English dropdown-ico

Manual Russound CAM6.6T-S1

112 pages 6.26 mb
Download

Go to site of 112

Summary
  • Russound CAM6.6T-S1 - page 1

    CAM6.6T -S1 System 6-Zone, 6-Source AM/FM Receiver and UNO-S1 Smart Keypads INSTRUCTION MANUAL ...

  • Russound CAM6.6T-S1 - page 2

    WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to a ...

  • Russound CAM6.6T-S1 - page 3

    T ABLE OF CONTENTS 3 USER SECTION Pr oduct Introduction ............................................................................................................6 Component Guide CAM6.6 Controller.............................................................................................................. .7 UNO-S1 Keypad ....................... ...

  • Russound CAM6.6T-S1 - page 4

    4 T ABLE OF CONTENTS All trademarks are the pr operty of their respective owners. Source IR Input Connections ..............................................................................................30 Common IR Input Connection .............................................................................................31 Speaker Connections ...

  • Russound CAM6.6T-S1 - page 5

    5 USER SECTION Component Guides Explains front panel featur es of the CAM6.6 contr oller , UNO-S1 keypad, optional UNO-S2 keypad and UNO-LRC1 remote contr ol. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available thr ough the User Menu. IN P U T MU T E LA S T SLEE P IN F O MENU IN PU T EN ...

  • Russound CAM6.6T-S1 - page 6

    6 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAM6.6T -S1 System to enhance your home with distributed audio. This system’ s state-of-the-art features and components blend seamlessly with your unique lifestyle and prefer ences. Besides distributing and controlling six audio sour ces to six r ooms (zones), your CAM6.6T-S1 System of ...

  • Russound CAM6.6T-S1 - page 7

    7 USER COMPONENT GUIDE CAM6.6 Contr oller-Fr ont Panel MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICA TORS - Indicates when a room is on (gr een) or off (red) 1 2 2 1 Main Power and Zone Status The power switch for the CAM6.6 controller is “on” in the up position. Any active room (1-6) is indicated on the fr ont of the ...

  • Russound CAM6.6T-S1 - page 8

    8 USER COMPONENT GUIDE UNO-S1 Keypad LCD P ANEL - 5-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for th ...

  • Russound CAM6.6T-S1 - page 9

    9 CD PLAYER 1 LCD P ANEL - 12-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room IR RECEIVER - R ...

  • Russound CAM6.6T-S1 - page 10

    10 USER COMPONENT GUIDE UNO-LRC1 Remote Contr ol LOCAL DEVICE BUTTONS - Select local source to be contr olled by UNO-LRC1. SETUP - Use for pr ogramming UNO-LRC1 using the built-in library or by learning-in codes. UNO SOURCE BUTTON - Selects UNO Keypad for control by UNO-LRC1. ROOM ON/OFF - T urns room on and off while in the UNO mode. NUMBER BUTTON ...

  • Russound CAM6.6T-S1 - page 11

    11 Zone On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. P r ess and release to turn off the UNO System Keypad. This will also put the corresponding CAM6.6’ ...

  • Russound CAM6.6T-S1 - page 12

    12 USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. T o enter or exit the User Menu, press and hold during normal operation. The following keys are used to navigate and make changes while using the User Menu: Press and hold to adjust featur ...

  • Russound CAM6.6T-S1 - page 13

    13 USER OPERA TION Optional UNO-S2 Keypad Zone On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. P r ess and release to turn off the UNO System Keypad. This wi ...

  • Russound CAM6.6T-S1 - page 14

    14 The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. The following keys are used to navigate and make changes while using the User Menu: T o enter the User Menu, press and hold during normal operation. T o exit the User Menu, press and r elease . Adjust feature setting (incr ement). Adjust f ...

  • Russound CAM6.6T-S1 - page 15

    15 USER INTERNAL SOURCE - AM/FM TUNER UNO-S1 Keypad Contr ol UNO-S1 Keypad Contr ol of T uner Selecting the tuner On the UNO-S1 keypad, press to select the AM/FM tuner by choosing the tuner’ s preas- signed source number (1). Selecting the desired fr equency Press and hold or to activate manual tuning. Once active, press or to scroll through fr e ...

  • Russound CAM6.6T-S1 - page 16

    16 USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Contr ol UNO-S2 Keypad Contr ol of T uner Selecting the tuner On the UNO-S2 keypad, press to select the AM/FM tuner by choosing the tuner’ s preas- signed source number (1). Selecting the desired band Push to toggle between AM band and FM band reception. Selecting the desired fr equency Use and ...

  • Russound CAM6.6T-S1 - page 17

    17 92.5 MHz FM TUNER SELECTION - Select source number assigned to AM/FM TUNER (1) TUNE UP/DOWN - Used for manual station selection SELECT - Selects AM or FM band SEEK - (press) Seeks next higher tuned station SCAN - (press and hold) Scans thr ough tuned sta- tions with 5-second preview befor e next station MUTE - Mutes/unmutes tuner audio output BA ...

  • Russound CAM6.6T-S1 - page 18

    18 USER INTERNAL SOURCE - AM/FM TUNER UNO-LRC1 Remote Contr ol UNO-LRC1 Contr ol of T uner Selecting the tuner T o select the tuner , push and choose the source number pr eassigned to the AM/FM tuner (1), or use the UNO numeric source inputs at the bottom of the UNO-LRC1. Selecting the desired band Push to toggle between AM/FM reception. Selecting ...

  • Russound CAM6.6T-S1 - page 19

    19 USER INTERNAL SOURCE - AM/FM TUNER UNO-LRC1 Remote Contr ol POWER - Power managed by CAM6.6 NUMERIC INPUT - (press) Number buttons for direct input of fr equency , preset, bank MEMORY PRESETS - (pr ess and hold) Number buttons (1-6) for saving memory presets TUNE UP/DOWN - Incrementally scr olls through tuned stations TUNE UP/DOWN - Incrementall ...

  • Russound CAM6.6T-S1 - page 20

    20 Do not connect the controller's main power feed until all other connections have been made and verified. Live connection or removal of the keypad wiring or other wiring when the system is powered can cause communication pr oblems in the network. Double-check terminations during each phase of the installation to prevent accidental damage. In ...

  • Russound CAM6.6T-S1 - page 21

    21 INST ALLER SECTION Getting Started Includes an installation overview , including tools needed and wiring instructions. Component Guides Reviews front and back panel featur es of the CAM6.6 contr oller and the UNO-S1 keypad. Keypad Installation Explains UNO-S1 keypad installation and wiring. Making Connections Details front and back panel connect ...

  • Russound CAM6.6T-S1 - page 22

    22 INST ALLER GETTING ST ARTED Unpacking the System Components • Keep the original carton and packing materials for future shipment or storage. • Check for any visible signs of damage. If you encounter any concealed damage, con- sult your Russound dealer before pr oceeding to install the unit. • Retain the sales receipt as it establishes the ...

  • Russound CAM6.6T-S1 - page 23

    23 INST ALLER WIRING INSTRUCTIONS RJ-45 Connections The CA T-5 T568A wiring standar d shown on the right is used for the RJ-45 terminations. Keypad Wiring For the UNO-S1 keypad, the following connec- tions are used to terminate the CA T-5 wir e to the 110 punchdown on the keypad: CA T -5 WIRE COLOR TYPE Br own . . . . . . . . . . . . . . . . . . . ...

  • Russound CAM6.6T-S1 - page 24

    24 17 16 14 12 13 15 19 18 20 CAM6.6 RNET LINK IN AND LINK OUT - Links multiple CAM6.6’ s, also links future Russound components that are RNET compatible RS-232 INTERF ACE - The RS-232 Inter face allows the zones to be controlled by PC or other devices that have an RS-232 Interface. The RS-232 Inter face also allows for firmware updates and pr og ...

  • Russound CAM6.6T-S1 - page 25

    25 OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, AM/FM radio module AC 240V-AC 110V Switch - Switches A/C input voltage between 110VAC and 240VAC AC 120/240 INPUT - Grounded 3-terminal plug detachable power cor d connection for the CAM6.6 FUSE HOLDER - Holds a replaceable fuse for A/C input connection 110VAC operation - F 3 ...

  • Russound CAM6.6T-S1 - page 26

    26 INST ALLER COMPONENT GUIDE UNO-S1 Keypad-Update Port Src 3 Data Rx TTL Level Data Tx TTL Level GND +12VDC Note: Do not put RS-232-level signals into the pins. Must use Advanced Programming Cable P/N 2500-521065. OS Update/Run Jumper -The pins are jumper ed when performing an OS update on the key- pad, and removed during normal operation. (T ypic ...

  • Russound CAM6.6T-S1 - page 27

    27 110 PUNCHDOWN CONNECTOR - T ermination for CA T-5 connection between the UNO-S1 Keypad and the CAM6.6 controller . 1 INST ALLER COMPONENT GUIDE UNO-S1 Keypad-CA T -5 Connection 1 N EWMARKET , NH U.S.A. DESIGNED IN USA MADE IN KOREA BR GR OR +12V BR/W +12V GND GR/W GND OR/W COM A BL/W COM B BL IR OUT UNO-S1 System Control Keypad ST A TUS IN CA T ...

  • Russound CAM6.6T-S1 - page 28

    28 INST ALLER UNO-S1 KEYP AD-INST ALLA TION Keypad Location The best infrared r emote performance is achieved with the keypad away from any dir ect sunlight, plasma TV , and low voltage lighting controls. Also consider convenience when choosing a location. Choose a place that is easily seen from the posi- tion where a person is most likely to be lo ...

  • Russound CAM6.6T-S1 - page 29

    29 CAM6.6 CA T-5 Cable CA T-5 Cable PM Mod 3D with RJ-45 CA T-5 Cable SA-ZX3 1201A/1A Pow er Supply CAM6.6X The UNO System Keypad Ports are located on the back of the CAM6.6 in the top left of center . Connections made at the UNO Keypad Ports are made using CA T-5 T568A RJ-45 wir e configura- tion. CA T-5 is color-coded for ease of installa- tion. ...

  • Russound CAM6.6T-S1 - page 30

    30 Source Audio Connections The CAM6.6 supports up to six audio sources. The Source Inputs ar e located at the back panel. The Source 1 input serves a dual purpose. If the CAM6.6 optional internal source is used, the Source 1 input is not available, and the switch next to it is set to “Internal Source Output.” If the Optional Internal Source is ...

  • Russound CAM6.6T-S1 - page 31

    31 INST ALLER MAKING CONNECTIONS Common IR Connection Common IR Connections The Common IR jack on the rear of the CAM6.6 allows control of any sour ce equipment without that source being selected on the keypad. The connection for the COM IR jack is made using an IR emitter with a 1/8’’ plug. The Russound 845.1 single IR emitter is recommended, ...

  • Russound CAM6.6T-S1 - page 32

    32 The speakers are connected to the CAM6.6 using modular snap connectors. Each of these color-coded connectors is designated for the speaker set of a particular amplified zone. T o avoid confusion, connect one zone speaker set at a time starting with Zone 1, taking care to keep zone and speaker wire identities straight. Note: An 8 Ohm minimum spea ...

  • Russound CAM6.6T-S1 - page 33

    33 The CAM6.6 has two Zone Audio outputs, on Zone 1 and Zone 2. Each of these zone audio output connections features a ster eo line out RCA connection plus a switch to allow for either a fixed or a variable line level output. When set to V ariable, the keypad volume level affects this output. In the Fixed position, the key- pad volume level will no ...

  • Russound CAM6.6T-S1 - page 34

    34 CAM6.6 12VDC Home Theater T rigger In This 12VDC T rigger input is used to control Power Management of the audio sources possibly being shared with a home theater system. When the last zone on the CAM6.6 is turned off, 12VDC presence to the trigger input will pr event the sources that ar e on fr om being turned of f. The connections for the trig ...

  • Russound CAM6.6T-S1 - page 35

    35 12VDC Mute T rigger In When 12VDC is applied to the Mute T rigger In, the system will fully mute any source that is con- nected to the Source Audio Input. The connec- tions for the trigger are made using a two-con- ductor cable with 1/8” male mini-plug jacks. The tip is positive (+) and sleeve is negative (-). This allows for the connection of ...

  • Russound CAM6.6T-S1 - page 36

    36 The RNET Link In and Link Out can be used to connect two to six CAM6.6 or CAV6.6 con- trollers. The connection is made using a CA T-5 patch cable from the Link Out of the master CAM6.6 and into the Link In of the next con- troller . Along with RNET data signals, the RNET Link In and Link Out jack passes the six source IR signals. These are only ...

  • Russound CAM6.6T-S1 - page 37

    37 The CAM6.6 supports RS-232 communication with various third party automation systems or PC for programming of the contr oller . The RS- 232 com port is located on the back of the CAM6.6 and uses a DB-9 cable connection. For RS-232 protocol and the backup PC application, see the Document Center at www .russound.com. Look for the T echnical Docume ...

  • Russound CAM6.6T-S1 - page 38

    38 INST ALLER MAKING CONNECTIONS Optional Internal Source - AM/FM T uner Antennas AM Antenna Connect the included loop antenna for AM recep- tion to the Optional Internal Source panel, attach- ing the GND (ground) and AM ends to the appr o- priately marked connections. FM Antenna Attach the included FM antenna for FM reception to the Optional Inter ...

  • Russound CAM6.6T-S1 - page 39

    39 Connecting an Alternate Outdoor Antenna for AM/FM The diagram below depicts a suggested installa- tion option of an alternate outdoor FM antenna and AM antenna. For best performance for AM reception, it is r ec- ommended to use an external outdoor or attic- mounted long wire antenna for best performance for AM reception. Use a 75-ohm to 300-ohm ...

  • Russound CAM6.6T-S1 - page 40

    40 Gr ounding an Outdoor Antenna If the tuner is used with an outdoor antenna, the antenna must be grounded against static char ges and voltage sur ges. Consult the instruc- tions that came with the antenna or contact the antenna manufacturer for pr oper installation instructions. The diagram above gives a general depiction of how an outdoor antenn ...

  • Russound CAM6.6T-S1 - page 41

    41 Before pr oceeding to the system pr ogramming section, it’s important to conduct an initial test to determine that the hardwar e components ar e working properly . 1. Connect the speaker wires fr om Zone #3 to the CAM6.6 Zone #3 speaker output connectors. 2. Connect an UNO-S1 keypad to Keypad Port #3 on the rear of the CAM6.6. 3. Connect a sou ...

  • Russound CAM6.6T-S1 - page 42

    42 This manual includes items that are designed to assist in the pr ogramming pr ocess. Forms (Pages 44-46) Three blank r epr oducible forms are included as planning tools when determining sour ces, settings and zone prefer ences. The Sour ce and Zone Information forms and the Macro Editor form should be completed before pr ogramming and r eferred ...

  • Russound CAM6.6T-S1 - page 43

    43 3. Basic Setup (SOURCE SETUP) (Pages 50-52) This procedur e is mandatory to set up each sour ce for keypad source contr ol and is the cornerstone of the programming pr ocess. 4. Peripheral Setup (Pages 48-50) (FOR OPTIONAL INTERNAL SOURCE) This procedur e pr ovides setup and naming procedur es for the tuner . It includes assigning a custom name ...

  • Russound CAM6.6T-S1 - page 44

    44 T uner Russound N/A Peripher al N/A N N/A N N/A N/A INST ALLER SETUP FORMS ...

  • Russound CAM6.6T-S1 - page 45

    45 Mute INST ALLER SETUP FORMS ...

  • Russound CAM6.6T-S1 - page 46

    46 INST ALLER SETUP FORMS ...

  • Russound CAM6.6T-S1 - page 47

    47 There ar e thr ee item types in the installation menu: Menu Item – Acts as a folder that holds procedur es and/or featur e parameters. Pr ocedure – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key . Once you begin a procedure, the system will pr ompt for the information needed to complete the tas ...

  • Russound CAM6.6T-S1 - page 48

    The following items make up the Installation Menu: PERIPH SETUP (Per Su) SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) PERIPH SETUP (PerSu) Peripheral Setup allows the CAM6.6’ s optional internal source to be configur ed. The following items can be found in ...

  • Russound CAM6.6T-S1 - page 49

    INST ALLER INST ALLA TION MENU 2. BANK NAME – Use the volume up/down keys to select a character and left/right (BnkNm) keys to change a character position. A blinking cursor indicates placement of the character being entered. Names can be fr om 1 to 5 characters in length. If adding names from 6-12 characters, it is suggested you use an optional ...

  • Russound CAM6.6T-S1 - page 50

    50 INST ALLER INST ALLA TION MENU SYSTEM INFO (SInfo) System Info shows the tuner’ s manufacturing build properties. See Periph Setup - Flow Chart on page 64 BUILD TIME (BTime) BUILD DA TE (BDate) VERSION (V er) 1. BUILD TIME Displays the firmware Build Time of the tuner . (BTime) 2. BUILD DA TE Displays the firmware Build Date of the tuner . (BD ...

  • Russound CAM6.6T-S1 - page 51

    51 INST ALLER INST ALLA TION MENU 2. SOURCE NAME – Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.). (Name) 3. COMMAND TYPE – Select the type of command template (e.g., CD, TV , etc.). Selecting (CmdTp) the command type template will tell the CAM 6.6 how to configure the key’ s command and text for the source component. a. Select ...

  • Russound CAM6.6T-S1 - page 52

    52 INST ALLER INST ALLA TION MENU 9. AUTO PLA Y? – “Y es” tells the CAM6.6 to issue a PLA Y command whenever the (AtoPl) source is selected for listening. This option is skipped if the source type (COMMAND TYPE) chosen does not have a PLA Y command associated with it. 10. SAVE CHANGES? – Select “yes” to save changes. Procedur e r eturns ...

  • Russound CAM6.6T-S1 - page 53

    INST ALLER INST ALLA TION MENU i. MACRO - Macro loads a series of commands which ar e processed when (Macro) activated. ii. MACRO ID – Enter the macro ID number . Menu advances to SAVE CHANGES (MacID) (step 9) e. All Other Selections: Pr ocedure advances to DEVICE CODE (step 7) 7. DEVICE CODE – Enter source component code number listed in this ...

  • Russound CAM6.6T-S1 - page 54

    54 INST ALLER INST ALLA TION MENU 1. SOURCE NUM – Select the source number this function will be configur ed for . (Src #) 2. USE NUM IR? – T ells the system whether the source component has numeric (NumIR) scrolling, such as 100-disc CD player . A selection of “no” disables Numeric IR and advances to SAVE CHANGES 3. HIGHEST NUM – Enter t ...

  • Russound CAM6.6T-S1 - page 55

    55 INST ALLER INST ALLA TION MENU 9. SUFFIX CMD – T ells the system whether a command will be issued after the (Sufix) selection of the numerical value (e.g., 1, 2 Enter ). If “no,” proce- dure advances to SA VE CHANGES (step 13) 10. COMMAND TYPE – Select the type of source command (e.g., CD, TV , etc.). (CmdTp) a. Selected: Learned IR Choo ...

  • Russound CAM6.6T-S1 - page 56

    INST ALLER INST ALLA TION MENU 2. COMMAND TYPE – Select the type of source command (e.g., CD, TV , etc.). (CmdTp) a. Selected: Learned IR Choose Learned IR if the pre-pr ogrammed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned source bank to be assigned to the sour ce (LnSrc) component. Procedu ...

  • Russound CAM6.6T-S1 - page 57

    57 INST ALLER INST ALLA TION MENU Zone Setup allows the installer to adjust properties of the UNO Keypad contr olled CAM6.6 zone. This series of menus allows the system’ s zones to be configured for these pr operties: ZON VOL TRIM (ZonVT) SYSON ENABLE (SysOn) P ARTY ENABLE (PtyEn) MASTER ENABL (MstEn) MUTE ENABLE (MutEn) 1. ZON VOL TRIM This feat ...

  • Russound CAM6.6T-S1 - page 58

    58 INST ALLER INST ALLA TION MENU All settings including source equipment IR commands will need to be reenter ed. An “Ar e you sure?” pr ompt and a “no” response allows the installer to cancel the reset; a “yes” at the pr ompt will load factory/default settings. POWER MANAGEMENT (PwMgt) The CAM6.6 is capable of managing the power state ...

  • Russound CAM6.6T-S1 - page 59

    59 i. MACRO - Macro loads a series of commands which ar e processed when (Macro) activated. ii. MACRO ID – Enter the macro ID number . Menu advances to POWER OFF CMD (MacID) (step 6) e. All Other Selections: Procedur e advances to DEVICE CODE (step 4) 4. DEVICE CODE – Sour ce component code for IR control. (DevCd) 5. KEY FUNCTION – Select a f ...

  • Russound CAM6.6T-S1 - page 60

    60 9. KEY FUNCTION (f) – Select Keypad function. (KeyFn) 10. SAVE CHANGES? (f) – Select “yes” to save the changes. (Save?) LEARN IR (LrnIR) This procedur e allows IR commands to be learned into the system and be centrally stor ed in the main controller to let the system access the same IR codes that operate the sour ce equipment. NOTE: IR c ...

  • Russound CAM6.6T-S1 - page 61

    61 commands including other macros and delays. See Macr o Editor - Flow Char t on page 74 1. MACRO ID – Number of Macro up to 132 including any pr eviously named (MacID) macr os. 2. MACRO NAME – Name of Macr o (optional). (MacNm) 3. COMMAND NUM – Number of Command up to 10. (Cmd#) 4. COMMAND TYPE – Select the type of source command (e.g., C ...

  • Russound CAM6.6T-S1 - page 62

    62 SYSTEM INFO (SInfo) System Info allows the installer to view the controller’ s manufacturing build properties. See System Info - Flow Chart on page 75 #CONTROLLERS (#Ctls) BUILD TIME (BTime) BUILD DA TE (BDate) VERSION (V er) 1. #CONTROLLERS Displays the number of CAM6.6 controllers in the system. (#Ctls) 2. BUILD TIME Displays the Software Bu ...

  • Russound CAM6.6T-S1 - page 63

    63 PERIPH SETUP Menu MEM NAME Procedure CONTROLLR ID Procedure BANK # BANK NAME SA VE CHANGES? Selects character Selects character position Repeat for each character in name BANK # MEMORY # MEMORY NAME Selects character Selects character position Repeat for each character in name SA VE CHANGES? BANK NAME Procedure P eripheral Setup: Memor y Name, B ...

  • Russound CAM6.6T-S1 - page 64

    64 PERIPH SETUP Menu MEM NAME Procedure CONTROLLR ID Procedure BANK NAME Procedure Peripheral Setup: Controller ID, Region, Factor y Init, System Info REGION Procedure F ACTORY INIT Procedure SYSTEM INFO Procedure Peripheral Menu This Procedure returns the ST2 Tuner to its Factory settings Are you sure YES NO Please wait Cycle Power Controller:# Al ...

  • Russound CAM6.6T-S1 - page 65

    65 PERIPH SETUP Menu Peripheral INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 66

    66 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 67

    67 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 68

    68 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 69

    69 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 70

    70 PERIPH SETUP Menu MUTE INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 71

    71 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 72

    72 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 73

    73 PERIPH SETUP Menu LED on rear CAM Panel blinks fast INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 74

    74 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 75

    75 PERIPH SETUP Menu INST ALLER SETUP MENU FLOW CHARTS ...

  • Russound CAM6.6T-S1 - page 76

    76 Device Codes for TVs: AOC 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463 CXC 0180 Candle 0030, 0056 Ca ...

  • Russound CAM6.6T-S1 - page 77

    77 INST ALLER IR CODES Philips 1818, 1061 Pioneer 1010 Princeton 0113, 0295 Samsung 1190, 1204 Sensory Science 1126 Sharp 1010 Sony 0850 Device Codes for SA T/DSS: AlphaStar 0772 Chaparral 0216 Crossdigital 1109 Echostar 0775, 1005 Expressvu 0775 GE 0566 GOI 0775 General Instrument 0869 HTS 0775 Hitachi 0819 Hughes Net. Sys. 0749, 1142, 1749 JVC 07 ...

  • Russound CAM6.6T-S1 - page 78

    78 INST ALLER IR CODES Realistic 0203 Sony 0201, 0193 T echnics 0204 Device Codes f o r DVD Players: Aiwa 0641 Apex Digital 0672, 0755, 0794, 0795, 0796, 0797, 0830 Blue Parade 0571 Broksonic 0695 Daewoo 0784 Denon 0490, 0634 Emerson 0591 Enterprise 0591 Fisher 0670 GE 0522 Go Video 0715, 0783 Gradiente 0651 Harman/Kardon 0582, 0702 Hitachi 0573, 0 ...

  • Russound CAM6.6T-S1 - page 79

    79 INST ALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Do w n Po w er Po w er Po w er O ...

  • Russound CAM6.6T-S1 - page 80

    80 KEY FUNCTION UNO-S1 TV (HDTV) O ff O ff O ff , Po w er On/O ff 11 11 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue Learn ...

  • Russound CAM6.6T-S1 - page 81

    81 INST ALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Do w n Po w er Po w er Po w er On/O ff E ...

  • Russound CAM6.6T-S1 - page 82

    82 KEY FUNCTION UNO-S1 CABLE PIP Chan Up PIPCU Learned Onl y PIP Chan Dn PIPCD Learned Onl y Input 1 In 1 A , V ID1, V ideo,T V p1 Input 2 In 2 B, V ID2,T V p2 Input 3 In 3 C, V ID3,T V p3 Input 4 In 4 V ID4,T V p4 Input 5 In 5 V ID5, AV 1, V CR,BNC Input 6 In 6 V ID6, AV 2, V DP ,D V D,D V I Input 7 In 7 T V , Component Input 8 In 8 C A B, SA T, S ...

  • Russound CAM6.6T-S1 - page 83

    83 INST ALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Do w n Po w er Po w er Po w er O ...

  • Russound CAM6.6T-S1 - page 84

    84 KEY FUNCTION UNO-S1 VIDEO ACC O ff O ff O ff , Po w er On/O ff 1 1 1 1 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue Lea ...

  • Russound CAM6.6T-S1 - page 85

    85 INST ALLER KEY CODES SA T/DSS KEY FUNCTION UNO-S1 SA T/DSS 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Do w n Po w er Po w er Po w er On/ ...

  • Russound CAM6.6T-S1 - page 86

    86 KEY FUNCTION UNO-S1 SA T/DSS PIP Chan Up PIPCU Learned Onl y PIP Chan Dn PIPCD Learned Onl y Input 1 In 1 V ID1, V ideo,T V p1 Input 2 In 2 V ID2,T V p2 Input 3 In 3 V ID3,T V p3 Input 4 In 4 V ID4,T V p4 Input 5 In 5 V ID5, AV 1, V CR,BNC Input 6 In 6 V ID6, AV 2, V DP ,D V D,D V I Input 7 In 7 T V , Component Input 8 In 8 C A B, SA T, S - V id ...

  • Russound CAM6.6T-S1 - page 87

    87 INST ALLER KEY CODES VCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mutte Mute Channel Up Ch Up Channel Up Channel Dn Ch Dn Channel Do w n Po w er Po w er Po w er On/O ff Ente ...

  • Russound CAM6.6T-S1 - page 88

    88 KEY FUNCTION UNO-S1 VCR O ff O ff O ff , Po w er On/O ff 11 11 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue Learned Onl ...

  • Russound CAM6.6T-S1 - page 89

    89 INST ALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Learned Onl y Channel Dn Ch Dn Learned Onl y Po w er Po w er Po ...

  • Russound CAM6.6T-S1 - page 90

    90 KEY FUNCTION UNO-S1 LASER DISC O ff O ff O ff , Po w er On/O ff 1 1 1 1 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue Le ...

  • Russound CAM6.6T-S1 - page 91

    91 INST ALLER KEY CODES DVD KEY FUNCTION UNO-S1 DVD 1 1 Digit 1, T raack 1 2 2 Digit 2, T rack 2 3 3 Digit 3, T rack 3 4 4 Digit 4, T rack 4 5 5 Digit 5, T rack 5 6 6 Digit 6, T rack 6 7 7 Digit 7, T rack 7 8 8 Digit 8,T rack 8 9 9 Digit 9, T rack 9 0 0 Digit 0, T rack 10 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute M ...

  • Russound CAM6.6T-S1 - page 92

    92 KEY FUNCTION UNO-S1 DVD O ff O ff O ff , Po w er On/O ff 1 1 1 1 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue Learned O ...

  • Russound CAM6.6T-S1 - page 93

    93 INST ALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Preset Do w n Po w er Po w er Po w er On/O ...

  • Russound CAM6.6T-S1 - page 94

    94 KEY FUNCTION UNO-S1 RECEIVER O ff O ff O ff , Po w er On/O ff 11 11 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue Learne ...

  • Russound CAM6.6T-S1 - page 95

    95 INST ALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Preset Up Channel Dn Ch Dn Preset Do w n Po w er Po w er P ...

  • Russound CAM6.6T-S1 - page 96

    96 KEY FUNCTION UNO-S1 AMP/MISC AUDIO O ff O ff O ff , Po w er On/O ff 1 1 1 1 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cu ...

  • Russound CAM6.6T-S1 - page 97

    97 INST ALLER KEY CODES CD KEY FUNCTION UNO-S1 CD 11 Digit 1, T rack 1,Dsc1 22 Digit 2, T rack 2,Dsc2 33 Digit 3, T rack 3,Dsc3 44 Digit 4, T rack 4,Dsc4 55 Digit 5, T rack 5,Dsc5 66 Digit 6, T rack 6,Dsc6 77 Digit 7, T rack 7,Dsc7 88 Digit 8,T rack 8,Dsc8 99 Digit 9, T rack 9,Dsc9 00 Digit 0, T rck10,Dsc10 V olume Up V olUp V olume Up V olume Do w ...

  • Russound CAM6.6T-S1 - page 98

    98 KEY FUNCTION UNO-S1 CD O ff O ff O ff , Po w er On/O ff 1 1 1 1 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue Learned On ...

  • Russound CAM6.6T-S1 - page 99

    99 INST ALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up V olume Do w n V olDn V olume Do w n Mute Mute Mute Channel Up Ch Up Bright,Raise Up Channel Dn Ch Dn Dim,Lo w er Do w n Po w er Po ...

  • Russound CAM6.6T-S1 - page 100

    100 KEY FUNCTION UNO-S1 HOME CONTROL O ff O ff O ff , Po w er On/O ff 1 1 1 1 Learned Onl y 12 12 Learned Onl y 13 13 Learned Onl y 14 14 Learned Onl y 15 15 Learned Onl y 16 16 Learned Onl y Bright Brght Learned Onl y Dim Dim Learned Onl y Close Close Learned Onl y Open Open Learned Onl y Halt Halt Learned Onl y A M/FM A M/FM Learned Onl y Cue Cue ...

  • Russound CAM6.6T-S1 - page 101

    101 INST ALLER SOURCE NAMES UNO-S1 UNO-S2 A ux A UX A ux 1 A UX 1 A ux 2 A UX 2 Blues Blues Cable Cable Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2 CDCh3 CD Changer 3 CD CD Pla y er CD 1 CD Pla y er 1 CD 2 CD Pla y er 2 CD 3 CD Pla y er 3 Class Classical Compr Computer Cntr y Countr y CustomName1 ...

  • Russound CAM6.6T-S1 - page 102

    UNO-S1 UNO-S2 RepT V Repla y T V Rock Rock S at S atellite S at 1 S atellite 1 S at 2 S atellite 2 S at 3 S atellite 3 S atRd S at Radio S rc 1 S ource 1 S rc 2 S ource 2 S rc 3 S ource 3 S rc 4 S ource 4 S rc 5 S ource 5 S rc 6 S ource 6 S rc 7 S ource 7 S rc 8 S ource 8 S pcl S pecial T ape T ape T ape1 T ape 1 T ape2 T ape 2 Ti V o TI V O T uner ...

  • Russound CAM6.6T-S1 - page 103

    CAM6.6 CAM6.6 Back Panel (C ontroller ID 2) CAM6.6 Back Panel (C ontroller ID 1) CAM6.6 102.5 102.5 102.5 RCA Cables 102.5 102.5 102.5 UNO-S1 UNO-S1 Sharing a single CAM6.6T (internal tuner) with multiple controllers This arrangement can support up to six CAM6.6 units for up to 36 zones/6 sources. Each additional CAM6.6 must have an incremental Con ...

  • Russound CAM6.6T-S1 - page 104

    104 CAM6.6 CAM6.6 Back Panel (C ontroller ID 2) CAM6.6 Back Panel (C ontroller ID 1) CAM6.6 102.5 102.5 102.5 92.5 92.5 92.5 UNO-S1 UNO-S1 SAMPLE CONFIGURA TIONS MUL TIPLE CONTROLLERS WITH TWO TUNERS System with two CAM6.6T (internal tuner) controllers The configuration below is suitable for 7 to 12 zones that will have access to the tuner in the c ...

  • Russound CAM6.6T-S1 - page 105

    105 SAMPLE CONFIGURA TIONS MUL TIPLE CONTROLLERS WITH THREE TUNERS Sharing an ST2 Dual T uner with multiple CAM6.6 con- trollers (with and without tuners) The configuration below is suitable for 7 to 12 zones that can access the ST2 Dual T uner and the CAM6.6T tuner . This configuration uses RCA “Y” cables from the ST2 T uner source outputs to ...

  • Russound CAM6.6T-S1 - page 106

    106 CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 RS-232 INTERFACE IR LR A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR LR A UDIO O UTPUT ST2 Dual Tuner Back P anel 102.5 102 ...

  • Russound CAM6.6T-S1 - page 107

    107 TECHNICAL SPECIFICA TIONS Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 1dB Watts per channel: 20 Watts RMS into 8 Ohms THD+N: <0.05% Signal to Noise R ...

  • Russound CAM6.6T-S1 - page 108

    108 WARRANTY & REP AIR The Russound CAM6.6 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will r eplace any defective par ts and correct any defect in workmanship without char ge for either parts or labor . For this warranty to apply , the unit must ...

  • Russound CAM6.6T-S1 - page 109

    109 NOTES ...

  • Russound CAM6.6T-S1 - page 110

    110 NOTES ...

  • Russound CAM6.6T-S1 - page 111

    111 NOTES ...

  • Russound CAM6.6T-S1 - page 112

    Copyright © 2004 Russound ® All rights reserved. 28-0111 10/07/04 Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www .russound.com ...

Manufacturer Russound Category Stereo System

Documents that we receive from a manufacturer of a Russound CAM6.6T-S1 can be divided into several groups. They are, among others:
- Russound technical drawings
- CAM6.6T-S1 manuals
- Russound product data sheets
- information booklets
- or energy labels Russound CAM6.6T-S1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Russound CAM6.6T-S1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Russound CAM6.6T-S1, service manual, brief instructions and user manuals Russound CAM6.6T-S1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Russound CAM6.6T-S1.

Similar manuals

A complete manual for the device Russound CAM6.6T-S1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Russound CAM6.6T-S1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Russound CAM6.6T-S1.

A complete Russound manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Russound CAM6.6T-S1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Russound CAM6.6T-S1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Russound CAM6.6T-S1, that we can find in the current document
3. Tips how to use the basic functions of the device Russound CAM6.6T-S1 - which should help us in our first steps of using Russound CAM6.6T-S1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Russound CAM6.6T-S1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Russound CAM6.6T-S1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Russound CAM6.6T-S1?

Use the form below

If you did not solve your problem by using a manual Russound CAM6.6T-S1, ask a question using the form below. If a user had a similar problem with Russound CAM6.6T-S1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)