English dropdown-ico

Manual Linear SLR

36 pages 1.33 mb
Download

Go to site of 36

Summary
  • Linear SLR - page 1

    SLR - SLC - SLD Slide Gate Oper ator Installation Guide PRINTER’S INSTRUCTIONS: INSTR,INSTL,SLR SLC SLD - LINEAR P/N: 227968 X11 - INK: BLA CK - MA TERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - FOLDING: ALB UM-FOLD - BINDING: SADDLE-STITCH C US I N T E R T E K CM L I S T E D Operator models contained in this manual conform ...

  • Linear SLR - page 2

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 2 - 227968 Revision X13 2-3-09 T able of Contents Pre-installation Information .................................. 1 B e f o r e Y o u B e g i n . . . ...................................... 1 Alwa ys Check the Gate’ s Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Gate ...

  • Linear SLR - page 3

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 1 - 227968 Revision X13 2-3-09 Pre-installation Information Before Y ou Begin... Bef ore unpacking, inspect the car ton for exterior damage. If you find damage, advise the deliv er y carrier of a potential claim. Inspect your pac kage carefully . Y ou can chec k y our accessor y box par ...

  • Linear SLR - page 4

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 2 - 227968 Revision X13 2-3-09 Wiring Specifications Ref er to the f ollowing steps f or details on pow er and accessor y wiring for the operator . AC P ower Wiring 1. Find the listing on this page corresponding to the model, voltage and horsepower r ating of your operator . 2. The dista ...

  • Linear SLR - page 5

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 3 - 227968 Revision X13 2-3-09 Mounting P ad Installation The gate operator mounts bolted to a custom poured concrete mounting pad. The pad suppor ts the operator and pre vents it from mo ving dur ing operation. An optional post mount kit is also av ailable (P/N 2120-483) which allows ins ...

  • Linear SLR - page 6

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 4 - 227968 Revision X13 2-3-09 Gate Brack et and Chain Assembly ✓ NO TE: The item numbers shown in these illustrations are f or reference only . F or the actual par t numbers, ref er to the par ts lists in the rear of this manual. Assemble a gate brack et (1) to the front edge of the ga ...

  • Linear SLR - page 7

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 5 - 227968 Revision X13 2-3-09 Operator Prepar ation Vent Plug Installation In order to k eep gear oil from spilling out dur ing shipping, gear reducers used in this gate operator has either a solid plug, or a sealed v ent plug, installed at the factory . F or oper ators with a solid plug ...

  • Linear SLR - page 8

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 6 - 227968 Revision X13 2-3-09 Operator Setup (Continued) Limit Nuts Rough Adjustment The limit nuts are not preset at the f actor y and m ust be adjusted f or the length of the gate in each installation. The limit s witches are activ ated b y two threaded nylon rotar y limit n uts which ...

  • Linear SLR - page 9

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 7 - 227968 Revision X13 2-3-09 Controller Features SHADOW/RESET PROGRAMMING BUTTONS POWE R INDICATORS DISPLAY WHIP ANTENNA OPERATION BUTTONS OPERATION AND PROGRAMMING INDICATORS ANTENNA CONNECTOR MOTOR BOAR D COVE R INPU T POWE R TERMINALS ACCESSORY POWE R TERMINALS RESET BUTTON TERMINALS ...

  • Linear SLR - page 10

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 8 - 227968 Revision X13 2-3-09 Indicator Descriptions INDICA TOR DEFINITION INDICA TION WHEN LIT DURING NORMAL OPERA TION INDICA TION WHEN LIT DURING PROGRAMMING OPERA TION PROGRAMMING 24 V OL T INPUT PO WER LOW VOL T AGE A C POWER IS PRESENT 24 V OL T DC A CCY POWER LO W VOL T AGE DC PO ...

  • Linear SLR - page 11

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 9 - 227968 Revision X13 2-3-09 T erminal Descriptions TERMINAL GROUP FUNCTION A C N 24 V OL T INPUT F ACT OR Y CONNECTED T O 24 V AC FR OM TRANSFORMER OR 24 VDC FROM CONTINUOUS DUTY DC SUPPL Y . AC DC - A CCESSOR Y POWER PRO VIDES 24 V OL T DC POWER FOR A CCESSORIES. (.5A MAX) DC + RESET ...

  • Linear SLR - page 12

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 10 - 227968 Revision X13 2-3-09 Operator Accessor y Connections 3-BUTTON ST ATIO N KEYSWITC H FIRE ACCESS SWITCH SINGLE-CHAN NEL RADIO RECEIVER WIRELESS GA TE EDGE SE NSOR MG T TRANSMITTE R PHOTOEYE FO R REVERS E PHOTOEYE FO R OPEN OBS TRUCTIO N TELEPHONE E NTR Y KEYPAD EXTERNAL POWE R SO ...

  • Linear SLR - page 13

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 11 - 227968 Revision X13 2-3-09 Basic Controller Programming Progr amming Overview The Controller can be programmed with v ar ious options for the operator . The programming fields are defined as “functions” that hav e “options”. T o make setup easier for the installer , the Con ...

  • Linear SLR - page 14

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 12 - 227968 Revision X13 2-3-09 Basic Controller Programming (Cont.) Run Alarm and Pre-start Alarm The f actor y def ault is Run Alarm on and a 3-second Pre-start Alar m. The operator’ s beeper will sound 3 seconds before the operator star ts. The options are: Run Alarm Off and Pre-star ...

  • Linear SLR - page 15

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 13 - 227968 Revision X13 2-3-09 Advanced Controller Progr amming Entering Advanced Progr amming Mode T o access and program the Advanced Programming functions, for each programming session, Adv anced Programming m ust be enabled. After exiting programming, the Advanced Pr ogramming functi ...

  • Linear SLR - page 16

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 14 - 227968 Revision X13 2-3-09 Advanced Controller Progr amming (Cont.) Auxiliary Relay Mode The A uxiliar y Rela y has nor mally open and nor mally closed contacts. The f actor y setting disables the A uxiliar y Relay . The relay can be set f or : Magloc k: • The relay will energiz ...

  • Linear SLR - page 17

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 15 - 227968 Revision X13 2-3-09 Advanced Controller Progr amming (Cont.) Soft Start/Stop Duration This function is only used with DC slide gate Model SLD . This function causes the operator to star t and stop the DC motor slowly reducing gate wear and tear (at the full open or closed posi ...

  • Linear SLR - page 18

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 16 - 227968 Revision X13 2-3-09 Advanced Controller Progr amming (Cont.) Radio Enable The Controller contains a built-in MegaCode ® radio receiv er to allow activation from up to 40 access control transmitters and two Model MGT (gate edge) transmitters . The factory default enab les the ...

  • Linear SLR - page 19

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 17 - 227968 Revision X13 2-3-09 Loop Lay out Illustration SEPARATE PEDESTRIAN GATE REQUIRED 7 FEET MINIMUM DISTANCE FROM GATE 2" 3/8" LOOP SEALANT MULTIPLE TURNS REFER TO LOOP INSTALLATION NOTES FOR DETAILS TWIST WIRE FROM END OF LOOPS BACK TO OPERATOR AT LEAST SIX TIMES PER FOO ...

  • Linear SLR - page 20

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 18 - 227968 Revision X13 2-3-09 Safety Edge Lay out Illustration #1 NOTES: 1. WIRE THESE ED GES FOR CLOSE OBSTRUCTION 2. WIRE THESE EDGES FOR OPEN OBST RUCTION 3. ON LEADING ED GE, WIRE FOR CLOSING OBSTRUCT IO N OR REVERSING IF DESIRED 4. ON TRAILING E DGE, WIRE FOR OPEN OBSTRUCTION REFER ...

  • Linear SLR - page 21

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 19 - 227968 Revision X13 2-3-09 Safety Edge Lay out Illustration #2 NOTES: 1. WIRE THESE EDGES FOR CLOSE OBSTRU CTIO N 2. WIRE THESE EDGES FOR OP EN OBSTRUCTION 3. ON LEADING EDGE, WIRE FOR CLOSING OBSTRUCTION OR REVERS ING IF DESIRED 4. ON TRAILIN G EDGE, WIRE FOR OPEN O BSTRUCTION REFER ...

  • Linear SLR - page 22

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 20 - 227968 Revision X13 2-3-09 Photoey e Installation Illustration CARE MUST BE TAKEN IN THE PLACEMENT OF PHOTOEYES TO MINIMIZE N UISANCE TRIPPING PHOTOEYE TO PROTECT FENCE LINE OUTSIDE OF PROTECTED AREA WIRED FOR OPEN OBSTRUCTIO N SEE ACCESSORY CONNECTIONS FOR DETAILS OF WIRING PHOTOEYE ...

  • Linear SLR - page 23

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 21 - 227968 Revision X13 2-3-09 Picket Gate Installation CARD READER ON STAND PICKETS SPACE SMALLER THAN 2 1/4" MESH WITH OPEN INGS SMALLER THAN 2 1/4" TO A MINIMUM HEIGHT OF 48" ABOVE G ROUND OVER ENTIRE GATE LENGTH SEPARATE PEDES TRIAN GATE REQUIRED 7 FT. MINIMUM DISTANCE ...

  • Linear SLR - page 24

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 22 - 227968 Revision X13 2-3-09 T rack Gate Installation OVERHEAD TRACK GATE WITH ADDED C-CHANNEL FOR GATE BRACKET ATTACHMEN T OVERHEAD TRACK GATE WITH ADDED BUSTLE FOR GATE BRACKET ATTACHMEN T COVER GATE WITH FABRIC WITH OPENINGS SM ALLE THAN 2 1/4" TO A MINIMUM HEIGHT OF 48" A ...

  • Linear SLR - page 25

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 23 - 227968 Revision X13 2-3-09 Dual Gate Installations T wo ope rat ors can be used in dua l gate ins tall atio ns. T he oper ator s communicate with each other through the 3-wire COMM LINK terminals. When one operator activates, the COMM LINK connection signals the other operator to act ...

  • Linear SLR - page 26

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 24 - 227968 Revision X13 2-3-09 Gate Operation Open Button Opens the gate. If the Controller is programmed to stop opening the gate at mid-trav el, a constant press of the OPEN button will override the Mid-tr av el Stop and completely open the gate. If the A uto Close Timer is set, it wil ...

  • Linear SLR - page 27

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 25 - 227968 Revision X13 2-3-09 Error Indications During abnor mal operation, the Controller’ s displays and beeper will indicate the error condition that has occurred. Entrapment If an entrapment condition occurs detected by two repeated open or close obstr uction triggers, the Control ...

  • Linear SLR - page 28

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 26 - 227968 Revision X13 2-3-09 T roubleshooting Contacting T echnical Support F or technical questions regarding Linear gate oper ators, contact the T echnical Ser vices Depar tment at: 1-800-421-1587 from 6:30 AM to 4:30 PM P acific time Operator fails to start A. If the operator has b ...

  • Linear SLR - page 29

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 27 - 227968 Revision X13 2-3-09 Model SLR Exploded View 1 31 30 29 27 33 32 34 2A 2 3 28 A 24 26 22 25 36 39 15 13 23 4 21 35 20 12 11 10 9 8 16 14 18 19 17 7 7A 28 NOTE: MAY HAVE O PTIONAL TORQUE L IMITE R 1A 1B MODEL SLR MECHANICAL P ARTS LIST REF . # P ART # DESCRIPTION 1 2300-907 Oper ...

  • Linear SLR - page 30

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 28 - 227968 Revision X13 2-3-09 Model SLC Exploded View 1 31 30 29 27 33 34 2A 2 3 24 26 22 25 36 15 13 23 4 21 35 20 12 11 10 9 8 16 14 18 19 17 7 7A 32 38 1A 1B 28 NOTE: MAY HAVE OPTIONAL TORQUE LIMITER ...

  • Linear SLR - page 31

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 29 - 227968 Revision X13 2-3-09 MODEL SLC MECHANICAL P ARTS LIST REF . # P ART # DESCRIPTION 1 2300-907 Operator Cov er 1A 2510-354 Plunger Reset Assembly 2500-2240 Plunger Reset Button 2500-2241 Plunger Extension Only 1B 2200-790 Lock f or Cover , with Ke ys 2200-824 Extra K eys 2 2110-7 ...

  • Linear SLR - page 32

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 30 - 227968 Revision X13 2-3-09 Model SLD Exploded View 1 31 30 29 27 33 32 34 2A 2 3 24 26 22 36 25 38 15 13 23 4 21 35 20 12 11 10 9 8 16 14 18 19 17 7 7A 40 1A 1B NOTE: MAY HAVE OPTIONAL TORQUE LIMITER 41 ...

  • Linear SLR - page 33

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 31 - 227968 Revision X13 2-3-09 MODEL SLD MECHANICAL P ARTS LIST REF . # P ART # DESCRIPTION 1 2300-907 Operator Cov er 1A 2510-354 Plunger Reset Assembly 2500-2240 Plunger Reset Button 2500-2241 Plunger Extension Only 1B 2200-790 Lock f or Cover , with Ke ys 2200-824 Extra K eys 2 2110-7 ...

  • Linear SLR - page 34

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 32 - 227968 Revision X13 2-3-09 Model SLD Maintenance Battery Maintenance The gel-cell batter ies in this operator require no routine maintenance. For assured continued perf or mance, they should be replaced ev er y year . If pow er is to be remov ed f or one w eek or more , disconnect th ...

  • Linear SLR - page 35

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 33 - 227968 Revision X13 2-3-09 Prev entative Maintenance General Linear gate operators are designed for many years of trouble-free operation and, under recommended operating conditions, will require only minimal maintenance. T o ensure that a unit is ready f or operation at all times, an ...

  • Linear SLR - page 36

    SLR • SLC • SLD Slide Gate Operator Installation Guide - 34 - 227968 Revision X13 2-3-09 Gate Operator Installation Checklist ❑ ❑ 1. The gate has been chec ked to make sure it is le vel and mov es freely in both directions. ❑ ❑ 2. P otential pinch areas hav e been guarded so as to be inaccessible OR ha ve contact and/or non-contact obst ...

Manufacturer Linear Category Safety Gate

Documents that we receive from a manufacturer of a Linear SLR can be divided into several groups. They are, among others:
- Linear technical drawings
- SLR manuals
- Linear product data sheets
- information booklets
- or energy labels Linear SLR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Linear SLR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Linear SLR, service manual, brief instructions and user manuals Linear SLR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Linear SLR.

Similar manuals

A complete manual for the device Linear SLR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Linear SLR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Linear SLR.

A complete Linear manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Linear SLR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Linear SLR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Linear SLR, that we can find in the current document
3. Tips how to use the basic functions of the device Linear SLR - which should help us in our first steps of using Linear SLR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Linear SLR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Linear SLR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Linear SLR?

Use the form below

If you did not solve your problem by using a manual Linear SLR, ask a question using the form below. If a user had a similar problem with Linear SLR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)