English dropdown-ico

Manual Lenoxx Electronics CI1000HT

40 pages 2.19 mb
Download

Go to site of 40

Summary
  • Lenoxx Electronics CI1000HT - page 1

    INSTALLATION AND OPERATION MANUAL Model CI2000HT Shown RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE EPA CERTIFIED WOOD BURNING STOVE THIS APPLIANCE MUST BE INSTALLE D BY A QUALIFIED INSTALLER. READ ENTIRE MANUAL THOROUGHLY BEFORE INSTALLATION. P/N 775 , 080M ; Rev. F , 3 / 2005 Spectra Series Wood Stoves MODELS CI1000HT and CI2000HT ...

  • Lenoxx Electronics CI1000HT - page 2

    IMPORTANT WARNINGS PLEASE READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE YOUR NEW ROOM HEATER. FOR YOUR SAFETY, FOLLOW THE INSTALLATION, OPE RATION AND MAINTENANCE INSTRUCTIONS EXACTLY, WITHOUT DEVIATION. FAILURE TO FOLLOW THESE IN STRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH. IF THIS APPLIANCE IS NOT PROPERLY INSTALLE ...

  • Lenoxx Electronics CI1000HT - page 3

    TABLE OF CONTENTS PAGE 3 Important Warn ings ................................................ 2 Testing/Listing, EPA, Using this Manual .................. 3 Planning Your Inst allation ..................................... 4-9 Installati on ........................................................ 10-14 Care and Oper ation .......................... ...

  • Lenoxx Electronics CI1000HT - page 4

    PLANNING YOUR INSTALLATION PAGE 4 QUESTIONS TO ASK LOCAL BUILDING OFFICIAL A correct installation is critical and imperative for reduc- ing fire hazards and perilous conditions that can arise when wood burning appliances are improperly installed. The installer must follow all of the manufacturers’ in- structions. These models are designed as radi ...

  • Lenoxx Electronics CI1000HT - page 5

    PLANNING YOUR INSTALLATION – Model CI1000HT PAGE 5 Top View FOR INSTALLATIONS IN THE USA MODEL CI1000H T FLOOR PROTECTION The floor protector must meet or exceed the minimum ther- mal requirements as defined on this page (see Floor Protec- tion Using Alternate Material As Floor Protector) . If the floor protection is to be stone, tile, brick, etc ...

  • Lenoxx Electronics CI1000HT - page 6

    PLANNING YOUR INSTALLATION – Model CI1000HT PAGE 6 Top View FOR INSTALLATIONS IN CANADA MODEL CI1000H T FLOOR PROTECTION The floor protector must meet or exceed the minimum ther- mal requirements as defined on this page (see Floor Pro- tection Using Alternate Material As Floor Protector) . If the floor protection is to be stone, tile, brick, etc. ...

  • Lenoxx Electronics CI1000HT - page 7

    PLANNING YOUR INSTALLATION – Model CI2000HT PAGE 7 Top View FOR INSTALLATIONS IN THE USA & CANADA MODEL CI2000HT FLOOR PROTECTION The floor protector must meet or exceed the minimum ther- mal requirements as defined on this page (see Floor Protec- tion Using Alternate Material As Floor Protector) . If the floor protection is to be stone, tile ...

  • Lenoxx Electronics CI1000HT - page 8

    PLANNING YOUR INSTALLATION – Model CI1000HT PAGE 8 MODEL CI1000HT COMBUSTIBLE WALL CLEARANCE – USA & Canada WARNING: It is very im portant that you observ e the minimum clearances. There are listed clearances for your stove which were determined in a Laboratory test using various "classes" of stove pipe or chimney. Minimums are fi ...

  • Lenoxx Electronics CI1000HT - page 9

    PLANNING YOUR INSTALLATION – Model CI2000HT PAGE 9 MODEL CI2000HT COMBUSTIBLE WALL CLEARANCE – USA & Canada WARNING: It is very im portant that you observ e the minimum clearances. There are listed clearances for your stove which were determined in a Laboratory test using various "classes" of stove pipe or chimney. Mi nimums are f ...

  • Lenoxx Electronics CI1000HT - page 10

    INSTALLATION PAGE 10 INSTALLING LEG PADS The four leg pads (included in accessory package), are provided for placement under the four legs. TYPES OF CHIMNEYS The unit must be connected to either a code-approved masonry chimney with a flue liner, or a 6 inch diameter factory-built chimney complyi ng with the requirements for Type HT chimneys in the ...

  • Lenoxx Electronics CI1000HT - page 11

    INSTALLATION PAGE 11 CHIMNEY INSPECTION Existing chimneys must be in spected before installing your stove. Consult your local building department for chimney code requirements. A masonry chimney must have a code approved liner. This liner must not have broken or missing pieces. Some non-code masonry chimneys may be brought up to code by being relin ...

  • Lenoxx Electronics CI1000HT - page 12

    INSTALLATION PAGE 12 DRAFT REQUIREMENTS The appliance is merely one component of a larger system. The other equally im portant component is the venting system which is nec essary for achieving the required flow of combustion air to the fire chamber and for safely removing unwanted combustion byproducts from the appliance. If the v enting system&apo ...

  • Lenoxx Electronics CI1000HT - page 13

    INSTALLATION See Pipe Manufacturers Instructions For Installation Requirements Of Venting Components And Vent Clearances. PAGE 13 SINGLE WALL PIPE Using 6” Diameter Single Wall Connector Pipe DOUBLE WALL PIPE (Approved for Model CI2000HT Only ) Using 6” Diameter Type L-Vent Connector Pipe IMPORTA NT NOTES: • Min imize the use of elbow s (30 ? ...

  • Lenoxx Electronics CI1000HT - page 14

    INSTALLATION – Combustible Wall Chimney Connector Pass-Throughs PAGE 14 1. Connectors to a masonry chimney, excepting method B, shall extend in one cont inuous section through the wall pass-through system and the chimney wall, to but not past the inner flue liner face. 2. A chimney connector sha ll not pass through an attic or roof space, closet ...

  • Lenoxx Electronics CI1000HT - page 15

    CARE AND OPERATION PAGE 15 PRIMARY AIR DRAFT CONTROL Use the air control adjustment tool (provided) to adjust the air controls per the following instructions. Air Control / Ash Pan Removal Tool The primary combustion air delivery is controlled by the Primary Air Draft Control Assembly (located above the front door). The heat output c an be controll ...

  • Lenoxx Electronics CI1000HT - page 16

    CARE AND OPERATION PAGE 16 HOW TO START AND MAINTAIN A FIRE 1. Using the Air Control Tool (provided), open the Start-Up Air Control (see Start-Up Air Control , on page 15). 2. Adjust the primary air draft control to the full open position (see Primary Air Draft Control on page 15). 3. Open the side fuel loading door and build your fire directly on ...

  • Lenoxx Electronics CI1000HT - page 17

    CARE AND OPERATION PAGE 17 FRONT ASH REMOVAL DOOR AND SIDE FUEL LOAD- ING DOOR CAUTION: When opening the doors, do not extend them beyond their normal trav el. Overextending the doors to a further open position can put excessiv e stress on the hinge area of the doors w hich may result in breakage. Latch Assemblies (For front ash removal door, side ...

  • Lenoxx Electronics CI1000HT - page 18

    CARE AND OPERATION PAGE 18 FIRST FIRE NOTE: There is often an unpleasant odor and non- toxic fumes during the first initial burns (this is a natural result of the paint curing). We recommend that a w indow should be left open near the appliance during this curing process. See Break-In Period on page 17. When your installation has been completed and ...

  • Lenoxx Electronics CI1000HT - page 19

    CARE AND OPERATION PAGE 19 BURN RECOMMENDED FUEL This appliance is designed for use with natural well- seasoned wood. Do not burn particleboard scraps or pressed logs because they can produce conditions which will deteriorate metal. Green or uncured wood does not work well as fuel, and can cause increased creosote buildups. The value of green wood ...

  • Lenoxx Electronics CI1000HT - page 20

    CARE AND OPERATION PAGE 20 SEASONING GUIDE Softwoods – 18 months Hardwoods – 18 months to 24 months This period can be shortened (12 to 15 months) if the wood is cut to the right length and imm ediately stored under a ventilated shelter. Logs that are 5” diameter across or larger should be split in half, three pieces if over 8 inches, and fou ...

  • Lenoxx Electronics CI1000HT - page 21

    MAINTENANCE PAGE 21 DO NOT CLEAN STOVE WHILE HOT INSPECT THE ENTIRE STOVE FREQUENTLY FOR PROPER OPERATION, FIT AND SOUNDNESS OF PARTS. IF ANY MALFUNCTIONING, CRACKED, BRO- KEN, OR LOOSE PARTS OR OTHER PROBLEMS ARE NOTED, CONTACT YOUR DEALER OR QUALIFIED SERVICEMAN TO INSPECT AND REPAIR THE UNIT. DO NOT OPERATE THE UNIT IF INSTALLED OR FUNCTIONING I ...

  • Lenoxx Electronics CI1000HT - page 22

    MAINTENANCE PAGE 22 SERVICING GLASS CAUTION: BE CAREFUL NOT TO ABUSE DOOR ASSEMBLY BY STRIKING OR SLAMMING IT. IF THE DOOR ASSEMBLY OR GLASS IS BROKEN OR DAMAGED, THEY MUST BE REPLACED WITH FAC- TORY ORIGINAL PARTS BEFORE HEATER CAN BE SAFELY OPERATED. USE ONLY COMPONENTS PROVIDED BY THE MANUFACTURER AS RE- PLACEMENT PARTS. Cleaning Glass: Ensure s ...

  • Lenoxx Electronics CI1000HT - page 23

    MAINTENANCE / TROUBLESHOOTING PAGE 23 IN THE EVENT OF A CHIMNEY FIRE Make sure the fuel loading doors are securely closed. Adjust the primary air draft control to the low est (most closed) setting and ensure that the start-up air control is closed. Call the fire depart- ment immediately. After a chimney fire, the complete chimney sy stem should be ...

  • Lenoxx Electronics CI1000HT - page 24

    TROUBLESHOOTING PAGE 24 OVERFIRING DAMAGE If the heater or chimney connec tor glows, you are overfir- ing. Other symptoms may include: Cracking, warping or burning out of components, stove glass may develop a haze, which will not come off with cleaning. Overfiring of a stove is a condition where excessive tem- peratures are reached, beyond the desi ...

  • Lenoxx Electronics CI1000HT - page 25

    SPECIFICATIONS - Model CI1000HT PAGE 25 Flue posit ion........................................ Top Flue collar size .................................... 6" (152 mm) Approx. burn time .............................. 6 to 8 hours Maximum burn ra te ........................... 87, 301 BTU EPA BTU Ra nge ................................. 11, 500 ? ...

  • Lenoxx Electronics CI1000HT - page 26

    SPECIFICATIONS - Model CI2000HT PAGE 26 Flue posit ion........................................ Top Flue collar size .................................... 6" (152 mm) Approx. burn time .............................. 6 to 8 hours Maximum burn ra te ........................... 96, 662 BTU EPA BTU Ra nge ................................. 11, 923 ? ...

  • Lenoxx Electronics CI1000HT - page 27

    REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 27 PART # (ITEM #) DESCRIPTION WHERE USED See Note 40M5701 ( ♦ 31) Air Column Set, Left & Right (Includes Gaskets & Screw s) CI1000HT 40M6901 ( ♦ 32) Air Column Set, Left & Right (Includes Gaskets & Screw s) CI2000HT 40M2301 ( ♦ 33) Air Deflector (Air Wash), Upper (Inclu ...

  • Lenoxx Electronics CI1000HT - page 28

    REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 28 PART # (ITEM #) DESCRIPTION WHERE USED See Note 40M4501 Gasket Kit, 6 mm X 156cm (14979) For Air Intake Slide & Glass & 4 Ea. 6mm Glass Clip Gaskets (31856) CI1000HT & CI2000HT 40M0201 Gasket Kit, Ashpan Door Rope (8mm Dia. X 97 cm) CI1000HT 40M4201 Gasket Kit, Rope (10mm Dia. ...

  • Lenoxx Electronics CI1000HT - page 29

    REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 29 ( ♦ 1) Front Firebox Door (CI1000HT & CI2000HT Series) ( ♦ 2) Side Loading Door (CI1000HT Series) ( ♦ 2) Side Loading Door (CI2000HT Series) ( ♦ 3) Ashpan Door (CI1000HT Series) ( ♦ 4) Ashpan Door (CI2000HT Series) ( ♦ 5) Bottom Center Firebrick (CI2000HT Series) ( ♦ 6) B ...

  • Lenoxx Electronics CI1000HT - page 30

    REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 30 ( ♦ 10) Right Low er Firebrick (CI2000HT Series) ( ♦ 11) Upper Rear Firebrick (CI2000HT Series) ( ♦ 12) Left Firebrick (CI1000HT Series) ( ♦ 13) Low er Rear Firebrick (CI1000HT Series) ( ♦ 14) Right Firebrick (CI1000HT Series) 8.47” / 215 mm x 5.12” / 130mm (.98” / 25mm thi ...

  • Lenoxx Electronics CI1000HT - page 31

    REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 31 ( ♦ 20) Fuel Grate Support Bar (CI1000HT Series) ( ♦ 21) Ash Removal Grate (CI1000HT Series) ( ♦ 22) Fuel Grate (CI1000HT Series) ( ♦ 23) Fuel Grate (CI2000HT Series) ( ♦ 24) Ashpan Door Hinge Pin (CI1000HT & CI2000HT Series) ( ♦ 25) Front Firebox Door Hinge Pin (CI1000HT S ...

  • Lenoxx Electronics CI1000HT - page 32

    REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 32 ( ♦ 32) Left Air Column Assembly (CI2000HT Series) ( ♦ 32) Right Air Column Assembly (CI2000HT Series) ( ♦ 33) Upper Air Deflector (CI1000HT Series) ( ♦ 34) Upper Air Deflector (CI2000HT Series) ( ♦ 35) Ashlip (CI1000HT & CI2000HT Series) ( ♦ 36) Ashpan (CI1000HT & CI20 ...

  • Lenoxx Electronics CI1000HT - page 33

    REPLACEMENT PARTS - Models: CI1000HT & CI2000HT PAGE 33 ( ♦ 43) Secondary Air Tube Assembly (CI1000HT Series) ( ♦ 44) Secondary Air Tube Assembly (CI2000HT Series) ( ♦ 45) Air Control/Ash Pan Remov al Tool (CI1000HT & CI2000HT Series) ( ♦ 46) Removable Door Opener Tool (CI1000HT & CI2000HT Series) ( ♦ 47) Draft Module (Air Int ...

  • Lenoxx Electronics CI1000HT - page 34

    OPTIONAL ACCESSORIES - Models: CI1000HT & CI2000HT PAGE 34 Catalog # Model Description Stove Model H0459 WTK-CI10 Window Trim Kit, Charcoal CI1000HT H0455 WTK-CI20 Window Trim Kit, Charcoal CI2000HT Window Trim Kit – CI1000HT & CI2000HT ...

  • Lenoxx Electronics CI1000HT - page 35

    LABEL, SAFETY / LISTING – Model CI1000HT PAGE 35 ...

  • Lenoxx Electronics CI1000HT - page 36

    SAFETY/LISTING LABEL – Model CI2000HT PAGE 36 ...

  • Lenoxx Electronics CI1000HT - page 37

    EPA LABELS – CI1000HT and CI2000HT PAGE 37 ...

  • Lenoxx Electronics CI1000HT - page 38

    PAGE 38 OWNERSHIP RECORDS Dealer’s Name: Dealer’s Address: City: State: Zip Code: Serial Number: Date of Purchase: Date Installed: Notes: SERVICE AND MAINTENANCE LOG Service Service Service Date Technician Description ...

  • Lenoxx Electronics CI1000HT - page 39

    ...

  • Lenoxx Electronics CI1000HT - page 40

    Printed in U.S.A  LENNOX HEARTH PRODUCTS 2002 P/N 775,080M Rev. F, 3/2005 1110 West Taft Avenue • Orange, CA 92865 LENNOX reserves the right to make changes at any time, without not ice, in design, materials, specifications, prices and also to di scontinued colors, styles and product s. Consult your local di stributor for fireplace code inform ...

Manufacturer Lenoxx Electronics Category Stove

Documents that we receive from a manufacturer of a Lenoxx Electronics CI1000HT can be divided into several groups. They are, among others:
- Lenoxx Electronics technical drawings
- CI1000HT manuals
- Lenoxx Electronics product data sheets
- information booklets
- or energy labels Lenoxx Electronics CI1000HT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lenoxx Electronics CI1000HT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lenoxx Electronics CI1000HT, service manual, brief instructions and user manuals Lenoxx Electronics CI1000HT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lenoxx Electronics CI1000HT.

Similar manuals

A complete manual for the device Lenoxx Electronics CI1000HT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lenoxx Electronics CI1000HT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lenoxx Electronics CI1000HT.

A complete Lenoxx Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lenoxx Electronics CI1000HT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lenoxx Electronics CI1000HT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lenoxx Electronics CI1000HT, that we can find in the current document
3. Tips how to use the basic functions of the device Lenoxx Electronics CI1000HT - which should help us in our first steps of using Lenoxx Electronics CI1000HT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lenoxx Electronics CI1000HT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lenoxx Electronics CI1000HT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lenoxx Electronics CI1000HT?

Use the form below

If you did not solve your problem by using a manual Lenoxx Electronics CI1000HT, ask a question using the form below. If a user had a similar problem with Lenoxx Electronics CI1000HT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)