English dropdown-ico

Manual Lathem 5000E Plus

62 pages 2.19 mb
Download

Go to site of 62

Summary
  • Lathem 5000E Plus - page 1

    Lathem Time Cor p oratio n ...

  • Lathem 5000E Plus - page 2

    This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy ...

  • Lathem 5000E Plus - page 3

    PRECAUTIONS This user's manual is prepared for safe and proper use of the unit. Please follow all the instructions to avoid possible danger to yourself or others and damage to the unit. Signs Various warnings and cautions are provided throughout this manual along with signs. Remember each sign and its explanation listed below for your safety a ...

  • Lathem 5000E Plus - page 4

    If foreign matter should get in the unit (including a piece of metal, water, or liquid), disconnect the plug from the outlet immediately and contact your dealer for servicing. There is a danger that further use may cause a fire or electric shock. Do not place the unit on an uneven or tilted surface. This may result in injuries due to the unit dropp ...

  • Lathem 5000E Plus - page 5

    TABLE OF CONTENTS INTRODUCTION & FEA TURES BEFORE USING THE TIME RECORDER Attached Accessories Location of Name Print Position on T ime Card QUICK EASY SETUP OPTIONAL FUNCTIONS HOW T O PROGRAM THE TIME RECORDER SETTING THE TIME SETTING THE DA TE SETTING THE 12/24 HOUR FORMA T SETTING THE PRINT ORDER SETTING THE PRINT P A TTERN SETTING THE PREPR ...

  • Lathem 5000E Plus - page 6

    1. INTRODUCTION & FEA TURES 2 1 I NTRODUCTON: Thank you for purchasing the 5000E plus. W e are confident this T ime Recorder will give you full satisfaction. Items such as the time and date are preset at the factory . After plugging in the AC power the T ime Recorder can be used immediately . However, we recommend reading this manual before you ...

  • Lathem 5000E Plus - page 7

    2.BEFORE USING THE TIME ST AMP 2 1 Package Contents Unpack the Time Recorder and check its contents to ensure that the Time Recorder unit and all accessories as shown below are included. • Keys ................2 pcs. ................1 pcs. .......4 pcs. ....1 sheet. •R ibbon Cassette • Wall-Mount Fittings Screw Template • The ribbon casette ...

  • Lathem 5000E Plus - page 8

    3. QUICK EASY SETUP 2 3 2 JAN 31 12:00 1 Unlock the key and remove the top case. 3 Replace the cover and lock. 2 Remove the PROTECTION P AD. 4 Plug the AC cord into the AC outlet and insert a card. C A U T I O N C A U T I O N (Print example) Protection PAD AC outlet AC cord Card ...

  • Lathem 5000E Plus - page 9

    4. OPTIONAL FUNCTIONS 3 Following optional functions are available by adding an optional board. External T ime Signal for Bell, Built-in Buzzer and Slave Clock. External T ime Signal and Built-in Buzzer External time signal and Built-in buzzer shall be controlled by T ime table program and their duration settings. Refer to the "18.SETTING THE ...

  • Lathem 5000E Plus - page 10

    5. HOW T O PROGRAM THE TIME RECORDER 2 5 2 T o enter the program setting mode, you must plug the AC cord into the AC outlet and remove the cover . Next press the [SELECT] button once. Then the T ime Recorder goes into the program mode showing the " "on the display positioned under the "TIME" mark. Function of 3 control buttons [ ...

  • Lathem 5000E Plus - page 11

    6. SE T TING THE TIME 6 3 1 Press the [SELECT] button and position the " " under the "TIME" mark. At that moment, the "Hour" flashes. (The flashing means it can be changed.) Change the "Hour". In case of the example, press the [SET] button because the hour is not to be changed. At that moment, the flashing ch ...

  • Lathem 5000E Plus - page 12

    7. SET TING THE DA TE 6 7 1 Press the [SELECT] button and position the " " under the "DA TE" mark. At that moment, the "Y ear" flashes. (The flashing means it can be changed.) Change the "Y ear". In case of the example, press the [SET] button because the year 2003 is not to be changed. At that moment, the fla ...

  • Lathem 5000E Plus - page 13

    8. SE T TING THE 12/24 HOUR FORMA T 8 3 1 Press the [SELECT] button and position the " " under the "HOUR" mark. At that moment, the flashing digit indicates "Hour Format Options". (The flashing means it can be changed.) 2 After you finish setting the 12/24 hour format, press the [SET] button once again. Change the &quo ...

  • Lathem 5000E Plus - page 14

    9. SET TING THE PRINT ORDER 9 9 1 Press the [SELECT] button and position the " " under the "PRINT ORDER" mark. At that moment, the flashing digit indicates "Print Order Options". (The flashing means it can be changed.) 2 After you finish setting the print order , press the [SET] button once again. Now the print order s ...

  • Lathem 5000E Plus - page 15

    10. SE T TING THE PRINT P A T TERN 10 3 1 Press the [SELECT] button and position the " " under the "PRINT P A TTERN" mark. At that moment, the flashing digit indicates "Y ear Digit Options". (The flashing means it can be changed.) 2 Change the "T ype of Minute". In case of the example, press the [CHANGE] butt ...

  • Lathem 5000E Plus - page 16

    10 11 3 Change the "Leading Zero". In case of the example, press the [CHANGE] button to set at "2". And then press the [SET] button. 4 After you finish setting the print pattern, press the [SET] button once again. Now the print pattern setting has been completed. Replace the cover and lock. Important: If you do not complete Step ...

  • Lathem 5000E Plus - page 17

    1 1. SE T TING THE PREPROGRAMED COMMENTS 12 11 1 Press the [SELECT] button and position the " " under the "COMMENT" mark. At that moment, the flashing digit indicates "Comment Options". (The flashing means it can be changed.) 2 After you finish setting the comment, press the [SET] button once again. Now the preprogramm ...

  • Lathem 5000E Plus - page 18

    12. SET TING THE CUST OMIZED COMMENTS 13 13 1 Press the [SELECT] button and position the " " under the "PRINT ORDER" mark. At that moment, the flashing digit indicates "Print Order Options". (The flashing means it can be changed.) Press the [CHANGE] button to set at the "30" (Customized Comments). At that mom ...

  • Lathem 5000E Plus - page 19

    14 14 3 Press the [SELECT] button and position the " " under the "COMMENT" mark. Setting the 1st comment line. At the moment, the flashing digit indicates "Character Position". And then press the [SET] button. At the moment, the flashing changes from "Character Position" to "Character Code". SELECT ...

  • Lathem 5000E Plus - page 20

    14 15 5 The 2nd character is "B", then enter the character code "03". Press the [CHANGE] button until the correct character code appears. And then press the [SET] button. SELECT CHANGE SE T 7 Follow the same procedure for further characters settings. 8 Setting the 2nd comment line Press the [SET] button to change the comment lin ...

  • Lathem 5000E Plus - page 21

    16 15 9 The 2nd character is "SP ACE", then enter the character code "01". Press the [CHANGE] button until the correct character code appears. And then press the [SET] button. SELECT CHANGE SE T Follow the same procedure for further characters settings. 12 11 10 Setting the 3rd comment line Press the [SET] button to change the c ...

  • Lathem 5000E Plus - page 22

    16 17 13 The 2nd character is "O", then enter the character code "10". Press the [CHANGE] button until the correct character code appears. And then press the [SET] button. SELECT CHANGE SE T 15 After you finish setting the customized comments, press the [SET] button three times. Now the customized comments setting has been compl ...

  • Lathem 5000E Plus - page 23

    18 18 Press the [SELECT] button and position the " " under the "PRINT ORDER" mark. At that moment, the flashing digit indicates "Print Order Options". (The flashing means it can be changed.) In case of the example, press the [SET] button because the "Print Order Options" not to be changed. At that moment, the ...

  • Lathem 5000E Plus - page 24

    18 19 Confirming the 1st comment line T o confirm the customized comments that have been set, press the [SELECT] button and position the " " under the "COMMENT" mark. At that moment, the "Character Position" flashes, and press the [CHANGE] button. While the "Character Position" changes, the "Character Co ...

  • Lathem 5000E Plus - page 25

    20 19 Changing the Customized Comments In case of example, press the [CHANGE] button to set at "5". And then press the [SET] button. At that moment, flashing changes from the "Character Position" to the "Character Code". Press the [CHANGE] button to set at "2A". Then press the [SET] button once. Now changing ...

  • Lathem 5000E Plus - page 26

    13. SET TING THE LANGUAGE 20 21 1 Press the [SELECT] button and position the " " under the "LANGUAGE" mark. At that moment, the flashing digit indicates "Print Language Options". (The flashing means it can be changed.) 2 After you finish setting the language, press the [SET] button once again. Now the language setting ...

  • Lathem 5000E Plus - page 27

    14. SET TING THE PRINT METHOD 22 21 1 Press the [SELECT] button and position the " " under the "PRINT METHOD" mark. At that moment, the flashing digit indicates "Print Direction Options". (The flashing means it can be changed.) 2 Change the "Print Activation". In case of the example, press the [CHANGE] button ...

  • Lathem 5000E Plus - page 28

    22 23 3 After you finish setting the print method, press the [SET] button once again. Now the print method setting has been completed. Replace the cover and lock. Important: If you do not complete Step 3, the T ime Recorder will not print. Automatic will allow the T ime Recorder to print by simply inserting a card or piece of paper . Semi-automatic ...

  • Lathem 5000E Plus - page 29

    15. SET TING THE DA YLIGHT SA VING TIME 24 23 1 Press the [SELECT] button and position the " " next to the "DA YLIGHT SA VING TIME" mark. (The flashing means it can be changed.) SELECT CHANGE SE T Year Month Date Daylight Saving T ime function D.S.T . execution time At 2:00 a.m. on the first day of DST , the clock automatically ...

  • Lathem 5000E Plus - page 30

    24 25 2 Change the "Y ear". In case of the example, press the [SET] button because the year 2003 is not to be changed. At the moment, the flashing changes from "Y ear" to "Month". 4 Change the "Date". Push the [CHANGE] button to set at "6" and push the [SET] button. At the moment, the "starting ...

  • Lathem 5000E Plus - page 31

    26 25 5 Change the "Y ear". In case of the example, press the [SET] button because the year 2003 is not to be changed. At the moment, the flashing changes from "Y ear" to "Month". 7 Change the "Date". Push the [CHANGE] button to set at "26" and push the [SET] button. At the moment, the "ending ...

  • Lathem 5000E Plus - page 32

    26 27 1 Press the [SELECT] button and position the " " next to the "DA YLIGHT SA VING TIME" mark. (The flashing means it can be changed.) 3 Press the [CHANGE] button to set at " ". Press the [SET] button twice. This cancels the daylight saving time settings. SELECT CHANGE SE T 2 Press the [SET] button and the flashing ...

  • Lathem 5000E Plus - page 33

    16. SET TING THE NUMBER 28 27 1 Press the [SELECT] button and position the " "next to the "NUMBER" mark. At that moment, the flashing digit indicates "Number Digit". (The flashing means it can be changed.) 2 Change the "Repeat T imes". The Repeat T imes can be set to 0 to 9. In case of the example, press the ...

  • Lathem 5000E Plus - page 34

    28 29 3 Change the "Reset Options". In case of the example, press the [CHANGE] button to set at "3". And then press the [SET] button. 4 After you finish setting the number , press the [SET] button once again. Now the number setting has been completed. Replace the cover and lock. Important: If you do not complete Step 4, the T im ...

  • Lathem 5000E Plus - page 35

    17. SE T TING THE INITIAL NUMBER 30 29 1 Press the [SELECT] button and position the " " next to the "INITIAL NUMBER" mark. At that moment, the flashing " " indicates the 1st digit of the initial number . (The flashing means it can be changed.) 2 Set the "Initial Number". In case of the example, press the [CHA ...

  • Lathem 5000E Plus - page 36

    18. SE T TING THE TIME T ABLE PROGRAM 30 31 1 Press the [SELECT] button and position the " " over the "TIME T ABLE PROGRAM" mark. At that moment, the flashing digit indicates "Program No.". (The flashing means it can be changed.) Setting program No. 1 (1) Set the "Day of the week". Press the [SET] button. At ...

  • Lathem 5000E Plus - page 37

    32 2 (2)Set the "Action". Press the [CHANGE] button to set at "1". And then press the [SET] button. At that moment, the display changes to the following figure. • The "Ext. Signal" and the "Built-in Buzzer" are available only when "Optional Board" is connected to the time recorder . (3)Set the &qu ...

  • Lathem 5000E Plus - page 38

    32 33 3 Setting program No. 2 Press the [CHANGE] button twice. At that moment, the display changes to the following figure. Make settings for Program No.2 in the same manner as for Program No.1, as illustrated in the following figure, and press the [SET] button. MO TU WE TH FR SA SU SELECT CHANGE SE T TIME TABLE PROGRAM Example 2: The time table pr ...

  • Lathem 5000E Plus - page 39

    34 33 1 Press the [SELECT] button and position the " " over the "TIME T ABLE PROGRAM" mark. At that moment, the flashing digit indicates the "Program No.". (The flashing means it can be changed.) 2 Setting program No. 1 (1) Set the "Day of the week". Press the [SET] button. At that moment, the flashing change ...

  • Lathem 5000E Plus - page 40

    34 35 (3)Set the "Hour". In case of example, press the [CHANGE] button to set at "9". And then press the [SET] button. 3 Setting program No. 2 Press the [CHANGE] button twice. At that moment, the display changes to the following figure. (4)Set the "Minute". In case of example, press the [CHANGE] button to set at " ...

  • Lathem 5000E Plus - page 41

    36 35 Setting program No. 3 Make settings for Program No.3 in the same manner as for Program No.1, as illustrated in the following figure, and press the [SET] button. 6 After you finish setting the time table program, press the [SET] button once again. 5 Setting program No. 4 Make settings for Program No.4 in the same manner as for Program No.1, as ...

  • Lathem 5000E Plus - page 42

    36 37 Confirming the T ime T able Program settings T o confirm the programs that have been set, press the [SELECT] button and position the " " over the "TIME T ABLE PROGRAM" mark. At that moment, the "Program No." flashes. And then press the [CHANGE] button. After you finish confirming the program, press the [SET] butt ...

  • Lathem 5000E Plus - page 43

    19. S E T TING THE EXTERNAL TIME SIGNAL / BUIL T -IN BUZZER 38 37 1 Press the [SELECT] button and position the " " over the "EXT . SIGNAL / BUIL T -IN BUZZ." mark. At that moment, the flashing digit indicates the "Ext. Signal". (The flashing means it can be changed.) 2 Change the "Ext. Signal". In case of the ...

  • Lathem 5000E Plus - page 44

    20. SE T TING THE SLA VE CLOCK 38 39 1 Press the [SELECT] button and position the " " over the "SLA VE CLOCK" mark. At that moment, the flashing digit indicates "Clock Options". (The flashing means it can be changed.) 2 Set the "Clock Options". In case of the example, press the [CHANGE] button to set at " ...

  • Lathem 5000E Plus - page 45

    21. SETTING THE P ASSWORD 40 41 1 Press the [SELECT] button and position the " " over the "P ASSWORD" mark. At the moment, the first two digits flash. (The flashing means it can be changed.) Change the first two digits. In case of the example, press the [CHANGE] button to set at "12". And then press the [SET] button. A ...

  • Lathem 5000E Plus - page 46

    42 41 1 Press the [SELECT] button, at that moment "9999" is displayed and the first two digits flash. (The flashing means it can be changed.) Set the first tow digits. In the example, press the [CHANGE] button to set at "12". And then press the [SET] button. At that moment, the flashing changes to the last two digits. 2 Set the ...

  • Lathem 5000E Plus - page 47

    42 43 1 Press the [SELECT] button, at that moment "9999" is displayed and the first two digits flash. (The flashing means it can be changed.) In the example, press the [CHANGE] button to set at "12". And then press the [SET] button. At that moment, the flashing changes to the last two digits. 3 Press the [SELECT] button and posi ...

  • Lathem 5000E Plus - page 48

    22. RESET TING 44 43 T o return all setting to the factory defaults, push the reset switch with a pointed implement. NOTICE: All your custom settings will be deleted and will revert to the factory defaults when the reset switch is pushed. T o make new settings, please refer to "Setting ··· ". Reset Switch ...

  • Lathem 5000E Plus - page 49

    WALL 23. W ALL MOUNTING 44 45 Caution: The supplied screws are intended for use on a thick wooden wall or wooden column. Do not use any other materials. The Time Recorder may come of f if used on other materials. 1 Install the supplied wall-mount screws into a wall by using the template. Be sure to keep about (1/4") 6mm of the screw head away ...

  • Lathem 5000E Plus - page 50

    24. REPLACING THE RIBBON CASSET TE 46 45 1 Unlock the key and remove the cover . 2 Hold the ribbon cassette by its tab and pull straight out to remove it. 3 T urn the knob of the new cassette in the direction of the arrow (clockwise) to tighten the ribbon. 4 Place the cassette inside the T ime Recorder as shown in the figure. Push the ribbon until ...

  • Lathem 5000E Plus - page 51

    46 47 5 T urn the knob of the cassette in the direction of the arrow to tighten the ribbon. 6 Replace the cover and lock. NOTICE: Install the cassette so that the ribbon is between the print head and the ribbon mask. Printing will not come out properly if the ribbon is placed behind the ribbon mask. Ribbon Ribbon mask Print head ...

  • Lathem 5000E Plus - page 52

    25. CHARACTER CODE FOR ALPHANUMERIC 48 Num: Sequential number HH: Hour MM: Minute SS: Second DOW : Day of the week 1 15: Language-Specific Character Code Character Code Meaning Code Character Code Meaning NULL SPACE – 3 Insert Character Delete Character Insert Line Delete Line A B C D E F G H I J K L M N O P Q R S T U V W X Y 8 8 8 8 8 8 8 8 5 8 ...

  • Lathem 5000E Plus - page 53

    48 Code Character A B C D E F G H I J K L M N O P Q R S T U V W X Y 7 7 7 7 7 7 7 7 4 7 7 7 8 7 7 7 7 7 7 6 7 7 8 7 6 - - - - - - - - - - - - 3 6 6 4 6 4 6 4 4 5 9 4 5 6 7 8 9 10 11 12 13 14 15 ´ + , - . / : ; _ & Large Character Max. Dots Note: ( ) is to indicate the following meanings. Code=6F: 2 digits setting of YEAR, Code=73 and 74:AM/PM ...

  • Lathem 5000E Plus - page 54

    50 Code Character A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 26 ( 37 ) 40 ( 57 ) 6x ( n ) 6x ( n ) 6x ( n ) 6x ( n ) 6x ( n ) - - - - - - - - - - - - - - - 3 6 6 4 5 4 6 4 4 4 8 HH:MM HH:MM:SS Number Number Number Number Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ...

  • Lathem 5000E Plus - page 55

    50 Language-Specific Character 51 Character Dots Bold Large Small # 9 7 6 $ 9 6 6 @ 9 7 6 [ 7 6 5 8 6 6 ] 7 6 5 ^ 8 6 4 ` 5 4 3 { 7 6 5 | 5 4 4 } 7 6 5 ~ 7 6 6 EURO 8 7 6 English Character Dots Bold Large Small Pt 11 8 8 $ 9 6 6 @ 9 7 6 ¡ 5 4 4 Ñ 8 7 6 ¿ 7 6 6 ´ 5 4 3 ` 5 4 3 ¨ 9 7 7 ñ 7 7 6 } 7 6 5 ~ 7 6 6 EURO 8 7 6 Spanish Character Dots ...

  • Lathem 5000E Plus - page 56

    26. INST ALLING THE Ni-Cd BA T TER Y (OPTIONAL) 52 51 1 Unlock the key and remove the cover . 3 Replace the cover and lock. 2 Insert the battery connector into the compartment connector to install the battery . ...

  • Lathem 5000E Plus - page 57

    27. CONNECTING THE OPTIONAL FUNCTIONS 52 53 1 Unlock the key and remove the cover . 3 Insert wires into two left terminals for the master clock, and tighten both screws. 4 Replace the cover and lock. 2 The connector for the master clock signals is on the back of the T ime Recorder . MASTER CLOC K UNIT Insert the " - " signal cable. Insert ...

  • Lathem 5000E Plus - page 58

    54 53 1 Unlock the key and remove the cover . 3 Insert wires into two right terminals for external time signal, and tighten both screws. 4 Replace the cover and lock. 2 The connector for external time signals is on the back of the T ime Recorder . Connecting the External T ime Signal connector CAUTION: Be sure to pull out AC cord from AC outlet bef ...

  • Lathem 5000E Plus - page 59

    54 53 1 Remove two screws holding the wire clamp. 2 Make wires go through the hole of the wire clamp and secure it with screws. (See the Figure 1.) If diameter of wires is too small to fix by the above method, turn the wire clamp upside down and feed wires through the clamp. Then secure it with screws. (See the Figure 2.) Attaching the Wire Clamp C ...

  • Lathem 5000E Plus - page 60

    28. TROUBLESHOOTING Error No. appears Refer to the following list for proper operation. Contact the store from whom you bought the unit. Correctly insert the card. Make sure that the ribbon cassette is correctly inserted in place. Press the push bar . Enter the correct password again. Make sure the correct starting and ending date of daylight savin ...

  • Lathem 5000E Plus - page 61

    29. SPECIFICA TIONS 56 55 Monthly accuracy ± 15sec. (at ordinary temperatures) Y ear up to 2099. Automatically adjusted to leap years, 31-day months and months with thirty or fewer days, and the days of the week. Dot matrix Three years of cumulative power failure hours after the date of shipment. Optional Ni-Cd battery , 200-time printing or 24 ho ...

  • Lathem 5000E Plus - page 62

    Lathem warrants the hardware products described in this guide against defects in material and workmanship for a period of one year from date of original purchase from Lathem or from an authorized Lathem reseller . The conditions of this warranty and the extent of the responsibility of Lathem T ime Corporation ("Lathem") under this warrant ...

Manufacturer Lathem Category Car Stereo System

Documents that we receive from a manufacturer of a Lathem 5000E Plus can be divided into several groups. They are, among others:
- Lathem technical drawings
- 5000E Plus manuals
- Lathem product data sheets
- information booklets
- or energy labels Lathem 5000E Plus
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lathem 5000E Plus.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lathem 5000E Plus, service manual, brief instructions and user manuals Lathem 5000E Plus. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lathem 5000E Plus.

Similar manuals

A complete manual for the device Lathem 5000E Plus, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lathem 5000E Plus by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lathem 5000E Plus.

A complete Lathem manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lathem 5000E Plus - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lathem 5000E Plus, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lathem 5000E Plus, that we can find in the current document
3. Tips how to use the basic functions of the device Lathem 5000E Plus - which should help us in our first steps of using Lathem 5000E Plus
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lathem 5000E Plus
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lathem 5000E Plus in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lathem 5000E Plus?

Use the form below

If you did not solve your problem by using a manual Lathem 5000E Plus, ask a question using the form below. If a user had a similar problem with Lathem 5000E Plus it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)