English dropdown-ico

Manual D-Link DSL-522T

92 pages 3.48 mb
Download

Go to site of 92

Summary
  • D-Link DSL-522T - page 1

    DSL-522T ADSL Router User Guide May 2006 ESL522TEU.A1G ...

  • D-Link DSL-522T - page 2

    Table Of Contents BEFORE YO U START ...................................................................................................... IV Installation Overview .......................................................................................................... .............................iv Setup Wizard .................................. ...

  • D-Link DSL-522T - page 3

    Static Routing ................................................................................................................. .............................. 51 DMZ ............................................................................................................................ ................................. 52 Firewall ............ ...

  • D-Link DSL-522T - page 4

    DSL-522T ADSL Router User Guide About This User Guide This user’s guide provides instru ctions on how to in stall the DSL-522T ADSL Router and use it to provide Internet access for an Ethernet network or single computer. If you are using a computer with a functioning Ethern et port, the quickest and easiest way to set up the DSL- 522T is to follo ...

  • D-Link DSL-522T - page 5

    DSL-522T ADSL Router User Guide Installation Notes In order to establish a connection to the Internet it will be necessary to pr ovide information to the Router that will be stored in its memory. For some users, only their account information (Username an d Password) is required. For others, various parameters that control and define the Inte rnet ...

  • D-Link DSL-522T - page 6

    DSL-522T ADSL Router User Guide Information you will need from your ADSL service provider: Username This is the Username used to log on to your ADSL service provider’s network. It is commonly in the form − user@isp.co.uk. Your ADSL serv ice provider uses this to identify your account. Record info here Passw ord This is the Password used, in con ...

  • D-Link DSL-522T - page 7

    DSL-522T ADSL Router User Guide Information you will need about your DSL-522T ADSL Router: Username This is the Username needed access the Router’s management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is “admin.” T he user cannot ...

  • D-Link DSL-522T - page 8

    DSL-522T ADSL Router User Guide The CD-ROM shipped wi th the Router contains the USB driver software. Insert the DSL-522T CD-ROM into the CD drive. Within a few seconds you should se e a wi ndow that offers the following options: Install DSL- 522T, Quick Install Guide, View Manaual, Install Ac robat Reade r, and Exit. If y ou do not see this auto-r ...

  • D-Link DSL-522T - page 9

    DSL-522T ADSL Router User Guide 4. Click Finish to complete the InstallShield wizard. When the USB driver has been installed, insert one end of the USB cable included with the router into the DSL-522T router’s USB port. Insert the other end of t he USB cable into a USB por t on your PC. Connect the power adapter to the power input at the back pan ...

  • D-Link DSL-522T - page 10

    ...

  • D-Link DSL-522T - page 11

    DSL-522T ADSL Router User Guide 1 Introduction This section provides a brief description of the Rout er, its associated te chnologies, and a list of Router features. Router Description and Operation The DSL-522T Router is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Router combines hig ...

  • D-Link DSL-522T - page 12

    DSL-522T ADSL Router User Guide Router Features The DSL-522T ADSL Router utilize s the latest ADSL enhancements to provide a reliabl e Internet portal suitable for most small to medium si zed offices. DSL-522T advantages include: • PPP (Point-to-Point Protocol) Security – The DSL-522T ADSL Router supports PAP (Password Authentication Protocol) ...

  • D-Link DSL-522T - page 13

    DSL-522T ADSL Router User Guide Front Panel Display Place the Router in a location that permits an eas y view of the LED indicators on the front panel. The LED indicators on the front panel include Power , Status , ADSL , Ethernet , and USB . The ADSL , Ethernet , and USB indicators monitor link status and activity ( Link/Act ). Pow er Steady green ...

  • D-Link DSL-522T - page 14

    DSL-522T ADSL Router User Guide Rear Panel Connections All cable connections to th e Router are made at the r ear panel. Connect the p ower adapter here to power on the Router. Use the Reset button to re store the settings to the factory default values in the next chapte r for instructions on using the reset button). Connect netw ork cables: 1. Ins ...

  • D-Link DSL-522T - page 15

    DSL-522T ADSL Router User Guide 2 Hardware Installation The DSL-522T maintains t hree separate interfaces, an ADSL, an Ethernet, an d a USB interface. Place the Router in a location where it can be conne cted to t he various devices as well as to a power source. Th e Router should not be located where it will be exposed to moisture or excessiv e he ...

  • D-Link DSL-522T - page 16

    DSL-522T ADSL Router User Guide Network Connections Network connections are pr ovided through the ADSL port, the Ether net port and the USB port on the back of the Router. See the Rear Panel di agra m above and the illustrations below for example s . See Installing the USB Driver above for a description of t he USB driver installation procedure. Co ...

  • D-Link DSL-522T - page 17

    DSL-522T ADSL Router User Guide 3 Basic Router Configuration The first time you setup the Router it is recommended that you configure the WA N connection using a si ngle computer connected directly to the Router. Once t he WAN conne ction is functioning properly, you may continue to make chang es to Router configuration in cluding IP settings and D ...

  • D-Link DSL-522T - page 18

    DSL-522T ADSL Router User Guide Access the Configuration Manager In order to make sure your com puter’s IP settings allo w it to communicate with the Route r, it is advisable to configure your system be a DHCP client – that is, it will get IP settings from the Router. Appendix B describes how to configure different Windows operati ng systems to ...

  • D-Link DSL-522T - page 19

    DSL-522T ADSL Router User Guide Configure the Router When you successfully conne ct to the web manager, the Home directory tab will display the Setup Wizard window. You can launch the Setup Wizard from this p age or u s e the buttons located in the left panel of the web page to view other windows used for basic configuration. Click on a directory t ...

  • D-Link DSL-522T - page 20

    DSL-522T ADSL Router User Guide Wizard To use the Setup Wizard, click the Run Wizard button in the first browser window and follow the inst ructions in the pop-up window that appears. The initial window summarizes the setup process. Click the Nex t button to proceed. You may stop using the Setup Wizard at any time by clicking the Exit button. If yo ...

  • D-Link DSL-522T - page 21

    DSL-522T ADSL Router User Guide Using the Setup Wizard - Choose Time Zone Choose the time zone you are i n from the pull-down menu and cli ck Next . This sets the sys tem time used for the Router. If you wish to return to the prev ious window during the setup process, click the Back button. 11 ...

  • D-Link DSL-522T - page 22

    DSL-522T ADSL Router User Guide Using the Setup Wizard - Choose Connection Type Now select the Connection Type used for the Internet conn ection. Your ISP has given this information to you. The connection types avai lable for “Multi-User” Mode are PPPoE/PPPoA , D ynamic IP Address , Static IP Address , and Bridge Mode . Each connection type has ...

  • D-Link DSL-522T - page 23

    DSL-522T ADSL Router User Guide Using the Setup Wizard - For PPPoE/PPPoA connections: 1. Type in the Username and Passw ord used to identify and verify your account to the ISP. 2. Select the specific Conn ection Type from the drop-down menu. The available PPP connection and encapsulation types are PPPoE LLC , PPPoA LLC and PPPoA VC-Mux . 3. If you ...

  • D-Link DSL-522T - page 24

    DSL-522T ADSL Router User Guide Using the Setup Wizard - For Dynamic IP Address connections: 1. Select the specific Conne ction Type from the drop-down menu. The available Dynamic IP Address connection and encapsulation types are 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux . 2. If you are instructed to ch ange the VPI or VCI number, type in the ...

  • D-Link DSL-522T - page 25

    DSL-522T ADSL Router User Guide Using the Setup Wizard - For Static IP Address connections: 1. Select the specific Connection Ty pe from the drop-down menu. The available Static IP Address connection and enca psulation types are 1483 Brid ged IP LLC , 1483 Bri dged IP VC-Mux , 1483 Routed IP LLC , 1483 Routed IP VC-Mux and IPoA . 2. Change the IP A ...

  • D-Link DSL-522T - page 26

    DSL-522T ADSL Router User Guide Using the Setup Wizard - For Bridge Mode connections: 1. Select the specific Connection Ty pe from the drop-down menu. The available Bridge Mode connection and encapsulation types are 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux . 2. If you are instructed to ch ange the VPI or VCI number, type in the correct settin ...

  • D-Link DSL-522T - page 27

    DSL-522T ADSL Router User Guide Using the Setup Wizard - Finish and Restart Finally you can confirm that the set up pro cess is completed. If you are sa tisfied that you h ave entered all the necessary information correct ly, click the Restart button to save the new confi guration settings and restart the Router. If you need to change settings from ...

  • D-Link DSL-522T - page 28

    DSL-522T ADSL Router User Guide WAN To configure the Router’s basic configuration setting s without running the Setup Wizard, you can access the windows used to configure WAN, LA N, DHCP, and DNS se ttings directly from the Hom e directory. To access the WAN Settings window, cli ck on the WAN link button on the left side of the first window that ...

  • D-Link DSL-522T - page 29

    DSL-522T ADSL Router User Guide connection software requires the user to enter the User Name and Password for the ISP acco unt. This information is stored on the computer, not in the Router. Follow the instructions below to configur e a Bridged connection for the WAN interface. To configure a Dynamic IP Addres s connection, perform the steps listed ...

  • D-Link DSL-522T - page 30

    DSL-522T ADSL Router User Guide Dynamic IP Address A Dynamic IP Address connectio n configures the Router to automatically obtai n its global IP address from a DHCP server on the ISP’s netwo rk. The service provider assigns a glo bal IP address from a pool of addresses available to the service p rovider. Typically t he IP address assigned has a l ...

  • D-Link DSL-522T - page 31

    DSL-522T ADSL Router User Guide To configure a Dynamic IP Address connection for the WAN, follow these steps: 1. Choose the Dynamic IP Address option from the WAN Settings pull-down menu. 2. Under the ATM VC Settings at the top of the window should not be changed unless you have bee n instructed to change them. However, if you are instru cted to ch ...

  • D-Link DSL-522T - page 32

    DSL-522T ADSL Router User Guide Additional settings for Dynamic IP Address connections: Dynamic IP Parameters Description Connection Type This specifies the connection type and encapsulation method used for your Dynamic IP Address connection. The options available are Bridged IP LLC or Bridged IP VC-Mux . Cloned MAC Address This is not always neces ...

  • D-Link DSL-522T - page 33

    DSL-522T ADSL Router User Guide Static IP Address When the Router is configured to use Static IP Address assignment for the WAN con nection, you must manually assign a global IP Addres s, Subnet Mask a nd Gateway IP Addr ess used for the WAN connection. Most users will also need to config ure DNS server IP settings in the DNS Configur ation window ...

  • D-Link DSL-522T - page 34

    DSL-522T ADSL Router User Guide To configure a Static IP type connec tion for the WAN, follow these steps: 1. Choose the Static IP Address option from the WAN Settings pull-down menu. 2. Under the ATM VC Settings at the top of the window should not be changed unless you have bee n instructed to change them. However, if you are instru cted to change ...

  • D-Link DSL-522T - page 35

    DSL-522T ADSL Router User Guide Additional settings for Static IP Address connections: Static IP Parameters Description Connection Type This specifies the connection type and the encapsulation method used for your Static IP Address connecti on. The options available are Bridged IP LLC , Bridged IP VC-Mux , Routed IP LLC , Routed IP VC-Mux or IPoA . ...

  • D-Link DSL-522T - page 36

    DSL-522T ADSL Router User Guide PPPoE/PPPoA Follow the instructions below to configure the Router to use a PPPo E or PPPoA for the In ternet connection. Make sure you have all the necessary inform ation before you confi gure the WAN connection. WAN Settings w indow – PPPoE/PPPoA To set up a PPPoE or PPPoA connection: 1. If not already selected, c ...

  • D-Link DSL-522T - page 37

    DSL-522T ADSL Router User Guide 3. Under the PPPoE/PPPoA heading, type the Use r Name and Passw ord used for your ADSL account. A typical User Name will be in the form user1234@isp.co.uk. The Pass word may be assigned to you by your ISP or you may have selected it when you set up the account with your ISP. 4. Choose the Connection Type from the pul ...

  • D-Link DSL-522T - page 38

    DSL-522T ADSL Router User Guide Additional settings for PPPoE/PPPoA connections: PPPoE/PPPoA Parameters Description User Name For PPP connections, a User Name and Password are used to identify and verify your account to the ISP. Enter the User Name for your ADSL service account. User names and passwords ar e case-sensitive, so enter this informatio ...

  • D-Link DSL-522T - page 39

    DSL-522T ADSL Router User Guide ATM Traffic Shaping The ATM settings in the WAN Settings wind ows for the different connection types can be used to adj ust QoS parameters for ADSL clients. This may not be available to all ADSL accounts. ATM Settings for WAN connection Additional ATM settings fo r PPPoE or PPPoA connections: ATM Parameters Descripti ...

  • D-Link DSL-522T - page 40

    DSL-522T ADSL Router User Guide ATM VC Settings ATM VC settings can be configured fo r all connection types in the WAN configuration me nu of the Home directory. ATM VC Settings in WAN Settings w indow The table below describes the ATM VC settings used to c onfigure a PPPoE or PPPoA connection for an ADSL account. ATM VC Parameters Description PVC ...

  • D-Link DSL-522T - page 41

    DSL-522T ADSL Router User Guide LAN You can configure the LAN IP address to suit your preference. Many user s will find it convenient to use the default settings together with DHCP service to manage the IP settings fo r their p rivate network. The IP address of the Router is the base addre ss used for DHCP . In order to use the Router for DHCP on y ...

  • D-Link DSL-522T - page 42

    DSL-522T ADSL Router User Guide DHCP The DHCP server is enabled by defaul t for the Router’s Ethernet LAN inte rface. DHCP service will supply IP settings to workstations configured to automatically obtain IP settings that are co nnected to the Router though the Ethernet port. When the Ro uter is used for DH CP it beco mes the default gateway for ...

  • D-Link DSL-522T - page 43

    DSL-522T ADSL Router User Guide To display the DHCP Settings window, click the DHCP button in the Home directory. Any active DHCP Clients appear at the bottom of the window in the D HCP Clients List. The IP address and MAC address for active DHCP clients are displayed in the list. The two options for DHCP service are as follows:  You may use the ...

  • D-Link DSL-522T - page 44

    DSL-522T ADSL Router User Guide DHCP Settings w indow w ith DHCP disabled Note To manually configure IP settings on Windows workstations, open the TCP/IP Properties menu and select the “Use the following IP address” option. You will need to supply the IP addres, Subnet mask and Defualt gateway (use IP address of DSL-522T) for each workstation. ...

  • D-Link DSL-522T - page 45

    DSL-522T ADSL Router User Guide Static IP on LAN If the Router has the DHCP server enabled it is po ssibl e to permanently assign IP addresses to workstati ons specified by their MAC address. Up to five IP addresse s may be assigned to five different devices. This will take the chosen IP address used out of the available addresses in the dy nami c ...

  • D-Link DSL-522T - page 46

    DSL-522T ADSL Router User Guide DNS The Router can be configured to rel ay DNS settings from your ISP or another available service to workstations on your LAN. When using DNS relay, t he Router will accept DNS requests from hosts on the LAN and forward them to the ISP’s, or alternative DN S servers. DNS relay can use auto di scovery or the DNS IP ...

  • D-Link DSL-522T - page 47

    DSL-522T ADSL Router User Guide Dynamic DNS The Router supports DDNS (D ynamic Domain Name Service). The Dy nami c DNS service allows a dynamic public IP address to be associated with a static host nam e in any of the many domains, allowing acce ss to a specified host from various locations on the Internet. This is ena bled to allow remote access t ...

  • D-Link DSL-522T - page 48

    DSL-522T ADSL Router User Guide Save Settings and Reboot When you have configured the DSL-522 T with the settings you desire, make sure you save those settings. To save the system con figuration settings, click the Tools tab. You will be presented first with the Administrator Settings window. This windo w is described in the next chapter. To save t ...

  • D-Link DSL-522T - page 49

    DSL-522T ADSL Router User Guide Multiple Virtual Connections The Router supports multiple virtual co nnections. Up to eight PVCs to eight separate de stinations can be created and operated simultaneously utilizing the same bandwi dth. Additional PVC connections can be added for various purpo s es. For example, you may want to establish a private co ...

  • D-Link DSL-522T - page 50

    DSL-522T ADSL Router User Guide combination that is unique to the Router. These n umbers will have been already been esta blished by your service provider on their network. To add a new virtual connection: 1. Select the new PVC to configure from the pull-down menu. 2. Enter the values for the VPI and VCI given to you by your service provider. 3. To ...

  • D-Link DSL-522T - page 51

    DSL-522T ADSL Router User Guide Advanced Router Management Directory Configuration and Read-only Windows Home Click the Home tab to access the Setup Wizard, WAN Settings, LAN Management IP Configuration, DHCP Settings for LAN Setup, DNS Configuration, and Dynamic DNS Confi guration windows. See the previous chapter for a description of the Home dir ...

  • D-Link DSL-522T - page 52

    DSL-522T ADSL Router User Guide UPnP UPnP supports zero-configuratio n networking and automat ic discovery for many ty pes of networked devices. When enabled, it allows other devic es that support UPnP to dynamica lly join a network, obtain an IP address, conv ey its capabilities, and learn about the presence and capab ilities of other devices. DHC ...

  • D-Link DSL-522T - page 53

    DSL-522T ADSL Router User Guide Virtual Server Use the Virtual Server window to set up single-po rt, trigger port or static-port range forwardi ng rules applied to inbound (WAN-to-LAN) traffic. The Virtual Server func tion allows remote use rs to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-522T wi ...

  • D-Link DSL-522T - page 54

    DSL-522T ADSL Router User Guide There are many different pre-configur ed rules avail able for specific functions such a s Internet gaming, VPN, streaming and interactive multi-media, standa rd TCP/IP protocols, reserved ports, p2p, network management applications, and so on. You may also create customized rul es to manage TCP/ UDP ports. The pre-co ...

  • D-Link DSL-522T - page 55

    DSL-522T ADSL Router User Guide Custom Forwarding Rules The User category for port forwarding is used to set up customized port forwarding rules. To set up custom TCP or UDP port fo rwarding rules, follow these steps: 1. Select the User catego ry and click the Add button l ocated below the Available Rules li st. This will change the window to look ...

  • D-Link DSL-522T - page 56

    DSL-522T ADSL Router User Guide LAN Clients The LAN Clients window is used when establi shing port forwarding rules in the Virtual Serv er and Filters windows. This window can be access ed directly by clicking on the LAN Clients button in the Advanced tab. In order to use these advanced features it is necessary to have IP addresse s available for c ...

  • D-Link DSL-522T - page 57

    DSL-522T ADSL Router User Guide SNMP Simple Network Management Protocol is a standar d for internetwork and intranetwork management. SNMP Management w indow Configure these parameters for SNMP on the Router: SNMP Category Parameters SNMP Management This is used to enable or disable SNMP Agent and SNMP Traps or edit client SNMP Name, Location and Co ...

  • D-Link DSL-522T - page 58

    DSL-522T ADSL Router User Guide Filters Filter rules in the Router are put in plac e to allow or block specified traffic. The Filter Rules however can be used in a single direction to examine a nd then Allow or Deny traffic for Inbound (WAN to LAN) or Outbound (LAN to WAN) routed data. The rules are based on IP address and TCP/UDP port. Configure t ...

  • D-Link DSL-522T - page 59

    DSL-522T ADSL Router User Guide The parameters described in the table below are used to set up filter rules. Click the Apply button to put the new rule into effect. Any filt er rule configured in the menu will appear in the Filters List with the new set tings. The Router must sa ve the new settings a nd reboot before the new rules are applied. Filt ...

  • D-Link DSL-522T - page 60

    DSL-522T ADSL Router User Guide Bridge Filters Bridge filters are used to block or allow various types of packet s through the WAN interface. This may be done for security or to improve networ k efficiency. The rules are configure d for individual devices based on MAC address. Filter rules can be set up for source, destination or both. You can set ...

  • D-Link DSL-522T - page 61

    DSL-522T ADSL Router User Guide Static Routing Use Static Routing to specify a route used for data tra ffic within your Ethernet LAN or to route data on the WAN. This is used to specif y that all packets destined for a particul ar network or subnet use a predetermined gateway. Routing Table w indow To add a static route to a specific destination IP ...

  • D-Link DSL-522T - page 62

    DSL-522T ADSL Router User Guide DMZ Since some applications are not compatible with NAT, the Router su pports use of a DMZ IP address for a single host on the LAN. This IP addr ess is not protected by NAT and will therefore be visibl e to agents on the Internet with the right type of software. Keep in mind that any client PC in the DMZ will be expo ...

  • D-Link DSL-522T - page 63

    DSL-522T ADSL Router User Guide Firewall Firew all Configura tion w indow When DoS, Port Scan, or Service Filt ering Protection is enabled, it will create a firewall poli cy to protect your network against the following: Dos Protection Port Scan Protection Service Filtering SYN Flood check ICMP Redirection check FIN/URG/PSH attack Xmas Tree Scan Nu ...

  • D-Link DSL-522T - page 64

    DSL-522T ADSL Router User Guide A DoS "denial-of-service" attack is ch aracterized by an expli c it attempt by attackers to prevent legitimate users of a service from using that service. Examples include: attempts to "flood" a network, thereby preventing legitimate network traffic, attempts to disrupt connections between two mac ...

  • D-Link DSL-522T - page 65

    DSL-522T ADSL Router User Guide PPP When the WAN connection is configured for either PPPoA or PPPoE, you c an configure the Router’s PPP session to remain on all the time, or to disconnect afte r some period of no activity. You may also choose to instruct the Router to connect each time y ou want to access the WAN or the Internet. PPP Connection ...

  • D-Link DSL-522T - page 66

    DSL-522T ADSL Router User Guide ADSL The ADSL Configuration window allows the user to set the conf iguration for ADSL protocols. For most ADSL accounts the default settings ADSL2+(Multi-mode) will work. This configurat ion works with all ADS L implementations. If you have been given in structions to change the Modulation method used, sele ct the de ...

  • D-Link DSL-522T - page 67

    DSL-522T ADSL Router User Guide ATM VCC Theis window is used to configure the WAN con nection. If you are using multiple PVCs, you can change the configuration of any PVC in this window. To create new or additional PVCs, read the section on M ultiple PVCs. This window can be used as an alternative to c onfigure the same settings found on the WAN Se ...

  • D-Link DSL-522T - page 68

    DSL-522T ADSL Router User Guide Tools Click the Tools tab to reveal the window button s for variou s functions located in thi s directory. The Administrator Settings window is the first item in the Tools directory. This window is used to change the system password used to access the web manage r, to save or load Router configuration settings and to ...

  • D-Link DSL-522T - page 69

    DSL-522T ADSL Router User Guide Change System Password Click the Admin button in the Tools directory to view the the Administrator Settings menu. Unde r the Administrator Settings heading, type the New Password and Confirm Passw ord to be certain you have typed it correctly. Click the Apply button to activate the new password. Th e System User Name ...

  • D-Link DSL-522T - page 70

    DSL-522T ADSL Router User Guide Time The Router provides a number of options to maintain current date and time including SNTP. Time menu To configure system time on the Rout er, select the method used to maintain time. The options available include SNTP, using your comp uter’s system clock (def ault) or set the time and date manually. If you opt ...

  • D-Link DSL-522T - page 71

    DSL-522T ADSL Router User Guide Remote Log Us the Remote Log Settings windo w to set up logging to serve rs or computers that are located outside the LAN or subnet of the Router. Remote Log Settings w indow Select the Log Level from the pull-down menu. The levels available are: Alert, Critical, Debug, Error, Info, Notice, Panic and Warning. Type in ...

  • D-Link DSL-522T - page 72

    DSL-522T ADSL Router User Guide Save or Load Configuration File Once you have configured the Route r to your satisfaction, it is a go od idea to back up the configuration file to your computer. To save the cu rrent configur ation settings to your computer, click the Sy stem button in the Tools directory to display the Sy stem Settings window. Click ...

  • D-Link DSL-522T - page 73

    DSL-522T ADSL Router User Guide Firmware Upgrade Note Performing a Firmware Upgrade can sometim es change the configuration settings. Be sure to back-up the Router’s configurat ion settings before upgrading the firmware. Use the Firmware Upgrade wi ndow to load the latest firmware for the device. Note that the device configuration settings may re ...

  • D-Link DSL-522T - page 74

    DSL-522T ADSL Router User Guide Miscellaneous Configuration To perform a statndard Ping test fo r network connectivity, click the Misc. window button in the Tools directory to view the Miscellaneous Configuration window. Miscellaneous Configuration w indow Other functions available in Miscellaneous Configur ation menu are a Ping test and IGMP enabl ...

  • D-Link DSL-522T - page 75

    DSL-522T ADSL Router User Guide Diagnostic Test The Diagnostic Test window is used to test connectivity of the Router. A Ping test may be done through t he local or external interface to test connectivity to known IP addresses. The dia gnostics feature executes a series of test of your system so ftware and hardware connections. Use this wi ndow whe ...

  • D-Link DSL-522T - page 76

    DSL-522T ADSL Router User Guide Status Use the various read-only windows to view sy stem information and monitor performance. Device Info Use the Device Inf ormation window to quickly view basic curr ent information about the LAN and WAN interfaces and device information includi ng Firmware Version and MAC address. Device Information window 66 ...

  • D-Link DSL-522T - page 77

    DSL-522T ADSL Router User Guide DHCP Clients 67 ...

  • D-Link DSL-522T - page 78

    DSL-522T ADSL Router User Guide Log The system log displays chronological event log data. Use the navigation bu ttons to view or scroll log pages. You may also save a simple text file containing the log to your computer. Click the Save Log button and follow the prompts to save the file. View Log w indow Click Clear Log to delete the current log inf ...

  • D-Link DSL-522T - page 79

    DSL-522T ADSL Router User Guide Statistics Use the Traffic Statistics window to monitor traffic on the Ether net, or ADSL connection. Select the interface for which you want to view packe t statistics and the information will appear below. Traffic Statistics w indow Click Refresh to view traffic information. 69 ...

  • D-Link DSL-522T - page 80

    DSL-522T ADSL Router User Guide ADSL Status Use the ADSL Status window for troubleshooting the ADSL connection. ADSL Status information 70 ...

  • D-Link DSL-522T - page 81

    DSL-522T ADSL Router User Guide Help Help w indow Click the desired hyperlink to access helpfiles. 71 ...

  • D-Link DSL-522T - page 82

    DSL-522T ADSL Router User Guide A Technical Specifications General Standards: ADSL Standards • • • • • • • ANSI T1.413 Issue 2 ITU G.992.1 (G.dmt) AnnexA ITU G.992.2 (G.lite) Annex A ITU G.994.1 (G.hs) ITU G.992.5 Annex A ADSL2 Standards ITU G.992.3 (G.dmt.bis) Annex A ITU G.992.4 (G.lite.bis) Annex A Protocols: • • • • • ? ...

  • D-Link DSL-522T - page 83

    DSL-522T ADSL Router User Guide Physical and Environmental DC Inputs: Power Adapter: Input: 120V AC 60Hz Output: 9V DC, 1A Power Consumption: 11.25 Watts (max) Operating Temperature: 0° to 40°C Storage Temperature -20° to 70°C Humidity: 5% to 95% (non-condensing) Dimensions: 109 mm x 142.8 mm x 32.1 mm Weight: 200 gm EMI: CE Class B, FCC Class ...

  • D-Link DSL-522T - page 84

    DSL-522T ADSL Router User Guide B Configuring IP Settings on Your Computer In order to configure your system to receive IP settings from the Ro uter it must fi rst have the TCP/IP protocol installed. If you have an Ethern et port on your compu ter, it probably already has TCP/IP protocol installe d. If you are using Windows XP the TCP/IP is enabled ...

  • D-Link DSL-522T - page 85

    DSL-522T ADSL Router User Guide 2. In the Control Panel window, c lick Network and Internet Connections. Click Network and Internet Connections . 3. In the Network and Internet Connections window, click Netw ork Connections . Click Network Connections . 4. In the Network Connections window, right-click on Local Area Connection , then click Properti ...

  • D-Link DSL-522T - page 86

    DSL-522T ADSL Router User Guide 5. In the General tab of the Local Area Conn ection Properties window, highlight Internet Protocol (TCP/IP) under “Th is connection uses the follo wing items:” by clicking on it once. Click on the Properties button. Click Pro p erties . 6. Select “Obtain an IP address automatically ” by clicking once in the c ...

  • D-Link DSL-522T - page 87

    DSL-522T ADSL Router User Guide Windows 2000 First, check for the IP protocol and, if necessary, install it: 1. In the Window s task bar, click the Start button, point to Settings , and then click Control Panel . 2. Double-click the Netw ork and Dial-up Connections icon. 3. In the Network and Dial-up Connections window, rig ht-click the Local Area ...

  • D-Link DSL-522T - page 88

    DSL-522T ADSL Router User Guide Windows 95 and Window s 98 First, check for the IP protocol and, if necessary, install it: 1. In the Windows task ba r, click the Start button, point to Settings , and then click Con t rol Panel . Double-click the Netw ork icon. 2. The Network dialog box displays with a list of cu rrent ly installed network component ...

  • D-Link DSL-522T - page 89

    DSL-522T ADSL Router User Guide Configure Windows ME for DHCP 1. In the Control Panel window, double-click the Netw ork and Dial-up Connections icon. 2. In the Net w ork and Dial-up Connections window, right-cli ck the Network icon, and then select Properties . 3. In the Netw ork Properties dialog box, select TCP/IP , and then click Properties . 4. ...

  • D-Link DSL-522T - page 90

    DSL-522T ADSL Router User Guide C Low Pass Filters for DSL Most ADSL clients will be requi red to install a simple dev ice that prevents the A DSL line from interfering with regular telephone services. These devices are com monly re ferred to as microfilters or low pass filters. The two basic styles of low pass filters commonly used are described b ...

  • D-Link DSL-522T - page 91

    DSL-522T ADSL Router User Guide Three Port Filter Another style of filter is installed at the same point where the Ro uter co nnects to the telephone line. Only a single filter is required. The connection ports are typically labeled as follows: Line - This port connects to the wall jack. ADSL – This port connects to the Router. Phone – This por ...

  • D-Link DSL-522T - page 92

    International Offices U.S.A 17595 Mt. Herrmann Street Fountain Valley, CA 92708 TEL: 1-800-326-1688 UR L: www.d link. com Canada 2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1-905-8295033 FAX: 1- 905-8295223 UR L: www.d link. ca Europe (U. K.) 4 th Floor, Merit House Edgware Road, Colindale London NW9 5AB U.K. TEL: 44-20-8731-5555 ...

Manufacturer D-Link Category Network Router

Documents that we receive from a manufacturer of a D-Link DSL-522T can be divided into several groups. They are, among others:
- D-Link technical drawings
- DSL-522T manuals
- D-Link product data sheets
- information booklets
- or energy labels D-Link DSL-522T
All of them are important, but the most important information from the point of view of use of the device are in the user manual D-Link DSL-522T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals D-Link DSL-522T, service manual, brief instructions and user manuals D-Link DSL-522T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product D-Link DSL-522T.

Similar manuals

A complete manual for the device D-Link DSL-522T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use D-Link DSL-522T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of D-Link DSL-522T.

A complete D-Link manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual D-Link DSL-522T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the D-Link DSL-522T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the D-Link DSL-522T, that we can find in the current document
3. Tips how to use the basic functions of the device D-Link DSL-522T - which should help us in our first steps of using D-Link DSL-522T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with D-Link DSL-522T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of D-Link DSL-522T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning D-Link DSL-522T?

Use the form below

If you did not solve your problem by using a manual D-Link DSL-522T, ask a question using the form below. If a user had a similar problem with D-Link DSL-522T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)