English dropdown-ico

Manual Panasonic BT-LH910G

76 pages 16.63 mb
Download

Go to site of 76

Summary
  • Panasonic BT-LH910G - page 1

    SS0311HM0 -PS D Printed in Japan ENGLISH Model No. BT-LH910G Operating Instructions LCD Video Monitor Before operating this product, please read the instructions carefully and save this manual for future use. VQT3N15 ...

  • Panasonic BT-LH910G - page 2

    2 Read this first ! indicates safety information. DO NOT REMOVE P ANEL COVERS BY ■ UNSCREWING THEM. No user serviceable parts inside. Refer servicing to qualified service personnel. W ARNING: T o reduce the risk of fire, do not expose this • equipment to rain or moisture. T o reduce the risk of fire hazard, keep this • equipment away fr ...

  • Panasonic BT-LH910G - page 3

    3 Read this first ! (continued) EMC NOTICE FOR THE PURCHASER/USER OF THE APP ARA TUS 1. Applicable standards and operating environment The apparatus is compliant with: standards EN55103-1 and EN55103-2 2009, and • electromagnetic environments E1, E2, E3 and E4. • 2. Pre-requisite conditions to achieving compliance with the above standards ...

  • Panasonic BT-LH910G - page 4

    4 Read this first ! (continued) IMPORT ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do ...

  • Panasonic BT-LH910G - page 5

    5 Contents Read this first ! ..................................................... 2 T ransportation precautions ................................. 4 Standard accessories · Optional units ............... 5 About this instruction manual ............................. 5 Precautions for Use .............................................. 6 Request ..... ...

  • Panasonic BT-LH910G - page 6

    6 Precautions for Use The LCD screen is manufactured to precise ● specifications. Although over 99.99 % of the pixels function normally , 0.01 % of the pixels are either missing or constantly lit (red, blue or green). This is normal and not a cause for concern. The protection panel and liquid crystal panel is a ● specially manufactured componen ...

  • Panasonic BT-LH910G - page 7

    7 Outline This unit is a liquid crystal display monitor for broadcasting and business use that is equipped with a 23 cm (9.0 inch) (effective display area) liquid crystal display . It can be used as a VF (viewfinder) for broadcasting and business cameras made by Panasonic. High Performance Liquid Crystal Panel ■ This product incorporates a WXGA ( ...

  • Panasonic BT-LH910G - page 8

    8 Selecting Area of Use The unit is shipped with the area of use set to the initial setting (NTSC) state. Before using the unit, select the area of use. When you set the area of use, the factory default setting of the menu item on the right is set to the value that matches the area of use. (For the procedure to restore the menu setting values to th ...

  • Panasonic BT-LH910G - page 9

    9 Dimensions Unit: mm(inches) 78.5 (3-7/8) 65.5 (2-9/16) 11.5(7/16) M3 M3 M3 M3 25.5 (1) 48.5 (1-15/16) 148.5 (5-7/8) 230 (9-1/16) 195.7 (7-11/16) 118.2 (4-5/8) 46 (1-13/16) 170 (6-11/16) 98.5 (3-7/8) 183 (7-3/16) 214.5 (8-7/16) 20.2 (13/16) 204 (8-1/16) 3/8-16UNC * 1 3/8-16UNC 46 (1-13/16) 17.55 (11/16) 3/8-16UNC 3/8-16UNC 20.2 (13/16) 210 (8-1/4) ...

  • Panasonic BT-LH910G - page 10

    10 Controls and Their Functions Front panel 2 3 1 F-IN-R BT-LH 9 10 CON T ./ B. LIGHT VOLU ME/ BRIGHT PEAK/ PHASE CHRO MA 1 HEADPHONES output jack (M3 stereo mini jack) Allows you to connect headphones to check the audio when inputting an SDI signal or HDMI signal. * The volume and sound quality dif fer depending on the headphones. In 3D assist mod ...

  • Panasonic BT-LH910G - page 11

    11 6 7 5 4 8 F-IN-R BT-LH 9 10 CON T ./ B. LIGHT VOLU ME/ BRIGHT PEAK/ PHASE CHRO MA 4 MENU, FUNCTION buttons Use these buttons to display menus, select and adjust settings and confirm menu selections. MENU : Press to open a menu, exit a menu or return to a previous menu. / FUNCTION1 : Moves the cursor downwards and selects items. It also confirms ...

  • Panasonic BT-LH910G - page 12

    12 Controls and Their Functions (continued) Functions in 3D assist mode Knob1 MIRROR (MIRROR) / HORIZONT AL (SHIFT) / MODE (CONVERGENCE) / SIZE (COLOR) / ZOOM (ZOOM FOCUS) / EXP AND (VERTICAL) / OVERLA Y (OVERLA Y) Knob2 VERTICAL (SHIFT) / MANUAL (CONVERGENCE) / FOCUS-IN-RED (ZOOM FOCUS) / MARKER1 (VERTICAL) / MARKER (OVERLA Y) Knob3 SPEED (CONVERG ...

  • Panasonic BT-LH910G - page 13

    13 9 REAR T ALL YS (red) Can be lit by a control signal from a GPI/ camera. 10 SDI1 (HD/SD) input terminal (BNC) This is the SDI1 input terminal. (Compatible with HD/SD automatic switching, Compatible with 3G-SDI) When you use 3D assist mode (page 51), input images for the left eye (L). 11 SDI1 active through output terminal This terminal outputs S ...

  • Panasonic BT-LH910G - page 14

    14 Supplying the power An Anton/Bauer battery pack or V -mount type battery pack and external DC power supply can be used to power this unit. Using an Anton/Bauer battery Batteries for which connection verified ■ HYTRON 50 • DIONIC 90 • DIONIC HC • Install the Anton/Bauer battery pack. 1. Insert the battery pack and slide it in the 2. direc ...

  • Panasonic BT-LH910G - page 15

    15 Connect the external DC power supply to the 1. DC IN socket on this unit. T urn “ON” the external DC power supply switch. 2. (Where the external DC power supply has a power switch) T urn “ON” the POWER switch on this unit. 3. If an external DC power supply is used, then check the ratings of the external DC power supply so that they are c ...

  • Panasonic BT-LH910G - page 16

    16 VF Function The unit can be connected to broadcasting and business cameras made by Panasonic and used as a VF (viewfinder). If you want to use the unit as a VF (viewfinder), remove the tilt stand (page 17). Camera platform * 1 (commercially available) VF cable (Option) Part number: BT-CS910G Camera side VF terminal VF connector on unit side Use ...

  • Panasonic BT-LH910G - page 17

    17 How to Remove the T ilt Stand When you do not want to use the tilt stand such as when using the unit as a VF (viewfinder), remove the tilt stand mounting screw (four screws) with a Phillips driver and then remove the tilt stand from the unit. When attaching the tilt stand, make sure to align the protrusions for alignment with the corresponding a ...

  • Panasonic BT-LH910G - page 18

    18 On-screen Display The screen shows information such as the operating status display , picture adjusting knob status, sharpness display , function display , audio level meter display , time code display , closed caption display , DC power supply voltage and battery level display , and menu display . Operating status display DC14.0V YP B P R 1080/ ...

  • Panasonic BT-LH910G - page 19

    19 On-screen Display (continued) Picture and volume adjusting knobs status display PHASE CHROMA EXIT BRIGHT B.LIGHT PEAK F-IN-R 20 [ PHASE ] VOLUME CONT . CON T ./ B. LIGHT VOL UME / BRIGHT PEAK/ PHASE CHRO MA F-IN-R Picture adjusting knob (page 1 1) These are rotary push knobs. • If you press a knob, the setting value state • appears at the bo ...

  • Panasonic BT-LH910G - page 20

    20 Audio level meter display 1 1 3 3 5 5 7 7 2 2 4 4 6 6 8 8 SDI1 1080/60i Channel display Reference point 0 dB point Peak hold Overrange A color skeleton bar meter indicates the audio • level for SDI signals and HDMI signals. The display method of the audio level meter can • be set in the menu (page 49). In 3D assist mode, the audio of the SDI ...

  • Panasonic BT-LH910G - page 21

    21 On-screen Display (continued) Closed caption (CC) display Closed caption display area Closed caption display area (When the specified window extends out of the entire screen) CLOSED CAPTION can be displayed when SDI • signals and VIDEO signals are input. CLOSED CAPTION complies with the following • standards. Composite Standard EIA/CEA-608 ( ...

  • Panasonic BT-LH910G - page 22

    22 How to Use the On Screen Menu Menu display MENU EXIT SEL. ENTER ENTER [MAIN MENU] 2D/3D ASSIST MARKER VIDEO CONFIG SYSTEM CONFIG VF CONFIG FUNCTION GPI INPUT SELECT DISPLA Y SETUP CONTROL HOURS METER 2D Displays the operation explanation for the menu button. This is the menu display . • The menu display disappears after 2 minutes of • inacti ...

  • Panasonic BT-LH910G - page 23

    23 User Data Y ou can save and load up to five combinations of menu settings and adjustments made with the picture adjustment knob as user data. Y ou can also return settings and adjustments to their factory defaults. User data include the following settings. Menu settings except “SETUP LOAD/SA VE” and “REMOTE in CONTROL” (including button ...

  • Panasonic BT-LH910G - page 24

    24 Main Menu Menu configuration VIDEO CONFIG SYSTEM CONFIG VF CONFIG WHITE BALANCE FUNCTION INPUT SELECT GPI MARKER MAIN MENU 2D/3D ASSIST GAMMA SELECT FILM GAMMA COLOR TEMP. SHARPNESS MODE SHARPNESS H SHARPNESS V I-P MODE MONO ANAMO SD ASPECT SCAN VF CONTROL REAR TALLY ZEBRA SUB WINDOW MENU POSITION STATUS DISPLAY BATTERY REMAIN WARNING VOLTAGE SE ...

  • Panasonic BT-LH910G - page 25

    25 Main Menu (continued) 2D/3D ASSIST The underlined values are factory preset setting values. Setting Description 2D 3D ASSIST Switches between 2D mode and 3D assist mode. <2D> Operates in 2D mode. <3D ASSIST> Operates in 3D assist mode. If you switch to 3D assist mode, the channel setting is forcefully switched to SDI1 (SDI2). Use kno ...

  • Panasonic BT-LH910G - page 26

    26 Sub menu Settings Description 4:3 * 2 * 4 OFF 95% 93% 90% 88% 80% USER 85% Selects/displays the marker type for when the angle of view of the displayed image is 4:3. <OFF> No marker display <95%> 95 % area marker <93%> 93 % area marker <90%> 90 % area marker <88%> 89 % area marker (TYPE1) 88 % area marker (TYPE2) &l ...

  • Panasonic BT-LH910G - page 27

    27 Main Menu (continued) Sub menu Settings Description GPI MARKER1 * 5 4:3 13:9 14:9 CNSCO 2.39 CNSCO 2.35 2:1 VIST A 95% (16:9) 93% (16:9) 90% (16:9) 88% (16:9) 80% (16:9) USER(16:9) 95% (4:3) 93% (4:3) 90% (4:3) 88% (4:3) 80% (4:3) USER(4:3) GPI MARKER1 : Selects the marker displayed by the GPI terminal “MARKER1 ON/OFF” (page 62) operation. G ...

  • Panasonic BT-LH910G - page 28

    28 Main Menu (continued) T ypes of MARKER 16:9 marker ■ (Displayed when using HD, or when using SD with a 16:9 aspect ratio) The marker is only displayed as a vertical bar . In addition, the section becomes the “MARKER BACK” item. 4:3 marker 13:9 marker 14:9 marker VIST A marker , 2:1 marker , CNSCO marker A horizontal dotted line is displaye ...

  • Panasonic BT-LH910G - page 29

    29 Main Menu (continued) 4:3 marker ■ (Displayed for SD input in 4:3 aspect ratio mode) This marker is displayed as a dotted line. 95 % Area marker 93 % Area marker 90 % Area marker 88 % Area marker 80 % Area marker (Displayed for HD input and SD input in 16:9 ratio mode.) This marker is displayed as a dotted line. 95 % Area marker 93 % Area mark ...

  • Panasonic BT-LH910G - page 30

    30 VIDEO CONFIG The underlined values are factory preset setting values. Sub menu Settings Description GAMMA SELECT * 1 ST ANDARD FILM STDIO/PST Selects gamma curve. <ST ANDARD> Standard mode <FILM> Film mode <STDIO/PST> Color emphasis mode (a mode that approximates CRT display capability suitable for studio or postproduction appl ...

  • Panasonic BT-LH910G - page 31

    31 Main Menu (continued) Sub menu Settings Description SHARPNESS MODE * 4 HIGH LOW Selects the width of outline correction edge. <HIGH> Narrow edge <LOW> Wide edge SHARPNESS H * 4 0 - 30 Sets horizontal outline correction. The item display moves to the lower part of the screen during adjustment. SHARPNESS V * 4 0 - 30 Sets vertical outl ...

  • Panasonic BT-LH910G - page 32

    32 WB (WHITE BALANCE) adjustment mode ■ Select “V AR1” to “V AR3” for “COLOR TEMP .” in the “VIDEO CONFIG” menu to make “WHITE BALANCE V AR1” to “WHITE BALANCE V AR3” (WB) adjustments. The underlined values are factory preset setting values. Sub menu Settings Description COLOR TEMP . * 1 USER 0 - 63 D93 D65 D56 Selects the ...

  • Panasonic BT-LH910G - page 33

    33 Main Menu (continued) GAIN/BIAS RGB direct adjustment mode ■ If you press [ENTER] when the [GAIN] or [BIAS] item is selected in the WHITE BALANCE V AR (1 to 3) menu, the screen switches to the o ne below and you can use the picture adjusting knobs to directly adjust the RGB while checking the picture. R is assigned to knob 1, G to knob 2, and ...

  • Panasonic BT-LH910G - page 34

    34 Main Menu (continued) SYSTEM CONFIG The underlined values are factory preset setting values. Sub menu Settings Description SUB WINDOW FULL P ART Selects sub-window type. <FULL> Reduces the entire images for both input signals and places them side by side. <P ART> Cuts out the center of the images for both input signals and places the ...

  • Panasonic BT-LH910G - page 35

    35 Main Menu (continued) Sub menu Settings Description COLOR SP ACE * 5 SMPTE-C EBU ITU-709 * 6 Sets the studio standard color space. POWER SA VE MODE OFF ON Sets the power save mode <ON> The backlight dims when no signal (NO SIGNAL) is input for 60 seconds or longer . Signal input or menu operation will return the backlight to its normal bri ...

  • Panasonic BT-LH910G - page 36

    36 • When using the CA-210 display color analyzer , be sure to set the compensation values shown on the right. If they are not set, correct calibration will not be performed. For details on setup procedures, refer to the CA-210 User's Guide. There is no compensation when using Display Color Analyzer CA-310. • T urn on this unit and perform ...

  • Panasonic BT-LH910G - page 37

    37 Main Menu (continued) RESET operation Press [ 1. ][ ] in the “SYSTEM CONFIG” menu, select the [CALIBRA TION] submenu and press [ENTER]. Press [ 2. ][ ], select the [RESET] submenu and press [ENTER]. MENU EXIT SEL. ENTER ENTER [RESET] YES NO Select “YES” and press [ENTER]. 3. This starts calibration. MENU EXIT SEL. ENTER ENTER [RESET] xxx ...

  • Panasonic BT-LH910G - page 38

    38 Main Menu (continued) FUNCTION The underlined values are factory preset setting values. Sub menu Settings Description FUNCTION 1 - FUNCTION 3 HV DELA Y BLUE ONL Y GAMMA SELECT SD ASPECT SCAN SUB WINDOW WFM/VECTOR MARKER WHITE BALANCE PIXEL T O PIXEL PIXEL POSITION FOCUS-IN-RED ZEBRA REAR T ALL Y LEVEL METER CROSS HA TCH MONO BLACK MODE TIME CODE ...

  • Panasonic BT-LH910G - page 39

    39 Main Menu (continued) Sub menu Settings Description (From the previous page) <FOCUS-IN-RED> * 3 * 5 Used to highlight in red the section of the image that is being focused. <ZEBRA> Used to set the zebra display ON or OFF for the camera. <REAR T ALL Y> * 2 * 6 Used to set the rear tally ON or OFF . <LEVEL METER> * 2 Turns ...

  • Panasonic BT-LH910G - page 40

    40 Main Menu (continued) FUNCTION setting restrictions ■ Under the following conditions, “INV ALID FUNCTION” is displayed and the settings cannot be configured. Settings Inoperable Condition or Mode HV DELA Y SUB WINDOW • WFM • PIXEL T O PIXEL • 3D ASSIST • When HDMI (640 x 480) input • GAMMA SELECT When GPI is set • When HDMI (64 ...

  • Panasonic BT-LH910G - page 41

    41 Main Menu (continued) Functions displayed during FUNCTION button operation ■ Pressing any of the [FUNCTION1] to [FUNCTION3] buttons displays the operations assigned to each button as shown below . HV DELA Y • DELA Y OFF/H DELA Y/V DELA Y/ HV DELA Y BLUE ONL Y • BLUE ONL Y ON/BLUE ONL Y OFF GAMMA SELECT • GAMMA ST ANDARD/GAMMA FILM/ GAMMA ...

  • Panasonic BT-LH910G - page 42

    42 Main Menu (continued) “SUB WINDOW” ■ Opening the “SUB WINDOW” function splits the screen (main window) in two as shown below to enable comparison of a recorded still image with live video. Use the “SUB WINDOW” setting (FULL, P ART) in the “SYSTEM CONFIG” menu (page 34) to set up the function as shown below . Press the button ([ ...

  • Panasonic BT-LH910G - page 43

    43 Main Menu (continued) “WFM/VECTOR” ■ The “WFM/VECTOR” function enables display of the waveform and vector display . Use “DISPLA Y SETUP” in the main menu to select “WFM” and “VECTOR” display . (page 50) Press the button ([FUNCTION1] to [FUNCTION3] (page 39)) to which the “WFM/VECTOR” function has been assigned to switch ...

  • Panasonic BT-LH910G - page 44

    44 “PIXEL T O PIXEL” and “PIXEL POSITION” ■ The “PIXEL T O PIXEL” function allows you to check images at their actual pixel resolution (1080i/p signals only). Press the button ([FUNCTION1] to [FUNCTION3] (page 38)) to which the “PIXEL T O PIXEL” function has been assigned to turn the function on. Then press the button ([FUNCTION1] ...

  • Panasonic BT-LH910G - page 45

    45 Main Menu (continued) “CROSS HA TCH” ■ If the CROSS HA TCH function is used, markers are displayed at regular vertical and horizontal intervals to facilitate, for example, easy composition. The marker line width is 1 dot /1 line and the interval is 80 dots/80 lines or 40 dots/40 lines depending on the “SIZE” setting in the MARKER menu ...

  • Panasonic BT-LH910G - page 46

    46 Main Menu (continued) “FOCUS-IN-RED” ■ When the “FOCUS-IN-RED” function is used, the section that is being focused is displayed in an easy-to- understand red, making camera focus adjustments easy . Each press of the button (“FUNCTION1” to “FUNCTION3” (page 38)) to which the “FOCUS-IN-RED” has been assigned turns the functio ...

  • Panasonic BT-LH910G - page 47

    47 GPI “GPI CONTROL” is used to enable and disable GPI functions and assign functions to each of the GPI terminal pins (page 62). The underlined values are factory preset setting values. Sub menu Settings Description GPI CONTROL DISABLE ENABLE Enables and disables GPI functions <DISABLE> Disabled <ENABLE> Enabled GPI1 - GPI8 UNDEF M ...

  • Panasonic BT-LH910G - page 48

    48 Main Menu (continued) INPUT SELECT The underlined values are factory preset setting values. Sub menu Settings Description VIDEO OFF ON Sets or cancels VIDEO line for the INPUT button. * 1 FORMA T AUTO NTSC P AL Used to select the format for VIDEO input. * 2 <AUTO> NTSC or P AL is selected automatically . <NTSC> NTSC <P AL> P AL ...

  • Panasonic BT-LH910G - page 49

    49 Main Menu (continued) AUDIO Set the audio output and audio level meter . The underlined values are factory preset setting values. Sub menu Settings Description SELECT L * 1 * 2 CH1 - CH8 (Factory default: CH1) Selects embedded audio channel output to headphones (L). SELECT R * 1 * 3 CH1 - CH8 (Factory default: CH2) Selects embedded audio channel ...

  • Panasonic BT-LH910G - page 50

    50 Main Menu (continued) DISPLA Y SETUP The underlined values are factory preset setting values. Sub menu Settings Description WFM/VECTOR OFF WFM Y WFM R WFM G WFM B VECTOR Switches between “WFM/VECTOR” waveform and vector display . <WFM Y> - <WFM B> Displays waveforms. <VECTOR> Displays vector waveforms. * 1 POSITION LB RB RT ...

  • Panasonic BT-LH910G - page 51

    51 Main Menu (continued) CONTROL The underlined values are factory preset setting values. Sub menu Settings Description CONTROL LOCAL REMOTE Selects operation. (with control clock) <LOCAL> Enables front panel operation <REMOTE> Enables remote operation (front panel operation is locked) * 1 LOCAL ENABLE * 2 DISABLE INPUT Selects the disa ...

  • Panasonic BT-LH910G - page 52

    52 3D Assist Mode The unit is equipped with 3D assist mode to provide support for shooting with a rig-type 3D camera system. The 3D assist mode has the following functions. Image input method: SIMUL T ANEOUS (simultaneous method)R ■ T wo types of image, one for the left eye (L) and one for the right eye (R), are input to the two SDI1 and SDI2 ter ...

  • Panasonic BT-LH910G - page 53

    53 <Note> When a signal on which the LR information is superimposed is input to SDI1 such as when there is an • AG-3DA1 connection, that LR information is displayed on the right side of the signal format. If L and R are incorrectly input, the LR information is displayed in yellow . If the LR information is input to SDI2 only , the LR inform ...

  • Panasonic BT-LH910G - page 54

    54 3D Assist Mode (continued) MIRROR (Left/Right and T op/Bottom inversion) This function inverts just the left and right or top and bottom or both the left and right and top and bottom of the input signals of SDI2 (R) to enable the basic adjustments of a rig-type 3D camera system (half mirror type) to be made. TB MIRR MIRROR － － FUNC. Screen: ...

  • Panasonic BT-LH910G - page 55

    55 3D Assist Mode (continued) CONVERGENCE (Convergence Check) This function is for checking the subject’s position at a fixed screen position in order to determine the depth position of the main subject. Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject’s position. FUNC. MODE MANU L SLOW MANUAL SP ...

  • Panasonic BT-LH910G - page 56

    56 3D Assist Mode (continued) ZOOM FOCUS (Zoom and Focus Check) This function enlarges part of an image to enable you to check the focus offset and zoom of fset on the left and right, which tends to cause eye fatigue. FUNC. ZOOM F-IN-R － ZOOM OFF OFF Screen: The L/R 2 screens are shown side-by-side. <Assist Point> Expanding the parts that a ...

  • Panasonic BT-LH910G - page 57

    57 3D Assist Mode (continued) VERTICAL (V ertical Offset Check) This function enables you to operate two horizontal line markers to check the number of lines between markers in the displayed image and check vertical offset, which tends to cause eye fatigue. FUNC. EXP AND MARKER1 MARKER2 13 Lines DISP 384 384 VTCL The number of lines of the displaye ...

  • Panasonic BT-LH910G - page 58

    58 OVERLA Y (Parallax Check) This function displays vertical line markers to enable you to check the width of parallax. Overlay display FUNC. OVERLA Y MARKER － STD 19 OVL Y Gray display GRA Y 19 OVL Y FUNC. OVERLA Y MARKER － Screen: L/R images are overlaid and shown on one screen, and vertical line markers are shown at 3% intervals across the h ...

  • Panasonic BT-LH910G - page 59

    59 Setting Item Restrictions List of Setting Item Restrictions in 2D Mode ■ (  : Can be set and the function is enabled) Settings Input CH SDI1/SDI2 HDMI VIDEO VF YP B P R VIDEO YP B P R SD HD 640 × 480 SD HD SD HD SD HD 2D/3D ASSIST  MARKER MARKER * 1 * 2   * 3  * 3 * 3 * 3   16:9 * 1 * 2 ...

  • Panasonic BT-LH910G - page 60

    60 Settings Input CH SDI1/SDI2 HDMI VIDEO VF YP B P R VIDEO YP B P R SD HD 640 × 480 SD HD SD HD SD HD GPI GPI CONTROL  GPI1 - GPI8  INPUT SELECT VIDEO  FORMA T * 3 * 3 * 3 * 3 * 3  * 3 * 3 * 3 * 3 * 3 NTSC SETUP * 3 * 3 * 3 * 3 * 3  * 3 * 3 * ...

  • Panasonic BT-LH910G - page 61

    61 Setting Item Restrictions (continued) List of Setting Item Restrictions in 3D Assist Mode ■ (  : Can be set and the function is enabled) Settings Input CH SDI1 / SDI2 HD 2D/3D ASSIST  MARKER MARKER * 1 16:9 * 1 4:3 * 1 BACK * 1 CENTER * 1 GPI MARKER1 * 1 GPI MARKER2 * 1 MARKER TYPE * 1 CROSS HA TCH * 1 SIZE * 1 VIDEO CONFIG GAMMA SELECT ...

  • Panasonic BT-LH910G - page 62

    62 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio * 1 display , both markers are displayed. When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker * 2 selected by the 16:9 marker is controlled. REMOTE Specifications This monitor permits remote operation vi ...

  • Panasonic BT-LH910G - page 63

    63 REMOTE Specifications (continued) Assigned item Function Operating conditions GAMMA SEL. STDIO/ PST Switches the gamma curve to STDIO/PST mode. Level operation (Short-circuited: STDIO/ PST mode, Open: ST ANDARD mode) INPUT SEL. VIDEO Switches the input line to VIDEO. Edge operation INPUT SEL. SDI1 Switches the input line to SDI1. Edge operation ...

  • Panasonic BT-LH910G - page 64

    64 REMOTE Specifications (continued) Connectors and signals ■ Connector: D-SUB 9-pin (female) Signal Pin number Signal Description 1 N.C. Not connected 2 TXD T ransmission data 3 RXD Reception data 4 DSR Connected inside 5 GND Ground 6 DTR Connected inside 7 CTS Connected inside 8 RTS Connected inside 9 N.C. Not connected Communication parameters ...

  • Panasonic BT-LH910G - page 65

    65 REMOTE Specifications (continued) Setting command ■ No Command Description Data Response 1 IIS Input switch 0: SDI1 1: SDI2 2: VIDEO 3: YP B P R 5: VF 8: HDMI 9: INT SG IIS 2 VPC Image quality adjustment CON00-60 : Contrast settings BRI00-60 : Brightness settings CRO00-60 : Chroma settings PHA00-60 : Phase settings VOL00-60 : V olume settings ...

  • Panasonic BT-LH910G - page 66

    66 REMOTE Specifications (continued) No Command Description Data Response 14 MIP IP mode settings 0: MODE1 1: MODE2 MIP 15 OMO Monochrome settings 1: OFF 2: ON OMO 16 MAS SD aspect settings 0: 16:9 1: 4 :3 MAS 17 MSC Scan settings 0: NORMAL 1: UNDER MSC 18 MCO Control settings 0: LOCAL 1: REMOTE MCO 19 MLE Remote operation settings 0: DISABLE 1: IN ...

  • Panasonic BT-LH910G - page 67

    67 No Command Description Data Response 9 QCT Color temperature 00: D56 01: D65 02: D93 03: V AR1 04: V AR2 05: V AR3 10-73: USER0 - 63 10 QBM Black Mode 0: OFF 1: ON 11 QPC Sharpness SHP : Sharpness mode 0: LOW 1: HIGH SHH : Horizontal sharpness value 00-30 SHV : V ertical sharpness value 00-30 12 QIP IP mode 0: MODE1 1: MODE2 13 QMO Monochrome 1: ...

  • Panasonic BT-LH910G - page 68

    68 VF (viewfinder) Specifications VF T erminal (15P) AJ-HPX3100G (Example) This unit side VF T erminal Camera side VF T erminal Pin number Signal Description Pin number Description 1 P R P R signal 15 VF-P R 2 Y Y signal 6 VF-Y 3 P B P B signal 16 VF-P B 4 N.C. Unused - - - 5 GND GND 20 UNREG-GND 6 P R -GND GND of P R signal 5 VF-P R -GND 7 Y -GND ...

  • Panasonic BT-LH910G - page 69

    69 Error and W arning Displays If for any reason an error occurs in this monitor , the LEDs above the picture adjusting knob flash at 1 second intervals to inform of the error/warning. Error and W arning displays Symptom Remedy W arning of improper operation status for the camera settings ! is displayed. Check the setting values of the camera.* 2 N ...

  • Panasonic BT-LH910G - page 70

    70 Specifications General ■ Input power: DC12 V (1 1.0 V - 17.0 V) Input current: 1.9A (DC12 V) is the safety information. Dimensions(W×H×D):  230mm×214.5mm×170mm(includingstand)         [9-1/16inches×8-7/16inches×6-1 1/16inches](includingstan ...

  • Panasonic BT-LH910G - page 71

    71 List of Signal Formats Supported in 2D Mode ■ (  : Compatible) Input Signal Format/ Status displays VIDEO VF-VIDEO VF-YP B P R YP B P R SDI1 * 4 SDI2 HDMI NTSC   P AL   640×480(59.94Hz)  640×480(60Hz)  480/59.94i  480/59.94p    576/50i  576/50p    720/50p  72 ...

  • Panasonic BT-LH910G - page 72

    72 Specifications (continued) List of Signal Formats Supported in 3D Assist Mode ■ (  : Compatible) Input Signal Format/ Status displays SDI1/2 (SIMUL) 720/50p  720/59.94p  720/60p  1035/59.94i * 1  1035/60i * 2  1080/23.98PsF  1080/24PsF  1080/25PsF * 3  1080/50i  1080/59.94i  1080/60i  When 1035/59.94i signal ...

  • Panasonic BT-LH910G - page 73

    73 Closed Caption Decoding ■ Supported Signals Composite NTSC, P AL SD-SDI 480/59.94i, 576/50i HD-SDI 1080/60i * 1 , 720/60p * 1 , 1080/50i, 720/50p, 1080/24PsF * 1 , 1080/25PsF , 1080/30p * 1 , 1080/24p * 1 , 1080/25p Supported Standards Composite EIA/CEA-608 (VBI) SD-SDI EIA/CEA-608 (ANC) HD-SDI EIA/CEA-608 (708) , EIA/CEA-708 Supported Specifi ...

  • Panasonic BT-LH910G - page 74

    74 Specifications (continued) INT SG (Internal chart for adjustment) ■ GRAY 75% YELLOW 75% CYAN 75% GREEN 75% MAGENTA 75% RED 75% BLUE 75% -I W HITE +Q BLACK -4% BLACK BLACK +4% BLACK BLACK 0% 10% 20% 30% 40% 5 0% 60% 70% 80% 90% 100% GRAY 75% YELLOW 75% CYAN 75% GREEN 75% MAGENTA 75% RED 75% BLUE 75% -I W HITE +Q BLACK BLACK 0% 10% 20% 30% 40% 5 ...

  • Panasonic BT-LH910G - page 75

    75 Memo ...

  • Panasonic BT-LH910G - page 76

    © 2011 ユチ۹Ǡǽ⛩ॹȡ܅ȏई۰ǾƸêユ㄀ヴ㄂ㄇㄆㄕㄚチ㄀モㄅㄅㄓㄆㄔㄔハㄑㄅㄇêチǽԑ૓ȡ યӴᄙǽɢʀɀǺӱțȚǢǷƹ Ȭɩ ʀɀɻȸ̗Ꮱȸɳʀ ɟ Information on Disposal for Users of W aste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means tha ...

Manufacturer Panasonic Category Car Video System

Documents that we receive from a manufacturer of a Panasonic BT-LH910G can be divided into several groups. They are, among others:
- Panasonic technical drawings
- BT-LH910G manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic BT-LH910G
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic BT-LH910G.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic BT-LH910G, service manual, brief instructions and user manuals Panasonic BT-LH910G. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic BT-LH910G.

Similar manuals

A complete manual for the device Panasonic BT-LH910G, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic BT-LH910G by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic BT-LH910G.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic BT-LH910G - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic BT-LH910G, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic BT-LH910G, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic BT-LH910G - which should help us in our first steps of using Panasonic BT-LH910G
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic BT-LH910G
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic BT-LH910G in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic BT-LH910G?

Use the form below

If you did not solve your problem by using a manual Panasonic BT-LH910G, ask a question using the form below. If a user had a similar problem with Panasonic BT-LH910G it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)