English dropdown-ico

Manual Mitsubishi UD8400U/BL

77 pages Not applicable
Download

Go to site of 77

Summary
  • Mitsubishi UD8400U/BL - page 1

    U UD8400 UD8350 This User Manual is important to you. Please r ead it befor e using your pr ojector . DLP™ PROJECTOR MODEL UD8400U UD8400LU UD8350U UD8350LU User Manual ...

  • Mitsubishi UD8400U/BL - page 2

    EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dan ...

  • Mitsubishi UD8400U/BL - page 3

    EN-3 Contents Important safeguards ........................................................................................................................ 4 Preparing your pr ojector .................................................................................................................... 6 Using the remote contr ol ..................... ...

  • Mitsubishi UD8400U/BL - page 4

    EN-4 Important safeguar ds Please read all these instructions r egar ding your projector and r etain them for futur e refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated. 2. Retain instructions The safety and operat ...

  • Mitsubishi UD8400U/BL - page 5

    EN-5 Important safeguards (continued) WARNING: Unplug immediately if there is something wrong with your pr ojector . Do not operate if smoke, strange noise or odor comes out of your projector . It might cause fire or electric shock. In this case, unplug immediately and contact your dealer . Never remove the cabinet. This projector contains high vo ...

  • Mitsubishi UD8400U/BL - page 6

    EN-6 Pr eparing your projector 1 Checking accessories The following accessories are pr ovided with this projector . Check to be sure that all of the accessories ar e packed in the package. Cables Remote control parts Remote control (290P188-10) RS-232C cable (246C598-20) R6 (size-AA) battery (two) RGB cable for PC (246C597-20) Others • Lens cap ( ...

  • Mitsubishi UD8400U/BL - page 7

    EN-7 Overview The illustrations of the control ar ea and terminal panel in this manual show those of UD8400U and UD8400LU. 3 4 7 5 6 10 8 1 9 11 21 2 6 7 8 9 10 1 3 4 5 2 1 Indicators 2 Air inlet grille/Filter cover 3 Air outlet grille 4 Lens 5 Remote control sensor (fr ont) 6 Mitsubishi logo plate position (Put the plate according to the installat ...

  • Mitsubishi UD8400U/BL - page 8

    EN-8 2 1 12 34 5 Preparing your projector (continued) Bottom side Indicators 1 Lock bar (SECURITY ANCHOR) • Attachachain,etc.tothislockbartoanchor the projector. 2 Adjustment feet 1 FIL TER indicator 2 ST A TUS indicator 3 LAMP 2 indicator 4 LAMP 1 indicator 5 POWER indicator 2 29 22 23 25 15 13 16 17 18 19 12 21 ...

  • Mitsubishi UD8400U/BL - page 9

    EN-9 Using the r emote control Using the wir ed r emote contr ol Attached remote contr ol for this projector can be used as a wired r emote control with remote contr ol cable. Wired remote contr ol is useful for operating in a distance or outside of the operating area. REMOTE 2 IN REMOTE 2 OUT REMOTE 2 IN • Forconnection,usethepin- ...

  • Mitsubishi UD8400U/BL - page 10

    EN-10 Using the remote control (continued) Setting the ID number of the r emote contr ol Y ou can control multiple projectors collectively or individually using one remote contr ol by setting the ID number (CONTROLLER ID) of the remote contr ol. T o control multiple projectors using the r emote control, you need to select the pr ojector’ s ID num ...

  • Mitsubishi UD8400U/BL - page 11

    EN-11 Setting up your pr ojector Befor e setting up Before setting up the pr ojector , check the operating environment. If the environmental r equirements are not satisfied, the pr ojector may break down or fail. Setup environment The allowable operating temperature varies depending on the pr ojection angle. For floor installation (projection ang ...

  • Mitsubishi UD8400U/BL - page 12

    EN-12 Setting up your pr ojector (continued) Setup adjustment How to turn on the projector When you have to turn on the projector for setup adjustment, see the following pages: • Pluggingthepowercord(page20) • T ur ningonthepower(page22) • T ur ningof fthepower(page23) Adjusting the positi ...

  • Mitsubishi UD8400U/BL - page 13

    EN-13 Setting the pr ojector postur e Y ou can select the posture of the projector . Set COOLING CONDITION in the INST ALLA TION 1 menu according to the postur e. Important: • Inconsistencybetweentheprojectorpostur eand the menu settings may cause breakdown or failur e of the projector or the lamp. • Whenyouuset ...

  • Mitsubishi UD8400U/BL - page 14

    EN-14 Setting up your pr ojector (continued) Corr ecting skewed or distorted image For the best projection, pr oject images on a flat screen installed at 90 degrees to the floor . If necessary , tilt the projector using the two adjustment feet on the bottom of the projector . Adjustment feet Screen 1. Tilt up the pr ojector to the appropriate ang ...

  • Mitsubishi UD8400U/BL - page 15

    EN-15 Setting up your pr ojector (continued) • WhentheKEYSTONE-modeadjustmentis performed, the displayed image may be distorted. • Dependingontheinstallationconditionsofthe projector and the scr een, a perfect rectangular image and the proper aspect ratio may not be obtained. Slight distortion can be co ...

  • Mitsubishi UD8400U/BL - page 16

    EN-16 Setting up your pr ojector (continued) Adjustment using the CURVED mode T o adjust images projected on a curved surface, press the ENTER/GEOMETR Y button on the projector or the GEOMETR Y button on the remote control to display the CURVED mode, and then pr ess the  ,  ,  or  button to correct the distortion. CURVED ARC SELECT : BL ...

  • Mitsubishi UD8400U/BL - page 17

    EN-17 • Whentheverticalarcadjustmentispositive(+)(or the ARC is adjusted in the  direction) Press the  button. Press the  button. Press the  button. Press the  button. When you press the  or  button in the RESET mode, the distortion correction is r eset. Important: • WhentheCURVED-mode ...

  • Mitsubishi UD8400U/BL - page 18

    EN-18 Setting up your pr ojector (continued) Fr ont pr ojection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installation. For details, consult your dealer . • Thewarrantyonthisprojectordoesnotcoverany damage caused by use of any non-recomme ...

  • Mitsubishi UD8400U/BL - page 19

    EN-19 2 1 Viewing computer images 2 1 A. Connecting the pr ojector to a computer Preparation: • Makesurethatthepowerofthepr ojectorandthatofthecomputerareturnedoff. • Whe ncon necti ngth ep roj ector to ade sktop comp ute r ,dis conne ctth eR GBca blet hat ...

  • Mitsubishi UD8400U/BL - page 20

    EN-20 Viewing computer images (continued) 1. Plug the attached power cor d into the power cord inlet of this projector . 2. Plug the other end of the power cor d into a power outlet. • ThepowercordsforuseintheU.S.andEur opeareincludedwiththisprojector .Usetheappropriateoneforyour c ...

  • Mitsubishi UD8400U/BL - page 21

    EN-21 C. Installing the terminal cover This projector includes a terminal cover . If necessary , install the terminal cover to the projector . 1. Fit two hooks of the terminal cover into the pr ojector . (a) Viewing computer images (continued) VIDEO IN S-VIDEO IN IN-1 (b) Y ou can use the buttons on the operation panel by removing the door of the t ...

  • Mitsubishi UD8400U/BL - page 22

    EN-22 Viewing computer images (continued) D. Pr ojecting images Preparation: • Removethelenscap. COMPUTER 1, 2 buttons Main power switch POWER indicator LAMP 2 indicator LAMP 1 indicator DVI-D(HD CP) button ENTER button  ,  ,  ,  buttons POWER button (ON/ST ANDBY)  ,  ,  ,  buttons COMPUTER/DVI-D button ENTER b ...

  • Mitsubishi UD8400U/BL - page 23

    EN-23 Viewing computer images (continued) 9. Pr ess the ZOOM/FOCUS button to display the ZOOM/FOCUS menu. 10. Adjust with the  or  button to get an approximate size. • WhentheENTERbuttonispressedwhiletheZOOM/FOCUSmenuisdisplayed,theadjustmentmodeis switched between F AST and STEP . When F A ...

  • Mitsubishi UD8400U/BL - page 24

    EN-24 Blanking the screen temporarily (BLANK) The video signal is temporarily muted when the BLANK button is pressed. The scr een tur ns black. Y ou will hear a mechanical shutter sound inside the projector . T o cancel muting, press the BLANK button again. AUTO POSITION button When the image supplied from the computer is displaced, carry out the f ...

  • Mitsubishi UD8400U/BL - page 25

    EN-25 Viewing computer images (continued) Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the scr een to be used or your preference. How to change the settings: With the remote contr ol: 1. Pr ess the ASPECT button. • ...

  • Mitsubishi UD8400U/BL - page 26

    EN-26 Viewing video images Connecting to a video player , etc. 1. Connect one end of a commercially available BNC cable to the VIDEO IN terminal of the projector . 2. Connect the other end of the BNC cable to the video output terminal of the video equipment. When the video equipment is equipped with the S-video output terminal, make the connection ...

  • Mitsubishi UD8400U/BL - page 27

    EN-27 Viewing video images (continued) Projector + DVD player or HDTV decoder Some DVD players have an output connector for 3-line fitting (Y , C B , C R ). When connecting such DVD player with this projector , use the COMPUTER/COMPONENT VIDEO IN-2 terminals. C B (P B ) Y C R (P R ) B G R DVD player or HDTV decoder COMPUTER/COMPONENT VIDEO IN-2 BN ...

  • Mitsubishi UD8400U/BL - page 28

    EN-28 Connection (for video equipment having a DVI-D terminal) Equipment having a DVI-D terminal T o DVI-D terminal DVI cable (option) COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) • ForconnectiontotheDVI-Dterminal,useacommerciallyavailableDVIcable. • Somecablesmaynotbeconnectedcorrectly ...

  • Mitsubishi UD8400U/BL - page 29

    EN-29 Viewing video images (continued) D. Pr ojecting images Preparation: • Removethelenscap. COMPUTER 1, 2 buttons Main power switch POWER indicator LAMP 2 indicator LAMP 1 indicator DVI-D(HDCP) button S-VIDEO button VIDEO button VIDEO/HDMI/SDI button SDI button HDMI button ENTER button  ,  ,  ,  buttons POWER button (ON/ ...

  • Mitsubishi UD8400U/BL - page 30

    EN-30 7. Adjust the position of the pr ojector to keep an appropriate pr ojection distance with which images are projected in their specified sizes. 8. Adjust the position of the pr ojector so that the projector and the scr een are perpendicular to each other . (See page 11.) • Whentheprojectorcannotbepositionedperpendicular ...

  • Mitsubishi UD8400U/BL - page 31

    EN-31 Menu operation Y ou can make various settings using the displayed menus. Following 8 menus are displayed. IMAGE menu (page 33) INSTALLATION 1 menu (page 34) FEATURE menu (page 37) SIGNAL menu (page 39) INSTALLATION 2 menu (page 35) MULTI-SCREEN menu (page 36) NETWORK menu (page 40) INFORMATION menu (page 41) COMPUTER 0 COLOR 0 TINT 0 SHARPNES ...

  • Mitsubishi UD8400U/BL - page 32

    EN-32 How to set the menus 1. Pr ess the MENU button. • Themenuselectionbarisdisplayed. IMAGE 1 1 2 2 opt. Selectable menus are displayed by icons. (The menu icon being selected is displayed on a blue background.) The name of the menu being selected is displayed. 2. Pr ess the  or  button to select a menu to use. 3. Pr ...

  • Mitsubishi UD8400U/BL - page 33

    EN-33 IMAGE menu COMPUTER 0 COLOR 0 TINT 0 SHARPNESS ADVANCED MENU NCM SUPER RESOLUTION IMAGE 1 1 2 2 BRIGHTNESS 0 COLOR ENHANCER AUTO CONTRAST ST ANDARD COLOR TEMP . opt. IMAGE ADV ANCED MENU 1 2 opt. NOISE REDUCTION CTI INPUT LEVEL OFF CLOSED CAPTION OFF OFF 0 12 0 ENTER OFF ITEM SETTING FUNCTION COLOR ENHANCER AUTO Select to optimize the setting ...

  • Mitsubishi UD8400U/BL - page 34

    EN-34 INSTALLATION 1 menu INST ALLA TION 1 LENS LOCK LENS SHIFT LOCK ZOOM/FOCUS LOCK LENS SHIFT RESET OFF OFF COOLING CONDITION TEST PA TTERN INST ALLA TION 1 LAMP MODE LAMP SELECT ST ANDARD 1H/24H LOW OFF ST ANDARD 0° DUAL LAMP RELA Y CROSS HA TCH HIGH AL TITUDE MODE 1 2 ST ANDBY MODE IMAGE REVERSE LENS LOCK 1 1 2 2 opt. 1 1 2 2 opt. ENTER OK ITE ...

  • Mitsubishi UD8400U/BL - page 35

    EN-35 INSTALLATION 2 menu REMOTE 1 MODE FIL TER MENU INST ALLA TION 2 AUTO POWER ON AUTO POWER OFF OFF ON BLUE AUTO 5min IMAGE CAPTURE SPLASH SCREEN DVI LONG CABLE BACK COLOR 1 1 2 2 opt. ON ENTER ENTER SETUP ITEM SETTING FUNCTION AUTO POWER ON ON / OFF When ON is chosen, the projector is automatically turn on when the power cord is plugged in the ...

  • Mitsubishi UD8400U/BL - page 36

    EN-36 MUL TI-SCREEN menu MUL TI-SCREEN EDGE BLENDING SETTING OFF OFF EDGE ADJUST COLOR MA TCHING SETTING MEASURED DA TA MANUAL MEASURE 1 1 2 2 opt. ITEM SETTING FUNCTION EDGE BLENDING OFF Select when using the projector alone. ON Select when using the projector to configur e the multi-screen consisting of multiple projectors. The following setting ...

  • Mitsubishi UD8400U/BL - page 37

    EN-37 FEA TURE menu LANGUAGE ADVANCED MENU FEA TURE ASPECT PROJECTOR ID NORMAL (FULL) A AUTO English GROUP ID ALL DISPLA Y INPUT ENTER CINEMA MODE P ASSWORD FUNCTION MENU POSITION 1 1 2 2 opt. RESET ALL OK FEA TURE ADVANCED MENU SETUP SCART INPUT AUTO AUTO OFF STANDARD OFF 2 2 VIDEO SIGNAL LAMP WARNING HIDE OSD LAMP 1 TIME RESET OK LAMP 2 TIME RESE ...

  • Mitsubishi UD8400U/BL - page 38

    EN-38 ITEM SETTING FUNCTION SCAR T INPUT ON / OFF Choose ON when connecting the projector with a device equipped with the SCART terminal that can output RGB signal. SCAR T terminal is used mainly in Europe. Choose OFF normally . (Available only for the input signal from the COMPUTER/COMPONENT VIDEO IN-1 terminal.) LAMP W ARNING ST ANDARD When the l ...

  • Mitsubishi UD8400U/BL - page 39

    EN-39 SIGNAL menu R G B R G B V H A U 0 100% COMPUTER INPUT AUTO OVER SCAN HOLD USER FINE SYNC. SIGNAL 1 1 2 2 VE RT . POSITION 0 MEMORY CALL RESOLUTION (MEMORIZE ) AUTO HORIZ. POSITION 0 TRACKING opt. 1 1 2 2 opt. SIGNAL RESOLUTION (MEMORIZE) VERTICAL FREQUENCY HORIZONT AL FREQUENCY HORIZ. PIXELS VER T. LINES EXECUTE CANCEL 60.00 Hz 1 48.36 KHz 10 ...

  • Mitsubishi UD8400U/BL - page 40

    EN-40 NETWORK menu CONTROL SYSTEM NETWORK P ASSWORD NETWORK 1 1 2 2 NETWORK CERTIFICA TION PROJECTOR NAME IP CONFIG NETWORK RESET opt. ST ANDARD NETWORK IP CONFIG 1 2 opt. DHCP IP ADDRESS SUBNET MASK DEF AUL T GATEW AY 0. 0. 0. 0 0. 0. 0. 0 0. 0. 0. 0 MAC ADDRESS 12 ENTER ENTER OK ON ON ITEM SETTING FUNCTION PROJECTOR NAME *****... Displays PROJECT ...

  • Mitsubishi UD8400U/BL - page 41

    EN-41 INFORMA TION menu 60.00 Hz RESOLUTION 1024 x 768 VERTICAL FREQUENCY 48.36 kHz 5WIRE HORIZONT AL FREQUENCY SYNC. TYPE SERIAL NUMBER INFORMA TION 1 1 2 2 FIL TER TIME ***** H / **** TIMES ******** ... NEXT LAMP RELA Y COMPUTER1 INPUT opt. * D ** H RG HV B LAMP 1 TIME (LOW) LAMP 2 TIME (LOW) **** H **** H ITEM DESCRIPTION LAMP 1 TIME (LOW) This ...

  • Mitsubishi UD8400U/BL - page 42

    EN-42 Adjusting pr ojected images T o adjust the brightness (CONTRAST and BRIGHTNESS): Y ou can make adjustments for the brightness of the projected image using the menu. (See page 32 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pr essing the  or  button. 3. Adjust the selected item by pr essing the  or ...

  • Mitsubishi UD8400U/BL - page 43

    EN-43 T o cancel the menu: 7. Pr ess the MENU button. T o enable the stored color temperature: 1. Set COLOR TEMP . to USER in the IMAGE menu. About color temperature Color temperature is a way to show the dif ferences in white. White of which temperature is low appears r eddish. When the color temperature rises, white appears bluish. For example, y ...

  • Mitsubishi UD8400U/BL - page 44

    EN-44 Adjusting the fineness of the image (SUPER RESOLUTION): Y ou can adjust the fineness of the image using the menu. (See page 32 for menu setting.) With the IMAGE menu: 1. Display the IMAGE menu. 2. Select SUPER RESOLUTION by pr essing the  or  button. 3. Pr ess the  or  button to select ON . 4. Pr ess the ENTER button. 5. Make ad ...

  • Mitsubishi UD8400U/BL - page 45

    EN-45 Adjusting pr ojected images (continued) How to adjust the computer image This projector automatically selects a pr oper signal format according to the type of video signal supplied from the computer . However , video signals from the computer may not be projected corr ectly depending on the types of the computer and images to be projected. In ...

  • Mitsubishi UD8400U/BL - page 46

    EN-46 How to adjust the image supplied from the computer using the menu: Carry out the following procedur es according to the symptoms. Wide strips appear . ��������������� Adjust TRACKING in the SIGNAL menu. The projected image flickers. The projected image is blurr ed. ...................................... Adjust F ...

  • Mitsubishi UD8400U/BL - page 47

    EN-47 11. Press the ENTER button. SETTING - BLACK LEVEL INTERLOCKED RED GREEN ON 0 0 BLUE 0 12. Select an item you want to set by pressing the  or  button. • Adjusttheblacklevelinareasotherthanthe overlapped areas. • WhenyousetINTERLOCKEDtoON,youcan adjust RED, GREEN, and BLUE simul ...

  • Mitsubishi UD8400U/BL - page 48

    EN-48 7. Select an item you want to set by pr essing the  or  button. • Selectthecoloryouwanttoadjustusing COLOR. 8. Select a setting value by pr essing the  or  button. • Y oucanenternumbersbypressingthenumber buttons (0 to 9) while holding down the NUM button on the remote c ...

  • Mitsubishi UD8400U/BL - page 49

    EN-49 Initial network settings Y ou can set the network of the projector using the menu. NETWORK CONTROLLER NETWORK P ASSWORD NETWORK 1 1 2 2 NETWORK CE RT IFIC AT ION PROJECTOR NAME IP CONFIG NETWORK RESET opt. ST ANDARD ENTER ENTER OK ON Setting Pr ojector Name (See page 32 for menu setting.) 1. Display the NETWORK menu. 2. Pr ess the  or  ...

  • Mitsubishi UD8400U/BL - page 50

    EN-50 6. Enter the NEW NETWORK P ASSWORD and CONFIRM NETWORK P ASSWORD. • Passwordcanbesetusingupto32characters including alphabets (capital/small) or numeric characters. ← key: ............. Shifting the position of enter cursor to the left for each character . → key: ............. Shifting the position of enter ...

  • Mitsubishi UD8400U/BL - page 51

    EN-51 6. When selecting OK, the setting is completed as the IP ADDRESS stored. However , when selecting CANCEL, the setting is completed without storing. • Whenthesettingyouenterediscorr ect,the setting change dialog is displayed. After the dialog disappears, the NETWORK menu is displayed. If the entered content is not ...

  • Mitsubishi UD8400U/BL - page 52

    EN-52 Initialization of Network Settings (See page 32 for menu setting.) 1. Display the NETWORK menu. 2. Pr ess the  or  button to select NETWORK RESET . NETWORK RESET OK 3. Pr ess the ENTER button. • Conrmationdialogappears. 4. If pr essing the ENTER button again, the Network Settings can be initialized. • Itmaytake? ...

  • Mitsubishi UD8400U/BL - page 53

    EN-53 Lamp r elay Using the lamp relay function, you can pr oject images continuously . The lamp relay function automatically rests or switches the lamps. The lamp r elay is performed when LAMP SELECT in the INST ALLA TION 1 menu is set to DUAL or SINGLE. Setting the lamp r elay interval When LAMP SELECT is set to DUAL: Either of the lamps is autom ...

  • Mitsubishi UD8400U/BL - page 54

    EN-54 • Immediatelyafterthepower -on,duringthelamp selection, or during the lamp relay operation, you cannot change the setting of LAMP SELECT and LAMP RELA Y . • Inthecaseofcontinuousprojection,thelampsmay deteriorate earlier unless they are turned off for 1 hour per week. • Whenusi ...

  • Mitsubishi UD8400U/BL - page 55

    EN-55 • Theimagewithintheouteredgesofthered frame is captured. • ThecapturedimageisdisplayedintheREAL mode automatically . CAPTURE : ENTER + ENTER CANCEL : MENU CAPTURE : ENTER X2 CANCEL : MENU 12.Adjust the size of the image to be captured so that such image stays within the red frame. ? ...

  • Mitsubishi UD8400U/BL - page 56

    EN-56 Passwor d function This projector is equipped with the passwor d function that is designed for prevention of wr ong operation by children and r estriction on operation by other than specified users. The password function has 3 modes as follows. DISPLA Y INPUT .......... When the projector is turned on, the startup scr een (or splash screen) ...

  • Mitsubishi UD8400U/BL - page 57

    EN-57 Split Y ou can split the screen in two and display a computer image on the left screen and a video image on the right screen. Left screen Right screen T o use the split mode: 1. Pr ess the SPLIT button on the remote contr ol. • Thescreenissplitintwoandtheleftandright screens display the following images: ...

  • Mitsubishi UD8400U/BL - page 58

    EN-58 Important: • WhenyousetCONTROLSYSTEMtoCRESTRON in the NETWORK menu, the web control for Crestr on is enabled. For such control, Adobe Flash Player should be installed in advance. Y ou can download Adobe Flash Player from the website of Adobe Systems Incorporated. • WhenyousetCONTROLSYSTEMtoCRES ...

  • Mitsubishi UD8400U/BL - page 59

    EN-59 Connection For details of the connection, see “LAN control UTILITY operation manual” in the CD-ROM. When ST ANDBY MODE of the INST ALLA TION 1 menu of the projector is set to LOW , the LAN network is disabled. T o enable the LAN network, set ST ANDBY MODE to ST ANDARD. (See page 34 .) Configure the initial network settings first. Y ou c ...

  • Mitsubishi UD8400U/BL - page 60

    EN-60 Monitoring and contr ol using SERIAL terminal Using the SERIAL terminal, you can monitor and control multiple pr ojectors collectively or individually . • For details, contact your dealer . T o RS-232C terminal T o SERIAL IN T o SERIAL IN T o SERIAL IN T o SERIAL OUT T o SERIAL OUT RS-232C cable RS-232C cable • See also the instruction ...

  • Mitsubishi UD8400U/BL - page 61

    EN-61 Contr ol by a contr ol panel, etc. When installing the projector in a place wher e the remote control signals cannot r each the projector , you can control the projector using a contr ol panel or other device connected to the REMOTE 1 IN terminal. ON POWER COMPUTER1 OFF ON BLANK OFF Remote control External contact control COMPUTER2 VIDEO S-VI ...

  • Mitsubishi UD8400U/BL - page 62

    EN-62 Replacing the lamp This projector is equipped with 2 lamps to pr oject images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to r eplace the lamp with a new lamp separately sold that is exclusive to this projector . Contact your ...

  • Mitsubishi UD8400U/BL - page 63

    EN-63 Replacing the lamp (continued) 3. Loosen thr ee screws (c) that ar e securing the lamp box to be removed using a Philips scr ewdriver . (c) (c) LAMP 2 LAMP 1 4. Pull the handle. 5. Pull out the lamp box by the handle while holding the projector . • Pull the lamp box out of the projector slowly . When the lamp is broken, glass fragments m ...

  • Mitsubishi UD8400U/BL - page 64

    EN-64 When removing the lamp fr om the ceiling-mounted projector When removing the lamp fr om the ceiling-mounted projector , use the lamp replacement tray packed with the projector or option lamp to pr event glass fragments from scattering. • Assemblethelampreplacementtrayaccor dingtotheprocedureshownonit. 1. ...

  • Mitsubishi UD8400U/BL - page 65

    EN-65 Automatic cleaning filter This projector is equipped with an automatic cleaning filter . The burdensome filter cleaning is automatically carried out. • Whenthepoweroftheprojectorison,thelteris cleaned after the designated time elapses. • When the cumulative operation time since the last cleanin ...

  • Mitsubishi UD8400U/BL - page 66

    EN-66 Automatic cleaning filter (continued) How to clean the automatic cleaning filter Check the amount of dust through the dust check window of the filter cover and clean it, if necessary . Before cleaning the filter , be sure to turn off the main power switch of the projector and unplug the power cord fr om the outlet. • Whenthedus ...

  • Mitsubishi UD8400U/BL - page 67

    EN-67 T roubleshooting Before asking for r epair of the projector , check the following. If the symptom persists, stop using the projector , be sure to unplug the power plug, and then contact your dealer . No image appears on the screen. Problem Solution Power can not be turned on. • Checkwhethertheindicatorsareonorof f ...

  • Mitsubishi UD8400U/BL - page 68

    EN-68 T roubleshooting (continued) No image appears on the screen. (continued) Problem Solution The screen for entering the password appears. • P ASSWORDFUNCTIONintheFEA TUREmenuhasbeensettoDISPLA YINPUT to enable the password lock.  Enter the password or contact the person in char ge of management of the ...

  • Mitsubishi UD8400U/BL - page 69

    EN-69 T roubleshooting (continued) Images are not displayed corr ectly . (continued) Problem Solution Tint in projected images is incorrect. • CheckthatCOMPUTERINPUTintheSIGNALmenuiscorrectlyset.(Seepage39.) • Checkthatthecableconnectedtotheexternaldeviceisn’tbroken.? ...

  • Mitsubishi UD8400U/BL - page 70

    EN-70 T roubleshooting (continued) Others (continued) Problem Solution Abnormal sound is heard. • Becausethecolorwheelspinsatahighspeed,metallicsoundsmaybeheardinrar e occasions. Such symptom is not a malfunction. • Thoughtherotationsoundofthecolorwheelmaybecome ...

  • Mitsubishi UD8400U/BL - page 71

    EN-71 Indicators This projector has 5 indicators, each of which shows the operation condition of the pr ojector . The following offer solutions to possible pr oblems. If these problems persist, turn the projector off and consult your dealer . POWER indicator FIL TER indicator LAMP 1 indicator ST A TUS indicator LAMP 2 indicator  POWER, ST A TUS, ...

  • Mitsubishi UD8400U/BL - page 72

    EN-72 Specifications The specifications and outside appearance of the projector ar e subject to change without prior notice. T ype DLP™ projector Model UD8400U/UD8400LU/UD8350U/UD8350LU Display technology 0.67-inch Single chip DMD Pixel 192 0 x 1 200 = 2304000 pixels Projection lens F 2.0 - 2.4* 1 f= 24.5 - 33.1 mm* 1 Light-source lamp 330 W x ...

  • Mitsubishi UD8400U/BL - page 73

    EN-73 Specifications (continued) Specification of RGB signals in each computer mode of the projector Signal mode Resolution (H x V) Horizontal frequency (kHz) V ertical frequency (Hz) Normal mode (H x V) Real mode (H x V) TV60, 480i (525i) 720 x 480 15.73 59.94 1600 x 1200 - *1 TV50, 576i (625i) 720 x 576 15.63 50.00 1600 x 1200 - *1 1080i60 (112 ...

  • Mitsubishi UD8400U/BL - page 74

    EN-74 Specifications (continued) Specification of RGB signals in each computer mode of the projector (continued) Important: • Some computers aren’ t compatible with the projector . • The projector’ s maximum resolution is 19 20 x 1200 pixels. It may not display images of higher resolutions than 1920 x 1200 corr ectly . • Images ...

  • Mitsubishi UD8400U/BL - page 75

    EN-75 490 201 119 * 421 Dimension drawings (unit: mm) 490 506 201 119 * Without terminal cover With terminal cover Connectors SERIAL IN/OUT (D-SUB 9-pin) 1 5 6 9 Pin No. Name I/O 1 – – 2 TXD IN 3 RXD OUT 4 – – 5 GND – 6 – – 7 – – 8 – – 9 – – COMPUTER/COMPONENT VIDEO IN-1 (Mini D-SUB 15-pin) 1 5 11 6 10 15 Pin No. Spec. Pin ...

  • Mitsubishi UD8400U/BL - page 76

    EN-76 Specifications (continued) Specification of the attached lens (for UD8400LU and UD8350LU) With tele throw zoom lens (OL-XD2000TZ) F No. F2.2 - 2.7 Focal distance f = 40.7 - 65.1 mm Zoom/focus Electric drive Screen size (16:10) Projection distance (L) Lens shift height Lens shift width (W1) Diagonal size Width (W) Height (H) Shortest (Wide) ...

  • Mitsubishi UD8400U/BL - page 77

    1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T S U B I S H I E L E C T R I C C O R P O R A T I O N U-C ...

Manufacturer Mitsubishi Category Video projector

Documents that we receive from a manufacturer of a Mitsubishi UD8400U/BL can be divided into several groups. They are, among others:
- Mitsubishi technical drawings
- UD8400U/BL manuals
- Mitsubishi product data sheets
- information booklets
- or energy labels Mitsubishi UD8400U/BL
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mitsubishi UD8400U/BL.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mitsubishi UD8400U/BL, service manual, brief instructions and user manuals Mitsubishi UD8400U/BL. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mitsubishi UD8400U/BL.

Similar manuals

A complete manual for the device Mitsubishi UD8400U/BL, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mitsubishi UD8400U/BL by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mitsubishi UD8400U/BL.

A complete Mitsubishi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mitsubishi UD8400U/BL - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mitsubishi UD8400U/BL, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mitsubishi UD8400U/BL, that we can find in the current document
3. Tips how to use the basic functions of the device Mitsubishi UD8400U/BL - which should help us in our first steps of using Mitsubishi UD8400U/BL
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mitsubishi UD8400U/BL
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mitsubishi UD8400U/BL in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mitsubishi UD8400U/BL?

Use the form below

If you did not solve your problem by using a manual Mitsubishi UD8400U/BL, ask a question using the form below. If a user had a similar problem with Mitsubishi UD8400U/BL it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)