 English Appendices READ from projector 232 ASCII Code HEX Code Function Projector Return Description ~XX121 1 7E 30 30 31 32 31 20 31 0D Input Source Commands Oka a = 0 None a = 2 VGA-1 a = 3 VGA-2 a = 5 Video a = 7 HDMI1 a = 8 HDMI2 ~XX122 1 7E 30 30 31 32 32 20 31 0D Sofware V ersion OKdddd dddd: FW version ~XX123 1 7E 30 30 31 32 33 20 31 0D ...

  • Optoma EH320UST - page 103

    103 English Appendices ~XX351 0 7E 30 30 33 35 31 20 30 0D Fan1 speed(blower) Oka a=0000~9999 ~XX352 1 7E 30 30 33 35 32 20 31 0D System temperature Oka a=000~999 ~XX353 1 7E 30 30 33 35 33 20 31 0D Serial number Okaaaaaaaaaa aaaaaaa a=serial number string ~XX354 1 7E 30 30 33 35 34 20 31 0D Closed Captioning Oka a: 0/1/2 = off/cc1/cc2 ~XX355 1 7E ...

  • Optoma EH320UST - page 104

    104 English Appendices  Please note that damage resulting from incorrect installation will void the warranty . Ceiling Mount Installation If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specications: :  Screw type: M4*3  Maximum screw length: 1 1m ...

  • Optoma EH320UST - page 105

    105 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Canada 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Latin America 3178 ...

  • Optoma EH320UST - page 106

    106 English Appendices Deutschland Wiesenstrasse 21 W +49 (0) 21 1 506 6670 D40549 Düsseldorf, +49 (0) 21 1 506 66799 Germany info@optoma.de Scandinavia Lerpeveien 25 +47 32 98 89 90 3040 Drammen +47 32 98 89 99 Norway info@optoma.no PO.BOX 9515 3038 Drammen Norway Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,13 ...

  • Optoma EH320UST - page 107

    107 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a ...

  • Optoma EH320UST - page 108

    108 English Appendices Declaration of Conformity for EU countries EMC Directive 2004/108/EC (including amendments) y Low V oltage Directive 2006/95/EC y R & TTE Directive 1999/5/EC (if product has RF function) y Do not throw this electronic device into the trash when discarding. T o minimize pollution and ensure utmost protection of the global ...

Manufacturer Optoma Category Video projector

Documents that we receive from a manufacturer of a Optoma EH320UST can be divided into several groups. They are, among others:
- Optoma technical drawings
- EH320UST manuals
- Optoma product data sheets
- information booklets
- or energy labels Optoma EH320UST
All of them are important, but the most important information from the point of view of use of the device are in the user manual Optoma EH320UST.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Optoma EH320UST, service manual, brief instructions and user manuals Optoma EH320UST. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Optoma EH320UST.

Similar manuals

A complete manual for the device Optoma EH320UST, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Optoma EH320UST by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Optoma EH320UST.

A complete Optoma manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Optoma EH320UST - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Optoma EH320UST, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Optoma EH320UST, that we can find in the current document
3. Tips how to use the basic functions of the device Optoma EH320UST - which should help us in our first steps of using Optoma EH320UST
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Optoma EH320UST
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Optoma EH320UST in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Optoma EH320UST?

Use the form below

If you did not solve your problem by using a manual Optoma EH320UST, ask a question using the form below. If a user had a similar problem with Optoma EH320UST it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)